179 lines
5.3 KiB
Plaintext
179 lines
5.3 KiB
Plaintext
Starting the executable
|
|
=======================
|
|
|
|
Unix: runfgfs
|
|
Windows: runfgfs.bat
|
|
|
|
"runfgfs" is a script which runs the Flight Gear executable with
|
|
(hopefully) the correct $FG_ROOT directory specified.
|
|
|
|
|
|
First Flight
|
|
============
|
|
|
|
By default, the plane should be looking more or less straight down a
|
|
runway, and the mouse cursor should be a regular pointer. The
|
|
following steps will help you to get into the air:
|
|
|
|
- click the right mouse button once, so that a cross cursor
|
|
appears (now, the mouse will act as a control yoke)
|
|
|
|
- while holding down the left mouse button, push the mouse cursor up
|
|
until the engine is at full power (the throttle indicator is on the
|
|
left side of the HUD), then release the left mouse button
|
|
|
|
- when the plane is moving fast enough (say, 100 knots for the default
|
|
Navion), slowly pull the mouse cursor down (with no buttons pressed)
|
|
to raise the elevators until the plane rolls off the runway and into
|
|
the air
|
|
|
|
- while holding down the left mouse button, move the mouse cursor down
|
|
slightly to ease up on the throttle, then release the left mouse
|
|
button
|
|
|
|
- move the mouse up, down, and sideways as necessary to establish
|
|
level flight -- small movements are best, or you may lose control of
|
|
the plane
|
|
|
|
- click the right mouse button once more, so that a double-arrow
|
|
cursor appears (now, the mouse will allow you to look around)
|
|
|
|
- move the mouse around to look out of the plane at different angles
|
|
|
|
- press the left mouse button once to return the view to front and
|
|
centre
|
|
|
|
- click the right mouse button *twice*, so that the cross cursor
|
|
appears again (you're in yoke mode)
|
|
|
|
- now that you know how to operate the throttle, ailerons, and
|
|
elevators (as well as how to look around), try to circle around and
|
|
land back on the runway (best of luck)
|
|
|
|
|
|
Mouse controls
|
|
==============
|
|
|
|
It is possible to manipulate the basic flight controls and the view
|
|
using only the mouse. Clicking the right mouse button toggles the
|
|
mouse among three different modes:
|
|
|
|
1. Pointer mode (the default: mouse cursor is a pointer)
|
|
2. Yoke mode (mouse cursor is a cross)
|
|
3. Look-around mode (mouse pointer is a double arrow)
|
|
|
|
In yoke mode and look-around mode, the mouse cursor will remain
|
|
trapped in the Flight Gear window.
|
|
|
|
|
|
Yoke mode
|
|
---------
|
|
|
|
In yoke mode (mouse cursor as cross), mouse movement adjusts the main
|
|
flight controls, depending on which buttons you press.
|
|
|
|
With no button pressed:
|
|
(like a control yoke on an airplane)
|
|
- horizontal movement controls the ailerons
|
|
- vertical movement controls the elevators
|
|
|
|
With left button pressed:
|
|
- horizontal movement controls the brakes
|
|
- vertical movement controls the throttle
|
|
|
|
With middle button pressed:
|
|
- horizontal movement controls the rudder
|
|
- vertical movement controls the trim
|
|
|
|
|
|
Look-around mode
|
|
----------------
|
|
|
|
In look-around mode (mouse cursor as double arrow), mouse movement
|
|
changes the viewing direction: horizontal movement scrolls the view
|
|
horizontally, and vertical movement scrolls the view vertically in the
|
|
direction of mouse movement.
|
|
|
|
To return the view to front and center, click the left mouse button
|
|
once.
|
|
|
|
|
|
Keyboard controls
|
|
=================
|
|
|
|
It is also possible to fly using the numeric keypad. There is some
|
|
unresolved wierdness with the GLUT libraries and keyboard input, so
|
|
for now, the state of the "Num Lock" key is important.
|
|
|
|
Num Lock Active
|
|
---------------
|
|
|
|
Pg Up/Pg Dn Throttle
|
|
Left Arrow/Right Arrow Aileron
|
|
Up Arrow/Down Arrow Elevator
|
|
Ins/Enter Rudder
|
|
"5" Center aileron/elevator/rudder
|
|
Home/End Elevator Trim
|
|
|
|
Num Lock Inactive
|
|
-----------------
|
|
Shift + <Numeric Keypad Key> Change view
|
|
|
|
where key is one of:
|
|
|
|
8 = forward
|
|
7 = left/forward
|
|
4 = left
|
|
1 = left/back
|
|
2 = back
|
|
3 = right/back
|
|
6 = right
|
|
9 = right/forward
|
|
|
|
Brakes
|
|
------
|
|
Press the "b" key to toggle
|
|
|
|
Autopilot
|
|
---------
|
|
Control + A Toggle autopilot altitude lock.
|
|
Control + H Toggle autopilot heading lock.
|
|
Control + S Toggle autopilot autothrottle.
|
|
Control + T Toggle autopilot terrain follow.
|
|
|
|
Simulation
|
|
----------
|
|
|
|
ESC Quit Flight Gear.
|
|
|
|
a Increase speedup.
|
|
b Toggle brakes.
|
|
h Dim HUD.
|
|
i Revert to full HUD.
|
|
m Increase time warp.
|
|
p Toggle pause.
|
|
t Increase time warp delta.
|
|
v Toggle external view mode.
|
|
x Zoom out (narrow field of view).
|
|
z Increase visibility.
|
|
|
|
Shift + A Decrease speedup.
|
|
Shift + H Brighten HUD
|
|
Shift + I Minimize HUD
|
|
Shift + M Decrease time warp.
|
|
Shift + P Toggle 2D panel display.
|
|
Shift + T Decrease time warp delta.
|
|
Shift + W Toggle fullscreen/window mode.
|
|
Shift + X Zoom out (widen field of view).
|
|
Shift + Z Decrease visibility.
|
|
|
|
Other
|
|
-----
|
|
F2 = Reload tile cache.
|
|
F6 = Toggle autopilot target location.
|
|
F8 = Toggle fog modes (off, fastest, nicest)
|
|
F9 = Toggle textures on/off
|
|
F10 = Toggle menu
|
|
F11 = Set autopilot altitude
|
|
F12 = Set autopilot heading
|