osg::GraphicsContext, in order to give good integration with the
application's GUI toolkit. This works really well.
However, I need to share OpenGL texture resources with the standard
osgViewer GraphicsContext implementations, in particular the
PixelBuffers. This is essential for my application to conserve graphics
memory on low-end hardware. Currently the standard osg implementations
will not share resources with another derived osg::GraphicsContext,
other than the pre-defined osgViewer classes e.g. PixelBufferX11 is
hardcoded to only share resources with GraphicsWindowX11 and
PixelBufferX11 objects, and no other osg::GraphicsContext object.
To address this in the cleanest way I could think of, I have moved the
OpenGL handle variables for each platform into a small utility class,
e.g. GraphicsHandleX11 for unix. Then GraphicsWindowX11, PixelBufferX11
and any other derived osg::GraphicsContext class can inherit from
GraphicsHandleX11 to share OpenGL resources.
I have updated the X11, Win32 and Carbon implementations to use this.
The changes are minor. I haven't touched the Cocoa implmentation as
I'm not familiar with it at all and couldn't test it - it will work
unchanged.
Without this I had some horrible hacks in my application, this greatly
simplifies things for me. It also simplifies the osgViewer
implementations slightly. Perhaps it may help with other users'
desires to share resources with external graphics contexts, as was
discussed on the user list recently."
Notes from Robert Osfield, adapted Colin's submission to work with the new EGL related changes.
In Scene::updateSceneGraph(), change:
if (getSceneData())
{
updateVisitor.setImageRequestHandler(getImagePager());
getSceneData()->accept(updateVisitor);
}
if (getDatabasePager())
{
// synchronize changes required by the DatabasePager thread to the scene graph
getDatabasePager()->updateSceneGraph((*updateVisitor.getFrameStamp()));
}
to
if (getDatabasePager())
{
// synchronize changes required by the DatabasePager thread to the scene graph
getDatabasePager()->updateSceneGraph((*updateVisitor.getFrameStamp()));
}
if (getSceneData())
{
updateVisitor.setImageRequestHandler(getImagePager());
getSceneData()->accept(updateVisitor);
}
That is, just swap the positions of two 'if () {...}' segments.
While working on a paged terrain, I need to collect every newly allocated PagedLODs and make them temporarily unrenderable in the next frame, which are all done in a update callback. But I found that these PagedLODs will always be shown before collecting them, because of the unsuitable sequence in Scene::updateSceneGraph(). DatabasePager is synchronized AFTER the user updating traversal, that is, user cannot IMMEDIATELY find out changes made by DatabasePager.
"
For example, when running FlightGear, I want the window to always have no title, so it opens full-screen without using the --full-screen option, which would prevent other windows from moving above the osg window.
I am attaching a patch I made to fix this problem."
The modification consists only in including osgGA::GUIEventAdapter::DOUBLECLICK in the list of "pointerEvent" events.
Test done to reproduce the problem and check the fix: in any osg application or example with an HandleInput function, break on events with a double-click event type. Without the changes, the event's buttonMask does not contain the double-clicked button. With the changes, it does.
Only simple tests (running some examples and playing with the mouse) were done to check that the changes do not break anything, since double-click is not used thoroughly in OSG.
Modification done against current SVN Trunk version (r10753).
As this is a fix, I do not wish to keep my copyright on this submission and assign it over to the project lead.
"
I've needed to run a recorded simulation offscreen and save it to a sequence of images, and the ScreenCaptureHandler seemed to be the simplest way to do that, and with this change it's possible.
Another change: I've also added the ability to specify continuous capture of all frames, or a certain number of frames. ScreenCaptureHandler now has a setFramesToCapture(int) method. The argument will be interpreted as:
0 : don't capture
<0 : capture continuously
>0 : capture that number of frames then stop
I also added startCapture() and stopCapture() methods so that user code can start capturing (either continuously or the given number of frames) at a given point in their program. setFramesToCapture() won't start capturing, you have to call startCapture() afterwards. The handler also now has another key to toggle continuous capture (defaults to 'C').
Note that continuous capture will of course only work if the CaptureOperation writes to different files (for example, a WriteToFile with SEQUENTIAL_NUMBER mode) or does something different each time... Otherwise it will just overwrite of course. :-)
I've also taken the chance to refactor the addCallbackToViewer() method a bit too, since finding the right camera is needed in two places now.
I've tested all cases (I think). If you want to try, in osgviewer.cpp and replace the line
// add the screen capture handler
viewer.addEventHandler(new osgViewer::ScreenCaptureHandler);
with
// add the screen capture handler
osgViewer::ScreenCaptureHandler* captureHandler = new
osgViewer::ScreenCaptureHandler(
new osgViewer::ScreenCaptureHandler::WriteToFile(
"screenshot", "jpg",
osgViewer::ScreenCaptureHandler::WriteToFile::SEQUENTIAL_NUMBER),
-1);
viewer.addEventHandler(captureHandler);
captureHandler->startCapture();
And vary the "-1" (put 0, 10, 50) and then use the 'c' and 'C' keys and see how it reacts.
"
Moved the handling of DisplaySettings into Traits constructor.
Added support for s/getGLContextVersion(), s/getGLContextFlags() and s/getGLContextProfileMask() to osg::DisplaySettings.
Added command line and env var support for setting the GLContextVersion, GLContextFlags and GLContextProfileMask to osg::DisplaySettings.
GraphicsWindowCocoa-implementation, which enhances multithreaded
stability, it ensures that modifications to the size of an openglcontext
is done only from one thread.
"
Therefore I have changed all the occurances of atof by asciiToFloat or
asciiToDouble.
I believe that it is safe to do so at least for all the plugins.
Included here are also asciiToFloat conversion of environment variables. One
might argue that these should be locale dependent. But IMO these should be
set and interpreted by osg independent of the current locale.
"
proper functioning when running the osgViewer run-loop in a secondary
thread (e.g. when embedding GraphicsWindowCocoa-windows in a full blown
cocoa application).
OS X is picky when you want to change the user-interface from another
thread than the main thread, not all UI stuff is thread-safe. So now
window closes and showing / hiding the menu bar is done in the main
thread via Cocoa's performSelectorOnMainThread-mechanism.
These changes don't affect the normal osgViewer usage pattern."
First Submission email from Gustav:
"This submission adds a --cache option to osgconv and osgviewer that enables setObjectCacheHint(osgDB::Options::CACHE_ALL); It greatly reduces memory usage when a .osg file has lots of external references with ProxyNode:s that points to the same file.
Options are also added to the osg plugin. The code was already mostly implemented but there was no way to change the options.
includeExternalReferences
writeExternalReferenceFiles
A counter is added to keep track if an external file has already been written down to avoid writing the same file over and over again. If it has already been written once then it is not written again.
The counter is added to the Output class in osgDB.
"
Second Submission email from Gustav:
"This is a continuation to my previous submission.
I noticed that the same problem that I fixed in ProxyNode.cpp for the osg plugin (external files being written over and over again) also existed in the ive plugin. I attached a submission where the ive plugin remembers which external files that have already been written and do not write them again."
Changes to the above done by Robert Osfield,
changed command line parameter to --enable-object-cache
changed set/get methods in osgDB::Output and ive/DataOutputStream.cpp to be s/getExternalFileWritten(const std::string&)
cleaned up set up of osgDB::Options.
of these methods in src/osgViewer/Renderer.cpp to make sure that the draw thread keeps references to all in scene graph Cameras
that are being used by the drawing threads, to keep the Camera's alive even when the main thread removes these Cameras from the scene graph.
implementation of GraoicsWindowCocoa:
Enhancements/Bugfixes:
+ now it's possible to integrate osgViewer better into existing
cocoa-applications:
* create one or more NSOpenGLView(s) and add these to your window(s)
* create one or more NSWindows
* disable the integrated event-polling of osgViewer, and let the work be
done by Cocoa / NSApplicationRun. You'll have to run the osgViewer's
runloop in a separate thread
+ missing menu-event-handling implemented
+ added NSAutoReleasePools where necessary, this fixes some memory-leaks
+ fixed some crashes and thread-issues"
Original email from Frederic at start of thread:
"he patch attached, made from r10068, fix two things, in other of importance :
- the selected cursor is never shown ( second change in file ). Only the left arrow is always displayed.
- remove the arbitrary ( in my sense ) limitation that the user cannot choose a cursor with the same shape that one used when resizing the window. This limitation doesn't exist for X11, and we have a diverging behaviour there ( first change in file ). Flightgear use the LeftRightCursor in look around mode."
Follow up email from Frederic (with changes that finally made it into this check in:
"I've just tested Mark's suggestion and it works perfectly, even when the
cursor goes to the border then come back inside the window.
But his patch doesn't seem to be based on the last revision of the
files, or at least not on the trunk, and there are more changes than
expected in them, including some loss from the previous patches.
The patch attached is based on r10068 of
src/osgViewer/GraphicsWindowWin32.cpp and r10067 of
include/osgViewer/api/Win32/GraphicsWindowWin32"
So, might be a bit fiddly to try and prevent frame update in all situations that SwapBuffers retuns false.
I wondered if we could address this issue by only reporting the error if GetLastError is also non zero. Works for me!
The value returned by GetLastError is zero when SwapBuffers is called for a minimized or off screen window, so we could just add a check for this.
Just say the word, and I'll post my modified GraphicsWindowWin32.cpp to the submissions list. ;-)
Cheers.
Chris.
e.g.
//------------- OSG- 2..8 ----------
void GraphicsWindowWin32::swapBuffersImplementation()
{
if (!_realized) return;
if (!::SwapBuffers(_hdc))
{
reportErrorForScreen("GraphicsWindowWin32::swapBuffersImplementation() - Unable to swap display buffers", _traits->screenNum, ::GetLastError());
}
}
//------------- Modification to remove redundant warnings ----------
void GraphicsWindowWin32::swapBuffersImplementation()
{
if (!_realized) return;
if (!::SwapBuffers(_hdc) && ::GetLastError() != 0)
{
reportErrorForScreen("GraphicsWindowWin32::swapBuffersImplementation() - Unable to swap display buffers", _traits->screenNum, ::GetLastError());
}
}
"
http://www.mail-archive.com/osg-users@lists.openscenegraph.org/msg23734.html
The change is source compatible with current osg code and will not affect current users, it simply adds an additional parameter to the GraphicsWindowWin32::WindowData struct constructor and defaults to the current behavior.
Attached are the files "include/osgViewer/api/Win32/GraphicsWindowWin32" and "src/osgViewer/GraphicsWindowWin32.cpp" with my changes, based on svn revision 10045. In addition, I have provided an svn patch file with the same changes for your convenience.
I have discussed the matter with my supervisor, and agreed that my company makes no copyright claim over this extremely trivial change (or to put it another way, we assign copyright to the open scene graph community.)"
The osgViewer::CompositeViewer had partial support for Producer Camera
config files, but it was not working completely. Here is the completed
implementation. File: src/osgViewer/CompositeViewer.cpp.
"
linked with system libraries using LINK_INTERNAL instead of
LINK_EXTERNAL. This caused it to try to link with libXrandrd instead of
libXrandr, which failed. Attached is the fixed CMakeLists.txt."
Also, there was also a small bug in osgDB's CMakeLists.txt that was causing an error when I tested with CMake 2.4.4.
IF(${OSG_DEFAULT_IMAGE_PLUGIN_FOR_OSX} STREQUAL "quicktime")
was changed to
IF(OSG_DEFAULT_IMAGE_PLUGIN_FOR_OSX STREQUAL "quicktime")
"
some stuff out into DarwinUtils.h/.mm so both implementations can share
some of the code. There's even a bugfix for GraphicsWindowCarbon, which
fixes some issues with multiple windows on different screens."
"There is error in WoW shader, you can see it by this simple example:
osgviewer cessna.osg --wowvx-42 --clear-color 0,0,0
Clear color may be choosed any with at least one component equals to 0
or 1. In my case I see weird blinking between normal image and image
with depth map at right side on the screen."
Because there already exists the option to convert slow path geometry to the fast path by computing an internal fast path alternative, I added a new optimizer option that automatically does this. To check the results I also made some changes to the statistics gathering and rendering.
Somewhat unrelated, but also part of the optimizer I disabled removal of CameraView nodes during RemoveRedundantNodes optimization.
As discussed on the ML, CameraViews were removed from the scenegraph. This solves that issue.
Summary:
-Geometry::areFastPathsUsed now also looks at internalOptimizedGeometry
-Added Optimize option to make all slow path geometry compute their internal fast path alternative
-Added fast geometry counter to the statistics
-Disabled removel of CameraViews in optimizer
"
- The text and dark background rectangles are now correctly placed, and
slightly resized here and there.
- All counters (vertices, etc) now use a fixed formatting with 0 digits
precision, to prevent the text from being shown in scientific notation
when the number get large (e.g. 6.34344e+6). I tested with a scene
containing roughly 4 million vertices, to make sure its stats would
display correctly.
I also made slight changes to osgcompositeviewer (attached) to aid in
testing the stats display, specifically displaying of camera and view
names."
It's a minimal change, it just calls an already existing protected method. It was trivial to subclass the handler to do it in our code, but pushing the change into OSG makes sense as it's generally useful to have it in the handler itself.
I also noticed that the handle() method was overridden from osgGA::GUIEventHandler but wasn't marked virtual. It wasn't intended that subclasses not be able to override it in turn, so I've added the keyword.""
GraphicsWindowCarbon::requestWarpPointer() places the mouse pointer in a (global?) display coordination, but it must be in a local window coordination. This problem is critical because the mouse cursor can go off a window especially when you place the window on the secondary screen.
Attached is the file to fix this problem.
I tested this modified file with the following situations (on FlightGear) and all works fine.
- two windows on two screens (each has one window).
- two windows on two screens (secondary screen has all windows).
- two windows on two screens (primary screen has all windows).
In all scenarios, warp requests (by right-click the mouse) successfully moves the mouse pointer to the center of the main window,
and it is what it's supposed to be in the flightgear."
consider these initial cpack support scripts. It is hidden behind a
BUILD_PACKAGES option so won't affect the normal user. The submission
1) set the COMPONENT attribute on all cmake install commands.
COMPONENT names are according to
http://www.openscenegraph.org/projects/osg/wiki/Community/Packaging
2) provide cmake script and a template for creating CPack
configuration files. It will generate target for creating packages
with everything that gets "installed" (make package on unx, project
PACKAGE in MSVC) plus targets for generating one package per COMPONENT
(i.e. libopenscenegraph-core etc.).
I have temporariliy uploaded some examples to
http://www.openscenegraph.org/projects/osg/wiki/Community/People/MattiasHelsing
If this submission makes it into svn we can develop it to generate
rpms, installers for windows and mac (I know at least J-S don't like
these but there may be others who do ;) and even DEBs (not sure if we
can make them "ubuntu-ready" but they eventually may - at least we
could put a deb on the website)"
Before:
1. if the camera is not a slave camera
1.1 set the eventState's graphics context to the current context.
2. if the current master view is not the view which has the focus
2.1 set the current master view to be the view which has the focus
2.2 use the new master view's eventState instead of the old one
Now as you can see from this sequence, the graphics context is set on the eventState before switching to the view which has focus (and thus using another eventState). So the new eventState, in the case we need to switch views, will contain an old graphics context, not the correct one.
Just inversing these steps fixes the problem:
1. if the current master view is not the view which has the focus
1.1 set the current master view to be the view which has the focus
1.2 use the new master view's eventState instead of the old one
2. if the camera is not a slave camera
2.1 set the eventState's graphics context to the current context.
Now, the eventState will refer to the correct graphics context in both cases.
Attached is a fixed CompositeViewer.cpp (based on today's SVN) which does this. Note that some other things are done in the 1. and 2. cases, but they have no influence on each other so they can just be swapped without problems.
"
set to off. But could be activated/decativated via CMake as well as system
environment variable. I also modified src\osgViewer\CMakeLists.txt to turn
off this workaround by default as suggested."
parts of their scene graphs. Within these common part some nodes have
event handlers which use the action adapter argument to the event
handler to determinate which view received the event.
Here is the problem, osgViewer::CompositeViewer::eventTraversal sets
the action adapter field in the EventVisitor always to the last view
which received an event, instead of using the view which actually
received the event, so determination of the correct view does not work.
I looked at the code a bit, and moved the code for setting the action
adapter to a IMO better place"
facilitate the subclassing of Image providing interactive behaviours so as
used in the vnc interactive VncImage class.
osgViewer::InteractiveImageHandler provides an event handler that convertes osgGA
mouse and keyboard events into the coordinate frame of an image based on ray intersection with geometry in
the associated subgraph.
Changed the ordering of events processing in Viewer and CompositeViewer to allow
scene graph event handlers to take precidence over viewer event handlers and camera manipulators
The graph is displayed "under" (behind) the normal bar chart you get when you press 's' twice. It doesn't hide the normal stats, you can still read them without any trouble, and that way, it doesn't take any more screen space. It starts from the left, and will scroll left when there is enough data to fill the screen width. The graph lines have the same colors we're used to (except I made the event color a bit bluer, so it's not exactly the same as the update color). A screen shot is attached.
The lines get a bit confused when they're all overlapping at the bottom of the graph, but I think that's the least of our concerns (if they're all at the bottom of the graph - except FPS of course - then great!).
The only thing I'm not very keen about is that to make things simple, I clamp the values to a given maximum. Right now, the maximums I have set are:
* Frame rate: 100 fps (people have 60, 75, 85Hz refresh rates, so there's no one right value, but I think 100 is OK)
* Stats: 0.016 seconds (what you need to get 60Hz minimum)
This could be changed so that the scale of the graph changes according to the maximum value in the last screenful of the graph instead of clamping values. We would then need to display the scale for each value on the side of the graph, because if the scale changes, you need to know what it is at this moment.
I tried to make things easy to change, so for example if you don't like that the graph is in the same space as the normal stats bars, it's easy to move it anywhere else, and make it have other dimensions. The maximums and colors are also easy to change.
The impact on performance should be minimal, since it's one vertex per graph line that's added per frame, and vertices are removed when they scroll off the screen, so you'll never have more than say 1280 * (3 + ncameras) vertices on the screen at one time. No polygons, I used line strips. The scrolling is done with a MatrixTransform."
This code will add two extra statistics options:
-Camera scene statistics, stats for the scene after culling (updated at 10 Hz)
-View scene statistics, stats for the complete scene (updated at 5 Hz)
Each camera and each view will expand the statistics to the right.
I also added the requests and objects to compile of the databasepager to the databasepager statistics.""
> Using QOSGWidget - QWidget + osgViewer creating the graphics context.
>
> Windows Error #2000: [Screen #0] GraphicsWindowWin32::setWindow() - Unable
> to create OpenGL rendering context. Reason: The pixel format is invalid.
>
>
>
> And then the following fate error pops up:
>
>
>
> The instruction at "0x014c7ef1" referenced memory at "0x000000a4", The
> memory could not be "read".
>
> Click on Ok to terminate the program
>
> Click on CANCEL to debug the program
>
>
set.
The optimization is based on the observation that matrix matrix multiplication
with a dense matrix 4x4 is 4^3 Operations whereas multiplication with a
transform, or scale matrix is only 4^2 operations. Which is a gain of a
*FACTOR*4* for these special cases.
The change implements these special cases, provides a unit test for these
implementation and converts uses of the expensiver dense matrix matrix
routine with the specialized versions.
Depending on the transform nodes in the scenegraph this change gives a
noticable improovement.
For example the osgforest code using the MatrixTransform is about 20% slower
than the same codepath using the PositionAttitudeTransform instead of the
MatrixTransform with this patch applied.
If I remember right, the sse type optimizations did *not* provide a factor 4
improovement. Also these changes are totally independent of any cpu or
instruction set architecture. So I would prefer to have this current kind of
change instead of some hand coded and cpu dependent assembly stuff. If we
need that hand tuned stuff, these can go on top of this changes which must
provide than hand optimized additional variants for the specialized versions
to give a even better result in the end.
An other change included here is a change to rotation matrix from quaterion
code. There is a sqrt call which couold be optimized away. Since we divide in
effect by sqrt(length)*sqrt(length) which is just length ...
"
New attribute DatabasePager::_expiryFrames sets number of frames a PagedLOD child is kept in memory. The attribute is set with DatabasePager::setExpiryFrames method or OSG_EXPIRY_FRAMES environmental variable.
New attribute PagedLOD::PerRangeData::_
frameNumber contains frame number of last cull traversal.
Children of PagedLOD are expired when time _AND_ number of frames since last cull traversal exceed OSG_EXPIRY_DELAY _AND_ OSG_EXPIRY_FRAMES respectively. By default OSG_EXPIRY_FRAMES = 1 which means that nodes from last cull/rendering
traversal will not be expired even if last cull time exceeds OSG_EXPIRY_DELAY. Setting OSG_EXPIRY_FRAMES = 0 revokes previous behaviour of PagedLOD.
Setting OSG_EXPIRY_FRAMES > 0 fixes problems of children reloading in lazy rendering applications. Required behaviour is achieved by manipulating OSG_EXPIRY_DELAY and OSG_EXPIRY_FRAMES together.
Two interface changes are made:
DatabasePager::updateSceneGraph(double currentFrameTime) is replaced by DatabasePager::updateSceneGraph(const osg::FrameStamp &frameStamp). The previous method is in #if 0 clause in the header file. Robert, decide if You want to include it.
PagedLOD::removeExpiredChildren(double expiryTime, NodeList &removedChildren) is deprecated (warning is printed), when subclassing use PagedLOD::removeExpiredChildren(double expiryTime, int expiryFrame, NodeList &removedChildren) instead. "
viewer.addEventHandler(new osgViewer::ScreenCaptureHandler(
new osgViewer::WriteToFileCaptureOperation("filename", "jpg")));
and the filename will be what you want. The WriteToFileCaptureOperation will add the context ID and the file number (if in SEQUENTIAL_NUMBER mode) to the file name.
(The attached also clarifies some notify messages, and corrects the comment when adding the handler in osgviewer.cpp)
I also remembered, the current architecture could allow a different CaptureOperation for each context, but currently the API only allows setting one CaptureOperation for all contexts. This could be improved if need be.
"
calling wglMakeCurrent twice.
This bug has been reported to NVidia, confirmed and fixed by NVidia but awaits verifiaction and release if a driver which fixes this bug.
osgViewer::GraphicsWindow::setCursor() the new cursor type is recorded
but not applied until windows sends another WM_SETCURSOR message. This
delays the application of the cursor to the next mouse event.
The attached file fixes this by setting the new cursor with a call to
::SetCursor() immediately.
"
multi-threaded paging, where the Pager manages threads of reading local
and http files via seperate threads. This makes it possible to smoothly
browse large databases where parts of the data are locally cached while
others are on a remote server. Previously with this type of dataset
the pager would stall all paging while http requests were being served,
even when parts of the models are still loadable virtue of being in the
local cache.
Also as part of the refactoring the DatabaseRequest are now stored in the
ProxyNode/PagedLOD nodes to facilitate quite updating in the cull traversal,
with the new code avoiding mutex locks and searches. Previous on big
databases the overhead involved in make database requests could accumulate
to a point where it'd cause the cull traversal to break frame. The overhead
now is negligable.
Finally OSG_FILE_CACHE support has been moved from the curl plugin into
the DatabasePager. Eventually this functionality will be moved out into
osgDB for more general usage.
avoid threading issues associated with compile running in a parallel with
update/cull on the first frame.
Also added automatic recompile when a new SceneData is applied to a View.
get an excess Tab key report when switching back to an OSG
application (usually FlightGear :-). Although KDE has consumed
the Tab, it's sometimes still in the XKeymapEvent's key_vector,
and followed by a Tab KeyRelease event.
Avoid this artifact by
- asking for a "fresh" keymap (via XQueryKeymap()), rather than
using the unreliable(?) XKeymapEvent's key_vector, and by
- flushing all key events on focus-in (to avoid the KeyRelease)
After Super-press, Tab-press, Super-release, Tab-release (note
the wrong release order!) I still get an extra Tab event. But
this is not surprising and not exactly wrong either. Also it's
hard to avoid, as we can't see what happened to the keyboard
before we regained focus.
Files changed:
src/osgViewer/GraphicsWindowX11.cpp
include/osgViewer/api/X11/GraphicsWindowX11"
It's implemented in the same way that 3D Spherical Display and Panoramic Spherical Display.
You can test it running:
osgviewer --wowvx-20 cow.osg
osgviewer --wowvx-42 cow.osg
depending on the size of your Philips WOWvx display (20" or 42")
Other arguments you can use to control the 3D effect are:
--wow-content <value>
This value defines the kind of content that can be:
0: No depth
1: Signage
2: Movie
3: CGI
4: Still
--wow-factor <value>
Percentage of the display recommended depth value. Default 64, Range [0-255]
--wow-offset <value>
Amount of range behind the screen. Default 128, Range [0-255]
0: Range is shifted in the direction of the viewer.
128: Range is equally divided in front and behind the screen.
255: Range is shifted away from the viewer.
"
hyper keys defined already, but these modifiers were missing in
GUIEventAdapter::ModKeyMask, and the EventQueue ingored them as well.
The attached diff/archive adds the missing parts for Super/Hyper
modifier key support.
I'm aware that this might not be supported on all systems/keyboards
out of the box, but decided to submit it anyway because:
- developers are aware of differences between input devices
(Some mice have scroll wheels, others don't. Some have five or
more buttons, some have only one. Some keyboards don't have
numpads, some have AltGr, some don't etc.)
- even if someone relies on Hyper/Super in distributed software,
this is easy to fix and doesn't create lock-in conditions
- while the names Hyper/Super may only be common on X11, they are
just symbol names and not OS-specific
- even though some systems might not offer these additional modifiers
by default, it's likely that all of them have at least 8 modifier
levels internally, so it should only be a matter of OS configuration
to make them work
- having super/hyper available is useful to offer a user ways
to define local key definitions that are safe from collisions with
predefined "official" key assignments"
unconditionally sets the X11 error handler routine, replacing anything
that was previously set. This is a bit unfriendly, as the X11 error
handler is a global attribute which the application, or the GUI toolkit
being used, may well have set itself.
So I have modified X11WindowingSystemInterface to only replace the error
handler if it is the default i.e. if the application has not set it."
key, but it didn't pick up the initial state. So, if NumLock was on for
the OS at startup (LED on), it was still off for OSG. And the first
keypress turned the LED off, and NumLock on for OSG. The attached fix
picks up the state on every FocusIn, just like it was done in the last
commits for CapsLock. The difference is, that the NumLock mask isn't
standardized (e.g. 0x10 for Linux, and 0x80 for AIX), so we have to do
a reverse lookup (::rescanModifierMapping()).
Note that I could not reproduce the problem on my system, but someone
else confirmed it twice on his, and the patch fixed it for him.
Changed files:
./include/osgViewer/api/X11/GraphicsWindowX11
./src/osgViewer/GraphicsWindowX11.cpp
"
It sets osgGA's keymask when restoring keys on FocusIn, according
to the state values of XKeyEvent and XCrossingEvent. (These are
the only source for X11's current capslock state that avoids
pulling in the XKB extension.)
"
The problem can be reproduced by simply changing the osgpick example to
use a CompositeViewer with a single view initialized using
setUpViewAcrossAllScreens(). I have attached a modified osgpick.cpp so
you can test it out quickly (please don't check this file in though :-)
) The eventState is then incorrect and picking does not work. The only
changes are in CompositeViewer.cpp (eventTraversal() method), and fix
the problem for me.
"
The win32 pbuffer implementation returned an error unless both the
WGL_ARB_pbuffer and the WGL_ARB_render_texture functions were present.
This was too restrictive, as a pbuffer can usefully be created without
render-to-texture, e.g. for use with glReadPixels. The osg 1.2/Producer
pbuffers worked without RTT, and osgUtil::RenderStage has all the code to
handle both RTT and non-RTT pbuffers, doing a read and copy in the
latter case.
With these changes I have successfully tested the osgprerender example
on a graphics card which supports RTT, and one which doesn't. Plus
tested in my own application.
In order to aid diagnostics I have also added more function status
return checks, and associated error messages. I have included the win32
error text in all error messages output. And there were some errors
with multi-threaded handling of "bind to texture" and a temporary window
context which I have corrected.
These is one (pre-existing) problem with multi-threaded use of pbuffers
in osgViewer & osgprerender, which I have not been able to fix. A win32
device context (HDC) can only be destroyed from the thread that created
it. The pbuffers for pre-render cameras are created in
osgUtil::RenderStage::runCameraSetUp, from the draw thread. But
closeImplementation is normally invoked from the destructor in the main
application thread. With the additional error messages I have added,
osgprerender will now output a couple of warnings from
osgViewer::PixelBufferWin32::closeImplementation() at exit, after
running multi-threaded on windows. I think that is a good thing, to
highlight the problem. I looked into fixing it in osgViewer::Renderer &
osgUtil::RenderStage, but it was too involved for me. My own
application requirements are only single-threaded.
Unrelated fix - an uninitialised variable in
osg::GraphicsThread::FlushDeletedGLObjectsOperation().
"
remain in pressed state after revealing, even if they are no
longer pressed on the keyboard. This can have bad effects,
especially if the stuck keys are modifier keys. One has to
press and release the stuck keys again to reset the wrong state.
The fix keeps track of all key presses and releases. On FocusOut
and UnmapNotify it releases all keys that are in pressed state,
and on KeymapNotify (following a FocusIn), it sets the currently
pressed keys again. To avoid confusion in the OSG-using application
normal keys are always reported released /before/ and pressed
/after/ modifier keys.
As current key states are returned as char[32] keymap by
XQueryKeymap and XKeymapEvent, this format is also used to
recognize modifier keys and for maintaining the current
internal key state. Functions to set/clear/query bits in
such a keymap are added.
The patch was extensively tested with osgkeyboard and
FlightGear under KDE and fvwm2. It was not tested on a
Xinerama setup or with multiple windows, but as _eventDisplay
is used throughout, there should be no problems. The patch also
makes the following changes:
- removes old and obsolete handling of modifier keys in ::adaptKey().
This wasn't only unused, but also wrong (and for that reason commented
out in revision 7066). The modifier states are actually handled
in ./src/osgGA/EventQueue.cpp (EventQueue::keyPress/keyRelease).
- fixes some spelling"
pbuffer functions or exactly ask for the extensions we need to call the
apropriate glx extension functions for and around pbuffers extensions.
The glx 1.3 version of this functios are prefered. If this is not pressent we
are looking for the glx extensions and check for them.
Prevously we just used some mix of the glx 1.3 functions or the extension
functions without making sure that this extension is present.
"
carbon-implementation of GraphicsWindow. Now you can use an AGLDrawable
in conjunction with osgViewer/osgCompositeViewer."
Changes from Robert Osfield, changed std::cout to osg::notify(osg::INFO)
setScreenRefreshRate for systems support Xrandr. The include CMakeFile
makes this optional, and turns it OFF by default, in which case any
person trying to use these functions under Linux will be instructed to
build osgViewer w/ Xrandr support.
"
window. This breaks rendering in for example MFC SDI applications and in
MFC MDI applications if user resizes the window so that client area has
zero height. Current safeguard for minimized window:
LRESULT GraphicsWindowWin32::handleNativeWindowingEvent( HWND hwnd, UINT
uMsg, WPARAM wParam, LPARAM lParam )
...
/////////////////
case WM_MOVE :
case WM_SIZE :
/////////////////
...
if (clientRect.bottom==0 && clientRect.right==0)
...
does not cover this situation. In these situations clientRect.bottom = 0
and clientRect.right > 0.
Quick fix to this is relax condition:
if (clientRect.bottom==0 || clientRect.right==0)
Modified file is attached.
Tested with osgviewerMFC from 2.2.0 release (Windows XP sp2)
Before fix:
- execute from command line osgviewerMFC.exe cow.osg.
- the cow is rendered nicely.
- resize window to zero height by dragging from bottom border upwards.
- resize window back to original height
- just blue screen, no cow
After fix:
- execute from command line osgviewerMFC.exe cow.osg.
- the cow is rendered nicely.
- resize window to zero height by dragging from bottom border upwards.
- resize window back to original height
- the cow is where it is supposed to be.
"
"This is a fix for the issue reported by Anders a week ago (see \u201c[osg-users] BUG?: mouse coordinate changes after window move\u201d discussion thread on Sept. 20). The issue was that the initial implementation added a few months back was not converting the window coordinates to client-area coordinates resulting in a slight offset each time a decorated window was moved (caused by the window border). This was also causing windows to move out of their assigned screen."
and
"Attached is a fix for the taskbar repaint issue that occurs when a graphics window is toggled from full-screen mode to windowed mode (as identified by Gert van Maren a couple of weeks ago).
Also included is a fix derived from the \u201cEvents from the past\u201d discussion thread that took place on July 11."
stereo format to work. It's a good thing I tested these on a TV
before submitting them since I did indeed have a bug. One thing I
did not test was to see how this would work in windowed mode. Does
the interlaced stereo code have support for 'absolute' positions?
For example a given pixel on the screen is always shown in a given
eye no matter where the graphics context is placed?
"
updatevisitor in osgViewer::Viewer.
The bug prevented DOF animations because osgSim::DOFTransform checks
the traversal number before doing any updates."
to the view to be done during syncronous updateTraversal().
This feature can be used for doing things like merging subgraphs that have been loaded
in a background thread.
multiple GraphicsWindows, this singleton is accessable via GUIEventEvent::getAccumulatedEventState().
Added use of this new singleton in GraphicsWindow* implementations.
Added WindowSizeHandler to osgkeyboard to help with debugging of event state
between windows.
Created a new GraphicsThread subclass from OperationThread which allows the
GraphicsContext specific calls to be moved out of the base OperationThread class.
Updated the rest of the OSG to respect these changes.
Added and cleaned up DeleteHandler calls in osgViewer to help avoid crashes on exit.
Changed DatabasePager across to dynamically checcking osg::getCompileContext(..)
Updated wrappers.
The current code takes the mouse cursor position and adds it to the
window (left,top) position, and sends the mouse cursor there. But this
doesn't take into account the window decoration.
The new code converts the given (x,y) coordinates from the client area
coordinate system to the screen instead using ClientToScreen. I think
this is the natural windows way to do it.
Tested on XP with osgviewer
"
Note from Robet Osfield, made a few changes to layout to make it more consistent
with the rest of the OSG and used #if 0 instead if (0) blocks.
