returns true if (the extension string is supported or GL version is greater than or equal to a specified version) and
non extension disable is used. This makes it possible to disable extensions that are now
available as parts of the core OpenGL spec.
Updated Texture.cpp is use this method.
/** Convinience method that sets the update callback of the node if it doesn't exist, or nest it into the existing one. */
void addUpdateCallback(NodeCallback* nc);
/** Convinience method that removes a given callback from a node, even if that callback is nested. There is no error return in case the given callback is not found. */
void removeUpdateCallback(NodeCallback* nc);
... and the same for Event and Cull callbacks methods."
--------------------------------------------
Descripton:
The patch does provide a new class PixelDataBufferObject which is capable of allocating memory on the GPU side (PBO memory) of arbitrary size. The memory can then further be used to be enabled into read mode (GL_PIXEL_UNPACK_BUFFER_ARB) or in write mode (GL_PIXEL_PACK_BUFFER_ARB). Enabling the buffer into write mode will force the driver to write data from bounded textures into that buffer (i.e. glGetTexImage). Using buffer in read mode give you the possibility to read data from the buffer into a texture with e.g. glTexSubImage or other instuctions. Hence no data is copied over the CPU (host memory), all the operations are done in the GPU memory.
--------------------------------------------
Compatibility:
The new class require the unbindBuffer method from the base class BufferObject to be virtual, which shouldn't break any functionality of already existing classes. Except of this the new class is fully orthogonal to existing one, hence can be safely added into already existing osg system.
--------------------------------------------
Testing:
The new class was tested in the current svn version of osgPPU. I am using the new class to copy data from textures into the PBO and hence provide them to CUDA kernels. Also reading the results back from CUDA is implemented using the provided patch. The given patch gives a possibility of easy interoperability between CUDA and osg (osgPPU ;) )
--------------------------------------------
I think in general it is a better way to derive the PixelBufferObject class from PixelDataBufferObject, since the second one is a generalization of the first one. However this could break the current functionality, hence I haven't implemented it in such a way. However I would push that on a stack of wished osg 3.x features, since this will reflect the OpenGL PBO functionality through the classes better.
"
* When used PDS RenderStage::runCameraSetUp sets flag that FBO has already stencil,depth buffer attached. Prevents adding next depth buffer.
* Sets correct traits for p-buffer if used PDS and something goes wrong with FBO setup or p-buffer is used directly.
* Adds warning to camera if user add depth/stencil already attached through PDS.
* Sets blitMask when use blit to resolve buffer.
There is also new example with using multisampled FBO."
I have not reverted added Compiler options. I assume that one may want to have warnings enabled for the application but may not want to see them while OSG libraries and examples compile.
Modified files:
osg/Export - now explicitly includes osg/Config to make sure OSG_DISABLE_MSVC_WARNINGS is read
osg/Config.in - declares OSG_DISABLE_MSVC_WARNINGS flag to be added to autogenerated osg/Config
CMakeLists.txt - declares OSG_DISABLE_MSVC_WARNINGS as option with default ON setting
"
facilitate the subclassing of Image providing interactive behaviours so as
used in the vnc interactive VncImage class.
osgViewer::InteractiveImageHandler provides an event handler that convertes osgGA
mouse and keyboard events into the coordinate frame of an image based on ray intersection with geometry in
the associated subgraph.
Changed the ordering of events processing in Viewer and CompositeViewer to allow
scene graph event handlers to take precidence over viewer event handlers and camera manipulators
To facilitate this possibility I have added a template copy constructor and a template assignment operator. These work for safe conversions like those in my previous example, but fail as desired for non-safe conversions since the template instantiation fails during the raw pointer copy/assignment.
The lack of this facility has appreciably handicapped development of generic algorithms applied to the scene graph, and I believe that this alteration will be welcomed by most of the community. If there are issues with antiquated compilers not supporting template member functions then perhaps a small piece of conditional compilation is in order.
I have made the change using the latest release version (2.6) as the base. The full file is attached.
I have not tested building the osg wrappers and the script binding code. I have tested the legal and illegal conversions of both copying and assignment to ensure that behave as expected on MSVC7.1, MSVC8, MSVC9, GCC 4.3."
set.
The optimization is based on the observation that matrix matrix multiplication
with a dense matrix 4x4 is 4^3 Operations whereas multiplication with a
transform, or scale matrix is only 4^2 operations. Which is a gain of a
*FACTOR*4* for these special cases.
The change implements these special cases, provides a unit test for these
implementation and converts uses of the expensiver dense matrix matrix
routine with the specialized versions.
Depending on the transform nodes in the scenegraph this change gives a
noticable improovement.
For example the osgforest code using the MatrixTransform is about 20% slower
than the same codepath using the PositionAttitudeTransform instead of the
MatrixTransform with this patch applied.
If I remember right, the sse type optimizations did *not* provide a factor 4
improovement. Also these changes are totally independent of any cpu or
instruction set architecture. So I would prefer to have this current kind of
change instead of some hand coded and cpu dependent assembly stuff. If we
need that hand tuned stuff, these can go on top of this changes which must
provide than hand optimized additional variants for the specialized versions
to give a even better result in the end.
An other change included here is a change to rotation matrix from quaterion
code. There is a sqrt call which couold be optimized away. Since we divide in
effect by sqrt(length)*sqrt(length) which is just length ...
"
they are written to disk, either inline or as an external file. Added support for
this in the .ive plugin. Default of WriteHint is NO_PREFERNCE, in which case it's
up to the reader/writer to decide.
"I made several modifications:
* The cause of my errors was that my OSG source directory path contains spaces. To fix this issue I wrapped all paths with quotes, as stated in doxygen documentation.
* I also received some warning messages about deprecated doxygen settings, which I fixed by updating the doxygen file, i.e. running \u2018doxygen \u2013u doxygen.cmake\u2018. By running this command deprecated doxygen options are removed, some option comments have changed and quite some options have been added (I kept their default settings unless mentioned).
* I was surprised to find that the doxygen OUTPUT_DIRECTORY was set to \u201c${OpenSceneGraph_SOURCE_DIR}/doc\u201d, which does not seem appropriate for out of source builds; I changed this to \u201c${OpenSceneGraph_BINARY_DIR}/doc\u201d. (On the other hand, maybe a cmake selectable option should be given to the user?)
* Fixed two warnings I received about unexpected end-of-list-markers in \u2018osg\AnimationPath and \u2018osgUtil\CullVisitor due to excess trailing points in comments.
* Fixed a warning in osgWidget\StyleInterface due to an #include directive (strangely) placed inside a namespace.
* Fixed a warning in osg\Camera due to the META_Object macro that confused doxygen. Adding a semi-colon fixed this.
* Removed auto_Mainpage from the INCLUDE option, because I am positive that this file does not belong there; It never generated useful documentation anyway.
* I added the OSG version number environment variable to the PROJECT_NUMBER option so that the version number is now shown on the main page of generated documentation (e.g. index.html).
* Changed option FULL_PATH_NAMES to YES, but made sure STRIP_FROM_PATH stripped the absolute path until the include dir. This fixed an issue that created mangled names for identical filenames in different directories. E.g. osg/Export and osgDB/Export are now correctly named.
* Changed option SHOW_DIRECTORIES to yes, which is a case of preference I guess.
"
New attribute DatabasePager::_expiryFrames sets number of frames a PagedLOD child is kept in memory. The attribute is set with DatabasePager::setExpiryFrames method or OSG_EXPIRY_FRAMES environmental variable.
New attribute PagedLOD::PerRangeData::_
frameNumber contains frame number of last cull traversal.
Children of PagedLOD are expired when time _AND_ number of frames since last cull traversal exceed OSG_EXPIRY_DELAY _AND_ OSG_EXPIRY_FRAMES respectively. By default OSG_EXPIRY_FRAMES = 1 which means that nodes from last cull/rendering
traversal will not be expired even if last cull time exceeds OSG_EXPIRY_DELAY. Setting OSG_EXPIRY_FRAMES = 0 revokes previous behaviour of PagedLOD.
Setting OSG_EXPIRY_FRAMES > 0 fixes problems of children reloading in lazy rendering applications. Required behaviour is achieved by manipulating OSG_EXPIRY_DELAY and OSG_EXPIRY_FRAMES together.
Two interface changes are made:
DatabasePager::updateSceneGraph(double currentFrameTime) is replaced by DatabasePager::updateSceneGraph(const osg::FrameStamp &frameStamp). The previous method is in #if 0 clause in the header file. Robert, decide if You want to include it.
PagedLOD::removeExpiredChildren(double expiryTime, NodeList &removedChildren) is deprecated (warning is printed), when subclassing use PagedLOD::removeExpiredChildren(double expiryTime, int expiryFrame, NodeList &removedChildren) instead. "
