"ADS-B Out" add-on for SoftRF-Emu, Stratux, etc...

This repository contains "ADS-B Out" encoder for Tx-capable SDR hardware.

It is currently written in architecture independent Python language and can be used as an add-on for existing open source "ADS-B In" solutions. One known good example is Stratux.

ES (1090 MHz) variant of ADS-B surveillance technology is being considered here.
For UAT ADS-B (978 MHz) option, please, visit this repository: https://github.com/lyusupov/UAT-test-signal

Disclaimer

The source code is published for academic purpose only.

Instructions

1. Execute ADSB_Encoder.py script with <ICAO> <Latitude> <Longitude> <Altitude> arguments:

$ ADSB_Encoder.py  0xABCDEF 12.34 56.78 9999.0
$ ls Samples.iq8s
Samples.iq8s
$

2. Make the raw signal file aligned to 256K buffer size:

$ dd if=Samples.iq8s of=Samples_256K.iq8s bs=4k seek=63
1+0 records in
1+0 records out
4096 bytes (4.1 kB) copied, 0.00110421 s, 3.7 MB/s
$

3. Transmit the signal into air:

$ hackrf_transfer -t Samples_256K.iq8s -f 868000000 -s 2000000 -x 10
call hackrf_sample_rate_set(2000000 Hz/2.000 MHz)
call hackrf_baseband_filter_bandwidth_set(1750000 Hz/1.750 MHz)
call hackrf_set_freq(868000000 Hz/868.000 MHz)
Stop with Ctrl-C
 0.5 MiB / 1.000 sec =  0.5 MiB/second

User cancel, exiting...
Total time: 1.00038 s
hackrf_stop_tx() done
hackrf_close() done
hackrf_exit() done
fclose(fd) done
exit
$

Validation

$ sudo dump1090 --net --freq 868000000
...

References

1. "Gr-Air-Modes", Nick Foster, 2012
2. "EXPLOITING THE AUTOMATIC DEPENDENT SURVEILLANCE BROADCAST SYSTEM VIA FALSE TARGET INJECTION", Domenic Magazu III, 2012
3. "ADS-B out by HACKRF and received over the air by rtl-sdr dongle and dump1090", Jiao Xianjun, 2014
4. "Ghost in the Air(Traffic): On insecurity of ADS-B protocol and practical attacks on ADS-B devices", Andrei Costin and Aurelien Francillon, 2015
5. "ADS-B Decoding Guide", Junzi Sun, 2017