FGCOM/dahdi-linux
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d9aa82b025
dahdi-linux/drivers/dahdi/xpp/card_pri.c
Oron Peled d9aa82b025 xpp: rename xpd->type to xpd->xpd_type 
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
2017-03-14 20:37:45 +02:00

2762 lines
72 KiB
C
Raw Blame History

/*
* Written by Oron Peled <oron@actcom.co.il>
* Copyright (C) 2004-2006, Xorcom
*
* Parts derived from Cologne demo driver for the chip.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include "xpd.h"
#include "xproto.h"
#include "xpp_dahdi.h"
#include "card_pri.h"
#include "dahdi_debug.h"
#include "xbus-core.h"
static const char rcsid[] = "$Id$";
/* must be before dahdi_debug.h */
static DEF_PARM(int, debug, 0, 0644, "Print DBG statements");
static DEF_PARM(uint, poll_interval, 500, 0644,
"Poll channel state interval in milliseconds (0 - disable)");
#define PRI_LINES_BITMASK BITMASK(31)
#define PRI_SIGCAP ( \
DAHDI_SIG_EM | \
DAHDI_SIG_CLEAR | \
DAHDI_SIG_FXSLS | \
DAHDI_SIG_FXSGS | \
DAHDI_SIG_FXSKS | \
DAHDI_SIG_HARDHDLC | \
DAHDI_SIG_MTP2 | \
DAHDI_SIG_FXOLS | \
DAHDI_SIG_FXOGS | \
DAHDI_SIG_FXOKS | \
DAHDI_SIG_CAS | \
DAHDI_SIG_EM_E1 | \
DAHDI_SIG_DACS_RBS \
)
static bool is_sigtype_dchan(int sigtype)
{
if ((sigtype & DAHDI_SIG_HDLCRAW) == DAHDI_SIG_HDLCRAW)
return 1;
if ((sigtype & DAHDI_SIG_HDLCFCS) == DAHDI_SIG_HDLCFCS)
return 1;
if ((sigtype & DAHDI_SIG_HARDHDLC) == DAHDI_SIG_HARDHDLC)
return 1;
return 0;
}
#define MAX_SLAVES 4 /* we have MUX of 4 clocks */
#define PRI_PORT(xpd) ((xpd)->addr.subunit)
#define CHAN_PER_REGS(p) (((p)->is_esf) ? 2 : 4)
/*---------------- PRI Protocol Commands ----------------------------------*/
static void dchan_state(xpd_t *xpd, bool up);
static bool pri_packet_is_valid(xpacket_t *pack);
static void pri_packet_dump(const char *msg, xpacket_t *pack);
static int pri_startup(struct file *file, struct dahdi_span *span);
static int pri_shutdown(struct dahdi_span *span);
static int pri_rbsbits(struct dahdi_chan *chan, int bits);
static int pri_lineconfig(xpd_t *xpd, int lineconfig);
static void send_idlebits(xpd_t *xpd, bool saveold);
static int apply_pri_protocol(xpd_t *xpd);
enum pri_protocol {
PRI_PROTO_0 = 0,
PRI_PROTO_E1 = 1,
PRI_PROTO_T1 = 2,
PRI_PROTO_J1 = 3
};
static const char *protocol_names[] = {
[PRI_PROTO_0] = "??", /* unknown */
[PRI_PROTO_E1] = "E1",
[PRI_PROTO_T1] = "T1",
[PRI_PROTO_J1] = "J1"
};
static enum spantypes pri_protocol2spantype(enum pri_protocol pri_protocol)
{
switch (pri_protocol) {
case PRI_PROTO_E1: return SPANTYPE_DIGITAL_E1;
case PRI_PROTO_T1: return SPANTYPE_DIGITAL_T1;
case PRI_PROTO_J1: return SPANTYPE_DIGITAL_J1;
default:
return SPANTYPE_INVALID;
}
}
static const char *pri_protocol_name(enum pri_protocol pri_protocol)
{
return protocol_names[pri_protocol];
}
static int pri_num_channels(enum pri_protocol pri_protocol)
{
static int num_channels[] = {
[PRI_PROTO_0] = 0,
[PRI_PROTO_E1] = 31,
[PRI_PROTO_T1] = 24,
[PRI_PROTO_J1] = 0
};
return num_channels[pri_protocol];
}
static const char *type_name(enum pri_protocol pri_protocol)
{
static const char *names[4] = {
[PRI_PROTO_0] = "PRI-Unknown",
[PRI_PROTO_E1] = "E1",
[PRI_PROTO_T1] = "T1",
[PRI_PROTO_J1] = "J1"
};
return names[pri_protocol];
}
static int pri_linecompat(enum pri_protocol pri_protocol)
{
static const int linecompat[] = {
[PRI_PROTO_0] = 0,
[PRI_PROTO_E1] =
/* coding */
DAHDI_CONFIG_CCS | DAHDI_CONFIG_CRC4 |
/* framing */
DAHDI_CONFIG_AMI | DAHDI_CONFIG_HDB3,
[PRI_PROTO_T1] =
/* coding */
DAHDI_CONFIG_D4 | DAHDI_CONFIG_ESF |
/* framing */
DAHDI_CONFIG_AMI | DAHDI_CONFIG_B8ZS,
[PRI_PROTO_J1] = 0
};
DBG(GENERAL, "pri_linecompat: pri_protocol=%d\n", pri_protocol);
return linecompat[pri_protocol];
}
#define PRI_DCHAN_IDX(priv) ((priv)->dchan_num - 1)
enum pri_led_state {
PRI_LED_OFF = 0x0,
PRI_LED_ON = 0x1,
/*
* We blink by software from driver, so that
* if the driver malfunction that blink would stop.
*/
// PRI_LED_BLINK_SLOW = 0x2, /* 1/2 a second blink cycle */
// PRI_LED_BLINK_FAST = 0x3 /* 1/4 a second blink cycle */
};
enum pri_led_selectors {
BOTTOM_RED_LED = 0,
BOTTOM_GREEN_LED = 1,
TOP_RED_LED = 2,
TOP_GREEN_LED = 3,
};
#define NUM_LEDS 4
struct pri_leds {
__u8 state:2; /* enum pri_led_state */
__u8 led_sel:2; /* enum pri_led_selectors */
__u8 reserved:4;
};
#define REG_CCB1_T 0x2F /* Clear Channel Register 1 */
#define REG_FRS0 0x4C /* Framer Receive Status Register 0 */
#define REG_FRS0_T1_FSR BIT(0) /* T1 - Frame Search Restart Flag */
#define REG_FRS0_LMFA BIT(1) /* Loss of Multiframe Alignment */
#define REG_FRS0_E1_NMF BIT(2) /* E1 - No Multiframe Alignment Found */
#define REG_FRS0_RRA BIT(4) /* Receive Remote Alarm: T1-YELLOW-Alarm */
#define REG_FRS0_LFA BIT(5) /* Loss of Frame Alignment */
#define REG_FRS0_AIS BIT(6) /* Alarm Indication Signal: T1-BLUE-Alarm */
#define REG_FRS0_LOS BIT(7) /* Los Of Signal: T1-RED-Alarm */
#define REG_FRS1 0x4D /* Framer Receive Status Register 1 */
#define REG_LIM0 0x36
/*
* Master Mode, DCO-R circuitry is frequency synchronized
* to the clock supplied by SYNC
*/
#define REG_LIM0_MAS BIT(0)
/*
* Receive Termination Resistance Selection:
* integrated resistor to create 75 Ohm termination (100 || 300 = 75)
* 0 = 100 Ohm
* 1 = 75 Ohm
*/
#define REG_LIM0_RTRS BIT(5)
#define REG_LIM0_LL BIT(1) /* LL (Local Loopback) */
#define REG_FMR0 0x1C
#define REG_FMR0_E_RC0 BIT(4) /* Receive Code - LSB */
#define REG_FMR0_E_RC1 BIT(5) /* Receive Code - MSB */
#define REG_FMR0_E_XC0 BIT(6) /* Transmit Code - LSB */
#define REG_FMR0_E_XC1 BIT(7) /* Transmit Code - MSB */
#define REG_FMR1 0x1D
#define REG_FMR1_XAIS BIT(0) /* Transmit AIS toward transmit end */
#define REG_FMR1_SSD0 BIT(1)
#define REG_FMR1_ECM BIT(2)
#define REG_FMR1_T_CRC BIT(3) /* Enable CRC6 */
#define REG_FMR1_E_XFS BIT(3) /* Transmit Framing Select */
#define REG_FMR1_PMOD BIT(4) /* E1 = 0, T1/J1 = 1 */
#define REG_FMR1_EDL BIT(5)
#define REG_FMR1_AFR BIT(6)
#define REG_FMR2 0x1E
#define REG_FMR2_E_ALMF BIT(0) /* Automatic Loss of Multiframe */
#define REG_FMR2_T_EXZE BIT(0) /* Excessive Zeros Detection Enable */
#define REG_FMR2_E_AXRA BIT(1) /* Automatic Transmit Remote Alarm */
#define REG_FMR2_T_AXRA BIT(1) /* Automatic Transmit Remote Alarm */
#define REG_FMR2_E_PLB BIT(2) /* Payload Loop-Back */
#define REG_FMR2_E_RFS0 BIT(6) /* Receive Framing Select - LSB */
#define REG_FMR2_E_RFS1 BIT(7) /* Receive Framing Select - MSB */
/* Select Synchronization/Resynchronization Procedure */
#define REG_FMR2_T_SSP BIT(5)
/* Multiple Candidates Synchronization Procedure */
#define REG_FMR2_T_MCSP BIT(6)
/* Automatic Force Resynchronization */
#define REG_FMR2_T_AFRS BIT(7)
#define REG_FMR3 0x31
#define REG_FMR3_EXTIW BIT(0) /* Extended CRC4 to Non-CRC4 Interworking */
#define REG_FMR4 0x20
#define REG_FMR4_FM0 BIT(0)
#define REG_FMR4_FM1 BIT(1)
#define REG_FMR4_AUTO BIT(2)
#define REG_FMR4_SSC0 BIT(3)
#define REG_FMR4_SSC1 BIT(4)
#define REG_FMR4_XRA BIT(5) /* Transmit Remote Alarm (Yellow Alarm) */
#define REG_FMR4_TM BIT(6)
#define REG_FMR4_AIS3 BIT(7)
#define REG_XSW_E 0x20
#define REG_XSW_E_XY4 BIT(0)
#define REG_XSW_E_XY3 BIT(1)
#define REG_XSW_E_XY2 BIT(2)
#define REG_XSW_E_XY1 BIT(3)
#define REG_XSW_E_XY0 BIT(4)
#define REG_XSW_E_XRA BIT(5) /* Transmit Remote Alarm (Yellow Alarm) */
#define REG_XSW_E_XTM BIT(6)
#define REG_XSW_E_XSIS BIT(7)
#define REG_XSP_E 0x21
#define REG_FMR5_T 0x21
/* Transmit Spare Bit For International Use (FAS Word) */
#define REG_XSP_E_XSIF BIT(2)
#define REG_FMR5_T_XTM BIT(2) /* Transmit Transparent Mode */
/* Automatic Transmission of Submultiframe Status */
#define REG_XSP_E_AXS BIT(3)
/* E-Bit Polarity, Si-bit position of every outgoing CRC multiframe */
#define REG_XSP_E_EBP BIT(4)
#define REG_XSP_E_CASEN BIT(6) /* CAS: Channel Associated Signaling Enable */
#define REG_FMR5_T_EIBR BIT(6) /* CAS: Enable Internal Bit Robbing Access */
#define REG_XC0_T 0x22 /* Transmit Control 0 */
#define REG_XC0_BRIF BIT(5) /* Bit Robbing Idle Function */
#define REG_CMDR_E 0x02 /* Command Register */
#define REG_CMDR_RRES BIT(6) /* Receiver reset */
#define REG_CMDR_XRES BIT(4) /* Transmitter reset */
#define REG_RC0 0x24
#define REG_RC0_SJR BIT(7) /* T1 = 0, J1 = 1 */
#define REG_CMR1 0x44
#define REG_CMR1_DRSS (BIT(7) | BIT(6))
#define REG_CMR1_RS (BIT(5) | BIT(4))
#define REG_CMR1_STF BIT(2)
#define REG_RS1_E 0x70 /* Receive CAS Register 1 */
#define REG_RS2_E 0x71 /* Receive CAS Register 2 */
#define REG_RS3_E 0x72 /* Receive CAS Register 3 */
#define REG_RS4_E 0x73 /* Receive CAS Register 4 */
#define REG_RS5_E 0x74 /* Receive CAS Register 5 */
#define REG_RS6_E 0x75 /* Receive CAS Register 6 */
#define REG_RS7_E 0x76 /* Receive CAS Register 7 */
#define REG_RS8_E 0x77 /* Receive CAS Register 8 */
#define REG_RS9_E 0x78 /* Receive CAS Register 9 */
#define REG_RS10_E 0x79 /* Receive CAS Register 10 */
#define REG_RS11_E 0x7A /* Receive CAS Register 11 */
#define REG_RS12_E 0x7B /* Receive CAS Register 12 */
#define REG_RS13_E 0x7C /* Receive CAS Register 13 */
#define REG_RS14_E 0x7D /* Receive CAS Register 14 */
#define REG_RS15_E 0x7E /* Receive CAS Register 15 */
#define REG_RS16_E 0x7F /* Receive CAS Register 16 */
#define REG_PC2 0x81 /* Port Configuration 2 */
#define REG_PC3 0x82 /* Port Configuration 3 */
#define REG_PC4 0x83 /* Port Configuration 4 */
#define REG_XPM2 0x28 /* Transmit Pulse Mask 2 */
#define VAL_PC_SYPR 0x00 /* Synchronous Pulse Receive (Input, low active) */
#define VAL_PC_GPI 0x90 /* General purpose input */
#define VAL_PC_GPOH 0x0A /* General Purpose Output, high level */
#define VAL_PC_GPOL 0x0B /* General Purpose Output, low level */
#define NUM_CAS_RS_E (REG_RS16_E - REG_RS2_E + 1)
/* and of those, the ones used in T1: */
#define NUM_CAS_RS_T (REG_RS12_E - REG_RS1_E + 1)
struct PRI_priv_data {
bool clock_source;
enum pri_protocol pri_protocol;
xpp_line_t rbslines;
int deflaw;
unsigned int dchan_num;
bool initialized;
bool dchan_is_open;
int is_cas;
unsigned int chanconfig_dchan;
#define NO_DCHAN (0)
#define DCHAN(p) ((p)->chanconfig_dchan)
#define VALID_DCHAN(p) (DCHAN(p) != NO_DCHAN)
#define SET_DCHAN(p, d) do { DCHAN(p) = (d); } while (0);
__u8 cas_rs_e[NUM_CAS_RS_E];
__u8 cas_ts_e[NUM_CAS_RS_E];
uint cas_replies;
bool is_esf;
bool local_loopback;
uint poll_noreplies;
uint layer1_replies;
__u8 reg_frs0;
__u8 reg_frs1;
bool layer1_up;
int alarms;
__u8 dchan_tx_sample;
__u8 dchan_rx_sample;
uint dchan_tx_counter;
uint dchan_rx_counter;
bool dchan_alive;
uint dchan_alive_ticks;
enum pri_led_state ledstate[NUM_LEDS];
};
static xproto_table_t PROTO_TABLE(PRI);
DEF_RPACKET_DATA(PRI, SET_LED, /* Set one of the LED's */
struct pri_leds pri_leds;);
static /* 0x33 */ DECLARE_CMD(PRI, SET_LED, enum pri_led_selectors led_sel,
enum pri_led_state to_led_state);
#define DO_LED(xpd, which, tostate) \
CALL_PROTO(PRI, SET_LED, (xpd)->xbus, (xpd), (which), (tostate))
/*---------------- PRI: Methods -------------------------------------------*/
static int query_subunit(xpd_t *xpd, __u8 regnum)
{
XPD_DBG(REGS, xpd, "(%d%d): REG=0x%02X\n", xpd->addr.unit,
xpd->addr.subunit, regnum);
return xpp_register_request(xpd->xbus, xpd, PRI_PORT(xpd), /* portno */
0, /* writing */
regnum, 0, /* do_subreg */
0, /* subreg */
0, /* data_L */
0, /* do_datah */
0, /* data_H */
0 /* should_reply */
);
}
static int write_subunit(xpd_t *xpd, __u8 regnum, __u8 val)
{
XPD_DBG(REGS, xpd, "(%d%d): REG=0x%02X dataL=0x%02X\n", xpd->addr.unit,
xpd->addr.subunit, regnum, val);
return xpp_register_request(xpd->xbus, xpd,
PRI_PORT(xpd), /* portno */
1, /* writing */
regnum, 0, /* do_subreg */
0, /* subreg */
val, /* data_L */
0, /* do_datah */
0, /* data_H */
0 /* should_reply */
);
}
static int pri_write_reg(xpd_t *xpd, int regnum, __u8 val)
{
XPD_DBG(REGS, xpd, "(%d%d): REG=0x%02X dataL=0x%02X\n", xpd->addr.unit,
xpd->addr.subunit, regnum, val);
return xpp_register_request(xpd->xbus, xpd, 0, /* portno=0 */
1, /* writing */
regnum, 0, /* do_subreg */
0, /* subreg */
val, /* data_L */
0, /* do_datah */
0, /* data_H */
0 /* should_reply */
);
}
static int cas_regbase(xpd_t *xpd)
{
struct PRI_priv_data *priv;
priv = xpd->priv;
switch (priv->pri_protocol) {
case PRI_PROTO_E1:
return REG_RS2_E;
case PRI_PROTO_T1:
/* fall-through */
case PRI_PROTO_J1:
return REG_RS1_E;
case PRI_PROTO_0:
/* fall-through */
;
}
BUG();
return 0;
}
static int cas_numregs(xpd_t *xpd)
{
struct PRI_priv_data *priv;
priv = xpd->priv;
switch (priv->pri_protocol) {
case PRI_PROTO_E1:
return NUM_CAS_RS_E;
case PRI_PROTO_T1:
/* fall-through */
case PRI_PROTO_J1:
return NUM_CAS_RS_T;
case PRI_PROTO_0:
/* fall-through */
;
}
BUG();
return 0;
}
static int write_cas_reg(xpd_t *xpd, int rsnum, __u8 val)
{
struct PRI_priv_data *priv;
int regbase = cas_regbase(xpd);
int num_cas_rs = cas_numregs(xpd);
int regnum;
bool is_d4 = 0;
BUG_ON(!xpd);
priv = xpd->priv;
if ((priv->pri_protocol == PRI_PROTO_T1) && !priv->is_esf) {
/* same data should be copied to RS7..12 in D4 only */
is_d4 = 1;
}
if (rsnum < 0 || rsnum >= num_cas_rs) {
XPD_ERR(xpd, "RBS(TX): rsnum=%d\n", rsnum);
BUG();
}
regnum = regbase + rsnum;
priv->cas_ts_e[rsnum] = val;
XPD_DBG(SIGNAL, xpd, "RBS(TX): reg=0x%X val=0x%02X\n", regnum, val);
write_subunit(xpd, regbase + rsnum, val);
if (is_d4) {
/* same data should be copied to RS7..12 in D4 only */
regnum = REG_RS7_E + rsnum;
XPD_DBG(SIGNAL, xpd, "RBS(TX): reg=0x%X val=0x%02X\n", regnum,
val);
write_subunit(xpd, regnum, val);
}
return 0;
}
static bool valid_pri_modes(const xpd_t *xpd)
{
struct PRI_priv_data *priv;
BUG_ON(!xpd);
priv = xpd->priv;
if (priv->pri_protocol != PRI_PROTO_E1
&& priv->pri_protocol != PRI_PROTO_T1
&& priv->pri_protocol != PRI_PROTO_J1)
return 0;
return 1;
}
static void PRI_card_pcm_recompute(xpd_t *xpd, xpp_line_t pcm_mask)
{
struct PRI_priv_data *priv;
int i;
int line_count = 0;
unsigned long flags;
uint pcm_len;
BUG_ON(!xpd);
priv = xpd->priv;
spin_lock_irqsave(&PHONEDEV(xpd).lock_recompute_pcm, flags);
//XPD_DBG(SIGNAL, xpd, "pcm_mask=0x%X\n", pcm_mask);
/* Add/remove all the trivial cases */
pcm_mask |= PHONEDEV(xpd).offhook_state;
if (priv->is_cas)
pcm_mask |= BITMASK(PHONEDEV(xpd).channels);
for_each_line(xpd, i)
if (IS_SET(pcm_mask, i))
line_count++;
else
if (priv->is_cas) {
if (priv->pri_protocol == PRI_PROTO_E1) {
/* CAS: Don't send PCM to D-Channel */
line_count--;
pcm_mask &= ~BIT(PRI_DCHAN_IDX(priv));
}
}
/*
* FIXME: Workaround a bug in sync code of the Astribank.
* Send dummy PCM for sync.
*/
if (xpd->addr.unit == 0 && pcm_mask == 0) {
pcm_mask = BIT(0);
line_count = 1;
}
pcm_len = (line_count)
? RPACKET_HEADERSIZE + sizeof(xpp_line_t) +
line_count * DAHDI_CHUNKSIZE : 0L;
update_wanted_pcm_mask(xpd, pcm_mask, pcm_len);
spin_unlock_irqrestore(&PHONEDEV(xpd).lock_recompute_pcm, flags);
}
/*
* Set E1/T1/J1
* May only be called on unregistered xpd's
* (the span and channel description are set according to this)
*/
static int set_pri_proto(xpd_t *xpd, enum pri_protocol set_proto)
{
struct PRI_priv_data *priv;
int deflaw;
unsigned int dchan_num;
int default_lineconfig = 0;
int ret;
struct phonedev *phonedev;
BUG_ON(!xpd);
priv = xpd->priv;
phonedev = &PHONEDEV(xpd);
if (test_bit(DAHDI_FLAGBIT_REGISTERED, &phonedev->span.flags)) {
XPD_NOTICE(xpd, "%s: %s already assigned as span %d\n",
__func__, phonedev->span.name,
phonedev->span.spanno);
return -EBUSY;
}
if (priv->pri_protocol != PRI_PROTO_0) {
if (priv->pri_protocol == set_proto) {
XPD_NOTICE(xpd, "Already in protocol %s. Ignored\n",
pri_protocol_name(set_proto));
return 0;
} else {
XPD_INFO(xpd, "Switching from %s to %s\n",
pri_protocol_name(priv->pri_protocol),
pri_protocol_name(set_proto));
}
}
switch (set_proto) {
case PRI_PROTO_E1:
deflaw = DAHDI_LAW_ALAW;
dchan_num = 16;
default_lineconfig =
DAHDI_CONFIG_CCS | DAHDI_CONFIG_CRC4 | DAHDI_CONFIG_HDB3;
break;
case PRI_PROTO_T1:
deflaw = DAHDI_LAW_MULAW;
dchan_num = 24;
default_lineconfig = DAHDI_CONFIG_ESF | DAHDI_CONFIG_B8ZS;
break;
case PRI_PROTO_J1:
/*
* Check all assumptions
*/
deflaw = DAHDI_LAW_MULAW;
dchan_num = 24;
default_lineconfig = 0; /* FIXME: J1??? */
XPD_NOTICE(xpd, "J1 is not supported yet\n");
return -ENOSYS;
default:
XPD_ERR(xpd, "%s: Unknown pri protocol = %d\n", __func__,
set_proto);
return -EINVAL;
}
priv->pri_protocol = set_proto;
priv->is_cas = -1;
phonedev_alloc_channels(xpd, pri_num_channels(set_proto));
phonedev->offhook_state = BITMASK(phonedev->channels);
CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0);
priv->deflaw = deflaw;
priv->dchan_num = dchan_num;
priv->local_loopback = 0;
xpd->type_name = type_name(priv->pri_protocol);
XPD_DBG(GENERAL, xpd, "%s, channels=%d, dchan_num=%d, deflaw=%d\n",
pri_protocol_name(set_proto), phonedev->channels,
priv->dchan_num, priv->deflaw);
/*
* Must set default now, so layer1 polling (Register REG_FRS0) would
* give reliable results.
*/
ret = pri_lineconfig(xpd, default_lineconfig);
if (ret) {
XPD_NOTICE(xpd, "Failed setting PRI default line config\n");
return ret;
}
return apply_pri_protocol(xpd);
}
static void dahdi_update_syncsrc(xpd_t *xpd)
{
struct PRI_priv_data *priv;
xpd_t *subxpd;
int best_spanno = 0;
int i;
if (!SPAN_REGISTERED(xpd))
return;
for (i = 0; i < MAX_SLAVES; i++) {
subxpd = xpd_byaddr(xpd->xbus, xpd->addr.unit, i);
if (!subxpd)
continue;
priv = subxpd->priv;
if (priv->clock_source && priv->alarms == 0) {
if (best_spanno)
XPD_ERR(xpd,
"Duplicate XPD with clock_source=1\n");
best_spanno = PHONEDEV(subxpd).span.spanno;
}
}
for (i = 0; i < MAX_SLAVES; i++) {
subxpd = xpd_byaddr(xpd->xbus, xpd->addr.unit, i);
if (!subxpd)
continue;
if (PHONEDEV(subxpd).span.syncsrc == best_spanno)
XPD_DBG(SYNC, xpd, "Setting SyncSource to span %d\n",
best_spanno);
else
XPD_DBG(SYNC, xpd, "Slaving to span %d\n", best_spanno);
PHONEDEV(subxpd).span.syncsrc = best_spanno;
}
}
/*
* Called from:
* - set_master_mode() --
* As a result of dahdi_cfg
* - layer1_state() --
* As a result of an alarm.
*/
static void set_clocking(xpd_t *xpd)
{
xbus_t *xbus;
xpd_t *best_xpd = NULL;
int best_subunit = -1; /* invalid */
unsigned int best_subunit_prio = INT_MAX;
int i;
xbus = xpd->xbus;
/* Find subunit with best timing priority */
for (i = 0; i < MAX_SLAVES; i++) {
struct PRI_priv_data *priv;
xpd_t *subxpd;
subxpd = xpd_byaddr(xbus, xpd->addr.unit, i);
if (!subxpd)
continue;
priv = subxpd->priv;
if (priv->alarms != 0)
continue;
if (PHONEDEV(subxpd).timing_priority > 0
&& PHONEDEV(subxpd).timing_priority < best_subunit_prio) {
best_xpd = subxpd;
best_subunit = i;
best_subunit_prio = PHONEDEV(subxpd).timing_priority;
}
}
/* Now set it */
if (best_xpd
&& ((struct PRI_priv_data *)(best_xpd->priv))->clock_source == 0) {
__u8 reg_pc_init[] = { VAL_PC_GPI, VAL_PC_GPI, VAL_PC_GPI };
for (i = 0; i < ARRAY_SIZE(reg_pc_init); i++) {
__u8 reg_pc = reg_pc_init[i];
reg_pc |=
(best_subunit & (1 << i)) ? VAL_PC_GPOH :
VAL_PC_GPOL;
XPD_DBG(SYNC, best_xpd,
"ClockSource Set: PC%d=0x%02X\n", 2 + i,
reg_pc);
pri_write_reg(xpd, REG_PC2 + i, reg_pc);
}
((struct PRI_priv_data *)(best_xpd->priv))->clock_source = 1;
}
/* clear old clock sources */
for (i = 0; i < MAX_SLAVES; i++) {
struct PRI_priv_data *priv;
xpd_t *subxpd;
subxpd = xpd_byaddr(xbus, xpd->addr.unit, i);
if (subxpd && subxpd != best_xpd) {
XPD_DBG(SYNC, subxpd, "Clearing clock source\n");
priv = subxpd->priv;
priv->clock_source = 0;
}
}
dahdi_update_syncsrc(xpd);
}
static void set_reg_lim0(const char *msg, xpd_t *xpd)
{
struct PRI_priv_data *priv;
bool is_master_mode;
bool localloop;
__u8 lim0 = 0;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
is_master_mode = PHONEDEV(xpd).timing_priority == 0;
localloop = priv->local_loopback;
lim0 |= (localloop) ? REG_LIM0_LL : 0;
if (is_master_mode)
lim0 |= REG_LIM0_MAS;
else
lim0 &= ~REG_LIM0_MAS;
XPD_DBG(SIGNAL, xpd, "%s(%s): %s, %s\n", __func__, msg,
(is_master_mode) ? "MASTER" : "SLAVE",
(localloop) ? "LOCALLOOP" : "NO_LOCALLOOP");
write_subunit(xpd, REG_LIM0, lim0);
}
/*
* Normally set by the timing parameter in /etc/dahdi/system.conf
* If this is called by dahdi_cfg, than it's too late to change
* dahdi sync priority (we are already registered)
*
* Also called from set_localloop()
*/
static int set_master_mode(const char *msg, xpd_t *xpd)
{
BUG_ON(!xpd);
XPD_DBG(SIGNAL, xpd, "\n");
set_reg_lim0(__func__, xpd);
set_clocking(xpd);
return 0;
}
static int set_localloop(xpd_t *xpd, bool localloop)
{
struct PRI_priv_data *priv;
BUG_ON(!xpd);
priv = xpd->priv;
if (SPAN_REGISTERED(xpd)) {
XPD_NOTICE(xpd, "Registered as span %d. Cannot do %s\n",
PHONEDEV(xpd).span.spanno, __func__);
return -EBUSY;
}
priv->local_loopback = localloop;
XPD_DBG(SIGNAL, xpd, "%s: %s\n", __func__,
(localloop) ? "LOCALLOOP" : "NO");
set_master_mode(__func__, xpd);
return 0;
}
#define VALID_CONFIG(bit, flg, str) [bit] = { .flags = flg, .name = str }
static const struct {
const char *name;
const int flags;
} valid_spanconfigs[sizeof(unsigned int) * 8] = {
/* These apply to T1 */
VALID_CONFIG(4, DAHDI_CONFIG_D4, "D4"),
VALID_CONFIG(5, DAHDI_CONFIG_ESF, "ESF"),
VALID_CONFIG(6, DAHDI_CONFIG_AMI, "AMI"),
VALID_CONFIG(7, DAHDI_CONFIG_B8ZS, "B8ZS"),
/* These apply to E1 */
VALID_CONFIG(8, DAHDI_CONFIG_CCS, "CCS"),
VALID_CONFIG(9, DAHDI_CONFIG_HDB3, "HDB3"),
VALID_CONFIG(10, DAHDI_CONFIG_CRC4, "CRC4"),
};
/*
* Mark the lines as CLEAR or RBS signalling.
* With T1, we need to mark the CLEAR lines on the REG_CCB1_T registers
* Should be called only when we are registered to DAHDI
* The channo parameter:
* channo == 0: set lines for the whole span
* channo != 0: only set modified lines
*/
static void set_rbslines(xpd_t *xpd, int channo)
{
struct PRI_priv_data *priv;
xpp_line_t new_rbslines = 0;
xpp_line_t modified_lines;
int i;
priv = xpd->priv;
for_each_line(xpd, i) {
struct dahdi_chan *chan = XPD_CHAN(xpd, i);
if (chan->flags & DAHDI_FLAG_CLEAR)
BIT_CLR(new_rbslines, i);
else
BIT_SET(new_rbslines, i);
}
new_rbslines &= BITMASK(PHONEDEV(xpd).channels);
modified_lines = priv->rbslines ^ new_rbslines;
XPD_DBG(DEVICES, xpd, "RBSLINES-%d(%s): 0x%X\n", channo,
pri_protocol_name(priv->pri_protocol), new_rbslines);
if ((priv->pri_protocol == PRI_PROTO_T1)
|| (priv->pri_protocol == PRI_PROTO_J1)) {
__u8 clear_lines = 0; /* Mark clear lines */
bool reg_changed = 0;
for_each_line(xpd, i) {
int bytenum = i / 8;
int bitnum = i % 8;
if (!IS_SET(new_rbslines, i))
BIT_SET(clear_lines, (7 - bitnum));
if (IS_SET(modified_lines, i))
reg_changed = 1;
if (bitnum == 7) {
if (channo == 0 || reg_changed) {
bytenum += REG_CCB1_T;
XPD_DBG(DEVICES, xpd,
"RBS(%s): modified=0x%X rbslines=0x%X reg=0x%X clear_lines=0x%X\n",
pri_protocol_name(priv->pri_protocol),
modified_lines, new_rbslines,
bytenum, clear_lines);
write_subunit(xpd, bytenum, clear_lines);
}
clear_lines = 0;
reg_changed = 0;
}
}
}
priv->rbslines = new_rbslines;
}
static int set_mode_cas(xpd_t *xpd, bool want_cas)
{
struct PRI_priv_data *priv;
priv = xpd->priv;
XPD_INFO(xpd, "Setting TDM to %s\n", (want_cas) ? "CAS" : "PRI");
if (want_cas) {
priv->is_cas = 1;
priv->dchan_alive = 0;
} else {
priv->is_cas = 0;
}
return 0;
}
static int pri_lineconfig(xpd_t *xpd, int lineconfig)
{
struct PRI_priv_data *priv;
const char *framingstr = "";
const char *codingstr = "";
const char *crcstr = "";
#ifdef JAPANEZE_SUPPORT
__u8 rc0 = 0; /* FIXME: PCM offsets */
#endif
__u8 fmr0 = 0;
__u8 fmr1 = REG_FMR1_ECM;
__u8 fmr2 = 0;
__u8 fmr3 = 0; /* write only for CRC4 */
__u8 fmr4 = 0;
__u8 cmdr = REG_CMDR_RRES | REG_CMDR_XRES;
__u8 xsp = 0;
unsigned int bad_bits;
bool force_cas = 0;
int i;
BUG_ON(!xpd);
priv = xpd->priv;
/*
* validate
*/
bad_bits = lineconfig & pri_linecompat(priv->pri_protocol);
bad_bits = bad_bits ^ lineconfig;
for (i = 0; i < ARRAY_SIZE(valid_spanconfigs); i++) {
unsigned int flags = valid_spanconfigs[i].flags;
if (bad_bits & BIT(i)) {
if (flags) {
XPD_ERR(xpd,
"Bad config item '%s' for %s. Ignore\n",
valid_spanconfigs[i].name,
pri_protocol_name(priv->pri_protocol));
} else {
/* we got real garbage */
XPD_ERR(xpd,
"Unknown config item 0x%lX for %s. "
"Ignore.\n",
BIT(i),
pri_protocol_name(priv->pri_protocol));
}
}
if (flags && flags != BIT(i)) {
ERR("%s: BUG: i=%d flags=0x%X\n", __func__, i, flags);
// BUG();
}
}
if (bad_bits)
goto bad_lineconfig;
if (priv->pri_protocol == PRI_PROTO_E1) {
fmr1 |= REG_FMR1_AFR;
fmr2 = REG_FMR2_E_AXRA | REG_FMR2_E_ALMF; /* 0x03 */
fmr4 = 0x9F; /* E1.XSW: All spare bits = 1 */
xsp |= REG_XSP_E_EBP | REG_XSP_E_AXS | REG_XSP_E_XSIF;
} else if (priv->pri_protocol == PRI_PROTO_T1) {
fmr1 |= REG_FMR1_PMOD | REG_FMR1_T_CRC;
fmr2 = REG_FMR2_T_SSP | REG_FMR2_T_AXRA; /* 0x22 */
fmr4 = 0x0C;
xsp &= ~REG_FMR5_T_XTM;
force_cas = 1; /* T1 - Chip always in CAS mode */
} else if (priv->pri_protocol == PRI_PROTO_J1) {
fmr1 |= REG_FMR1_PMOD;
fmr4 = 0x1C;
xsp &= ~REG_FMR5_T_XTM;
force_cas = 1; /* T1 - Chip always in CAS mode */
XPD_ERR(xpd, "J1 unsupported yet\n");
return -ENOSYS;
}
if (priv->local_loopback)
fmr2 |= REG_FMR2_E_PLB;
/* framing first */
if (lineconfig & DAHDI_CONFIG_B8ZS) {
framingstr = "B8ZS";
fmr0 =
REG_FMR0_E_XC1 | REG_FMR0_E_XC0 | REG_FMR0_E_RC1 |
REG_FMR0_E_RC0;
} else if (lineconfig & DAHDI_CONFIG_AMI) {
framingstr = "AMI";
fmr0 = REG_FMR0_E_XC1 | REG_FMR0_E_RC1;
/*
* From Infineon Errata Sheet: PEF 22554, Version 3.1
* Problem: Incorrect CAS Receiption when
* using AMI receive line code
* Workaround: For E1,
* "...The receive line coding HDB3 is
* recommended instead."
* For T1,
* "...in T1 mode it is recommended to
* configure the Rx side to B8ZS coding"
* For both cases this is the same bit in FMR0
*/
if (priv->pri_protocol == PRI_PROTO_J1)
XPD_NOTICE(xpd, "J1 is not supported yet\n");
else
fmr0 |= REG_FMR0_E_RC0;
} else if (lineconfig & DAHDI_CONFIG_HDB3) {
framingstr = "HDB3";
fmr0 =
REG_FMR0_E_XC1 | REG_FMR0_E_XC0 | REG_FMR0_E_RC1 |
REG_FMR0_E_RC0;
} else {
XPD_NOTICE(xpd,
"Bad lineconfig. Not (B8ZS|AMI|HDB3). Ignored.\n");
return -EINVAL;
}
/* then coding */
priv->is_esf = 0;
if (lineconfig & DAHDI_CONFIG_ESF) {
codingstr = "ESF";
fmr4 |= REG_FMR4_FM1;
fmr2 |= REG_FMR2_T_AXRA | REG_FMR2_T_MCSP | REG_FMR2_T_SSP;
priv->is_esf = 1;
} else if (lineconfig & DAHDI_CONFIG_D4) {
codingstr = "D4";
} else if (lineconfig & DAHDI_CONFIG_CCS) {
codingstr = "CCS";
/* In E1 we know right from the span statement. */
set_mode_cas(xpd, 0);
} else {
/* In E1 we know right from the span statement. */
codingstr = "CAS";
force_cas = 1;
set_mode_cas(xpd, 1);
}
CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0);
/*
* E1's can enable CRC checking
* CRC4 is legal only for E1, and it is checked by pri_linecompat()
* in the beginning of the function.
*/
if (lineconfig & DAHDI_CONFIG_CRC4) {
crcstr = "CRC4";
fmr1 |= REG_FMR1_E_XFS;
fmr2 |= REG_FMR2_E_RFS1;
fmr3 |= REG_FMR3_EXTIW;
}
XPD_DBG(GENERAL, xpd, "[%s] lineconfig=%s/%s/%s %s (0x%X)\n",
(priv->clock_source) ? "MASTER" : "SLAVE", framingstr,
codingstr, crcstr,
(lineconfig & DAHDI_CONFIG_NOTOPEN) ? "YELLOW" : "",
lineconfig);
set_reg_lim0(__func__, xpd);
XPD_DBG(GENERAL, xpd, "%s: fmr1(0x%02X) = 0x%02X\n", __func__, REG_FMR1,
fmr1);
write_subunit(xpd, REG_FMR1, fmr1);
XPD_DBG(GENERAL, xpd, "%s: fmr2(0x%02X) = 0x%02X\n", __func__, REG_FMR2,
fmr2);
write_subunit(xpd, REG_FMR2, fmr2);
XPD_DBG(GENERAL, xpd, "%s: fmr0(0x%02X) = 0x%02X\n", __func__, REG_FMR0,
fmr0);
write_subunit(xpd, REG_FMR0, fmr0);
XPD_DBG(GENERAL, xpd, "%s: fmr4(0x%02X) = 0x%02X\n", __func__, REG_FMR4,
fmr4);
write_subunit(xpd, REG_FMR4, fmr4);
if (fmr3) {
XPD_DBG(GENERAL, xpd, "%s: fmr3(0x%02X) = 0x%02X\n", __func__,
REG_FMR3, fmr3);
write_subunit(xpd, REG_FMR3, fmr3);
}
XPD_DBG(GENERAL, xpd, "%s: cmdr(0x%02X) = 0x%02X\n", __func__,
REG_CMDR_E, cmdr);
write_subunit(xpd, REG_CMDR_E, cmdr);
#ifdef JAPANEZE_SUPPORT
if (rc0) {
XPD_DBG(GENERAL, xpd, "%s: rc0(0x%02X) = 0x%02X\n", __func__,
REG_RC0, rc0);
write_subunit(xpd, REG_RC0, rc0);
}
#endif
if (force_cas) {
if (priv->pri_protocol == PRI_PROTO_E1) {
int rs1 = 0x0B;
/*
* Set correct X1-X3 bits in the E1 CAS MFAS
* They are unused in E1 and should be 1
*/
XPD_DBG(GENERAL, xpd, "%s: rs1(0x%02X) = 0x%02X\n",
__func__, REG_RS1_E, rs1);
write_subunit(xpd, REG_RS1_E, rs1);
}
xsp |= REG_XSP_E_CASEN; /* Same as REG_FMR5_T_EIBR for T1 */
}
XPD_DBG(GENERAL, xpd, "%s: xsp(0x%02X) = 0x%02X\n", __func__, REG_XSP_E,
xsp);
write_subunit(xpd, REG_XSP_E, xsp);
return 0;
bad_lineconfig:
XPD_ERR(xpd, "Bad lineconfig. Abort\n");
return -EINVAL;
}
static int pri_set_spantype(struct dahdi_span *span, enum spantypes spantype)
{
struct phonedev *phonedev = container_of(span, struct phonedev, span);
xpd_t *xpd = container_of(phonedev, struct xpd, phonedev);
enum pri_protocol set_proto = PRI_PROTO_0;
int ret;
XPD_INFO(xpd, "%s: %s\n", __func__, dahdi_spantype2str(spantype));
switch (spantype) {
case SPANTYPE_DIGITAL_E1:
set_proto = PRI_PROTO_E1;
break;
case SPANTYPE_DIGITAL_T1:
set_proto = PRI_PROTO_T1;
break;
case SPANTYPE_DIGITAL_J1:
set_proto = PRI_PROTO_J1;
break;
default:
XPD_NOTICE(xpd, "%s: bad spantype '%s'\n",
__func__, dahdi_spantype2str(spantype));
return -EINVAL;
}
ret = set_pri_proto(xpd, set_proto);
if (ret < 0) {
XPD_ERR(xpd, "%s: set_pri_proto failed\n", __func__);
return ret;
}
dahdi_init_span(span);
return 0;
}
static int PRI_card_open(xpd_t *xpd, lineno_t pos)
{
struct PRI_priv_data *priv;
int d;
/*
* DAHDI without AUDIO_NOTIFY.
* Need to offhook all channels when D-Chan is up
*/
priv = xpd->priv;
d = PRI_DCHAN_IDX(priv);
BUG_ON(!xpd);
if (pos == d) {
#ifndef DAHDI_AUDIO_NOTIFY
int i;
LINE_DBG(SIGNAL, xpd, pos, "OFFHOOK the whole span\n");
for_each_line(xpd, i) {
if (i != d)
BIT_SET(PHONEDEV(xpd).offhook_state, i);
}
CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0);
#endif
priv->dchan_is_open = 1;
}
return 0;
}
static int PRI_card_close(xpd_t *xpd, lineno_t pos)
{
struct PRI_priv_data *priv;
int d, i;
priv = xpd->priv;
d = PRI_DCHAN_IDX(priv);
BUG_ON(!xpd);
if (pos == d) {
LINE_DBG(SIGNAL, xpd, pos, "OFFHOOK the whole span\n");
for_each_line(xpd, i) {
if (i != d)
BIT_CLR(PHONEDEV(xpd).offhook_state, i);
}
CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0);
dchan_state(xpd, 0);
priv->dchan_is_open = 0;
} else if (!priv->dchan_is_open)
mark_offhook(xpd, pos, 0); /* e.g: patgen/pattest */
return 0;
}
/*
* Called only for 'span' keyword in /etc/dahdi/system.conf
*/
static int pri_spanconfig(struct file *file, struct dahdi_span *span,
struct dahdi_lineconfig *lc)
{
struct phonedev *phonedev = container_of(span, struct phonedev, span);
xpd_t *xpd = container_of(phonedev, struct xpd, phonedev);
struct PRI_priv_data *priv;
int ret;
BUG_ON(!xpd);
priv = xpd->priv;
if (lc->span != PHONEDEV(xpd).span.spanno) {
XPD_ERR(xpd, "I am span %d but got spanconfig for span %d\n",
PHONEDEV(xpd).span.spanno, lc->span);
return -EINVAL;
}
/*
* FIXME: lc->name is unused by dahdi_cfg and dahdi...
* We currently ignore it also.
*/
XPD_DBG(GENERAL, xpd, "[%s] lbo=%d lineconfig=0x%X sync=%d\n",
(priv->clock_source) ? "MASTER" : "SLAVE", lc->lbo,
lc->lineconfig, lc->sync);
ret = pri_lineconfig(xpd, lc->lineconfig);
if (!ret) {
span->lineconfig = lc->lineconfig;
PHONEDEV(xpd).timing_priority = lc->sync;
set_master_mode("spanconfig", xpd);
elect_syncer("PRI-master_mode");
}
return ret;
}
/*
* Set signalling type (if appropriate)
* Called from dahdi with spinlock held on chan. Must not call back
* dahdi functions.
*/
static int pri_chanconfig(struct file *file, struct dahdi_chan *chan,
int sigtype)
{
struct phonedev *phonedev =
container_of(chan->span, struct phonedev, span);
xpd_t *xpd = container_of(phonedev, struct xpd, phonedev);
struct PRI_priv_data *priv;
BUG_ON(!xpd);
priv = xpd->priv;
DBG(GENERAL, "channel %d (%s) -> %s\n", chan->channo, chan->name,
sig2str(sigtype));
/*
* Some bookkeeping to check if we have DChan defined or not
* FIXME: actually use this to prevent duplicate DChan definitions
* and prevent DChan definitions with CAS.
*/
if (is_sigtype_dchan(sigtype)) {
if (VALID_DCHAN(priv) && DCHAN(priv) != chan->channo) {
ERR("channel %d (%s) marked DChan but "
"also channel %d.\n",
chan->channo, chan->name, DCHAN(priv));
return -EINVAL;
}
XPD_DBG(GENERAL, xpd, "channel %d (%s) marked as DChan\n",
chan->channo, chan->name);
SET_DCHAN(priv, chan->channo);
/* In T1, we don't know before-hand */
if (priv->pri_protocol != PRI_PROTO_E1 && priv->is_cas != 0)
set_mode_cas(xpd, 0);
} else {
if (chan->chanpos == 1) {
XPD_DBG(GENERAL, xpd,
"channel %d (%s) marked a not DChan\n",
chan->channo, chan->name);
SET_DCHAN(priv, NO_DCHAN);
}
/* In T1, we don't know before-hand */
if (priv->pri_protocol != PRI_PROTO_E1 && priv->is_cas != 1)
set_mode_cas(xpd, 1);
}
if (PHONEDEV(xpd).span.flags & DAHDI_FLAG_RUNNING) {
XPD_DBG(DEVICES, xpd, "Span is RUNNING. Updating rbslines.\n");
set_rbslines(xpd, chan->channo);
}
// FIXME: sanity checks:
// - should be supported (within the sigcap)
// - should not replace fxs <->fxo ??? (covered by previous?)
return 0;
}
static xpd_t *PRI_card_new(xbus_t *xbus, int unit, int subunit,
const xproto_table_t *proto_table, __u8 subtype,
int subunits, int subunit_ports, bool to_phone)
{
xpd_t *xpd = NULL;
struct PRI_priv_data *priv;
int channels = min(31, CHANNELS_PERXPD); /* worst case */
if (subunit_ports != 1) {
XBUS_ERR(xbus, "Bad subunit_ports=%d\n", subunit_ports);
return NULL;
}
XBUS_DBG(GENERAL, xbus, "\n");
xpd =
xpd_alloc(xbus, unit, subunit, subtype, subunits,
sizeof(struct PRI_priv_data), proto_table, channels);
if (!xpd)
return NULL;
priv = xpd->priv;
/* Default, changes in set_pri_proto() */
priv->pri_protocol = PRI_PROTO_0;
/* Default, changes in set_pri_proto() */
priv->deflaw = DAHDI_LAW_DEFAULT;
xpd->type_name = type_name(priv->pri_protocol);
xbus->sync_mode_default = SYNC_MODE_AB;
return xpd;
}
static int PRI_card_init(xbus_t *xbus, xpd_t *xpd)
{
struct PRI_priv_data *priv;
int ret = 0;
BUG_ON(!xpd);
XPD_DBG(GENERAL, xpd, "\n");
xpd->xpd_type = XPD_TYPE_PRI;
priv = xpd->priv;
if (priv->pri_protocol == PRI_PROTO_0) {
/*
* init_card_* script didn't set pri protocol
* Let's have a default E1
*/
ret = set_pri_proto(xpd, PRI_PROTO_E1);
if (ret < 0)
goto err;
}
SET_DCHAN(priv, NO_DCHAN);
/*
* initialization script should have set correct
* operating modes.
*/
if (!valid_pri_modes(xpd)) {
XPD_NOTICE(xpd, "PRI protocol not set\n");
goto err;
}
xpd->type_name = type_name(priv->pri_protocol);
PHONEDEV(xpd).direction = TO_PSTN;
XPD_DBG(DEVICES, xpd, "%s\n", xpd->type_name);
PHONEDEV(xpd).timing_priority = 1; /* High priority SLAVE */
set_master_mode(__func__, xpd);
for (ret = 0; ret < NUM_LEDS; ret++) {
DO_LED(xpd, ret, PRI_LED_ON);
msleep(20);
DO_LED(xpd, ret, PRI_LED_OFF);
}
priv->initialized = 1;
priv->dchan_is_open = 0;
return 0;
err:
XPD_ERR(xpd, "Failed initializing registers (%d)\n", ret);
return ret;
}
static int PRI_card_remove(xbus_t *xbus, xpd_t *xpd)
{
BUG_ON(!xpd);
XPD_DBG(GENERAL, xpd, "\n");
return 0;
}
#ifdef DAHDI_AUDIO_NOTIFY
static int pri_audio_notify(struct dahdi_chan *chan, int on)
{
xpd_t *xpd = chan->pvt;
int pos = chan->chanpos - 1;
BUG_ON(!xpd);
LINE_DBG(SIGNAL, xpd, pos, "PRI-AUDIO: %s\n", (on) ? "on" : "off");
mark_offhook(xpd, pos, on);
return 0;
}
#endif
static const struct dahdi_span_ops PRI_span_ops = {
.owner = THIS_MODULE,
.set_spantype = pri_set_spantype,
.spanconfig = pri_spanconfig,
.chanconfig = pri_chanconfig,
.startup = pri_startup,
.shutdown = pri_shutdown,
.rbsbits = pri_rbsbits,
.open = xpp_open,
.close = xpp_close,
.ioctl = xpp_ioctl,
.maint = xpp_maint,
.echocan_create = xpp_echocan_create,
.echocan_name = xpp_echocan_name,
.assigned = xpp_span_assigned,
#ifdef DAHDI_SYNC_TICK
.sync_tick = dahdi_sync_tick,
#endif
#ifdef CONFIG_DAHDI_WATCHDOG
.watchdog = xpp_watchdog,
#endif
#ifdef DAHDI_AUDIO_NOTIFY
.audio_notify = pri_audio_notify,
#endif
};
static int apply_pri_protocol(xpd_t *xpd)
{
xbus_t *xbus;
struct PRI_priv_data *priv;
int i;
BUG_ON(!xpd);
xbus = xpd->xbus;
priv = xpd->priv;
BUG_ON(!xbus);
XPD_DBG(GENERAL, xpd, "\n");
PHONEDEV(xpd).span.spantype = pri_protocol2spantype(priv->pri_protocol);
PHONEDEV(xpd).span.linecompat = pri_linecompat(priv->pri_protocol);
PHONEDEV(xpd).span.deflaw = priv->deflaw;
PHONEDEV(xpd).span.alarms = DAHDI_ALARM_NONE;
for_each_line(xpd, i) {
struct dahdi_chan *cur_chan = XPD_CHAN(xpd, i);
bool is_dchan = i == PRI_DCHAN_IDX(priv);
XPD_DBG(GENERAL, xpd, "setting PRI channel %d (%s)\n", i,
(is_dchan) ? "DCHAN" : "CLEAR");
snprintf(cur_chan->name, MAX_CHANNAME, "XPP_%s/%02d/%1d%1d/%d",
xpd->type_name, xbus->num, xpd->addr.unit,
xpd->addr.subunit, i);
cur_chan->chanpos = i + 1;
cur_chan->pvt = xpd;
cur_chan->sigcap = PRI_SIGCAP;
if (is_dchan && !priv->is_cas) { /* D-CHAN */
//FIXME: cur_chan->flags |= DAHDI_FLAG_PRIDCHAN;
cur_chan->flags &= ~DAHDI_FLAG_HDLC;
}
}
PHONEDEV(xpd).offhook_state = PHONEDEV(xpd).wanted_pcm_mask;
PHONEDEV(xpd).span.ops = &PRI_span_ops;
PHONEDEV(xpd).span.channels = PHONEDEV(xpd).channels;
xpd_set_spanname(xpd);
return 0;
}
static int PRI_card_dahdi_preregistration(xpd_t *xpd, bool on)
{
xbus_t *xbus;
struct PRI_priv_data *priv;
BUG_ON(!xpd);
xbus = xpd->xbus;
priv = xpd->priv;
BUG_ON(!xbus);
XPD_DBG(GENERAL, xpd, "%s (proto=%s, channels=%d, deflaw=%d)\n",
(on) ? "on" : "off", pri_protocol_name(priv->pri_protocol),
PHONEDEV(xpd).channels, priv->deflaw);
if (!on) {
/* Nothing to do yet */
return 0;
}
return apply_pri_protocol(xpd);
}
static int PRI_card_dahdi_postregistration(xpd_t *xpd, bool on)
{
xbus_t *xbus;
BUG_ON(!xpd);
xbus = xpd->xbus;
BUG_ON(!xbus);
XPD_DBG(GENERAL, xpd, "%s\n", (on) ? "on" : "off");
dahdi_update_syncsrc(xpd);
return (0);
}
static void dchan_state(xpd_t *xpd, bool up)
{
struct PRI_priv_data *priv;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
if (priv->is_cas)
return;
if (priv->dchan_alive == up)
return;
if (!priv->layer1_up) /* No layer1, kill dchan */
up = 0;
if (up) {
XPD_DBG(SIGNAL, xpd, "STATE CHANGE: D-Channel RUNNING\n");
priv->dchan_alive = 1;
} else {
int d = PRI_DCHAN_IDX(priv);
if (SPAN_REGISTERED(xpd) && d >= 0
&& d < PHONEDEV(xpd).channels) {
__u8 *pcm;
pcm = (__u8 *)XPD_CHAN(xpd, d)->readchunk;
pcm[0] = 0x00;
pcm = (__u8 *)XPD_CHAN(xpd, d)->writechunk;
pcm[0] = 0x00;
}
XPD_DBG(SIGNAL, xpd, "STATE CHANGE: D-Channel STOPPED\n");
priv->dchan_rx_counter = priv->dchan_tx_counter = 0;
priv->dchan_alive = 0;
priv->dchan_alive_ticks = 0;
priv->dchan_rx_sample = priv->dchan_tx_sample = 0x00;
}
}
/*
* LED managment is done by the driver now:
* - Turn constant ON RED/GREEN led to indicate MASTER/SLAVE port
* - Very fast "Double Blink" to indicate Layer1 alive (without D-Channel)
* - Constant blink (1/2 sec cycle) to indicate D-Channel alive.
*/
static void handle_leds(xbus_t *xbus, xpd_t *xpd)
{
struct PRI_priv_data *priv;
unsigned int timer_count;
int which_led;
int other_led;
enum pri_led_state ledstate;
int mod;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
if (PHONEDEV(xpd).timing_priority == 0) {
which_led = TOP_RED_LED;
other_led = BOTTOM_GREEN_LED;
} else {
which_led = BOTTOM_GREEN_LED;
other_led = TOP_RED_LED;
}
ledstate = priv->ledstate[which_led];
timer_count = xpd->timer_count;
if (xpd->blink_mode) {
if ((timer_count % DEFAULT_LED_PERIOD) == 0) {
// led state is toggled
if (ledstate == PRI_LED_OFF) {
DO_LED(xpd, which_led, PRI_LED_ON);
DO_LED(xpd, other_led, PRI_LED_ON);
} else {
DO_LED(xpd, which_led, PRI_LED_OFF);
DO_LED(xpd, other_led, PRI_LED_OFF);
}
}
return;
}
if (priv->ledstate[other_led] != PRI_LED_OFF)
DO_LED(xpd, other_led, PRI_LED_OFF);
if (priv->dchan_alive) {
mod = timer_count % 1000;
switch (mod) {
case 0:
DO_LED(xpd, which_led, PRI_LED_ON);
break;
case 500:
DO_LED(xpd, which_led, PRI_LED_OFF);
break;
}
} else if (priv->layer1_up) {
mod = timer_count % 1000;
switch (mod) {
case 0:
case 100:
DO_LED(xpd, which_led, PRI_LED_ON);
break;
case 50:
case 150:
DO_LED(xpd, which_led, PRI_LED_OFF);
break;
}
} else {
if (priv->ledstate[which_led] != PRI_LED_ON)
DO_LED(xpd, which_led, PRI_LED_ON);
}
}
static int PRI_card_tick(xbus_t *xbus, xpd_t *xpd)
{
struct PRI_priv_data *priv;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
if (!priv->initialized || !xbus->self_ticking)
return 0;
/*
* Poll layer1 status (cascade subunits)
*/
if (poll_interval != 0 && ((xpd->timer_count % poll_interval) == 0)) {
priv->poll_noreplies++;
query_subunit(xpd, REG_FRS0);
//query_subunit(xpd, REG_FRS1);
}
if (priv->dchan_tx_counter >= 1 && priv->dchan_rx_counter > 1) {
dchan_state(xpd, 1);
priv->dchan_alive_ticks++;
}
handle_leds(xbus, xpd);
return 0;
}
static int PRI_card_ioctl(xpd_t *xpd, int pos, unsigned int cmd,
unsigned long arg)
{
struct dahdi_chan *chan;
BUG_ON(!xpd);
if (!XBUS_IS(xpd->xbus, READY))
return -ENODEV;
chan = XPD_CHAN(xpd, pos);
switch (cmd) {
/*
* Asterisk may send FXS type ioctl()'s to us:
* - Some are sent to everybody (DAHDI_TONEDETECT)
* - Some are sent because we may be in CAS mode
* (FXS signalling)
* Ignore them.
*/
case DAHDI_TONEDETECT:
LINE_DBG(SIGNAL, xpd, pos, "PRI: TONEDETECT (%s)\n",
(chan->
flags & DAHDI_FLAG_AUDIO) ? "AUDIO" : "SILENCE");
return -ENOTTY;
case DAHDI_ONHOOKTRANSFER:
LINE_DBG(SIGNAL, xpd, pos, "PRI: ONHOOKTRANSFER\n");
return -ENOTTY;
case DAHDI_VMWI:
LINE_DBG(SIGNAL, xpd, pos, "PRI: VMWI\n");
return -ENOTTY;
case DAHDI_VMWI_CONFIG:
LINE_DBG(SIGNAL, xpd, pos, "PRI: VMWI_CONFIG\n");
return -ENOTTY;
case DAHDI_SETPOLARITY:
LINE_DBG(SIGNAL, xpd, pos, "PRI: SETPOLARITY\n");
return -ENOTTY;
/* report on really bad ioctl()'s */
default:
report_bad_ioctl(THIS_MODULE->name, xpd, pos, cmd);
return -ENOTTY;
}
return 0;
}
/*
* Called only for 'span' keyword in /etc/dahdi/system.conf
*/
static int pri_startup(struct file *file, struct dahdi_span *span)
{
struct phonedev *phonedev = container_of(span, struct phonedev, span);
xpd_t *xpd = container_of(phonedev, struct xpd, phonedev);
struct PRI_priv_data *priv;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
if (!XBUS_IS(xpd->xbus, READY)) {
XPD_DBG(GENERAL, xpd,
"Startup called by dahdi. No Hardware. Ignored\n");
return -ENODEV;
}
XPD_DBG(GENERAL, xpd, "STARTUP\n");
// Turn on all channels
CALL_PHONE_METHOD(card_state, xpd, 1);
set_rbslines(xpd, 0);
write_subunit(xpd, REG_XPM2, 0x00);
return 0;
}
/*
* Called only for 'span' keyword in /etc/dahdi/system.conf
*/
static int pri_shutdown(struct dahdi_span *span)
{
struct phonedev *phonedev = container_of(span, struct phonedev, span);
xpd_t *xpd = container_of(phonedev, struct xpd, phonedev);
struct PRI_priv_data *priv;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
if (!XBUS_IS(xpd->xbus, READY)) {
XPD_DBG(GENERAL, xpd,
"Shutdown called by dahdi. No Hardware. Ignored\n");
return -ENODEV;
}
XPD_DBG(GENERAL, xpd, "SHUTDOWN\n");
// Turn off all channels
CALL_PHONE_METHOD(card_state, xpd, 0);
return 0;
}
static int encode_rbsbits_e1(xpd_t *xpd, int pos, int bits)
{
struct PRI_priv_data *priv;
__u8 val;
int rsnum;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
BUG_ON(priv->pri_protocol != PRI_PROTO_E1);
if (pos == 15)
return 0; /* Don't write dchan in CAS */
if (pos < 0 || pos > 31) {
XPD_NOTICE(xpd, "%s: pos=%d out of range. Ignore\n", __func__,
pos);
return 0;
}
if (pos >= 16) {
/* Low nibble */
rsnum = pos - 16;
val = (priv->cas_ts_e[rsnum] & 0xF0) | (bits & 0x0F);
} else {
/* High nibble */
rsnum = pos;
val = (priv->cas_ts_e[rsnum] & 0x0F) | ((bits << 4) & 0xF0);
}
LINE_DBG(SIGNAL, xpd, pos, "RBS: TX: bits=0x%X\n", bits);
write_cas_reg(xpd, rsnum, val);
return 0;
}
static int encode_rbsbits_t1(xpd_t *xpd, int pos, int bits)
{
struct PRI_priv_data *priv;
int rsnum;
int chan_per_reg;
int offset;
int width;
uint tx_bits = bits;
uint mask;
__u8 val;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
BUG_ON(priv->pri_protocol != PRI_PROTO_T1);
if (pos < 0 || pos >= PHONEDEV(xpd).channels) {
XPD_ERR(xpd, "%s: Bad pos=%d\n", __func__, pos);
return 0;
}
chan_per_reg = CHAN_PER_REGS(priv);
width = 8 / chan_per_reg;
rsnum = pos / chan_per_reg;
offset = pos % chan_per_reg;
mask = BITMASK(width) << (chan_per_reg - offset - 1) * width;
if (!priv->is_esf)
tx_bits >>= 2;
tx_bits &= BITMASK(width);
tx_bits <<= (chan_per_reg - offset - 1) * width;
val = priv->cas_ts_e[rsnum];
val &= ~mask;
val |= tx_bits;
LINE_DBG(SIGNAL, xpd, pos,
"bits=0x%02X RS%02d(%s) offset=%d tx_bits=0x%02X\n", bits,
rsnum + 1, (priv->is_esf) ? "esf" : "d4", offset, tx_bits);
write_cas_reg(xpd, rsnum, val);
priv->dchan_tx_counter++;
return 0;
}
static void send_idlebits(xpd_t *xpd, bool saveold)
{
struct PRI_priv_data *priv;
__u8 save_rs[NUM_CAS_RS_E];
int i;
if (!SPAN_REGISTERED(xpd))
return;
priv = xpd->priv;
BUG_ON(!priv);
XPD_DBG(SIGNAL, xpd, "saveold=%d\n", saveold);
if (saveold)
memcpy(save_rs, priv->cas_ts_e, sizeof(save_rs));
for_each_line(xpd, i) {
struct dahdi_chan *chan = XPD_CHAN(xpd, i);
pri_rbsbits(chan, chan->idlebits);
}
if (saveold)
memcpy(priv->cas_ts_e, save_rs, sizeof(save_rs));
}
static void send_oldbits(xpd_t *xpd)
{
struct PRI_priv_data *priv;
int i;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
XPD_DBG(SIGNAL, xpd, "\n");
for (i = 0; i < cas_numregs(xpd); i++)
write_cas_reg(xpd, i, priv->cas_ts_e[i]);
}
static int pri_rbsbits(struct dahdi_chan *chan, int bits)
{
xpd_t *xpd;
struct PRI_priv_data *priv;
int pos;
xpd = chan->pvt;
BUG_ON(!xpd);
pos = chan->chanpos - 1;
priv = xpd->priv;
BUG_ON(!priv);
if (!priv->is_cas) {
XPD_DBG(SIGNAL, xpd, "RBS: TX: not in CAS mode. Ignore.\n");
return 0;
}
if (chan->sig == DAHDI_SIG_NONE) {
LINE_DBG(SIGNAL, xpd, pos,
"RBS: TX: sigtyp=%s. , bits=0x%X. Ignore.\n",
sig2str(chan->sig), bits);
return 0;
}
if (!priv->layer1_up)
XPD_DBG(SIGNAL, xpd, "RBS: TX: No layer1 yet. Keep going.\n");
if (priv->pri_protocol == PRI_PROTO_E1) {
if (encode_rbsbits_e1(xpd, pos, bits) < 0)
return -EINVAL;
} else if (priv->pri_protocol == PRI_PROTO_T1) {
if (encode_rbsbits_t1(xpd, pos, bits) < 0)
return -EINVAL;
} else {
XPD_NOTICE(xpd,
"%s: protocol %s is not supported yet with CAS\n",
__func__, pri_protocol_name(priv->pri_protocol));
return -EINVAL;
}
return 0;
}
/*! Copy PCM chunks from the buffers of the xpd to a new packet
* \param xbus xbus of source xpd.
* \param xpd source xpd.
* \param lines a bitmask of the active channels that need to be copied.
* \param pack packet to be filled.
*
* On PRI this function is should also shift the lines mask one bit, as
* channel 0 on the wire is an internal chip control channel. We only
* send 31 channels to the device, but they should be called 1-31 rather
* than 0-30 .
*/
static void PRI_card_pcm_fromspan(xpd_t *xpd, xpacket_t *pack)
{
struct PRI_priv_data *priv;
__u8 *pcm;
unsigned long flags;
int i;
xpp_line_t wanted_lines;
int physical_chan;
int physical_mask = 0;
BUG_ON(!xpd);
BUG_ON(!pack);
priv = xpd->priv;
BUG_ON(!priv);
pcm = RPACKET_FIELD(pack, GLOBAL, PCM_WRITE, pcm);
spin_lock_irqsave(&xpd->lock, flags);
wanted_lines = PHONEDEV(xpd).wanted_pcm_mask;
physical_chan = 0;
for_each_line(xpd, i) {
struct dahdi_chan *chan = XPD_CHAN(xpd, i);
if (priv->pri_protocol == PRI_PROTO_E1) {
/* In E1 - Only 0'th channel is unused */
if (i == 0)
physical_chan++;
} else if (priv->pri_protocol == PRI_PROTO_T1) {
/* In T1 - Every 4'th channel is unused */
if ((i % 3) == 0)
physical_chan++;
}
if (IS_SET(wanted_lines, i)) {
physical_mask |= BIT(physical_chan);
if (SPAN_REGISTERED(xpd)) {
#ifdef DEBUG_PCMTX
int channo = XPD_CHAN(xpd, i)->channo;
if (pcmtx >= 0 && pcmtx_chan == channo)
memset((u_char *)pcm, pcmtx,
DAHDI_CHUNKSIZE);
else
#endif
memcpy((u_char *)pcm, chan->writechunk,
DAHDI_CHUNKSIZE);
if (i == PRI_DCHAN_IDX(priv)) {
if (priv->dchan_tx_sample !=
chan->writechunk[0]) {
priv->dchan_tx_sample =
chan->writechunk[0];
priv->dchan_tx_counter++;
} else if (chan->writechunk[0] == 0xFF)
dchan_state(xpd, 0);
else
/* Clobber for next tick */
chan->writechunk[0] = 0xFF;
}
} else
memset((u_char *)pcm, DAHDI_XLAW(0, chan),
DAHDI_CHUNKSIZE);
pcm += DAHDI_CHUNKSIZE;
}
physical_chan++;
}
RPACKET_FIELD(pack, GLOBAL, PCM_WRITE, lines) = physical_mask;
XPD_COUNTER(xpd, PCM_WRITE)++;
spin_unlock_irqrestore(&xpd->lock, flags);
}
/*! Copy PCM chunks from the packet we received to the xpd struct.
* \param xbus xbus of target xpd.
* \param xpd target xpd.
* \param pack Source packet.
*
* On PRI this function is should also shift the lines back mask one bit, as
* channel 0 on the wire is an internal chip control channel.
*
* \see PRI_card_pcm_fromspan
*/
static void PRI_card_pcm_tospan(xpd_t *xpd, xpacket_t *pack)
{
struct PRI_priv_data *priv;
__u8 *pcm;
xpp_line_t physical_mask;
unsigned long flags;
int i;
int logical_chan;
if (!SPAN_REGISTERED(xpd))
return;
priv = xpd->priv;
BUG_ON(!priv);
pcm = RPACKET_FIELD(pack, GLOBAL, PCM_READ, pcm);
physical_mask = RPACKET_FIELD(pack, GLOBAL, PCM_WRITE, lines);
spin_lock_irqsave(&xpd->lock, flags);
logical_chan = 0;
for (i = 0; i < CHANNELS_PERXPD; i++) {
volatile u_char *r;
if (priv->pri_protocol == PRI_PROTO_E1) {
/* In E1 - Only 0'th channel is unused */
if (i == 0)
continue;
} else if (priv->pri_protocol == PRI_PROTO_T1) {
/* In T1 - Every 4'th channel is unused */
if ((i % 4) == 0)
continue;
}
if (logical_chan == PRI_DCHAN_IDX(priv) && !priv->is_cas) {
if (priv->dchan_rx_sample != pcm[0]) {
if (debug & DBG_PCM) {
XPD_INFO(xpd,
"RX-D-Chan: prev=0x%X now=0x%X\n",
priv->dchan_rx_sample, pcm[0]);
dump_packet("RX-D-Chan", pack, 1);
}
priv->dchan_rx_sample = pcm[0];
priv->dchan_rx_counter++;
} else if (pcm[0] == 0xFF)
dchan_state(xpd, 0);
}
if (IS_SET(physical_mask, i)) {
struct dahdi_chan *chan = XPD_CHAN(xpd, logical_chan);
r = chan->readchunk;
// memset((u_char *)r, 0x5A, DAHDI_CHUNKSIZE); // DEBUG
memcpy((u_char *)r, pcm, DAHDI_CHUNKSIZE);
pcm += DAHDI_CHUNKSIZE;
}
logical_chan++;
}
XPD_COUNTER(xpd, PCM_READ)++;
spin_unlock_irqrestore(&xpd->lock, flags);
}
static int PRI_timing_priority(xpd_t *xpd)
{
struct PRI_priv_data *priv;
priv = xpd->priv;
BUG_ON(!priv);
if (priv->layer1_up)
return PHONEDEV(xpd).timing_priority;
XPD_DBG(SYNC, xpd, "No timing priority (no layer1)\n");
return -ENOENT;
}
static int PRI_echocancel_timeslot(xpd_t *xpd, int pos)
{
/*
* Skip ts=0 (used for PRI sync)
*/
return (1 + pos) * 4 + xpd->addr.subunit;
}
static int PRI_echocancel_setmask(xpd_t *xpd, xpp_line_t ec_mask)
{
struct PRI_priv_data *priv;
int i;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
XPD_DBG(GENERAL, xpd, "0x%8X\n", ec_mask);
if (!ECHOOPS(xpd->xbus)) {
XPD_DBG(GENERAL, xpd,
"No echo canceller in XBUS: Doing nothing.\n");
return -EINVAL;
}
for (i = 0; i < PHONEDEV(xpd).channels; i++) {
int on = BIT(i) & ec_mask;
if (i == PRI_DCHAN_IDX(priv))
on = 0;
CALL_EC_METHOD(ec_set, xpd->xbus, xpd, i, on);
}
CALL_EC_METHOD(ec_update, xpd->xbus, xpd->xbus);
return 0;
}
/*---------------- PRI: HOST COMMANDS -------------------------------------*/
static /* 0x33 */ HOSTCMD(PRI, SET_LED, enum pri_led_selectors led_sel,
enum pri_led_state to_led_state)
{
int ret = 0;
xframe_t *xframe;
xpacket_t *pack;
struct pri_leds *pri_leds;
struct PRI_priv_data *priv;
BUG_ON(!xbus);
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
XPD_DBG(LEDS, xpd, "led_sel=%d to_state=%d\n", led_sel, to_led_state);
XFRAME_NEW_CMD(xframe, pack, xbus, PRI, SET_LED, xpd->xbus_idx);
pri_leds = &RPACKET_FIELD(pack, PRI, SET_LED, pri_leds);
pri_leds->state = to_led_state;
pri_leds->led_sel = led_sel;
pri_leds->reserved = 0;
XPACKET_LEN(pack) = RPACKET_SIZE(PRI, SET_LED);
ret = send_cmd_frame(xbus, xframe);
priv->ledstate[led_sel] = to_led_state;
return ret;
}
/*---------------- PRI: Astribank Reply Handlers --------------------------*/
static void layer1_state(xpd_t *xpd, __u8 data_low)
{
struct PRI_priv_data *priv;
int alarms = DAHDI_ALARM_NONE;
int layer1_up_prev;
BUG_ON(!xpd);
priv = xpd->priv;
BUG_ON(!priv);
priv->poll_noreplies = 0;
if (data_low & REG_FRS0_LOS)
alarms |= DAHDI_ALARM_RED;
if (data_low & REG_FRS0_AIS)
alarms |= DAHDI_ALARM_BLUE;
if (data_low & REG_FRS0_RRA)
alarms |= DAHDI_ALARM_YELLOW;
layer1_up_prev = priv->layer1_up;
priv->layer1_up = alarms == DAHDI_ALARM_NONE;
#if 0
/*
* Some bad bits (e.g: LMFA and NMF have no alarm "colors"
* associated. However, layer1 is still not working if they are set.
* FIXME: These behave differently in E1/T1, so ignore them for while.
*/
if (data_low & (REG_FRS0_LMFA | REG_FRS0_E1_NMF))
priv->layer1_up = 0;
#endif
priv->alarms = alarms;
if (!priv->layer1_up) {
dchan_state(xpd, 0);
} else if (priv->is_cas && !layer1_up_prev) {
int regbase = cas_regbase(xpd);
int i;
XPD_DBG(SIGNAL, xpd,
"Returning From Alarm Refreshing Rx register data \n");
for (i = 0; i < cas_numregs(xpd); i++)
query_subunit(xpd, regbase + i);
}
if (SPAN_REGISTERED(xpd) && PHONEDEV(xpd).span.alarms != alarms) {
char str1[MAX_PROC_WRITE];
char str2[MAX_PROC_WRITE];
alarm2str(PHONEDEV(xpd).span.alarms, str1, sizeof(str1));
alarm2str(alarms, str2, sizeof(str2));
XPD_NOTICE(xpd, "Alarms: 0x%X (%s) => 0x%X (%s)\n",
PHONEDEV(xpd).span.alarms, str1, alarms, str2);
if (priv->is_cas) {
if (alarms == DAHDI_ALARM_NONE)
send_oldbits(xpd);
else if (PHONEDEV(xpd).span.alarms == DAHDI_ALARM_NONE)
send_idlebits(xpd, 1);
}
PHONEDEV(xpd).span.alarms = alarms;
elect_syncer("LAYER1");
dahdi_alarm_notify(&PHONEDEV(xpd).span);
set_clocking(xpd);
}
priv->reg_frs0 = data_low;
priv->layer1_replies++;
XPD_DBG(REGS, xpd, "subunit=%d data_low=0x%02X\n", xpd->addr.subunit,
data_low);
}
static int decode_cas_e1(xpd_t *xpd, __u8 regnum, __u8 data_low)
{
struct PRI_priv_data *priv;
uint pos = regnum - REG_RS2_E;
int rsnum = pos + 2;
int chan1 = pos;
int chan2 = pos + 16;
int val1 = (data_low >> 4) & 0xF;
int val2 = data_low & 0xF;
priv = xpd->priv;
BUG_ON(!priv->is_cas);
BUG_ON(priv->pri_protocol != PRI_PROTO_E1);
XPD_DBG(SIGNAL, xpd, "RBS: RX: data_low=0x%02X\n", data_low);
if (pos >= NUM_CAS_RS_E) {
XPD_ERR(xpd, "%s: got bad pos=%d [0-%d]\n", __func__, pos,
NUM_CAS_RS_E);
return -EINVAL;
}
if (chan1 < 0 || chan1 > PHONEDEV(xpd).channels) {
XPD_NOTICE(xpd, "%s: %s CAS: Bad chan1 number (%d)\n", __func__,
pri_protocol_name(priv->pri_protocol), chan1);
return -EINVAL;
}
if (chan2 < 0 || chan2 > PHONEDEV(xpd).channels) {
XPD_NOTICE(xpd, "%s: %s CAS: Bad chan2 number (%d)\n", __func__,
pri_protocol_name(priv->pri_protocol), chan2);
return -EINVAL;
}
XPD_DBG(SIGNAL, xpd,
"RBS: RX: RS%02d (channel %2d, channel %2d): 0x%02X -> 0x%02X\n",
rsnum, chan1 + 1, chan2 + 1, priv->cas_rs_e[pos], data_low);
if (SPAN_REGISTERED(xpd)) {
dahdi_rbsbits(XPD_CHAN(xpd, chan1), val1);
dahdi_rbsbits(XPD_CHAN(xpd, chan2), val2);
}
priv->dchan_rx_counter++;
priv->cas_rs_e[pos] = data_low;
return 0;
}
static int decode_cas_t1(xpd_t *xpd, __u8 regnum, __u8 data_low)
{
struct PRI_priv_data *priv;
uint rsnum;
uint chan_per_reg;
uint width;
int i;
priv = xpd->priv;
BUG_ON(!priv->is_cas);
BUG_ON(priv->pri_protocol != PRI_PROTO_T1);
rsnum = regnum - REG_RS1_E;
if (rsnum >= 12) {
XPD_ERR(xpd, "Bad rsnum=%d\n", rsnum);
return 0;
}
if (!priv->is_esf)
rsnum = rsnum % 6; /* 2 identical banks of 6 registers */
chan_per_reg = CHAN_PER_REGS(priv);
width = 8 / chan_per_reg;
XPD_DBG(SIGNAL, xpd, "RBS: RX(%s,%d): RS%02d data_low=0x%02X\n",
(priv->is_esf) ? "esf" : "d4", chan_per_reg, rsnum + 1,
data_low);
for (i = 0; i < chan_per_reg; i++) {
uint rxsig = (data_low >> (i * width)) & BITMASK(width);
int pos;
struct dahdi_chan *chan;
if (!priv->is_esf)
rxsig <<= 2;
pos = rsnum * chan_per_reg + chan_per_reg - i - 1;
if (pos < 0 || pos >= PHONEDEV(xpd).channels) {
XPD_ERR(xpd, "%s: Bad pos=%d\n", __func__, pos);
continue;
}
chan = XPD_CHAN(xpd, pos);
if (!chan) {
XPD_ERR(xpd, "%s: Null channel in pos=%d\n", __func__,
pos);
continue;
}
if (chan->rxsig != rxsig) {
LINE_DBG(SIGNAL, xpd, pos, "i=%d rxsig=0x%02X\n", i,
rxsig);
dahdi_rbsbits(chan, rxsig);
}
}
priv->cas_rs_e[rsnum] = data_low;
return 0;
}
static void process_cas_dchan(xpd_t *xpd, __u8 regnum, __u8 data_low)
{
struct PRI_priv_data *priv;
priv = xpd->priv;
if (!priv->is_cas) {
static int rate_limit;
if ((rate_limit++ % 10003) == 0)
XPD_NOTICE(xpd, "RBS: RX: not in CAS mode. Ignore.\n");
return;
}
if (!priv->layer1_up) {
static int rate_limit;
if ((rate_limit++ % 10003) == 0)
XPD_DBG(SIGNAL, xpd, "RBS: RX: No layer1.\n");
}
if (!SPAN_REGISTERED(xpd)) {
static int rate_limit;
if ((rate_limit++ % 10003) == 0)
XPD_DBG(SIGNAL, xpd,
"RBS: RX: Span not registered. Ignore.\n");
return;
}
if (priv->pri_protocol == PRI_PROTO_E1) {
if (regnum == REG_RS1_E)
return; /* Time slot 0: Ignored for E1 */
if (regnum < REG_RS2_E) {
/* Should not happen, but harmless. Ignore */
if (regnum == REG_RS1_E)
return;
XPD_NOTICE(xpd,
"%s: received register 0x%X in protocol %s. "
"Ignore.\n",
__func__, regnum,
pri_protocol_name(priv->pri_protocol));
return;
}
if (decode_cas_e1(xpd, regnum, data_low) < 0)
return;
} else if (priv->pri_protocol == PRI_PROTO_T1) {
if (regnum > REG_RS12_E) {
XPD_NOTICE(xpd,
"%s: received register 0x%X in protocol %s. "
"Ignore.\n",
__func__, regnum,
pri_protocol_name(priv->pri_protocol));
return;
}
if (decode_cas_t1(xpd, regnum, data_low) < 0)
return;
} else {
XPD_NOTICE(xpd,
"%s: protocol %s is not supported yet with CAS\n",
__func__, pri_protocol_name(priv->pri_protocol));
}
priv->cas_replies++;
}
static int PRI_card_register_reply(xbus_t *xbus, xpd_t *xpd, reg_cmd_t *info)
{
unsigned long flags;
struct PRI_priv_data *priv;
struct xpd_addr addr;
xpd_t *orig_xpd;
__u8 regnum;
__u8 data_low;
/* Map UNIT + PORTNUM to XPD */
orig_xpd = xpd;
addr.unit = orig_xpd->addr.unit;
addr.subunit = info->portnum;
regnum = REG_FIELD(info, regnum);
data_low = REG_FIELD(info, data_low);
xpd = xpd_byaddr(xbus, addr.unit, addr.subunit);
if (!xpd) {
static int rate_limit;
if ((rate_limit++ % 1003) < 5)
notify_bad_xpd(__func__, xbus, addr, orig_xpd->xpdname);
return -EPROTO;
}
spin_lock_irqsave(&xpd->lock, flags);
priv = xpd->priv;
BUG_ON(!priv);
if (info->is_multibyte) {
XPD_NOTICE(xpd, "Got Multibyte: %d bytes, eoframe: %d\n",
info->bytes, info->eoframe);
goto end;
}
if (regnum == REG_FRS0 && !REG_FIELD(info, do_subreg))
layer1_state(xpd, data_low);
else if (regnum == REG_FRS1 && !REG_FIELD(info, do_subreg))
priv->reg_frs1 = data_low;
if (priv->is_cas && !REG_FIELD(info, do_subreg)) {
if (regnum >= REG_RS1_E && regnum <= REG_RS16_E)
process_cas_dchan(xpd, regnum, data_low);
}
/*
* Update /proc info only if reply relate to the
* last slic read request
*/
if (REG_FIELD(&xpd->requested_reply, regnum) ==
REG_FIELD(info, regnum)
&& REG_FIELD(&xpd->requested_reply, do_subreg) ==
REG_FIELD(info, do_subreg)
&& REG_FIELD(&xpd->requested_reply, subreg) ==
REG_FIELD(info, subreg)) {
xpd->last_reply = *info;
}
end:
spin_unlock_irqrestore(&xpd->lock, flags);
return 0;
}
static int PRI_card_state(xpd_t *xpd, bool on)
{
BUG_ON(!xpd);
XPD_DBG(GENERAL, xpd, "%s\n", (on) ? "on" : "off");
return 0;
}
static const struct xops pri_xops = {
.card_new = PRI_card_new,
.card_init = PRI_card_init,
.card_remove = PRI_card_remove,
.card_tick = PRI_card_tick,
.card_register_reply = PRI_card_register_reply,
};
static const struct phoneops pri_phoneops = {
.card_dahdi_preregistration = PRI_card_dahdi_preregistration,
.card_dahdi_postregistration = PRI_card_dahdi_postregistration,
.card_pcm_recompute = PRI_card_pcm_recompute,
.card_pcm_fromspan = PRI_card_pcm_fromspan,
.card_pcm_tospan = PRI_card_pcm_tospan,
.echocancel_timeslot = PRI_echocancel_timeslot,
.echocancel_setmask = PRI_echocancel_setmask,
.card_timing_priority = PRI_timing_priority,
.card_ioctl = PRI_card_ioctl,
.card_open = PRI_card_open,
.card_close = PRI_card_close,
.card_state = PRI_card_state,
};
static xproto_table_t PROTO_TABLE(PRI) = {
.owner = THIS_MODULE,
.entries = {
/* Table Card Opcode */
},
.name = "PRI", /* protocol name */
.ports_per_subunit = 1,
.type = XPD_TYPE_PRI,
.xops = &pri_xops,
.phoneops = &pri_phoneops,
.packet_is_valid = pri_packet_is_valid,
.packet_dump = pri_packet_dump,
};
static bool pri_packet_is_valid(xpacket_t *pack)
{
const xproto_entry_t *xe = NULL;
// DBG(GENERAL, "\n");
xe = xproto_card_entry(&PROTO_TABLE(PRI), XPACKET_OP(pack));
return xe != NULL;
}
static void pri_packet_dump(const char *msg, xpacket_t *pack)
{
DBG(GENERAL, "%s\n", msg);
}
/*------------------------- REGISTER Handling --------------------------*/
/*------------------------- sysfs stuff --------------------------------*/
static DEVICE_ATTR_READER(pri_protocol_show, dev, buf)
{
xpd_t *xpd;
struct PRI_priv_data *priv;
unsigned long flags;
int len = 0;
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
if (!xpd)
return -ENODEV;
priv = xpd->priv;
BUG_ON(!priv);
spin_lock_irqsave(&xpd->lock, flags);
len += sprintf(buf, "%s\n", pri_protocol_name(priv->pri_protocol));
spin_unlock_irqrestore(&xpd->lock, flags);
return len;
}
static DEVICE_ATTR_WRITER(pri_protocol_store, dev, buf, count)
{
xpd_t *xpd;
enum pri_protocol new_protocol = PRI_PROTO_0;
int i;
int ret;
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
XPD_DBG(GENERAL, xpd, "%s\n", buf);
if (!xpd)
return -ENODEV;
i = strcspn(buf, " \r\n");
if (i != 2) {
XPD_NOTICE(xpd,
"Protocol name '%s' has %d characters (should be 2). "
"Ignored.\n",
buf, i);
return -EINVAL;
}
if (strncasecmp(buf, "E1", 2) == 0)
new_protocol = PRI_PROTO_E1;
else if (strncasecmp(buf, "T1", 2) == 0)
new_protocol = PRI_PROTO_T1;
else if (strncasecmp(buf, "J1", 2) == 0)
new_protocol = PRI_PROTO_J1;
else {
XPD_NOTICE(xpd,
"Unknown PRI protocol '%s' (should be E1|T1|J1). "
"Ignored.\n",
buf);
return -EINVAL;
}
ret = set_pri_proto(xpd, new_protocol);
return (ret < 0) ? ret : count;
}
static DEVICE_ATTR(pri_protocol, S_IRUGO | S_IWUSR, pri_protocol_show,
pri_protocol_store);
static DEVICE_ATTR_READER(pri_localloop_show, dev, buf)
{
xpd_t *xpd;
struct PRI_priv_data *priv;
unsigned long flags;
int len = 0;
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
if (!xpd)
return -ENODEV;
priv = xpd->priv;
BUG_ON(!priv);
spin_lock_irqsave(&xpd->lock, flags);
len += sprintf(buf, "%c\n", (priv->local_loopback) ? 'Y' : 'N');
spin_unlock_irqrestore(&xpd->lock, flags);
return len;
}
static DEVICE_ATTR_WRITER(pri_localloop_store, dev, buf, count)
{
xpd_t *xpd;
bool ll = 0;
int i;
int ret;
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
XPD_DBG(GENERAL, xpd, "%s\n", buf);
if (!xpd)
return -ENODEV;
if ((i = strcspn(buf, " \r\n")) != 1) {
XPD_NOTICE(xpd,
"Value '%s' has %d characters (should be 1). Ignored\n",
buf, i);
return -EINVAL;
}
if (strchr("1Yy", buf[0]) != NULL)
ll = 1;
else if (strchr("0Nn", buf[0]) != NULL)
ll = 0;
else {
XPD_NOTICE(xpd,
"Unknown value '%s' (should be [1Yy]|[0Nn]). Ignored\n",
buf);
return -EINVAL;
}
ret = set_localloop(xpd, ll);
return (ret < 0) ? ret : count;
}
static DEVICE_ATTR(pri_localloop, S_IRUGO | S_IWUSR, pri_localloop_show,
pri_localloop_store);
static DEVICE_ATTR_READER(pri_layer1_show, dev, buf)
{
xpd_t *xpd;
struct PRI_priv_data *priv;
unsigned long flags;
int len = 0;
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
if (!xpd)
return -ENODEV;
priv = xpd->priv;
BUG_ON(!priv);
spin_lock_irqsave(&xpd->lock, flags);
if (priv->poll_noreplies > 1)
len += sprintf(buf + len, "Unknown[%d]", priv->poll_noreplies);
else
len +=
sprintf(buf + len, "%-10s",
((priv->layer1_up) ? "UP" : "DOWN"));
len += sprintf(buf + len, "%d\n", priv->layer1_replies);
spin_unlock_irqrestore(&xpd->lock, flags);
return len;
}
static DEVICE_ATTR(pri_layer1, S_IRUGO, pri_layer1_show, NULL);
static DEVICE_ATTR_READER(pri_alarms_show, dev, buf)
{
xpd_t *xpd;
struct PRI_priv_data *priv;
unsigned long flags;
int len = 0;
static const struct {
__u8 bits;
const char *name;
} alarm_types[] = {
{
REG_FRS0_LOS, "RED"}, {
REG_FRS0_AIS, "BLUE"}, {
REG_FRS0_RRA, "YELLOW"},};
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
if (!xpd)
return -ENODEV;
priv = xpd->priv;
BUG_ON(!priv);
spin_lock_irqsave(&xpd->lock, flags);
if (priv->poll_noreplies > 1)
len += sprintf(buf + len, "Unknown[%d]", priv->poll_noreplies);
else {
int i;
for (i = 0; i < ARRAY_SIZE(alarm_types); i++) {
if (priv->reg_frs0 & alarm_types[i].bits)
len +=
sprintf(buf + len, "%s ",
alarm_types[i].name);
}
}
len += sprintf(buf + len, "\n");
spin_unlock_irqrestore(&xpd->lock, flags);
return len;
}
static DEVICE_ATTR(pri_alarms, S_IRUGO, pri_alarms_show, NULL);
static DEVICE_ATTR_READER(pri_cas_show, dev, buf)
{
xpd_t *xpd;
struct PRI_priv_data *priv;
unsigned long flags;
int len = 0;
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
if (!xpd)
return -ENODEV;
priv = xpd->priv;
BUG_ON(!priv);
spin_lock_irqsave(&xpd->lock, flags);
if (priv->is_cas) {
int i;
len +=
sprintf(buf + len, "CAS: replies=%d\n", priv->cas_replies);
len += sprintf(buf + len, " CAS-TS: ");
for (i = 0; i < NUM_CAS_RS_E; i++)
len += sprintf(buf + len, " %02X", priv->cas_ts_e[i]);
len += sprintf(buf + len, "\n");
len += sprintf(buf + len, " CAS-RS: ");
for (i = 0; i < NUM_CAS_RS_E; i++)
len += sprintf(buf + len, " %02X", priv->cas_rs_e[i]);
len += sprintf(buf + len, "\n");
}
spin_unlock_irqrestore(&xpd->lock, flags);
return len;
}
static DEVICE_ATTR(pri_cas, S_IRUGO, pri_cas_show, NULL);
static DEVICE_ATTR_READER(pri_dchan_show, dev, buf)
{
xpd_t *xpd;
struct PRI_priv_data *priv;
unsigned long flags;
int len = 0;
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
if (!xpd)
return -ENODEV;
priv = xpd->priv;
BUG_ON(!priv);
spin_lock_irqsave(&xpd->lock, flags);
len +=
sprintf(buf + len,
"D-Channel: TX=[%5d] (0x%02X) RX=[%5d] (0x%02X) ",
priv->dchan_tx_counter, priv->dchan_tx_sample,
priv->dchan_rx_counter, priv->dchan_rx_sample);
if (priv->dchan_alive) {
len +=
sprintf(buf + len, "(alive %d K-ticks)\n",
priv->dchan_alive_ticks / 1000);
} else {
len += sprintf(buf + len, "(dead)\n");
}
spin_unlock_irqrestore(&xpd->lock, flags);
return len;
}
static DEVICE_ATTR(pri_dchan, S_IRUGO, pri_dchan_show, NULL);
static DEVICE_ATTR_READER(pri_clocking_show, dev, buf)
{
xpd_t *xpd;
struct PRI_priv_data *priv;
unsigned long flags;
int len = 0;
BUG_ON(!dev);
xpd = dev_to_xpd(dev);
if (!xpd)
return -ENODEV;
priv = xpd->priv;
BUG_ON(!priv);
spin_lock_irqsave(&xpd->lock, flags);
len +=
sprintf(buf + len, "%s\n",
(priv->clock_source) ? "MASTER" : "SLAVE");
spin_unlock_irqrestore(&xpd->lock, flags);
return len;
}
static DEVICE_ATTR(pri_clocking, S_IRUGO, pri_clocking_show, NULL);
static int pri_xpd_probe(struct device *dev)
{
xpd_t *xpd;
int ret = 0;
xpd = dev_to_xpd(dev);
/* Is it our device? */
if (xpd->xpd_type != XPD_TYPE_PRI) {
XPD_ERR(xpd, "drop suggestion for %s (%d)\n", dev_name(dev),
xpd->xpd_type);
return -EINVAL;
}
XPD_DBG(DEVICES, xpd, "SYSFS\n");
ret = device_create_file(dev, &dev_attr_pri_protocol);
if (ret) {
XPD_ERR(xpd,
"%s: device_create_file(pri_protocol) failed: %d\n",
__func__, ret);
goto fail_pri_protocol;
}
ret = device_create_file(dev, &dev_attr_pri_localloop);
if (ret) {
XPD_ERR(xpd,
"%s: device_create_file(pri_localloop) failed: %d\n",
__func__, ret);
goto fail_pri_localloop;
}
ret = device_create_file(dev, &dev_attr_pri_layer1);
if (ret) {
XPD_ERR(xpd, "%s: device_create_file(pri_layer1) failed: %d\n",
__func__, ret);
goto fail_pri_layer1;
}
ret = device_create_file(dev, &dev_attr_pri_alarms);
if (ret) {
XPD_ERR(xpd, "%s: device_create_file(pri_alarms) failed: %d\n",
__func__, ret);
goto fail_pri_alarms;
}
ret = device_create_file(dev, &dev_attr_pri_cas);
if (ret) {
XPD_ERR(xpd, "%s: device_create_file(pri_cas) failed: %d\n",
__func__, ret);
goto fail_pri_cas;
}
ret = device_create_file(dev, &dev_attr_pri_dchan);
if (ret) {
XPD_ERR(xpd, "%s: device_create_file(pri_dchan) failed: %d\n",
__func__, ret);
goto fail_pri_dchan;
}
ret = device_create_file(dev, &dev_attr_pri_clocking);
if (ret) {
XPD_ERR(xpd,
"%s: device_create_file(pri_clocking) failed: %d\n",
__func__, ret);
goto fail_pri_clocking;
}
return 0;
fail_pri_clocking:
device_remove_file(dev, &dev_attr_pri_dchan);
fail_pri_dchan:
device_remove_file(dev, &dev_attr_pri_cas);
fail_pri_cas:
device_remove_file(dev, &dev_attr_pri_alarms);
fail_pri_alarms:
device_remove_file(dev, &dev_attr_pri_layer1);
fail_pri_layer1:
device_remove_file(dev, &dev_attr_pri_localloop);
fail_pri_localloop:
device_remove_file(dev, &dev_attr_pri_protocol);
fail_pri_protocol:
return ret;
}
static int pri_xpd_remove(struct device *dev)
{
xpd_t *xpd;
xpd = dev_to_xpd(dev);
XPD_DBG(DEVICES, xpd, "SYSFS\n");
device_remove_file(dev, &dev_attr_pri_clocking);
device_remove_file(dev, &dev_attr_pri_dchan);
device_remove_file(dev, &dev_attr_pri_cas);
device_remove_file(dev, &dev_attr_pri_alarms);
device_remove_file(dev, &dev_attr_pri_layer1);
device_remove_file(dev, &dev_attr_pri_localloop);
device_remove_file(dev, &dev_attr_pri_protocol);
return 0;
}
static struct xpd_driver pri_driver = {
.xpd_type = XPD_TYPE_PRI,
.driver = {
.name = "pri",
.owner = THIS_MODULE,
.probe = pri_xpd_probe,
.remove = pri_xpd_remove}
};
static int __init card_pri_startup(void)
{
int ret;
if ((ret = xpd_driver_register(&pri_driver.driver)) < 0)
return ret;
INFO("revision %s\n", XPP_VERSION);
#ifdef DAHDI_AUDIO_NOTIFY
INFO("FEATURE: WITH DAHDI_AUDIO_NOTIFY\n");
#else
INFO("FEATURE: WITHOUT DAHDI_AUDIO_NOTIFY\n");
#endif
xproto_register(&PROTO_TABLE(PRI));
return 0;
}
static void __exit card_pri_cleanup(void)
{
DBG(GENERAL, "\n");
xproto_unregister(&PROTO_TABLE(PRI));
xpd_driver_unregister(&pri_driver.driver);
}
MODULE_DESCRIPTION("XPP PRI Card Driver");
MODULE_AUTHOR("Oron Peled <oron@actcom.co.il>");
MODULE_LICENSE("GPL");
MODULE_VERSION(XPP_VERSION);
MODULE_ALIAS_XPD(XPD_TYPE_PRI);
module_init(card_pri_startup);
module_exit(card_pri_cleanup);
Reference in New Issue View Git Blame Copy Permalink