* Now we can limit fxotune "set" mode to specific channel range.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
* Sanitize hardware_id/location attributes, just like span_assignments
* Allow control of keys via SPAN_ASSIGNMENTS_KEY or '-k <key>' option
* In general, import most features/options from span_assignments
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Update dahdi.rules to create again the old fashioned device files
(/dev/dahdi/<channo>), but as symlinks to modern names.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
pinned-spans utilities are now essential:
* Called by udev rules
* Called by dahdi_genconf
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
* Correctly use the new "location" attribute
* Document the possibility to match against sysfs devpath
(used to be the "location")
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
* Install them as *.conf.sample -- that's what they are
* Correctly rename spantype.conf to span-types.conf (new name)
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
If you installed dahdi tools and did not specify DAHDI_PINNED=yes on the
makefile, when you run dahdi_genconf you would get an error like the following:
# dahdi_genconf
sh: span_types: command not found
Command failed (status=32512): 'span_types dumpconfig > /etc/dahdi/span-types.conf' at ...
This change allows the generator for span-types.conf and span-assignements.conf
check for the existence of the utilities before attempting to call them.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
* If xpp.dahdi_autoreg parameter is 'Y' -- Skip actuall registration.
* If dahdi.auto_assign_spans is '0' and there's no /etc/dahdi/pinned-spans.conf
Than use 'span_assignments auto ...' to assign device spans.
* Since dahdi_registration iterate in correct xpp_order, the span
assignment logic provides migration path for users who did not
generate their pinned-spans.conf configuration yet.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
* New functionality (documented in the script header):
- Alternative "keys" for device matching
- Added new command line options: --help, --dry-run, --verbose, --key
* Clean sysfs attribute contents from special characters in every use-case.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Do the "right thing" (hopefully. At least for a system with a single
device) if there is are no configuration files:
* No span-types.conf: just ignore it as before. It is optional.
* No pinned-spans.conf: use span_assignments auto (same as having
dahdi.auto_assign_spans=1).
* No system.conf: generate a temporary one with dahdi_genconf.
This will hopefully allow having a partially-working system, and help
making ut usable with 'span_assignments dumpconfig'. Or maybe just work
as-is.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
A newer version of the scripts fully adapted to pinned spans:
* handle_device does not run dahdi_cfg.
* A separate UDEV rule script for that: span_config. Should also work
for the non-pinned case.
* span_assignments, span_types: add actions 'auto' (manually enable all)
and 'dumpconfig' (dump current status in the format of configuration
file).
* Fixed name of span_types and span_assignments (no '-').
* spantype.conf renamed span-types.conf: configuration files do have a
dash.
* Those two are useful programs, insstalled to /usr/sbin.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
This copies in the make_version script from DAHDI-Linux to allow the version to
be properly reported from builds in git checkouts.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
In DAHDI-Linux 2.7 the layout of the /dev/dahdi files changes so that they are
grouped by span. When opening channels by number all utilities need to use
DAHDI_SPECIFY now.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
If the config file has two spans defined:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
echocanceller=mg2,1-23
span=2,2,0,esf,b8zs
bchan=25-47
dchan=48
And you only want to configure span-2, you would need to pass -S 1 to
dahdi_cfg. Now make the -S option take the span number as assigned in the
config file.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
In DAHDI-Linux 2.7 the layout of the /dev/dahdi files changes so that they are
grouped by span. When opening channels by number all utilities need to use
DAHDI_SPECIFY now.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Add installation of the pinned-spans support to the Makefile. For the
moment, however, they are not installed unless you use ./configure
--enable-pinned or build with 'make DAHDI_PINNED=yes'
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
* New script: dahdi_cfg_device_args:
- Just like span_assignments, span_types: may be given
one or more sysfs devpath's
- Output the required options for dahdi_cfg. E.g:
"-S 8 -C 15-28"
- This may be passed (with any other wanted options)
to the new dahdi_cfg (which supports '-S' and '-C')
* Use dahdi_cfg_device_args in handle_device so we configure
each span from udev.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
handle_device is the basic script intended to be called from udev.
It will call span_types on the span to apply optional
/etc/dahdi/spantype.conf onfiguration settings that need to be applied
before assignment (currently "pri" port types: E1/T1/J1).
Next it assigns span numbers to spans: if configured in
/etc/dahdi/pinned-spans.conf - use those settings. If not: by the order
of loading.
span_types and span_assignments can also be used to report the settings
they are used to configure.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
No point in loading the modules if nobody built them yet. It is a common
case for one to install the userspace tools package but not (yet?) build
the modules. See, e.g. http://bugs.debian.org/706046 .
With this changeset, we exit gracefully in such a case.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
If, via the sysfs attributed introduced in DAHDI-Linux 2.5.0, a user has
configured spans that do not have contiguous channel numbers, dahdi_scan will
not print several of the span attributes in addition to a bad basechan number.
This patch allows dahdi_scan to try and get the basechan for a span from sysfs
as opposed to calculating based on the number of channels in the previous span
scanned.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
One line change to re-include a missing header
Reported-By: Anthony Messina
Internal-Issue-ID: DAHTOOL-60
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
menuselect has not been used in dahdi-tools since r10411 (7 months ago). This
patch removes menuselect from the repository completely.
Reported-by: Sean Bright
Internal-Issue-ID: DAHTOOL-61
Patches: kill-menuselect.patch by Sean Bright (license #5060)
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10721 17933a7a-c749-41c5-a318-cba88f637d49
After hitting control-C when writing a wav file, dahdi_monitor reports
"Failed to read in a full wav header. Expect bad things."
Also when using the -F output option, the wav header is not written.
Reported-by: Richard Miller
Internal-Issue-ID: DAHTOOL-59
Patch: dahdi_monitor.diff by Richard Miller (license #5685)
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10717 17933a7a-c749-41c5-a318-cba88f637d49
* This xusb_spec:
- Is a dummy struct used for this xusb instance only.
- Is now passed by reference from caller.
- So caller now manage the life cycle of this struct
* Also, demote one INFO() to DBG() (library should not print
on its own)
* Also minor fix to DBG() output of spec initialization (leading 0)
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Origin: Xorcom xtalk (r9303)
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10711 17933a7a-c749-41c5-a318-cba88f637d49
xtalk: dump_packet() may now be used without debug flags by passing
mask == 0.
Origin: Xorcom xtalk (r9302)
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10710 17933a7a-c749-41c5-a318-cba88f637d49
Adding the TE820 vendor and device ID into PCI.pm allows dahdi_hardware to
recognize the card.
Reported-by: Xavier Hienne
Internal-Issue-ID: DAHTOOL-58
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10680 17933a7a-c749-41c5-a318-cba88f637d49
Oron Peled