algorithm consisting of two consequent phases :
- first phase is a GLSL shader performing object culling and LOD picking ( a culling shader ).
Every culled object is represented as GL_POINT in the input osg::Geometry.
The output of the culling shader is a set of object LODs that need to be rendered.
The output is stored in texture buffer objects. No pixel is drawn to the screen
because GL_RASTERIZER_DISCARD mode is used.
- second phase draws osg::Geometry containing merged LODs using glDrawArraysIndirect()
function. Information about quantity of instances to render, its positions and other
parameters is sourced from texture buffer objects filled in the first phase.
The example uses various OpenGL 4.2 features such as texture buffer objects,
atomic counters, image units and functions defined in GL_ARB_shader_image_load_store
extension to achieve its goal and thus will not work on graphic cards with older OpenGL
versions.
The example was tested on Linux and Windows with NVidia 570 and 580 cards.
The tests on AMD cards were not conducted ( due to lack of it ).
The tests were performed using OSG revision 14088.
The main advantages of this rendering method :
- instanced rendering capable of drawing thousands of different objects with
almost no CPU intervention ( cull and draw times are close to 0 ms ).
- input objects may be sourced from any OSG graph ( for example - information about
object points may be stored in a PagedLOD graph. This way we may cover the whole
countries with trees, buildings and other objects ).
Furthermore if we create osgDB plugins that generate data on the fly, we may
generate information for every grass blade for that country.
- every object may have its own parameters and thus may be distinct from other objects
of the same type.
- relatively low memory footprint ( single object information is stored in a few
vertex attributes ).
- no GPU->CPU roundtrip typical for such methods ( method uses atomic counters
and glDrawArraysIndirect() function instead of OpenGL queries. This way
information about quantity of rendered objects never goes back to CPU.
The typical GPU->CPU roundtrip cost is about 2 ms ).
- this example also shows how to render dynamic objects ( objects that may change
its position ) with moving parts ( like car wheels or airplane propellers ) .
The obvious extension to that dynamic method would be the animated crowd rendering.
- rendered objects may be easily replaced ( there is no need to process the whole
OSG graphs, because these graphs store only positional information ).
The main disadvantages of a method :
- the maximum quantity of objects to render must be known beforehand
( because texture buffer objects holding data between phases have constant size ).
- OSG statistics are flawed ( they don't know anymore how many objects are drawn ).
- osgUtil::Intersection does not work
Example application may be used to make some performance tests, so below you
will find some extended parameter description :
--skip-dynamic - skip rendering of dynamic objects if you only want to
observe static object statistics
--skip-static - the same for static objects
--dynamic-area-size - size of the area for dynamic rendering. Default = 1000 meters
( square 1000m x 1000m ). Along with density defines
how many dynamic objects is there in the example.
--static-area-size - the same for static objects. Default = 2000 meters
( square 2000m x 2000m ).
Example application defines some parameters (density, LOD ranges, object's triangle count).
You may manipulate its values using below described modifiers:
--density-modifier - density modifier in percent. Default = 100%.
Density ( along with LOD ranges ) defines maximum
quantity of rendered objects. registerType() function
accepts maximum density ( in objects per square kilometer )
as its parameter.
--lod-modifier - defines the LOD ranges. Default = 100%.
--triangle-modifier - defines the number of triangles in finally rendered objects.
Default = 100 %.
--instances-per-cell - for static rendering the application builds OSG graph using
InstanceCell class ( this class is a modified version of Cell class
from osgforest example - it builds simple quadtree from a list
of static instances ). This parameter defines maximum number
of instances in a single osg::Group in quadtree.
If, for example, you modify it to value=100, you will see
really big cull time in OSG statistics ( because resulting
tree generated by InstanceCell will be very deep ).
Default value = 4096 .
--export-objects - write object geometries and quadtree of instances to osgt files
for later analysis.
--use-multi-draw - use glMultiDrawArraysIndirect() instead of glDrawArraysIndirect() in a
draw shader. Thanks to this we may render all ( different ) objects
using only one draw call. Requires OpenGL version 4.3 and some more
work from me, because now it does not work ( probably I implemented
it wrong, or Windows NVidia driver has errors, because it hangs
the apllication at the moment ).
This application is inspired by Daniel Rákos work : "GPU based dynamic geometry LOD" that
may be found under this address : http://rastergrid.com/blog/2010/10/gpu-based-dynamic-geometry-lod/
There are however some differences :
- Daniel Rákos uses GL queries to count objects to render, while this example
uses atomic counters ( no GPU->CPU roundtrip )
- this example does not use transform feedback buffers to store intermediate data
( it uses texture buffer objects instead ).
- I use only the vertex shader to cull objects, whereas Daniel Rákos uses vertex shader
and geometry shader ( because only geometry shader can send more than one primitive
to transform feedback buffers ).
- objects in the example are drawn using glDrawArraysIndirect() function,
instead of glDrawElementsInstanced().
Finally there are some things to consider/discuss :
- the whole algorithm exploits nice OpenGL feature that any GL buffer
may be bound as any type of buffer ( in our example a buffer is once bound
as a texture buffer object, and later is bound as GL_DRAW_INDIRECT_BUFFER ).
osg::TextureBuffer class has one handy method to do that trick ( bindBufferAs() ),
and new primitive sets use osg::TextureBuffer as input.
For now I added new primitive sets to example ( DrawArraysIndirect and
MultiDrawArraysIndirect defined in examples/osggpucull/DrawIndirectPrimitiveSet.h ),
but if Robert will accept its current implementations ( I mean - primitive
sets that have osg::TextureBuffer in constructor ), I may add it to
osg/include/PrimitiveSet header.
- I used BufferTemplate class writen and published by Aurelien in submission forum
some time ago. For some reason this class never got into osg/include, but is
really needed during creation of UBOs, TBOs, and possibly SSBOs in the future.
I added std::vector specialization to that template class.
- I needed to create similar osg::Geometries with variable number of vertices
( to create different LODs in my example ). For this reason I've written
some code allowing me to create osg::Geometries from osg::Shape descendants.
This code may be found in ShapeToGeometry.* files. Examples of use are in
osggpucull.cpp . The question is : should this code stay in example, or should
it be moved to osgUtil ?
- this remark is important for NVidia cards on Linux and Windows : if
you have "Sync to VBlank" turned ON in nvidia-settings and you want to see
real GPU times in OSG statistics window, you must set the power management
settings to "Prefer maximum performance", because when "Adaptive mode" is used,
the graphic card's clock may be slowed down by the driver during program execution
( On Linux when OpenGL application starts in adaptive mode, clock should work
as fast as possible, but after one minute of program execution, the clock slows down ).
This happens when GPU time in OSG statistics window is shorter than 3 ms.
"
git-svn-id: http://svn.openscenegraph.org/osg/OpenSceneGraph/trunk@14531 16af8721-9629-0410-8352-f15c8da7e697
lists when drawing lots of batches and noticed that my program
generated a lot of unneeded glClientActiveTexture calls. Digging
deeper I found out it came from State::disableTexCoordPointer where
the function would call glClientActiveTexture but not
glDisableClientState because the geometry didn't have texture
coordinates for that channel. This is because in our scene there are
some geometries that have move than one uv channels making
State::_texCoordArrayList grow. Then the method
State::applyDisablingOfVertexAttributes() will call
disableTexCoordPointer multiple times.
I rearrange the method a little to combat this. Now the logic has the
same ordering as disableTexCoordPointersAboveAndIncluding which
already combats this."
git-svn-id: http://svn.openscenegraph.org/osg/OpenSceneGraph/trunk@14508 16af8721-9629-0410-8352-f15c8da7e697
To enable the sync of swap buffers set the env var OSG_SYNC_SWAP_BUFFERS to ON or 1, to switch off set to OFF or 0.
One can also use the --sync command line option for application that pass on command line options to the osg::DisplaySettings::instance().
git-svn-id: http://svn.openscenegraph.org/osg/OpenSceneGraph/trunk@14456 16af8721-9629-0410-8352-f15c8da7e697
The State::AppliedProgramObjectSet wasn't ever being used actively in the current rev of the OSG so populating and clearing was no longer neccessary, allowing the code to be removed completely.
git-svn-id: http://svn.openscenegraph.org/osg/OpenSceneGraph/trunk@14377 16af8721-9629-0410-8352-f15c8da7e697
Initially I described issue in message:
http://forum.openscenegraph.org/viewtopic.php?t=13820
It solves issue with compiling texture using ico from image with mipmaps
I added enviroment variable OSG_GL_TEXTURE_STORAGE_ENABLE to control usage of glTexStorage2d. Initially it is disabled.
It used only if image have mipmaps.
Another issue is converting from internalFormat + type to sized internal format. I created sizedInternalFormats[] struct where sized internal formats are ordered from worse->best.
also this struct have commented lines. Commented formats are listed in
http://www.opengl.org/wiki/GLAPI/glTexStorage2D
but looks like not using in osg."
Note from Robert Osfield. Changed the env var control to OSG_GL_TEXTURE_STORAGE and made it's value true by default when the feature is supported by the OpenGL driver. To disable to
use of glTexStorage2D use OSG_GL_TEXTURE_STORAGE="OFF" or "DISABLE"
git-svn-id: http://svn.openscenegraph.org/osg/OpenSceneGraph/trunk@14275 16af8721-9629-0410-8352-f15c8da7e697
If Drawable::getBoundingBox would compute an invalid bounding box (if it was for example empty) it would make a bounding sphere with a infinite radius which counts as a valid sphere in osg.
Attached is a small fix."
- Added apply(Drawable) and apply(Geometry) to NodeVisitor
- Added accept(NodeVisitor) method to Drawable/Geometry
- Added traverse(NodeVisitor) to Geode which calls accept(NodeVisitor) on all Drawables
- Updated CullVisitor to use new apply(Drawable) to handle drawables. The apply(Billboard) method still manually handles the drawables since it is depends on the billboard settings. I needed to disable the traverse within billboard to prevent duplicate traversal of drawables.
- Update other osgUtil node visitors (GLObjectsVisitor, IncrementalCompileOperation, ..) to use new apply(Drawable) method.
"
To select standard OpenGL 1/2 build with full backwards and forwards comtability use:
./configure
make
OR
./configure -DOPENGL_PROFILE=GL2
To select OpenGL 3 core profile build using GL3/gl3.h header:
./configure -DOPENGL_PROFILE=GL3
To select OpenGL Arb core profile build using GL/glcorearb.h header:
./configure -DOPENGL_PROFILE=GLCORE
To select OpenGL ES 1.1 profile use:
./configure -DOPENGL_PROFILE=GLES1
To select OpenGL ES 2 profile use:
./configure -DOPENGL_PROFILE=GLES2
Using OPENGL_PROFILE will select all the appropriate features required so no other settings in cmake will need to be adjusted.
The new configuration options are stored in the include/osg/OpenGL header that deprecates the old include/osg/GL header.
osg/GL2Extensions was incorrectly defining GL_RED_SNORM and GL_RG_SNORM as part of the definitions for OpenGL v3.1. However, a quick review of the 3.1 spec indicates that these are not part of the 3.1 standard.
My attached change moves these definitions out of the #ifndef GL_VERSION_3_1 conditional block, and defines them conditionally if not already defined. This allows the DDS plugin to build for GL3.
"
To the Lua plugin added support for assigned lua functions to C++ osg::Objects via the new osg::CallbackObject mechanism. To invoke the scripts function from C++ one must get the CallbackObject and call run on it.
Renamed ScriptCallback to ScriptNodeCallback to avoid possibly confusion between osg::CallbackObject and the ScriptNodeCallback.
One solution is naturally to create a new class that would inherit the osg::ComputeBoundVisitor, and use that. I don't like that idea as the ComputeBoundVisitor does actually have what I need - it is only hidden in a protected function.
I am therefor suggesting a slight generalization of the ComputeBoundVisitor with the attached patch, which is tested.
The patch has two parts:
we add applyBBox() so that one can use that in a customized traverse-function and add a bbox to the visitor. I considered calling this function expandByBBox(), but I though applyBBox was better.
The MatrixStack is made available to the outside world. That enables a traverse-function to do whatever it wishes.
I do actually only need one of the two, as I can implement what I wish either way, but adding getMatrixStack() will make more generic expansions possible.
"
From Robert Osfield, changed the name of the new applyBBox(..) method to applyBoundingBox(..) to keep it's naming more consistent with the rest of the OSG.
