All new dahdi tools and utilities will be prefixed with "dahdi_" in order to
avoid any future conflicts with other packages.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Oron Peled <oron.peled@xorcom.com>
If you installed dahdi tools and did not specify DAHDI_PINNED=yes on the
makefile, when you run dahdi_genconf you would get an error like the following:
# dahdi_genconf
sh: span_types: command not found
Command failed (status=32512): 'span_types dumpconfig > /etc/dahdi/span-types.conf' at ...
This change allows the generator for span-types.conf and span-assignements.conf
check for the existence of the utilities before attempting to call them.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Adding the TE820 vendor and device ID into PCI.pm allows dahdi_hardware to
recognize the card.
Reported-by: Xavier Hienne
Internal-Issue-ID: DAHTOOL-58
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10680 17933a7a-c749-41c5-a318-cba88f637d49
With /proc/xpp code removed, some cleanup can be done.
* No need to search alternative attribute names, so xbus_attr_path() is
redundant.
* Don't compose xbus sysfs directory in multiple code locations.
Do it once in Xbus->new() and use the result ($xbus->sysfs_dir)
* Pass XPD directory strings directly to Xpd->new()
- So we parse it for unit/subunit only in Xpd->new()
* Don't parse xbus sysfs name:
- Toplevel scan, pass it as is to Xbus->new()
- Xbus->new() deduce the xbus->num from the naming
of Xpd's inside (nnⓂ️k) -- this is a hack until
we add xbus number as an xbus sysfs attribute
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10494 17933a7a-c749-41c5-a318-cba88f637d49
* All references to old /proc/xpp interface were removed.
* Everything is now done via sysfs
Information has been available from /sys/bus/astribanks since before
Dahdi-linux 2.2 .
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10492 17933a7a-c749-41c5-a318-cba88f637d49
The xpp_order configuration generator should only loop over telephony
devices, not all spans.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10266 17933a7a-c749-41c5-a318-cba88f637d49
Don't force extens we generate to have exactly 4 digits (simple
formatting limitation).
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10265 17933a7a-c749-41c5-a318-cba88f637d49
The wcb4xxp driver does not put enough information in the proc filesystem to
determine if the ports are in TE or NT mode. Previously the ports would
always just setup the dahdi-channels.conf file in TE mode. After this change
the dahdi_scan utility is used to detect if the ports are in TE or NT mode and
setup dahdi-channels.conf appropriately.
Internal-Issue-ID: DAHTOOL-54
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10214 17933a7a-c749-41c5-a318-cba88f637d49
Resolves a regression on the 2.5 branch that would result in:
$ dahdi_genconf
dahdi_genconf: missing default group (termtype=UNKNOWN)
E1 / T1 spans use software configuration to set CPE / NET mode. This
patch will just assume that a termtype is software selectable if it was
"UNKNOWN" when first scanning the span.
Internal-Issue-ID: DAHTOOL-55
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Tested-by: David Purdue <support@noojee.com.au>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10213 17933a7a-c749-41c5-a318-cba88f637d49
Use 'dahdi_genconf freepbxdb' to generate the required astdb entries
for Asterisk to use the extensions generated by dahdi_genconf. Requires
asterisk to be running.
This module is intended for testing as it bypasses standard FreePBX
functions only and hence may not work properly with Freepbx.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10142 17933a7a-c749-41c5-a318-cba88f637d49
It is possible that the contents of the proc files can change while the
perl modules are in the processing of processing them.
Specifically, if lsdahdi is called on boot before the channels are
configured, the channel will be "probed" to determine if it's an FXO or
FXS channel and that can result in the output of proc changing. When the
size of proc changes, the script can get confused about where the
beginning of the next line is.
This patch reads in the proc file completely into memory first, and then
starts processing each of the lines.
This resolves the "Unrecognized garbage 'INACTIVE)' in -" that is
displayed on boot with the recent trunk of DAHDI.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10040 17933a7a-c749-41c5-a318-cba88f637d49
Echo Cancellation firmware is loaded by xpp/stribank_hexload
(Using the oct612x code).
* astribank_hexload: options -O/-o/-A for handling the Octasic echo
cancellation firmware.
* astribank_tool: report that.
* xpp_fxloader: Run astribank_hexload, if needed.
* dahdi_perl: The EC module is an extra XPD, but not a "telephony device"
and hence not a span. Deal with that.
* waitfor_xpds: may need to wait a bit longer for firmware loading.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10032 17933a7a-c749-41c5-a318-cba88f637d49
The sorting function for SORT_XPPORDER accidentally sorted the Astribank
priorities from the xpp_order file (/etc/dahdi/xpp_order) lexicographically
instead of numerically, that is: 10 before 2.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@9986 17933a7a-c749-41c5-a318-cba88f637d49
Make the pri_termtype setting in genconf_parameters apply to any BRI/PRI
carddeclared as "soft NT". ATM, this is only the Xorcom E1/T1 device
and the Digium HA8 (BRI) module of the TDM card.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@9979 17933a7a-c749-41c5-a318-cba88f637d49
Don't require 'dahdi_hardware -v' to show the driver for a USB device.
Only works when the usbfs is not used (when /proc/bus/usb is not mounted).
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@9699 17933a7a-c749-41c5-a318-cba88f637d49
Attempting to use channel 16 on E1 CAS is disallowed since that channel is
reserved for RBS signaling. Configurations should not be generated that
attempt to use it.
Closes DAHDI-763.
Patch by dmartinez.
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@9485 17933a7a-c749-41c5-a318-cba88f637d49
