diff --git a/settings.js b/settings.js index 27b33a0..65a44aa 100644 --- a/settings.js +++ b/settings.js @@ -1,144 +1,144 @@ -/** - * Copyright 2013 IBM Corp. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - **/ - -// The `https` setting requires the `fs` module. Uncomment the following -// to make it available: -//var fs = require("fs"); - -module.exports = { - // the tcp port that the Node-RED web server is listening on - uiPort: '%%port%%', - uiHost: '%%bind%%', - - // By default, the Node-RED UI accepts connections on all IPv4 interfaces. - // The following property can be used to listen on a specific interface. For - // example, the following would only allow connections from the local machine. - //uiHost: "127.0.0.1", - yunkong2Instance: '%%instance%%', - yunkong2Config: '%%config%%', - - // Retry time in milliseconds for MQTT connections - mqttReconnectTime: 15000, - - // Retry time in milliseconds for Serial port connections - serialReconnectTime: 15000, - - // Retry time in milliseconds for TCP socket connections - //socketReconnectTime: 10000, - - // Timeout in milliseconds for TCP server socket connections - // defaults to no timeout - //socketTimeout: 120000, - - // Maximum number of lines in debug window before pruning - debugMaxLength: 1000, - - // The file containing the flows. If not set, it defaults to flows_.json - flowFile: 'flows.json', - - // To enabled pretty-printing of the flow within the flow file, set the following - // property to true: - flowFilePretty: true, - - // By default, all user data is stored in the Node-RED install directory. To - // use a different location, the following property can be used - userDir: __dirname + '/', - - // Node-RED scans the `nodes` directory in the install directory to find nodes. - // The following property can be used to specify an additional directory to scan. - nodesDir: '%%nodesdir%%', - - // By default, the Node-RED UI is available at http://localhost:1880/ - // The following property can be used to specify a different root path. - // If set to false, this is disabled. - //httpAdminRoot: '/admin', - - // You can protect the user interface with a userid and password by using the following property. - // The password must be an md5 hash eg.. 5f4dcc3b5aa765d61d8327deb882cf99 ('password') - httpAdminAuth: '%%auth%%', - - // Some nodes, such as HTTP In, can be used to listen for incoming http requests. - // By default, these are served relative to '/'. The following property - // can be used to specifiy a different root path. If set to false, this is - // disabled. - //httpNodeRoot: '/nodes', - - // To password protect the node-defined HTTP endpoints, the following property - // can be used. - // The password must be an md5 hash eg.. 5f4dcc3b5aa765d61d8327deb882cf99 ('password') - //httpNodeAuth: {user:"user",pass:"5f4dcc3b5aa765d61d8327deb882cf99"}, - - // When httpAdminRoot is used to move the UI to a different root path, the - // following property can be used to identify a directory of static content - // that should be served at http://localhost:1880/. - //httpStatic: '/home/nol/node-red-dashboard/', - - // To password protect the static content, the following property can be used. - // The password must be an md5 hash eg.. 5f4dcc3b5aa765d61d8327deb882cf99 ('password') - //httpStaticAuth: {user:"user",pass:"5f4dcc3b5aa765d61d8327deb882cf99"}, - - // The following property can be used in place of 'httpAdminRoot' and 'httpNodeRoot', - // to apply the same root to both parts. - httpRoot: "'%%httpRoot%%'", - - // The following property can be used in place of 'httpAdminAuth' and 'httpNodeAuth', - // to apply the same authentication to both parts. - //httpAuth: {user:"user",pass:"5f4dcc3b5aa765d61d8327deb882cf99"}, - - // The following property can be used to disable the editor. The admin API - // is not affected by this option. To disable both the editor and the admin - // API, use either the httpRoot or httpAdminRoot properties - //disableEditor: false, - - // The following property can be used to enable HTTPS - // See http://nodejs.org/api/https.html#https_https_createserver_options_requestlistener - // for details on its contents. - // See the comment at the top of this file on how to load the `fs` module used by - // this setting. - // - //https: { - // key: fs.readFileSync('privatekey.pem'), - // cert: fs.readFileSync('certificate.pem') - //}, - - // The following property can be used to configure cross-origin resource sharing - // in the HTTP nodes. - // See https://github.com/troygoode/node-cors#configuration-options for - // details on its contents. The following is a basic permissive set of options: - //httpNodeCors: { - // origin: "*", - // methods: "GET,PUT,POST,DELETE" - //}, - - // Anything in this hash is globally available to all functions. - // It is accessed as context.global. - // eg: - // functionGlobalContext: { os:require('os') } - // can be accessed in a function block as: - // context.global.os - - valueConvert: '%%valueConvert%%', - - credentialSecret: "'%%credentialSecret%%'", - - functionGlobalContext: { - //'%%functionGlobalContext%%' - // os:require('os'), - // bonescript:require('bonescript'), - // arduino:require('duino') - } - -}; +/** + * Copyright 2013 IBM Corp. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + **/ + +// The `https` setting requires the `fs` module. Uncomment the following +// to make it available: +//var fs = require("fs"); + +module.exports = { + // the tcp port that the Node-RED web server is listening on + uiPort: '%%port%%', + uiHost: '%%bind%%', + + // By default, the Node-RED UI accepts connections on all IPv4 interfaces. + // The following property can be used to listen on a specific interface. For + // example, the following would only allow connections from the local machine. + //uiHost: "127.0.0.1", + yunkong2Instance: '%%instance%%', + yunkong2Config: '%%config%%', + + // Retry time in milliseconds for MQTT connections + mqttReconnectTime: 15000, + + // Retry time in milliseconds for Serial port connections + serialReconnectTime: 15000, + + // Retry time in milliseconds for TCP socket connections + //socketReconnectTime: 10000, + + // Timeout in milliseconds for TCP server socket connections + // defaults to no timeout + //socketTimeout: 120000, + + // Maximum number of lines in debug window before pruning + debugMaxLength: 1000, + + // The file containing the flows. If not set, it defaults to flows_.json + flowFile: 'flows.json', + + // To enabled pretty-printing of the flow within the flow file, set the following + // property to true: + flowFilePretty: true, + + // By default, all user data is stored in the Node-RED install directory. To + // use a different location, the following property can be used + userDir: __dirname + '/', + + // Node-RED scans the `nodes` directory in the install directory to find nodes. + // The following property can be used to specify an additional directory to scan. + nodesDir: '%%nodesdir%%', + + // By default, the Node-RED UI is available at http://localhost:1880/ + // The following property can be used to specify a different root path. + // If set to false, this is disabled. + httpAdminRoot: "'%%httpRoot%%'", + + // You can protect the user interface with a userid and password by using the following property. + // The password must be an md5 hash eg.. 5f4dcc3b5aa765d61d8327deb882cf99 ('password') + httpAdminAuth: '%%auth%%', + + // Some nodes, such as HTTP In, can be used to listen for incoming http requests. + // By default, these are served relative to '/'. The following property + // can be used to specifiy a different root path. If set to false, this is + // disabled. + //httpNodeRoot: '/nodes', + + // To password protect the node-defined HTTP endpoints, the following property + // can be used. + // The password must be an md5 hash eg.. 5f4dcc3b5aa765d61d8327deb882cf99 ('password') + //httpNodeAuth: {user:"user",pass:"5f4dcc3b5aa765d61d8327deb882cf99"}, + + // When httpAdminRoot is used to move the UI to a different root path, the + // following property can be used to identify a directory of static content + // that should be served at http://localhost:1880/. + //httpStatic: '/home/nol/node-red-dashboard/', + + // To password protect the static content, the following property can be used. + // The password must be an md5 hash eg.. 5f4dcc3b5aa765d61d8327deb882cf99 ('password') + //httpStaticAuth: {user:"user",pass:"5f4dcc3b5aa765d61d8327deb882cf99"}, + + // The following property can be used in place of 'httpAdminRoot' and 'httpNodeRoot', + // to apply the same root to both parts. + //httpRoot: "'%%httpRoot%%'", + + // The following property can be used in place of 'httpAdminAuth' and 'httpNodeAuth', + // to apply the same authentication to both parts. + //httpAuth: {user:"user",pass:"5f4dcc3b5aa765d61d8327deb882cf99"}, + + // The following property can be used to disable the editor. The admin API + // is not affected by this option. To disable both the editor and the admin + // API, use either the httpRoot or httpAdminRoot properties + //disableEditor: false, + + // The following property can be used to enable HTTPS + // See http://nodejs.org/api/https.html#https_https_createserver_options_requestlistener + // for details on its contents. + // See the comment at the top of this file on how to load the `fs` module used by + // this setting. + // + //https: { + // key: fs.readFileSync('privatekey.pem'), + // cert: fs.readFileSync('certificate.pem') + //}, + + // The following property can be used to configure cross-origin resource sharing + // in the HTTP nodes. + // See https://github.com/troygoode/node-cors#configuration-options for + // details on its contents. The following is a basic permissive set of options: + //httpNodeCors: { + // origin: "*", + // methods: "GET,PUT,POST,DELETE" + //}, + + // Anything in this hash is globally available to all functions. + // It is accessed as context.global. + // eg: + // functionGlobalContext: { os:require('os') } + // can be accessed in a function block as: + // context.global.os + + valueConvert: '%%valueConvert%%', + + credentialSecret: "'%%credentialSecret%%'", + + functionGlobalContext: { + //'%%functionGlobalContext%%' + // os:require('os'), + // bonescript:require('bonescript'), + // arduino:require('duino') + } + +};