/* * libpri: An implementation of Primary Rate ISDN * * Written by Mark Spencer * * Copyright (C) 2001, Linux Support Services, Inc. * All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #ifndef _LIBPRI_H #define _LIBPRI_H /* Node types */ #define PRI_NETWORK 1 #define PRI_CPE 2 /* Debugging */ #define PRI_DEBUG_Q921_RAW (1 << 0) /* Show raw HDLC frames */ #define PRI_DEBUG_Q921_DUMP (1 << 1) /* Show each interpreted Q.921 frame */ #define PRI_DEBUG_Q921_STATE (1 << 2) /* Debug state machine changes */ #define PRI_DEBUG_CONFIG (1 << 3) /* Display error events on stdout */ #define PRI_DEBUG_Q931_DUMP (1 << 5) /* Show interpreted Q.931 frames */ #define PRI_DEBUG_Q931_STATE (1 << 6) /* Debug Q.931 state machine changes */ #define PRI_DEBUG_Q931_ANOMALY (1 << 7) /* Show unexpected events */ #define PRI_DEBUG_APDU (1 << 8) /* Debug of APDU components such as ROSE */ #define PRI_DEBUG_AOC (1 << 9) /* Debug of Advice of Charge ROSE Messages */ #define PRI_DEBUG_ALL (0xffff) /* Everything */ /* Switch types */ #define PRI_SWITCH_UNKNOWN 0 #define PRI_SWITCH_NI2 1 /* National ISDN 2 */ #define PRI_SWITCH_DMS100 2 /* DMS 100 */ #define PRI_SWITCH_LUCENT5E 3 /* Lucent 5E */ #define PRI_SWITCH_ATT4ESS 4 /* AT&T 4ESS */ #define PRI_SWITCH_EUROISDN_E1 5 /* Standard EuroISDN (CTR4, ETSI 300-102) */ #define PRI_SWITCH_EUROISDN_T1 6 /* T1 EuroISDN variant (ETSI 300-102) */ #define PRI_SWITCH_NI1 7 /* National ISDN 1 */ #define PRI_SWITCH_GR303_EOC 8 /* GR-303 Embedded Operations Channel */ #define PRI_SWITCH_GR303_TMC 9 /* GR-303 Timeslot Management Channel */ #define PRI_SWITCH_QSIG 10 /* QSIG Switch */ /* Switchtypes 11 - 20 are reserved for internal use */ /* PRI D-Channel Events */ #define PRI_EVENT_DCHAN_UP 1 /* D-channel is up */ #define PRI_EVENT_DCHAN_DOWN 2 /* D-channel is down */ #define PRI_EVENT_RESTART 3 /* B-channel is restarted */ #define PRI_EVENT_CONFIG_ERR 4 /* Configuration Error Detected */ #define PRI_EVENT_RING 5 /* Incoming call */ #define PRI_EVENT_HANGUP 6 /* Call got hung up */ #define PRI_EVENT_RINGING 7 /* Call is ringing (alerting) */ #define PRI_EVENT_ANSWER 8 /* Call has been answered */ #define PRI_EVENT_HANGUP_ACK 9 /* Call hangup has been acknowledged */ #define PRI_EVENT_RESTART_ACK 10 /* Restart complete on a given channel */ #define PRI_EVENT_FACNAME 11 /* Caller*ID Name received on Facility */ #define PRI_EVENT_INFO_RECEIVED 12 /* Additional info (keypad) received */ #define PRI_EVENT_PROCEEDING 13 /* When we get CALL_PROCEEDING or PROGRESS */ #define PRI_EVENT_SETUP_ACK 14 /* When we get SETUP_ACKNOWLEDGE */ #define PRI_EVENT_HANGUP_REQ 15 /* Requesting the higher layer to hangup */ #define PRI_EVENT_NOTIFY 16 /* Notification received */ #define PRI_EVENT_PROGRESS 17 /* When we get CALL_PROCEEDING or PROGRESS */ #define PRI_EVENT_KEYPAD_DIGIT 18 /* When we receive during ACTIVE state */ /* Simple states */ #define PRI_STATE_DOWN 0 #define PRI_STATE_UP 1 #define PRI_PROGRESS_MASK /* Progress indicator values */ #define PRI_PROG_CALL_NOT_E2E_ISDN (1 << 0) #define PRI_PROG_CALLED_NOT_ISDN (1 << 1) #define PRI_PROG_CALLER_NOT_ISDN (1 << 2) #define PRI_PROG_INBAND_AVAILABLE (1 << 3) #define PRI_PROG_DELAY_AT_INTERF (1 << 4) #define PRI_PROG_INTERWORKING_WITH_PUBLIC (1 << 5) #define PRI_PROG_INTERWORKING_NO_RELEASE (1 << 6) #define PRI_PROG_INTERWORKING_NO_RELEASE_PRE_ANSWER (1 << 7) #define PRI_PROG_INTERWORKING_NO_RELEASE_POST_ANSWER (1 << 8) #define PRI_PROG_CALLER_RETURNED_TO_ISDN (1 << 9) /* Numbering plan identifier */ #define PRI_NPI_UNKNOWN 0x0 #define PRI_NPI_E163_E164 0x1 #define PRI_NPI_X121 0x3 #define PRI_NPI_F69 0x4 #define PRI_NPI_NATIONAL 0x8 #define PRI_NPI_PRIVATE 0x9 #define PRI_NPI_RESERVED 0xF /* Type of number */ #define PRI_TON_UNKNOWN 0x0 #define PRI_TON_INTERNATIONAL 0x1 #define PRI_TON_NATIONAL 0x2 #define PRI_TON_NET_SPECIFIC 0x3 #define PRI_TON_SUBSCRIBER 0x4 #define PRI_TON_ABBREVIATED 0x6 #define PRI_TON_RESERVED 0x7 /* Redirection reasons */ #define PRI_REDIR_UNKNOWN 0x0 #define PRI_REDIR_FORWARD_ON_BUSY 0x1 #define PRI_REDIR_FORWARD_ON_NO_REPLY 0x2 #define PRI_REDIR_DEFLECTION 0x3 #define PRI_REDIR_DTE_OUT_OF_ORDER 0x9 #define PRI_REDIR_FORWARDED_BY_DTE 0xA #define PRI_REDIR_UNCONDITIONAL 0xF /* Dialing plan */ #define PRI_INTERNATIONAL_ISDN 0x11 #define PRI_NATIONAL_ISDN 0x21 #define PRI_LOCAL_ISDN 0x41 #define PRI_PRIVATE 0x49 #define PRI_UNKNOWN 0x0 /* Presentation */ #define PRES_ALLOWED_USER_NUMBER_NOT_SCREENED 0x00 #define PRES_ALLOWED_USER_NUMBER_PASSED_SCREEN 0x01 #define PRES_ALLOWED_USER_NUMBER_FAILED_SCREEN 0x02 #define PRES_ALLOWED_NETWORK_NUMBER 0x03 #define PRES_PROHIB_USER_NUMBER_NOT_SCREENED 0x20 #define PRES_PROHIB_USER_NUMBER_PASSED_SCREEN 0x21 #define PRES_PROHIB_USER_NUMBER_FAILED_SCREEN 0x22 #define PRES_PROHIB_NETWORK_NUMBER 0x23 #define PRES_NUMBER_NOT_AVAILABLE 0x43 /* Causes for disconnection */ #define PRI_CAUSE_UNALLOCATED 1 #define PRI_CAUSE_NO_ROUTE_TRANSIT_NET 2 #define PRI_CAUSE_NO_ROUTE_DESTINATION 3 #define PRI_CAUSE_CHANNEL_UNACCEPTABLE 6 #define PRI_CAUSE_CALL_AWARDED_DELIVERED 7 #define PRI_CAUSE_NORMAL_CLEARING 16 #define PRI_CAUSE_USER_BUSY 17 #define PRI_CAUSE_NO_USER_RESPONSE 18 #define PRI_CAUSE_NO_ANSWER 19 #define PRI_CAUSE_CALL_REJECTED 21 #define PRI_CAUSE_NUMBER_CHANGED 22 #define PRI_CAUSE_DESTINATION_OUT_OF_ORDER 27 #define PRI_CAUSE_INVALID_NUMBER_FORMAT 28 #define PRI_CAUSE_FACILITY_REJECTED 29 #define PRI_CAUSE_RESPONSE_TO_STATUS_ENQUIRY 30 #define PRI_CAUSE_NORMAL_UNSPECIFIED 31 #define PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION 34 #define PRI_CAUSE_NETWORK_OUT_OF_ORDER 38 #define PRI_CAUSE_NORMAL_TEMPORARY_FAILURE 41 #define PRI_CAUSE_SWITCH_CONGESTION 42 #define PRI_CAUSE_ACCESS_INFO_DISCARDED 43 #define PRI_CAUSE_REQUESTED_CHAN_UNAVAIL 44 #define PRI_CAUSE_PRE_EMPTED 45 #define PRI_CAUSE_FACILITY_NOT_SUBSCRIBED 50 #define PRI_CAUSE_OUTGOING_CALL_BARRED 52 #define PRI_CAUSE_INCOMING_CALL_BARRED 54 #define PRI_CAUSE_BEARERCAPABILITY_NOTAUTH 57 #define PRI_CAUSE_BEARERCAPABILITY_NOTAVAIL 58 #define PRI_CAUSE_BEARERCAPABILITY_NOTIMPL 65 #define PRI_CAUSE_CHAN_NOT_IMPLEMENTED 66 #define PRI_CAUSE_FACILITY_NOT_IMPLEMENTED 69 #define PRI_CAUSE_INVALID_CALL_REFERENCE 81 #define PRI_CAUSE_INCOMPATIBLE_DESTINATION 88 #define PRI_CAUSE_INVALID_MSG_UNSPECIFIED 95 #define PRI_CAUSE_MANDATORY_IE_MISSING 96 #define PRI_CAUSE_MESSAGE_TYPE_NONEXIST 97 #define PRI_CAUSE_WRONG_MESSAGE 98 #define PRI_CAUSE_IE_NONEXIST 99 #define PRI_CAUSE_INVALID_IE_CONTENTS 100 #define PRI_CAUSE_WRONG_CALL_STATE 101 #define PRI_CAUSE_RECOVERY_ON_TIMER_EXPIRE 102 #define PRI_CAUSE_MANDATORY_IE_LENGTH_ERROR 103 #define PRI_CAUSE_PROTOCOL_ERROR 111 #define PRI_CAUSE_INTERWORKING 127 /* Transmit capabilities */ #define PRI_TRANS_CAP_SPEECH 0x0 #define PRI_TRANS_CAP_DIGITAL 0x08 #define PRI_TRANS_CAP_RESTRICTED_DIGITAL 0x09 #define PRI_TRANS_CAP_3_1K_AUDIO 0x10 #define PRI_TRANS_CAP_7K_AUDIO 0x11 /* Depriciated ITU Q.931 (05/1998)*/ #define PRI_TRANS_CAP_DIGITAL_W_TONES 0x11 #define PRI_TRANS_CAP_VIDEO 0x18 #define PRI_LAYER_1_ITU_RATE_ADAPT 0x21 #define PRI_LAYER_1_ULAW 0x22 #define PRI_LAYER_1_ALAW 0x23 #define PRI_LAYER_1_G721 0x24 #define PRI_LAYER_1_G722_G725 0x25 #define PRI_LAYER_1_G7XX_384K 0x26 #define PRI_LAYER_1_NON_ITU_ADAPT 0x27 #define PRI_LAYER_1_V120_RATE_ADAPT 0x28 #define PRI_LAYER_1_X31_RATE_ADAPT 0x29 /* Notifications */ #define PRI_NOTIFY_USER_SUSPENDED 0x00 /* User suspended */ #define PRI_NOTIFY_USER_RESUMED 0x01 /* User resumed */ #define PRI_NOTIFY_BEARER_CHANGE 0x02 /* Bearer service change (DSS1) */ #define PRI_NOTIFY_ASN1_COMPONENT 0x03 /* ASN.1 encoded component (DSS1) */ #define PRI_NOTIFY_COMPLETION_DELAY 0x04 /* Call completion delay */ #define PRI_NOTIFY_CONF_ESTABLISHED 0x42 /* Conference established */ #define PRI_NOTIFY_CONF_DISCONNECTED 0x43 /* Conference disconnected */ #define PRI_NOTIFY_CONF_PARTY_ADDED 0x44 /* Other party added */ #define PRI_NOTIFY_CONF_ISOLATED 0x45 /* Isolated */ #define PRI_NOTIFY_CONF_REATTACHED 0x46 /* Reattached */ #define PRI_NOTIFY_CONF_OTHER_ISOLATED 0x47 /* Other party isolated */ #define PRI_NOTIFY_CONF_OTHER_REATTACHED 0x48 /* Other party reattached */ #define PRI_NOTIFY_CONF_OTHER_SPLIT 0x49 /* Other party split */ #define PRI_NOTIFY_CONF_OTHER_DISCONNECTED 0x4a /* Other party disconnected */ #define PRI_NOTIFY_CONF_FLOATING 0x4b /* Conference floating */ #define PRI_NOTIFY_WAITING_CALL 0x60 /* Call is waiting call */ #define PRI_NOTIFY_DIVERSION_ACTIVATED 0x68 /* Diversion activated (DSS1) */ #define PRI_NOTIFY_TRANSFER_ALERTING 0x69 /* Call transfer, alerting */ #define PRI_NOTIFY_TRANSFER_ACTIVE 0x6a /* Call transfer, active */ #define PRI_NOTIFY_REMOTE_HOLD 0x79 /* Remote hold */ #define PRI_NOTIFY_REMOTE_RETRIEVAL 0x7a /* Remote retrieval */ #define PRI_NOTIFY_CALL_DIVERTING 0x7b /* Call is diverting */ #define PRI_COPY_DIGITS_CALLED_NUMBER /* Network Specific Facilities (AT&T) */ #define PRI_NSF_NONE -1 #define PRI_NSF_SID_PREFERRED 0xB1 #define PRI_NSF_ANI_PREFERRED 0xB2 #define PRI_NSF_SID_ONLY 0xB3 #define PRI_NSF_ANI_ONLY 0xB4 #define PRI_NSF_CALL_ASSOC_TSC 0xB9 #define PRI_NSF_NOTIF_CATSC_CLEARING 0xBA #define PRI_NSF_OPERATOR 0xB5 #define PRI_NSF_PCCO 0xB6 #define PRI_NSF_SDN 0xE1 #define PRI_NSF_TOLL_FREE_MEGACOM 0xE2 #define PRI_NSF_MEGACOM 0xE3 #define PRI_NSF_ACCUNET 0xE6 #define PRI_NSF_LONG_DISTANCE_SERVICE 0xE7 #define PRI_NSF_INTERNATIONAL_TOLL_FREE 0xE8 #define PRI_NSF_ATT_MULTIQUEST 0xF0 #define PRI_NSF_CALL_REDIRECTION_SERVICE 0xF7 typedef struct q931_call q931_call; typedef struct pri_event_generic { /* Events with no additional information fall in this category */ int e; } pri_event_generic; typedef struct pri_event_error { int e; char err[256]; } pri_event_error; typedef struct pri_event_restart { int e; int channel; } pri_event_restart; typedef struct pri_event_ringing { int e; int channel; int cref; int progress; int progressmask; q931_call *call; } pri_event_ringing; typedef struct pri_event_answer { int e; int channel; int cref; int progress; int progressmask; q931_call *call; } pri_event_answer; typedef struct pri_event_facname { int e; char callingname[256]; char callingnum[256]; int channel; int cref; q931_call *call; } pri_event_facname; typedef struct pri_event_ring { int e; int channel; /* Channel requested */ int callingpres; /* Presentation of Calling CallerID */ int callingplan; /* Dialing plan of Calling entity */ char callingnum[256]; /* Calling number */ char callingname[256]; /* Calling name (if provided) */ int calledplan; /* Dialing plan of Called number */ int ani2; /* ANI II */ char callednum[256]; /* Called number */ char redirectingnum[256]; /* Redirecting number */ int redirectingreason; /* Reason for redirect */ char useruserinfo[256]; /* User->User info */ int flexible; /* Are we flexible with our channel selection? */ int cref; /* Call Reference Number */ int ctype; /* Call type (see PRI_TRANS_CAP_* */ int layer1; /* User layer 1 */ int complete; /* Have we seen "Complete" i.e. no more number? */ q931_call *call; /* Opaque call pointer */ char callingsubaddr[256]; /* Calling parties subaddress */ int progress; int progressmask; } pri_event_ring; typedef struct pri_event_hangup { int e; int channel; /* Channel requested */ int cause; int cref; q931_call *call; /* Opaque call pointer */ long aoc_units; /* Advise of Charge number of charged units */ } pri_event_hangup; typedef struct pri_event_restart_ack { int e; int channel; } pri_event_restart_ack; typedef struct pri_event_proceeding { int e; int channel; int cref; int progress; int progressmask; q931_call *call; } pri_event_proceeding; typedef struct pri_event_setup_ack { int e; int channel; } pri_event_setup_ack; typedef struct pri_event_notify { int e; int channel; int info; } pri_event_notify; typedef struct pri_event_keypad_digit { int e; int channel; q931_call *call; char digits[64]; } pri_event_keypad_digit; typedef union { int e; pri_event_generic gen; /* Generic view */ pri_event_restart restart; /* Restart view */ pri_event_error err; /* Error view */ pri_event_facname facname; /* Caller*ID Name on Facility */ pri_event_ring ring; /* Ring */ pri_event_hangup hangup; /* Hang up */ pri_event_ringing ringing; /* Ringing */ pri_event_ringing answer; /* Answer */ pri_event_restart_ack restartack; /* Restart Acknowledge */ pri_event_proceeding proceeding; /* Call proceeding & Progress */ pri_event_setup_ack setup_ack; /* SETUP_ACKNOWLEDGE structure */ pri_event_notify notify; /* Notification */ pri_event_keypad_digit digit; /* Digits that come during a call */ } pri_event; struct pri; struct pri_sr; #define PRI_IO_FUNCS /* Type declaration for callbacks to read or write a HDLC frame as below */ typedef int (*pri_io_cb)(struct pri *pri, void *buf, int buflen); /* Create a D-channel on a given file descriptor. The file descriptor must be a channel operating in HDLC mode with FCS computed by the fd's driver. Also it must be NON-BLOCKING! Frames received on the fd should include FCS. Nodetype must be one of PRI_NETWORK or PRI_CPE. switchtype should be PRI_SWITCH_* */ extern struct pri *pri_new(int fd, int nodetype, int switchtype); /* Create D-channel just as above with user defined I/O callbacks and data */ extern struct pri *pri_new_cb(int fd, int nodetype, int switchtype, pri_io_cb io_read, pri_io_cb io_write, void *userdata); /* Retrieve the user data associated with the D channel */ extern void *pri_get_userdata(struct pri *pri); /* Set the user data associated with the D channel */ extern void pri_set_userdata(struct pri *pri, void *userdata); /* Set Network Specific Facility for PRI */ extern void pri_set_nsf(struct pri *pri, int nsf); /* Set debug parameters on PRI -- see above debug definitions */ extern void pri_set_debug(struct pri *pri, int debug); /* Run PRI on the given D-channel, taking care of any events that need to be handled. If block is set, it will block until an event occurs which needs to be handled */ extern pri_event *pri_dchannel_run(struct pri *pri, int block); /* Check for an outstanding event on the PRI */ pri_event *pri_check_event(struct pri *pri); /* Give a name to a given event ID */ extern char *pri_event2str(int id); /* Give a name to a node type */ extern char *pri_node2str(int id); /* Give a name to a switch type */ extern char *pri_switch2str(int id); /* Print an event */ extern void pri_dump_event(struct pri *pri, pri_event *e); /* Turn presentation into a string */ extern char *pri_pres2str(int pres); /* Turn numbering plan into a string */ extern char *pri_plan2str(int plan); /* Turn cause into a string */ extern char *pri_cause2str(int cause); /* Acknowledge a call and place it on the given channel. Set info to non-zero if there is in-band data available on the channel */ extern int pri_acknowledge(struct pri *pri, q931_call *call, int channel, int info); /* Send a digit in overlap mode */ extern int pri_information(struct pri *pri, q931_call *call, char digit); /* Answer the incomplete(call without called number) call on the given channel. Set non-isdn to non-zero if you are not connecting to ISDN equipment */ extern int pri_need_more_info(struct pri *pri, q931_call *call, int channel, int nonisdn); /* Answer the call on the given channel (ignored if you called acknowledge already). Set non-isdn to non-zero if you are not connecting to ISDN equipment */ extern int pri_answer(struct pri *pri, q931_call *call, int channel, int nonisdn); /* Set CRV reference for GR-303 calls */ #undef pri_release #undef pri_disconnect /* backwards compatibility for those who don't use asterisk with libpri */ #define pri_release(a,b,c) \ pri_hangup(a,b,c) #define pri_disconnect(a,b,c) \ pri_hangup(a,b,c) /* Hangup a call */ #define PRI_HANGUP extern int pri_hangup(struct pri *pri, q931_call *call, int cause); #define PRI_DESTROYCALL extern void pri_destroycall(struct pri *pri, q931_call *call); extern int pri_reset(struct pri *pri, int channel); /* Create a new call */ extern q931_call *pri_new_call(struct pri *pri); /* Retrieve CRV reference for GR-303 calls. Returns >0 on success. */ extern int pri_get_crv(struct pri *pri, q931_call *call, int *callmode); /* Retrieve CRV reference for GR-303 calls. CRV must be >0, call mode should be 0 */ extern int pri_set_crv(struct pri *pri, q931_call *call, int crv, int callmode); /* How long until you need to poll for a new event */ extern struct timeval *pri_schedule_next(struct pri *pri); /* Run any pending schedule events */ extern pri_event *pri_schedule_run(struct pri *pri); extern int pri_call(struct pri *pri, q931_call *c, int transmode, int channel, int exclusive, int nonisdn, char *caller, int callerplan, char *callername, int callerpres, char *called,int calledplan, int ulayer1); extern struct pri_sr *pri_sr_new(void); extern void pri_sr_free(struct pri_sr *sr); extern int pri_sr_set_channel(struct pri_sr *sr, int channel, int exclusive, int nonisdn); extern int pri_sr_set_bearer(struct pri_sr *sr, int transmode, int userl1); extern int pri_sr_set_called(struct pri_sr *sr, char *called, int calledplan, int complete); extern int pri_sr_set_caller(struct pri_sr *sr, char *caller, char *callername, int callerplan, int callerpres); extern int pri_sr_set_redirecting(struct pri_sr *sr, char *num, int plan, int pres, int reason); extern int pri_setup(struct pri *pri, q931_call *call, struct pri_sr *req); /* Set a call has a call indpendent signalling connection (i.e. no bchan) */ extern int pri_sr_set_connection_call_independent(struct pri_sr *req); /* Send an MWI indication to a remote location. If activate is non zero, activates, if zero, decativates */ extern int pri_mwi_activate(struct pri *pri, q931_call *c, char *caller, int callerplan, char *callername, int callerpres, char *called, int calledplan); /* Send an MWI deactivate request to a remote location */ extern int pri_mwi_deactivate(struct pri *pri, q931_call *c, char *caller, int callerplan, char *callername, int callerpres, char *called, int calledplan); #define PRI_2BCT /* Attempt to pass the channels back to the NET side if compatable and * suscribed. Sometimes called 2 bchannel transfer (2BCT) */ int pri_channel_bridge(q931_call *call1, q931_call *call2); /* Override message and error stuff */ extern void pri_set_message(void (*__pri_error)(char *)); extern void pri_set_error(void (*__pri_error)(char *)); /* Set overlap mode */ #define PRI_SET_OVERLAPDIAL extern void pri_set_overlapdial(struct pri *pri,int state); #define PRI_DUMP_INFO_STR extern char *pri_dump_info_str(struct pri *pri); /* Get file descriptor */ extern int pri_fd(struct pri *pri); #define PRI_PROGRESS /* Send call proceeding */ extern int pri_progress(struct pri *pri, q931_call *c, int channel, int info); #define PRI_PROCEEDING_FULL /* Send call proceeding */ extern int pri_proceeding(struct pri *pri, q931_call *c, int channel, int info); /* Enslave a PRI to another, so they share the same call list (and maybe some timers) */ extern void pri_enslave(struct pri *master, struct pri *slave); #define PRI_GR303_SUPPORT #define PRI_ENSLAVE_SUPPORT #define PRI_SETUP_CALL #define PRI_RECEIVE_SUBADDR #define PRI_REDIRECTING_REASON #define PRI_AOC_UNITS /* Send notification */ extern int pri_notify(struct pri *pri, q931_call *c, int channel, int info); /* Get/Set PRI Timers */ #define PRI_GETSET_TIMERS extern int pri_set_timer(struct pri *pri, int timer, int value); extern int pri_get_timer(struct pri *pri, int timer); extern int pri_timer2idx(char *timer); #define PRI_MAX_TIMERS 32 #define PRI_TIMER_N200 0 /* Maximum numer of q921 retransmissions */ #define PRI_TIMER_N201 1 /* Maximum numer of octets in an information field */ #define PRI_TIMER_N202 2 /* Maximum numer of transmissions of the TEI identity request message */ #define PRI_TIMER_K 3 /* Maximum number of outstanding I-frames */ #define PRI_TIMER_T200 4 /* time between SABME's */ #define PRI_TIMER_T201 5 /* minimum time between retransmissions of the TEI Identity check messages */ #define PRI_TIMER_T202 6 /* minimum time between transmission of TEI Identity request messages */ #define PRI_TIMER_T203 7 /* maxiumum time without exchanging packets */ #define PRI_TIMER_T300 8 #define PRI_TIMER_T301 9 /* maximum time to respond to an ALERT */ #define PRI_TIMER_T302 10 #define PRI_TIMER_T303 11 /* maximum time to wait after sending a SETUP without a response */ #define PRI_TIMER_T304 12 #define PRI_TIMER_T305 13 #define PRI_TIMER_T306 14 #define PRI_TIMER_T307 15 #define PRI_TIMER_T308 16 #define PRI_TIMER_T309 17 #define PRI_TIMER_T310 18 /* maximum time between receiving a CALLPROCEEDING and receiving a ALERT/CONNECT/DISCONNECT/PROGRESS */ #define PRI_TIMER_T313 19 #define PRI_TIMER_T314 20 #define PRI_TIMER_T316 21 /* maximum time between transmitting a RESTART and receiving a RESTART ACK */ #define PRI_TIMER_T317 22 #define PRI_TIMER_T318 23 #define PRI_TIMER_T319 24 #define PRI_TIMER_T320 25 #define PRI_TIMER_T321 26 #define PRI_TIMER_T322 27 #endif