892e49c356
* We need to split the BRI D-Channel (HDLC) frames to smaller packets, limitation of the FPGA. * This changes batches BRI D-channel packets of the same HDLC frame to a single XPP frame. * Avoids an accidental fragmantion in case we were delayed for a few ms-s. * Also improves efficiency. Signed-off-by: Oron Peled <oron.peled@xorcom.com> Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10390 a0bf4364-ded3-4de4-8d8a-66a801d63aff
1720 lines
45 KiB
C
1720 lines
45 KiB
C
/*
|
|
* Written by Oron Peled <oron@actcom.co.il>
|
|
* Copyright (C) 2004-2006, Xorcom
|
|
*
|
|
* Parts derived from Cologne demo driver for the chip.
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/delay.h>
|
|
#include "xpd.h"
|
|
#include "xproto.h"
|
|
#include "xpp_dahdi.h"
|
|
#include "card_bri.h"
|
|
#include "dahdi_debug.h"
|
|
#include "xbus-core.h"
|
|
|
|
static const char rcsid[] = "$Id$";
|
|
|
|
#ifndef DAHDI_SIG_HARDHDLC
|
|
#error Cannot build BRI without HARDHDLC supprt
|
|
#endif
|
|
|
|
static DEF_PARM(int, debug, 0, 0644, "Print DBG statements"); /* must be before dahdi_debug.h */
|
|
static DEF_PARM(uint, poll_interval, 500, 0644, "Poll channel state interval in milliseconds (0 - disable)");
|
|
static DEF_PARM_BOOL(nt_keepalive, 1, 0644, "Force BRI_NT to keep trying connection");
|
|
|
|
enum xhfc_states {
|
|
ST_RESET = 0, /* G/F0 */
|
|
/* TE */
|
|
ST_TE_SENSING = 2, /* F2 */
|
|
ST_TE_DEACTIVATED = 3, /* F3 */
|
|
ST_TE_SIGWAIT = 4, /* F4 */
|
|
ST_TE_IDENT = 5, /* F5 */
|
|
ST_TE_SYNCED = 6, /* F6 */
|
|
ST_TE_ACTIVATED = 7, /* F7 */
|
|
ST_TE_LOST_FRAMING = 8, /* F8 */
|
|
/* NT */
|
|
ST_NT_DEACTIVATED = 1, /* G1 */
|
|
ST_NT_ACTIVATING = 2, /* G2 */
|
|
ST_NT_ACTIVATED = 3, /* G3 */
|
|
ST_NT_DEACTIVTING = 4, /* G4 */
|
|
};
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
static const char *xhfc_state_name(bool is_nt, enum xhfc_states state)
|
|
{
|
|
const char *p;
|
|
|
|
#define _E(x) [ST_ ## x] = #x
|
|
static const char *te_names[] = {
|
|
_E(RESET),
|
|
_E(TE_SENSING),
|
|
_E(TE_DEACTIVATED),
|
|
_E(TE_SIGWAIT),
|
|
_E(TE_IDENT),
|
|
_E(TE_SYNCED),
|
|
_E(TE_ACTIVATED),
|
|
_E(TE_LOST_FRAMING),
|
|
};
|
|
static const char *nt_names[] = {
|
|
_E(RESET),
|
|
_E(NT_DEACTIVATED),
|
|
_E(NT_ACTIVATING),
|
|
_E(NT_ACTIVATED),
|
|
_E(NT_DEACTIVTING),
|
|
};
|
|
#undef _E
|
|
if(is_nt) {
|
|
if (state > ST_NT_DEACTIVTING)
|
|
p = "NT ???";
|
|
else
|
|
p = nt_names[state];
|
|
} else {
|
|
if (state > ST_TE_LOST_FRAMING)
|
|
p = "TE ???";
|
|
else
|
|
p = te_names[state];
|
|
}
|
|
return p;
|
|
}
|
|
#endif
|
|
|
|
/* xhfc Layer1 physical commands */
|
|
#define HFC_L1_ACTIVATE_TE 0x01
|
|
#define HFC_L1_FORCE_DEACTIVATE_TE 0x02
|
|
#define HFC_L1_ACTIVATE_NT 0x03
|
|
#define HFC_L1_DEACTIVATE_NT 0x04
|
|
|
|
#define HFC_L1_ACTIVATING 1
|
|
#define HFC_L1_ACTIVATED 2
|
|
#define HFC_TIMER_T1 2500
|
|
#define HFC_TIMER_T3 8000 /* 8s activation timer T3 */
|
|
#define HFC_TIMER_OFF -1 /* timer disabled */
|
|
|
|
#define A_SU_WR_STA 0x30 /* ST/Up state machine register */
|
|
#define V_SU_LD_STA 0x10
|
|
#define V_SU_ACT 0x60 /* start activation/deactivation */
|
|
#define STA_DEACTIVATE 0x40 /* start deactivation in A_SU_WR_STA */
|
|
#define STA_ACTIVATE 0x60 /* start activation in A_SU_WR_STA */
|
|
#define V_SU_SET_G2_G3 0x80
|
|
|
|
#define A_SU_RD_STA 0x30
|
|
typedef union {
|
|
struct {
|
|
byte v_su_sta:4;
|
|
byte v_su_fr_sync:1;
|
|
byte v_su_t2_exp:1;
|
|
byte v_su_info0:1;
|
|
byte v_g2_g3:1;
|
|
} bits;
|
|
byte reg;
|
|
} su_rd_sta_t;
|
|
|
|
#define REG30_LOST 3 /* in polls */
|
|
#define DCHAN_LOST 15000 /* in ticks */
|
|
|
|
#define BRI_DCHAN_SIGCAP DAHDI_SIG_HARDHDLC
|
|
#define BRI_BCHAN_SIGCAP (DAHDI_SIG_CLEAR | DAHDI_SIG_DACS)
|
|
|
|
#define IS_NT(xpd) (PHONEDEV(xpd).direction == TO_PHONE)
|
|
#define BRI_PORT(xpd) ((xpd)->addr.subunit)
|
|
|
|
/* shift in PCM highway */
|
|
#define SUBUNIT_PCM_SHIFT 4
|
|
#define PCM_SHIFT(mask, sunit) ((mask) << (SUBUNIT_PCM_SHIFT * (sunit)))
|
|
|
|
/*---------------- BRI Protocol Commands ----------------------------------*/
|
|
|
|
static int write_state_register(xpd_t *xpd, byte value);
|
|
static bool bri_packet_is_valid(xpacket_t *pack);
|
|
static void bri_packet_dump(const char *msg, xpacket_t *pack);
|
|
#ifdef CONFIG_PROC_FS
|
|
static int proc_bri_info_read(char *page, char **start, off_t off, int count, int *eof, void *data);
|
|
#endif
|
|
static int bri_spanconfig(struct file *file, struct dahdi_span *span,
|
|
struct dahdi_lineconfig *lc);
|
|
static int bri_chanconfig(struct file *file, struct dahdi_chan *chan,
|
|
int sigtype);
|
|
static int bri_startup(struct file *file, struct dahdi_span *span);
|
|
static int bri_shutdown(struct dahdi_span *span);
|
|
|
|
#define PROC_REGISTER_FNAME "slics"
|
|
#define PROC_BRI_INFO_FNAME "bri_info"
|
|
|
|
enum led_state {
|
|
BRI_LED_OFF = 0x0,
|
|
BRI_LED_ON = 0x1,
|
|
/*
|
|
* We blink by software from driver, so that
|
|
* if the driver malfunction that blink would stop.
|
|
*/
|
|
// BRI_LED_BLINK_SLOW = 0x2, /* 1/2 a second blink cycle */
|
|
// BRI_LED_BLINK_FAST = 0x3 /* 1/4 a second blink cycle */
|
|
};
|
|
|
|
enum bri_led_names {
|
|
GREEN_LED = 0,
|
|
RED_LED = 1
|
|
};
|
|
|
|
#define NUM_LEDS 2
|
|
#define LED_TICKS 100
|
|
|
|
|
|
struct bri_leds {
|
|
byte state:2;
|
|
byte led_sel:1; /* 0 - GREEN, 1 - RED */
|
|
byte reserved:5;
|
|
};
|
|
|
|
#ifndef MAX_DFRAME_LEN_L1
|
|
#define MAX_DFRAME_LEN_L1 300
|
|
#endif
|
|
|
|
#define DCHAN_BUFSIZE MAX_DFRAME_LEN_L1
|
|
|
|
struct BRI_priv_data {
|
|
struct proc_dir_entry *bri_info;
|
|
su_rd_sta_t state_register;
|
|
bool initialized;
|
|
int t1; /* timer 1 for NT deactivation */
|
|
int t3; /* timer 3 for TE activation */
|
|
ulong l1_flags;
|
|
bool reg30_good;
|
|
uint reg30_ticks;
|
|
bool layer1_up;
|
|
|
|
/*
|
|
* D-Chan: buffers + extra state info.
|
|
*/
|
|
atomic_t hdlc_pending;
|
|
bool txframe_begin;
|
|
|
|
uint tick_counter;
|
|
uint poll_counter;
|
|
uint dchan_tx_counter;
|
|
uint dchan_rx_counter;
|
|
uint dchan_rx_drops;
|
|
bool dchan_alive;
|
|
uint dchan_alive_ticks;
|
|
uint dchan_notx_ticks;
|
|
uint dchan_norx_ticks;
|
|
enum led_state ledstate[NUM_LEDS];
|
|
};
|
|
|
|
static xproto_table_t PROTO_TABLE(BRI);
|
|
|
|
|
|
DEF_RPACKET_DATA(BRI, SET_LED, /* Set one of the LED's */
|
|
struct bri_leds bri_leds;
|
|
);
|
|
|
|
static /* 0x33 */ DECLARE_CMD(BRI, SET_LED, enum bri_led_names which_led, enum led_state to_led_state);
|
|
|
|
#define DO_LED(xpd, which, tostate) \
|
|
CALL_PROTO(BRI, SET_LED, (xpd)->xbus, (xpd), (which), (tostate))
|
|
|
|
#define DEBUG_BUF_SIZE (100)
|
|
static void dump_hex_buf(xpd_t *xpd, char *msg, byte *buf, size_t len)
|
|
{
|
|
char debug_buf[DEBUG_BUF_SIZE + 1];
|
|
int i;
|
|
int n = 0;
|
|
|
|
debug_buf[0] = '\0';
|
|
for(i = 0; i < len && n < DEBUG_BUF_SIZE; i++)
|
|
n += snprintf(&debug_buf[n], DEBUG_BUF_SIZE - n, "%02X ", buf[i]);
|
|
XPD_NOTICE(xpd, "%s[0..%zd]: %s%s\n", msg, len-1, debug_buf,
|
|
(n >= DEBUG_BUF_SIZE)?"...":"");
|
|
}
|
|
|
|
static void dump_dchan_packet(xpd_t *xpd, bool transmit, byte *buf, int len)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
char msgbuf[MAX_PROC_WRITE];
|
|
char ftype = '?';
|
|
char *direction;
|
|
int frame_begin;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(transmit) {
|
|
direction = "TX";
|
|
frame_begin = priv->txframe_begin;
|
|
} else {
|
|
direction = "RX";
|
|
frame_begin = 1;
|
|
}
|
|
if(frame_begin) { /* Packet start */
|
|
if(!IS_SET(buf[0], 7))
|
|
ftype = 'I'; /* Information */
|
|
else if(IS_SET(buf[0], 7) && !IS_SET(buf[0], 6))
|
|
ftype = 'S'; /* Supervisory */
|
|
else if(IS_SET(buf[0], 7) && IS_SET(buf[0], 6))
|
|
ftype = 'U'; /* Unnumbered */
|
|
else
|
|
XPD_NOTICE(xpd, "Unknown frame type 0x%X\n", buf[0]);
|
|
|
|
snprintf(msgbuf, MAX_PROC_WRITE, "D-Chan %s = (%c) ", direction, ftype);
|
|
} else {
|
|
snprintf(msgbuf, MAX_PROC_WRITE, "D-Chan %s = ", direction);
|
|
}
|
|
dump_hex_buf(xpd, msgbuf, buf, len);
|
|
}
|
|
|
|
static void set_bri_timer(xpd_t *xpd, const char *name, int *bri_timer, int value)
|
|
{
|
|
if(value == HFC_TIMER_OFF)
|
|
XPD_DBG(SIGNAL, xpd, "Timer %s DISABLE\n", name);
|
|
else
|
|
XPD_DBG(SIGNAL, xpd, "Timer %s: set to %d\n", name, value);
|
|
*bri_timer = value;
|
|
}
|
|
|
|
static void dchan_state(xpd_t *xpd, bool up)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(priv->dchan_alive == up)
|
|
return;
|
|
if(up) {
|
|
XPD_DBG(SIGNAL, xpd, "STATE CHANGE: D-Channel RUNNING\n");
|
|
priv->dchan_alive = 1;
|
|
} else {
|
|
XPD_DBG(SIGNAL, xpd, "STATE CHANGE: D-Channel STOPPED\n");
|
|
priv->dchan_rx_counter = priv->dchan_tx_counter = priv->dchan_rx_drops = 0;
|
|
priv->dchan_alive = 0;
|
|
priv->dchan_alive_ticks = 0;
|
|
}
|
|
}
|
|
|
|
static void layer1_state(xpd_t *xpd, bool up)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(priv->layer1_up == up)
|
|
return;
|
|
priv->layer1_up = up;
|
|
XPD_DBG(SIGNAL, xpd, "STATE CHANGE: Layer1 %s\n", (up)?"UP":"DOWN");
|
|
if(!up)
|
|
dchan_state(xpd, 0);
|
|
}
|
|
|
|
static void te_activation(xpd_t *xpd, bool on)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
byte curr_state;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
curr_state = priv->state_register.bits.v_su_sta;
|
|
XPD_DBG(SIGNAL, xpd, "%s\n", (on)?"ON":"OFF");
|
|
if(on) {
|
|
if(curr_state == ST_TE_DEACTIVATED) {
|
|
XPD_DBG(SIGNAL, xpd, "HFC_L1_ACTIVATE_TE\n");
|
|
set_bit(HFC_L1_ACTIVATING, &priv->l1_flags);
|
|
write_state_register(xpd, STA_ACTIVATE);
|
|
set_bri_timer(xpd, "T3", &priv->t3, HFC_TIMER_T3);
|
|
} else {
|
|
XPD_DBG(SIGNAL, xpd,
|
|
"HFC_L1_ACTIVATE_TE (state %d, ignored)\n",
|
|
curr_state);
|
|
}
|
|
} else { /* happen only because of T3 expiry */
|
|
switch (curr_state) {
|
|
case ST_TE_DEACTIVATED: /* F3 */
|
|
case ST_TE_SYNCED: /* F6 */
|
|
case ST_TE_ACTIVATED: /* F7 */
|
|
XPD_DBG(SIGNAL, xpd,
|
|
"HFC_L1_FORCE_DEACTIVATE_TE (state %d, ignored)\n",
|
|
curr_state);
|
|
break;
|
|
case ST_TE_SIGWAIT: /* F4 */
|
|
case ST_TE_IDENT: /* F5 */
|
|
case ST_TE_LOST_FRAMING: /* F8 */
|
|
XPD_DBG(SIGNAL, xpd, "HFC_L1_FORCE_DEACTIVATE_TE\n");
|
|
write_state_register(xpd, STA_DEACTIVATE);
|
|
break;
|
|
default:
|
|
XPD_NOTICE(xpd, "Bad TE state: %d\n", curr_state);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void nt_activation(xpd_t *xpd, bool on)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
byte curr_state;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
curr_state = priv->state_register.bits.v_su_sta;
|
|
XPD_DBG(SIGNAL, xpd, "%s\n", (on)?"ON":"OFF");
|
|
if(on) {
|
|
switch(curr_state) {
|
|
case ST_RESET: /* F/G 0 */
|
|
case ST_NT_DEACTIVATED: /* G1 */
|
|
case ST_NT_DEACTIVTING: /* G4 */
|
|
XPD_DBG(SIGNAL, xpd, "HFC_L1_ACTIVATE_NT\n");
|
|
set_bri_timer(xpd, "T1", &priv->t1, HFC_TIMER_T1);
|
|
set_bit(HFC_L1_ACTIVATING, &priv->l1_flags);
|
|
write_state_register(xpd, STA_ACTIVATE);
|
|
break;
|
|
case ST_NT_ACTIVATING: /* G2 */
|
|
case ST_NT_ACTIVATED: /* G3 */
|
|
XPD_DBG(SIGNAL, xpd,
|
|
"HFC_L1_ACTIVATE_NT (in state %d, ignored)\n",
|
|
curr_state);
|
|
break;
|
|
}
|
|
} else {
|
|
switch(curr_state) {
|
|
case ST_RESET: /* F/G 0 */
|
|
case ST_NT_DEACTIVATED: /* G1 */
|
|
case ST_NT_DEACTIVTING: /* G4 */
|
|
XPD_DBG(SIGNAL, xpd,
|
|
"HFC_L1_DEACTIVATE_NT (in state %d, ignored)\n",
|
|
curr_state);
|
|
break;
|
|
case ST_NT_ACTIVATING: /* G2 */
|
|
case ST_NT_ACTIVATED: /* G3 */
|
|
XPD_DBG(SIGNAL, xpd, "HFC_L1_DEACTIVATE_NT\n");
|
|
write_state_register(xpd, STA_DEACTIVATE);
|
|
break;
|
|
default:
|
|
XPD_NOTICE(xpd, "Bad NT state: %d\n", curr_state);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* D-Chan receive
|
|
*/
|
|
static int bri_check_stat(xpd_t *xpd, struct dahdi_chan *dchan, byte *buf, int len)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
byte status;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(len <= 0) {
|
|
XPD_NOTICE(xpd, "D-Chan RX DROP: short frame (len=%d)\n", len);
|
|
dahdi_hdlc_abort(dchan, DAHDI_EVENT_ABORT);
|
|
return -EPROTO;
|
|
}
|
|
status = buf[len-1];
|
|
if(status) {
|
|
int event = DAHDI_EVENT_ABORT;
|
|
|
|
if(status == 0xFF) {
|
|
XPD_NOTICE(xpd, "D-Chan RX DROP: ABORT: %d\n", status);
|
|
} else {
|
|
XPD_NOTICE(xpd, "D-Chan RX DROP: BADFCS: %d\n", status);
|
|
event = DAHDI_EVENT_BADFCS;
|
|
}
|
|
dump_hex_buf(xpd, "D-Chan RX: current packet", buf, len);
|
|
dahdi_hdlc_abort(dchan, event);
|
|
return -EPROTO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int rx_dchan(xpd_t *xpd, reg_cmd_t *regcmd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
byte *src;
|
|
struct dahdi_chan *dchan;
|
|
uint len;
|
|
bool eoframe;
|
|
int ret = 0;
|
|
|
|
src = REG_XDATA(regcmd);
|
|
len = regcmd->bytes;
|
|
eoframe = regcmd->eoframe;
|
|
if(len <= 0)
|
|
return 0;
|
|
if(!SPAN_REGISTERED(xpd)) /* Nowhere to copy data */
|
|
return 0;
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
dchan = XPD_CHAN(xpd, 2);
|
|
if(!IS_OFFHOOK(xpd, 2)) { /* D-chan is used? */
|
|
static int rate_limit;
|
|
|
|
if((rate_limit++ % 1000) == 0)
|
|
XPD_DBG(SIGNAL, xpd, "D-Chan unused\n");
|
|
goto out;
|
|
}
|
|
XPD_DBG(GENERAL, xpd, "D-Chan RX: eoframe=%d len=%d\n", eoframe, len);
|
|
dahdi_hdlc_putbuf(dchan, src, (eoframe) ? len - 1 : len);
|
|
if(!eoframe)
|
|
goto out;
|
|
if((ret = bri_check_stat(xpd, dchan, src, len)) < 0)
|
|
goto out;
|
|
/*
|
|
* Tell Dahdi that we received len-1 bytes. They include the data and a 2-byte checksum.
|
|
* The last byte (that we don't pass on) is 0 if the checksum is correct. If it were wrong,
|
|
* we would drop the packet in the "if(src[len-1])" above.
|
|
*/
|
|
dahdi_hdlc_finish(dchan);
|
|
priv->dchan_rx_counter++;
|
|
priv->dchan_norx_ticks = 0;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* D-Chan transmit
|
|
*/
|
|
/* DAHDI calls this when it has data it wants to send to the HDLC controller */
|
|
static void bri_hdlc_hard_xmit(struct dahdi_chan *chan)
|
|
{
|
|
xpd_t *xpd = chan->pvt;
|
|
struct dahdi_chan *dchan;
|
|
struct BRI_priv_data *priv;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
dchan = XPD_CHAN(xpd, 2);
|
|
if (dchan == chan) {
|
|
atomic_inc(&priv->hdlc_pending);
|
|
}
|
|
}
|
|
|
|
static int send_dchan_frame(xpd_t *xpd, xframe_t *xframe, bool is_eof)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
int ret;
|
|
|
|
XPD_DBG(COMMANDS, xpd, "eoframe=%d\n", is_eof);
|
|
priv = xpd->priv;
|
|
if (!test_bit(HFC_L1_ACTIVATED, &priv->l1_flags)
|
|
&& !test_bit(HFC_L1_ACTIVATING, &priv->l1_flags)) {
|
|
XPD_DBG(SIGNAL, xpd, "Want to transmit: Kick D-Channel transmiter\n");
|
|
if (!IS_NT(xpd))
|
|
te_activation(xpd, 1);
|
|
else
|
|
nt_activation(xpd, 1);
|
|
}
|
|
dump_xframe("send_dchan_frame", xpd->xbus, xframe, debug);
|
|
ret = send_cmd_frame(xpd->xbus, xframe);
|
|
if (ret < 0)
|
|
XPD_ERR(xpd, "%s: failed sending xframe\n", __func__);
|
|
if (is_eof) {
|
|
atomic_dec(&priv->hdlc_pending);
|
|
priv->dchan_tx_counter++;
|
|
priv->txframe_begin = 1;
|
|
} else
|
|
priv->txframe_begin = 0;
|
|
priv->dchan_notx_ticks = 0;
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Fill a single multibyte REGISTER_REQUEST
|
|
*/
|
|
static void fill_multibyte(xpd_t *xpd, xpacket_t *pack, bool eoframe,
|
|
char *buf, int len)
|
|
{
|
|
reg_cmd_t *reg_cmd;
|
|
char *p;
|
|
|
|
XPACKET_INIT(pack, GLOBAL, REGISTER_REQUEST, xpd->xbus_idx, 0, 0);
|
|
XPACKET_LEN(pack) = RPACKET_SIZE(GLOBAL, REGISTER_REQUEST);
|
|
reg_cmd = &RPACKET_FIELD(pack, GLOBAL, REGISTER_REQUEST, reg_cmd);
|
|
reg_cmd->bytes = len;
|
|
reg_cmd->is_multibyte = 1;
|
|
reg_cmd->portnum = xpd->addr.subunit;
|
|
reg_cmd->eoframe = eoframe;
|
|
p = REG_XDATA(reg_cmd);
|
|
memcpy(p, buf, len);
|
|
if (debug)
|
|
dump_dchan_packet(xpd, 1, p, len);
|
|
}
|
|
|
|
/*
|
|
* Transmit available D-Channel frames
|
|
*
|
|
* - FPGA firmware expect to get this as a sequence of REGISTER_REQUEST
|
|
* multibyte commands.
|
|
* - The payload of each command is limited to MULTIBYTE_MAX_LEN bytes.
|
|
* - We batch several REGISTER_REQUEST packets into a single xframe.
|
|
* - The xframe is terminated when we get a bri "end of frame"
|
|
* or when the xframe is full (should not happen).
|
|
*/
|
|
static int tx_dchan(xpd_t *xpd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
xframe_t *xframe;
|
|
xpacket_t *pack;
|
|
int packet_count;
|
|
int eoframe;
|
|
int ret;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if (atomic_read(&priv->hdlc_pending) == 0)
|
|
return 0;
|
|
if (!SPAN_REGISTERED(xpd) ||
|
|
!(PHONEDEV(xpd).span.flags & DAHDI_FLAG_RUNNING))
|
|
return 0;
|
|
/* Allocate frame */
|
|
xframe = ALLOC_SEND_XFRAME(xpd->xbus);
|
|
if (!xframe) {
|
|
XPD_NOTICE(xpd, "%s: failed to allocate new xframe\n",
|
|
__func__);
|
|
return -ENOMEM;
|
|
}
|
|
for (packet_count = 0, eoframe = 0; !eoframe; packet_count++) {
|
|
int packet_len = RPACKET_SIZE(GLOBAL, REGISTER_REQUEST);
|
|
char buf[MULTIBYTE_MAX_LEN];
|
|
int len = MULTIBYTE_MAX_LEN;
|
|
|
|
/* Reserve packet */
|
|
pack = xframe_next_packet(xframe, packet_len);
|
|
if (!pack) {
|
|
BUG_ON(!packet_count);
|
|
/*
|
|
* A split. Send what we currently have.
|
|
*/
|
|
XPD_NOTICE(xpd,
|
|
"%s: xframe is full (%d packets)\n",
|
|
__func__, packet_count);
|
|
break;
|
|
}
|
|
/* Get data from DAHDI */
|
|
eoframe = dahdi_hdlc_getbuf(XPD_CHAN(xpd, 2), buf, &len);
|
|
if (len <= 0) {
|
|
/*
|
|
* Already checked priv->hdlc_pending,
|
|
* should never get here.
|
|
*/
|
|
if (printk_ratelimit())
|
|
XPD_ERR(xpd,
|
|
"%s: hdlc_pending, but nothing to transmit?\n",
|
|
__func__);
|
|
FREE_SEND_XFRAME(xpd->xbus, xframe);
|
|
return -EINVAL;
|
|
}
|
|
BUG_ON(len > MULTIBYTE_MAX_LEN);
|
|
fill_multibyte(xpd, pack, eoframe != 0, buf, len);
|
|
}
|
|
return send_dchan_frame(xpd, xframe, eoframe != 0);
|
|
return ret;
|
|
}
|
|
|
|
/*---------------- BRI: Methods -------------------------------------------*/
|
|
|
|
static void bri_proc_remove(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
XPD_DBG(PROC, xpd, "\n");
|
|
#ifdef CONFIG_PROC_FS
|
|
if(priv->bri_info) {
|
|
XPD_DBG(PROC, xpd, "Removing '%s'\n", PROC_BRI_INFO_FNAME);
|
|
remove_proc_entry(PROC_BRI_INFO_FNAME, xpd->proc_xpd_dir);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static int bri_proc_create(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
XPD_DBG(PROC, xpd, "\n");
|
|
#ifdef CONFIG_PROC_FS
|
|
XPD_DBG(PROC, xpd, "Creating '%s'\n", PROC_BRI_INFO_FNAME);
|
|
priv->bri_info = create_proc_read_entry(PROC_BRI_INFO_FNAME, 0444, xpd->proc_xpd_dir, proc_bri_info_read, xpd);
|
|
if(!priv->bri_info) {
|
|
XPD_ERR(xpd, "Failed to create proc file '%s'\n", PROC_BRI_INFO_FNAME);
|
|
bri_proc_remove(xbus, xpd);
|
|
return -EINVAL;
|
|
}
|
|
SET_PROC_DIRENTRY_OWNER(priv->bri_info);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static xpd_t *BRI_card_new(xbus_t *xbus, int unit, int subunit, const xproto_table_t *proto_table,
|
|
byte subtype, int subunits, int subunit_ports, bool to_phone)
|
|
{
|
|
xpd_t *xpd = NULL;
|
|
int channels = min(3, CHANNELS_PERXPD);
|
|
|
|
if(subunit_ports != 1) {
|
|
XBUS_ERR(xbus, "Bad subunit_ports=%d\n", subunit_ports);
|
|
return NULL;
|
|
}
|
|
XBUS_DBG(GENERAL, xbus, "\n");
|
|
xpd = xpd_alloc(xbus, unit, subunit, subtype, subunits, sizeof(struct BRI_priv_data), proto_table, channels);
|
|
if(!xpd)
|
|
return NULL;
|
|
PHONEDEV(xpd).direction = (to_phone) ? TO_PHONE : TO_PSTN;
|
|
xpd->type_name = (to_phone) ? "BRI_NT" : "BRI_TE";
|
|
if(bri_proc_create(xbus, xpd) < 0)
|
|
goto err;
|
|
return xpd;
|
|
err:
|
|
xpd_free(xpd);
|
|
return NULL;
|
|
}
|
|
|
|
static int BRI_card_init(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
XPD_DBG(GENERAL, xpd, "\n");
|
|
priv = xpd->priv;
|
|
DO_LED(xpd, GREEN_LED, BRI_LED_OFF);
|
|
DO_LED(xpd, RED_LED, BRI_LED_OFF);
|
|
set_bri_timer(xpd, "T1", &priv->t1, HFC_TIMER_OFF);
|
|
write_state_register(xpd, 0); /* Enable L1 state machine */
|
|
priv->initialized = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int BRI_card_remove(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
BUG_ON(!xpd);
|
|
XPD_DBG(GENERAL, xpd, "\n");
|
|
bri_proc_remove(xbus, xpd);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dahdi_span_ops BRI_span_ops = {
|
|
.owner = THIS_MODULE,
|
|
.spanconfig = bri_spanconfig,
|
|
.chanconfig = bri_chanconfig,
|
|
.startup = bri_startup,
|
|
.shutdown = bri_shutdown,
|
|
.hdlc_hard_xmit = bri_hdlc_hard_xmit,
|
|
.open = xpp_open,
|
|
.close = xpp_close,
|
|
.hooksig = xpp_hooksig, /* Only with RBS bits */
|
|
.ioctl = xpp_ioctl,
|
|
.maint = xpp_maint,
|
|
.echocan_create = xpp_echocan_create,
|
|
.echocan_name = xpp_echocan_name,
|
|
.assigned = xpp_span_assigned,
|
|
#ifdef DAHDI_SYNC_TICK
|
|
.sync_tick = dahdi_sync_tick,
|
|
#endif
|
|
#ifdef CONFIG_DAHDI_WATCHDOG
|
|
.watchdog = xpp_watchdog,
|
|
#endif
|
|
};
|
|
|
|
static int BRI_card_dahdi_preregistration(xpd_t *xpd, bool on)
|
|
{
|
|
xbus_t *xbus;
|
|
struct BRI_priv_data *priv;
|
|
int i;
|
|
|
|
BUG_ON(!xpd);
|
|
xbus = xpd->xbus;
|
|
priv = xpd->priv;
|
|
BUG_ON(!xbus);
|
|
XPD_DBG(GENERAL, xpd, "%s\n", (on)?"on":"off");
|
|
if(!on) {
|
|
/* Nothing to do yet */
|
|
return 0;
|
|
}
|
|
PHONEDEV(xpd).span.spantype = "BRI";
|
|
PHONEDEV(xpd).span.linecompat = DAHDI_CONFIG_AMI | DAHDI_CONFIG_CCS;
|
|
PHONEDEV(xpd).span.deflaw = DAHDI_LAW_ALAW;
|
|
BIT_SET(PHONEDEV(xpd).digital_signalling, 2); /* D-Channel */
|
|
for_each_line(xpd, i) {
|
|
struct dahdi_chan *cur_chan = XPD_CHAN(xpd, i);
|
|
|
|
XPD_DBG(GENERAL, xpd, "setting BRI channel %d\n", i);
|
|
snprintf(cur_chan->name, MAX_CHANNAME, "XPP_%s/%02d/%1d%1d/%d",
|
|
xpd->type_name, xbus->num,
|
|
xpd->addr.unit, xpd->addr.subunit, i);
|
|
cur_chan->chanpos = i + 1;
|
|
cur_chan->pvt = xpd;
|
|
if(i == 2) { /* D-CHAN */
|
|
cur_chan->sigcap = BRI_DCHAN_SIGCAP;
|
|
clear_bit(DAHDI_FLAGBIT_HDLC, &cur_chan->flags);
|
|
priv->txframe_begin = 1;
|
|
atomic_set(&priv->hdlc_pending, 0);
|
|
} else {
|
|
cur_chan->sigcap = BRI_BCHAN_SIGCAP;
|
|
}
|
|
}
|
|
CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0);
|
|
PHONEDEV(xpd).span.ops = &BRI_span_ops;
|
|
return 0;
|
|
}
|
|
|
|
static int BRI_card_dahdi_postregistration(xpd_t *xpd, bool on)
|
|
{
|
|
xbus_t *xbus;
|
|
|
|
BUG_ON(!xpd);
|
|
xbus = xpd->xbus;
|
|
BUG_ON(!xbus);
|
|
XPD_DBG(GENERAL, xpd, "%s\n", (on)?"on":"off");
|
|
return(0);
|
|
}
|
|
|
|
static int BRI_card_hooksig(xpd_t *xpd, int pos, enum dahdi_txsig txsig)
|
|
{
|
|
LINE_DBG(SIGNAL, xpd, pos, "%s\n", txsig2str(txsig));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* LED managment is done by the driver now:
|
|
* - Turn constant ON RED/GREEN led to indicate NT/TE port
|
|
* - Very fast "Double Blink" to indicate Layer1 alive (without D-Channel)
|
|
* - Constant blink (1/2 sec cycle) to indicate D-Channel alive.
|
|
*/
|
|
static void handle_leds(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
unsigned int timer_count;
|
|
int which_led;
|
|
int other_led;
|
|
int mod;
|
|
|
|
BUG_ON(!xpd);
|
|
if(IS_NT(xpd)) {
|
|
which_led = RED_LED;
|
|
other_led = GREEN_LED;
|
|
} else {
|
|
which_led = GREEN_LED;
|
|
other_led = RED_LED;
|
|
}
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
timer_count = xpd->timer_count;
|
|
if(xpd->blink_mode) {
|
|
if((timer_count % DEFAULT_LED_PERIOD) == 0) {
|
|
// led state is toggled
|
|
if(priv->ledstate[which_led] == BRI_LED_OFF) {
|
|
DO_LED(xpd, which_led, BRI_LED_ON);
|
|
DO_LED(xpd, other_led, BRI_LED_ON);
|
|
} else {
|
|
DO_LED(xpd, which_led, BRI_LED_OFF);
|
|
DO_LED(xpd, other_led, BRI_LED_OFF);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
if(priv->ledstate[other_led] != BRI_LED_OFF)
|
|
DO_LED(xpd, other_led, BRI_LED_OFF);
|
|
if(priv->dchan_alive) {
|
|
mod = timer_count % 1000;
|
|
switch(mod) {
|
|
case 0:
|
|
DO_LED(xpd, which_led, BRI_LED_ON);
|
|
break;
|
|
case 500:
|
|
DO_LED(xpd, which_led, BRI_LED_OFF);
|
|
break;
|
|
}
|
|
} else if(priv->layer1_up) {
|
|
mod = timer_count % 1000;
|
|
switch(mod) {
|
|
case 0:
|
|
case 100:
|
|
DO_LED(xpd, which_led, BRI_LED_ON);
|
|
break;
|
|
case 50:
|
|
case 150:
|
|
DO_LED(xpd, which_led, BRI_LED_OFF);
|
|
break;
|
|
}
|
|
} else {
|
|
if(priv->ledstate[which_led] != BRI_LED_ON)
|
|
DO_LED(xpd, which_led, BRI_LED_ON);
|
|
}
|
|
}
|
|
|
|
static void handle_bri_timers(xpd_t *xpd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(IS_NT(xpd)) {
|
|
if (priv->t1 > HFC_TIMER_OFF) {
|
|
if (--priv->t1 == 0) {
|
|
set_bri_timer(xpd, "T1", &priv->t1, HFC_TIMER_OFF);
|
|
if(!nt_keepalive) {
|
|
if(priv->state_register.bits.v_su_sta == ST_NT_ACTIVATING) { /* G2 */
|
|
XPD_DBG(SIGNAL, xpd, "T1 Expired. Deactivate NT\n");
|
|
clear_bit(HFC_L1_ACTIVATING, &priv->l1_flags);
|
|
nt_activation(xpd, 0); /* Deactivate NT */
|
|
} else
|
|
XPD_DBG(SIGNAL, xpd,
|
|
"T1 Expired. (state %d, ignored)\n",
|
|
priv->state_register.bits.v_su_sta);
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
if (priv->t3 > HFC_TIMER_OFF) {
|
|
/* timer expired ? */
|
|
if (--priv->t3 == 0) {
|
|
XPD_DBG(SIGNAL, xpd, "T3 expired. Deactivate TE\n");
|
|
set_bri_timer(xpd, "T3", &priv->t3, HFC_TIMER_OFF);
|
|
clear_bit(HFC_L1_ACTIVATING, &priv->l1_flags);
|
|
te_activation(xpd, 0); /* Deactivate TE */
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Poll the register ST/Up-State-machine Register, to see if the cable
|
|
* if a cable is connected to the port.
|
|
*/
|
|
static int BRI_card_tick(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(!priv->initialized || !xbus->self_ticking)
|
|
return 0;
|
|
if(poll_interval != 0 && (priv->tick_counter % poll_interval) == 0) {
|
|
// XPD_DBG(GENERAL, xpd, "%d\n", priv->tick_counter);
|
|
priv->poll_counter++;
|
|
xpp_register_request(xbus, xpd,
|
|
BRI_PORT(xpd), /* portno */
|
|
0, /* writing */
|
|
A_SU_RD_STA, /* regnum */
|
|
0, /* do_subreg */
|
|
0, /* subreg */
|
|
0, /* data_low */
|
|
0, /* do_datah */
|
|
0, /* data_high */
|
|
0 /* should_reply */
|
|
);
|
|
|
|
if(IS_NT(xpd) && nt_keepalive &&
|
|
!test_bit(HFC_L1_ACTIVATED, &priv->l1_flags) &&
|
|
!test_bit(HFC_L1_ACTIVATING, &priv->l1_flags)) {
|
|
XPD_DBG(SIGNAL, xpd, "Kick NT D-Channel\n");
|
|
nt_activation(xpd, 1);
|
|
}
|
|
}
|
|
/* Detect D-Channel disconnect heuristic */
|
|
priv->dchan_notx_ticks++;
|
|
priv->dchan_norx_ticks++;
|
|
priv->dchan_alive_ticks++;
|
|
if(priv->dchan_alive && (priv->dchan_notx_ticks > DCHAN_LOST || priv->dchan_norx_ticks > DCHAN_LOST)) {
|
|
/*
|
|
* No tx_dchan() or rx_dchan() for many ticks
|
|
* This D-Channel is probabelly dead.
|
|
*/
|
|
dchan_state(xpd, 0);
|
|
} else if(priv->dchan_rx_counter > 1 && priv->dchan_tx_counter > 1) {
|
|
if(!priv->dchan_alive)
|
|
dchan_state(xpd, 1);
|
|
}
|
|
/* Detect Layer1 disconnect */
|
|
if(priv->reg30_good && priv->reg30_ticks > poll_interval * REG30_LOST) {
|
|
/* No reply for 1/2 a second */
|
|
XPD_ERR(xpd, "Lost state tracking for %d ticks\n", priv->reg30_ticks);
|
|
priv->reg30_good = 0;
|
|
layer1_state(xpd, 0);
|
|
}
|
|
handle_leds(xbus, xpd);
|
|
handle_bri_timers(xpd);
|
|
tx_dchan(xpd);
|
|
priv->tick_counter++;
|
|
priv->reg30_ticks++;
|
|
return 0;
|
|
}
|
|
|
|
static int BRI_card_ioctl(xpd_t *xpd, int pos, unsigned int cmd, unsigned long arg)
|
|
{
|
|
BUG_ON(!xpd);
|
|
if(!XBUS_IS(xpd->xbus, READY))
|
|
return -ENODEV;
|
|
switch (cmd) {
|
|
case DAHDI_TONEDETECT:
|
|
/*
|
|
* Asterisk call all span types with this (FXS specific)
|
|
* call. Silently ignore it.
|
|
*/
|
|
LINE_DBG(SIGNAL, xpd, pos, "BRI: Starting a call\n");
|
|
return -ENOTTY;
|
|
default:
|
|
report_bad_ioctl(THIS_MODULE->name, xpd, pos, cmd);
|
|
return -ENOTTY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int BRI_card_open(xpd_t *xpd, lineno_t pos)
|
|
{
|
|
BUG_ON(!xpd);
|
|
if(pos == 2) {
|
|
LINE_DBG(SIGNAL, xpd, pos, "OFFHOOK the whole span\n");
|
|
BIT_SET(PHONEDEV(xpd).offhook_state, 0);
|
|
BIT_SET(PHONEDEV(xpd).offhook_state, 1);
|
|
BIT_SET(PHONEDEV(xpd).offhook_state, 2);
|
|
CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int BRI_card_close(xpd_t *xpd, lineno_t pos)
|
|
{
|
|
/* Clear D-Channel pending data */
|
|
if(pos == 2) {
|
|
LINE_DBG(SIGNAL, xpd, pos, "ONHOOK the whole span\n");
|
|
BIT_CLR(PHONEDEV(xpd).offhook_state, 0);
|
|
BIT_CLR(PHONEDEV(xpd).offhook_state, 1);
|
|
BIT_CLR(PHONEDEV(xpd).offhook_state, 2);
|
|
CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called only for 'span' keyword in /etc/dahdi/system.conf
|
|
*/
|
|
static int bri_spanconfig(struct file *file, struct dahdi_span *span,
|
|
struct dahdi_lineconfig *lc)
|
|
{
|
|
struct phonedev *phonedev = container_of(span, struct phonedev, span);
|
|
xpd_t *xpd = container_of(phonedev, struct xpd, phonedev);
|
|
const char *framingstr = "";
|
|
const char *codingstr = "";
|
|
const char *crcstr = "";
|
|
|
|
/* framing first */
|
|
if (lc->lineconfig & DAHDI_CONFIG_B8ZS)
|
|
framingstr = "B8ZS";
|
|
else if (lc->lineconfig & DAHDI_CONFIG_AMI)
|
|
framingstr = "AMI";
|
|
else if (lc->lineconfig & DAHDI_CONFIG_HDB3)
|
|
framingstr = "HDB3";
|
|
/* then coding */
|
|
if (lc->lineconfig & DAHDI_CONFIG_ESF)
|
|
codingstr = "ESF";
|
|
else if (lc->lineconfig & DAHDI_CONFIG_D4)
|
|
codingstr = "D4";
|
|
else if (lc->lineconfig & DAHDI_CONFIG_CCS)
|
|
codingstr = "CCS";
|
|
/* E1's can enable CRC checking */
|
|
if (lc->lineconfig & DAHDI_CONFIG_CRC4)
|
|
crcstr = "CRC4";
|
|
XPD_DBG(GENERAL, xpd, "[%s]: span=%d (%s) lbo=%d lineconfig=%s/%s/%s (0x%X) sync=%d\n",
|
|
IS_NT(xpd)?"NT":"TE",
|
|
lc->span,
|
|
lc->name,
|
|
lc->lbo,
|
|
framingstr, codingstr, crcstr,
|
|
lc->lineconfig,
|
|
lc->sync);
|
|
PHONEDEV(xpd).timing_priority = lc->sync;
|
|
elect_syncer("BRI-spanconfig");
|
|
/*
|
|
* FIXME: validate
|
|
*/
|
|
span->lineconfig = lc->lineconfig;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set signalling type (if appropriate)
|
|
* Called from dahdi with spinlock held on chan. Must not call back
|
|
* dahdi functions.
|
|
*/
|
|
static int bri_chanconfig(struct file *file, struct dahdi_chan *chan,
|
|
int sigtype)
|
|
{
|
|
DBG(GENERAL, "channel %d (%s) -> %s\n", chan->channo, chan->name, sig2str(sigtype));
|
|
// FIXME: sanity checks:
|
|
// - should be supported (within the sigcap)
|
|
// - should not replace fxs <->fxo ??? (covered by previous?)
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called only for 'span' keyword in /etc/dahdi/system.conf
|
|
*/
|
|
static int bri_startup(struct file *file, struct dahdi_span *span)
|
|
{
|
|
struct phonedev *phonedev = container_of(span, struct phonedev, span);
|
|
xpd_t *xpd = container_of(phonedev, struct xpd, phonedev);
|
|
struct BRI_priv_data *priv;
|
|
struct dahdi_chan *dchan;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(!XBUS_IS(xpd->xbus, READY)) {
|
|
XPD_DBG(GENERAL, xpd, "Startup called by dahdi. No Hardware. Ignored\n");
|
|
return -ENODEV;
|
|
}
|
|
XPD_DBG(GENERAL, xpd, "STARTUP\n");
|
|
// Turn on all channels
|
|
CALL_PHONE_METHOD(card_state, xpd, 1);
|
|
if(SPAN_REGISTERED(xpd)) {
|
|
dchan = XPD_CHAN(xpd, 2);
|
|
span->flags |= DAHDI_FLAG_RUNNING;
|
|
/*
|
|
* Dahdi (wrongly) assume that D-Channel need HDLC decoding
|
|
* and during dahdi registration override our flags.
|
|
*
|
|
* Don't Get Mad, Get Even: Now we override dahdi :-)
|
|
*/
|
|
clear_bit(DAHDI_FLAGBIT_HDLC, &dchan->flags);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called only for 'span' keyword in /etc/dahdi/system.conf
|
|
*/
|
|
static int bri_shutdown(struct dahdi_span *span)
|
|
{
|
|
struct phonedev *phonedev = container_of(span, struct phonedev, span);
|
|
xpd_t *xpd = container_of(phonedev, struct xpd, phonedev);
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(!XBUS_IS(xpd->xbus, READY)) {
|
|
XPD_DBG(GENERAL, xpd, "Shutdown called by dahdi. No Hardware. Ignored\n");
|
|
return -ENODEV;
|
|
}
|
|
XPD_DBG(GENERAL, xpd, "SHUTDOWN\n");
|
|
// Turn off all channels
|
|
CALL_PHONE_METHOD(card_state, xpd, 0);
|
|
return 0;
|
|
}
|
|
|
|
static void BRI_card_pcm_recompute(xpd_t *xpd,
|
|
xpp_line_t dont_care)
|
|
{
|
|
int i;
|
|
int line_count;
|
|
xpp_line_t pcm_mask;
|
|
uint pcm_len;
|
|
xpd_t *main_xpd;
|
|
unsigned long flags;
|
|
|
|
BUG_ON(!xpd);
|
|
main_xpd = xpd_byaddr(xpd->xbus, xpd->addr.unit, 0);
|
|
if(!main_xpd) {
|
|
XPD_DBG(DEVICES, xpd, "Unit 0 is already gone. Ignore request\n");
|
|
return;
|
|
}
|
|
/*
|
|
* We calculate all subunits, so use the main lock
|
|
* as a mutex for the whole operation.
|
|
*/
|
|
spin_lock_irqsave(&PHONEDEV(main_xpd).lock_recompute_pcm, flags);
|
|
line_count = 0;
|
|
pcm_mask = 0;
|
|
for(i = 0; i < MAX_SUBUNIT; i++) {
|
|
xpd_t *sub_xpd = xpd_byaddr(xpd->xbus, main_xpd->addr.unit, i);
|
|
|
|
if(sub_xpd) {
|
|
xpp_line_t lines =
|
|
PHONEDEV(sub_xpd).offhook_state & ~(PHONEDEV(sub_xpd).digital_signalling);
|
|
|
|
if(lines) {
|
|
pcm_mask |= PCM_SHIFT(lines, i);
|
|
line_count += 2;
|
|
}
|
|
/* subunits have fake pcm_len and wanted_pcm_mask */
|
|
if(i > 0) {
|
|
update_wanted_pcm_mask(sub_xpd, lines, 0);
|
|
}
|
|
}
|
|
}
|
|
/*
|
|
* FIXME: Workaround a bug in sync code of the Astribank.
|
|
* Send dummy PCM for sync.
|
|
*/
|
|
if(main_xpd->addr.unit == 0 && line_count == 0) {
|
|
pcm_mask = BIT(0);
|
|
line_count = 1;
|
|
}
|
|
/*
|
|
* The main unit account for all subunits (pcm_len and wanted_pcm_mask).
|
|
*/
|
|
pcm_len = (line_count)
|
|
? RPACKET_HEADERSIZE + sizeof(xpp_line_t) + line_count * DAHDI_CHUNKSIZE
|
|
: 0L;
|
|
update_wanted_pcm_mask(main_xpd, pcm_mask, pcm_len);
|
|
spin_unlock_irqrestore(&PHONEDEV(main_xpd).lock_recompute_pcm, flags);
|
|
}
|
|
|
|
static void BRI_card_pcm_fromspan(xpd_t *xpd, xpacket_t *pack)
|
|
{
|
|
byte *pcm;
|
|
unsigned long flags;
|
|
int i;
|
|
int subunit;
|
|
xpp_line_t pcm_mask = 0;
|
|
xpp_line_t wanted_lines;
|
|
|
|
|
|
BUG_ON(!xpd);
|
|
BUG_ON(!pack);
|
|
pcm = RPACKET_FIELD(pack, GLOBAL, PCM_WRITE, pcm);
|
|
for(subunit = 0; subunit < MAX_SUBUNIT; subunit++) {
|
|
xpd_t *tmp_xpd;
|
|
|
|
tmp_xpd = xpd_byaddr(xpd->xbus, xpd->addr.unit, subunit);
|
|
if(!tmp_xpd || !tmp_xpd->card_present)
|
|
continue;
|
|
spin_lock_irqsave(&tmp_xpd->lock, flags);
|
|
wanted_lines = PHONEDEV(tmp_xpd).wanted_pcm_mask;
|
|
for_each_line(tmp_xpd, i) {
|
|
struct dahdi_chan *chan = XPD_CHAN(tmp_xpd, i);
|
|
|
|
if(IS_SET(wanted_lines, i)) {
|
|
if(SPAN_REGISTERED(tmp_xpd)) {
|
|
#ifdef DEBUG_PCMTX
|
|
int channo = chan->channo;
|
|
|
|
if(pcmtx >= 0 && pcmtx_chan == channo)
|
|
memset((u_char *)pcm, pcmtx, DAHDI_CHUNKSIZE);
|
|
else
|
|
#endif
|
|
memcpy((u_char *)pcm, chan->writechunk, DAHDI_CHUNKSIZE);
|
|
} else
|
|
memset((u_char *)pcm, 0x7F, DAHDI_CHUNKSIZE);
|
|
pcm += DAHDI_CHUNKSIZE;
|
|
}
|
|
}
|
|
pcm_mask |= PCM_SHIFT(wanted_lines, subunit);
|
|
XPD_COUNTER(tmp_xpd, PCM_WRITE)++;
|
|
spin_unlock_irqrestore(&tmp_xpd->lock, flags);
|
|
}
|
|
RPACKET_FIELD(pack, GLOBAL, PCM_WRITE, lines) = pcm_mask;
|
|
}
|
|
|
|
static void BRI_card_pcm_tospan(xpd_t *xpd, xpacket_t *pack)
|
|
{
|
|
byte *pcm;
|
|
xpp_line_t pcm_mask;
|
|
unsigned long flags;
|
|
int subunit;
|
|
int i;
|
|
|
|
/*
|
|
* Subunit 0 handle all other subunits
|
|
*/
|
|
if(xpd->addr.subunit != 0)
|
|
return;
|
|
if(!SPAN_REGISTERED(xpd))
|
|
return;
|
|
pcm = RPACKET_FIELD(pack, GLOBAL, PCM_READ, pcm);
|
|
pcm_mask = RPACKET_FIELD(pack, GLOBAL, PCM_WRITE, lines);
|
|
for(subunit = 0; subunit < MAX_SUBUNIT; subunit++, pcm_mask >>= SUBUNIT_PCM_SHIFT) {
|
|
xpd_t *tmp_xpd;
|
|
|
|
if(!pcm_mask)
|
|
break; /* optimize */
|
|
tmp_xpd = xpd_byaddr(xpd->xbus, xpd->addr.unit, subunit);
|
|
if(!tmp_xpd || !tmp_xpd->card_present || !SPAN_REGISTERED(tmp_xpd))
|
|
continue;
|
|
spin_lock_irqsave(&tmp_xpd->lock, flags);
|
|
for (i = 0; i < 2; i++) {
|
|
xpp_line_t tmp_mask = pcm_mask & (BIT(0) | BIT(1));
|
|
volatile u_char *r;
|
|
|
|
if(IS_SET(tmp_mask, i)) {
|
|
r = XPD_CHAN(tmp_xpd, i)->readchunk;
|
|
// memset((u_char *)r, 0x5A, DAHDI_CHUNKSIZE); // DEBUG
|
|
memcpy((u_char *)r, pcm, DAHDI_CHUNKSIZE);
|
|
pcm += DAHDI_CHUNKSIZE;
|
|
}
|
|
}
|
|
XPD_COUNTER(tmp_xpd, PCM_READ)++;
|
|
spin_unlock_irqrestore(&tmp_xpd->lock, flags);
|
|
}
|
|
}
|
|
|
|
static int BRI_timing_priority(xpd_t *xpd)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if (priv->layer1_up)
|
|
return PHONEDEV(xpd).timing_priority;
|
|
XPD_DBG(SYNC, xpd, "No timing priority (no layer1)\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
int BRI_echocancel_timeslot(xpd_t *xpd, int pos)
|
|
{
|
|
return xpd->addr.subunit * 4 + pos;
|
|
}
|
|
|
|
static int BRI_echocancel_setmask(xpd_t *xpd, xpp_line_t ec_mask)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
int i;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
XPD_DBG(GENERAL, xpd, "0x%8X\n", ec_mask);
|
|
if (!ECHOOPS(xpd->xbus)) {
|
|
XPD_DBG(GENERAL, xpd,
|
|
"No echo canceller in XBUS: Doing nothing.\n");
|
|
return -EINVAL;
|
|
}
|
|
for (i = 0; i < PHONEDEV(xpd).channels - 1; i++) {
|
|
int on = BIT(i) & ec_mask;
|
|
|
|
CALL_EC_METHOD(ec_set, xpd->xbus, xpd, i, on);
|
|
}
|
|
CALL_EC_METHOD(ec_update, xpd->xbus, xpd->xbus);
|
|
return 0;
|
|
}
|
|
|
|
/*---------------- BRI: HOST COMMANDS -------------------------------------*/
|
|
|
|
static /* 0x33 */ HOSTCMD(BRI, SET_LED, enum bri_led_names which_led, enum led_state to_led_state)
|
|
{
|
|
int ret = 0;
|
|
xframe_t *xframe;
|
|
xpacket_t *pack;
|
|
struct bri_leds *bri_leds;
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xbus);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
XPD_DBG(LEDS, xpd, "%s -> %d\n",
|
|
(which_led)?"RED":"GREEN",
|
|
to_led_state);
|
|
XFRAME_NEW_CMD(xframe, pack, xbus, BRI, SET_LED, xpd->xbus_idx);
|
|
bri_leds = &RPACKET_FIELD(pack, BRI, SET_LED, bri_leds);
|
|
bri_leds->state = to_led_state;
|
|
bri_leds->led_sel = which_led;
|
|
XPACKET_LEN(pack) = RPACKET_SIZE(BRI, SET_LED);
|
|
ret = send_cmd_frame(xbus, xframe);
|
|
priv->ledstate[which_led] = to_led_state;
|
|
return ret;
|
|
}
|
|
|
|
static int write_state_register(xpd_t *xpd, byte value)
|
|
{
|
|
int ret;
|
|
|
|
XPD_DBG(REGS, xpd, "value = 0x%02X\n", value);
|
|
ret = xpp_register_request(xpd->xbus, xpd,
|
|
BRI_PORT(xpd), /* portno */
|
|
1, /* writing */
|
|
A_SU_WR_STA, /* regnum */
|
|
0, /* do_subreg */
|
|
0, /* subreg */
|
|
value, /* data_low */
|
|
0, /* do_datah */
|
|
0, /* data_high */
|
|
0 /* should_reply */
|
|
);
|
|
return ret;
|
|
}
|
|
|
|
/*---------------- BRI: Astribank Reply Handlers --------------------------*/
|
|
static void su_new_state(xpd_t *xpd, byte reg_x30)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
su_rd_sta_t new_state;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(!priv->initialized) {
|
|
XPD_ERR(xpd, "%s called on uninitialized AB\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
new_state.reg = reg_x30;
|
|
if(new_state.bits.v_su_t2_exp) {
|
|
XPD_NOTICE(xpd, "T2 Expired\n");
|
|
}
|
|
priv->reg30_ticks = 0;
|
|
priv->reg30_good = 1;
|
|
if (priv->state_register.bits.v_su_sta == new_state.bits.v_su_sta)
|
|
return; /* same same */
|
|
XPD_DBG(SIGNAL, xpd, "%02X ---> %02X (info0=%d) (%s%i)\n",
|
|
priv->state_register.reg,
|
|
reg_x30,
|
|
new_state.bits.v_su_info0,
|
|
IS_NT(xpd)?"G":"F",
|
|
new_state.bits.v_su_sta);
|
|
if(!IS_NT(xpd)) {
|
|
switch (new_state.bits.v_su_sta) {
|
|
case ST_TE_DEACTIVATED: /* F3 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_TE_DEACTIVATED (F3)\n");
|
|
clear_bit(HFC_L1_ACTIVATED, &priv->l1_flags);
|
|
layer1_state(xpd, 0);
|
|
break;
|
|
case ST_TE_SIGWAIT: /* F4 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_TE_SIGWAIT (F4)\n");
|
|
layer1_state(xpd, 0);
|
|
break;
|
|
case ST_TE_IDENT: /* F5 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_TE_IDENT (F5)\n");
|
|
layer1_state(xpd, 0);
|
|
break;
|
|
case ST_TE_SYNCED: /* F6 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_TE_SYNCED (F6)\n");
|
|
layer1_state(xpd, 0);
|
|
break;
|
|
case ST_TE_ACTIVATED: /* F7 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_TE_ACTIVATED (F7)\n");
|
|
set_bri_timer(xpd, "T3", &priv->t3, HFC_TIMER_OFF);
|
|
clear_bit(HFC_L1_ACTIVATING, &priv->l1_flags);
|
|
set_bit(HFC_L1_ACTIVATED, &priv->l1_flags);
|
|
layer1_state(xpd, 1);
|
|
update_xpd_status(xpd, DAHDI_ALARM_NONE);
|
|
break;
|
|
case ST_TE_LOST_FRAMING: /* F8 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_TE_LOST_FRAMING (F8)\n");
|
|
layer1_state(xpd, 0);
|
|
break;
|
|
default:
|
|
XPD_NOTICE(xpd, "Bad TE state: %d\n", new_state.bits.v_su_sta);
|
|
break;
|
|
}
|
|
|
|
} else {
|
|
switch (new_state.bits.v_su_sta) {
|
|
case ST_NT_DEACTIVATED: /* G1 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_NT_DEACTIVATED (G1)\n");
|
|
clear_bit(HFC_L1_ACTIVATED, &priv->l1_flags);
|
|
set_bri_timer(xpd, "T1", &priv->t1, HFC_TIMER_OFF);
|
|
layer1_state(xpd, 0);
|
|
break;
|
|
case ST_NT_ACTIVATING: /* G2 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_NT_ACTIVATING (G2)\n");
|
|
layer1_state(xpd, 0);
|
|
if(!test_bit(HFC_L1_ACTIVATED, &priv->l1_flags))
|
|
nt_activation(xpd, 1);
|
|
break;
|
|
case ST_NT_ACTIVATED: /* G3 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_NT_ACTIVATED (G3)\n");
|
|
clear_bit(HFC_L1_ACTIVATING, &priv->l1_flags);
|
|
set_bit(HFC_L1_ACTIVATED, &priv->l1_flags);
|
|
set_bri_timer(xpd, "T1", &priv->t1, HFC_TIMER_OFF);
|
|
layer1_state(xpd, 1);
|
|
update_xpd_status(xpd, DAHDI_ALARM_NONE);
|
|
break;
|
|
case ST_NT_DEACTIVTING: /* G4 */
|
|
XPD_DBG(SIGNAL, xpd, "State ST_NT_DEACTIVTING (G4)\n");
|
|
set_bri_timer(xpd, "T1", &priv->t1, HFC_TIMER_OFF);
|
|
layer1_state(xpd, 0);
|
|
break;
|
|
default:
|
|
XPD_NOTICE(xpd, "Bad NT state: %d\n", new_state.bits.v_su_sta);
|
|
break;
|
|
}
|
|
}
|
|
priv->state_register.reg = new_state.reg;
|
|
}
|
|
|
|
static int BRI_card_register_reply(xbus_t *xbus, xpd_t *xpd, reg_cmd_t *info)
|
|
{
|
|
unsigned long flags;
|
|
struct BRI_priv_data *priv;
|
|
struct xpd_addr addr;
|
|
xpd_t *orig_xpd;
|
|
int ret;
|
|
|
|
/* Map UNIT + PORTNUM to XPD */
|
|
orig_xpd = xpd;
|
|
addr.unit = orig_xpd->addr.unit;
|
|
addr.subunit = info->portnum;
|
|
xpd = xpd_byaddr(xbus, addr.unit, addr.subunit);
|
|
if(!xpd) {
|
|
static int rate_limit;
|
|
|
|
if((rate_limit++ % 1003) < 5)
|
|
notify_bad_xpd(__FUNCTION__, xbus, addr , orig_xpd->xpdname);
|
|
return -EPROTO;
|
|
}
|
|
spin_lock_irqsave(&xpd->lock, flags);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(REG_FIELD(info, do_subreg)) {
|
|
XPD_DBG(REGS, xpd, "RI %02X %02X %02X\n",
|
|
REG_FIELD(info, regnum), REG_FIELD(info, subreg), REG_FIELD(info, data_low));
|
|
} else {
|
|
if (REG_FIELD(info, regnum) != A_SU_RD_STA)
|
|
XPD_DBG(REGS, xpd, "RD %02X %02X\n",
|
|
REG_FIELD(info, regnum), REG_FIELD(info, data_low));
|
|
else
|
|
XPD_DBG(REGS, xpd, "Got SU_RD_STA=%02X\n",
|
|
REG_FIELD(info, data_low));
|
|
}
|
|
if(info->is_multibyte) {
|
|
XPD_DBG(REGS, xpd, "Got Multibyte: %d bytes, eoframe: %d\n",
|
|
info->bytes, info->eoframe);
|
|
ret = rx_dchan(xpd, info);
|
|
if (ret < 0) {
|
|
priv->dchan_rx_drops++;
|
|
if(atomic_read(&PHONEDEV(xpd).open_counter) > 0)
|
|
XPD_NOTICE(xpd, "Multibyte Drop: errno=%d\n", ret);
|
|
}
|
|
goto end;
|
|
}
|
|
if(REG_FIELD(info, regnum) == A_SU_RD_STA) {
|
|
su_new_state(xpd, REG_FIELD(info, data_low));
|
|
}
|
|
|
|
/* Update /proc info only if reply relate to the last slic read request */
|
|
if(
|
|
REG_FIELD(&xpd->requested_reply, regnum) == REG_FIELD(info, regnum) &&
|
|
REG_FIELD(&xpd->requested_reply, do_subreg) == REG_FIELD(info, do_subreg) &&
|
|
REG_FIELD(&xpd->requested_reply, subreg) == REG_FIELD(info, subreg)) {
|
|
xpd->last_reply = *info;
|
|
}
|
|
|
|
end:
|
|
spin_unlock_irqrestore(&xpd->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int BRI_card_state(xpd_t *xpd, bool on)
|
|
{
|
|
struct BRI_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
XPD_DBG(GENERAL, xpd, "%s\n", (on)?"ON":"OFF");
|
|
if(on) {
|
|
if(!test_bit(HFC_L1_ACTIVATED, &priv->l1_flags)) {
|
|
if( ! IS_NT(xpd))
|
|
te_activation(xpd, 1);
|
|
else
|
|
nt_activation(xpd, 1);
|
|
}
|
|
} else if(IS_NT(xpd))
|
|
nt_activation(xpd, 0);
|
|
return 0;
|
|
}
|
|
|
|
static const struct xops bri_xops = {
|
|
.card_new = BRI_card_new,
|
|
.card_init = BRI_card_init,
|
|
.card_remove = BRI_card_remove,
|
|
.card_tick = BRI_card_tick,
|
|
.card_register_reply = BRI_card_register_reply,
|
|
};
|
|
|
|
static const struct phoneops bri_phoneops = {
|
|
.card_dahdi_preregistration = BRI_card_dahdi_preregistration,
|
|
.card_dahdi_postregistration = BRI_card_dahdi_postregistration,
|
|
.card_hooksig = BRI_card_hooksig,
|
|
.card_pcm_recompute = BRI_card_pcm_recompute,
|
|
.card_pcm_fromspan = BRI_card_pcm_fromspan,
|
|
.card_pcm_tospan = BRI_card_pcm_tospan,
|
|
.card_timing_priority = BRI_timing_priority,
|
|
.echocancel_timeslot = BRI_echocancel_timeslot,
|
|
.echocancel_setmask = BRI_echocancel_setmask,
|
|
.card_ioctl = BRI_card_ioctl,
|
|
.card_open = BRI_card_open,
|
|
.card_close = BRI_card_close,
|
|
.card_state = BRI_card_state,
|
|
};
|
|
|
|
static xproto_table_t PROTO_TABLE(BRI) = {
|
|
.owner = THIS_MODULE,
|
|
.entries = {
|
|
/* Table Card Opcode */
|
|
},
|
|
.name = "BRI", /* protocol name */
|
|
.ports_per_subunit = 1,
|
|
.type = XPD_TYPE_BRI,
|
|
.xops = &bri_xops,
|
|
.phoneops = &bri_phoneops,
|
|
.packet_is_valid = bri_packet_is_valid,
|
|
.packet_dump = bri_packet_dump,
|
|
};
|
|
|
|
static bool bri_packet_is_valid(xpacket_t *pack)
|
|
{
|
|
const xproto_entry_t *xe = NULL;
|
|
// DBG(GENERAL, "\n");
|
|
xe = xproto_card_entry(&PROTO_TABLE(BRI), XPACKET_OP(pack));
|
|
return xe != NULL;
|
|
}
|
|
|
|
static void bri_packet_dump(const char *msg, xpacket_t *pack)
|
|
{
|
|
DBG(GENERAL, "%s\n", msg);
|
|
}
|
|
/*------------------------- REGISTER Handling --------------------------*/
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
static int proc_bri_info_read(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
unsigned long flags;
|
|
xpd_t *xpd = data;
|
|
struct BRI_priv_data *priv;
|
|
|
|
DBG(PROC, "\n");
|
|
if(!xpd)
|
|
return -ENODEV;
|
|
spin_lock_irqsave(&xpd->lock, flags);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
len += sprintf(page + len, "%05d Layer 1: ", priv->poll_counter);
|
|
if(priv->reg30_good) {
|
|
len += sprintf(page + len, "%-5s ", (priv->layer1_up) ? "UP" : "DOWN");
|
|
len += sprintf(page + len, "%c%d %-15s -- fr_sync=%d t2_exp=%d info0=%d g2_g3=%d\n",
|
|
IS_NT(xpd)?'G':'F',
|
|
priv->state_register.bits.v_su_sta,
|
|
xhfc_state_name(IS_NT(xpd), priv->state_register.bits.v_su_sta),
|
|
priv->state_register.bits.v_su_fr_sync,
|
|
priv->state_register.bits.v_su_t2_exp,
|
|
priv->state_register.bits.v_su_info0,
|
|
priv->state_register.bits.v_g2_g3);
|
|
} else
|
|
len += sprintf(page + len, "Unknown\n");
|
|
if(IS_NT(xpd)) {
|
|
len += sprintf(page + len, "T1 Timer: %d\n", priv->t1);
|
|
} else {
|
|
len += sprintf(page + len, "T3 Timer: %d\n", priv->t3);
|
|
}
|
|
len += sprintf(page + len, "Tick Counter: %d\n", priv->tick_counter);
|
|
len += sprintf(page + len, "Last Poll Reply: %d ticks ago\n", priv->reg30_ticks);
|
|
len += sprintf(page + len, "reg30_good=%d\n", priv->reg30_good);
|
|
len += sprintf(page + len, "D-Channel: TX=[%5d] RX=[%5d] BAD=[%5d] ",
|
|
priv->dchan_tx_counter, priv->dchan_rx_counter, priv->dchan_rx_drops);
|
|
if(priv->dchan_alive) {
|
|
len += sprintf(page + len, "(alive %d K-ticks)\n",
|
|
priv->dchan_alive_ticks/1000);
|
|
} else {
|
|
len += sprintf(page + len, "(dead)\n");
|
|
}
|
|
len += sprintf(page + len, "dchan_notx_ticks: %d\n", priv->dchan_notx_ticks);
|
|
len += sprintf(page + len, "dchan_norx_ticks: %d\n", priv->dchan_norx_ticks);
|
|
len += sprintf(page + len, "LED: %-10s = %d\n", "GREEN", priv->ledstate[GREEN_LED]);
|
|
len += sprintf(page + len, "LED: %-10s = %d\n", "RED", priv->ledstate[RED_LED]);
|
|
len += sprintf(page + len, "\nDCHAN:\n");
|
|
len += sprintf(page + len, "\n");
|
|
spin_unlock_irqrestore(&xpd->lock, flags);
|
|
if (len <= off+count)
|
|
*eof = 1;
|
|
*start = page + off;
|
|
len -= off;
|
|
if (len > count)
|
|
len = count;
|
|
if (len < 0)
|
|
len = 0;
|
|
return len;
|
|
}
|
|
#endif
|
|
|
|
static int bri_xpd_probe(struct device *dev)
|
|
{
|
|
xpd_t *xpd;
|
|
|
|
xpd = dev_to_xpd(dev);
|
|
/* Is it our device? */
|
|
if(xpd->type != XPD_TYPE_BRI) {
|
|
XPD_ERR(xpd, "drop suggestion for %s (%d)\n",
|
|
dev_name(dev), xpd->type);
|
|
return -EINVAL;
|
|
}
|
|
XPD_DBG(DEVICES, xpd, "SYSFS\n");
|
|
return 0;
|
|
}
|
|
|
|
static int bri_xpd_remove(struct device *dev)
|
|
{
|
|
xpd_t *xpd;
|
|
|
|
xpd = dev_to_xpd(dev);
|
|
XPD_DBG(DEVICES, xpd, "SYSFS\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct xpd_driver bri_driver = {
|
|
.type = XPD_TYPE_BRI,
|
|
.driver = {
|
|
.name = "bri",
|
|
#ifndef OLD_HOTPLUG_SUPPORT
|
|
.owner = THIS_MODULE,
|
|
#endif
|
|
.probe = bri_xpd_probe,
|
|
.remove = bri_xpd_remove
|
|
}
|
|
};
|
|
|
|
static int __init card_bri_startup(void)
|
|
{
|
|
int ret;
|
|
|
|
if((ret = xpd_driver_register(&bri_driver.driver)) < 0)
|
|
return ret;
|
|
INFO("revision %s\n", XPP_VERSION);
|
|
xproto_register(&PROTO_TABLE(BRI));
|
|
return 0;
|
|
}
|
|
|
|
static void __exit card_bri_cleanup(void)
|
|
{
|
|
DBG(GENERAL, "\n");
|
|
xproto_unregister(&PROTO_TABLE(BRI));
|
|
xpd_driver_unregister(&bri_driver.driver);
|
|
}
|
|
|
|
MODULE_DESCRIPTION("XPP BRI Card Driver");
|
|
MODULE_AUTHOR("Oron Peled <oron@actcom.co.il>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(XPP_VERSION);
|
|
MODULE_ALIAS_XPD(XPD_TYPE_BRI);
|
|
|
|
module_init(card_bri_startup);
|
|
module_exit(card_bri_cleanup);
|