absolute filenames for the texture images.
The attached change should fix this by at first looking at the absolute file
name to load a texture and then, if that fails, strip away any paths to try
that again with the bare file name.
The change also fixes a possible exception that could be triggered by an out
of bounds std::string access which is now avoided by using functions from
osgDB/FileUtils.
The change is based on rev 11161."
Old behaviour: "abc.d/filename_no_ext" -> "abc"
New behaviour: "abc.d/filename_no_ext" -> "abc.d/filename_no_ext"
Attached file is against rev. 11158."
- OsgMacroUtils.cmake, SETUP_LINK_LIBRARIES macro : allow linking with debug/release external libraries
- osgQt/CMakeLists.txt : fix the linking to Qt librairies + linking to debug Qt librairies if found
- examples/ qt examples : linking to debug Qt librairies if found"
Attached you will find updates of the files to hopefully solve the warnings (in VS2005 only one warning occured). In addition I fixed a tiny bug that caused a crash with one of my test files."
This change should make it possible to delete PagedLOD's independantly from the DatabasePager, and also prevent issues of
consistency of the pager when subgraphs when are cached elsewhere in the application such as in the Registry filecache.
up vector to setViewMatrixAsLookAt(..) codes in osgShadow. This will addresses previous issues that occured when look vectors
co-incided with the hard coded up vectors.
Fixes in StandardShadowMap.cpp & MinimalShadowMap.cpp were made for spotlight issues. There were cases when further located spotlights were not shadowing properly.
Small tweak in DebugShadowMap & StandardShadowMap.cpp to not limit shadow maps to texture2D (which should also allow texture2D arrays and cube maps). I simply replaced ptr to osg::Texture2D with pointer to osg::Texture. Interpretation of this member could be now changed with change of shaders in derived classes. This may be useful for guys who override LispSM or MinimalBoundsShadowMaps techniques. Could be useful for implementation of PerspectiveCascadedShadowMaps technique for example.
ConvexPolyhedron.cpp & DebugShadowMap.cpp contain debug HUD tweaks.
Change in ConvexPolyhedron.cpp overcomes the regression problem with color per primitive binding which caused that shadow volume outlines stopped to draw. I simply changed PER_PRIMITIVE to PER_PRIMITIVE_SET and it works again.
Other adition is dump method I added to DebugShadowMap which can be used in shadow debugging mode to dump current frame shadow volumes & scene to osg file. It could be then loaded into viewer and freely examined from different angles (which is difficult inside the application if shadow adopts to view and projection). "
options->setPluginStringData("captureVideoDevice", "0");
Lines added in getDevice() are:
int deviceId = atoi(name.c_str());
if(deviceId >= 0 && deviceId < (int)_listDevice.size())
return _listDevice[deviceId];
This makes it easy to use a capture device without knowing it's name. Attached is the whole file against rev 11044"
osgAnimation. It's been tested with the majority of the samples in the
COLLADA test repository and works with all of them either as well as, or
better than, the version of the plugin currently in SVN.
Known issue: vertex animation (AKA morphing) doesn't work at present,
but that's a relatively unpopular method of animating so it's not high
on my priority list."
Follow up email:
"I've been informed that the previous DAE submission didn't build on
unix, so here's the submission again with the fixes. Thanks to Gregory Potdevin and Benjamin Bozou.
Also, my apologies to Roland for not crediting his part in making DAE
animation happen, my work was indeed built on top of his work. Thanks
also to Marius Heise and of course Cedric Pinson."
Changes by Robert Osfield, fixed compile issues when compile without C* automatic conversion enabled in ref_ptr<>
and constructor initialization fixes to address some warnings under gcc.
* Change OcclusionQueryNode::getPassed to take a NodeVisitor rather than the distance from BS center to the eye point. Change where CullVisitor calls this method to use the new parameters.
* getPassed now exits early and returns true to avoid blinking / blink-in of geometry for the first frame or for out-of-range LOD children coming back into view.
* getPassed now considers the distance from the near plane to the bounding sphere (rather than eye point to bounding sphere) when determining if the viewer is "inside" the bounding sphere or not."
The fix is basically as follows:
if( GL3 )
Query indexed extension strings.
else
Query the old way.
The "else" branch is re-indented but otherwise shouldn't contain any changes."
From Robert Osfield, added #if !defined(OSG_GLES1_AVAILABLE) && !defined(OSG_GLES2_AVAILABLE) to new block to prevent it
being compiled under GLES where no glGetStringi exists.
The fix is basically as follows:
if( GL3 )
Query indexed extension strings.
else
Query the old way.
The "else" branch is re-indented but otherwise shouldn't contain any changes."
png_set_expand_gray_1_2_4_to_8() with the 1.2.9 release. This
submission fixes builds of the OSG against versions of libpng < 1.2.9
that don't have the new symbol available. This affects platforms like
Red Hat Enterprise Linux 4 which come with libpng 1.2.7."
Text and Text3D:
1. A new line should be started after a line's last hyphen or before
its last whitespace.
2. If no suitable place to break a line is found, just start new line
after the last character that fits on the line.
3. Whitespace should be removed from the beginning of the new line
(already worked in Text, but not in Text3D).
Line wrapping looks a lot better now with no more lone periods
appearing at the beginning of lines.
Also, right-justified text is more accurate now (slashes would hang
off the end of lines before). With this new code I spotted one
instance where a hyphen stuck out too far, but in general it looks
better. Centered text was not perfect before and still isn't, but I
can't see any significant increase or decrease in quality. The casual
observer would probably never notice a problem.
Also fixed a whitespace problem in Text3D. Not all whitespace was
being removed from the beginning of lines. Now it is all being
removed in the same manner as in Text."
To reproduce, on win32:
-Run osgViewer in a windowed mode, with the cursor off, as such:
osgViewer::Viewer::Windows windows;
viewer.getWindows(windows);
for(osgViewer::Viewer::Windows::iterator itr = windows.begin();
itr != windows.end();
++itr)
{
(*itr)->useCursor( false );
}
-Quickly move the cursor into the window (cursor it should be hidden)
-Resize the window by dragging the border (notice the cursor changes to "resize" cursor)
-Move the cursor back to the inside of the window (notice the cursor is not hidden anymore)
The attached SVN patch will set the cursor to a "NoCursor" during useCursor(false). This correctly stores the no cursor state, so it can be rejuvenated after a future cursor change. This patch also fixes a couple instances where a hidden cursor should show itself, like when it's on the title bar, or the window close button."
of OSG. I modified the osgDB::InputStream and OutputStream and the
PagedLOD wrapper as well. Now all seems to work fine with paged
scenes. I've tested with the puget terrain data and the osgdem
application from VPB:
# osgdem --xx 10 --yy 10 -t ps_texture_4k.tif --xx 10 --yy 10 -d
ps_height_4k.tif -l 8 -v 0.1 -o puget.osgb
As the ive plugin does, The PagedLOD wrapper now automatically add the
latest file path to PagedLODs' databasePath member, to help them find
correct child positions. I also changed the image storage strategy of
the OutputStream class, to store them inline by default. The osgt
extension should also work, in case the image files are also written
to the disk.
"
I create a compositeviewer with two views that share a context. One view is deleted. Texture::TextureObjectSet::discardAllTextureObjects is called, but this does not reset _tail. Now the texture object is again created and addToBack is called from Texture::TextureObjectSet::takeOrGenerate. In addToBack (line 612) _tail is now not 0 (although the list should be empty) and a loop is created from the texture object to itself. Then when the second view is deleted, Texture::TextureObjectSet::deleteAllTextureObjects loops forever. Setting _tail to 0 fixes it for me (see attached)."
which utilises a global recursive mutex that is dedicated to manage Observer and ObserverSet.
The new global mutex for observers avoids problems with deadlocks that were occurring previously when
an osg::Refenced object was being deleted at the same time as on osg::ObserverNodePath.
the extra capability of making it possible for Observers to assume ownership of a object that would otherwsie be deleted.
Added a thread safe ref_ptr<T> observer_ptr<T>::lock() method for robust access to an observed object. This
makes observer_ptr<> more equivilant to boosts weak_ptr.
Introduced the OSG_NOTIFY_DISABLE Cmake variable + include/osg/Config #define to control whether the OpenSceneGraph build
should disable the notification system completely. By setting OSG_NOTIFY_DISABLE to ON in CMake and then rebuilding the
the OSG you can get a slightly smaller (~1%) and more slightly efficient library which can be good for shipping applications,
but with downside of reduced ability to detect runtime problems and their causes.
- Improved identifiers generation in duplicate name handling (was limited to 1000 name collisions, which can be very short for some usages).
- Set all read/write operations use a custom log function that will redirect lib3DS log to osg::notify() (was only used for streams)
- Removed custom code (now uses osgDB::getFilePath())
- Added missing supportsOption() calls
- Cleaned a few minor things"
almost all Linux distributions. Although it is 100% compatible with ld,
by default it gives an error if a library has unresolved symbols at link
time, that is, it has set -Wl,--no-undefined by default. Debian folks
have found that libosg.so and libosgDB.so use some functions belonging
to libdl.so {dlsym,dlopen,dlclose,dlerror} without linking to it.
My changes link those two libraries to libdl.so explicitly in the same
way it is already done for libm.so and librt.so."
SET(COMPRESSION_LIBRARIES ${ZLIB_LIBRARY})
...
LINK_EXTERNAL(${LIB_NAME} ${OSGDB_PLATFORM_SPECIFIC_LIBRARIES})
to
SET(COMPRESSION_LIBRARIES ZLIB_LIBRARY)
...
LINK_EXTERNAL(${LIB_NAME} ${OSGDB_PLATFORM_SPECIFIC_LIBRARIES}
${COMPRESSION_LIBRARIES})
LINK_WITH_VARIABLES(${LIB_NAME} ${COMPRESSION_LIBRARIES})
I notice that the LINK_EXTERNAL macro won't distinguish between debug
and release dependences, which means that osgDB will use the release
version of zlib for all build configurations. Under Win32, this will
cause a manifest problem: all applications using osgDB may complain
"failed to start because msvcr80.dll was not found" or similar
messages.
This change will make it back to normal."
the type writing more explictly tied to the size type, with use of unsigned int as the default size. This approach
ensures that we get the same results under 32 and 64bit builds.
OSGDB_EXPORT macro to RegisterCompressorProxy, and modified the
findCompressor() method to look for custom compressors in libraries
such like osgdb_compressor_name.so, which was described in the wiki
page chapter 2.4."
modified files, while GroupSoLOD.h and .cpp was deleted. Please, delete
it from repository, it is not used any longer and I doubt if it is
probably not used for anything meaningful for a while. In the new code,
there is no GroupSoLOD. Please, delete it.
I am using new plugin version for about 1.5 month so I consider it
stable by myself.
List of changes:
- rewritten Inventor state stack
- shaders support
- light attenuation support
- support for reading from stream (readNode(std::istream& fin, options))
- improved grouping node handling (SoSeparator, SoGroup,...)
- fixed transformation bug when two SoShapes/Drawables with different transformations are placed bellow one grouping node
- introduced preprocessing to handle more advanced usage schemes of SoLOD and SoSwitch nodes
- unused code clean up
- improved notify messages
- animation callbacks fixes
- FindInventor.cmake improved finding routines, support for Coin3 and Coin4"
1. Rewrite the reading/writing exception handlers to work like the ive
plugin exceptions.
2. Write a header writing/checking function in ReaderWriterOSG2.cpp,
which may help decide if the stream is ascii or binary. The
readInputIterator() function will return null pointer if the input
file is nither osgb nor osgt format, which indicates that the old .osg
format could be used here, in case we've merged the two plugins
together.
3. Add a new ForceReadingImage option in the InputStream, which will
allocate an empty image object with the filename if specifed external
image file is missed. It may be useful for format converting in some
cases.
4. Add new osgParticle wrappers, as well as some modification to the
osgParticle headers, for instance, change isEnabled() to getEnabled().
5. Some fixes to the osg serialization wrappers."
Bone now inherit from MatrixTransform. It simplify a lot the update of
Bone matrix. It helps to have the bone system more generic. eg it's now
possible to have animation data with precomputed bind matrix. The other
benefit, is now the collada plugin will be able to use osgAnimation to
display skinned mesh. Michael Plating did a great work to improve this
aspect, he is working on the collada plugin and should be able to submit
a new version soon.
The RigGeometry has been refactored so now it works when you save and
reload RigGeometry because the source is not touched anymore. The
benefit with this update is that it should be now possible to use a
MorphGeometry as source for a RigGeometry.
The bad news is that the format has changed, so i have rebuild osg-data
related to osgAnimation data, updated the blender exporter to export to
the new format.
The fbx plugin could be touched about this commit, i dont compile it so
i can't give more information about it.
The bvh plugin has been updated by Wang rui so this one is fixed with
the new code of osgAnimation.
The examples has been updated to work with the new code too...
The example osg-data/example.osg should be remove, it's an old example
that does not work.
For people using blender the blender exporter up to date is here:
http://hg.plopbyte.net/osgexport2/
it will be merge to http://hg.plopbyte.net/osgexport/ as soon as the
modification will be push in the trunk.
"
> quote from http://www.opengl.org/registry/specs/ARB/wgl_pbuffer.txt
> The following attributes are supported by wglCreatePbufferARB:
>
> WGL_PBUFFER_LARGEST_ARB If this attribute is set to a
> non-zero value, the largest
> available pbuffer is allocated
> when the allocation of the pbuffer
> would otherwise fail due to
> insufficient resources. The width
> or height of the allocated pbuffer
> never exceeds <iWidth> and <iHeight>,
> respectively. Use wglQueryPbufferARB
> to retrieve the dimensions of the
> allocated pbuffer.
It notifies the user when the size is not as requested, but I could find no way for the program to detect this. I've added two lines to write the new size back into the _traits, I think this is appropriate, but I am not absolutely sure.
In PixelBufferX11 was no support, so I've added GLX_LARGEST_PBUFFER(_SGIX) support, with the same writeback to the _trais.
I have tested the GLX_LARGEST_PBUFFER version on linux and the WGL_PBUFFER_LARGEST_ARB with windows, all tested with the modified autocapture I just submitted.
"autocapture --pbuffer --window 100 100 18192 18192 cow.osg.\[0,0,-22.7\].trans"
gives me a 4096x4096 image on my windows machine,
and a 8192x8192 image on linux."
I found very useful to have a control whether osgView::setCameraManipulator does or does not reset camera to home position.
I extended method signature as follows:
void setCameraManipulator(osgGA::MatrixManipulator* manipulator, bool resetPosition = true);
keeping the current usage intact (default parameter), while enabling user to disable the position reset. That can be useful in the situation when manipulator position was already loaded, for example from a file (user specification), or defined any other way, while we do not want to be reset to home position. Other usability is usage of two manipulators in a modeling program (orbiting around the model, walking on the model) and changing between them while we want to preserve the position of a camera in the change. Games may benefit from it as well when we change from user-defined helicopter manipulator to soldier manipulator because the user escaped the helicopter. The camera will change manipulator but the position is expected to be kept in the transition (provided that user makes the state transition between the two manipulators himself).
"
From Robert Osfield, I didn't merge the change of parameter type of IntersectKdTree::intersect() as the internal maths is all done in Vec3s. Keeping Vec3 here hasn't effected the test results.
OpenSceneGraph/src/osgUtil/SceneView.cpp
introduced in svn
10915 (5 Jan 2010): "Added support for call root Camera CullCallbacks"
It causes a segfault in osgViewer based apps on our linux system (OSG_STEREO=ON OSG_STEREO_MODE=QUAD_BUFFER)
Problem does not show when OSG_STEREO=OFF.
< 976 else _cullVisitor->traverse(*_camera);
> 976 else cullVisitor->traverse(*_camera);
Looks like a typo, and removing the _ does fix the problem."
destruction of RequestQueue to remove any pointers held in DatabaseRequest attached to the scene graph, and to
prevent their subsequent use in cases where the scene graph is attached to a new DatabasePager.
to the osgDB::Registry. Added a osgDB::Registry::getObjectWrapperManager() for access of this object wrapper manager. This
change centralises the singleton management in osgDB.
Merged the osgDB::GlobalLookUpTable functionality into ObjectWrapperManger to keep down the number of singletons in use.
