115 lines
5.2 KiB
Markdown
115 lines
5.2 KiB
Markdown
|
|
# yunkong2 Mi Home Adapter
|
|
The Mi Home Adapter integrates a Mi Control Hub (Gateway) into an yunkong2 system
|
|
and enables the communication of various Xiaomi sensors, switches etc. with yunkong2.
|
|
|
|
Via yunkong2, e.g. the lighting and the speaker of the gateway are controlled.
|
|
## Requirements
|
|
* Mi Home App on Android or iOS device and free local network function
|
|
* Connected Mi Home Gateway
|
|
* Ready to use yunkong2 system
|
|
### Mi Home App installation and local network feature unlocking
|
|
#### Android
|
|
* Download, install and open [Android Mi Home App][Android App] on an Android device
|
|
* Choose `Mainland China` and set language `English`
|
|
* Setup an Account with `Sign in`
|
|
* After successfully logging in add a device via `+`
|
|
* Choose `MI Control Hub` under `Household security` and follow the instructions
|
|
* After successfully integration of the Gateway in Mi Home tip the 3 dots at the top
|
|
right of the screen and click `About`
|
|
* Tap the text `Plug*in version` number at the bottom of the screen 10 times
|
|
* There should be now 2 extra options listed until the developer mode is enabled.
|
|
[ if not try all steps again!]
|
|
* Choose the option `Wireless communication protocol`
|
|
* Then tap the first toggle switch to enable LAN functions. Note down the password.
|
|
> Password is required later in the yunkong2 installation.
|
|
* Make sure to hit the OK button to save changes.
|
|
* If you change here something, you lose your password!
|
|
|
|
Now further devices can be trained via the `+` sign.
|
|
|
|
#### iOS
|
|
* Download, install and open [iOS Mi Home App][ios App] on a iOS device
|
|
* Select the country setting `mainland China` via Profile/Settings/Country .
|
|
* Setup an Account with `Sign in`
|
|
* After successfully logging in add a device via `+`
|
|
* Choose `MI Control Hub` under `Household security` and follow the instructions
|
|
* After successfully integration of the Gateway in Mi Home tip the 3 dots at the top
|
|
right of the screen and click `About`*
|
|
* There should be now more extra options listed until the developer mode is enabled.
|
|
[ if not try all steps again!]
|
|
* Choose the option No. 4
|
|
* Then tap the first toggle switch to enable LAN functions. Note down the password.
|
|
> Password is required later in the yunkong2 installation.
|
|
* Make sure to hit the OK button to save changes.
|
|
* If you change here something, you lose your password!
|
|
|
|
Now further devices can be trained via the `+` sign.
|
|
|
|
## Router Setup
|
|
The Gateway IP address can be determined within the text after _localip_ under About/Hub
|
|
info. In the used router used, this IP should be assigned fix to the gateway.
|
|
If the operation of the learned devices via the App is no longer wanted, after learning
|
|
all devices the Internet access of the gateway can be switched off in the router.
|
|
|
|
### Supported devices
|
|
The following list does not claim to be complete:
|
|
* gateway * Xiaomi RGB Gateway
|
|
* sensor_ht * Xiaomi Temperature/Humidity
|
|
* weather.v1 * Xiaomi Temperature/Humidity/Pressure
|
|
* switch * Xiaomi Wireless Switch
|
|
* sensor_switch.aq2 * Xiaomi Aqara Wireless Switch Sensor
|
|
* sensor_switch.aq3 * Xiaomi Aqara Wireless Switch Sensor
|
|
* plug * Xiaomi Smart Plug
|
|
* 86plug * Xiaomi Smart Wall Plug
|
|
* 86sw2 * Xiaomi Wireless Dual Wall Switch
|
|
* 86sw1 * Xiaomi Wireless Single Wall Switch
|
|
* natgas * Xiaomi Mijia Honeywell Gas Alarm Detector
|
|
* smoke * Xiaomi Mijia Honeywell Fire Alarm Detector
|
|
* ctrl_ln1 * Xiaomi Aqara 86 Fire Wall Switch One Button
|
|
* ctrl_ln1.aq1 * Xiaomi Aqara Wall Switch LN
|
|
* ctrl_ln2 * Xiaomi 86 zero fire wall switch double key
|
|
* ctrl_ln2.aq1 * Xiaomi Aqara Wall Switch LN double key
|
|
* ctrl_neutral2 * Xiaomi Wired Dual Wall Switch
|
|
* ctrl_neutral1 * Xiaomi Wired Single Wall Switch
|
|
* cube * Xiaomi Cube
|
|
* sensor_cube.aqgl01 * Xiaomi Cube
|
|
* magnet * Xiaomi Door Sensor
|
|
* sensor_magnet.aq2 * Xiaomi Aqara Door Sensor
|
|
* curtain * Xiaomi Aqara Smart Curtain
|
|
* motion * Xiaomi Motion Sensor
|
|
* sensor_motion.aq2 * Xiaomi Aqara Motion Sensor
|
|
* sensor_wleak.aq1 * Xiaomi Aqara water sensor
|
|
* ctrl_ln2.aq1 * Xiaomi Aqara Wall Switch LN (Double)
|
|
* remote.b286acn01 * Xiaomi Aqara Wireless Remote Switch (Double Rocker)
|
|
* remote.b1acn01 * Xiaomi Aqara Wireless Remote Switch
|
|
* vibration * Xiaomi vibration Sensor
|
|
* wleak1 * Xiaomi Aqara Water Sensor
|
|
* lock_aq1 * Xiaomi Lock
|
|
|
|
## yunkong2 Mi Home Adapter installation
|
|
Further settings are only made via the yunkong2 Admin * interface.
|
|
Find the adapter in the `Adapter` area and install it using the `+` sign.
|
|
|
|
|
|
|
|
The following configuration window then opens:
|
|
|
|
|
|
|
|
Enter the password determined above under `Default Gateway Key` and close the window
|
|
with `save and close`.
|
|
The current adapter should then be displayed green under `Instances`:
|
|
|
|
|
|
|
|
Under `Objects` now the gateway and its learned devices are displayed:
|
|
|
|
|
|
|
|
The manual was created to the best of my knowledge and belief.
|
|
|
|
[Android App]:(https://play.google.com/store/apps/details?id=com.xiaomi.smarthome)
|
|
|
|
[iOS App]:(https://itunes.apple.com/de/app/mi*home*xiaomi*smarthome/id957323480?mt=8)
|