xpp: perl_modules: Remove /proc/xpp usage
* All references to old /proc/xpp interface were removed. * Everything is now done via sysfs Information has been available from /sys/bus/astribanks since before Dahdi-linux 2.2 . Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10492 17933a7a-c749-41c5-a318-cba88f637d49
This commit is contained in:
Oron Peled
Tzafrir Cohen
parent
971a45a807
commit
6027d2d1d1
@ -34,7 +34,6 @@ hardware and loaded Dahdi devices.
|
||||
|
||||
our $virt_base;
|
||||
our $proc_dahdi_base;
|
||||
our $proc_xpp_base;
|
||||
our $proc_usb_base;
|
||||
our $sys_base;
|
||||
|
||||
|
||||
@ -32,7 +32,6 @@ BEGIN {
|
||||
$Dahdi::virt_base = '';
|
||||
}
|
||||
$Dahdi::proc_dahdi_base = "$Dahdi::virt_base/proc/dahdi";
|
||||
$Dahdi::proc_xpp_base = "$Dahdi::virt_base/proc/xpp";
|
||||
$Dahdi::proc_usb_base = "$Dahdi::virt_base/proc/bus/usb";
|
||||
$Dahdi::sys_base = "$Dahdi::virt_base/sys";
|
||||
}
|
||||
|
||||
@ -104,7 +104,7 @@ sub by_xpporder {
|
||||
|
||||
=head1 xbuses([sort_order])
|
||||
|
||||
Scans system (/proc and /sys) and returns a list of Astribank (Xbus)
|
||||
Scans system (via /sys) and returns a list of Astribank (Xbus)
|
||||
objects. The optional parameter sort_order is the order in which
|
||||
the Astribanks will be returns:
|
||||
|
||||
@ -249,53 +249,17 @@ sub xpd_of_span($) {
|
||||
Gets (and optionally sets) the internal Astribanks synchronization
|
||||
source. When used to set sync source, returns the original sync source.
|
||||
|
||||
A synchronization source is a value valid writing into /proc/xpp/sync .
|
||||
A synchronization source is a value valid writing into
|
||||
/sys/bus/astribanks/drivers/xppdrv/sync
|
||||
For more information read that file and see README.Astribank .
|
||||
|
||||
=cut
|
||||
|
||||
sub sync_via_proc {
|
||||
my $newsync = shift;
|
||||
my $result;
|
||||
my $newapi = 0;
|
||||
|
||||
my $proc_base = $Dahdi::proc_xpp_base;
|
||||
my $file = "$proc_base/sync";
|
||||
return '' unless -f $file;
|
||||
# First query
|
||||
open(F, "$file") or die "Failed to open $file for reading: $!";
|
||||
while(<F>) {
|
||||
chomp;
|
||||
/SYNC=/ and $newapi = 1;
|
||||
s/#.*//;
|
||||
if(/\S/) { # First non-comment line
|
||||
s/^SYNC=\D*// if $newapi;
|
||||
$result = $_;
|
||||
last;
|
||||
}
|
||||
}
|
||||
close F;
|
||||
if(defined($newsync)) { # Now change
|
||||
$newsync =~ s/.*/\U$&/;
|
||||
if($newsync =~ /^(\d+)$/) {
|
||||
$newsync = ($newapi)? "SYNC=$1" : "$1 0";
|
||||
} elsif($newsync ne 'DAHDI') {
|
||||
die "Bad sync parameter '$newsync'";
|
||||
}
|
||||
open(F, ">$file") or die "Failed to open $file for writing: $!";
|
||||
print F $newsync;
|
||||
close(F) or die "Failed in closing $file: $!";
|
||||
}
|
||||
return $result;
|
||||
}
|
||||
|
||||
sub sync {
|
||||
my ($newsync) = @_;
|
||||
my $result;
|
||||
my $file = "$sysfs_ab_driver/sync";
|
||||
if(! -f $file) { # Old /proc interface
|
||||
return sync_via_proc(@_);
|
||||
}
|
||||
die "Missing '$file'\n" unless -f $file;
|
||||
open(F, "$file") or die "Failed to open $file for reading: $!";
|
||||
$result = <F>;
|
||||
close F;
|
||||
|
||||
@ -42,7 +42,6 @@ sub blink($$) {
|
||||
sub create_all($$) {
|
||||
my $pack = shift or die "Wasn't called as a class method\n";
|
||||
my $xpd = shift || die;
|
||||
my $procdir = shift || die;
|
||||
local $/ = "\n";
|
||||
my @lines;
|
||||
for(my $i = 0; $i < $xpd->{CHANNELS}; $i++) {
|
||||
@ -52,37 +51,14 @@ sub create_all($$) {
|
||||
$xpd->{LINES} = \@lines;
|
||||
if($xpd->type eq 'FXO') {
|
||||
my $battery = $xpd->xpd_getattr("fxo_battery");
|
||||
if(defined $battery) {
|
||||
die "Missing '$battery' attribute\n" unless defined $battery;
|
||||
my @batt = split(/\s+/, $battery);
|
||||
foreach my $l (@lines) {
|
||||
die unless @batt;
|
||||
my $state = shift @batt;
|
||||
$l->{BATTERY} = ($state eq '+') ? 1 : 0;
|
||||
}
|
||||
} else {
|
||||
# Fallback to old interface
|
||||
my ($infofile) = glob "$procdir/*_info";
|
||||
die "Failed globbing '$procdir/*_info'" unless defined $infofile;
|
||||
open(F, "$infofile") || die "Failed opening '$infofile': $!";
|
||||
my $battery_info = 0;
|
||||
while (<F>) {
|
||||
chomp;
|
||||
$battery_info = 1 if /^Battery:/;
|
||||
if($battery_info && s/^\s*on\s*:\s*//) {
|
||||
my @batt = split;
|
||||
foreach my $l (@lines) {
|
||||
die unless @batt;
|
||||
my $state = shift @batt;
|
||||
$l->{BATTERY} = ($state eq '+') ? 1 : 0;
|
||||
}
|
||||
$battery_info = 0;
|
||||
die if @batt;
|
||||
}
|
||||
}
|
||||
close F;
|
||||
}
|
||||
}
|
||||
close F;
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -51,12 +51,6 @@ sub xbus_attr_path($$) {
|
||||
my ($busnum, @attr) = @_;
|
||||
foreach my $attr (@attr) {
|
||||
my $file = sprintf "$Dahdi::Xpp::sysfs_astribanks/xbus-%02d/$attr", $busnum;
|
||||
unless(-f $file) {
|
||||
my $procfile = sprintf "$Dahdi::proc_xpp_base/XBUS-%02d/$attr", $busnum;
|
||||
warn "$0: warning - OLD DRIVER: missing '$file'. Fall back to '$procfile'\n"
|
||||
unless $file_warned{$attr}++;
|
||||
$file = $procfile;
|
||||
}
|
||||
next unless -f $file;
|
||||
return $file;
|
||||
}
|
||||
@ -109,21 +103,6 @@ sub transport_type($$) {
|
||||
return $xbus->{TRANSPORT_TYPE};
|
||||
}
|
||||
|
||||
sub read_xpdnames_old($) {
|
||||
my $xbus_num = shift || die;
|
||||
my $pat = sprintf "$Dahdi::proc_xpp_base/XBUS-%02d/XPD-[0-9][0-9]", $xbus_num;
|
||||
my @xpdnames;
|
||||
|
||||
#print STDERR "read_xpdnames_old($xbus_num): $pat\n";
|
||||
foreach (glob $pat) {
|
||||
die "Bad /proc entry: '$_'" unless /^.*XPD-([0-9])([0-9])$/;
|
||||
my $name = sprintf("%02d:%1d:%1d", $xbus_num, $1, $2);
|
||||
#print STDERR "\t> $_ ($name)\n";
|
||||
push(@xpdnames, $name);
|
||||
}
|
||||
return @xpdnames;
|
||||
}
|
||||
|
||||
sub read_xpdnames($) {
|
||||
my $xbus_num = shift || die;
|
||||
my $xbus_dir = "$Dahdi::Xpp::sysfs_astribanks/xbus-$xbus_num";
|
||||
@ -141,8 +120,6 @@ sub read_xpdnames($) {
|
||||
return @xpdnames;
|
||||
}
|
||||
|
||||
my $warned_notransport = 0;
|
||||
|
||||
sub new($$) {
|
||||
my $pack = shift or die "Wasn't called as a class method\n";
|
||||
my $num = shift;
|
||||
@ -164,17 +141,11 @@ sub new($$) {
|
||||
}
|
||||
my @xpdnames;
|
||||
my @xpds;
|
||||
if(-e $transport) {
|
||||
die "OLD DRIVER: missing '$transport'\n" unless -e $transport;
|
||||
@xpdnames = read_xpdnames($num);
|
||||
} else {
|
||||
@xpdnames = read_xpdnames_old($num);
|
||||
warn "$0: warning - OLD DRIVER: missing '$transport'. Fall back to /proc\n"
|
||||
unless $warned_notransport++;
|
||||
}
|
||||
foreach my $xpdstr (@xpdnames) {
|
||||
my ($busnum, $unit, $subunit) = split(/:/, $xpdstr);
|
||||
my $procdir = "$Dahdi::proc_xpp_base/XBUS-$busnum/XPD-$unit$subunit";
|
||||
my $xpd = Dahdi::Xpp::Xpd->new($self, $unit, $subunit, $procdir, "$xbus_dir/$xpdstr");
|
||||
my $xpd = Dahdi::Xpp::Xpd->new($self, $unit, $subunit, "$xbus_dir/$xpdstr");
|
||||
push(@xpds, $xpd);
|
||||
}
|
||||
@{$self->{XPDS}} = sort { $a->id <=> $b->id } @xpds;
|
||||
|
||||
@ -52,11 +52,6 @@ Applicable only to digital (BRI/PRI) modules and always 0 for others.
|
||||
|
||||
Textual name: E.g. C<XPD-10>.
|
||||
|
||||
=head1 dir
|
||||
|
||||
The ProcFS directory with information about the XPD. e.g.
|
||||
C</proc/xpp/XBUS-00/XPD-10>.
|
||||
|
||||
=head1 sysfs_dir
|
||||
|
||||
The SysFS directory with information about the module. E.g.
|
||||
@ -112,65 +107,12 @@ sub xpd_attr_path($@) {
|
||||
foreach my $attr (@attr) {
|
||||
my $file = sprintf "$Dahdi::Xpp::sysfs_xpds/%02d:%1d:%1d/$attr",
|
||||
$busnum, $unitnum, $subunitnum;
|
||||
unless(-f $file) {
|
||||
my $procfile = sprintf "/proc/xpp/XBUS-%02d/XPD-%1d%1d/$attr",
|
||||
$busnum, $unitnum, $subunitnum;
|
||||
warn "$0: warning - OLD DRIVER: missing '$file'. Fall back to /proc\n"
|
||||
unless $file_warned{$attr}++;
|
||||
$file = $procfile;
|
||||
}
|
||||
next unless -f $file;
|
||||
return $file;
|
||||
}
|
||||
return undef;
|
||||
}
|
||||
|
||||
# Backward compat plug for old /proc interface...
|
||||
sub xpd_old_gettype($) {
|
||||
my $xpd = shift || die;
|
||||
my $summary = "/proc/xpp/" . $xpd->fqn . "/summary";
|
||||
open(F, $summary) or die "Failed to open '$summary': $!";
|
||||
my $head = <F>;
|
||||
close F;
|
||||
chomp $head;
|
||||
$head =~ s/^XPD-\d+\s+\(//;
|
||||
$head =~ s/,.*//;
|
||||
return $head;
|
||||
}
|
||||
|
||||
sub xpd_old_getspan($) {
|
||||
my $xpd = shift || die;
|
||||
my $dahdi_registration = "/proc/xpp/" . $xpd->fqn . "/dahdi_registration";
|
||||
open(F, $dahdi_registration) or die "Failed to open '$dahdi_registration': $!";
|
||||
my $head = <F>;
|
||||
close F;
|
||||
chomp $head;
|
||||
return $head;
|
||||
}
|
||||
|
||||
sub xpd_old_getoffhook($) {
|
||||
my $xpd = shift || die;
|
||||
my $summary = "/proc/xpp/" . $xpd->fqn . "/summary";
|
||||
my $channels;
|
||||
|
||||
local $/ = "\n";
|
||||
open(F, "$summary") || die "Failed opening $summary: $!\n";
|
||||
my $head = <F>;
|
||||
chomp $head; # "XPD-00 (BRI_TE ,card present, span 3)"
|
||||
my $offhook;
|
||||
while(<F>) {
|
||||
chomp;
|
||||
if(s/^\s*offhook\s*:\s*//) {
|
||||
s/\s*$//;
|
||||
$offhook = $_;
|
||||
$offhook || die "No channels in '$summary'";
|
||||
last;
|
||||
}
|
||||
}
|
||||
close F;
|
||||
return $offhook;
|
||||
}
|
||||
|
||||
my %attr_missing_warned; # Prevent duplicate warnings
|
||||
|
||||
sub xpd_driver_getattr($$) {
|
||||
@ -198,10 +140,6 @@ sub xpd_getattr($$) {
|
||||
$attr = lc($attr);
|
||||
my $file = $xpd->xpd_attr_path(lc($attr));
|
||||
|
||||
# Handle special cases for backward compat
|
||||
return xpd_old_gettype($xpd) if $attr eq 'type' and !defined $file;
|
||||
return xpd_old_getspan($xpd) if $attr eq 'span' and !defined $file;
|
||||
return xpd_old_getoffhook($xpd) if $attr eq 'offhook' and !defined $file;
|
||||
if(!defined($file)) {
|
||||
warn "$0: xpd_getattr($attr) -- Missing attribute.\n" if
|
||||
$attr_missing_warned{$attr};
|
||||
@ -284,7 +222,6 @@ sub new($$$$$) {
|
||||
my $xbus = shift || die;
|
||||
my $unit = shift; # May be zero
|
||||
my $subunit = shift; # May be zero
|
||||
my $procdir = shift || die;
|
||||
my $sysfsdir = shift || die;
|
||||
my $self = {
|
||||
XBUS => $xbus,
|
||||
@ -292,7 +229,6 @@ sub new($$$$$) {
|
||||
FQN => $xbus->name . "/" . "XPD-$unit$subunit",
|
||||
UNIT => $unit,
|
||||
SUBUNIT => $subunit,
|
||||
DIR => $procdir,
|
||||
SYSFS_DIR => $sysfsdir,
|
||||
};
|
||||
bless $self, $pack;
|
||||
@ -319,7 +255,7 @@ sub new($$$$$) {
|
||||
}
|
||||
}
|
||||
$self->{IS_DIGITAL} = ( $self->{IS_BRI} || $self->{IS_PRI} );
|
||||
Dahdi::Xpp::Line->create_all($self, $procdir);
|
||||
Dahdi::Xpp::Line->create_all($self);
|
||||
return $self;
|
||||
}
|
||||
|
||||
|
||||
11
xpp/xpp_sync
11
xpp/xpp_sync
@ -212,12 +212,13 @@ I<dahdi>) through the value of XPP_SYNC in /etc/dahdi/init.conf .
|
||||
|
||||
=over
|
||||
|
||||
=item /proc/xpp/sync
|
||||
=item /sys/bus/astribanks/drivers/xppdrv/sync
|
||||
|
||||
(Deprecated: no longer supported)
|
||||
xpp_sync is essentially a nicer interface to /proc/xpp/sync . That file
|
||||
shows the current xpp sync master (and in what format you need to write
|
||||
to it to set the master).
|
||||
xpp_sync is essentially a nicer interface to
|
||||
C</sys/bus/astribanks/drivers/xppdrv/sync>. That file
|
||||
shows the current xpp sync master.
|
||||
|
||||
Writing to it, force XPP drivers to use a different sync master
|
||||
|
||||
=back
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user