/* * libpri: An implementation of Primary Rate ISDN * * Written by Mark Spencer * * Copyright (C) 2001, Digium, Inc. * All Rights Reserved. */ /* * See http://www.asterisk.org for more information about * the Asterisk project. Please do not directly contact * any of the maintainers of this project for assistance; * the project provides a web site, mailing lists and IRC * channels for your use. * * This program is free software, distributed under the terms of * the GNU General Public License Version 2 as published by the * Free Software Foundation. See the LICENSE file included with * this program for more details. * * In addition, when this program is distributed with Asterisk in * any form that would qualify as a 'combined work' or as a * 'derivative work' (but not mere aggregation), you can redistribute * and/or modify the combination under the terms of the license * provided with that copy of Asterisk, instead of the license * terms granted here. */ /* * NOTE: * All new global identifiers that are added to this file MUST be * prefixed with PRI_ or pri_ to indicate that they are part of this * library and to reduce potential naming conflicts. */ #ifndef _LIBPRI_H #define _LIBPRI_H /* Node types */ #define PRI_NETWORK 1 #define PRI_CPE 2 /* Debugging */ #define PRI_DEBUG_Q921_RAW (1 << 0) /* Show raw HDLC frames */ #define PRI_DEBUG_Q921_DUMP (1 << 1) /* Show each interpreted Q.921 frame */ #define PRI_DEBUG_Q921_STATE (1 << 2) /* Debug state machine changes */ #define PRI_DEBUG_CONFIG (1 << 3) /* Display error events on stdout */ #define PRI_DEBUG_Q931_DUMP (1 << 5) /* Show interpreted Q.931 frames */ #define PRI_DEBUG_Q931_STATE (1 << 6) /* Debug Q.931 state machine changes */ #define PRI_DEBUG_Q931_ANOMALY (1 << 7) /* Show unexpected events */ #define PRI_DEBUG_APDU (1 << 8) /* Debug of APDU components such as ROSE */ #define PRI_DEBUG_AOC (1 << 9) /* Debug of Advice of Charge ROSE Messages */ #define PRI_DEBUG_CC (1 << 10) /* Debug call-completion. */ #define PRI_DEBUG_ALL (0xffff) /* Everything */ /* Switch types */ #define PRI_SWITCH_UNKNOWN 0 #define PRI_SWITCH_NI2 1 /* National ISDN 2 */ #define PRI_SWITCH_DMS100 2 /* DMS 100 */ #define PRI_SWITCH_LUCENT5E 3 /* Lucent 5E */ #define PRI_SWITCH_ATT4ESS 4 /* AT&T 4ESS */ #define PRI_SWITCH_EUROISDN_E1 5 /* Standard EuroISDN (CTR4, ETSI 300-102) */ #define PRI_SWITCH_EUROISDN_T1 6 /* T1 EuroISDN variant (ETSI 300-102) */ #define PRI_SWITCH_NI1 7 /* National ISDN 1 */ #define PRI_SWITCH_GR303_EOC 8 /* GR-303 Embedded Operations Channel */ #define PRI_SWITCH_GR303_TMC 9 /* GR-303 Timeslot Management Channel */ #define PRI_SWITCH_QSIG 10 /* QSIG Switch */ /* Switchtypes 11 - 20 are reserved for internal use */ /* PRI D-Channel Events */ #define PRI_EVENT_DCHAN_UP 1 /* D-channel is up */ #define PRI_EVENT_DCHAN_DOWN 2 /* D-channel is down */ #define PRI_EVENT_RESTART 3 /* B-channel is restarted */ #define PRI_EVENT_CONFIG_ERR 4 /* Configuration Error Detected */ #define PRI_EVENT_RING 5 /* Incoming call (SETUP) */ #define PRI_EVENT_HANGUP 6 /* Call got hung up (RELEASE/RELEASE_COMPLETE/other) */ #define PRI_EVENT_RINGING 7 /* Call is ringing (ALERTING) */ #define PRI_EVENT_ANSWER 8 /* Call has been answered (CONNECT) */ #define PRI_EVENT_HANGUP_ACK 9 /* Call hangup has been acknowledged */ #define PRI_EVENT_RESTART_ACK 10 /* Restart complete on a given channel (RESTART_ACKNOWLEDGE) */ #define PRI_EVENT_FACNAME 11 /* Caller*ID Name received on Facility (DEPRECATED) */ #define PRI_EVENT_FACILITY 11 /* Facility received (FACILITY) */ #define PRI_EVENT_INFO_RECEIVED 12 /* Additional info (digits) received (INFORMATION) */ #define PRI_EVENT_PROCEEDING 13 /* When we get CALL_PROCEEDING */ #define PRI_EVENT_SETUP_ACK 14 /* When we get SETUP_ACKNOWLEDGE */ #define PRI_EVENT_HANGUP_REQ 15 /* Requesting the higher layer to hangup (DISCONNECT) */ #define PRI_EVENT_NOTIFY 16 /* Notification received (NOTIFY) */ #define PRI_EVENT_PROGRESS 17 /* When we get PROGRESS */ #define PRI_EVENT_KEYPAD_DIGIT 18 /* When we receive during ACTIVE state (INFORMATION) */ #define PRI_EVENT_SERVICE 19 /* SERVICE maintenance message */ #define PRI_EVENT_SERVICE_ACK 20 /* SERVICE maintenance acknowledgement message */ #define PRI_EVENT_HOLD 21 /* HOLD request received */ #define PRI_EVENT_HOLD_ACK 22 /* HOLD_ACKNOWLEDGE received */ #define PRI_EVENT_HOLD_REJ 23 /* HOLD_REJECT received */ #define PRI_EVENT_RETRIEVE 24 /* RETRIEVE request received */ #define PRI_EVENT_RETRIEVE_ACK 25 /* RETRIEVE_ACKNOWLEDGE received */ #define PRI_EVENT_RETRIEVE_REJ 26 /* RETRIEVE_REJECT received */ #define PRI_EVENT_CONNECT_ACK 27 /* CONNECT_ACKNOWLEDGE received */ /* Simple states */ #define PRI_STATE_DOWN 0 #define PRI_STATE_UP 1 #define PRI_PROGRESS_MASK /* Progress indicator values */ #define PRI_PROG_CALL_NOT_E2E_ISDN (1 << 0) #define PRI_PROG_CALLED_NOT_ISDN (1 << 1) #define PRI_PROG_CALLER_NOT_ISDN (1 << 2) #define PRI_PROG_INBAND_AVAILABLE (1 << 3) #define PRI_PROG_DELAY_AT_INTERF (1 << 4) #define PRI_PROG_INTERWORKING_WITH_PUBLIC (1 << 5) #define PRI_PROG_INTERWORKING_NO_RELEASE (1 << 6) #define PRI_PROG_INTERWORKING_NO_RELEASE_PRE_ANSWER (1 << 7) #define PRI_PROG_INTERWORKING_NO_RELEASE_POST_ANSWER (1 << 8) #define PRI_PROG_CALLER_RETURNED_TO_ISDN (1 << 9) /* Numbering plan identifier */ #define PRI_NPI_UNKNOWN 0x0 /*!< Unknown numbering plan */ #define PRI_NPI_E163_E164 0x1 /*!< ISDN/telephony numbering plan (public) */ #define PRI_NPI_X121 0x3 /*!< Data numbering plan */ #define PRI_NPI_F69 0x4 /*!< Telex numbering plan */ #define PRI_NPI_NATIONAL 0x8 /*!< National standard numbering plan */ #define PRI_NPI_PRIVATE 0x9 /*!< Private numbering plan */ #define PRI_NPI_RESERVED 0xF /*!< Reserved for extension */ /* Type of number */ #define PRI_TON_UNKNOWN 0x0 #define PRI_TON_INTERNATIONAL 0x1 #define PRI_TON_NATIONAL 0x2 #define PRI_TON_NET_SPECIFIC 0x3 #define PRI_TON_SUBSCRIBER 0x4 #define PRI_TON_ABBREVIATED 0x6 #define PRI_TON_RESERVED 0x7 /* Redirection reasons */ #define PRI_REDIR_UNKNOWN 0x0 #define PRI_REDIR_FORWARD_ON_BUSY 0x1 #define PRI_REDIR_FORWARD_ON_NO_REPLY 0x2 #define PRI_REDIR_DEFLECTION 0x3 #define PRI_REDIR_DTE_OUT_OF_ORDER 0x9 #define PRI_REDIR_FORWARDED_BY_DTE 0xA #define PRI_REDIR_UNCONDITIONAL 0xF /* Dialing plan */ #define PRI_INTERNATIONAL_ISDN 0x11 #define PRI_NATIONAL_ISDN 0x21 #define PRI_LOCAL_ISDN 0x41 #define PRI_PRIVATE 0x49 #define PRI_UNKNOWN 0x0 /* Presentation */ #define PRI_PRES_NUMBER_TYPE 0x03 #define PRI_PRES_USER_NUMBER_UNSCREENED 0x00 #define PRI_PRES_USER_NUMBER_PASSED_SCREEN 0x01 #define PRI_PRES_USER_NUMBER_FAILED_SCREEN 0x02 #define PRI_PRES_NETWORK_NUMBER 0x03 #define PRI_PRES_RESTRICTION 0x60 #define PRI_PRES_ALLOWED 0x00 #define PRI_PRES_RESTRICTED 0x20 #define PRI_PRES_UNAVAILABLE 0x40 #define PRI_PRES_RESERVED 0x60 #define PRES_ALLOWED_USER_NUMBER_NOT_SCREENED \ (PRI_PRES_ALLOWED | PRI_PRES_USER_NUMBER_UNSCREENED) #define PRES_ALLOWED_USER_NUMBER_PASSED_SCREEN \ (PRI_PRES_ALLOWED | PRI_PRES_USER_NUMBER_PASSED_SCREEN) #define PRES_ALLOWED_USER_NUMBER_FAILED_SCREEN \ (PRI_PRES_ALLOWED | PRI_PRES_USER_NUMBER_FAILED_SCREEN) #define PRES_ALLOWED_NETWORK_NUMBER \ (PRI_PRES_ALLOWED | PRI_PRES_NETWORK_NUMBER) #define PRES_PROHIB_USER_NUMBER_NOT_SCREENED \ (PRI_PRES_RESTRICTED | PRI_PRES_USER_NUMBER_UNSCREENED) #define PRES_PROHIB_USER_NUMBER_PASSED_SCREEN \ (PRI_PRES_RESTRICTED | PRI_PRES_USER_NUMBER_PASSED_SCREEN) #define PRES_PROHIB_USER_NUMBER_FAILED_SCREEN \ (PRI_PRES_RESTRICTED | PRI_PRES_USER_NUMBER_FAILED_SCREEN) #define PRES_PROHIB_NETWORK_NUMBER \ (PRI_PRES_RESTRICTED | PRI_PRES_NETWORK_NUMBER) #define PRES_NUMBER_NOT_AVAILABLE \ (PRI_PRES_UNAVAILABLE | PRI_PRES_NETWORK_NUMBER) /* Reverse Charging Indication */ #define PRI_REVERSECHARGE_NONE -1 #define PRI_REVERSECHARGE_REQUESTED 1 /* Causes for disconnection (See Q.850) */ #define PRI_CAUSE_UNALLOCATED 1 /*!< Called number unassigned. */ #define PRI_CAUSE_NO_ROUTE_TRANSIT_NET 2 /* !Q.SIG */ #define PRI_CAUSE_NO_ROUTE_DESTINATION 3 #define PRI_CAUSE_CHANNEL_UNACCEPTABLE 6 #define PRI_CAUSE_CALL_AWARDED_DELIVERED 7 /* !Q.SIG */ #define PRI_CAUSE_NORMAL_CLEARING 16 #define PRI_CAUSE_USER_BUSY 17 #define PRI_CAUSE_NO_USER_RESPONSE 18 #define PRI_CAUSE_NO_ANSWER 19 #define PRI_CAUSE_CALL_REJECTED 21 #define PRI_CAUSE_NUMBER_CHANGED 22 #define PRI_CAUSE_NONSELECTED_USER_CLEARING 26 #define PRI_CAUSE_DESTINATION_OUT_OF_ORDER 27 #define PRI_CAUSE_INVALID_NUMBER_FORMAT 28 #define PRI_CAUSE_FACILITY_REJECTED 29 /* !Q.SIG */ #define PRI_CAUSE_RESPONSE_TO_STATUS_ENQUIRY 30 #define PRI_CAUSE_NORMAL_UNSPECIFIED 31 #define PRI_CAUSE_NORMAL_CIRCUIT_CONGESTION 34 #define PRI_CAUSE_NETWORK_OUT_OF_ORDER 38 /* !Q.SIG */ #define PRI_CAUSE_NORMAL_TEMPORARY_FAILURE 41 #define PRI_CAUSE_SWITCH_CONGESTION 42 /* !Q.SIG */ #define PRI_CAUSE_ACCESS_INFO_DISCARDED 43 /* !Q.SIG */ #define PRI_CAUSE_REQUESTED_CHAN_UNAVAIL 44 #define PRI_CAUSE_PRE_EMPTED 45 /* !Q.SIG */ #define PRI_CAUSE_RESOURCE_UNAVAIL_UNSPECIFIED 47 #define PRI_CAUSE_FACILITY_NOT_SUBSCRIBED 50 /* !Q.SIG */ #define PRI_CAUSE_OUTGOING_CALL_BARRED 52 /* !Q.SIG */ #define PRI_CAUSE_INCOMING_CALL_BARRED 54 /* !Q.SIG */ #define PRI_CAUSE_BEARERCAPABILITY_NOTAUTH 57 #define PRI_CAUSE_BEARERCAPABILITY_NOTAVAIL 58 #define PRI_CAUSE_SERVICEOROPTION_NOTAVAIL 63 /* Q.SIG */ #define PRI_CAUSE_BEARERCAPABILITY_NOTIMPL 65 #define PRI_CAUSE_CHAN_NOT_IMPLEMENTED 66 /* !Q.SIG */ #define PRI_CAUSE_FACILITY_NOT_IMPLEMENTED 69 /* !Q.SIG */ #define PRI_CAUSE_INVALID_CALL_REFERENCE 81 #define PRI_CAUSE_IDENTIFIED_CHANNEL_NOTEXIST 82 /* Q.SIG */ #define PRI_CAUSE_INCOMPATIBLE_DESTINATION 88 #define PRI_CAUSE_INVALID_MSG_UNSPECIFIED 95 /* !Q.SIG */ #define PRI_CAUSE_MANDATORY_IE_MISSING 96 #define PRI_CAUSE_MESSAGE_TYPE_NONEXIST 97 #define PRI_CAUSE_WRONG_MESSAGE 98 #define PRI_CAUSE_IE_NONEXIST 99 #define PRI_CAUSE_INVALID_IE_CONTENTS 100 #define PRI_CAUSE_WRONG_CALL_STATE 101 #define PRI_CAUSE_RECOVERY_ON_TIMER_EXPIRE 102 #define PRI_CAUSE_MANDATORY_IE_LENGTH_ERROR 103 /* !Q.SIG */ #define PRI_CAUSE_PROTOCOL_ERROR 111 #define PRI_CAUSE_INTERWORKING 127 /* !Q.SIG */ /* Transmit capabilities */ #define PRI_TRANS_CAP_SPEECH 0x0 #define PRI_TRANS_CAP_DIGITAL 0x08 #define PRI_TRANS_CAP_RESTRICTED_DIGITAL 0x09 #define PRI_TRANS_CAP_3_1K_AUDIO 0x10 #define PRI_TRANS_CAP_7K_AUDIO 0x11 /* Depriciated ITU Q.931 (05/1998)*/ #define PRI_TRANS_CAP_DIGITAL_W_TONES 0x11 #define PRI_TRANS_CAP_VIDEO 0x18 #define PRI_LAYER_1_ITU_RATE_ADAPT 0x21 #define PRI_LAYER_1_ULAW 0x22 #define PRI_LAYER_1_ALAW 0x23 #define PRI_LAYER_1_G721 0x24 #define PRI_LAYER_1_G722_G725 0x25 #define PRI_LAYER_1_H223_H245 0x26 #define PRI_LAYER_1_NON_ITU_ADAPT 0x27 #define PRI_LAYER_1_V120_RATE_ADAPT 0x28 #define PRI_LAYER_1_X31_RATE_ADAPT 0x29 /* Intermediate rates for V.110 */ #define PRI_INT_RATE_8K 1 #define PRI_INT_RATE_16K 2 #define PRI_INT_RATE_32K 3 /* Rate adaption for bottom 5 bits of rateadaption */ #define PRI_RATE_USER_RATE_MASK 0x1F #define PRI_RATE_ADAPT_UNSPEC 0x00 #define PRI_RATE_ADAPT_0K6 0x01 #define PRI_RATE_ADAPT_1K2 0x02 #define PRI_RATE_ADAPT_2K4 0x03 #define PRI_RATE_ADAPT_3K6 0x04 #define PRI_RATE_ADAPT_4K8 0x05 #define PRI_RATE_ADAPT_7K2 0x06 #define PRI_RATE_ADAPT_8K 0x07 #define PRI_RATE_ADAPT_9K6 0x08 #define PRI_RATE_ADAPT_14K4 0x09 #define PRI_RATE_ADAPT_16K 0x0A #define PRI_RATE_ADAPT_19K2 0x0B #define PRI_RATE_ADAPT_32K 0x0C #define PRI_RATE_ADAPT_38K4 0x0D #define PRI_RATE_ADAPT_48K 0x0E #define PRI_RATE_ADAPT_56K 0x0F #define PRI_RATE_ADAPT_57K6 0x12 #define PRI_RATE_ADAPT_28K8 0x13 #define PRI_RATE_ADAPT_24K 0x14 #define PRI_RATE_ADAPT_0K1345 0x15 #define PRI_RATE_ADAPT_0K1 0x16 #define PRI_RATE_ADAPT_0K075_1K2 0x17 #define PRI_RATE_ADAPT_1K2_0K075 0x18 #define PRI_RATE_ADAPT_0K05 0x19 #define PRI_RATE_ADAPT_0K075 0x1A #define PRI_RATE_ADAPT_0K110 0x1B #define PRI_RATE_ADAPT_0K150 0x1C #define PRI_RATE_ADAPT_0K200 0x1D #define PRI_RATE_ADAPT_0K300 0x1E #define PRI_RATE_ADAPT_12K 0x1F /* in-band negotiation flag for rateadaption bit 5 */ #define PRI_RATE_ADAPT_NEGOTIATION_POSS 0x20 /* async flag for rateadaption bit 6 */ #define PRI_RATE_ADAPT_ASYNC 0x40 /* Notifications */ #define PRI_NOTIFY_USER_SUSPENDED 0x00 /* User suspended (Q.931) (Call is placed on hold) */ #define PRI_NOTIFY_USER_RESUMED 0x01 /* User resumed (Q.931) (Call is taken off hold) */ #define PRI_NOTIFY_BEARER_CHANGE 0x02 /* Bearer service change (DSS1) */ #define PRI_NOTIFY_ASN1_COMPONENT 0x03 /* ASN.1 encoded component (DSS1) */ #define PRI_NOTIFY_COMPLETION_DELAY 0x04 /* Call completion delay */ #define PRI_NOTIFY_CONF_ESTABLISHED 0x42 /* Conference established */ #define PRI_NOTIFY_CONF_DISCONNECTED 0x43 /* Conference disconnected */ #define PRI_NOTIFY_CONF_PARTY_ADDED 0x44 /* Other party added */ #define PRI_NOTIFY_CONF_ISOLATED 0x45 /* Isolated */ #define PRI_NOTIFY_CONF_REATTACHED 0x46 /* Reattached */ #define PRI_NOTIFY_CONF_OTHER_ISOLATED 0x47 /* Other party isolated */ #define PRI_NOTIFY_CONF_OTHER_REATTACHED 0x48 /* Other party reattached */ #define PRI_NOTIFY_CONF_OTHER_SPLIT 0x49 /* Other party split */ #define PRI_NOTIFY_CONF_OTHER_DISCONNECTED 0x4a /* Other party disconnected */ #define PRI_NOTIFY_CONF_FLOATING 0x4b /* Conference floating */ #define PRI_NOTIFY_WAITING_CALL 0x60 /* Call is waiting call */ #define PRI_NOTIFY_DIVERSION_ACTIVATED 0x68 /* Diversion activated (DSS1) (cfu, cfb, cfnr) (EN 300 207-1 Section 7.2.1) */ #define PRI_NOTIFY_TRANSFER_ALERTING 0x69 /* Call transfer, alerting (EN 300 369-1 Section 7.2) */ #define PRI_NOTIFY_TRANSFER_ACTIVE 0x6a /* Call transfer, active(answered) (EN 300 369-1 Section 7.2) */ #define PRI_NOTIFY_REMOTE_HOLD 0x79 /* Remote hold */ #define PRI_NOTIFY_REMOTE_RETRIEVAL 0x7a /* Remote retrieval */ #define PRI_NOTIFY_CALL_DIVERTING 0x7b /* Call is diverting (EN 300 207-1 Section 7.2.1) */ #define PRI_COPY_DIGITS_CALLED_NUMBER /* Network Specific Facilities (AT&T) */ #define PRI_NSF_NONE -1 #define PRI_NSF_SID_PREFERRED 0xB1 #define PRI_NSF_ANI_PREFERRED 0xB2 #define PRI_NSF_SID_ONLY 0xB3 #define PRI_NSF_ANI_ONLY 0xB4 #define PRI_NSF_CALL_ASSOC_TSC 0xB9 #define PRI_NSF_NOTIF_CATSC_CLEARING 0xBA #define PRI_NSF_OPERATOR 0xB5 #define PRI_NSF_PCCO 0xB6 #define PRI_NSF_SDN 0xE1 #define PRI_NSF_TOLL_FREE_MEGACOM 0xE2 #define PRI_NSF_MEGACOM 0xE3 #define PRI_NSF_ACCUNET 0xE6 #define PRI_NSF_LONG_DISTANCE_SERVICE 0xE7 #define PRI_NSF_INTERNATIONAL_TOLL_FREE 0xE8 #define PRI_NSF_ATT_MULTIQUEST 0xF0 #define PRI_NSF_CALL_REDIRECTION_SERVICE 0xF7 typedef struct q931_call q931_call; /* Name character set enumeration values */ #define PRI_CHAR_SET_UNKNOWN 0 #define PRI_CHAR_SET_ISO8859_1 1 #define PRI_CHAR_SET_WITHDRAWN 2 #define PRI_CHAR_SET_ISO8859_2 3 #define PRI_CHAR_SET_ISO8859_3 4 #define PRI_CHAR_SET_ISO8859_4 5 #define PRI_CHAR_SET_ISO8859_5 6 #define PRI_CHAR_SET_ISO8859_7 7 #define PRI_CHAR_SET_ISO10646_BMPSTRING 8 #define PRI_CHAR_SET_ISO10646_UTF_8STRING 9 /*! \brief Q.SIG name information. */ struct pri_party_name { /*! \brief TRUE if the name information is valid/present */ int valid; /*! * \brief Q.931 presentation-indicator encoded field * \note Must tollerate the Q.931 screening-indicator field values being present. */ int presentation; /*! * \brief Character set the name is using. * \details * unknown(0), * iso8859-1(1), * enum-value-withdrawn-by-ITU-T(2) * iso8859-2(3), * iso8859-3(4), * iso8859-4(5), * iso8859-5(6), * iso8859-7(7), * iso10646-BmpString(8), * iso10646-utf-8String(9) * \details * Set to iso8859-1(1) if unsure what to use. */ int char_set; /*! \brief Name data with null terminator. */ char str[64]; }; struct pri_party_number { /*! \brief TRUE if the number information is valid/present */ int valid; /*! \brief Q.931 presentation-indicator and screening-indicator encoded fields */ int presentation; /*! \brief Q.931 Type-Of-Number and numbering-plan encoded fields */ int plan; /*! \brief Number data with null terminator. */ char str[64]; }; /*! * \note This structure is a place holder for possible future subaddress support * to maintain ABI compatibility. */ struct pri_party_subaddress { /*! \brief TRUE if the subaddress information is valid/present */ int valid; /*! * \brief Subaddress type. * \details * nsap(0), * user_specified(2) */ int type; /*! * \brief TRUE if odd number of address signals * \note The odd/even indicator is used when the type of subaddress is * user_specified and the coding is BCD. */ int odd_even_indicator; /*! \brief Length of the subaddress data */ int length; /*! * \brief Subaddress data with null terminator. * \note The null terminator is a convenience only since the data could be * BCD/binary and thus have a null byte as part of the contents. */ unsigned char data[32]; }; /*! \brief Addressing information needed to identify an endpoint in a call. */ struct pri_party_address { /*! \brief Subscriber phone number */ struct pri_party_number number; /*! \brief Subscriber subaddress */ struct pri_party_subaddress subaddress; }; /*! \brief Information needed to identify an endpoint in a call. */ struct pri_party_id { /*! \brief Subscriber name */ struct pri_party_name name; /*! \brief Subscriber phone number */ struct pri_party_number number; /*! \brief Subscriber subaddress */ struct pri_party_subaddress subaddress; }; /*! \brief Connected Line/Party information */ struct pri_party_connected_line { /*! Connected party ID */ struct pri_party_id id; }; /*! * \brief Redirecting Line information. * \details * RDNIS (Redirecting Directory Number Information Service) * Where a call diversion or transfer was invoked. */ struct pri_party_redirecting { /*! Who is redirecting the call (Sent to the party the call is redirected toward) */ struct pri_party_id from; /*! Call is redirecting to a new party (Sent to the caller) */ struct pri_party_id to; /*! Originally called party (in cases of multiple redirects) */ struct pri_party_id orig_called; /*! Number of times the call was redirected */ int count; /*! Original reason for redirect (in cases of multiple redirects) */ int orig_reason; /*! Redirection reason */ int reason; }; /*! * \brief Information for rerouting/deflecting the call. */ struct pri_rerouting_data { /*! * \brief Updated caller-id information. * \note The information may have been altered by procedure in the private network. */ struct pri_party_id caller; /*! * \note * deflection.to is the new called number and must always be present. */ struct pri_party_redirecting deflection; /*! * \brief Diverting user subscription option to specify if caller is notified. * \details * noNotification(0), * notificationWithoutDivertedToNr(1), * notificationWithDivertedToNr(2), * notApplicable(3) (Status only.) */ int subscription_option; /*! Invocation ID to use when sending a reply to the call rerouting/deflection request. */ int invoke_id; }; /* * NOTE: * The code surrounded by STATUS_REQUEST_PLACE_HOLDER is not implemented. * The STATUS_REQUEST_PLACE_HOLDER code will be made unconditional if support * for the messages is ever needed (and gets written). */ /* Subcommands derived from supplementary services. */ #define PRI_SUBCMD_REDIRECTING 1 /*!< Redirecting information update */ #define PRI_SUBCMD_CONNECTED_LINE 2 /*!< Connected line information update */ #define PRI_SUBCMD_REROUTING 3 /*!< CallRerouting/CallDeflection received. */ #if defined(STATUS_REQUEST_PLACE_HOLDER) #define PRI_SUBCMD_STATUS_REQ 4 /*!< Determine the status of the given party. */ #define PRI_SUBCMD_STATUS_REQ_RSP 5 /*!< Status request response */ #endif /* defined(STATUS_REQUEST_PLACE_HOLDER) */ #define PRI_SUBCMD_CC_AVAILABLE 6 /*!< Indicate that CC is available */ #define PRI_SUBCMD_CC_REQ 7 /*!< CC activation request */ #define PRI_SUBCMD_CC_REQ_RSP 8 /*!< CC activation request response */ #define PRI_SUBCMD_CC_REMOTE_USER_FREE 9 /*!< Indicate that CC party B is available, party A is considered free. */ #define PRI_SUBCMD_CC_B_FREE 10 /*!< Indicate that CC party B is available, party A is considered busy. */ #define PRI_SUBCMD_CC_STATUS_REQ 11 /*!< Request/prod to receive updates of CC party A status */ #define PRI_SUBCMD_CC_STATUS_REQ_RSP 12 /*!< Requested update of CC party A status */ #define PRI_SUBCMD_CC_STATUS 13 /*!< Unsolicited update of CC party A status */ #define PRI_SUBCMD_CC_CALL 14 /*!< Indicate that this call is a CC callback */ #define PRI_SUBCMD_CC_CANCEL 15 /*!< Unsolicited indication that CC is canceled */ #define PRI_SUBCMD_CC_STOP_ALERTING 16 /*!< Indicate that someone else has responed to remote user free */ #define PRI_SUBCMD_TRANSFER_CALL 17 /*!< Request to transfer the specified calls together. */ #define PRI_SUBCMD_AOC_S 18 /*!< Advice Of Charge Start information (Rate list) */ #define PRI_SUBCMD_AOC_D 19 /*!< Advice Of Charge During information */ #define PRI_SUBCMD_AOC_E 20 /*!< Advice Of Charge End information */ #define PRI_SUBCMD_AOC_CHARGING_REQ 21 /*!< Advice Of Charge Request information */ #define PRI_SUBCMD_AOC_CHARGING_REQ_RSP 22 /*!< Advice Of Charge Request Response information */ #define PRI_SUBCMD_MCID_REQ 23 /*!< Malicious Call ID Request */ #define PRI_SUBCMD_MCID_RSP 24 /*!< Malicious Call ID Request response */ #define PRI_SUBCMD_DISPLAY_TEXT 25 /*!< Received display ie text */ #if defined(STATUS_REQUEST_PLACE_HOLDER) struct pri_subcmd_status_request { /*! * \brief Invoke id in case there are multiple outstanding requests. * \note Used to match any responses with the original invoke in case * there are several requests active. */ int invoke_id; /*! \brief Party address requesting status about. */ struct pri_party_address party; }; #endif /* defined(STATUS_REQUEST_PLACE_HOLDER) */ #if defined(STATUS_REQUEST_PLACE_HOLDER) struct pri_subcmd_status_request_rsp { /*! * \brief Request id in case there are multiple outstanding requests. * \note Used to match any responses with the request in case there * are several requests active. */ int request_id; /*! * \brief Response status to the status request. * \details * free(0), * busy(1), * incompatible(2) * timeout(3), */ int status; }; #endif /* defined(STATUS_REQUEST_PLACE_HOLDER) */ struct pri_subcmd_cc_id { /*! \brief Call-Completion record id */ long cc_id; }; struct pri_subcmd_cc_request { /*! \brief Call-Completion record id */ long cc_id; /*! * \brief Mode of call-completion requested. * \details * ccbs(0), * ccnr(1) */ int mode; }; struct pri_subcmd_cc_request_rsp { /*! \brief Call-Completion record id */ long cc_id; /*! * \brief Status of the requested call-completion activation. * \details * success(0), * timeout(1), * error(2), * reject(3) */ int status; /*! * \brief Failure code that can be converted to a string to further * explain the non-timeout failure. * \note Valid when status is error or reject. * \note Use pri_facility_error2str() to convert the error_code. * \note Use pri_facility_reject2str() to convert the reject_code. */ int fail_code; }; struct pri_subcmd_cc_status { /*! \brief Call-Completion record id */ long cc_id; /*! * \brief Party A status. * \details * free(0), * busy(1) */ int status; }; struct pri_subcmd_cc_cancel { /*! \brief Call-Completion record id */ long cc_id; /*! * \brief TRUE if the cc_id is for an agent. * \note This is a convenience value so the upper layer can know which * list it should search for the cc_id. */ int is_agent; }; struct pri_subcmd_transfer { /*! \brief Opaque call pointer for transfer with other call. */ q931_call *call_1; /*! \brief Opaque call pointer for transfer with other call. */ q931_call *call_2; /*! TRUE if call_1 is on hold. */ int is_call_1_held; /*! TRUE if call_2 is on hold. */ int is_call_2_held; /*! Invocation ID to use when sending a reply to the transfer request. */ int invoke_id; }; /*! \brief What is being charged. */ enum PRI_AOC_CHARGED_ITEM { PRI_AOC_CHARGED_ITEM_NOT_AVAILABLE, PRI_AOC_CHARGED_ITEM_SPECIAL_ARRANGEMENT, PRI_AOC_CHARGED_ITEM_BASIC_COMMUNICATION, PRI_AOC_CHARGED_ITEM_CALL_ATTEMPT, PRI_AOC_CHARGED_ITEM_CALL_SETUP, PRI_AOC_CHARGED_ITEM_USER_USER_INFO, PRI_AOC_CHARGED_ITEM_SUPPLEMENTARY_SERVICE, }; /*! \brief Rate method being used. */ enum PRI_AOC_RATE_TYPE { PRI_AOC_RATE_TYPE_NOT_AVAILABLE, PRI_AOC_RATE_TYPE_FREE, PRI_AOC_RATE_TYPE_FREE_FROM_BEGINNING, PRI_AOC_RATE_TYPE_DURATION, PRI_AOC_RATE_TYPE_FLAT, PRI_AOC_RATE_TYPE_VOLUME, PRI_AOC_RATE_TYPE_SPECIAL_CODE, }; enum PRI_AOC_TIME_SCALE { PRI_AOC_TIME_SCALE_HUNDREDTH_SECOND, PRI_AOC_TIME_SCALE_TENTH_SECOND, PRI_AOC_TIME_SCALE_SECOND, PRI_AOC_TIME_SCALE_TEN_SECOND, PRI_AOC_TIME_SCALE_MINUTE, PRI_AOC_TIME_SCALE_HOUR, PRI_AOC_TIME_SCALE_DAY, }; struct pri_aoc_time { /*! LengthOfTimeUnit (Not valid if length is zero.) */ long length; /*! \see enum PRI_AOC_TIME_SCALE */ int scale; }; enum PRI_AOC_MULTIPLIER { PRI_AOC_MULTIPLIER_THOUSANDTH, PRI_AOC_MULTIPLIER_HUNDREDTH, PRI_AOC_MULTIPLIER_TENTH, PRI_AOC_MULTIPLIER_ONE, PRI_AOC_MULTIPLIER_TEN, PRI_AOC_MULTIPLIER_HUNDRED, PRI_AOC_MULTIPLIER_THOUSAND, }; struct pri_aoc_amount { long cost; /*! \see enum PRI_AOC_MULTIPLIER */ int multiplier; }; struct pri_aoc_duration { struct pri_aoc_amount amount; struct pri_aoc_time time; /*! Not present if the granularity time is zero. */ struct pri_aoc_time granularity; /*! * \brief Charging interval type * \details * continuousCharging(0), * stepFunction(1) */ int charging_type; /*! Name of currency involved. Null terminated. */ char currency[10 + 1]; }; struct pri_aoc_flat { struct pri_aoc_amount amount; /*! Name of currency involved. Null terminated. */ char currency[10 + 1]; }; enum PRI_AOC_VOLUME_UNIT { PRI_AOC_VOLUME_UNIT_OCTET, PRI_AOC_VOLUME_UNIT_SEGMENT, PRI_AOC_VOLUME_UNIT_MESSAGE, }; struct pri_aoc_volume { struct pri_aoc_amount amount; /*! \see enum PRI_AOC_VOLUME_UNIT */ int unit; /*! Name of currency involved. Null terminated. */ char currency[10 + 1]; }; struct pri_aoc_s_element { /*! * \brief What is being charged. * \see enum PRI_AOC_CHARGED_ITEM */ int chargeable; /*! * \brief Rate method being used. * \see enum PRI_AOC_RATE_TYPE */ int rate_type; /*! \brief Charge rate being applied. */ union { struct pri_aoc_duration duration; struct pri_aoc_flat flat; struct pri_aoc_volume volume; int special; } rate; }; struct pri_subcmd_aoc_s { /*! * \brief Number of items in the rate list. * \note If the list is empty then the charging information is not available. */ int num_items; struct pri_aoc_s_element item[10]; }; enum PRI_AOC_DE_CHARGE { PRI_AOC_DE_CHARGE_NOT_AVAILABLE, PRI_AOC_DE_CHARGE_FREE, PRI_AOC_DE_CHARGE_CURRENCY, PRI_AOC_DE_CHARGE_UNITS, }; struct pri_aoc_recorded_currency { struct pri_aoc_amount amount; /*! Name of currency involved. Null terminated. */ char currency[10 + 1]; }; struct pri_aoc_units_element { /*! Number of units recorded. -1 if not available. */ long number; /*! Type of unit recorded. -1 if not available. */ int type; }; struct pri_aoc_recorded_units { int num_items; struct pri_aoc_units_element item[32]; }; enum PRI_AOC_D_BILLING_ID { PRI_AOC_D_BILLING_ID_NOT_AVAILABLE, PRI_AOC_D_BILLING_ID_NORMAL, PRI_AOC_D_BILLING_ID_REVERSE, PRI_AOC_D_BILLING_ID_CREDIT_CARD, }; struct pri_subcmd_aoc_d { /*! * \brief What is being charged. * \see enum PRI_AOC_DE_CHARGE */ int charge; /*! * \brief Billing accumulation * \details * subTotal(0), * total(1) */ int billing_accumulation; /*! \see enum PRI_AOC_D_BILLING_ID */ int billing_id; union { /*! Recorded currency */ struct pri_aoc_recorded_currency money; /*! Recorded units list */ struct pri_aoc_recorded_units unit; } recorded; }; enum PRI_AOC_E_BILLING_ID { PRI_AOC_E_BILLING_ID_NOT_AVAILABLE, PRI_AOC_E_BILLING_ID_NORMAL, PRI_AOC_E_BILLING_ID_REVERSE, PRI_AOC_E_BILLING_ID_CREDIT_CARD, PRI_AOC_E_BILLING_ID_CALL_FORWARDING_UNCONDITIONAL, PRI_AOC_E_BILLING_ID_CALL_FORWARDING_BUSY, PRI_AOC_E_BILLING_ID_CALL_FORWARDING_NO_REPLY, PRI_AOC_E_BILLING_ID_CALL_DEFLECTION, PRI_AOC_E_BILLING_ID_CALL_TRANSFER, }; enum PRI_AOC_E_CHARGING_ASSOCIATION { PRI_AOC_E_CHARGING_ASSOCIATION_NOT_AVAILABLE, PRI_AOC_E_CHARGING_ASSOCIATION_NUMBER, PRI_AOC_E_CHARGING_ASSOCIATION_ID, }; struct pri_aoc_e_charging_association { union { /*! Charged number */ struct pri_party_number number; /*! Charge identifier */ int id; } charge; /*! \see enum PRI_AOC_E_CHARGING_ASSOCIATION */ int charging_type; }; struct pri_subcmd_aoc_e { /*! * \brief What is being charged. * \see enum PRI_AOC_DE_CHARGE */ int charge; /*! \see enum PRI_AOC_E_BILLING_ID */ int billing_id; union { /*! Recorded currency */ struct pri_aoc_recorded_currency money; /*! Recorded units list */ struct pri_aoc_recorded_units unit; } recorded; /*! Charging association. */ struct pri_aoc_e_charging_association associated; }; enum PRI_AOC_REQ_RSP { /* Error Results */ PRI_AOC_REQ_RSP_ERROR_NOT_IMPLEMENTED, PRI_AOC_REQ_RSP_ERROR_NOT_AVAILABLE, PRI_AOC_REQ_RSP_ERROR_TIMEOUT, PRI_AOC_REQ_RSP_ERROR_REJECT, /* generic error result all other errors are lumped into */ PRI_AOC_REQ_RSP_ERROR, /* AOC Results */ PRI_AOC_REQ_RSP_CHARGING_INFO_FOLLOWS, PRI_AOC_REQ_RSP_CURRENCY_INFO_LIST, PRI_AOC_REQ_RSP_SPECIAL_ARR, }; enum PRI_AOC_REQUEST { PRI_AOC_REQUEST_S = (1 << 0), PRI_AOC_REQUEST_D = (1 << 1), PRI_AOC_REQUEST_E = (1 << 2), }; struct pri_subcmd_aoc_request_response { /*! * \brief aoc_s data from response */ struct pri_subcmd_aoc_s aoc_s; /*! * \brief if the aoc_s msg is present, this will be set */ int valid_aoc_s; /*! * \brief What type of aoc was requested. * \see enum PRI_AOC_REQUEST */ int charging_request; /*! * \brief response to the charging_request * \see enum PRI_AOC_REQ_RSP */ int charging_response; }; struct pri_subcmd_aoc_request { /*! * \brief What types of aoc are being requested. * \see enum PRI_AOC_REQUEST */ int charging_request; /*! * \brief Value given by the initiating request. */ int invoke_id; }; struct pri_subcmd_mcid_req { /*! * \brief Information libpri knows about the malicious caller. * \note For the convenience of the upper layer. This information * may be incomplete if the upper layer redacted some caller * information because it was restricted. */ struct pri_party_id originator; /*! \brief Information libpri knows about the callee. */ struct pri_party_id answerer; }; struct pri_subcmd_mcid_rsp { /*! * \brief MCID request response status. * \details * success(0), * timeout(1), * error(2), * reject(3) */ int status; /*! * \brief Failure code that can be converted to a string to further * explain the non-timeout failure. * \note Valid when status is error or reject. * \note Use pri_facility_error2str() to convert the error_code. * \note Use pri_facility_reject2str() to convert the reject_code. */ int fail_code; }; struct pri_subcmd_display_txt { /*! * \brief Character set the text is using. * \details * unknown(0), * iso8859-1(1), * enum-value-withdrawn-by-ITU-T(2) * iso8859-2(3), * iso8859-3(4), * iso8859-4(5), * iso8859-5(6), * iso8859-7(7), * iso10646-BmpString(8), * iso10646-utf-8String(9) */ int char_set; /*! * \brief Number of octets in the display message. * \note Not including any added null terminator. */ int length; /*! * \brief Display text data. * \note Null terminated on receive. * \note Does not need to be null terminated on send. */ char text[128]; }; struct pri_subcommand { /*! PRI_SUBCMD_xxx defined values */ int cmd; union { /*! Reserve room for possible expansion to maintain ABI compatibility. */ char reserve_space[512]; struct pri_party_connected_line connected_line; struct pri_party_redirecting redirecting; struct pri_rerouting_data rerouting; #if defined(STATUS_REQUEST_PLACE_HOLDER) struct pri_subcmd_status_request status_request; struct pri_subcmd_status_request_rsp status_request_rsp; #endif /* defined(STATUS_REQUEST_PLACE_HOLDER) */ struct pri_subcmd_cc_id cc_available; struct pri_subcmd_cc_request cc_request; struct pri_subcmd_cc_request_rsp cc_request_rsp; struct pri_subcmd_cc_id cc_remote_user_free; struct pri_subcmd_cc_id cc_b_free; struct pri_subcmd_cc_id cc_stop_alerting; struct pri_subcmd_cc_id cc_status_req; struct pri_subcmd_cc_status cc_status_req_rsp; struct pri_subcmd_cc_status cc_status; struct pri_subcmd_cc_id cc_call; struct pri_subcmd_cc_cancel cc_cancel; struct pri_subcmd_transfer transfer; struct pri_subcmd_aoc_request aoc_request; struct pri_subcmd_aoc_request_response aoc_request_response; struct pri_subcmd_aoc_s aoc_s; struct pri_subcmd_aoc_d aoc_d; struct pri_subcmd_aoc_e aoc_e; struct pri_subcmd_mcid_req mcid_req; struct pri_subcmd_mcid_rsp mcid_rsp; struct pri_subcmd_display_txt display; } u; }; /* Max number of subcommands per event message */ #define PRI_MAX_SUBCOMMANDS 8 struct pri_subcommands { int counter_subcmd; struct pri_subcommand subcmd[PRI_MAX_SUBCOMMANDS]; }; /* * Event channel parameter encoding: * 3322 2222 2222 1111 1111 1100 0000 0000 * 1098 7654 3210 9876 5432 1098 7654 3210 * xxxx xxxx xxxx xEDC BBBBBBBBB AAAAAAAAA * * Bit field * A - B channel * B - Span (DS1) (0 - 127) * C - DS1 Explicit bit * D - D channel (cis_call) bit (status only) * E - Call is held bit (status only) * * B channel values: * 0 - No channel (ISDN uses for call waiting feature) * 1-127 - B channel # * 0xFF - Any channel (Also if whole channel value is -1 in event) */ typedef struct pri_event_generic { /* Events with no additional information fall in this category */ int e; } pri_event_generic; typedef struct pri_event_error { int e; char err[256]; } pri_event_error; typedef struct pri_event_restart { int e; int channel; } pri_event_restart; typedef struct pri_event_ringing { int e; int channel; int cref; int progress; int progressmask; q931_call *call; char useruserinfo[260]; /* User->User info */ struct pri_subcommands *subcmds; } pri_event_ringing; typedef struct pri_event_answer { int e; int channel; int cref; int progress; int progressmask; q931_call *call; char useruserinfo[260]; /* User->User info */ struct pri_subcommands *subcmds; } pri_event_answer; /*! Deprecated replaced by struct pri_event_facility. */ typedef struct pri_event_facname { int e; char callingname[256]; char callingnum[256]; int channel; int cref; q931_call *call; int callingpres; /* Presentation of Calling CallerID */ int callingplan; /* Dialing plan of Calling entity */ } pri_event_facname; struct pri_event_facility { int e; char callingname[256]; /*!< Deprecated, preserved for struct pri_event_facname compatibility */ char callingnum[256]; /*!< Deprecated, preserved for struct pri_event_facname compatibility */ int channel; int cref; /*! * \brief Master call or normal call. * \note Call pointer known about by upper layer. * \note NULL if dummy call reference. */ q931_call *call; int callingpres; /*!< Presentation of Calling CallerID (Deprecated, preserved for struct pri_event_facname compatibility) */ int callingplan; /*!< Dialing plan of Calling entity (Deprecated, preserved for struct pri_event_facname compatibility) */ struct pri_subcommands *subcmds; q931_call *subcall; /*!< Subcall to send any reply toward. */ }; #define PRI_CALLINGPLANANI #define PRI_CALLINGPLANRDNIS typedef struct pri_event_ring { int e; int channel; /* Channel requested */ int callingpres; /* Presentation of Calling CallerID */ int callingplanani; /* Dialing plan of Calling entity ANI */ int callingplan; /* Dialing plan of Calling entity */ char callingani[256]; /* Calling ANI */ char callingnum[256]; /* Calling number */ char callingname[256]; /* Calling name (if provided) */ int calledplan; /* Dialing plan of Called number */ int ani2; /* ANI II */ char callednum[256]; /* Called number */ char redirectingnum[256]; /* Redirecting number */ char redirectingname[256]; /* Redirecting name */ int redirectingreason; /* Reason for redirect */ int callingplanrdnis; /* Dialing plan of Redirecting Number */ char useruserinfo[260]; /* User->User info */ int flexible; /* Are we flexible with our channel selection? */ int cref; /* Call Reference Number */ int ctype; /* Call type (see PRI_TRANS_CAP_* */ int layer1; /* User layer 1 */ int complete; /* Have we seen "Complete" i.e. no more number? */ q931_call *call; /* Opaque call pointer */ char callingsubaddr[256]; /* Calling parties subaddress, backwards compatibility */ int progress; int progressmask; char origcalledname[256]; char origcallednum[256]; int callingplanorigcalled; /* Dialing plan of Originally Called Number */ int origredirectingreason; int reversecharge; struct pri_subcommands *subcmds; struct pri_party_id calling; /* Calling Party's info, initially subaddress' */ struct pri_party_subaddress called_subaddress; /* Called party's subaddress */ char keypad_digits[64]; /* Keypad digits in the SETUP message. */ } pri_event_ring; typedef struct pri_event_hangup { int e; int channel; /* Channel requested */ int cause; int cref; q931_call *call; /* Opaque call pointer of call hanging up. */ long aoc_units; /* Advice of Charge number of charged units */ char useruserinfo[260]; /* User->User info */ struct pri_subcommands *subcmds; /*! * \brief Opaque held call pointer for possible transfer to active call. * \note The call_held and call_active pointers must not be NULL if * transfer held call on disconnect is available. */ q931_call *call_held; /*! * \brief Opaque active call pointer for possible transfer with held call. * \note The call_held and call_active pointers must not be NULL if * transfer held call on disconnect is available. */ q931_call *call_active; } pri_event_hangup; typedef struct pri_event_restart_ack { int e; int channel; } pri_event_restart_ack; #define PRI_PROGRESS_CAUSE typedef struct pri_event_proceeding { int e; int channel; int cref; int progress; int progressmask; int cause; q931_call *call; struct pri_subcommands *subcmds; } pri_event_proceeding; typedef struct pri_event_setup_ack { int e; int channel; q931_call *call; struct pri_subcommands *subcmds; int progressmask; } pri_event_setup_ack; typedef struct pri_event_notify { int e; int channel; int info; struct pri_subcommands *subcmds; q931_call *call; } pri_event_notify; typedef struct pri_event_keypad_digit { int e; int channel; q931_call *call; char digits[64]; struct pri_subcommands *subcmds; } pri_event_keypad_digit; typedef struct pri_event_service { int e; int channel; int changestatus; } pri_event_service; typedef struct pri_event_service_ack { int e; int channel; int changestatus; } pri_event_service_ack; struct pri_event_hold { int e; int channel; q931_call *call; struct pri_subcommands *subcmds; }; struct pri_event_hold_ack { int e; int channel; q931_call *call; struct pri_subcommands *subcmds; }; struct pri_event_hold_rej { int e; int channel; q931_call *call; int cause; struct pri_subcommands *subcmds; }; struct pri_event_retrieve { int e; int channel; q931_call *call; int flexible; /* Are we flexible with our channel selection? */ struct pri_subcommands *subcmds; }; struct pri_event_retrieve_ack { int e; int channel; q931_call *call; struct pri_subcommands *subcmds; }; struct pri_event_retrieve_rej { int e; int channel; q931_call *call; int cause; struct pri_subcommands *subcmds; }; struct pri_event_connect_ack { int e; int channel; q931_call *call; struct pri_subcommands *subcmds; }; typedef union { int e; pri_event_generic gen; /* Generic view */ pri_event_restart restart; /* Restart view */ pri_event_error err; /* Error view */ pri_event_facname facname; /* Caller*ID Name on Facility (Deprecated, use pri_event.facility) */ pri_event_ring ring; /* Ring */ pri_event_hangup hangup; /* Hang up */ pri_event_ringing ringing; /* Ringing */ pri_event_answer answer; /* Answer */ pri_event_restart_ack restartack; /* Restart Acknowledge */ pri_event_proceeding proceeding; /* Call proceeding & Progress */ pri_event_setup_ack setup_ack; /* SETUP_ACKNOWLEDGE structure */ pri_event_notify notify; /* Notification */ pri_event_keypad_digit digit; /* Digits that come during a call */ pri_event_service service; /* service message */ pri_event_service_ack service_ack; /* service acknowledgement message */ struct pri_event_facility facility; struct pri_event_hold hold; struct pri_event_hold_ack hold_ack; struct pri_event_hold_rej hold_rej; struct pri_event_retrieve retrieve; struct pri_event_retrieve_ack retrieve_ack; struct pri_event_retrieve_rej retrieve_rej; struct pri_event_connect_ack connect_ack; } pri_event; struct pri; struct pri_sr; #define PRI_IO_FUNCS /* Type declaration for callbacks to read or write a HDLC frame as below */ typedef int (*pri_io_cb)(struct pri *pri, void *buf, int buflen); /* Create a D-channel on a given file descriptor. The file descriptor must be a channel operating in HDLC mode with FCS computed by the fd's driver. Also it must be NON-BLOCKING! Frames received on the fd should include FCS. Nodetype must be one of PRI_NETWORK or PRI_CPE. switchtype should be PRI_SWITCH_* */ struct pri *pri_new(int fd, int nodetype, int switchtype); struct pri *pri_new_bri(int fd, int ptpmode, int nodetype, int switchtype); /* Create D-channel just as above with user defined I/O callbacks and data */ struct pri *pri_new_cb(int fd, int nodetype, int switchtype, pri_io_cb io_read, pri_io_cb io_write, void *userdata); /* Create BRI D-channel just as above with user defined I/O callbacks and data */ struct pri *pri_new_bri_cb(int fd, int ptpmode, int nodetype, int switchtype, pri_io_cb io_read, pri_io_cb io_write, void *userdata); /* Retrieve the user data associated with the D channel */ void *pri_get_userdata(struct pri *pri); /* Set the user data associated with the D channel */ void pri_set_userdata(struct pri *pri, void *userdata); /* Set Network Specific Facility for PRI */ void pri_set_nsf(struct pri *pri, int nsf); /* Set debug parameters on PRI -- see above debug definitions */ void pri_set_debug(struct pri *pri, int debug); /* Get debug parameters on PRI -- see above debug definitions */ int pri_get_debug(struct pri *pri); #define PRI_FACILITY_ENABLE /* Enable transmission support of Facility IEs on the pri */ void pri_facility_enable(struct pri *pri); /* Run PRI on the given D-channel, taking care of any events that need to be handled. If block is set, it will block until an event occurs which needs to be handled */ pri_event *pri_dchannel_run(struct pri *pri, int block); /* Check for an outstanding event on the PRI */ pri_event *pri_check_event(struct pri *pri); /* Give a name to a given event ID */ char *pri_event2str(int id); /* Give a name to a node type */ char *pri_node2str(int id); /* Give a name to a switch type */ char *pri_switch2str(int id); /* Print an event */ void pri_dump_event(struct pri *pri, pri_event *e); /* Turn presentation into a string */ char *pri_pres2str(int pres); /* Turn numbering plan into a string */ char *pri_plan2str(int plan); /* Turn cause into a string */ char *pri_cause2str(int cause); /*! * \brief Convert the given facility error code to a descriptive string. * * \param facility_error_code Error code to convert to a string. * * \return Descriptive error string. */ const char *pri_facility_error2str(int facility_error_code); /*! * \brief Convert the given facility reject code to a descriptive string. * * \param facility_reject_code Error code to convert to a string. * * \return Descriptive reject string. */ const char *pri_facility_reject2str(int facility_reject_code); /*! * \brief Send the ALERTING message. * * \param pri D channel controller. * \param call Q.931 call leg. * \param channel Encoded channel id to use. If zero do not change channel id. * \param info Nonzero to include a progress ie indicating inband audio available (ie ringback). * * \retval 0 on success. * \retval -1 on error. */ int pri_acknowledge(struct pri *pri, q931_call *call, int channel, int info); /* Send a digit in overlap mode */ int pri_information(struct pri *pri, q931_call *call, char digit); #define PRI_KEYPAD_FACILITY_TX /* Send a keypad facility string of digits */ int pri_keypad_facility(struct pri *pri, q931_call *call, const char *digits); /*! * \brief Send the SETUP_ACKNOWLEDGE message. * * \param pri D channel controller. * \param call Q.931 call leg. * \param channel Encoded channel id to use. If zero do not change channel id. * \param nonisdn Nonzero to include a progress ie indicating non-end-to-end-ISDN. * * \retval 0 on success. * \retval -1 on error. */ int pri_need_more_info(struct pri *pri, q931_call *call, int channel, int nonisdn); /*! * \brief Send the SETUP_ACKNOWLEDGE message. * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param channel Encoded channel id to use. If zero do not change channel id. * \param nonisdn Nonzero to include a progress ie indicating non-end-to-end-ISDN. * \param inband Nonzero to include a progress ie indicating inband audio available (ie dialtone). * * \retval 0 on success. * \retval -1 on error. */ int pri_setup_ack(struct pri *ctrl, q931_call *call, int channel, int nonisdn, int inband); /*! * \brief Send the CONNECT message. * * \param pri D channel controller. * \param call Q.931 call leg. * \param channel Encoded channel id to use. If zero do not change channel id. * \param nonisdn Nonzero to include a progress ie indicating non-end-to-end-ISDN. * * \retval 0 on success. * \retval -1 on error. */ int pri_answer(struct pri *pri, q931_call *call, int channel, int nonisdn); /*! * \brief Send the manual CONNECT_ACKNOWLEDGE message. * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param channel Selected channel to assign to the call waiting call. * Zero if do not include the channel id ie in the CONNECT_ACKNOWLEDGE message. * * \retval 0 on success. * \retval -1 on error. */ int pri_connect_ack(struct pri *ctrl, q931_call *call, int channel); /*! * \brief Set the manual CONNECT_ACKNOWLEDGE message enable flag. * * \param ctrl D channel controller. * \param enable TRUE to enable manual CONNECT_ACKNOWLEDGE message feature. * * \return Nothing */ void pri_connect_ack_enable(struct pri *ctrl, int enable); /*! * \brief Give connected line information to a call * \note Could be used instead of pri_sr_set_caller_party() before calling pri_setup(). */ int pri_connected_line_update(struct pri *pri, q931_call *call, const struct pri_party_connected_line *connected); /*! * \brief Give redirection information to a call * \note Could be used instead of pri_sr_set_redirecting_parties() before calling pri_setup(). */ int pri_redirecting_update(struct pri *pri, q931_call *call, const struct pri_party_redirecting *redirecting); /* Set CRV reference for GR-303 calls */ #undef pri_release #undef pri_disconnect /* backwards compatibility for those who don't use asterisk with libpri */ #define pri_release(a,b,c) \ pri_hangup(a,b,c) #define pri_disconnect(a,b,c) \ pri_hangup(a,b,c) /* Hangup a call */ #define PRI_HANGUP int pri_hangup(struct pri *pri, q931_call *call, int cause); /*! * \brief Set the call hangup fix enable flag. * * \param ctrl D channel controller. * \param enable TRUE to follow Q.931 Section 5.3.2 call hangup better. * FALSE for legacy behaviour. (Default FALSE if not called.) * * \return Nothing */ void pri_hangup_fix_enable(struct pri *ctrl, int enable); #define PRI_DESTROYCALL void pri_destroycall(struct pri *pri, q931_call *call); #define PRI_RESTART int pri_restart(struct pri *pri); int pri_reset(struct pri *pri, int channel); /* handle b-channel maintenance messages */ extern int pri_maintenance_service(struct pri *pri, int span, int channel, int changestatus); /* Create a new call */ q931_call *pri_new_call(struct pri *pri); /*! * \brief Deterimine if the given call control pointer is a dummy call. * * \retval TRUE if given call is a dummy call. * \retval FALSE otherwise. */ int pri_is_dummy_call(q931_call *call); /* Retrieve CRV reference for GR-303 calls. Returns >0 on success. */ int pri_get_crv(struct pri *pri, q931_call *call, int *callmode); /* Retrieve CRV reference for GR-303 calls. CRV must be >0, call mode should be 0 */ int pri_set_crv(struct pri *pri, q931_call *call, int crv, int callmode); /* How long until you need to poll for a new event */ struct timeval *pri_schedule_next(struct pri *pri); /* Run any pending schedule events */ extern pri_event *pri_schedule_run(struct pri *pri); extern pri_event *pri_schedule_run_tv(struct pri *pri, const struct timeval *now); int pri_call(struct pri *pri, q931_call *c, int transmode, int channel, int exclusive, int nonisdn, char *caller, int callerplan, char *callername, int callerpres, char *called, int calledplan, int ulayer1); struct pri_sr *pri_sr_new(void); void pri_sr_free(struct pri_sr *sr); int pri_sr_set_channel(struct pri_sr *sr, int channel, int exclusive, int nonisdn); int pri_sr_set_bearer(struct pri_sr *sr, int transmode, int userl1); int pri_sr_set_called(struct pri_sr *sr, char *called, int calledplan, int complete); /*! * \brief Set the caller party ID information in the call SETUP record. * * \param sr New call SETUP record. * \param caller Caller party ID information to set. * * \return Nothing */ void pri_sr_set_caller_party(struct pri_sr *sr, const struct pri_party_id *caller); /*! \note Use pri_sr_set_caller_party() instead to pass more precise caller information. */ int pri_sr_set_caller(struct pri_sr *sr, char *caller, char *callername, int callerplan, int callerpres); /*! * \brief Set the calling subaddress information in the call SETUP record. * * \param sr New call SETUP record. * \param subaddress information to set. * * \return Nothing */ void pri_sr_set_caller_subaddress(struct pri_sr *sr, const struct pri_party_subaddress *subaddress); /*! * \brief Set the called subaddress information in the call SETUP record. * * \param sr New call SETUP record. * \param subaddress information to set. * * \return Nothing */ void pri_sr_set_called_subaddress(struct pri_sr *sr, const struct pri_party_subaddress *subaddress); /*! * \brief Set the redirecting information in the call SETUP record. * * \param sr New call SETUP record. * \param caller Redirecting information to set. * * \return Nothing */ void pri_sr_set_redirecting_parties(struct pri_sr *sr, const struct pri_party_redirecting *redirecting); /*! \note Use pri_sr_set_redirecting_parties() instead to pass more precise redirecting information. */ int pri_sr_set_redirecting(struct pri_sr *sr, char *num, int plan, int pres, int reason); /*! * \brief Set the keypad digits in the call SETUP record. * * \param sr New call SETUP record. * \param keypad_digits Keypad digits to send. * * \return Nothing */ void pri_sr_set_keypad_digits(struct pri_sr *sr, const char *keypad_digits); #define PRI_USER_USER_TX /* Set the user user field. Warning! don't send binary data accross this field */ void pri_sr_set_useruser(struct pri_sr *sr, const char *userchars); void pri_sr_set_reversecharge(struct pri_sr *sr, int requested); void pri_call_set_useruser(q931_call *sr, const char *userchars); int pri_setup(struct pri *pri, q931_call *call, struct pri_sr *req); /*! * \brief Set a call as a call indpendent signalling connection (i.e. no bchan) * \note Call will automaticlly disconnect after signalling sent. */ int pri_sr_set_connection_call_independent(struct pri_sr *req); /*! * \brief Set a call as a call indpendent signalling connection (i.e. no bchan) * \note Call will stay connected until explicitly disconnected. */ int pri_sr_set_no_channel_call(struct pri_sr *req); /* Send an MWI indication to a remote location. If activate is non zero, activates, if zero, deactivates */ int pri_mwi_activate(struct pri *pri, q931_call *c, char *caller, int callerplan, char *callername, int callerpres, char *called, int calledplan); /* Send an MWI deactivate request to a remote location */ int pri_mwi_deactivate(struct pri *pri, q931_call *c, char *caller, int callerplan, char *callername, int callerpres, char *called, int calledplan); /*! * \brief Send a MWI indication on the specified D channel. * * \param ctrl D channel controller. * \param mailbox Party receiving notification. * \param basic_service Basic service enum (-1 if not present). * \param num_messages NumberOfMessages (-1 if not present). * \param caller_id Party leaving message (NULL if not present). * \param timestamp When message left. (Generalized Time format, NULL if not present) * \param message_reference Message reference number (-1 if not present). * \param message_status Message status: added(0), removed(1). * * \retval 0 on success. * \retval -1 on error. */ int pri_mwi_indicate(struct pri *ctrl, const struct pri_party_id *mailbox, int basic_service, int num_messages, const struct pri_party_id *caller_id, const char *timestamp, int message_reference, int message_status); /*! * \brief Send a MWI indication on the specified D channel. (Take two) * * \param ctrl D channel controller. * \param mailbox Party receiving notification. * \param vm_id Voicemail system number (NULL if not present). * \param basic_service Basic service enum (-1 if not present). * \param num_messages NumberOfMessages (-1 if not present). * \param caller_id Party leaving message (NULL if not present). * \param timestamp When message left. (Generalized Time format, NULL if not present) * \param message_reference Message reference number (-1 if not present). * \param message_status Message status: added(0), removed(1). * * \retval 0 on success. * \retval -1 on error. */ int pri_mwi_indicate_v2(struct pri *ctrl, const struct pri_party_id *mailbox, const struct pri_party_id *vm_id, int basic_service, int num_messages, const struct pri_party_id *caller_id, const char *timestamp, int message_reference, int message_status); /* Set service message support flag */ int pri_set_service_message_support(struct pri *pri, int supportflag); #define PRI_2BCT /* Attempt to pass the channels back to the NET side if compatable and * subscribed. Sometimes called 2 bchannel transfer (2BCT) */ int pri_channel_bridge(q931_call *call1, q931_call *call2); /* Override message and error stuff */ #define PRI_NEW_SET_API void pri_set_message(void (*__pri_error)(struct pri *pri, char *)); void pri_set_error(void (*__pri_error)(struct pri *pri, char *)); /* Set overlap mode */ #define PRI_SET_OVERLAPDIAL void pri_set_overlapdial(struct pri *pri,int state); /* QSIG logical channel mapping option, do not skip channel 16 */ #define PRI_SET_CHAN_MAPPING_LOGICAL void pri_set_chan_mapping_logical(struct pri *pri, int state); #define PRI_DUMP_INFO_STR char *pri_dump_info_str(struct pri *pri); /* Get file descriptor */ int pri_fd(struct pri *pri); #define PRI_PROGRESS /* Send progress */ int pri_progress(struct pri *pri, q931_call *c, int channel, int info); /* Send progress with cause IE */ int pri_progress_with_cause(struct pri *pri, q931_call *c, int channel, int info, int cause); #define PRI_PROCEEDING_FULL /*! * \brief Send the PROCEEDING message. * * \param pri D channel controller. * \param c Q.931 call leg. * \param channel Encoded channel id to use. If zero do not change channel id. * \param info Nonzero to include a progress ie indicating inband audio available. * * \retval 0 on success. * \retval -1 on error. */ int pri_proceeding(struct pri *pri, q931_call *c, int channel, int info); /* Enable inband progress when a DISCONNECT is received */ void pri_set_inbanddisconnect(struct pri *pri, unsigned int enable); /* Enslave a PRI to another, so they share the same call list (and maybe some timers) */ void pri_enslave(struct pri *master, struct pri *slave); /*! * \brief Request AOC on call setup * * \param call setup struct to set charging request info on * \param charging request to set on setup struct * * \retval 0 on success * \retval -1 on failure */ int pri_sr_set_aoc_charging_request(struct pri_sr *sr, int charging_request); /*! * \brief Send AOC Request Response to a request for AOC-S * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param invoke_id for response message * \param aoc_s message for response * * \retval 0 on success * \retval -1 on failure */ int pri_aoc_s_request_response_send(struct pri *ctrl, q931_call *call, int invoke_id, const struct pri_subcmd_aoc_s *aoc_s); /*! * \brief Send AOC Request Response to a request for AOC-D or AOC-E * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param response in form of enum PRI_AOC_REQ_RSP * \param invoke_id for response message * * \retval 0 on success * \retval -1 on failure */ int pri_aoc_de_request_response_send(struct pri *ctrl, q931_call *call, int response, int invoke_id); /*! * \brief Send AOC-S message. * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param aoc_s message to send * * \retval 0 on success * \retval -1 on failure */ int pri_aoc_s_send(struct pri *ctrl, q931_call *c, const struct pri_subcmd_aoc_s *aoc_s); /*! * \brief Send AOC-D message. * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param aoc_d message to send * * \retval 0 on success * \retval -1 on failure */ int pri_aoc_d_send(struct pri *ctrl, q931_call *c, const struct pri_subcmd_aoc_d *aoc_d); /*! * \brief Send AOC-E message. * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param aoc_e message to send * * \retval 0 on success * \retval -1 on failure */ int pri_aoc_e_send(struct pri *ctrl, q931_call *c, const struct pri_subcmd_aoc_e *aoc_e); #define PRI_GR303_SUPPORT #define PRI_ENSLAVE_SUPPORT #define PRI_SETUP_CALL #define PRI_RECEIVE_SUBADDR #define PRI_REDIRECTING_REASON #define PRI_AOC_UNITS #define PRI_ANI /* Send notification */ int pri_notify(struct pri *pri, q931_call *c, int channel, int info); int pri_callrerouting_facility(struct pri *pri, q931_call *call, const char *dest, const char* original, const char* reason); /*! * \brief Set the call deflection/rerouting feature enable flag. * * \param ctrl D channel controller. * \param enable TRUE to enable call deflection/rerouting feature. * * \return Nothing */ void pri_reroute_enable(struct pri *ctrl, int enable); /*! * \brief Send the CallRerouting/CallDeflection message. * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param caller Call rerouting/deflecting updated caller data. (NULL if data not updated.) * \param deflection Call rerouting/deflecting redirection data. * \param subscription_option Diverting user subscription option to specify if caller is notified. * * \note * deflection->to is the new called number and must always be present. * \note * subscription option: * noNotification(0), * notificationWithoutDivertedToNr(1), * notificationWithDivertedToNr(2) * * \retval 0 on success. * \retval -1 on error. */ int pri_reroute_call(struct pri *ctrl, q931_call *call, const struct pri_party_id *caller, const struct pri_party_redirecting *deflection, int subscription_option); enum PRI_REROUTING_RSP_CODE { /*! * Rerouting invocation accepted and the network provider option * "served user call retention on invocation of diversion" * is "clear call on invocation". */ PRI_REROUTING_RSP_OK_CLEAR, /*! * Rerouting invocation accepted and the network provider option * "served user call retention on invocation of diversion" * is "retain call until alerting begins at the deflected-to user". */ PRI_REROUTING_RSP_OK_RETAIN, PRI_REROUTING_RSP_NOT_SUBSCRIBED, PRI_REROUTING_RSP_NOT_AVAILABLE, /*! Supplementary service interaction not allowed. */ PRI_REROUTING_RSP_NOT_ALLOWED, PRI_REROUTING_RSP_INVALID_NUMBER, /*! Deflection to prohibited number (e.g., operator, police, emergency). */ PRI_REROUTING_RSP_SPECIAL_SERVICE_NUMBER, /*! Deflection to served user number. */ PRI_REROUTING_RSP_DIVERSION_TO_SELF, PRI_REROUTING_RSP_MAX_DIVERSIONS_EXCEEDED, PRI_REROUTING_RSP_RESOURCE_UNAVAILABLE, }; /*! * \brief Send the CallRerouteing/CallDeflection response message. * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param invoke_id Value given by the initiating request. * \param code The result to send. * * \retval 0 on success. * \retval -1 on error. */ int pri_rerouting_rsp(struct pri *ctrl, q931_call *call, int invoke_id, enum PRI_REROUTING_RSP_CODE code); /*! * \brief Set the call transfer feature enable flag. * * \param ctrl D channel controller. * \param enable TRUE to enable call transfer feature. * * \return Nothing */ void pri_transfer_enable(struct pri *ctrl, int enable); /*! * \brief Send the call transfer response message. * * \param ctrl D channel controller. * \param call Q.931 call leg. * \param invoke_id Value given by the initiating request. * \param is_successful TRUE if the transfer was successful. * * \retval 0 on success. * \retval -1 on error. */ int pri_transfer_rsp(struct pri *ctrl, q931_call *call, int invoke_id, int is_successful); /*! * \brief Set the advice of charge events feature enable flag. * * \param ctrl D channel controller. * \param enable TRUE to enable AOC events feature. * * \return Nothing */ void pri_aoc_events_enable(struct pri *ctrl, int enable); enum pri_layer2_persistence { PRI_L2_PERSISTENCE_DEFAULT, /*! Immediately bring layer 2 back up if the peer brings layer 2 down. */ PRI_L2_PERSISTENCE_KEEP_UP, /*! Leave layer 2 down if the peer brings layer 2 down. */ PRI_L2_PERSISTENCE_LEAVE_DOWN, #if 0 /* Possible future option. Would need to define how long to idle before dropping. */ /*! Drop layer 2 on D channel idle. */ PRI_L2_PERSISTENCE_IDLE_DROP, #endif }; /*! * \brief Set the layer2 persistence option. * * \param ctrl D channel controller. * \param option Layer 2 persistence to apply. * * \note * Not all values are supported by all modes. * * \return Nothing */ void pri_persistent_layer2_option(struct pri *ctrl, enum pri_layer2_persistence option); #define PRI_DISPLAY_OPTION_BLOCK (1 << 0) /*!< Do not pass display text. */ #define PRI_DISPLAY_OPTION_NAME_INITIAL (1 << 1) /*!< Use display in SETUP/CONNECT for name. */ #define PRI_DISPLAY_OPTION_NAME_UPDATE (1 << 2) /*!< Use display in FACILITY/NOTIFY for COLP name if appropriate. */ #define PRI_DISPLAY_OPTION_TEXT (1 << 3) /*!< Pass arbitrary display text in INFORMATION messages during call. */ /*! * \brief Set the display ie send policy options. * * \param ctrl D channel controller. * \param flags Option flags to apply. * * \note * If no flags set then legacy default behaviour. * * \note * Not all options are supported by all switches. * * \return Nothing */ void pri_display_options_send(struct pri *ctrl, unsigned long flags); /*! * \brief Set the display ie receive policy options. * * \param ctrl D channel controller. * \param flags Option flags to apply. * * \note * If no flags set then legacy default behaviour. * * \note * Not all options are supported by all switches. * * \return Nothing */ void pri_display_options_receive(struct pri *ctrl, unsigned long flags); /*! * \brief Send display text during a call. * * \param ctrl D channel controller. * \param call Q.931 call leg * \param display Display text to send. * * \retval 0 on success. * \retval -1 on error. */ int pri_display_text(struct pri *ctrl, q931_call *call, const struct pri_subcmd_display_txt *display); /*! * \brief Set the call hold feature enable flag. * * \param ctrl D channel controller. * \param enable TRUE to enable call hold feature. * * \return Nothing */ void pri_hold_enable(struct pri *ctrl, int enable); /*! * \brief Send the HOLD message. * * \param ctrl D channel controller. * \param call Q.931 call leg * * \retval 0 on success. * \retval -1 on error. */ int pri_hold(struct pri *ctrl, q931_call *call); /*! * \brief Send the HOLD ACKNOWLEDGE message. * * \param ctrl D channel controller. * \param call Q.931 call leg * * \retval 0 on success. * \retval -1 on error. */ int pri_hold_ack(struct pri *ctrl, q931_call *call); /*! * \brief Send the HOLD REJECT message. * * \param ctrl D channel controller. * \param call Q.931 call leg * \param cause Q.931 cause code for rejecting the hold request. * * \retval 0 on success. * \retval -1 on error. */ int pri_hold_rej(struct pri *ctrl, q931_call *call, int cause); /*! * \brief Send the RETRIEVE message. * * \param ctrl D channel controller. * \param call Q.931 call leg * \param channel Encoded channel id to use. If zero do not send channel id. * * \retval 0 on success. * \retval -1 on error. */ int pri_retrieve(struct pri *ctrl, q931_call *call, int channel); /*! * \brief Send the RETRIEVE ACKNOWLEDGE message. * * \param ctrl D channel controller. * \param call Q.931 call leg * \param channel Encoded channel id to use. * * \retval 0 on success. * \retval -1 on error. */ int pri_retrieve_ack(struct pri *ctrl, q931_call *call, int channel); /*! * \brief Send the RETRIEVE REJECT message. * * \param ctrl D channel controller. * \param call Q.931 call leg * \param cause Q.931 cause code for rejecting the retrieve request. * * \retval 0 on success. * \retval -1 on error. */ int pri_retrieve_rej(struct pri *ctrl, q931_call *call, int cause); #if defined(STATUS_REQUEST_PLACE_HOLDER) int pri_status_req(struct pri *ctrl, int request_id, const struct pri_sr *req); void pri_status_req_rsp(struct pri *ctrl, int invoke_id, int status); #endif /* defined(STATUS_REQUEST_PLACE_HOLDER) */ /*! * \brief Set the Malicious Call ID feature enable flag. * * \param ctrl D channel controller. * \param enable TRUE to enable MCID feature. * * \return Nothing */ void pri_mcid_enable(struct pri *ctrl, int enable); /*! * \brief Send the MCID request message. * * \param ctrl D channel controller. * \param call Q.931 call leg * * \retval 0 on success. You should wait for a PRI_SUBCMD_MCID_RSP * to continue clearing the call if it was in progress. * \retval -1 on error. */ int pri_mcid_req_send(struct pri *ctrl, q931_call *call); /*! * \brief Set the call completion feature enable flag. * * \param ctrl D channel controller. * \param enable TRUE to enable call completion feature. * * \return Nothing */ void pri_cc_enable(struct pri *ctrl, int enable); /*! * \brief Set the PTMP NT call completion recall mode. * * \param ctrl D channel controller. * \param mode globalRecall(0), specificRecall(1) * * \return Nothing */ void pri_cc_recall_mode(struct pri *ctrl, int mode); /*! * \brief Set the Q.SIG call completion signaling link retention mode. * (Requestor/Initiator/Originator/Party-A) * * \param ctrl D channel controller. * \param signaling_retention release(0), retain(1), do-not-care(2). * * \return Nothing */ void pri_cc_retain_signaling_req(struct pri *ctrl, int signaling_retention); /*! * \brief Set the Q.SIG call completion signaling link retention mode. * (Responder/Answerer/Party-B) * * \param ctrl D channel controller. * \param signaling_retention release(0), retain(1). * * \return Nothing */ void pri_cc_retain_signaling_rsp(struct pri *ctrl, int signaling_retention); long pri_cc_available(struct pri *ctrl, q931_call *call); int pri_cc_req(struct pri *ctrl, long cc_id, int mode); int pri_cc_req_rsp(struct pri *ctrl, long cc_id, int status); void pri_cc_remote_user_free(struct pri *ctrl, long cc_id); void pri_cc_b_free(struct pri *ctrl, long cc_id); void pri_cc_stop_alerting(struct pri *ctrl, long cc_id); void pri_cc_status_req(struct pri *ctrl, long cc_id); void pri_cc_status_req_rsp(struct pri *ctrl, long cc_id, int status); void pri_cc_status(struct pri *ctrl, long cc_id, int status); int pri_cc_call(struct pri *ctrl, long cc_id, q931_call *call, struct pri_sr *req); void pri_cc_cancel(struct pri *ctrl, long cc_id); /* Date/time ie send policy option values. */ #define PRI_DATE_TIME_SEND_DEFAULT 0 /*!< Send date/time ie default. */ #define PRI_DATE_TIME_SEND_NO 1 /*!< Send date/time ie never. */ #define PRI_DATE_TIME_SEND_DATE 2 /*!< Send date/time ie date only. */ #define PRI_DATE_TIME_SEND_DATE_HH 3 /*!< Send date/time ie date and hour. */ #define PRI_DATE_TIME_SEND_DATE_HHMM 4 /*!< Send date/time ie date, hour, and minute. */ #define PRI_DATE_TIME_SEND_DATE_HHMMSS 5 /*!< Send date/time ie date, hour, minute, and second. */ /*! * \brief Set the date/time ie send policy option. * * \param ctrl D channel controller. * \param option Policy option to set. * * \note * Only valid in NT mode. * * \return Nothing */ void pri_date_time_send_option(struct pri *ctrl, int option); /* Get/Set PRI Timers */ #define PRI_GETSET_TIMERS int pri_set_timer(struct pri *pri, int timer, int value); int pri_get_timer(struct pri *pri, int timer); int pri_timer2idx(const char *timer_name); /*! New configurable timers and counters must be added to the end of the list */ enum PRI_TIMERS_AND_COUNTERS { PRI_TIMER_N200, /*!< Maximum numer of Q.921 retransmissions */ PRI_TIMER_N201, /*!< Maximum numer of octets in an information field */ PRI_TIMER_N202, /*!< Maximum numer of transmissions of the TEI identity request message */ PRI_TIMER_K, /*!< Maximum number of outstanding I-frames */ PRI_TIMER_T200, /*!< Time between SABME's */ PRI_TIMER_T201, /*!< Minimum time between retransmissions of the TEI Identity check messages */ PRI_TIMER_T202, /*!< Minimum time between transmission of TEI Identity request messages */ PRI_TIMER_T203, /*!< Maximum time without exchanging packets */ PRI_TIMER_T300, PRI_TIMER_T301, /*!< Maximum time to respond to an ALERT */ PRI_TIMER_T302, PRI_TIMER_T303, /*!< Maximum time to wait after sending a SETUP without a response */ PRI_TIMER_T304, PRI_TIMER_T305, /*!< Wait for DISCONNECT acknowledge */ PRI_TIMER_T306, PRI_TIMER_T307, PRI_TIMER_T308, /*!< Wait for RELEASE acknowledge */ PRI_TIMER_T309, /*!< Time active calls can tollerate data link layer being down before clearing. */ PRI_TIMER_T310, /*!< Maximum time between receiving a CALL_PROCEEDING and receiving a ALERT/CONNECT/DISCONNECT/PROGRESS */ PRI_TIMER_T313, /*!< Wait for CONNECT acknowledge, CPE side only */ PRI_TIMER_T314, PRI_TIMER_T316, /*!< Time to wait for a RESTART ACK before retransmitting RESTART. (Timer enabled if greater than zero.) */ PRI_TIMER_T317, PRI_TIMER_T318, PRI_TIMER_T319, PRI_TIMER_T320, PRI_TIMER_T321, PRI_TIMER_T322, PRI_TIMER_TM20, /*!< Maximum time awaiting XID response */ PRI_TIMER_NM20, /*!< Number of XID retransmits */ PRI_TIMER_T_HOLD, /*!< Maximum time to wait for HOLD request response. */ PRI_TIMER_T_RETRIEVE, /*!< Maximum time to wait for RETRIEVE request response. */ PRI_TIMER_T_RESPONSE, /*!< Maximum time to wait for a typical APDU response. */ PRI_TIMER_T_STATUS, /*!< Max time to wait for all replies to check for compatible terminals */ PRI_TIMER_T_ACTIVATE, /*!< Request supervision timeout. */ PRI_TIMER_T_DEACTIVATE, /*!< Deactivate supervision timeout. */ PRI_TIMER_T_INTERROGATE,/*!< Interrogation supervision timeout. */ /* ETSI call-completion timers */ PRI_TIMER_T_RETENTION, /*!< Max time to wait for user A to activate call-completion. */ PRI_TIMER_T_CCBS1, /*!< T-STATUS timer equivalent for CC user A status. */ PRI_TIMER_T_CCBS2, /*!< Max time the CCBS service will be active */ PRI_TIMER_T_CCBS3, /*!< Max time to wait for user A to respond to user B availability. */ PRI_TIMER_T_CCBS4, /*!< CC user B guard time before sending CC recall indication. */ PRI_TIMER_T_CCBS5, /*!< Network B CCBS supervision timeout. */ PRI_TIMER_T_CCBS6, /*!< Network A CCBS supervision timeout. */ PRI_TIMER_T_CCNR2, /*!< Max time the CCNR service will be active */ PRI_TIMER_T_CCNR5, /*!< Network B CCNR supervision timeout. */ PRI_TIMER_T_CCNR6, /*!< Network A CCNR supervision timeout. */ /* Q.SIG call-completion timers */ PRI_TIMER_QSIG_CC_T1, /*!< CC request supervision timeout. */ PRI_TIMER_QSIG_CCBS_T2, /*!< CCBS supervision timeout. */ PRI_TIMER_QSIG_CCNR_T2, /*!< CCNR supervision timeout. */ PRI_TIMER_QSIG_CC_T3, /*!< Max time to wait for user A to respond to user B availability. */ PRI_TIMER_QSIG_CC_T4, /*!< Path reservation supervision timeout. */ PRI_TIMER_T312, /*!< Supervise broadcast SETUP message call reference retention. */ PRI_TIMER_N316, /*!< Number of times to transmit RESTART before giving up if T316 enabled. */ /* Must be last in the enum list */ PRI_MAX_TIMERS }; /* Get PRI version */ const char *pri_get_version(void); #endif