Currently, the material animation sets glColorMaterial(GL_AMBIENT_AND_DIFFUSE)
for all material properties. This breaks emission-only (e.g. cockpit lighting
for the p51d) or specular-only animation. ==> set glColorMaterial only where
it is really required.
Changes
=======
- correct the transparency probleme when old 3d clouds were enabled
(rendering context with an alpha channel)
- changed rain cone orientation, it can now be viewed from helicopter or chase
view (still not tower view)
- clouds are a bit more yellow/red at dawn/dusk
- weather data is now correctly propagated to the interpolator, this correct
visibility, wind, etc
- the 'metar' weather scenario now immedialty reuse the real metar data
- real metar no more overwrite custom weather scenario
This is another update for the cloud code, a lot of lines but this time I have started to add the doxygen doc.
Misc
====
- corrected a bug when RTT is not available, the current rendering context was
altered
- if RTT is not available then 3d clouds are not drawn at all
- impostors lighting is now recomputed when the sun changes position
- distant objects are no more seen in front of clouds
- blending of distant clouds is a bit better now
- litle optimization of code (uses a less cpu time)
- use layer wind speed and direction (no more hardcoded wind)
- fov is no more hardcoded
Changes
=======
- clouds (cu only) are dissipating/reforming (experimental)
- compute a turbulence factor that depends on surrounding clouds and type of
clouds (experimental)
- clouds shapes are defined in cloudlayers.xml
- type of clouds present in a layer is also defined in cloudlayers.xml
- cloud layers are generated from metar and other misc. data (in progress)
- added a rain effect around the viewer (enabled in the rendering dialog and
when the metar property says so)
- added a lightning effect (enabled in the rendering dialog) : cb clouds spawn
new lightnings
- added a dialog to select from different weather source : metar/property,
a 'fair weather' environment and a 'thunderstorm' environment.
Vivian pointed out that a redefined Ctrl-U key binding didn't work
correctly. I found out that this is, because the definition in
$FG_ROOT/keyboard.xml sets <value type="bool"> for binding[1],
and ... [better sit down first!] ... and assigning <value type="double">
in a *-set.xml file doesn't *really* set "double" as new type!
Instead, the boolean is kept, and a double sqeezed into it. In other
words: once tainted as bool, you can throw all doubles in the universe
on a property node, and all it will accept is 0 and 1. Without warning!
BTW: I changed the patch: I was overly cautious: clear_value() does already
care for ties and for setting NONE, so we just need to make that public as
clearValue(), and use that. Makes the patch a bit more verbose, though. :-/
This is a minor bug fix for sgBucketDiff().
If you crossed the bucket size boundary, the answer for dx could be wrong.
E.g.
going from 0:0, 21:7 to 0:7, 21:7 would give you dx = 7 (correct)
but going from 0:0, 21:7 to 0:3, 22:0 would give you dx = 6 (instead of 7)
Previously it differenced the center longitudes of the buckets. When you
cross a boundary, the center point of the larger bucket now lies on the edge of the smaller bucket.
The result was a dx with an integer + 1/2 bucket, which rint() was rounding to the nearest even int.
This function only seems to be used in TerraGear.
I have done a patch to eliminate the jitter of 3D-objects near the viewpoint
(for example 3D cockpit objects).
The problem is the roundoff accuracy of the float values used in the
scenegraph together with the transforms of the eyepoint relative to the
scenery center.
The solution will be to move the scenery center near the view point.
This way floats relative accuracy is enough to show a stable picture.
To get that right I have introduced a transform node for the scenegraph which
is responsible for that shift and uses double values as long as possible.
The scenery subsystem now has a list of all those transforms required to place
objects in the world and will tell all those transforms that the scenery
center has changed when the set_scenery_center() of the scenery subsystem is
called.
The problem was not solvable by SGModelPlacement and SGLocation, since not all
objects, especially the scenery, are placed using these classes.
The first approach was to have the scenery center exactly at the eyepoint.
This works well for the cockpit.
But then the ground jitters a bit below the aircraft. With our default views
you can't see that, but that F-18 has a camera view below the left engine
intake with the nose gear and the ground in its field of view, here I could
see that.
Having the scenery center constant will still have this roundoff problems, but
like it is now too, the roundoff error here is exactly the same in each
frame, so you will not notice any jitter.
The real solution is now to keep the scenery center constant as long as it is
in a ball of 30m radius around the view point. If the scenery center is
outside this ball, just put it at the view point.
As a sideeffect of now beeing able to switch the scenery center in the whole
scenegraph with one function call, I was able to remove a one half of a
problem when switching views, where the scenery center was far off for one or
two frames past switching from one view to the next. Also included is a fix
to the other half of this problem, where the view position was not yet copied
into a view when it is switched (at least under glut). This was responsible
for the 'Error: ...' messages of the cloud subsystem when views were
switched.
have done a patch to eliminate the jitter of 3D-objects near the viewpoint
(for example 3D cockpit objects).
The problem is the roundoff accuracy of the float values used in the
scenegraph together with the transforms of the eyepoint relative to the
scenery center.
The solution will be to move the scenery center near the view point.
This way floats relative accuracy is enough to show a stable picture.
To get that right I have introduced a transform node for the scenegraph which
is responsible for that shift and uses double values as long as possible.
The scenery subsystem now has a list of all those transforms required to place
objects in the world and will tell all those transforms that the scenery
center has changed when the set_scenery_center() of the scenery subsystem is
called.
The problem was not solvable by SGModelPlacement and SGLocation, since not all
objects, especially the scenery, are placed using these classes.
The first approach was to have the scenery center exactly at the eyepoint.
This works well for the cockpit.
But then the ground jitters a bit below the aircraft. With our default views
you can't see that, but that F-18 has a camera view below the left engine
intake with the nose gear and the ground in its field of view, here I could
see that.
Having the scenery center constant will still have this roundoff problems, but
like it is now too, the roundoff error here is exactly the same in each
frame, so you will not notice any jitter.
The real solution is now to keep the scenery center constant as long as it is
in a ball of 30m radius around the view point. If the scenery center is
outside this ball, just put it at the view point.
As a sideeffect of now beeing able to switch the scenery center in the whole
scenegraph with one function call, I was able to remove a one half of a
problem when switching views, where the scenery center was far off for one or
two frames past switching from one view to the next. Also included is a fix
to the other half of this problem, where the view position was not yet copied
into a view when it is switched (at least under glut). This was responsible
for the 'Error: ...' messages of the cloud subsystem when views were
switched.
Changes
=======
- corrected some strange behavior when playing with the render dialog options
- the density slider is now working : if you are fps limited and still want to see clouds in
the distance you should play with that
- added the choice for texture resolution, its more comprehensible now (before it was
wrongly allways choosing 64x64 textures)
- changed the initial texture size : you now have 64 texture of 64x64, this uses 1Mo of
texture memory (before it was 20 texture of 256x256, that took more memory and there was
not enought impostors)
- sun vector is now right so the lighting is a bit better
- removed useless sort and light computations for impostors, this should save a lot of cpu
- blending of distant cloud is more accurate now
- clouds are now positioned correctly, they don't try to escape you anymore
- no more red/white boxes around cloud
- textures are now filtered (no more big pixels)
known bugs
==========
- distant objects are seen in front of clouds
- new and updated sources for the new volumetric clouds
- 2 new textures for the clouds
- an update to the render dialog to enable/disable and change a few parameters
for the new clouds
foreach, except that the variable gets the index instead of the list
element. Should be useful, and took almost no code to implement.
Support for operator/assignment syntax: +=, -=, *=, /= and ~= now do
what you think they should.
Library support for a bind() function (see the docs Andy is still
writing), allowing runtime modifications to function lexical
environments.
that the column math goes wacky when lgalloced is allowed to be
zero.
Augment the find() function to take a starting index.
Fix strc() to use a default index of zero.
Fix parser precedence of TOK_MINUS, so that "a-b-1" means (a-b)-1 and
not a-(b-1).
Re-organisation: <diffuse>, <ambient>, <emission>, <specular> are
now groups with members <red>, <green>, <blue>, <factor>, <offset>,
and their <*-prop> forms. Additionally, there's an option <property-base>
that can be used to set a path that is prepended to all <*-prop> paths.
It defaults to an empty string. Rationale: see model-howto.html.
here is the promised material animation. It looks a bit longish, but that
wasn't avoidable -- there are simply too many parameters to consider. I tried
hard, though, to make the animation fast by only doing the necessary stuff.
It doesn't affect the frame rate here with my test model. The animation is
heavily based on Jim's "material-emission" animation.
* implementation of the "material" animation (this required to make the
texture path available) + documentation update ($FG_ROOT/Docs/)
* fix some more return values (texture animations, and select) for the
shadow problem (and some in anticipation of other problems :-)
* fix compiler warning
the cause for the disappearing shadows is, that SimGear doesn't tell plib
to call the pre-traversal-callback function on culled objects. These calls,
however, are necessary to execute the transform animation that does, for
example, translate a shadow back into the frustum! Curretnly, the callback
is only executed, and the shadow only magically pops up again, when the object
enters the frustum because the view has changed significantly.
The plib documentation does only talk about TRUE and FALSE for possible
return values from the pre-traversal-callback. But src/ssgEntity.cxx reads
like this:
int ssgEntity::preTravTests ( int *test_needed, int which )
...
int result = (*preTravCB)(this,which) ;
if ( result == 0 ) return FALSE ;
if ( result == 2 ) *test_needed = 0 ;
...
So the return value needs to be 2 to bypass the cull test for pretraversal,
and get the pretraversal in any case. I only changed the return values in
four animations: scale, rotate, translate, and range, because these are
the most likely to move an object out of the frustum. It's not necessary
for blend/alpha/texture manipulation etc. Of course, this is a bit more work
for plib, but the performance will probably not be affected, because:
* these four animations are mainly used for the aircraft model (the spin
and billboard (trees!) animations are not affected)
* the number of extra nodes to process is quite low
* a part of the time spent for the extra nodes to be processed, was before
used for workarounds that are now not necessary any more
I didn't observe a frame rate drop, at least.
code generation of constant objects to use real identity and not Nasal
equality, so (e.g.) the constants 1 (number) and "1.0" (string) do not
get turned into the same object in the generated code.
This patch adds support to the model animation system for modifying emissive
states on the fly so that it is possible to make "lights" appear to dimm.
This is an example of a configuration entry which should explain how it is used:
<animation>
<type>material-emission</type>
<object-name>Face</object-name>
<property>/controls/lighting/instruments-norm</property>
<emiss-red>1.0</emiss-red>
<emiss-green>0.8</emiss-green>
<emiss-blue>0.5</emiss-blue>
</animation>
Note the color entries are the emissive colors when the "property" value is
1.0. They are useful for tinting the light. The "property" itself must be
float or double and is clamped to values between 0 ~ 1.0 inclusively. The
"property" value is multiplied against the colors to get the actual material
properties. Thus property value 0.0 = darkest, and 1.0 = brightest.
