/* * libpri: An implementation of Primary Rate ISDN * * Written by Mark Spencer * * Copyright (C) 2001, Linux Support Services, Inc. * All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #ifndef _LIBPRI_H #define _LIBPRI_H /* Node types */ #define PRI_NETWORK 1 #define PRI_CPE 2 /* Debugging */ #define PRI_DEBUG_Q921_RAW (1 << 0) /* Show raw HDLC frames */ #define PRI_DEBUG_Q921_DUMP (1 << 1) /* Show each interpreted Q.921 frame */ #define PRI_DEBUG_Q921_STATE (1 << 2) /* Debug state machine changes */ #define PRI_DEBUG_CONFIG (1 << 3) /* Display error events on stdout */ #define PRI_DEBUG_Q931_DUMP (1 << 5) /* Show interpreted Q.931 frames */ #define PRI_DEBUG_Q931_STATE (1 << 6) /* Debug Q.931 state machine changes */ #define PRI_DEBUG_Q931_ANOMALY (1 << 7) /* Show unexpected events */ #define PRI_DEBUG_ALL (0xffff) /* Everything */ /* Switch types */ #define PRI_SWITCH_UNKNOWN 0 #define PRI_SWITCH_NI2 1 /* National ISDN 2 */ #define PRI_SWITCH_DMS100 2 /* DMS 100 */ #define PRI_SWITCH_LUCENT5E 3 /* Lucent 5E */ #define PRI_SWITCH_ATT4ESS 4 /* AT&T 4ESS */ #define PRI_SWITCH_EUROISDN_E1 5 /* Standard EuroISDN (CTR4, ETSI 300-102) */ #define PRI_SWITCH_EUROISDN_T1 6 /* T1 EuroISDN variant (ETSI 300-102) */ #define PRI_SWITCH_NI1 7 /* National ISDN 1 */ /* PRI D-Channel Events */ #define PRI_EVENT_DCHAN_UP 1 /* D-channel is up */ #define PRI_EVENT_DCHAN_DOWN 2 /* D-channel is down */ #define PRI_EVENT_RESTART 3 /* B-channel is restarted */ #define PRI_EVENT_CONFIG_ERR 4 /* Configuration Error Detected */ #define PRI_EVENT_RING 5 /* Incoming call */ #define PRI_EVENT_HANGUP 6 /* Call got hung up */ #define PRI_EVENT_RINGING 7 /* Call is ringing (alerting) */ #define PRI_EVENT_ANSWER 8 /* Call has been answered */ #define PRI_EVENT_HANGUP_ACK 9 /* Call hangup has been acknowledged */ #define PRI_EVENT_RESTART_ACK 10 /* Restart complete on a given channel */ #define PRI_EVENT_FACNAME 11 /* Caller*ID Name received on Facility */ #define PRI_EVENT_INFO_RECEIVED 12 /* Additional info (keypad) received */ #define PRI_EVENT_PROCEEDING 13 /* When we get CALL_PROCEEDING or PROGRESS */ #define PRI_EVENT_SETUP_ACK 14 /* When we get SETUP_ACKNOWLEDGE */ /* Simple states */ #define PRI_STATE_DOWN 0 #define PRI_STATE_UP 1 /* Numbering plan identifier */ #define PRI_NPI_UNKNOWN 0x0 #define PRI_NPI_E163_E164 0x1 #define PRI_NPI_X121 0x3 #define PRI_NPI_F69 0x4 #define PRI_NPI_NATIONAL 0x8 #define PRI_NPI_PRIVATE 0x9 #define PRI_NPI_RESERVED 0xF /* Type of number */ #define PRI_TON_UNKNOWN 0x0 #define PRI_TON_INTERNATIONAL 0x1 #define PRI_TON_NATIONAL 0x2 #define PRI_TON_NET_SPECIFIC 0x3 #define PRI_TON_SUBSCRIBER 0x4 #define PRI_TON_ABBREVIATED 0x6 #define PRI_TON_RESERVED 0x7 /* Redirection reasons */ #define PRI_REDIR_UNKNOWN 0x0 #define PRI_REDIR_FORWARD_ON_BUSY 0x1 #define PRI_REDIR_FORWARD_ON_NO_REPLY 0x2 #define PRI_REDIR_DEFLECTION 0x3 #define PRI_REDIR_DTE_OUT_OF_ORDER 0x9 #define PRI_REDIR_FORWARDED_BY_DTE 0xA #define PRI_REDIR_UNCONDITIONAL 0xF /* Dialing plan */ #define PRI_INTERNATIONAL_ISDN 0x11 #define PRI_NATIONAL_ISDN 0x21 #define PRI_LOCAL_ISDN 0x41 #define PRI_PRIVATE 0x49 #define PRI_UNKNOWN 0x0 /* Presentation */ #define PRES_ALLOWED_USER_NUMBER_NOT_SCREENED 0x00 #define PRES_ALLOWED_USER_NUMBER_PASSED_SCREEN 0x01 #define PRES_ALLOWED_USER_NUMBER_FAILED_SCREEN 0x02 #define PRES_ALLOWED_NETWORK_NUMBER 0x03 #define PRES_PROHIB_USER_NUMBER_NOT_SCREENED 0x20 #define PRES_PROHIB_USER_NUMBER_PASSED_SCREEN 0x21 #define PRES_PROHIB_USER_NUMBER_FAILED_SCREEN 0x22 #define PRES_PROHIB_NETWORK_NUMBER 0x23 #define PRES_NUMBER_NOT_AVAILABLE 0x43 /* Causes for disconnection */ #define PRI_CAUSE_UNALLOCATED 1 #define PRI_CAUSE_NO_ROUTE_TRANSIT_NET 2 #define PRI_CAUSE_NO_ROUTE_DESTINATION 3 #define PRI_CAUSE_CHANNEL_UNACCEPTABLE 6 #define PRI_CAUSE_CALL_AWARDED_DELIVERED 7 #define PRI_CAUSE_NORMAL_CLEARING 16 #define PRI_CAUSE_USER_BUSY 17 #define PRI_CAUSE_NO_USER_RESPONSE 18 #define PRI_CAUSE_NO_ANSWER 19 #define PRI_CAUSE_CALL_REJECTED 21 #define PRI_CAUSE_NUMBER_CHANGED 22 #define PRI_CAUSE_DESTINATION_OUT_OF_ORDER 27 #define PRI_CAUSE_INVALID_NUMBER_FORMAT 28 #define PRI_CAUSE_FACILITY_REJECTED 29 #define PRI_CAUSE_RESPONSE_TO_STATUS_ENQUIRY 30 #define PRI_CAUSE_NORMAL_UNSPECIFIED 31 #define PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION 34 #define PRI_CAUSE_NETWORK_OUT_OF_ORDER 38 #define PRI_CAUSE_NORMAL_TEMPORARY_FAILURE 41 #define PRI_CAUSE_SWITCH_CONGESTION 42 #define PRI_CAUSE_ACCESS_INFO_DISCARDED 43 #define PRI_CAUSE_REQUESTED_CHAN_UNAVAIL 44 #define PRI_CAUSE_PRE_EMPTED 45 #define PRI_CAUSE_FACILITY_NOT_SUBSCRIBED 50 #define PRI_CAUSE_OUTGOING_CALL_BARRED 52 #define PRI_CAUSE_INCOMING_CALL_BARRED 54 #define PRI_CAUSE_BEARERCAPABILITY_NOTAUTH 57 #define PRI_CAUSE_BEARERCAPABILITY_NOTAVAIL 58 #define PRI_CAUSE_BEARERCAPABILITY_NOTIMPL 65 #define PRI_CAUSE_CHAN_NOT_IMPLEMENTED 66 #define PRI_CAUSE_FACILITY_NOT_IMPLEMENTED 69 #define PRI_CAUSE_INVALID_CALL_REFERENCE 81 #define PRI_CAUSE_INCOMPATIBLE_DESTINATION 88 #define PRI_CAUSE_INVALID_MSG_UNSPECIFIED 95 #define PRI_CAUSE_MANDATORY_IE_MISSING 96 #define PRI_CAUSE_MESSAGE_TYPE_NONEXIST 97 #define PRI_CAUSE_WRONG_MESSAGE 98 #define PRI_CAUSE_IE_NONEXIST 99 #define PRI_CAUSE_INVALID_IE_CONTENTS 100 #define PRI_CAUSE_WRONG_CALL_STATE 101 #define PRI_CAUSE_RECOVERY_ON_TIMER_EXPIRE 102 #define PRI_CAUSE_MANDATORY_IE_LENGTH_ERROR 103 #define PRI_CAUSE_PROTOCOL_ERROR 111 #define PRI_CAUSE_INTERWORKING 127 /* Transmit capabilities */ #define PRI_TRANS_CAP_SPEECH 0x0 #define PRI_TRANS_CAP_DIGITAL 0x08 #define PRI_TRANS_CAP_RESTRICTED_DIGITAL 0x09 #define PRI_TRANS_CAP_3_1K_AUDIO 0x10 #define PRI_TRANS_CAP_7K_AUDIO 0x11 #define PRI_TRANS_CAP_VIDEO 0x18 #define PRI_LAYER_1_ITU_RATE_ADAPT 0x21 #define PRI_LAYER_1_ULAW 0x22 #define PRI_LAYER_1_ALAW 0x23 #define PRI_LAYER_1_G721 0x24 #define PRI_LAYER_1_G722_G725 0x25 #define PRI_LAYER_1_G7XX_384K 0x26 #define PRI_LAYER_1_NON_ITU_ADAPT 0x27 #define PRI_LAYER_1_V120_RATE_ADAPT 0x28 #define PRI_LAYER_1_X31_RATE_ADAPT 0x29 #define PRI_COPY_DIGITS_CALLED_NUMBER typedef struct q931_call q931_call; typedef struct pri_event_generic { /* Events with no additional information fall in this category */ int e; } pri_event_generic; typedef struct pri_event_error { int e; char err[256]; } pri_event_error; typedef struct pri_event_restart { int e; int channel; } pri_event_restart; typedef struct pri_event_ringing { int e; int channel; int cref; q931_call *call; } pri_event_ringing; typedef struct pri_event_answer { int e; int channel; int cref; q931_call *call; } pri_event_answer; typedef struct pri_event_facname { int e; char callingname[256]; char callingnum[256]; int channel; int cref; q931_call *call; } pri_event_facname; typedef struct pri_event_ring { int e; int channel; /* Channel requested */ int callingpres; /* Presentation of Calling CallerID */ int callingplan; /* Dialing plan of Calling entity */ char callingnum[256]; /* Calling number */ char callingname[256]; /* Calling name (if provided) */ int calledplan; /* Dialing plan of Called number */ char callednum[256]; /* Called number */ char redirectingnum[256]; /* Redirecting number */ char useruserinfo[256]; /* User->User info */ int flexible; /* Are we flexible with our channel selection? */ int cref; /* Call Reference Number */ int ctype; /* Call type (see PRI_TRANS_CAP_* */ int layer1; /* User layer 1 */ int complete; /* Have we seen "Complete" i.e. no more number? */ q931_call *call; /* Opaque call pointer */ } pri_event_ring; typedef struct pri_event_hangup { int e; int channel; /* Channel requested */ int cause; int cref; q931_call *call; /* Opaque call pointer */ } pri_event_hangup; typedef struct pri_event_restart_ack { int e; int channel; } pri_event_restart_ack; typedef struct pri_event_proceeding { int e; int channel; } pri_event_proceeding; typedef struct pri_event_setup_ack { int e; int channel; } pri_event_setup_ack; typedef union { int e; pri_event_generic gen; /* Generic view */ pri_event_restart restart; /* Restart view */ pri_event_error err; /* Error view */ pri_event_facname facname; /* Caller*ID Name on Facility */ pri_event_ring ring; /* Ring */ pri_event_hangup hangup; /* Hang up */ pri_event_ringing ringing; /* Ringing */ pri_event_ringing answer; /* Answer */ pri_event_restart_ack restartack; /* Restart Acknowledge */ pri_event_proceeding proceeding; /* Call proceeding & Progress */ pri_event_setup_ack setup_ack; /* SETUP_ACKNOWLEDGE structure */ } pri_event; struct pri; /* Create a D-channel on a given file descriptor. The file descriptor must be a channel operating in HDLC mode with FCS computed by the fd's driver. Also it must be NON-BLOCKING! Frames received on the fd should include FCS. Nodetype must be one of PRI_NETWORK or PRI_CPE. switchtype should be PRI_SWITCH_* */ extern struct pri *pri_new(int fd, int nodetype, int switchtype); /* Set debug parameters on PRI -- see above debug definitions */ extern void pri_set_debug(struct pri *pri, int debug); /* Run PRI on the given D-channel, taking care of any events that need to be handled. If block is set, it will block until an event occurs which needs to be handled */ extern pri_event *pri_dchannel_run(struct pri *pri, int block); /* Check for an outstanding event on the PRI */ pri_event *pri_check_event(struct pri *pri); /* Give a name to a given event ID */ extern char *pri_event2str(int id); /* Give a name toa node type */ extern char *pri_node2str(int id); /* Give a name to a switch type */ extern char *pri_switch2str(int id); /* Print an event */ extern void pri_dump_event(struct pri *pri, pri_event *e); /* Turn an event ID into a string */ extern char *pri_event2str(int e); /* Turn presentation into a string */ extern char *pri_pres2str(int pres); /* Turn numbering plan into a string */ extern char *pri_plan2str(int plan); /* Turn cause into a string */ extern char *pri_cause2str(int cause); /* Acknowledge a call and place it on the given channel. Set info to non-zero if there is in-band data available on the channel */ extern int pri_acknowledge(struct pri *pri, q931_call *call, int channel, int info); /* Send a digit in overlap mode */ extern int pri_information(struct pri *pri, q931_call *call, char digit); /* Answer the incomplete(call without called number) call on the given channel. Set non-isdn to non-zero if you are not connecting to ISDN equipment */ extern int pri_need_more_info(struct pri *pri, q931_call *call, int channel, int nonisdn); /* Answer the call on the given channel (ignored if you called acknowledge already). Set non-isdn to non-zero if you are not connecting to ISDN equipment */ extern int pri_answer(struct pri *pri, q931_call *call, int channel, int nonisdn); #if 0 /* deprecated routines, use pri_hangup */ /* Release/Reject a call */ extern int pri_release(struct pri *pri, q931_call *call, int cause); /* Hangup / Disconnect a call */ extern int pri_disconnect(struct pri *pri, q931_call *call, int cause); #endif #undef pri_release #undef pri_disconnect /* backwards compatibility for those who don't use asterisk with libpri */ #define pri_release(a,b,c) \ pri_hangup(a,b,c) #define pri_disconnect(a,b,c) \ pri_hangup(a,b,c) /* Hangup a call */ #define PRI_HANGUP extern int pri_hangup(struct pri *pri, q931_call *call, int cause); extern int pri_reset(struct pri *pri, int channel); /* Create a new call */ extern q931_call *pri_new_call(struct pri *pri); /* How long until you need to poll for a new event */ extern struct timeval *pri_schedule_next(struct pri *pri); /* Run any pending schedule events */ extern pri_event *pri_schedule_run(struct pri *pri); extern int pri_call(struct pri *pri, q931_call *c, int transmode, int channel, int exclusive, int nonisdn, char *caller, int callerplan, char *callername, int callerpres, char *called,int calledplan, int ulayer1); /* Override message and error stuff */ extern void pri_set_message(void (*__pri_error)(char *)); extern void pri_set_error(void (*__pri_error)(char *)); /* Set overlap mode */ #define PRI_SET_OVERLAPDIAL extern void pri_set_overlapdial(struct pri *pri,int state); #endif