From 250bc06238de9fb1bd0089e0852e6577ceedc31d Mon Sep 17 00:00:00 2001
From: Shaun Ruffell <sruffell@digium.com>
Date: Thu, 29 Sep 2011 17:00:51 +0000
Subject: [PATCH] dahdi_genconf: Use 'dahdi_scan' to determine span_type for
 B410P cards.

The wcb4xxp driver does not put enough information in the proc filesystem to
determine if the ports are in TE or NT mode.  Previously the ports would
always just setup the dahdi-channels.conf file in TE mode. After this change
the dahdi_scan utility is used to detect if the ports are in TE or NT mode and
setup dahdi-channels.conf appropriately.

Internal-Issue-ID: DAHTOOL-54
Signed-off-by: Shaun Ruffell <sruffell@digium.com>

git-svn-id: http://svn.astersk.org/svn/dahdi/tools/trunk@10214 17933a7a-c749-41c5-a318-cba88f637d49
---
 xpp/perl_modules/Dahdi/Span.pm | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/xpp/perl_modules/Dahdi/Span.pm b/xpp/perl_modules/Dahdi/Span.pm
index beea6af..aeebfc1 100644
--- a/xpp/perl_modules/Dahdi/Span.pm
+++ b/xpp/perl_modules/Dahdi/Span.pm
@@ -131,7 +131,7 @@ my @bri_strings = (
 		'(?:quad|octo)BRI PCI ISDN Card.* \[(NT|TE)\]',
 		'octoBRI \[(NT|TE)\] ',
 		'HFC-S PCI A ISDN.* \[(NT|TE)\] ',
-		'(B4XXP) \(PCI\) Card', # Does not expose NT/TE type
+		'(B4XXP) \(PCI\) Card', # Use dahdi_scan to determine TE/NT mode
 		'(WCBRI)', # has selectable NT/TE modes via dahdi_cfg
 		);
 
@@ -177,6 +177,28 @@ sub init_proto($$) {
 	$self->{TYPE} = "${proto}_$self->{TERMTYPE}";
 }
 
+sub get_digital_spantype {
+	my $span_no = shift;
+	my @lines = split /\n/, `dahdi_scan`;
+	my $found_span = 0;
+	foreach my $line (@lines) {
+		if (! $found_span) {
+			if ($line =~ m/\[$span_no\]/) {
+				$found_span = 1;
+			}
+		} else {
+			if ($line !~ m/^\[/) {
+				if ($line =~ m/digital-(TE|NT)/ ){
+					return $1;
+				}
+			} else {
+				$found_span = 0;
+			}
+		}
+	}
+	die "Cannot determine digital spantype";
+}
+
 sub new($$) {
 	my $pack = shift or die "Wasn't called as a class method\n";
 	my $proc_file = shift or die "Missing a proc file parameter\n";
@@ -195,7 +217,12 @@ sub new($$) {
 	foreach my $cardtype (@bri_strings) {
 		if($head =~ m/$cardtype/) {
 			my $termtype = $1;
-			$termtype = 'TE' if ( $1 eq 'B4XXP' or $1 eq 'WCBRI' );
+			if ($1 eq 'B4XXP') {
+				$termtype = get_digital_spantype($num);
+			}
+			if ($1 eq 'WCBRI') {
+				$termtype = 'TE';
+			}
 			$self->{IS_DIGITAL} = 1;
 			$self->{IS_BRI} = 1;
 			$self->{TERMTYPE} = $termtype;