The caller would not get a busy indication when calling a busy phone.
Timer T303 is not supposed to be stopped when RELEASE_COMPLETE received.
When T303 expires we will now report the last clearing cause code to the
caller if we received one.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1255 2fbb986a-6c06-0410-b554-c9c1f0a7f128
* Added support for BRI PTMP NT mode. (Overlap dialing NT -> TE not supported.)
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
(closes issue #15048)
Tested by: rmudgett, mattf
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1242 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
libpri_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/406/
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1230 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Sending a STATUS message failed to include the call state ie for some
reason. We will now always send a call state ie when a message ie list
includes one.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1220 2fbb986a-6c06-0410-b554-c9c1f0a7f128
* Removed unnecessary Q931_IE_CONNECTED_NUM ie from setup_ack_ies[].
* Added internal state Q931_CALL_STATE_NOT_SET to Q.931 state enum.
* Made q931_is_ptmp() take a const pointer.
* pri_facility.c: Some preparations for subaddressing.
* pri.c: Eliminate use of a magic number.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1177 2fbb986a-6c06-0410-b554-c9c1f0a7f128
1) Outgoing messages have the facility ie ASN.1 decoded and dumped when the
ie is added to the message. The whole message is then dumped.
2) Incoming messages have the facility ie ASN.1 decoded and dumped when the
ie is processed. The whole message has already been dumped.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1169 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The problem is that once a call reference was associated with a particular D
channel, it always was. This created an issue with NFAS when the secondary D
channel became active as the messages were still being sent on the non-active
D channel.
(closes issue #14959)
Reported by: remiq
Patches:
bug14959.patch uploaded by jpeeler (license 325)
Tested by: remiq
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1120 2fbb986a-6c06-0410-b554-c9c1f0a7f128
This set of changes integrates SERVICE message support for the
'national' switchtype. The 'national' switchtype uses the 0x43
protocol discriminator. The 'national' SERVICE/SERVICE ACKNOWLEDGE
and AT&T SERVICE/SERVICE ACKNOWLEDGE message values are opposite
of each other. This is handled by first determining which
protocol discriminator is in use, then responding with the appropriate
SERVICE ACKNOWLEDGE value. AT&T SERVICE messages use the
0x3 protocol discriminator.
(closes issue #15803)
Reported by: dhubbard
Review: https://reviewboard.asterisk.org/r/347/
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1072 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Also make sure that service maintenance messages have the channel id
parameters reinitialized for each message since they are sent over the
global call reference.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@1051 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Add Connected Line Presentation (COLP) support to chan_dahdi/libpri as an
addition to issue 8824. This is the libpri portion. COLP support is now
available for ETSI PTP, ETSI PTMP, and Q.SIG with this patch.
(closes issue #14068)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/339/
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@982 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Add the ability to transmit a Reverse Charging Indication IE during a SETUP
message. In passing, re-work some of the receive logic to be forwards
compatible with new RCI values that may be added in the future. Also removed
the PRI_REVERSECHARGE_SUPPORT define that I added on the last commit since we
can just check for PRI_REVERSECHARGE_NONE or _REQUESTED on the Asterisk side to
determine support for this.
Special thanks to rmudgett who could have written this in half the time he spent
reviewing it, but instead talked me through it. Much appreciated!
(issue #13760)
Reported by: mrgabu
Review: https://reviewboard.asterisk.org/r/292/
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@907 2fbb986a-6c06-0410-b554-c9c1f0a7f128
The context tagging for my editor is much happier now that the struct and the
variable do not have the same name. (At least for this file.)
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@824 2fbb986a-6c06-0410-b554-c9c1f0a7f128
These API calls do not modify the string supplied, and should not be allowed to modify it, so this patch adds a 'const' qualifier to that argument to allow the compiler to enforce this restriction (and allow callers of the API that already have a 'const' pointer to be able to pass it to this API).
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@798 2fbb986a-6c06-0410-b554-c9c1f0a7f128
Made the q931_call record point to the master D channel control structure
instead of the BRI TEI subchannel control structure. When a layer 3 message
is sent, the current TEI subchannel control structure is used.
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@790 2fbb986a-6c06-0410-b554-c9c1f0a7f128
This adds support for two new message types: Service and Service Acknowledge.
When a channel receives a service message it will either take the channel in
or out of service and then send a service acknowledgment. Although not
enforced here (enforced in chan_dahdi), the service messages are only supported
with switch types 4ess/5ess. The required Asterisk changes will be coming next.
(issue #3450)
Reported by: cmaj
git-svn-id: https://origsvn.digium.com/svn/libpri/branches/1.4@732 2fbb986a-6c06-0410-b554-c9c1f0a7f128
