aa8bd2f546
This is a partial revert of r10234 "wct4xxp: __t4_framer_in and __t4_framer_out speedups." There were some platform + firmware version combinations that would fail to properly configure the framer with the aforementioned speedups. The originally reported sympton was that interrupts would fail to start and while troubleshooting I also saw cases where one of the spans would stay in alarm after starting. By adding in additional reads to the version register, the overall process of writing / reading from the framer control registers is slowed down which increases reliability. This change does *not* affect the main path of TDM data which is DMAed directly into buffers in host memory and are not read / written to / from framer registers directly. Reported-and-Tested-by: Vahan Yerkanian <vahan@arminco.com> Signed-off-by: Shaun Ruffell <sruffell@digium.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10559 a0bf4364-ded3-4de4-8d8a-66a801d63aff |
||
|---|---|---|
| .. | ||
| base.c | ||
| Kbuild | ||
| Makefile | ||
| vpm450m.c | ||
| vpm450m.h | ||
| wct4xxp-diag.c | ||
| wct4xxp.h | ||