libpri/pri.c
2004-05-19 21:01:36 +00:00

395 lines
8.5 KiB
C
Executable File

/*
* libpri: An implementation of Primary Rate ISDN
*
* Written by Mark Spencer <markster@linux-suppot.net>
*
* This program is confidential
*
* Copyright (C) 2001, Linux Support Services, Inc.
* All Rights Reserved.
*
*/
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/select.h>
#include <stdarg.h>
#include "libpri.h"
#include "pri_internal.h"
#include "pri_q921.h"
#include "pri_q931.h"
char *pri_node2str(int node)
{
switch(node) {
case PRI_UNKNOWN:
return "Unknown node type";
case PRI_NETWORK:
return "Network";
case PRI_CPE:
return "CPE";
default:
return "Invalid value";
}
}
char *pri_switch2str(int sw)
{
switch(sw) {
case PRI_SWITCH_NI2:
return "National ISDN";
case PRI_SWITCH_DMS100:
return "Nortel DMS100";
case PRI_SWITCH_LUCENT5E:
return "Lucent 5E";
case PRI_SWITCH_ATT4ESS:
return "AT&T 4ESS";
case PRI_SWITCH_NI1:
return "National ISDN 1";
case PRI_SWITCH_EUROISDN_E1:
return "EuroISDN";
default:
return "Unknown switchtype";
}
}
struct pri *pri_new(int fd, int node, int switchtype)
{
struct pri *p;
p = malloc(sizeof(struct pri));
if (p) {
memset(p, 0, sizeof(struct pri));
p->fd = fd;
p->localtype = node;
p->switchtype = switchtype;
p->cref = 1;
#ifdef LIBPRI_COUNTERS
p->q921_rxcount = 0;
p->q921_txcount = 0;
p->q931_rxcount = 0;
p->q931_txcount = 0;
#endif
/* Start Q.921 layer, Wait if we're the network */
q921_start(p, p->localtype == PRI_CPE);
}
return p;
}
char *pri_event2str(int id)
{
switch(id) {
case PRI_EVENT_DCHAN_UP:
return "D-Channel Up";
case PRI_EVENT_DCHAN_DOWN:
return "D-channel Down";
case PRI_EVENT_RESTART:
return "Restart channel";
case PRI_EVENT_RING:
return "Ring";
case PRI_EVENT_CONFIG_ERR:
return "Configuration Error";
default:
return "Unknown Event";
}
}
pri_event *pri_check_event(struct pri *pri)
{
char buf[1024];
int res;
pri_event *e;
res = read(pri->fd, buf, sizeof(buf));
if (res < 0) {
if (errno != EAGAIN)
pri_error("Read on %d failed: %s\n", pri->fd, strerror(errno));
return NULL;
}
if (!res)
return NULL;
/* Receive the q921 packet */
e = q921_receive(pri, (q921_h *)buf, res);
return e;
}
static int wait_pri(struct pri *pri)
{
struct timeval *tv, real;
fd_set fds;
int res;
FD_ZERO(&fds);
FD_SET(pri->fd, &fds);
tv = pri_schedule_next(pri);
if (tv) {
gettimeofday(&real, NULL);
real.tv_sec = tv->tv_sec - real.tv_sec;
real.tv_usec = tv->tv_usec - real.tv_usec;
if (real.tv_usec < 0) {
real.tv_usec += 1000000;
real.tv_sec -= 1;
}
if (real.tv_sec < 0) {
real.tv_sec = 0;
real.tv_usec = 0;
}
}
res = select(pri->fd + 1, &fds, NULL, NULL, tv ? &real : tv);
if (res < 0)
return -1;
return res;
}
pri_event *pri_mkerror(struct pri *pri, char *errstr)
{
/* Return a configuration error */
pri->ev.err.e = PRI_EVENT_CONFIG_ERR;
strncpy(pri->ev.err.err, errstr, sizeof(pri->ev.err.err) - 1);
return &pri->ev;
}
pri_event *pri_dchannel_run(struct pri *pri, int block)
{
pri_event *e;
int res;
if (!pri)
return NULL;
if (block) {
do {
e = NULL;
res = wait_pri(pri);
/* Check for error / interruption */
if (res < 0)
return NULL;
if (!res)
e = pri_schedule_run(pri);
else
e = pri_check_event(pri);
} while(!e);
} else {
e = pri_check_event(pri);
return e;
}
return e;
}
void pri_set_debug(struct pri *pri, int debug)
{
if (!pri)
return;
pri->debug = debug;
}
int pri_acknowledge(struct pri *pri, q931_call *call, int channel, int info)
{
if (!pri || !call)
return -1;
return q931_alerting(pri, call, channel, info);
}
int pri_proceeding(struct pri *pri, q931_call *call, int channel, int info)
{
if (!pri || !call)
return -1;
return q931_call_proceeding(pri, call, channel, info);
}
int pri_progress(struct pri *pri, q931_call *call, int channel, int info)
{
if (!pri || !call)
return -1;
return q931_call_progress(pri, call, channel, info);
}
int pri_information(struct pri *pri, q931_call *call, char digit)
{
if (!pri || !call)
return -1;
return q931_information(pri, call, digit);
}
void pri_destroycall(struct pri *pri, q931_call *call)
{
if (pri && call)
__q931_destroycall(pri, call);
return;
}
int pri_need_more_info(struct pri *pri, q931_call *call, int channel, int nonisdn)
{
if (!pri || !call)
return -1;
return q931_setup_ack(pri, call, channel, nonisdn);
}
int pri_answer(struct pri *pri, q931_call *call, int channel, int nonisdn)
{
if (!pri || !call)
return -1;
return q931_connect(pri, call, channel, nonisdn);
}
#if 0
/* deprecated routines, use pri_hangup */
int pri_release(struct pri *pri, q931_call *call, int cause)
{
if (!pri || !call)
return -1;
return q931_release(pri, call, cause);
}
int pri_disconnect(struct pri *pri, q931_call *call, int cause)
{
if (!pri || !call)
return -1;
return q931_disconnect(pri, call, cause);
}
#endif
int pri_hangup(struct pri *pri, q931_call *call, int cause)
{
if (!pri || !call)
return -1;
if (cause == -1)
/* normal clear cause */
cause = 16;
return q931_hangup(pri, call, cause);
}
int pri_reset(struct pri *pri, int channel)
{
if (!pri)
return -1;
return q931_restart(pri, channel);
}
q931_call *pri_new_call(struct pri *pri)
{
if (!pri)
return NULL;
return q931_new_call(pri);
}
void pri_dump_event(struct pri *pri, pri_event *e)
{
if (!pri || !e)
return;
pri_message("Event type: %s (%d)\n", pri_event2str(e->gen.e), e->gen.e);
switch(e->gen.e) {
case PRI_EVENT_DCHAN_UP:
case PRI_EVENT_DCHAN_DOWN:
break;
case PRI_EVENT_CONFIG_ERR:
pri_message("Error: %s", e->err.err);
break;
case PRI_EVENT_RESTART:
pri_message("Restart on channel %d\n", e->restart.channel);
case PRI_EVENT_RING:
pri_message("Calling number: %s (%s, %s)\n", e->ring.callingnum, pri_plan2str(e->ring.callingplan), pri_pres2str(e->ring.callingpres));
pri_message("Called number: %s (%s)\n", e->ring.callednum, pri_plan2str(e->ring.calledplan));
pri_message("Channel: %d (%s) Reference number: %d\n", e->ring.channel, e->ring.flexible ? "Flexible" : "Not Flexible", e->ring.cref);
break;
case PRI_EVENT_HANGUP:
pri_message("Hangup, reference number: %d, reason: %s\n", e->hangup.cref, pri_cause2str(e->hangup.cause));
break;
default:
pri_message("Don't know how to dump events of type %d\n", e->gen.e);
}
}
int pri_call(struct pri *pri, q931_call *c, int transmode, int channel, int exclusive,
int nonisdn, char *caller, int callerplan, char *callername, int callerpres, char *called,
int calledplan,int ulayer1)
{
if (!pri || !c)
return -1;
return q931_setup(pri, c, transmode, channel, exclusive, nonisdn, caller, callerplan, callername, callerpres, called, calledplan, ulayer1);
}
static void (*__pri_error)(char *stuff);
static void (*__pri_message)(char *stuff);
void pri_set_message(void (*func)(char *stuff))
{
__pri_message = func;
}
void pri_set_error(void (*func)(char *stuff))
{
__pri_error = func;
}
void pri_message(char *fmt, ...)
{
char tmp[1024];
va_list ap;
va_start(ap, fmt);
vsnprintf(tmp, sizeof(tmp), fmt, ap);
va_end(ap);
if (__pri_message)
__pri_message(tmp);
else
fprintf(stdout, tmp);
}
void pri_error(char *fmt, ...)
{
char tmp[1024];
va_list ap;
va_start(ap, fmt);
vsnprintf(tmp, sizeof(tmp), fmt, ap);
va_end(ap);
if (__pri_error)
__pri_error(tmp);
else
fprintf(stderr, tmp);
}
/* Set overlap mode */
void pri_set_overlapdial(struct pri *pri,int state)
{
pri->overlapdial = state;
}
int pri_fd(struct pri *pri)
{
return pri->fd;
}
void pri_dump_info(struct pri *pri)
{
#ifdef LIBPRI_COUNTERS
struct q921_frame *f;
int q921outstanding = 0;
#endif
if (!pri)
return;
/* Might be nice to format these a little better */
pri_message("Switchtype: %s\n", pri_switch2str(pri->switchtype));
pri_message("Type: %s\n", pri_node2str(pri->localtype));
#ifdef LIBPRI_COUNTERS
/* Remember that Q921 Counters include Q931 packets (and any retransmissions) */
pri_message("Q931 RX: %d\n", pri->q931_rxcount);
pri_message("Q931 TX: %d\n", pri->q931_txcount);
pri_message("Q921 RX: %d\n", pri->q921_rxcount);
pri_message("Q921 TX: %d\n", pri->q921_txcount);
f = pri->txqueue;
while (f) {
q921outstanding++;
f = f->next;
}
pri_message("Q921 Outstanding: %d\n", q921outstanding);
#endif
pri_message("Window Length: %d/%d\n", pri->windowlen, pri->window);
pri_message("Sentrej: %d\n", pri->sentrej);
pri_message("SolicitFbit: %d\n", pri->solicitfbit);
pri_message("Retrans: %d\n", pri->retrans);
pri_message("Busy: %d\n", pri->busy);
pri_message("Overlap Dial: %d\n", pri->overlapdial);
}