I found that some of the items that had been paged in were being expired on the first frame that they were not visible (as the cache was full). This resulted in excessive paging every time the view was moved. With the following changes I could only allow children to be expired if they had not been used for e.g. 30 seconds or 60 frames."
10.6), which will forward all multi-touch events from a trackpad to the
corresponding osgGA-event-structures.
The support is switched off per default, but you can enable multi-touch
support via a new flag for GraphicsWindowCocoa::WindowData or directly
via the GraphicsWindowCocoa-class.
After switching multi-touch-support on, all mouse-events from the
trackpad get ignored, otherwise you'll have multiple events for the same
pointer which is very confusing (as the trackpad reports absolute
movement, and as a mouse relative movement).
I think this is not a problem, as multi-touch-input is a completely
different beast as a mouse, so you'll have to code your own
event-handlers anyway.
While coding this stuff, I asked myself if we should refactor
GUIEventAdapter/EventQueue and assign a specific event-type for
touch-input instead of using PUSH/DRAG/RELEASE. This will make it
clearer how to use the code, but will break the mouse-emulation for the
first touch-point and with that all existing manipulators. What do you
think? I am happy to code the proposed changes.
Additionally I created a small (and ugly) example osgmultitouch which
makes use of the osgGA::MultiTouchTrackballManipulator, shows all
touch-points on a HUD and demonstrates how to get the touchpoints from
an osgGA::GUIEventAdapter.
There's even a small example video here: http://vimeo.com/31611842"
to ensure the correct methods on constraints and callbaks are called for each Command. Also fixed the handling of
Constraints when applied to composite Draggers.
parameter in osg::Image. To support this Image::setData(..) now has a new optional rowLength parameter which
defaults to 0, which provides the original behaviour, Image::setRowLength(int) and int Image::getRowLength() are also provided.
With the introduction of RowLength support in osg::Image it is now possible to create a sub image where
the t size of the image are smaller than the row length, useful for when you have a large image on the CPU
and which to use a small portion of it on the GPU. However, when these sub images are created the data
within the image is no longer contiguous so data access can no longer assume that all the data is in
one block. The new method Image::isDataContiguous() enables the user to check whether the data is contiguous,
and if not one can either access the data row by row using Image::data(column,row,image) accessor, or use the
new Image::DataIterator for stepping through each block on memory assocatied with the image.
To support the possibility of non contiguous osg::Image usage of image objects has had to be updated to
check DataContiguous and handle the case or use access via the DataIerator or by row by row. To achieve
this a relatively large number of files has had to be modified, in particular the texture classes and
image plugins that doing writing.
functionality when using Terrain::setVerticalScale. This was caused by
the following call sequence resulting in a lockup:
void Terrain::setVerticalScale(float scale)
CALLS dirtyRegisteredTiles();
void Terrain::dirtyRegisteredTiles(int dirtyMask)
SETS LOCK OpenThreads::ScopedLock<OpenThreads::Mutex> lock(_mutex);
and CALLS (on every tile) setDirtyMask(dirtyMask);
void TerrainTile::setDirtyMask(int dirtyMask)
CALLS _terrain->updateTerrainTileOnNextFrame(this);
void Terrain::updateTerrainTileOnNextFrame(TerrainTile* terrainTile)
SETS LOCK OpenThreads::ScopedLock<OpenThreads::Mutex> lock(_mutex);
******* PROBLEM - since lock has already been set! ********
The suggested fix submitted changes from using Mutex to ReentrantMutex.
"
You can now set a "intersection mask" and it will be used when looking for intersections.
So you can now easily "hide" some objects from manipulators."
I don’t have access to an OSX or Linux dev machine to make the changes required to the quick time plugin. This plugin will just default to returning 0."
Added support into .vnc plugin for passing in the keywords "swap", "RGB", "RGBA", "BGR", "BGRA" as OptionString values to allow .p3d presentations to control
whether the pixelformat should be swapped or set to a specific format.
Motivation ;
When using PagedLODs, you don't always know the real size of loaded children,
If it occurs that they are out of predefined bounds, picking on the parts that are out of bound will fail
They also can be culled out too soon.
The problem often occurs with long object (roads).
I've modified LOD and ProxyNode to include this option."
and later email:
"Attached the UNION_OF_BOUNDING_SPHERE_AND_USER_DEFINED version
There are impacts on some serializers (dae, osgWrapper).
I haven't modified deprecated osg, since it's deprecated"
So with the 3.0 api change we propose the following change:
- put OSG_EXPORT on the QueryGeometry class so that we get access to the getNumPixels method.
- Create a function called getQueryGeometry that returns a casted _queryGeode->getDrawable(). Or a function called getQueryGeode that returns _queryGeode."
Line 251:
int getKeyEventWindowedResolutionDown() const { return _keyEventWindowedResolutionUp; }
Should be replaced with:
int getKeyEventWindowedResolutionDown() const { return _keyEventWindowedResolutionDown; }"
Added COMPUTE_NEAR_FAR_USING_PRIMITIVES option that provides the original functionality where only the near plane
is computed in a fine grained way, with the far plane being computed simply from bound volumes.
src/osgAnimation/Skeleton.cpp:25:87: warning: addition of default argument on redeclaration makes this constructor a copy constructor [-Wdefault-arg-special-member]
Skeleton::UpdateSkeleton::UpdateSkeleton(const UpdateSkeleton& us, const osg::CopyOp& copyop= osg::CopyOp::SHALLOW_COPY) : osg::Object(us, copyop), osg::NodeCallback(us, copyop)
/src/OpenThreads/pthreads/PThread.cpp:1024:15: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (cpunum<0) return -1;
src/osgDB/ExternalFileWriter.cpp:221:122: warning: expression result unused [-Wunused-value]
_objects.insert(ObjectsSet::value_type(&obj, ObjectData(absoluteDestinationPath, relativeDestinationPath, written))).first;
src/osgManipulator/Dragger.cpp:175:18: warning: using the result of an assignment as a condition without parentheses [-Wparentheses]
if (*itr = constraint) return;
src/osgManipulator/Dragger.cpp:187:18: warning: using the result of an assignment as a condition without parentheses [-Wparentheses]
if (*itr = constraint)
OpenSceneGraph/src/osgGA/NodeTrackerManipulator.cpp:32:1: warning: base class ?class osg::Object? should be explicitly initialized in the copy constructor
OpenSceneGraph/src/osgGA/TerrainManipulator.cpp:31:1: warning: base class ?class osg::Object? should be explicitly initialized in the copy constructor
OpenSceneGraph/include/osgSim/ShapeAttribute:99:9: warning: base class ?class std::vector<osgSim::ShapeAttribute>? should be explicitly initialized in the copy constructor
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::gi?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::byte_before_the_zipfile?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::num_file?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::pos_in_central_dir?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::current_file_ok?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::central_pos?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::size_central_dir?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::offset_central_dir?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::cur_file_info?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::cur_file_info_internal?
OpenSceneGraph/src/osgPlugins/zip/unzip.cpp:3102:14: warning: missing initializer for member ?unz_s::pfile_in_zip_read?
OpenSceneGraph/src/osgViewer/CompositeViewer.cpp:30:1: warning: base class ?class osg::Object? should be explicitly initialized in the copy constructor
OpenSceneGraph/src/osgViewer/View.cpp:159:1: warning: base class ?class osg::Object? should be explicitly initialized in the copy constructor
OpenSceneGraph/src/osgViewer/Viewer.cpp:196:1: warning: base class ?class osg::Object? should be explicitly initialized in the copy constructor
OpenSceneGraph/src/osgViewer/Viewer.cpp:196:1: warning: base class ?class osgViewer::ViewerBase? should be explicitly initialized in the copy constructor
OpenSceneGraph/include/osgManipulator/Dragger:47:9: warning: base class ?class osg::Object? should be explicitly initialized in the copy constructor
with a osg::DefaultUserDataContainer subclassed from this. The user object access methods have now all
been moved from osg::Object into the UserDataContainer class, except for the set/getUserData() methods
that are left in osg::Object for backwards compatibility, and the description list access methods have
been moved back into osg::Node.
main UserObject access methods are now all def
Refactored original UserData and Descriptions strings to be managed alongside the new user object suppport within
a single osg::Object::UserDataContainer.
Here is a quick list of the modified files:
Archive - getDirectoryContents() no longer pure virtual
Archive.cpp - default getDirectoryContents() implementation
unzip.cpp - modified to fix a bug where the same file will not load twice in a row
ZipArchive.h / ZipArchive.cpp - extends osgDB::Archive and provides support for random access loading within a .zip file
ReaderWriterZip.cpp - modified to use the ZipArchive class"
CID 11666: Uninitialized pointer field (UNINIT_CTOR)
Non-static class member _glMultiTexCoord1dv is not initialized in this constructor nor in any functions that it calls.
Non-static class member _glVertexAttrib1dv is not initialized in this constructor nor in any functions that it calls.
UIView, respecting the sizes via GraphicsContext::Traits.
This helps users, who want to integrate osg into an existing ios-app
with multiple UIViews. Additinally a view-controller gets only created
if needed, set IGNORE_ORIENTATION via the WindowData-struct.
"
- renamed osgQt::GraphWidget to osgQt::GLWidget
as it better fits to Qt naming (osgQt::GLWidget is derived from QGLWidget
while recent GraphWidget... it is unclear, maybe QGraphicsView,
QGraphicsScene,....)
- added the code to properly manage ON_DEMAND rendering scheme
(involves osgQt::setViewer() and internal HeartBeat class)
- added forward key events functionality. It allows to not eat the key events
by GLWidget, but it forwards them to Qt processing as well.
- destroying GLWidget before GraphicsWindowQt and vice versa does not crash
the application
- it is possible to request particular QGLFormat in GLWidget constructor
- added QtWindowingSystem class
- multithread OSG rendering improvements/fixes
--
From Robert Osfield, added back in getGraphWidget() method for backwards compatibility.
"generic" property mechanism for osg::Object.
The main problem I have found is that InputStream and OutputStream
only takes the stream when you call start method, and in that case it
attaches to the stream buffer some stuff, useful for files but not for
runtime/gui usage. I have added a simple setInputIterator and
setOutputIterator to the classes so now you can easily serialize
values without version and other stuff.
Writing matrix:
osgDB::OutputStream os(0);
std::stringstream sstream;
os.setOutputIterator(new AsciiOutputIterator(&sstream));
os << matrix;
std::string value = sstream.str();
Reading matrix:
osgDB::InputStream is(0);
std::stringstream sstream(value);
is.setInputIterator(new AsciiInputIterator(&sstream));
osg::Matrixf mat2;
is >> mat2;
From Robert Osfield, added doxygen comments to clarify the role of the methods.
CID 11815: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _cosMaxElevation is not initialized in this constructor nor in any functions that it calls.
Non-static class member _cosMaxFadeElevation is not initialized in this constructor nor in any functions that it calls.
Non-static class member _cosMinElevation is not initialized in this constructor nor in any functions that it calls.
Non-static class member _cosMinFadeElevation is not initialized in this constructor nor in any functions that it calls.
CID 11828: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member distance is not initialized in this constructor nor in any functions that it calls.
Non-static class member maxDistance is not initialized in this constructor nor in any functions that it calls.
Non-static class member numIntersectionPoints is not initialized in this constructor nor in any functions that it calls.
Non-static class member primitiveIndex is not initialized in this constructor nor in any functions that it calls.
CID 11836: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _fullscreen is not initialized in this constructor nor in any functions that it calls.
CID 11843: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _inexp is not initialized in this constructor nor in any functions that it calls.
Non-static class member _outexp is not initialized in this constructor nor in any functions that it calls.
CID 11842: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _inexp is not initialized in this constructor nor in any functions that it calls.
Non-static class member _outexp is not initialized in this constructor nor in any functions that it calls.
WindowManager.cpp
CID 11841: Uninitialized pointer field (UNINIT_CTOR)
Non-static class member _lastEvent is not initialized in this constructor nor in any functions that it calls.
Non-static class member _lastPush is not initialized in this constructor nor in any functions that it calls.
Non-static class member _view is not initialized in this constructor nor in any functions that it calls.
Frame.cpp
CID 11840: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _flags is not initialized in this constructor nor in any functions that it calls.
Window.cpp
CID 11839: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _index is not initialized in this constructor nor in any functions that it calls.
CID 10392: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _maxIndex is not initialized in this constructor nor in any functions that it calls.
Non-static class member _minIndex is not initialized in this constructor nor in any functions that it calls.
CID 10454: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _maxIndex is not initialized in this constructor nor in any functions that it calls.
Non-static class member _minIndex is not initialized in this constructor nor in any functions that it calls.
CID 10505: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _maxIndex is not initialized in this constructor nor in any functions that it calls.
Non-static class member _minIndex is not initialized in this constructor nor in any functions that it calls.
CID 10919: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _maxIndex is not initialized in this constructor nor in any functions that it calls.
Non-static class member _minIndex is not initialized in this constructor nor in any functions that it calls.
CID 10920: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _maxIndex is not initialized in this constructor nor in any functions that it calls.
Non-static class member _minIndex is not initialized in this constructor nor in any functions that it calls.
CID 11844: Uninitialized scalar field (UNINIT_CTOR)
Non-static class member _defaultValue is not initialized in this constructor nor in any functions that it calls.
Index: ../include/osgDB/Serializer
implement the recently introduced setSyncToVBlank-method.
Additionally I added a ToggleSyncToVBlank-eventhandler to osgViewer. I
used it to test the code, perhaps you'll find it useful and include it
in the distribution."
/** Get the file name which represents the archived file.*/
virtual std::string getArchiveFileName() const = 0;
/** return type of file. */
virtual FileType getFileType(const std::string& filename) const = 0;
/** return the contents of a directory.
* returns an empty array on any error.*/
virtual DirectoryContents getDirectoryContents(const std::string& dirName) const = 0;
Added implementations of these new methods into src/osgPlugins/osga/OSGA_Archive.h src/osgPlugins/osga/OSGA_Archive.cpp
CID 11447: Unchecked dynamic_cast (FORWARD_NULL)
Dynamic cast to pointer "dynamic_cast <struct osg::NodeCallback *>(nc->clone(this))" can return null.
Assigning null: "first" = "dynamic_cast <struct osg::NodeCallback *>(nc->clone(this))".
The clone() implementation is written using macro's so that it always returns the type of Object
being cloned so it's normally safe to assume that a dynamic_cast<> will always return a valid pointer as long
as the new T that involves creates a valid object. However, if the class being cloned doesn't correctly
implement the clone() method then their potential for the dynamic_cast to fail and will return a NULL and will
result in a memory leak of the object of paraent class that the clone would have defaulted to.
I've tightened up the CopyOp.cpp code to check the return type and added better handling of the clone in the
osg::clone() methods so thay don't have any potential mememory leaks and report warnings to OSG_WARN when
problems are encountered. It may be more apporpriate to throw an exception so will need to ponder this
issue further.
The pvr format which can be used as a wrapper for different compressed and uncompressed formats supports this compression algorithm. The original pvr compression uses the pvrtc format. The handling of pvrtc is already implemented in the pvr plugin. PVR provides wrapper functionality for some formats, e.g. etc or even dxt/dds.
Our target system (gles2) is able to use the etc compression format. With minor changes in the submitted files, there is no need to write a separate plugin. However the original pvr texture compression formats are not supported on our target, which is the reason for this extension.
The changes mainly consist in the definition on new enum values in the classes and headers of ReaderWriterPVR,Image and Texture. I also found some locations where the handling of the original pvr textures was not implemented. These are also part of this submission."
I also fixed the vsync implementation introduced with rev.11357 that was crashing with the Windows Error #170. So I removed your temporary /* */ around the vsync condition..."
2nd - Script to use a 3rd party directory with basic libraries: libjpeg,libpng,libtiff,giflib,freetype,curl,gdal.
3rd - Change in the GLES library loading for Android. That should make GLES2 work properly.
4rth- Included two defines RGB8_OES and RGBA8_OES as a substitute in GLES for RGB8 and RGBA8
5th - OpenGL and GLSL version identification changed to recognize GLES versions properly
"
enum DeviceOrientation{
PORTRAIT_ORIENTATION = 1<<0,
PORTRAIT_UPSIDEDOWN_ORIENTATION = 1<<1,
LANDSCAPE_LEFT_ORIENTATION = 1<<2,
LANDSCAPE_RIGHT_ORIENTATION = 1<<3,
ALL_ORIENTATIONS = PORTRAIT_ORIENTATION | PORTRAIT_UPSIDEDOWN_ORIENTATION | LANDSCAPE_LEFT_ORIENTATION | LANDSCAPE_RIGHT_ORIENTATION
};
typedef unsigned int DeviceOrientationFlags;
The main motivation for this is to easily allow the user to specifiy that the device is in a horizontal orientation rather then having to rotate the view matrix. All flags have been tested individually as well as in combinations. The default is ALL_ORIENTATIONS to keep the exiting functionality for anyone who hasn't specified WindowData for their context traits.
"
external applications can determine if an archive extension is valid.
The second change is a bug fix in Registry::read(const ReadFunctor&)
where if you pass in valid options they get wiped out after the archive
is loaded but before being passed along to the plugin."
that the windows did not act on repaint request (WM_PAINT, EXPOSE,...)
Detailed explanation:
- I implemented requestRedraw using the push approach (not using
GraphicsWindow::_requestRedraw flag that I was considering) as there may be
multiple viewers reading the flag and fighting to reset it after the paint
request, while some viewers may not spot the request to redraw
- I made windows call GraphicsWindow::requestRedraw when they receive
appropriate message (WM_PAINT, EXPOSE, RESIZE,...)
- There were issues on Linux that windows did not want to close using x
button. Resolved by moving the test for DeleteWindow event from
swapBuffersImplementation() to GraphicsWindowX11::checkEvents(). The difficulty
was that DeleteWindow event is not coming using _eventDisplay, but through
_display.
- The last difficulty was that it is necessary to call
ViewerBase::checkWindowStatus() to set _done to true when all windows are
closed. This did not happened recently in ON_DEMAND run scheme. I put the call
to checkWindowStatus() to eventTraversal.
"
Fixes to race in DatabasePager where a parent PagedLOD
of newly loaded subgraph has been expired.
Clean up of visitor naming to make it clearer what role it has.
One can override this value via the sampleDensityWhenMoving="value" property in the volume tag, i.e.
<volume sampleDensityWhenMoving="0.01">CardiacCT</volume>
To switch the feature off set the value to 0, i.e.
<volume sampleDensityWhenMoving="0">CardiacCT</volume>
new CullVisitor::Identifier to indentifier cull traversals,
this enables the code to properly detect movement when
osgViewer::Renderer uses double buffering of SceneView.
disable pragmas that turn off specific warnings for MSVC.
Unfortunately it's presence is only checked in osg/Export header,
making other Export headers disable warnings no matter what, which is
kind of incoherent.
My fix adds #include <osg/Config> to every Export header. I've also
unified checking whether to disable warnings to current osg/Export
way:
#if defined(_MSC_VER) && defined(OSG_DISABLE_MSVC_WARNINGS).
Attachment contains all changed Export files in their original locations."
"- In order to build against GLES1 we execute:
$ mkdir build_android_gles1
$ cd build_android_gles1
$ cmake .. -DOSG_BUILD_PLATFORM_ANDROID=ON -DDYNAMIC_OPENTHREADS=OFF
-DDYNAMIC_OPENSCENEGRAPH=OFF -DANDROID_NDK=<path_to_android_ndk>/
-DOSG_GLES1_AVAILABLE=ON -DOSG_GL1_AVAILABLE=OFF
-DOSG_GL2_AVAILABLE=OFF -DOSG_GL_DISPLAYLISTS_AVAILABLE=OFF -DJ=2
-DOSG_CPP_EXCEPTIONS_AVAILABLE=OFF
$ make
If all is correct you will have and static OSG inside:
build_android_gles1/bin/ndk/local/armeabi.
- GLES2 is not tested/proved, but I think it could be possible build
it with the correct cmake flags.
- The flag -DJ=2 is used to pass to the ndk-build the number of
processors to speed up the building.
- make install is not yet supported."
/** Convenience method for setting up multiple slave cameras that depth partition the specified camera.*/
bool setUpDepthPartitionForCamera(osg::Camera* cameraToPartition, DepthPartitionSettings* dps=0);
/** Convenience method for setting up multiple slave cameras that depth partition each of the view's active cameras.*/
bool setUpDepthPartition(DepthPartitionSettings* dsp=0);
and another problem is:
example osgkeyboard is not work (keys not highlight) if user have 2 keyboard layout native and english and current user layout is native
I try to explain my changes
we need something that is identify key without modifier keys and layout -> this is UnmodifedKey
I think osg must have its own UnmodifiedKeys table. Code must be run same on different platforms. This can de guaranteed by UnmodifiedKeys table.
Mikhail Izmestev helped me. He implemented VirtualKey changes in GraphicsWindowX11"
to protect against accessing while writing which was segfaulting in VPB
specifically in void ThreadPool::run(osg::Operation* op)
in the waiting loop
while (_operationQueue->getNumOperationsInQueue() >= _maxNumberOfOperationsInQueue)
"
For the following code:
#define MYMACRO(NAME) myOutputStream << #NAME;
MYMACRO(Group)
you would expect that "Group" would be output. However, as there are many overloaded operator<< functions, none of which take a const char* argument, the function that's actually called is operator<<(bool). Hence what actually gets output is "TRUE".
An actual example of this is in serializers\osgAnimation\Animation.cpp, WRITE_CHANNEL_FUNC2.
So the simple solution to this is to add operator<<(const char*), attached.
"
The DatabasePager now passes the Terrain pointer into the ReaderWriter's via osgDB::Options object,
rather than pushing a NodePath containing the Terrain onto NodeVisitor. This
change means that the DatabasePager nolonger needs to observer the whole NodePath and
will be lighter and quicker for it.
The change also means that ReadFileCallback can now run custom NodeVisitor's on the scene graph without
having to worry about TerrainTile's constructing scene graphs prior to the Terrain being assigned.
Also changed is the NodeVisitor::DatabaseRequestHandler which now requires a NodePath to the node that you wish
to add to rather than just the pointer to the node you wish to add to. This is more robust when handling scenes
with multiple parental paths, whereas previously errors could have occurred due to the default of picking the first
available parental path. This change means that subclasses of DatabasePager will need to be updated to use this new
function entry point.
http://forum.openscenegraph.org/viewtopic.php?t=7285
This file adds the same string API wrapper to the State object for other older apps that
track Uniforms by string. The original comment about performance is preserved."
are big enough to handle the primitives used in the geometry.
Added usage of verifyArray into osgfilecache so that it reports any problems on reading files in paged database.
