dahdi-linux/drivers/dahdi/Kbuild
Shaun Ruffell bf3fe05dfb wct4xxp: Moving the transmit short detection behind debug module param.
This needs some more testing before it's on by default.  If the card is
otherwise functioning, these messages may be confusing to the user.  If
the card is not functioning, the driver can be reloaded with debug to
check for this condition.

Signed-off-by: Shaun Ruffell <sruffell@digium.com>

git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9205 a0bf4364-ded3-4de4-8d8a-66a801d63aff
2010-08-27 21:59:27 +00:00

150 lines
5.2 KiB
Makefile

obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI) += dahdi.o
#obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_DUMMY) += dahdi_dummy.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_DYNAMIC) += dahdi_dynamic.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_DYNAMIC_LOC) += dahdi_dynamic_loc.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_DYNAMIC_ETH) += dahdi_dynamic_eth.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_DYNAMIC_ETHMF) += dahdi_dynamic_ethmf.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_TRANSCODE) += dahdi_transcode.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCT4XXP) += wct4xxp/
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTC4XXP) += wctc4xxp/
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTDM24XXP) += wctdm24xxp/
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTE12XP) += wcte12xp/
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTDM) += wctdm.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_VOICEBUS) += voicebus/
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCB4XXP) += wcb4xxp/
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCT1XXP) += wct1xxp.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCTE11XP) += wcte11xp.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_WCFXO) += wcfxo.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_TOR2) += tor2.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_PCIRADIO) += pciradio.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_XPP) += xpp/
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_ECHOCAN_JPAH) += dahdi_echocan_jpah.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_ECHOCAN_STEVE) += dahdi_echocan_sec.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_ECHOCAN_STEVE2) += dahdi_echocan_sec2.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_ECHOCAN_KB1) += dahdi_echocan_kb1.o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_ECHOCAN_MG2) += dahdi_echocan_mg2.o
obj-m += $(DAHDI_MODULES_EXTRA)
# Only enable this if you think you know what you're doing. This is not
# supported yet:
#obj-m += dahdi_echocan_oslec.o
#
# A quick and dirty way to build OSLEC, if you happened to place it
# yourself in the dahdi source tree. This is experimental. See README
# regarding OSLEC.
#obj-m += ../staging/echo/
CFLAGS_MODULE += -I$(DAHDI_INCLUDE) -I$(src)
ifndef HOTPLUG_FIRMWARE
ifneq (,$(filter y m,$(CONFIG_FW_LOADER)))
HOTPLUG_FIRMWARE := yes
else
HOTPLUG_FIRMWARE := no
endif
export HOTPLUG_FIRMWARE
endif
# fix typo present in CentOS and RHEL 2.6.9 kernels
BAD_KERNELS_VERS := 22 34 34.0.1 34.0.2
BAD_KERNELS := $(foreach ver,$(BAD_KERNELS_VERS),2.6.9-$(ver).EL 2.6.9-$(ver).ELsmp)
ifneq (,$(filter $(KVERS),$(BAD_KERNELS)))
EXTRA_CFLAGS+=-Drw_lock_t=rwlock_t
endif
# A number of Fedora 10 (9 also?) kernels backported hrtimer to 2.6.27
# as part of an ALSA backport. TODO: Any better way to detect that?
ifeq (1,$(shell fgrep -q ' hrtimer_set_expires' include/linux/hrtimer.h 2>/dev/null && echo 1))
EXTRA_CFLAGS+=-DHAVE_HRTIMER_ACCESSORS=1
endif
ifeq (1,$(shell fgrep -q 'wait_for_completion_timeout' include/linux/completion.h 2>/dev/null && echo 1))
CFLAGS_MODULE+=-DHAVE_WAIT_FOR_COMPLETION_TIMEOUT=1
endif
# In 2.6.18 skb_linearize changed; however, some distros backported the change
ifneq (,$(wildcard $(srctree)/include/linux/skbuff.h))
ifeq ($(shell grep "skb_linearize.*(.*, .* gfp)" $(srctree)/include/linux/skbuff.h),)
CFLAGS_dahdi_dynamic_eth.o := -DNEW_SKB_LINEARIZE
CFLAGS_dahdi_dynamic_ethmf.o := -DNEW_SKB_LINEARIZE
endif
endif
dahdi-objs := dahdi-base.o
###############################################################################
# Find appropriate ARCH value for VPMADT032 and HPEC binary modules
###############################################################################
ifeq ($(ARCH),i386)
DAHDI_ARCH=x86_32
else
ifeq ($(ARCH),x86_64)
DAHDI_ARCH=x86_64
else
ifeq ($(ARCH),x86)
ifeq ($(CONFIG_X86_32),y)
DAHDI_ARCH=x86_32
else
DAHDI_ARCH=x86_64
endif
else
$(warning CPU Architecture '$(ARCH)' does not support VPMADT032 or HPEC. Skipping.)
endif
endif
endif
###############################################################################
# VPMADT032 Loader
###############################################################################
dahdi_vpmadt032_loader-objs := vpmadt032_loader/dahdi_vpmadt032_loader.o
ifneq ($(DAHDI_ARCH),)
ifneq ($(wildcard $(src)/vpmadt032_loader/vpmadt032_$(DAHDI_ARCH).o_shipped),)
VPMADT032_LOADER_PRESENT=yes
dahdi_vpmadt032_loader-objs += vpmadt032_loader/vpmadt032_$(DAHDI_ARCH).o
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_VPMADT032_LOADER) += dahdi_vpmadt032_loader.o
endif
endif
###############################################################################
# HPEC Support
###############################################################################
dahdi_echocan_hpec-objs := hpec/dahdi_echocan_hpec.o
CFLAGS_dahdi_echocan_hpec.o := -I$(src)/hpec
ifneq ($(DAHDI_ARCH),)
ifneq ($(wildcard $(src)/hpec/hpec_$(DAHDI_ARCH).o_shipped),)
HPEC_PRESENT=yes
dahdi_echocan_hpec-objs += hpec/hpec_$(DAHDI_ARCH).o
endif
endif
ifeq ($(HPEC_PRESENT),yes)
obj-$(DAHDI_BUILD_ALL)$(CONFIG_DAHDI_ECHOCAN_HPEC) += dahdi_echocan_hpec.o
endif
$(obj)/pciradio.o: $(obj)/radfw.h
$(obj)/tor2.o: $(obj)/tor2fw.h
hostprogs-y := $(obj)/makefw
$(obj)/tor2fw.h: $(src)/tormenta2.rbt $(obj)/makefw
$(obj)/makefw $< tor2fw > $@
$(obj)/radfw.h: $(src)/pciradio.rbt $(obj)/makefw
$(obj)/makefw $< radfw > $@
$(obj)/makefw: $(src)/makefw.c
$(HOSTCC) -o $@ $^
clean-files := radfw.h tor2fw.h