"Soft shadow mapping is basically the same as hard shadow mapping beside that
it uses a different fragment shader.
So for me it makes sense that osgShadow::SoftShadowMap is derived from
osgShadow::ShadowMap, this makes it easier to maintain the two classes.
Additional SoftShadowMap also provides the same Debug methods as ShadowMap."
set.
The optimization is based on the observation that matrix matrix multiplication
with a dense matrix 4x4 is 4^3 Operations whereas multiplication with a
transform, or scale matrix is only 4^2 operations. Which is a gain of a
*FACTOR*4* for these special cases.
The change implements these special cases, provides a unit test for these
implementation and converts uses of the expensiver dense matrix matrix
routine with the specialized versions.
Depending on the transform nodes in the scenegraph this change gives a
noticable improovement.
For example the osgforest code using the MatrixTransform is about 20% slower
than the same codepath using the PositionAttitudeTransform instead of the
MatrixTransform with this patch applied.
If I remember right, the sse type optimizations did *not* provide a factor 4
improovement. Also these changes are totally independent of any cpu or
instruction set architecture. So I would prefer to have this current kind of
change instead of some hand coded and cpu dependent assembly stuff. If we
need that hand tuned stuff, these can go on top of this changes which must
provide than hand optimized additional variants for the specialized versions
to give a even better result in the end.
An other change included here is a change to rotation matrix from quaterion
code. There is a sqrt call which couold be optimized away. Since we divide in
effect by sqrt(length)*sqrt(length) which is just length ...
"
they are written to disk, either inline or as an external file. Added support for
this in the .ive plugin. Default of WriteHint is NO_PREFERNCE, in which case it's
up to the reader/writer to decide.
when applying styles to a Label element the code below runs in a infinite loop.
The reason for this is that nothing increments the Reader "r" in the case when applying a style to label,
so I advance the reader when no match was found.
( To replicate the error apply style to any label)
replaced this:
while(!r.eof()) if(_styles[style]->applyStyle(t, r)) inc = true;
with this:
while(!r.eof())
{
if(_styles[style]->applyStyle(t, r))
inc = true;
else
r.advanceOverCurrentFieldOrBlock();
}
I tested it and it works well for me, I did not find any problems with it.
2. Added style support for Canvas element, event though there is no styles to apply yet.
It is usefull for someone who inherits from Canvas class to develop another element.
If applyStyle(Canvas) does not exist
there is no way to apply style to the element that inherited from Canvas element.
Added virtual
bool applyStyle(Canvas).
and in added call to apply style if the Object is of type Canvas:
StyleManager::_applyStyleToObject(osg::Object* obj, const std::string& style) {
...
else if(!std::string("Canvas").compare(c))
return _coerceAndApply<Canvas>(obj,style,c);
"
"I made several modifications:
* The cause of my errors was that my OSG source directory path contains spaces. To fix this issue I wrapped all paths with quotes, as stated in doxygen documentation.
* I also received some warning messages about deprecated doxygen settings, which I fixed by updating the doxygen file, i.e. running \u2018doxygen \u2013u doxygen.cmake\u2018. By running this command deprecated doxygen options are removed, some option comments have changed and quite some options have been added (I kept their default settings unless mentioned).
* I was surprised to find that the doxygen OUTPUT_DIRECTORY was set to \u201c${OpenSceneGraph_SOURCE_DIR}/doc\u201d, which does not seem appropriate for out of source builds; I changed this to \u201c${OpenSceneGraph_BINARY_DIR}/doc\u201d. (On the other hand, maybe a cmake selectable option should be given to the user?)
* Fixed two warnings I received about unexpected end-of-list-markers in \u2018osg\AnimationPath and \u2018osgUtil\CullVisitor due to excess trailing points in comments.
* Fixed a warning in osgWidget\StyleInterface due to an #include directive (strangely) placed inside a namespace.
* Fixed a warning in osg\Camera due to the META_Object macro that confused doxygen. Adding a semi-colon fixed this.
* Removed auto_Mainpage from the INCLUDE option, because I am positive that this file does not belong there; It never generated useful documentation anyway.
* I added the OSG version number environment variable to the PROJECT_NUMBER option so that the version number is now shown on the main page of generated documentation (e.g. index.html).
* Changed option FULL_PATH_NAMES to YES, but made sure STRIP_FROM_PATH stripped the absolute path until the include dir. This fixed an issue that created mangled names for identical filenames in different directories. E.g. osg/Export and osgDB/Export are now correctly named.
* Changed option SHOW_DIRECTORIES to yes, which is a case of preference I guess.
"
New attribute DatabasePager::_expiryFrames sets number of frames a PagedLOD child is kept in memory. The attribute is set with DatabasePager::setExpiryFrames method or OSG_EXPIRY_FRAMES environmental variable.
New attribute PagedLOD::PerRangeData::_
frameNumber contains frame number of last cull traversal.
Children of PagedLOD are expired when time _AND_ number of frames since last cull traversal exceed OSG_EXPIRY_DELAY _AND_ OSG_EXPIRY_FRAMES respectively. By default OSG_EXPIRY_FRAMES = 1 which means that nodes from last cull/rendering
traversal will not be expired even if last cull time exceeds OSG_EXPIRY_DELAY. Setting OSG_EXPIRY_FRAMES = 0 revokes previous behaviour of PagedLOD.
Setting OSG_EXPIRY_FRAMES > 0 fixes problems of children reloading in lazy rendering applications. Required behaviour is achieved by manipulating OSG_EXPIRY_DELAY and OSG_EXPIRY_FRAMES together.
Two interface changes are made:
DatabasePager::updateSceneGraph(double currentFrameTime) is replaced by DatabasePager::updateSceneGraph(const osg::FrameStamp &frameStamp). The previous method is in #if 0 clause in the header file. Robert, decide if You want to include it.
PagedLOD::removeExpiredChildren(double expiryTime, NodeList &removedChildren) is deprecated (warning is printed), when subclassing use PagedLOD::removeExpiredChildren(double expiryTime, int expiryFrame, NodeList &removedChildren) instead. "
viewer.addEventHandler(new osgViewer::ScreenCaptureHandler(
new osgViewer::WriteToFileCaptureOperation("filename", "jpg")));
and the filename will be what you want. The WriteToFileCaptureOperation will add the context ID and the file number (if in SEQUENTIAL_NUMBER mode) to the file name.
(The attached also clarifies some notify messages, and corrects the comment when adding the handler in osgviewer.cpp)
I also remembered, the current architecture could allow a different CaptureOperation for each context, but currently the API only allows setting one CaptureOperation for all contexts. This could be improved if need be.
"
with gcc (version 4.3.1) I got the following error message in
include/osgUtil/TriStripVisitor and Tessellator
error: type qualifiers ignored on function return type
The errors belong all to a INLINE function definition. Find attached my
modified version."
Notes from Robert Osfield, I've merged osgWidget trunk, and added/changed CMakeLists.txt file to make it suitable for inclusion in the core OSG, and moved imagery/scripts/shaders out into OpenSceneGraph-Data
to optimize away duplicate state with dynamic, static and unspecified DataVarience. By default
the code now optimizes away duplicate state with either static and unspecied state, previously
it was just handling static state.
implementation of the atomic increment and decrement into a implementation
file.
This way inlining and compiler optimization can no longer happen for these
implementations, but it fixes compilation on win32 msvc targets. I expect
that this is still faster than with with mutexes.
Also the i386 gcc target gets atomic operations with this patch. By using an
implementation file we can guarantee that we have the right compiler flags
available."
atomic related compile failures with msvs2005. Attached changes to make win32
really use the atomic stuff. There are pointer typecast problems and some
historic alignment restrictions that I just took from a previous similar
implementation of mine without looking deep enough. "
From Robert Osfield, made a range of changes to Terry's visitor integrating it into osgUtil::Optimizer and
changing the code to use a style more like the rest of the OSG.
"I have taken the liberty of updating a few files so that there is no longer any derivation from std::vector. I have done this by adding a new file osg/MixinVector and by updating only two others: osg/PrimitiveSet and osg/Array. You will notice that this actually removes what is acknowledged as a \u2018hack\u2019 in osg/PrimitiveSet.
With the original code I did manage to find memory leaks with some compiler options on VC 8 and 9, as well as Intel compiler. I determined the leak existence by instrumenting the destructor code, and by use of a garbage collector as a leak detector (in a similar manner to the Firefox project). Hence in contrast to what I said originally, it is exhibiting symptoms on at least some platforms.
Since I am trying to be a good OSG citizen I got out my editor and started hacking! I have built and tested on Linux (Ubuntu) with GCC 4.x and Windows VC 8 SP1. It appears that nothing is broken, and that I\u2019m using less memory J"
viewport settings in stereo mode. It seems that the SceneView::cull()
method will pass the full size viewport to the left/right
cullvisitors, instead of the modified stereo viewport. I made quite a
few changes to SceneView to fix the issue. The SceneView::cullStage()
method will now receive the viewport as an argument, instead of using
the global viewport. The SceneView::cull() method will pass the
modifed viewport to cullStage when rendering in stereo.
There are 2 new private methods computeLeftEyeViewport() and
computeRightEyeViewport() that will compute the stereo viewports. I
also modified the draw() function so it applies the correct viewport
to the prerender stages. These changes are only necessary for
horizontal/vertical split stereo."
via StateSet::setNestedRenderBin(bool) whether the new RenderBin should be nested
with the existing RenderBin, or be nested with the enclosing RenderStage.
GL_GENERATE_MIPMAP_SGIS is very slow (over half a second for a 720*576
texture). However, glGenerateMipmapEXT() performs well (16ms for the
same texture), so I have modified the attached files to use
Texture::generateMipmap() if glGenerateMipmapEXT is supported, instead
of enabling & disabling GL_GENERATE_MIPMAP_SGIS."
Notes, from Robert Osfield, I've tested the out of the previous path using
GL_GENERATE_MIPMAP_SGIS and non power of two textures on NVidia 7800GT and
Nvidia linux drivers with the image size 720x576 and only get compile times
of 56ms, so the above half second speed looks to be a driver bug. With
Muchael's changes the cost goes done to less than 5ms, so it's certainly
an effective change, even given that Michael's poor expereiences with
GL_GENERATE_MIP_SGIS do look to be a driver bug.
now holds the dirty flag and enables/disables event traversal in response dirty
being set/unset. This allows terrain to be automatically updated in response
to Terrain scale and sample ratio changes.
- Solves issues of loading image data into the texture memory
- Print a warning if images are of different dimensions or have different internal formats (GL specification requires images to be the same)
Patch is tested and seems to work fine. It shouldn't break any other functionality. It should go into include/osg and src/osg
"
multi-threaded paging, where the Pager manages threads of reading local
and http files via seperate threads. This makes it possible to smoothly
browse large databases where parts of the data are locally cached while
others are on a remote server. Previously with this type of dataset
the pager would stall all paging while http requests were being served,
even when parts of the models are still loadable virtue of being in the
local cache.
Also as part of the refactoring the DatabaseRequest are now stored in the
ProxyNode/PagedLOD nodes to facilitate quite updating in the cull traversal,
with the new code avoiding mutex locks and searches. Previous on big
databases the overhead involved in make database requests could accumulate
to a point where it'd cause the cull traversal to break frame. The overhead
now is negligable.
Finally OSG_FILE_CACHE support has been moved from the curl plugin into
the DatabasePager. Eventually this functionality will be moved out into
osgDB for more general usage.
ReaderWriter::ReadResult now has a FILE_REQUEST enum.
ReaderWriter::Options now has a s/getAsynchronousFileReadHint() parameter methods.
libcurl based plugin now detects enabing of the AsynchronousFileReadHint, but
as yet does not handle async requests - handling everything syncronously.
DatabasePager now by default will enable AsynchronousFileReadHint for http
based file requests
avoid threading issues associated with compile running in a parallel with
update/cull on the first frame.
Also added automatic recompile when a new SceneData is applied to a View.
get an excess Tab key report when switching back to an OSG
application (usually FlightGear :-). Although KDE has consumed
the Tab, it's sometimes still in the XKeymapEvent's key_vector,
and followed by a Tab KeyRelease event.
Avoid this artifact by
- asking for a "fresh" keymap (via XQueryKeymap()), rather than
using the unreliable(?) XKeymapEvent's key_vector, and by
- flushing all key events on focus-in (to avoid the KeyRelease)
After Super-press, Tab-press, Super-release, Tab-release (note
the wrong release order!) I still get an extra Tab event. But
this is not surprising and not exactly wrong either. Also it's
hard to avoid, as we can't see what happened to the keyboard
before we regained focus.
Files changed:
src/osgViewer/GraphicsWindowX11.cpp
include/osgViewer/api/X11/GraphicsWindowX11"
It's implemented in the same way that 3D Spherical Display and Panoramic Spherical Display.
You can test it running:
osgviewer --wowvx-20 cow.osg
osgviewer --wowvx-42 cow.osg
depending on the size of your Philips WOWvx display (20" or 42")
Other arguments you can use to control the 3D effect are:
--wow-content <value>
This value defines the kind of content that can be:
0: No depth
1: Signage
2: Movie
3: CGI
4: Still
--wow-factor <value>
Percentage of the display recommended depth value. Default 64, Range [0-255]
--wow-offset <value>
Amount of range behind the screen. Default 128, Range [0-255]
0: Range is shifted in the direction of the viewer.
128: Range is equally divided in front and behind the screen.
255: Range is shifted away from the viewer.
"
from: DEEP_COPY_STATESETS = 8,
to: DEEP_COPY_STATESETS = 1<<3,
showing clearly that this isn't the _value_ 8, but the _bit_ 8. this is an old pattern i see (and like to promulgate) to make code a bit more readable and maintainable.
"
From Robert Osfield, refactored the FrameBufferObejcts::_drawBuffers set up so that its done
within the setAttachment method to avoid potential threading/execution order issues.
hyper keys defined already, but these modifiers were missing in
GUIEventAdapter::ModKeyMask, and the EventQueue ingored them as well.
The attached diff/archive adds the missing parts for Super/Hyper
modifier key support.
I'm aware that this might not be supported on all systems/keyboards
out of the box, but decided to submit it anyway because:
- developers are aware of differences between input devices
(Some mice have scroll wheels, others don't. Some have five or
more buttons, some have only one. Some keyboards don't have
numpads, some have AltGr, some don't etc.)
- even if someone relies on Hyper/Super in distributed software,
this is easy to fix and doesn't create lock-in conditions
- while the names Hyper/Super may only be common on X11, they are
just symbol names and not OS-specific
- even though some systems might not offer these additional modifiers
by default, it's likely that all of them have at least 8 modifier
levels internally, so it should only be a matter of OS configuration
to make them work
- having super/hyper available is useful to offer a user ways
to define local key definitions that are safe from collisions with
predefined "official" key assignments"
Introduced code in BoundgingSphere, BoundingBox, ProxyNode and LOD to utilise the above settings.
Added Matrix::value_type, Plane::value_type, BoundingSphere::value_type and BoundingBox::value_type command line
options that report where the types of floats or doubles.
This change has been done to make it easier for OpenSceneGraph users to check out the svn via https
without any conflicts introduced with a http externals.
as not expiring subgraphs quick enough to enable reasonable load balancing.
New version isn't perfect and will need further work, but does at least reduce
the memory footprint by as much as half on test paths on big databases.
The rewritten method no longer uses the the MaximumNumOfRemovedChildPagedLODs
and MinimumNumOfInactivePagedLODs variables so these and associated methods
for accessing them have been removed.
- /** Set the maximum number of PagedLOD child to remove per frame */
- void setMaximumNumOfRemovedChildPagedLODs(unsigned int number) { _maximumNumOfRemovedChildPagedLODs = number; }
-
- /** Get the maximum number of PagedLOD child to remove per frame */
- unsigned int getMaximumNumOfRemovedChildPagedLODs() const { return _maximumNumOfRemovedChildPagedLODs; }
-
- /** Set the minimum number of inactive PagedLOD child to keep */
- void setMinimumNumOfInactivePagedLODs(unsigned int number) { _minimumNumOfInactivePagedLODs = number; }
-
- /** Get the minimum number of inactive PagedLOD child to keep */
- unsigned int getMinimumNumOfInactivePagedLODs() const { return _minimumNumOfInactivePagedLODs; }
key, but it didn't pick up the initial state. So, if NumLock was on for
the OS at startup (LED on), it was still off for OSG. And the first
keypress turned the LED off, and NumLock on for OSG. The attached fix
picks up the state on every FocusIn, just like it was done in the last
commits for CapsLock. The difference is, that the NumLock mask isn't
standardized (e.g. 0x10 for Linux, and 0x80 for AIX), so we have to do
a reverse lookup (::rescanModifierMapping()).
Note that I could not reproduce the problem on my system, but someone
else confirmed it twice on his, and the patch fixed it for him.
Changed files:
./include/osgViewer/api/X11/GraphicsWindowX11
./src/osgViewer/GraphicsWindowX11.cpp
"
and a new scheme for computing the scaling when using autoscale that introduces smooth
transitions to the scaling of the subgraph so that it looks more natural.
help manage the scaling of particles, whether they should be relative to the
local coordiante frame of the particle system, or be in world coordinates.
It sets osgGA's keymask when restoring keys on FocusIn, according
to the state values of XKeyEvent and XCrossingEvent. (These are
the only source for X11's current capslock state that avoids
pulling in the XKB extension.)
"
osgViewer::StatsHandler and other handlers which allow you to change the
key(s) you would press to get them to do something. Pretty simple change
but useful in our context and possibly in others too."
The win32 pbuffer implementation returned an error unless both the
WGL_ARB_pbuffer and the WGL_ARB_render_texture functions were present.
This was too restrictive, as a pbuffer can usefully be created without
render-to-texture, e.g. for use with glReadPixels. The osg 1.2/Producer
pbuffers worked without RTT, and osgUtil::RenderStage has all the code to
handle both RTT and non-RTT pbuffers, doing a read and copy in the
latter case.
With these changes I have successfully tested the osgprerender example
on a graphics card which supports RTT, and one which doesn't. Plus
tested in my own application.
In order to aid diagnostics I have also added more function status
return checks, and associated error messages. I have included the win32
error text in all error messages output. And there were some errors
with multi-threaded handling of "bind to texture" and a temporary window
context which I have corrected.
These is one (pre-existing) problem with multi-threaded use of pbuffers
in osgViewer & osgprerender, which I have not been able to fix. A win32
device context (HDC) can only be destroyed from the thread that created
it. The pbuffers for pre-render cameras are created in
osgUtil::RenderStage::runCameraSetUp, from the draw thread. But
closeImplementation is normally invoked from the destructor in the main
application thread. With the additional error messages I have added,
osgprerender will now output a couple of warnings from
osgViewer::PixelBufferWin32::closeImplementation() at exit, after
running multi-threaded on windows. I think that is a good thing, to
highlight the problem. I looked into fixing it in osgViewer::Renderer &
osgUtil::RenderStage, but it was too involved for me. My own
application requirements are only single-threaded.
Unrelated fix - an uninitialised variable in
osg::GraphicsThread::FlushDeletedGLObjectsOperation().
"
remain in pressed state after revealing, even if they are no
longer pressed on the keyboard. This can have bad effects,
especially if the stuck keys are modifier keys. One has to
press and release the stuck keys again to reset the wrong state.
The fix keeps track of all key presses and releases. On FocusOut
and UnmapNotify it releases all keys that are in pressed state,
and on KeymapNotify (following a FocusIn), it sets the currently
pressed keys again. To avoid confusion in the OSG-using application
normal keys are always reported released /before/ and pressed
/after/ modifier keys.
As current key states are returned as char[32] keymap by
XQueryKeymap and XKeymapEvent, this format is also used to
recognize modifier keys and for maintaining the current
internal key state. Functions to set/clear/query bits in
such a keymap are added.
The patch was extensively tested with osgkeyboard and
FlightGear under KDE and fvwm2. It was not tested on a
Xinerama setup or with multiple windows, but as _eventDisplay
is used throughout, there should be no problems. The patch also
makes the following changes:
- removes old and obsolete handling of modifier keys in ::adaptKey().
This wasn't only unused, but also wrong (and for that reason commented
out in revision 7066). The modifier states are actually handled
in ./src/osgGA/EventQueue.cpp (EventQueue::keyPress/keyRelease).
- fixes some spelling"
The modifications I made are very small but they are absolutely usefull to use osgIntrospection with visual studio 7.1 or 8 in debug modes.
This should also solve other minor common problems (converter memory leak, virtual destructor for PropertyInfo, etc...).
I choosed two function names : Reflection::uninitialize() and Type::reset(), this can of course be changed if someone has a better idea...
I made the changes against OSG 2.2.0 public release. I tested the result with VS 7.1, VS 7.1 SP1, VS 8.0 SP1 and AQTime 5.0 on Windows XP SP2... All 4 seem to agree : they detected memory leaks before and don't anymore.
Sorry I haven't take the time to test that on linux but the changes are so small I doubt there could be a problem... I let you check that on your side :-).
I hope this will help making OSG an even more wonderfull library."
Attached is a fixed version of OverlayNode.cpp. I fixed CustomPolytope::cut( osg::Plane ) method. Bug was apparent in such scenario:
Let P1 be some random frustum polytope
Let P2 be the polytope that was created from P1 bounding box (P2 contains P1 entirely)
Then ignoring precision errors: P1.cut( P2 ) == P2.cut( P1 ) == P1. But this condition was not always met. Cut failed when some of the polytope reference points happened to lie exactly on some intersecting planes in both P1 & P2 (plane distance was = 0).
I only use CustomPolytope for my shadowing stuff so I did not test how this affects rest of OverlayNode.cpp.
----2----
Also attached is a minor precision improvement for osg::Plane intersect method (double version).
----3----
I have also one observation regarding osg::Plane - There are two intersect vertices methods (float and double flavour):
inline int intersect(const std::vector<Vec3>& vertices) const
inline int intersect(const std::vector<Vec3d>& vertices) const
I guess osg::Plane won't compile when someone changes default vec3 typedef to vec3d. Shouldn't the first method be changed to use vec3f explicitly ? Ie:
inline int intersect(const std::vector<Vec3f>& vertices) const"
pbuffer functions or exactly ask for the extensions we need to call the
apropriate glx extension functions for and around pbuffers extensions.
The glx 1.3 version of this functios are prefered. If this is not pressent we
are looking for the glx extensions and check for them.
Prevously we just used some mix of the glx 1.3 functions or the extension
functions without making sure that this extension is present.
"
