* Debug output for a sent Q.931 message in TE PTMP now uses the best
available TEI number instead of always using 127. It could still be wrong
if layer 2 does not have a TEI assigned.
* Q.921 debug output is grouped better so a decoded message is not split
by a blank line.
* The Q.921 state is also decoded to a name.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1848 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The context tagging for my editor is much happier now that the struct and
the variable do not have the same name. (At least for this file.)
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1842 2fbb986a-6c06-0410-b554-c9c1f0a7f128
There currently exists a pri_new_cb() API call that allows you to create a
PRI with user-defined I/O read and write callbacks, and option userdata.
Add the same capability for BRI interfaces by adding a pri_new_bri_cb()
API function.
(closes issue #16477)
Reported by: nic_bellamy
Patches:
pri_new_bri_cb_api.patch uploaded by nic bellamy (license 299) (with minor cosmetic changes)
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1836 2fbb986a-6c06-0410-b554-c9c1f0a7f128
pritest hadn't been ported to DAHDI, made the trivial changes to make it
work. (I haven't found the equivalent to zap_playf, so changed the
behaviour to an echo box)
(closes issue #17274)
Reported by: horape
Patches:
pritest.diff uploaded by horape (license 1035) (with minor cosmetic changes)
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1833 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The alternate form of the Q.SIG Name sequence that allows manufacturer
extensions for CallingName, CalledName, ConnectedName, and BusyName was
not consuming the next ASN.1 tag. The code that processed the ASN.1 Name
structure was then using a stale tag value. The stale tag value was then
rejected with the "Did not expect" message.
I have added a test case using the supplied PRI debug output to the
rosetest utility to verify that this alternate encoding is tested in the
future.
(closes issue #17619)
Reported by: jims8650
Patches:
issue17619_v1.4.11.3.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1828 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Restored the old behaviour if there is more than one calling number in the
incoming SETUP message. A network provided number is reported as ANI.
(closes issue #17495)
Reported by: ibercom
Patches:
issue_17495_v1.4.11.2.patch uploaded by rmudgett (license 664)
issue_17495_v1.4.patch uploaded by rmudgett (license 664)
Tested by: ibercom
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1823 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The switch is sending the Connected Address ie (12) and there was no
handler for that ie. That is why the reporter was getting the "Missing
mandatory ie" message.
The simple fix is to just add the missing receive handler for that ie.
Since connected line (COLP) functionality has been added and this is just
an alternate for the Connected Number ie (0x4C), the handler was already
written. I also changed the ie name to what Q.931 calls it: Connected
Address.
Also some minor code clean up in q931_handle_ie() and ie2str().
JIRA SWP-1678
(closes issue #16915)
Reported by: kobaz
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1818 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Q.SIG can send the CallingName, CalledName, and ConnectedName in stand
alone FACILITY messages. If the CallingName was not sent in the SETUP
message, the caller id name was not reported to the upper layer.
(closes issue #17458)
Reported by: jsmith
Patches:
issue17458_post_qsig_name.patch uploaded by rmudgett (license 664)
issue17458_post_qsig_name_v1.4.11.1.patch uploaded by rmudgett (license 664)
Tested by: rmudgett, jsmith
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1810 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The acceptinbanddisconnect flag is not inherited when creating a new TEI
and thus rendering the setting (and its respective equivalent in Asterisk)
a no-op on BRI setups.
(closes issue #15265)
Reported by: paravoid
Patches:
inband-bri.diff uploaded by paravoid (license 200)
Tested by: paravoid
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1794 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The code was only processing the first ROSE component in the facility
message. I also updated rosetest.c to have a multiple component ROSE
message test.
(closes issue #17428)
Reported by: patrol-cz
Patches:
issue17428.patch uploaded by rmudgett (license 664)
Tested by: rmudgett, patrol-cz
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1785 2fbb986a-6c06-0410-b554-c9c1f0a7f128
This feature passes ETSI AOC-S, AOC-D, and AOC-E message information to
the upper layer (i.e. Asterisk) for processing.
Relevant specification: EN 300 182
Consideration was made for the possible future addition of Q.SIG AOC
support (ECMA-212) with the events passed to the upper layer.
Review: https://reviewboard.asterisk.org/r/538/
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1737 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Added ability to send and receive ETSI ECT messages to eliminate tromboned
calls.
Added ETSI support to an existing API call to send ECT messages when the
upper level indicates to transfer specified calls.
The libpri API was extended to indicate to the upper layer that the far
end requests the transfer of the indicated calls.
Review: https://reviewboard.asterisk.org/r/521/
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1723 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Call Completion Supplementary Service (CCSS) added for the following
switch types: ETSI PTMP, ETSI PTP, Q.SIG.
Specifications:
ETS 300 359 CCBS for PTMP and PTP
ETS 301 065 CCNR for PTMP and PTP
ECMA-186 Call Completion for Q.SIG
Several support services were added to support CC:
Dummy Call Reference.
Q.931 REGISTER message.
Dynamic expansion of the number of available timers (up to 8192).
Enhanced facility message handling.
Current implementation limitations preclude the following:
CC service retention is not supported.
Q.SIG path reservation is not supported.
(closes issue #14292)
Reported by: tomaso
Tested by: rmudgett
JIRA SWP-1493
Review: https://reviewboard.asterisk.org/r/522/
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1714 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Revision -r1489 corrected a deviation from Q.931 Section 5.3.2. However,
this resulted in an unexpected behaviour change to the upper layer
(Asterisk).
This change restores the legacy hangup behaviour if the new API call is
not used. Use pri_hangup_fix_enable() to follow Q.931 Section 5.3.2 call
hangup better.
(closes issue #17104)
Reported by: shawkris
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1688 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The DAHDI driver had a bug where an extra byte appeared on the end of
Q.931 messages. This garbage byte caused the message to be discarded with
the diagnostic "XXX Message longer than it should be?? XXX". The Q.931
message will no longer be discarded if there were earlier ie's in the
message.
This patch also addresses the potential problem of reading beyond the
buffer when trying to parse the garbage data.
Thanks to roeften for the base patch.
(closes issue #14378)
Reported by: timking
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1674 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Since the TE side can pick CR values independently, the TE CR needs to be
qualified by TEI to distinguish CR values from other devices. Without
doing this, multiple phones on the BRI line will have intermittent call
failures.
JIRA LIBPRI-30
Also eliminated some wierdness in q931_status() and several places where
it is called.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1630 2fbb986a-6c06-0410-b554-c9c1f0a7f128
1) Make PRI_MASTER() no longer check for a NULL parameter. It is the
caller's responsibility. Not many callers could have passed a NULL
without crashing before or after anyway.
2) Replace calls to q931_is_ptmp() with PTMP_MODE(). They were
equivalent.
3) Made the following boolean config options bit fields: sendfacility,
overlapdial, chan_mapping_logical, and service_message_support.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1534 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The Q.921 rewrite only used value of PRI_TIMER_K right after it was set to
the default. The Q.921 window size was thus no longer alterable by the
user.
(closes issue #16909)
Reported by: alecdavis
Patches:
pritimer.libpri.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1511 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Q.931 Section 5.3.2 a) says we send a RELEASE_COMPLETE to reject a call
SETUP if we have not already sent a message in response to the SETUP
message.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1489 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Only the NT PTMP side can send Q.931 broadcast messages.
Also removed an inaccurate comment in Q.921 and made
q921_mdl_handle_error_callback() call the correct struct pri free
function.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1426 2fbb986a-6c06-0410-b554-c9c1f0a7f128
A recent change to Asterisk put the span number at the begining of each
line. This is a good thing if you need to debug multiple spans or forget
which span you are debugging. Unfortunately, any pri_message() output
that is not a complete line is messed up.
The pri_message() function now will accumulate line output until a '\n' is
seen on the end.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1351 2fbb986a-6c06-0410-b554-c9c1f0a7f128
