136 lines
6.2 KiB
Markdown
136 lines
6.2 KiB
Markdown
Firstly if you use this code or are doing anything with ADS-B broadcast, I would be interested in hearing what you are up to. Get in touch on @nzkarit on twitter or adsb (AT) karit [dot] nz
|
|
|
|
# "ADS-B Out" add-on for SoftRF-Emu, Stratux, etc...
|
|
|
|
This repository contains "ADS-B Out" encoder for Tx-capable SDR hardware.
|
|
|
|
It is currently written in architecture independent Python language and can be used as an add-on for existing
|
|
open source "ADS-B In" solutions. One known good example is [Stratux](https://github.com/cyoung/stratux).
|
|
|
|
# Disclaimer
|
|
The source code is published for academic purpose only.
|
|
|
|
# Instructions
|
|
1. Execute *ADSB_Encoder.py* all the options have defaults so none are needed to generate with defaults. Running help will show you the optiosn you can change:
|
|
```
|
|
$ ./ADSB_Encoder.py
|
|
|
|
$ ./ADSB_Encoder.py -h
|
|
usage: ADSB_Encoder.py [-h] [-i ICAO] [--lat LATITUDE] [--lon LONGITUDE]
|
|
[-a ALTITUDE] [--ca CAPABILITY] [--tc TYPECODE]
|
|
[--ss SURVEILLANCESTATUS] [--nicsb NICSUPPLEMENTB]
|
|
[--time TIME] [-s SURFACE] [-o OUTPUTFILENAME]
|
|
[-r REPEATS] [--csv CSVFILE]
|
|
|
|
This tool will generate ADS-B data in a form that a hackRF can broadcast. In
|
|
addition to providing the information at the command the defaults can be
|
|
changed in the config.cfg file and the the loggin config changed in
|
|
logging.cfg.
|
|
|
|
optional arguments:
|
|
-h, --help show this help message and exit
|
|
-i ICAO, --icao ICAO The ICAO number for the plane in hex. Ensure the ICAO
|
|
is prefixed with '0x' to ensure this is parsed as a
|
|
hex number. Default: 0xABCDEF
|
|
--lat LATITUDE, --latitude LATITUDE
|
|
Latitude for the plane in decminal degrees. Default:
|
|
12.34
|
|
--lon LONGITUDE, --long LONGITUDE, --longitude LONGITUDE
|
|
Longitude for the place in decminal degrees. Default:
|
|
56.78
|
|
-a ALTITUDE, --alt ALTITUDE, --altitude ALTITUDE
|
|
Altitude in decminal feet. Default: 9876.5
|
|
--ca CAPABILITY, --capability CAPABILITY
|
|
The capability. (Think this is always 5 from ADSB
|
|
messages. More info would be appreciate). Default: 5
|
|
--tc TYPECODE, --typecode TYPECODE
|
|
The type for the ADSB messsage. See https://adsb-
|
|
decode-guide.readthedocs.io/en/latest/content/introduc
|
|
tion.html#ads-b-message-types for more information.
|
|
Default: 11
|
|
--ss SURVEILLANCESTATUS, --surveillancestatus SURVEILLANCESTATUS
|
|
The surveillance status. (Think this is always 0 from
|
|
ADSB messages. More info would be appreciate).
|
|
Default: 0
|
|
--nicsb NICSUPPLEMENTB, --nicsupplementb NICSUPPLEMENTB
|
|
The NIC supplement-B.(Think this is always 0 from ADSB
|
|
messages. More info would be appreciate). Default: 0
|
|
--time TIME The time. (Think this is always 0 from ADSB messages.
|
|
More info would be appreciate). Default: 0
|
|
-s SURFACE, --surface SURFACE
|
|
If the plane is on the ground or not. Default: False
|
|
-o OUTPUTFILENAME, --out OUTPUTFILENAME, --output OUTPUTFILENAME
|
|
The iq8s output filename. This is the file which you
|
|
will feed into the hackRF. Default: Samples_256K.iq8s
|
|
-r REPEATS, --repeats REPEATS
|
|
How many repeats of the data to perform. Default: 1
|
|
--csv CSVFILE, --csvfile CSVFILE, --in CSVFILE, --input CSVFILE
|
|
Import a CSV file with the plane data in it. Default:
|
|
|
|
```
|
|
2. Transmit the signal into air:
|
|
```
|
|
$ hackrf_transfer -t Samples_256K.iq8s -f 915000000 -s 2000000 -x 10
|
|
call hackrf_sample_rate_set(2000000 Hz/2.000 MHz)
|
|
call hackrf_baseband_filter_bandwidth_set(1750000 Hz/1.750 MHz)
|
|
call hackrf_set_freq(915000000 Hz/915.000 MHz)
|
|
Stop with Ctrl-C
|
|
3.9 MiB / 1.000 sec = 3.9 MiB/second
|
|
0.5 MiB / 1.000 sec = 0.5 MiB/second
|
|
|
|
User cancel, exiting...
|
|
Total time: 2.00039 s
|
|
hackrf_stop_tx() done
|
|
hackrf_close() done
|
|
hackrf_exit() done
|
|
fclose(fd) done
|
|
exit
|
|
$
|
|
```
|
|
* -t is the input file to transmit
|
|
* -f is the frequency in hertz. In the real world this would be 1090000000 but do not use that
|
|
* -s is the sample rate in hertz
|
|
* -x is the gain
|
|
3. Receive the Signal
|
|
```
|
|
$ sudo ./dump1090 --net --freq 915000000
|
|
...
|
|
```
|
|
|
|
|
|
# Generate CSV files
|
|
These CSV files can be used for input into the application
|
|
## generateAllICAO.py
|
|
This script will generate a CSV with all the different ICAO numbers in it.
|
|
|
|
# Import FlightRadar24 CSV files
|
|
This script will take a FR24 CSV files and convert it ready for import into ADSB_Encoder.py. It outputs a file called fr24.csv.
|
|
```
|
|
$ ./FR24csv.py --csv <exportFromFR24.csv>
|
|
$ ./ADSB_Encoder.py --csv fr24.csv
|
|
|
|
$ ./FR24csv.py --help
|
|
usage: FR24csv.py [-h] [-i ICAO] --csv CSVFILE
|
|
|
|
This script will take a FR24 CSV file and convert it into a format for
|
|
FR24csv.py
|
|
|
|
optional arguments:
|
|
-h, --help show this help message and exit
|
|
-i ICAO, --icao ICAO The ICAO number for the plane in hex. Ensure the ICAO
|
|
is prefixed with '0x' to ensure this is parsed as a
|
|
hex number. This is 24 bits long. Default: 0x75008F
|
|
--csv CSVFILE, --csvfile CSVFILE, --in CSVFILE, --input CSVFILE
|
|
The name of the FR24 CSV file
|
|
```
|
|
# References
|
|
1. "*Gr-Air-Modes*", **Nick Foster**, 2012
|
|
1. "*EXPLOITING THE AUTOMATIC DEPENDENT SURVEILLANCE BROADCAST SYSTEM VIA FALSE TARGET INJECTION*", **Domenic Magazu III**, 2012
|
|
1. "*ADS-B out by HACKRF and received over the air by rtl-sdr dongle and dump1090*", **Jiao Xianjun**, 2014
|
|
1. "*Ghost in the Air(Traffic): On insecurity of ADS-B protocol and practical attacks on ADS-B devices*", **Andrei Costin and Aurelien Francillon**, 2015
|
|
1. "*ADS-B Decoding Guide*", **Junzi Sun**, 2017
|
|
1. "*Inside Radio: An Attack and Defense Guide*", **Qing Yang & Lin Huang**, 2018
|
|
|
|
# History
|
|
This is a fork orginally from https://github.com/lyusupov/ADSB-Out in September 2017.
|