The initialisation of glu low level tessellator is done in osgUtil::Tessellator::beginTessellation()
This function is not virtual, preventing any customization of the tesselation.
In particular, there in an option in glu tesselator that force the generated primitives to be triangles and that I'd like to use (GLU_TESS_EDGE_FLAG).
"
"I've made a few changes to osgUtil::PolytopeIntersector so that it
actually uses double precision floating point numbers everywhere (as
long as OSG_USE_FLOAT_PLANE is not defined).
I needed double precision intersections in a project I am working on.
These changes fixed the problems I was having -- this is all testing I
have done.
Notice that I have changed
osgUtil::PolytopeIntersector::Intersection's members to use doubles
(osg::Vec3d, instead of osg::Vec3). I could have added #ifdef's there
too, but I think it is better to not change the types of stuff in the
public interface depending on some preprocessor definition.
The modified files are attached. A diff also follows, for those who like it."
With the following changes from Robert Osfield:
"I've just reviewed your changes and have just tweaked them a little to
streamline them. What I have done in the PolytopeIntersector header
is add:
typedef osg::Plane::Vec3_type Vec3_type;
And then use this typedef in the definition of the vertices rather
then Vec3d as you did. Next changes were to PolytopeInteresector.cpp
where to the PolytopeIntersectorUtils defintions of the Vec3_type, and
value_type which now simply read:
typedef osg::Plane::Vec3_type Vec3_type;
typedef Vec3_type::value_type value_type;
This way I was able to complete avoid any if def's and have essential
the same implementation as you achieved. Changes now checked into
svn/trunk."
retessellatePolygons was applying the winding and boundary option.
Moved the gluTessProperty calls into beginTessellation().
There's a comment typo fix, removing an unused VertexPointList
typedef, and allocates one _tobj instead of one per tesellation.
Protections were added to check that _tobj was allocated in the few
remaining places it wasn't being checked.
---
On a side note, I would like to avoid the 'new Vec3d' in
Tessellator::addVertex for each call to
gluTessVertex(tess, location, data).
The RedBook leaves it ambiguous if the location pointer must
remain valid after gluTessVertex or not.
http://www.opengl.org/sdk/docs/man/xhtml/gluTessVertex.xml
says that changing location is not safe, so being conservative, I'll
leave it as is, even though the Mesa GLU library copies the data not
the pointer, so it is currently safe."
- apply() and reset() methods made virtual to allow overriding
- added apply(StateSet&) to make more easier to gather StateAttribute
statistics in user-derived classes
"
Added COMPUTE_NEAR_FAR_USING_PRIMITIVES option that provides the original functionality where only the near plane
is computed in a fine grained way, with the far plane being computed simply from bound volumes.
CID 11828: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member distance is not initialized in this constructor nor in any functions that it calls.
Non-static class member maxDistance is not initialized in this constructor nor in any functions that it calls.
Non-static class member numIntersectionPoints is not initialized in this constructor nor in any functions that it calls.
Non-static class member primitiveIndex is not initialized in this constructor nor in any functions that it calls.
disable pragmas that turn off specific warnings for MSVC.
Unfortunately it's presence is only checked in osg/Export header,
making other Export headers disable warnings no matter what, which is
kind of incoherent.
My fix adds #include <osg/Config> to every Export header. I've also
unified checking whether to disable warnings to current osg/Export
way:
#if defined(_MSC_VER) && defined(OSG_DISABLE_MSVC_WARNINGS).
Attachment contains all changed Export files in their original locations."
- Algorithm doesn't try to merge double and single precision arrays together
- Algorithm doesn't try to merge incompatible geometries (ex: one with "vertices + texoords", and another with only vertices)
2. Better TextureAtlasBuilder
Algorithm is still sub-optimal, but it now tries to fill more blanks, using "unused space in the current line".
(Don't know if I already submitted it, but I guess not)
One day, someone should try to find a good solution to this NP-problem... For instance : http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.140.200&rep=rep1&type=pdf
"
to download the texture object to graphics card.
Calling IncrementalCompileOperation::assignForceTextureDownloadGeometry() assigns a geometry
to the job.
changed extensions from .c to .cpp and got compiling as C files as part of the osg core library.
Updated and cleaned up the rest of the OSG to use the new internal GLU.
Note from Robert Osfield, I've temporarily re-enabled the old focing of of color and depth attachment to avoid regressions on some OpenGL driver. We'll revist this once
we have a mechanism for controlling this override at runtime.
#define FORCE_COLOR_ATTACHMENT 1
#define FORCE_DEPTH_ATTACHMENT 1
of these methods in src/osgViewer/Renderer.cpp to make sure that the draw thread keeps references to all in scene graph Cameras
that are being used by the drawing threads, to keep the Camera's alive even when the main thread removes these Cameras from the scene graph.
Very simple cases of state configuration are supported (all the ones I really need):
- single per pixel not attenuated non spot light source ON/OFF
- exp2 fog ON/OFF
- diffuse texture in rgb + optional specular gloss in alpha (Texture unit 0) ON/OFF
- normal map texture (Texture unit 1 and Tangent in VertexAttribArray 6) ON/OFF
- blending and alpha testing (not in shader pipeline)
To view fixed function pipeline files and paged databases simply run >osgshadergen myfile.osg"
Because there already exists the option to convert slow path geometry to the fast path by computing an internal fast path alternative, I added a new optimizer option that automatically does this. To check the results I also made some changes to the statistics gathering and rendering.
Somewhat unrelated, but also part of the optimizer I disabled removal of CameraView nodes during RemoveRedundantNodes optimization.
As discussed on the ML, CameraViews were removed from the scenegraph. This solves that issue.
Summary:
-Geometry::areFastPathsUsed now also looks at internalOptimizedGeometry
-Added Optimize option to make all slow path geometry compute their internal fast path alternative
-Added fast geometry counter to the statistics
-Disabled removel of CameraViews in optimizer
"
"I made several modifications:
* The cause of my errors was that my OSG source directory path contains spaces. To fix this issue I wrapped all paths with quotes, as stated in doxygen documentation.
* I also received some warning messages about deprecated doxygen settings, which I fixed by updating the doxygen file, i.e. running \u2018doxygen \u2013u doxygen.cmake\u2018. By running this command deprecated doxygen options are removed, some option comments have changed and quite some options have been added (I kept their default settings unless mentioned).
* I was surprised to find that the doxygen OUTPUT_DIRECTORY was set to \u201c${OpenSceneGraph_SOURCE_DIR}/doc\u201d, which does not seem appropriate for out of source builds; I changed this to \u201c${OpenSceneGraph_BINARY_DIR}/doc\u201d. (On the other hand, maybe a cmake selectable option should be given to the user?)
* Fixed two warnings I received about unexpected end-of-list-markers in \u2018osg\AnimationPath and \u2018osgUtil\CullVisitor due to excess trailing points in comments.
* Fixed a warning in osgWidget\StyleInterface due to an #include directive (strangely) placed inside a namespace.
* Fixed a warning in osg\Camera due to the META_Object macro that confused doxygen. Adding a semi-colon fixed this.
* Removed auto_Mainpage from the INCLUDE option, because I am positive that this file does not belong there; It never generated useful documentation anyway.
* I added the OSG version number environment variable to the PROJECT_NUMBER option so that the version number is now shown on the main page of generated documentation (e.g. index.html).
* Changed option FULL_PATH_NAMES to YES, but made sure STRIP_FROM_PATH stripped the absolute path until the include dir. This fixed an issue that created mangled names for identical filenames in different directories. E.g. osg/Export and osgDB/Export are now correctly named.
* Changed option SHOW_DIRECTORIES to yes, which is a case of preference I guess.
"
with gcc (version 4.3.1) I got the following error message in
include/osgUtil/TriStripVisitor and Tessellator
error: type qualifiers ignored on function return type
The errors belong all to a INLINE function definition. Find attached my
modified version."
to optimize away duplicate state with dynamic, static and unspecified DataVarience. By default
the code now optimizes away duplicate state with either static and unspecied state, previously
it was just handling static state.
From Robert Osfield, made a range of changes to Terry's visitor integrating it into osgUtil::Optimizer and
changing the code to use a style more like the rest of the OSG.
viewport settings in stereo mode. It seems that the SceneView::cull()
method will pass the full size viewport to the left/right
cullvisitors, instead of the modified stereo viewport. I made quite a
few changes to SceneView to fix the issue. The SceneView::cullStage()
method will now receive the viewport as an argument, instead of using
the global viewport. The SceneView::cull() method will pass the
modifed viewport to cullStage when rendering in stereo.
There are 2 new private methods computeLeftEyeViewport() and
computeRightEyeViewport() that will compute the stereo viewports. I
also modified the draw() function so it applies the correct viewport
to the prerender stages. These changes are only necessary for
horizontal/vertical split stereo."
via StateSet::setNestedRenderBin(bool) whether the new RenderBin should be nested
with the existing RenderBin, or be nested with the enclosing RenderStage.
