If a 400 level error occurs, a FILE_NOT_FOUND ReadResult is appropriate.
If a 500 level error occurs (such a 503, Service unavailable), the application might want to try to load the file again in a few seconds/minutes. This submission returns ERROR_IN_READING_FILE if a 500 level error occurs so that clients can easily distinguish between the errors.
The actual error code is also added to the "message" of the ReadResult so if a client needs more information, they can just parse the message to retrieve the error code."
The graph is displayed "under" (behind) the normal bar chart you get when you press 's' twice. It doesn't hide the normal stats, you can still read them without any trouble, and that way, it doesn't take any more screen space. It starts from the left, and will scroll left when there is enough data to fill the screen width. The graph lines have the same colors we're used to (except I made the event color a bit bluer, so it's not exactly the same as the update color). A screen shot is attached.
The lines get a bit confused when they're all overlapping at the bottom of the graph, but I think that's the least of our concerns (if they're all at the bottom of the graph - except FPS of course - then great!).
The only thing I'm not very keen about is that to make things simple, I clamp the values to a given maximum. Right now, the maximums I have set are:
* Frame rate: 100 fps (people have 60, 75, 85Hz refresh rates, so there's no one right value, but I think 100 is OK)
* Stats: 0.016 seconds (what you need to get 60Hz minimum)
This could be changed so that the scale of the graph changes according to the maximum value in the last screenful of the graph instead of clamping values. We would then need to display the scale for each value on the side of the graph, because if the scale changes, you need to know what it is at this moment.
I tried to make things easy to change, so for example if you don't like that the graph is in the same space as the normal stats bars, it's easy to move it anywhere else, and make it have other dimensions. The maximums and colors are also easy to change.
The impact on performance should be minimal, since it's one vertex per graph line that's added per frame, and vertices are removed when they scroll off the screen, so you'll never have more than say 1280 * (3 + ncameras) vertices on the screen at one time. No polygons, I used line strips. The scrolling is done with a MatrixTransform."
Quicktime supports only files with 3/4-channels rgba-files and not 1/2-channels rgb-files.
This submission is from Tatsuhiro Nishioka, here's his original quote:
When FlightGear crashes, the error message
"GraphicsImportGetNaturalBounds failed" shows up. By adding printf
debug, I found the error was -8969: codecBadDataErr when loading a
gray-scaled (2 channels) rgba files even though the file can be loaded
with Gimp and osgViewer properly.
So I made an investigation on this problem and found an interesting
thing. This error occurs only when non-rgb files are loaded before rgb
files. The reason is that rgba files can be handled by both
osgdb_rgb.so and osgdb_qt.so, but the error happens only when
osgdb_qt.so try to load a gray-scaled rgba file.
When a program is about to load an rgba file, osgdb_rgb.so is loaded
and it handles the rgba file properly. In contrast, when a gray-scaled
rgb file is being loaded after a non-rgb file (say png) is already
loaded by osgdb_qt.so, osgdb_qt.so tries to load the file instead of
osgdb_rgb, which causes the error above.
Anyway, the bad thing is that QuickTime cannot handle gray-scaled rgb
files properly. The solution for this is not to let osgdb_qt handle
rgb files since osgdb_rgb can handle these properly.
"
This code will add two extra statistics options:
-Camera scene statistics, stats for the scene after culling (updated at 10 Hz)
-View scene statistics, stats for the complete scene (updated at 5 Hz)
Each camera and each view will expand the statistics to the right.
I also added the requests and objects to compile of the databasepager to the databasepager statistics.""
Attached is a change that is able to provide shared textures for the clamp and
the repeat case.
So this appears to be the best fix I guess ...
Also it additionaly shares the TexEnv StateAttribute in a whole ac3d model."
..\..\..\..\src\osgDB\Registry.cpp(910) : warning C4806: '==' : unsafe operation: no value of type 'bool' promoted to type 'osgDB::Registry::LoadStatus' can equal the given constant
A quick review of the code revealed a piece of code that was clearly wrong, possibly due to a copy-and-paste error.
"
The fix was to check whether glGetString( GL_VERSION ) returned a null pointer (Ref. svn diff below). The altered src/osg/GLExtensions.cpp is zipped and attached to this email."
"Soft shadow mapping is basically the same as hard shadow mapping beside that
it uses a different fragment shader.
So for me it makes sense that osgShadow::SoftShadowMap is derived from
osgShadow::ShadowMap, this makes it easier to maintain the two classes.
Additional SoftShadowMap also provides the same Debug methods as ShadowMap."
I think I may have discovered a bug in osgShadow/ShadowMap.cpp that results in incomplete shadows being generated.
The problem seems to caused by an incorrect interpretation of the spot light cutoff angle. The valid ranges for spot cutoff are 0-90 and 180, i.e half the 'field of view' for the spotlight. Whereas the shadow map code seems to assume the the spot cutoff is equal to the field of view. This results in the shadows generated by the spotlight getting clipped at half the spot cutoff angle.
I have fixed this in my copy of ShadowMap.cpp:
===============================
//Original code from OSG 2.6:
if(selectLight->getSpotCutoff() < 180.0f) // spotlight, then we don't need the bounding box
{
osg::Vec3 position(lightpos.x(), lightpos.y(), lightpos.z());
float spotAngle = selectLight->getSpotCutoff();
_camera->setProjectionMatrixAsPerspective(spotAngle, 1.0, 0.1, 1000.0);
_camera->setViewMatrixAsLookAt(position,position+lightDir,osg::Vec3(0.0f,1.0f,0.0f));
}
===============================
// My modifications:
float fov = selectLight->getSpotCutoff() * 2;
if(fov < 180.0f) // spotlight, then we don't need the bounding box
{
osg::Vec3 position(lightpos.x(), lightpos.y(), lightpos.z());
_camera->setProjectionMatrixAsPerspective(fov, 1.0, 0.1, 1000.0);
_camera->setViewMatrixAsLookAt(position,position+lightDir,osg::Vec3(0.0f,1.0f,0.0f));
}
This change seems correct for spot cutoff in the range 0, 90, but since OpenGL doesn't claim to support cutoffs >90 && <180, I'm not sure how shadow map should deal with those cases, but ignoring spot cut off greater than 90 here seems reasonable to me.
"
> Using QOSGWidget - QWidget + osgViewer creating the graphics context.
>
> Windows Error #2000: [Screen #0] GraphicsWindowWin32::setWindow() - Unable
> to create OpenGL rendering context. Reason: The pixel format is invalid.
>
>
>
> And then the following fate error pops up:
>
>
>
> The instruction at "0x014c7ef1" referenced memory at "0x000000a4", The
> memory could not be "read".
>
> Click on Ok to terminate the program
>
> Click on CANCEL to debug the program
>
>
- adds display of options when using osgconv --formats.
- adds useGroupPerFeature option to have each feature in a separate group. Usage: OSG_OPTIMIZER=OFF osgconv -e ogr -O addGroupPerFeature <infile> <outfile>
"
osg::ColorMask* leftColorMask = _renderStageLeft->getColorMask();
if (!leftColorMask)
{
leftColorMask = new osg::ColorMask();
_renderStageLeft->setColorMask(leftColorMask);
^^^^ here it said right, I think this should be Left.
}
// ensure that right eye color planes are active.
osg::ColorMask* rightColorMask = _renderStageRight->getColorMask();
^^^^ similar here, I think this should be right
if (!rightColorMask)
{
rightColorMask = new osg::ColorMask();
_renderStageRight->setColorMask(rightColorMask);
}
and i further removed an unnecessary setColorMask."
mode. Nevertheless, the code doesn't acknowledge that, so I had problems with
debug versions of the library not being able to open their plugins whereas
the release versions worked fine.
I have made the same changes in Registry.cpp that are available for the rest
of platforms appending that "d" to their plugins. I have also updated the
CMakeLists.txt file to get "_DEBUG" defined at compilation time. I have
copied the already existent conditional block because of cmake's bizarre
operator precedence. Since Cygwin defines both CYGWIN and WIN32, the
following would suffice:
IF(CYGWIN OR UNIX AND NOT WIN32 AND NOT APPLE)
Sadly, it actually doesn't work, so I wrote a new conditional block just for
Cygwin. I could join the two blocks when the parentheses support is added in
newer versions of cmake."
polygon offset complicate. so i looked for a solution to remove this offset.
i changed the shader, also the filtering (default: on) use now a correct 3x3 filter:
1 0 1
0 2 0
1 0 1
div: 6
of course a better one would be
1 2 1
2 4 2
1 2 1
div: 16
but this isn't as performant as the simple filter above is. because we need only 5 texture lookups instead of 9, and the result is still good, if you wish we can add a enum to change the pcf filter type once, if there is a need.
testet on NVidia Quatro 570M and on ATI Radeon X1600
"
unfort. i couldn't test it on any ATI system. may there will be still another problem there. if there are still some artefacts. we should try out better fZOffSet value
"
if(
(!win || win->getVisibilityMode() == Window::VM_PARTIAL) &&
!win->isPointerXYWithinVisible(x, y)
) continue;
But it probably should be
if (!win || (win->getVisibilityMode() == Window::VM_PARTIAL) && !win->isPointerXYWithinVisible(x, y)))
continue;
The effect of the bug is to segfault if a non-osgWidgets::Window node hasn't been excluded from picking via NodeMask."
set.
The optimization is based on the observation that matrix matrix multiplication
with a dense matrix 4x4 is 4^3 Operations whereas multiplication with a
transform, or scale matrix is only 4^2 operations. Which is a gain of a
*FACTOR*4* for these special cases.
The change implements these special cases, provides a unit test for these
implementation and converts uses of the expensiver dense matrix matrix
routine with the specialized versions.
Depending on the transform nodes in the scenegraph this change gives a
noticable improovement.
For example the osgforest code using the MatrixTransform is about 20% slower
than the same codepath using the PositionAttitudeTransform instead of the
MatrixTransform with this patch applied.
If I remember right, the sse type optimizations did *not* provide a factor 4
improovement. Also these changes are totally independent of any cpu or
instruction set architecture. So I would prefer to have this current kind of
change instead of some hand coded and cpu dependent assembly stuff. If we
need that hand tuned stuff, these can go on top of this changes which must
provide than hand optimized additional variants for the specialized versions
to give a even better result in the end.
An other change included here is a change to rotation matrix from quaterion
code. There is a sqrt call which couold be optimized away. Since we divide in
effect by sqrt(length)*sqrt(length) which is just length ...
"
they are written to disk, either inline or as an external file. Added support for
this in the .ive plugin. Default of WriteHint is NO_PREFERNCE, in which case it's
up to the reader/writer to decide.
The vertical separation not actually displayed as it is set. So some
display the up and down stereo images style will not be correct.
Someone may forget to change the "Horizontal" to "Vertical" after
copying and pasting the code from above HORIZONTAL_SPLIT code segment.
I've attached the file. By replacing the incorrect "Horizontal" to
"Vertical", the bug is gone.
"
occlusion query result is not ready for retrieval when the app tries to
retrieve it. This fix adds an application-level wait loop to ensure the
result is ready for retrieval. This code is not compiled by default; add "-D
FORCE_QUERY_RESULT_AVAILABLE_BEFORE_RETRIEVAL" to get this code.
Full, gory details, to the best of my recollection:
The conditions under which we encountered this issue are as follows: 64-bit
processor, Mac/Linux OS, multiple NVIDIA GPUs, multiple concurrent draw
threads, VRJuggler/SceneView-based viewer, and a scene graph containing
OcclusionQueryNodes. Todd wrote a small test program that produces an almost
instant crash in this environment. We verified the crash does not occur in a
similar environment with a 32-bit processor, but we have not yet tested on
Windows and have not yet tested with osgViewer.
The OpenGL spec states clearly that, if an occlusion query result is not yet
ready, an app can go ahead and attempt to retrieve it, and OpenGL will
simply block until the result is ready. Indeed, this is how
OcclusionQueryNode is written, and this has worked fine on several platforms
and configurations until Todd's test program.
By trial and error and dumb luck, we were able to workaround the crash by
inserting a wait loop that forces the app to only retrieve the query after
OpenGL says it is available. As this should not be required (OpenGL should
do this implicitly, and more efficiently), the wait loop code is not
compiled by default. Developers requiring this work around must explicitly
add "-D FORCE_QUERY_RESULT_AVAILABLE_BEFORE_RETRIEVAL" to the compile
options to include the wait loop."
when applying styles to a Label element the code below runs in a infinite loop.
The reason for this is that nothing increments the Reader "r" in the case when applying a style to label,
so I advance the reader when no match was found.
( To replicate the error apply style to any label)
replaced this:
while(!r.eof()) if(_styles[style]->applyStyle(t, r)) inc = true;
with this:
while(!r.eof())
{
if(_styles[style]->applyStyle(t, r))
inc = true;
else
r.advanceOverCurrentFieldOrBlock();
}
I tested it and it works well for me, I did not find any problems with it.
2. Added style support for Canvas element, event though there is no styles to apply yet.
It is usefull for someone who inherits from Canvas class to develop another element.
If applyStyle(Canvas) does not exist
there is no way to apply style to the element that inherited from Canvas element.
Added virtual
bool applyStyle(Canvas).
and in added call to apply style if the Object is of type Canvas:
StyleManager::_applyStyleToObject(osg::Object* obj, const std::string& style) {
...
else if(!std::string("Canvas").compare(c))
return _coerceAndApply<Canvas>(obj,style,c);
"
"I made several modifications:
* The cause of my errors was that my OSG source directory path contains spaces. To fix this issue I wrapped all paths with quotes, as stated in doxygen documentation.
* I also received some warning messages about deprecated doxygen settings, which I fixed by updating the doxygen file, i.e. running \u2018doxygen \u2013u doxygen.cmake\u2018. By running this command deprecated doxygen options are removed, some option comments have changed and quite some options have been added (I kept their default settings unless mentioned).
* I was surprised to find that the doxygen OUTPUT_DIRECTORY was set to \u201c${OpenSceneGraph_SOURCE_DIR}/doc\u201d, which does not seem appropriate for out of source builds; I changed this to \u201c${OpenSceneGraph_BINARY_DIR}/doc\u201d. (On the other hand, maybe a cmake selectable option should be given to the user?)
* Fixed two warnings I received about unexpected end-of-list-markers in \u2018osg\AnimationPath and \u2018osgUtil\CullVisitor due to excess trailing points in comments.
* Fixed a warning in osgWidget\StyleInterface due to an #include directive (strangely) placed inside a namespace.
* Fixed a warning in osg\Camera due to the META_Object macro that confused doxygen. Adding a semi-colon fixed this.
* Removed auto_Mainpage from the INCLUDE option, because I am positive that this file does not belong there; It never generated useful documentation anyway.
* I added the OSG version number environment variable to the PROJECT_NUMBER option so that the version number is now shown on the main page of generated documentation (e.g. index.html).
* Changed option FULL_PATH_NAMES to YES, but made sure STRIP_FROM_PATH stripped the absolute path until the include dir. This fixed an issue that created mangled names for identical filenames in different directories. E.g. osg/Export and osgDB/Export are now correctly named.
* Changed option SHOW_DIRECTORIES to yes, which is a case of preference I guess.
"
New attribute DatabasePager::_expiryFrames sets number of frames a PagedLOD child is kept in memory. The attribute is set with DatabasePager::setExpiryFrames method or OSG_EXPIRY_FRAMES environmental variable.
New attribute PagedLOD::PerRangeData::_
frameNumber contains frame number of last cull traversal.
Children of PagedLOD are expired when time _AND_ number of frames since last cull traversal exceed OSG_EXPIRY_DELAY _AND_ OSG_EXPIRY_FRAMES respectively. By default OSG_EXPIRY_FRAMES = 1 which means that nodes from last cull/rendering
traversal will not be expired even if last cull time exceeds OSG_EXPIRY_DELAY. Setting OSG_EXPIRY_FRAMES = 0 revokes previous behaviour of PagedLOD.
Setting OSG_EXPIRY_FRAMES > 0 fixes problems of children reloading in lazy rendering applications. Required behaviour is achieved by manipulating OSG_EXPIRY_DELAY and OSG_EXPIRY_FRAMES together.
Two interface changes are made:
DatabasePager::updateSceneGraph(double currentFrameTime) is replaced by DatabasePager::updateSceneGraph(const osg::FrameStamp &frameStamp). The previous method is in #if 0 clause in the header file. Robert, decide if You want to include it.
PagedLOD::removeExpiredChildren(double expiryTime, NodeList &removedChildren) is deprecated (warning is printed), when subclassing use PagedLOD::removeExpiredChildren(double expiryTime, int expiryFrame, NodeList &removedChildren) instead. "
use the osg::State::applyMode for enabling/disabling certain while
rendering the stencil mask. Previously some of these calls were
overriding the scene graph states because the global state was not
aware of this change.
"
Now we could correctly configure geometry shaders in osg files."
Notes from Robert Osfield, renamed the names of the parameters to be less GL centric and more human readable.
The following link shows a very comprehensive list of .mtl file options:
http://local.wasp.uwa.edu.au/~pbourke/dataformats/mtl/
Attached is a patch that should fix spacey filenames and optional texture scale/offset. I have tested it with files I have that I modified to contain spaces in the texture filenames."
