8b43a66913
Link live/usr/share/dahdi/xpp.conf from live/etc/dahdi/xpp.conf in 'config'. This makes the 'live' xpp.conf used rather than the global xpp.conf . Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9508 a0bf4364-ded3-4de4-8d8a-66a801d63aff
332 lines
8.6 KiB
Bash
Executable File
332 lines
8.6 KiB
Bash
Executable File
#!/bin/sh
|
|
|
|
LINUX_DIR=${LINUX_DIR:=.}
|
|
TOOLS_DIR=${TOOLS_DIR:=../dahdi-tools}
|
|
DYNAMIC_LOC="${DYNAMIC_LOC:-no}"
|
|
DESTDIR=$PWD/live
|
|
LIVE_DAHDI_RSYNC_DIR=${LIVE_DAHDI_RSYNC_DIR:-/tmp/dahdi}
|
|
KVERS=${KVERS:-`uname -r`}
|
|
XPP_SYNC=${XPP_SYNC:-auto}
|
|
AST_SCRIPT=${AST_SCRIPT:-/etc/init.d/asterisk}
|
|
# Use this file to pass options to modules:
|
|
PERLLIBDIR=`perl -V:sitelib | cut -d "'" -f 2`
|
|
EXTRA_MODS="crc_ccitt"
|
|
|
|
# Manual list of modules. They will be loaded by insmod.
|
|
# If reside in a subdir, add it explicitly.
|
|
|
|
MODULES_LOAD="${MODULES_LOAD:-dahdi dahdi_echocan_mg2}"
|
|
|
|
# this one *is* resolved recusively.
|
|
# the only reason to set a different value is if you use hpec / oslec,
|
|
# as Zaptel depends on them.
|
|
REMOVE_MODULES="${REMOVE_MODULES:-dahdi}" # "dahdi oslec"?
|
|
|
|
if [ -r $DESTDIR/live.conf ]; then . $DESTDIR/live.conf; fi
|
|
|
|
MODULES_DIR="$DESTDIR/lib/modules/$KVERS/dahdi"
|
|
if [ ! -d "$LINUX_DIR" ]; then
|
|
echo >&2 "$0:dahdi-linux dir '$LINUX_DIR' does not exits. Aborting".
|
|
exit 1
|
|
fi
|
|
|
|
set -e
|
|
LINUX_DIR_FULL=`(cd $LINUX_DIR; pwd)`
|
|
|
|
set_tools_dir() {
|
|
if [ ! -d "$TOOLS_DIR" ]; then
|
|
echo >&2 "$0:dahdi-tools dir '$TOOLS_DIR' does not exits. Aborting".
|
|
exit 1
|
|
fi
|
|
TOOLS_DIR_FULL=`(cd $TOOLS_DIR; pwd)`
|
|
}
|
|
|
|
# Give priority to our installed binaries:
|
|
PATH=$DESTDIR/sbin:$DESTDIR/usr/sbin:$PATH
|
|
export PATH
|
|
|
|
# TODO: If you already use PERL5DIR, please fix this part:
|
|
PERL5LIB="$DESTDIR/$PERLLIBDIR"
|
|
export PERL5LIB
|
|
|
|
# used in xpp_fxloader:
|
|
FIRMWARE_DIR="$DESTDIR/usr/share/dahdi"
|
|
export FIRMWARE_DIR
|
|
|
|
ASTRIBANK_TOOL="$DESTDIR/usr/sbin/astribank_tool"
|
|
export ASTRIBANK_TOOL
|
|
|
|
ASTRIBANK_HEXLOAD="$DESTDIR/usr/sbin/astribank_hexload"
|
|
export ASTRIBANK_HEXLOAD
|
|
|
|
# make sure Astribank initialization scripts are from our tree.
|
|
xpp_ARGS="$xpp_ARGS initdir=$FIRMWARE_DIR"
|
|
#dahdi_ARGS="$dahdi_ARGS initdir=$FIRMWARE_DIR"
|
|
|
|
if [ "$DYNAMIC_LOC" = 'yes' ]; then
|
|
MODULES_LOAD="$MODULES_LOAD dahdi_dynamic dahdi_dynamic_loc"
|
|
fi
|
|
|
|
# the same as xpp/utils/dahdi_drivers .
|
|
# With the remote mode, I can't rely on files in the source directory.
|
|
dahdi_drivers() {
|
|
perl -MDahdi::Hardware -e '
|
|
my @drivers = Dahdi::Hardware->drivers;
|
|
print join(" ", @drivers);
|
|
'
|
|
}
|
|
|
|
# Add modules for existing hardware on the system for the list of
|
|
# modules to load.
|
|
#
|
|
# As module loading is manual with insmod, some manual fixes are needed.
|
|
set_modules_to_load() {
|
|
for mod in `dahdi_drivers`; do
|
|
case "$mod" in
|
|
xpp_usb)
|
|
MODULES_LOAD="$MODULES_LOAD xpp/xpp xpp/xpd_fxs"
|
|
MODULES_LOAD="$MODULES_LOAD xpp/xpd_fxo xpp/xpd_pri"
|
|
if [ -r "$MODULES_DIR/xpp/xpd_bri.ko" ]; then
|
|
MODULES_LOAD="$MODULES_LOAD xpp/xpd_bri"
|
|
fi
|
|
MODULES_LOAD="$MODULES_LOAD xpp/xpp_usb"
|
|
;;
|
|
wctdm24xxp | wcte12xp)
|
|
# FIXME: better automation of the voicebus
|
|
# dependency:
|
|
MODULES_LOAD="$MODULES_LOAD voicebus/dahdi_voicebus $mod/$mod"
|
|
EXTRA_MODS="$EXTRA_MODS firmware_class"
|
|
;;
|
|
wct4xxp | wcte12xp | wctc4xp | wcb4xxp)
|
|
MODULES_LOAD="$MODULES_LOAD $mod/$mod"
|
|
;;
|
|
wanpipe)
|
|
: # requires different handling
|
|
;;
|
|
*)
|
|
MODULES_LOAD="$MODULES_LOAD $mod"
|
|
;;
|
|
esac
|
|
done
|
|
}
|
|
|
|
# Initialize the Xorcom Astribank (xpp/) using perl utiliites:
|
|
# intended to replace all the the three functions below if user has
|
|
# installed the dahdi-perl utilities.
|
|
xpp_startup() {
|
|
# do nothing if there are no astribank devices:
|
|
if ! grep -q connected /proc/xpp/xbuses 2>/dev/null; then return 0; fi
|
|
|
|
echo "Waiting for Astribank devices to initialize:"
|
|
"$FIRMWARE_DIR/waitfor_xpds" # Asusmes a recent dahdi-tools
|
|
|
|
# overriding locales for the above two, as perl can be noisy
|
|
# when locales are missing.
|
|
# No register all the devices if they didn't auto-register:
|
|
LC_ALL=C dahdi_registration on
|
|
|
|
# this one could actually be run after dahdi_cfg:
|
|
LC_ALL=C xpp_sync "$XPP_SYNC"
|
|
}
|
|
|
|
# recursively unload a module and its dependencies, if possible.
|
|
# where's modprobe -r when you need it?
|
|
# inputs: module to unload.
|
|
# returns: the result from
|
|
unload_module() {
|
|
module="$1"
|
|
line=`lsmod 2>/dev/null | grep "^$1 " || :`
|
|
if [ "$line" = '' ]; then return; fi # module was not loaded
|
|
|
|
set -- $line
|
|
# $1: the original module, $2: size, $3: refcount, $4: deps list
|
|
mods=`echo $4 | tr , ' '`
|
|
ec_modules=""
|
|
# xpp_usb keeps the xpds below busy if an xpp hardware is
|
|
# connected. Hence must be removed before them:
|
|
case "$module" in xpd_*) mods="xpp_usb $mods";; esac
|
|
|
|
for mod in $mods; do
|
|
case "$mod" in
|
|
dahdi_echocan_*)
|
|
ec_modules="$mod $ec_modules"
|
|
;;
|
|
*)
|
|
# run in a subshell, so it won't step over our vars:
|
|
(unload_module $mod)
|
|
;;
|
|
esac
|
|
done
|
|
# Now that all the other dependencies are unloaded, we can unload the
|
|
# dahdi_echocan modules. The drivers that register spans may keep
|
|
# references on the echocan modules before they are unloaded.
|
|
for mod in $ec_modules; do
|
|
(unload_module $mod)
|
|
done
|
|
rmmod $module
|
|
}
|
|
|
|
load_dynamic() {
|
|
if [ "$DYNAMIC_LOC" != yes ]; then return; fi
|
|
|
|
local conf_file="$DESTDIR/etc/dahdi/dynamic.conf"
|
|
if [ ! -r "$conf_file" ]; then
|
|
cat <<EOF >"$conf_file"
|
|
dynamic=loc,1:0,5,0
|
|
dynamic=loc,1:1,5,0
|
|
EOF
|
|
fi
|
|
|
|
dahdi_cfg -c "$conf_file"
|
|
}
|
|
|
|
unload_dynamic() {
|
|
if [ "$DYNAMIC_LOC" != yes ]; then return; fi
|
|
|
|
local conf_file="$DESTDIR/etc/dahdi/dynamic.conf"
|
|
if [ ! -r "$conf_file" ]; then return; fi
|
|
|
|
dahdi_cfg -c "$conf_file" -s || :
|
|
}
|
|
|
|
genconf() {
|
|
GENCONF_PARAMETERS=$DESTDIR/etc/dahdi/genconf_parameters \
|
|
DAHDI_CONF_FILE=$DESTDIR/etc/dahdi/system.conf \
|
|
DAHDI_MODS_FILE=$DESTDIR/etc/dahdi/modules \
|
|
CHAN_DAHDI_CHANNELS_FILE=$DESTDIR/etc/asterisk/dahdi-channels.conf \
|
|
dahdi_genconf
|
|
if [ "$DYNAMIC_LOC" = yes ]; then
|
|
cat "$DESTDIR/etc/dahdi/dynamic.conf" >>"$DESTDIR/etc/dahdi/system.conf"
|
|
fi
|
|
dahdi_cfg -c $DESTDIR/etc/dahdi/system.conf
|
|
# TODO: fxotune, hpec
|
|
}
|
|
|
|
run_asterisk() {
|
|
$AST_SCRIPT start
|
|
}
|
|
|
|
usage() {
|
|
me=`basename $0`
|
|
echo "$me: Run DAHDI in a test environment"
|
|
echo 'Version: $Id$'
|
|
echo ''
|
|
echo "Usage: equivalent of:"
|
|
echo "$me configure ./configure"
|
|
echo "$me install make install"
|
|
echo "$me config make config"
|
|
echo "$me unload /etc/init.d/dahdi stop"
|
|
echo "$me load /etc/init.d/dahdi start"
|
|
echo "$me reload /etc/init.d/dahdi restart"
|
|
echo "$me xpp-firm (Reset and load xpp firmware)"
|
|
echo "$me genconf dahdi_genconf; dahdi_cfg"
|
|
echo "$me asterisk /etc/init.d/asterisk start"
|
|
echo "$me rsync TARGET (copy filea to /tmp/live in host TARGET)"
|
|
echo "$me exec COMMAND (Run COMMAND in 'live' environment)"
|
|
echo ""
|
|
echo "dahdi-linux: $LINUX_DIR"
|
|
echo "dahdi-tools: $TOOLS_DIR"
|
|
}
|
|
|
|
case "$1" in
|
|
configure)
|
|
shift
|
|
set_tools_dir
|
|
cd "$TOOLS_DIR"; ./configure --with-dahdi="$LINUX_DIR_FULL" "$@"
|
|
;;
|
|
install)
|
|
shift
|
|
set_tools_dir
|
|
cd "$LINUX_DIR"; make install DESTDIR=$DESTDIR "$@"
|
|
cd "$TOOLS_DIR_FULL"; make install DESTDIR=$DESTDIR DYNFS=yes "$@"
|
|
;;
|
|
config)
|
|
shift
|
|
set_tools_dir
|
|
cd "$TOOLS_DIR"; make config DESTDIR=$DESTDIR "$@"
|
|
mkdir -p $DESTDIR/etc/asterisk
|
|
cat >"$FIRMWARE_DIR/live-init.conf" <<EOF
|
|
PATH="$PATH" # FIXME: add to existing \$PATH?
|
|
export PATH
|
|
dahdiconfdir="${DESTDIR}/etc/dahdi"
|
|
export dahdiconfdir
|
|
EOF
|
|
ln -s ../../../etc/dahdi/xpp.conf "$DESTDIR/usr/share/dahdi/
|
|
;;
|
|
rsync)
|
|
if [ $# -ne 2 ]; then
|
|
echo >&2 "$0: Error: rsync requires a target parameter".
|
|
exit 1
|
|
fi
|
|
# copy the script itself and the installed directory to the
|
|
# target host:
|
|
rsync -ai "$0" $DESTDIR "$2:$LIVE_DAHDI_RSYNC_DIR"
|
|
;;
|
|
unload)
|
|
# OK for Asterisk not to be running. TODO: a better test?
|
|
$AST_SCRIPT stop || :
|
|
unload_dynamic
|
|
for mod in $REMOVE_MODULES; do
|
|
unload_module $mod
|
|
done
|
|
;;
|
|
load)
|
|
# TODO: Find a way to use modprobe.
|
|
# Or implement a way to pass arguments to modules here (yuck)
|
|
set_modules_to_load
|
|
for mod in $EXTRA_MODS; do
|
|
modprobe $mod || : # FIXME: Make this optional?
|
|
done
|
|
for module in $MODULES_LOAD; do
|
|
eval module_args="\$`basename ${module}`_ARGS"
|
|
insmod $MODULES_DIR/$module.ko $module_args
|
|
done
|
|
xpp_startup
|
|
load_dynamic
|
|
genconf
|
|
# or find a way to reuse init.d start sequence.
|
|
|
|
# TODO: A local copy of Asterisk, configured with dahdi_gnconf.
|
|
# doable, but trickier.
|
|
run_asterisk
|
|
;;
|
|
genconf)
|
|
genconf
|
|
;;
|
|
asterisk)
|
|
run_asterisk
|
|
;;
|
|
reload)
|
|
$0 unload
|
|
$0 load
|
|
;;
|
|
exec)
|
|
if [ $# -lt 2 ]; then
|
|
# No command given: start a subshell in the environemnt
|
|
# of the "live" system:
|
|
echo >&2 "$0: Error: exec requires a command to run"
|
|
exit 1
|
|
fi
|
|
|
|
# Command given: run it:
|
|
shift
|
|
"$@"
|
|
;;
|
|
xpp-firm)
|
|
# Still broken. Needs to be run several times.
|
|
# set XPP_HOTPLUG_DISABLED=yes in /etc/dahdi/init.conf
|
|
XPP_FIRMWARE_DIR=$FIRMWARE_DIR \
|
|
"$FIRMWARE_DIR/xpp_fxloader" reset
|
|
sleep 5
|
|
XPP_FIRMWARE_DIR=$FIRMWARE_DIR \
|
|
"$FIRMWARE_DIR/xpp_fxloader" load
|
|
;;
|
|
help|'')
|
|
usage
|
|
;;
|
|
*)
|
|
echo >&2 "$0: Error: incorrect command \"$1\". Aborting"
|
|
usage
|
|
exit 1
|
|
esac
|