algorithm consisting of two consequent phases :
- first phase is a GLSL shader performing object culling and LOD picking ( a culling shader ).
Every culled object is represented as GL_POINT in the input osg::Geometry.
The output of the culling shader is a set of object LODs that need to be rendered.
The output is stored in texture buffer objects. No pixel is drawn to the screen
because GL_RASTERIZER_DISCARD mode is used.
- second phase draws osg::Geometry containing merged LODs using glDrawArraysIndirect()
function. Information about quantity of instances to render, its positions and other
parameters is sourced from texture buffer objects filled in the first phase.
The example uses various OpenGL 4.2 features such as texture buffer objects,
atomic counters, image units and functions defined in GL_ARB_shader_image_load_store
extension to achieve its goal and thus will not work on graphic cards with older OpenGL
versions.
The example was tested on Linux and Windows with NVidia 570 and 580 cards.
The tests on AMD cards were not conducted ( due to lack of it ).
The tests were performed using OSG revision 14088.
The main advantages of this rendering method :
- instanced rendering capable of drawing thousands of different objects with
almost no CPU intervention ( cull and draw times are close to 0 ms ).
- input objects may be sourced from any OSG graph ( for example - information about
object points may be stored in a PagedLOD graph. This way we may cover the whole
countries with trees, buildings and other objects ).
Furthermore if we create osgDB plugins that generate data on the fly, we may
generate information for every grass blade for that country.
- every object may have its own parameters and thus may be distinct from other objects
of the same type.
- relatively low memory footprint ( single object information is stored in a few
vertex attributes ).
- no GPU->CPU roundtrip typical for such methods ( method uses atomic counters
and glDrawArraysIndirect() function instead of OpenGL queries. This way
information about quantity of rendered objects never goes back to CPU.
The typical GPU->CPU roundtrip cost is about 2 ms ).
- this example also shows how to render dynamic objects ( objects that may change
its position ) with moving parts ( like car wheels or airplane propellers ) .
The obvious extension to that dynamic method would be the animated crowd rendering.
- rendered objects may be easily replaced ( there is no need to process the whole
OSG graphs, because these graphs store only positional information ).
The main disadvantages of a method :
- the maximum quantity of objects to render must be known beforehand
( because texture buffer objects holding data between phases have constant size ).
- OSG statistics are flawed ( they don't know anymore how many objects are drawn ).
- osgUtil::Intersection does not work
Example application may be used to make some performance tests, so below you
will find some extended parameter description :
--skip-dynamic - skip rendering of dynamic objects if you only want to
observe static object statistics
--skip-static - the same for static objects
--dynamic-area-size - size of the area for dynamic rendering. Default = 1000 meters
( square 1000m x 1000m ). Along with density defines
how many dynamic objects is there in the example.
--static-area-size - the same for static objects. Default = 2000 meters
( square 2000m x 2000m ).
Example application defines some parameters (density, LOD ranges, object's triangle count).
You may manipulate its values using below described modifiers:
--density-modifier - density modifier in percent. Default = 100%.
Density ( along with LOD ranges ) defines maximum
quantity of rendered objects. registerType() function
accepts maximum density ( in objects per square kilometer )
as its parameter.
--lod-modifier - defines the LOD ranges. Default = 100%.
--triangle-modifier - defines the number of triangles in finally rendered objects.
Default = 100 %.
--instances-per-cell - for static rendering the application builds OSG graph using
InstanceCell class ( this class is a modified version of Cell class
from osgforest example - it builds simple quadtree from a list
of static instances ). This parameter defines maximum number
of instances in a single osg::Group in quadtree.
If, for example, you modify it to value=100, you will see
really big cull time in OSG statistics ( because resulting
tree generated by InstanceCell will be very deep ).
Default value = 4096 .
--export-objects - write object geometries and quadtree of instances to osgt files
for later analysis.
--use-multi-draw - use glMultiDrawArraysIndirect() instead of glDrawArraysIndirect() in a
draw shader. Thanks to this we may render all ( different ) objects
using only one draw call. Requires OpenGL version 4.3 and some more
work from me, because now it does not work ( probably I implemented
it wrong, or Windows NVidia driver has errors, because it hangs
the apllication at the moment ).
This application is inspired by Daniel Rákos work : "GPU based dynamic geometry LOD" that
may be found under this address : http://rastergrid.com/blog/2010/10/gpu-based-dynamic-geometry-lod/
There are however some differences :
- Daniel Rákos uses GL queries to count objects to render, while this example
uses atomic counters ( no GPU->CPU roundtrip )
- this example does not use transform feedback buffers to store intermediate data
( it uses texture buffer objects instead ).
- I use only the vertex shader to cull objects, whereas Daniel Rákos uses vertex shader
and geometry shader ( because only geometry shader can send more than one primitive
to transform feedback buffers ).
- objects in the example are drawn using glDrawArraysIndirect() function,
instead of glDrawElementsInstanced().
Finally there are some things to consider/discuss :
- the whole algorithm exploits nice OpenGL feature that any GL buffer
may be bound as any type of buffer ( in our example a buffer is once bound
as a texture buffer object, and later is bound as GL_DRAW_INDIRECT_BUFFER ).
osg::TextureBuffer class has one handy method to do that trick ( bindBufferAs() ),
and new primitive sets use osg::TextureBuffer as input.
For now I added new primitive sets to example ( DrawArraysIndirect and
MultiDrawArraysIndirect defined in examples/osggpucull/DrawIndirectPrimitiveSet.h ),
but if Robert will accept its current implementations ( I mean - primitive
sets that have osg::TextureBuffer in constructor ), I may add it to
osg/include/PrimitiveSet header.
- I used BufferTemplate class writen and published by Aurelien in submission forum
some time ago. For some reason this class never got into osg/include, but is
really needed during creation of UBOs, TBOs, and possibly SSBOs in the future.
I added std::vector specialization to that template class.
- I needed to create similar osg::Geometries with variable number of vertices
( to create different LODs in my example ). For this reason I've written
some code allowing me to create osg::Geometries from osg::Shape descendants.
This code may be found in ShapeToGeometry.* files. Examples of use are in
osggpucull.cpp . The question is : should this code stay in example, or should
it be moved to osgUtil ?
- this remark is important for NVidia cards on Linux and Windows : if
you have "Sync to VBlank" turned ON in nvidia-settings and you want to see
real GPU times in OSG statistics window, you must set the power management
settings to "Prefer maximum performance", because when "Adaptive mode" is used,
the graphic card's clock may be slowed down by the driver during program execution
( On Linux when OpenGL application starts in adaptive mode, clock should work
as fast as possible, but after one minute of program execution, the clock slows down ).
This happens when GPU time in OSG statistics window is shorter than 3 ms.
"
git-svn-id: http://svn.openscenegraph.org/osg/OpenSceneGraph/trunk@14531 16af8721-9629-0410-8352-f15c8da7e697
Requires shader files place in OpenSceneGraph-Data/shaders from OpenSceneGraph-Data's svn/trunk to function.
Run osgterrain example with --shader command line option to select displacement mapping shader approach.
git-svn-id: http://svn.openscenegraph.org/osg/OpenSceneGraph/trunk@14458 16af8721-9629-0410-8352-f15c8da7e697
There was code in the osgViewer/Viewer.cpp and osgViewer/CompositeViewer.cpp that transformed the Y-coordinates of an event. The code in the composite viewer did however miss the touch-data of the event. I thought that it should really be the GUIEventAdapter that should know about this, and hence I added the
GUIEventAdapter::setMouseYOrientationAndUpdateCoords which is re-computing the coordinates. First I simply added a boolean to the setMouseYOrientation function:
setMouseYOrientation( MouseYOrientation, bool updatecooreds=false );
but then the serializer complained.
This function is called from both the Viewer and the CompositeViewer. We have not tested from the viewer, but I cannot see it would not work from visual inspection.
The other change is in MultiTouchTrackballManipulator::handleMultiTouchDrag. I have removed the normalisation. The reason for that is that it normalised into screen coordinates from 0,0 to 1,1. The problem with that is that if you have a pinch event and you keep the distance say 300 pixels between your fingers, these 300 pixels represent 0.20 of the screen in the horizontal domain, but 0.3 of the screen in the vertical domain. A rotation of the pinch-fingers will hence result in a zoom in, as the normalised distance is changing between them.
A consequence of this is that I have changed the pan-code to use the same algorithm as the middle-mouse-pan.
The rest of it is very similar from previous revision, and there has been some fine-tuning here and there.
"
To select standard OpenGL 1/2 build with full backwards and forwards comtability use:
./configure
make
OR
./configure -DOPENGL_PROFILE=GL2
To select OpenGL 3 core profile build using GL3/gl3.h header:
./configure -DOPENGL_PROFILE=GL3
To select OpenGL Arb core profile build using GL/glcorearb.h header:
./configure -DOPENGL_PROFILE=GLCORE
To select OpenGL ES 1.1 profile use:
./configure -DOPENGL_PROFILE=GLES1
To select OpenGL ES 2 profile use:
./configure -DOPENGL_PROFILE=GLES2
Using OPENGL_PROFILE will select all the appropriate features required so no other settings in cmake will need to be adjusted.
The new configuration options are stored in the include/osg/OpenGL header that deprecates the old include/osg/GL header.
Added the Cmake option OSG_USE_LOCAL_LUA_SOURCE to control whether to build and use the Lua source code in the lua plugin, or look for lua as an external dependency.
To the Lua plugin added support for assigned lua functions to C++ osg::Objects via the new osg::CallbackObject mechanism. To invoke the scripts function from C++ one must get the CallbackObject and call run on it.
Renamed ScriptCallback to ScriptNodeCallback to avoid possibly confusion between osg::CallbackObject and the ScriptNodeCallback.
From Robert Osfield, changed the example so that the vertical and horizon scalar bars are rotated to the XZ plane so you can see them with the default viewer's camera orientation.
Tweaked the positioning of title text of vertic scalar bar to avoid overlap of text.
I added a new tag to p3d called forward_touch_event_to_device and renamed the existing forward_event_to_device to forward_mouse_event_to_device. This new tag will transmit touches to the virtual trackpad as touch events. I added the MultitouchTrackball to the p3d-app so zooming and moving a model remotely should now work, if you use forward_touch_event_to_device. I kept (and fixed) forward_mouse_event_to_device for background compatibility, so old presentations works as in previous versions, without the ability to zoom + scale. of course.
forward_touch_event_to_device needs some more testing, (e.g. with image-streams and keystone, afaik there’s no support for touch-events...) but for a first version it works nice.
"
with the --write-to-source-file-directory added to allow one to have the original behaviour
of writing to the same directory as the original source file.
* force _OPENTHREADS_ATOMIC_USE_BSD_ATOMIC for IOS device + simulator as the test does not pick the right implementation
* fixed a small compile-bug for iphone-example
* added a check to prevent multiple realization of a GraphicsWindowIOS-object
"
* MultiTouchTrackball: some code cleanup and support for normalized touch-points
* oscdevice: receiving and sending multi-touch-events via the Cursor2D-profile from TUIO
* added some documentation
* fixed a bug with multi-touch and touch-id-generation on iOS and OS X. (will fix a bug reported by Colin Cochran, without ditching the existing logic)
* removed unnecessary warning-flagss when generating xcode-projects via cmake, will enable the usage of OSG_AGGRESSIVE_WARNING_FLAGS
* added support for 10.9 (OS X)
* new cmake-variable: IPHONE_VERSION_MIN, this will set the deployment-target (previously hard-coded) If you set the IPHONE_VERSION_MIN to something like 7.0 osg gets compiled also for 64bit (amd64)
* cmake defaults now to the clang compiler if IPHONE_VERSION_MIN > 4.2
* cmake now sets some xcode-settings so the compiler uses the c++98-standard (clang defaults to c++11, w/o this I got a lot of linking errors)
* removed include-dir for avfoundation-plugin as not needed on OSX/IOS.
* enhanced the ios-example, will now show multitouch-information on a hud (similar to the osgmultitouch-example), and more importantly, will compile + link out of the box
* small enhancements for the osc-device-plugin (send only one msg for MOVE/DRAG, even if multiple msgs/event is enabled)
* better memory-handling for the zeroconf-plugin
* fixed a possible bug in the rest-http-plugin when receiving mouse-events.
* incorporated a fix from Colin Cochran "forwarded touch events are not transformed into the GL UIView“
"
1> osgmultiplemovies example does not use SDL so needs no link to SDL
2> Added header files to "Plugins osg" project, so visual studio can find the source of
OSG_WARN << "AsciiInputIterator::readProperty(): Unmatched property "
"
