dahdi-linux/drivers/dahdi/voicebus/voicebus.c
Shaun Ruffell 6667f1c8d8 DAHDI in kernel 4.15: Switch to new timer_setup interface.
Upstream kernel 4.14, in commit (686fef928bba6b "timer: Prepare to change timer
callback argument type") [1], introduced the timer_setup interface to replace
the init_timer/setup_timer interfaces. The primary change is that the timer
callback functions now follow the standard kernel pattern where the structure
the callback sits in is passed to the callback instead of storing a pointer to
an unassociated data type.

The setup_timer functions were removed in upstream kernel v4.15, and therefore
this change is needed in order to compile DAHDI for kernels >= 4.15.

This change follows the same strategy that was done in the kernel to while the
existing users of setup_timer were migrated to the new interface.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=686fef928bba6b
2018-09-03 10:27:18 -05:00

2047 lines
52 KiB
C

/*
* VoiceBus(tm) Interface Library.
*
* Written by Shaun Ruffell <sruffell@digium.com>
* and based on previous work by Mark Spencer <markster@digium.com>,
* Matthew Fredrickson <creslin@digium.com>, and
* Michael Spiceland <mspiceland@digium.com>
*
* Copyright (C) 2007-2010 Digium, Inc.
*
* All rights reserved.
* VoiceBus is a registered trademark of Digium.
*
*/
/*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2 as published by the
* Free Software Foundation. See the LICENSE file included with
* this program for more details.
*/
#include <linux/version.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <dahdi/kernel.h>
#include "voicebus.h"
#include "voicebus_net.h"
#include "vpmadtreg.h"
#include "GpakCust.h"
#if VOICEBUS_DEFERRED == TIMER
#if HZ < 1000
/* \todo Put an error message here. */
#endif
#endif
/* Interrupt status' reported in SR_CSR5 */
#define TX_COMPLETE_INTERRUPT 0x00000001
#define TX_STOPPED_INTERRUPT 0x00000002
#define TX_UNAVAILABLE_INTERRUPT 0x00000004
#define TX_JABBER_TIMEOUT_INTERRUPT 0x00000008
#define TX_UNDERFLOW_INTERRUPT 0x00000020
#define RX_COMPLETE_INTERRUPT 0x00000040
#define RX_UNAVAILABLE_INTERRUPT 0x00000080
#define RX_STOPPED_INTERRUPT 0x00000100
#define RX_WATCHDOG_TIMEOUT_INTERRUPT 0x00000200
#define TIMER_INTERRUPT 0x00000800
#define FATAL_BUS_ERROR_INTERRUPT 0x00002000
#define ABNORMAL_INTERRUPT_SUMMARY 0x00008000
#define NORMAL_INTERRUPT_SUMMARY 0x00010000
#define SR_CSR5 0x0028
#define NAR_CSR6 0x0030
#define IER_CSR7 0x0038
#define CSR7_TCIE 0x00000001 /* tx complete */
#define CSR7_TPSIE 0x00000002 /* tx processor stopped */
#define CSR7_TDUIE 0x00000004 /* tx desc unavailable */
#define CSR7_TUIE 0x00000020 /* tx underflow */
#define CSR7_RCIE 0x00000040 /* rx complete */
#define CSR7_RUIE 0x00000080 /* rx desc unavailable */
#define CSR7_RSIE 0x00000100 /* rx processor stopped */
#define CSR7_FBEIE 0x00002000 /* fatal bus error */
#define CSR7_AIE 0x00008000 /* abnormal enable */
#define CSR7_NIE 0x00010000 /* normal enable */
#define DEFAULT_COMMON_INTERRUPTS (CSR7_TCIE|CSR7_TPSIE|CSR7_RUIE|CSR7_RSIE|\
CSR7_FBEIE|CSR7_AIE|CSR7_NIE)
#define DEFAULT_NORMAL_INTERRUPTS (DEFAULT_COMMON_INTERRUPTS|CSR7_TDUIE)
#define DEFAULT_NO_IDLE_INTERRUPTS (DEFAULT_COMMON_INTERRUPTS|CSR7_RCIE)
#define CSR9 0x0048
#define CSR9_MDC 0x00010000
#define CSR9_MDO 0x00020000
#define CSR9_MMC 0x00040000
#define CSR9_MDI 0x00080000
#define OWN_BIT cpu_to_le32(1 << 31)
#ifdef CONFIG_VOICEBUS_ECREFERENCE
/*
* These dahdi_fifo_xxx functions are currently only used by the voicebus
* drivers, but are named more generally to facilitate moving out in the
* future. They probably also could stand to be changed in order to use a
* kfifo implementation from the kernel if one is available.
*
*/
struct dahdi_fifo {
size_t total_size;
u32 start;
u32 end;
u8 data[0];
};
static unsigned int dahdi_fifo_used_space(struct dahdi_fifo *fifo)
{
return (fifo->end >= fifo->start) ? fifo->end - fifo->start :
fifo->total_size - fifo->start + fifo->end;
}
unsigned int __dahdi_fifo_put(struct dahdi_fifo *fifo, u8 *data, size_t size)
{
int newinsertposition;
int cpy_one_len, cpy_two_len;
if ((size + dahdi_fifo_used_space(fifo)) > (fifo->total_size - 1))
return -1;
if ((fifo->end + size) >= fifo->total_size) {
cpy_one_len = fifo->total_size - fifo->end;
cpy_two_len = fifo->end + size - fifo->total_size;
newinsertposition = cpy_two_len;
} else {
cpy_one_len = size;
cpy_two_len = 0;
newinsertposition = fifo->end + size;
}
memcpy(&fifo->data[fifo->end], data, cpy_one_len);
if (cpy_two_len)
memcpy(&fifo->data[0], &data[cpy_one_len], cpy_two_len);
fifo->end = newinsertposition;
return size;
}
EXPORT_SYMBOL(__dahdi_fifo_put);
unsigned int __dahdi_fifo_get(struct dahdi_fifo *fifo, u8 *data, size_t size)
{
int newbegin;
int cpy_one_len, cpy_two_len;
if (size > dahdi_fifo_used_space(fifo))
return 0;
if ((fifo->start + size) >= fifo->total_size) {
cpy_one_len = fifo->total_size - fifo->start;
cpy_two_len = fifo->start + size - fifo->total_size;
newbegin = cpy_two_len;
} else {
cpy_one_len = size;
cpy_two_len = 0;
newbegin = fifo->start + size;
}
memcpy(&data[0], &fifo->data[fifo->start], cpy_one_len);
if (cpy_two_len)
memcpy(&data[cpy_one_len], &fifo->data[0], cpy_two_len);
fifo->start = newbegin;
return size;
}
EXPORT_SYMBOL(__dahdi_fifo_get);
void dahdi_fifo_free(struct dahdi_fifo *fifo)
{
kfree(fifo);
}
EXPORT_SYMBOL(dahdi_fifo_free);
struct dahdi_fifo *dahdi_fifo_alloc(u32 maxsize, gfp_t alloc_flags)
{
struct dahdi_fifo *fifo;
fifo = kmalloc(maxsize + sizeof(*fifo) + 1, alloc_flags);
if (!fifo)
return NULL;
fifo->start = fifo->end = 0;
fifo->total_size = maxsize + 1;
return fifo;
}
EXPORT_SYMBOL(dahdi_fifo_alloc);
#endif /* CONFIG_VOICEBUS_ECREFERENCE */
/* In memory structure shared by the host and the adapter. */
struct voicebus_descriptor {
volatile __le32 des0;
volatile __le32 des1;
volatile __le32 buffer1;
volatile __le32 container; /* Unused */
} __attribute__((packed));
static inline void
handle_transmit(struct voicebus *vb, struct list_head *buffers)
{
vb->ops->handle_transmit(vb, buffers);
}
static inline void
handle_receive(struct voicebus *vb, struct list_head *buffers)
{
vb->ops->handle_receive(vb, buffers);
}
static inline struct voicebus_descriptor *
vb_descriptor(const struct voicebus_descriptor_list *dl,
const unsigned int index)
{
struct voicebus_descriptor *d;
d = (struct voicebus_descriptor *)((u8*)dl->desc +
((sizeof(*d) + dl->padding) * index));
return d;
}
static int
vb_initialize_descriptors(struct voicebus *vb, struct voicebus_descriptor_list *dl,
u32 des1, unsigned int direction)
{
int i;
struct voicebus_descriptor *d;
const u32 END_OF_RING = 0x02000000;
u8 cacheline_size;
BUG_ON(!dl);
/*
* Add some padding to each descriptor to ensure that they are
* aligned on host system cache-line boundaries, but only for the
* cache-line sizes that we support.
*
*/
if (pci_read_config_byte(vb->pdev, PCI_CACHE_LINE_SIZE,
&cacheline_size)) {
dev_err(&vb->pdev->dev, "Failed read of cache line "
"size from PCI configuration space.\n");
return -EIO;
}
if ((0x08 == cacheline_size) || (0x10 == cacheline_size) ||
(0x20 == cacheline_size)) {
dl->padding = (cacheline_size*sizeof(u32)) - sizeof(*d);
} else {
dl->padding = 0;
}
dl->desc = pci_alloc_consistent(vb->pdev,
(sizeof(*d) + dl->padding) * DRING_SIZE, &dl->desc_dma);
if (!dl->desc)
return -ENOMEM;
memset(dl->desc, 0, (sizeof(*d) + dl->padding) * DRING_SIZE);
for (i = 0; i < DRING_SIZE; ++i) {
d = vb_descriptor(dl, i);
d->des1 = cpu_to_le32(des1);
}
d->des1 |= cpu_to_le32(END_OF_RING);
dl->count = 0;
return 0;
}
#define OWNED(_d_) (((_d_)->des0)&OWN_BIT)
#define SET_OWNED(_d_) do { wmb(); (_d_)->des0 |= OWN_BIT; wmb(); } while (0)
static int
vb_initialize_tx_descriptors(struct voicebus *vb)
{
int i;
int des1 = 0xe4800000 | VOICEBUS_SFRAME_SIZE;
struct voicebus_descriptor *d;
struct voicebus_descriptor_list *dl = &vb->txd;
const u32 END_OF_RING = 0x02000000;
u8 cacheline_size;
WARN_ON(!dl);
WARN_ON((NULL == vb->idle_vbb) || (0 == vb->idle_vbb_dma_addr));
/*
* Add some padding to each descriptor to ensure that they are
* aligned on host system cache-line boundaries, but only for the
* cache-line sizes that we support.
*
*/
if (pci_read_config_byte(vb->pdev, PCI_CACHE_LINE_SIZE,
&cacheline_size)) {
dev_err(&vb->pdev->dev, "Failed read of cache line "
"size from PCI configuration space.\n");
return -EIO;
}
if ((0x08 == cacheline_size) || (0x10 == cacheline_size) ||
(0x20 == cacheline_size)) {
dl->padding = (cacheline_size*sizeof(u32)) - sizeof(*d);
} else {
dl->padding = 0;
}
dl->desc = pci_alloc_consistent(vb->pdev,
(sizeof(*d) + dl->padding) *
DRING_SIZE, &dl->desc_dma);
if (!dl->desc)
return -ENOMEM;
memset(dl->desc, 0, (sizeof(*d) + dl->padding) * DRING_SIZE);
for (i = 0; i < DRING_SIZE; ++i) {
d = vb_descriptor(dl, i);
d->des1 = cpu_to_le32(des1);
dl->pending[i] = NULL;
d->buffer1 = 0;
}
d->des1 |= cpu_to_le32(END_OF_RING);
dl->count = 0;
return 0;
}
static int
vb_initialize_rx_descriptors(struct voicebus *vb)
{
return vb_initialize_descriptors(
vb, &vb->rxd, VOICEBUS_SFRAME_SIZE, DMA_FROM_DEVICE);
}
/*! \brief Use to set the minimum number of buffers queued to the hardware
* before enabling interrupts.
*/
int
voicebus_set_minlatency(struct voicebus *vb, unsigned int ms)
{
unsigned long flags;
/*
* One millisecond of latency means that we have 3 buffers pending,
* since two are always going to be waiting in the TX fifo on the
* interface chip.
*
*/
#define MESSAGE "%d ms is an invalid value for minumum latency. Setting to %d ms.\n"
if (DRING_SIZE < ms) {
dev_warn(&vb->pdev->dev, MESSAGE, ms, DRING_SIZE);
return -EINVAL;
} else if (VOICEBUS_DEFAULT_LATENCY > ms) {
dev_warn(&vb->pdev->dev, MESSAGE, ms, VOICEBUS_DEFAULT_LATENCY);
return -EINVAL;
}
spin_lock_irqsave(&vb->lock, flags);
vb->min_tx_buffer_count = ms;
spin_unlock_irqrestore(&vb->lock, flags);
return 0;
}
EXPORT_SYMBOL(voicebus_set_minlatency);
/*! \brief Returns the number of buffers currently on the transmit queue. */
int
voicebus_current_latency(struct voicebus *vb)
{
int latency;
unsigned long flags;
spin_lock_irqsave(&vb->lock, flags);
latency = vb->min_tx_buffer_count;
spin_unlock_irqrestore(&vb->lock, flags);
return latency;
}
EXPORT_SYMBOL(voicebus_current_latency);
/*!
* \brief Read one of the hardware control registers without acquiring locks.
*/
static inline u32
__vb_getctl(struct voicebus *vb, u32 addr)
{
u32 ret;
ret = readl(vb->iobase + addr);
rmb();
return ret;
}
/*!
* \brief Read one of the hardware control registers with locks held.
*/
static inline u32
vb_getctl(struct voicebus *vb, u32 addr)
{
unsigned long flags;
u32 val;
spin_lock_irqsave(&vb->lock, flags);
val = __vb_getctl(vb, addr);
spin_unlock_irqrestore(&vb->lock, flags);
return val;
}
static int
__vb_is_stopped(struct voicebus *vb)
{
u32 reg;
reg = __vb_getctl(vb, SR_CSR5);
reg = (reg >> 17) & 0x3f;
return ((0 == reg) || (3 == reg)) ? 1 : 0;
}
/*!
* \brief Returns whether or not the interface is running.
*
* NOTE: Running in this case means whether or not the hardware reports the
* transmit processor in any state but stopped.
*
* \return 1 of the process is stopped, 0 if running.
*/
static int
vb_is_stopped(struct voicebus *vb)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&vb->lock, flags);
ret = __vb_is_stopped(vb);
spin_unlock_irqrestore(&vb->lock, flags);
return ret;
}
#if defined(CONFIG_VOICEBUS_INTERRUPT)
static inline void vb_disable_deferred(struct voicebus *vb)
{
if (atomic_inc_return(&vb->deferred_disabled_count) == 1)
disable_irq(vb->pdev->irq);
}
static inline void vb_enable_deferred(struct voicebus *vb)
{
if (atomic_dec_return(&vb->deferred_disabled_count) == 0)
enable_irq(vb->pdev->irq);
}
#else
static inline void vb_disable_deferred(struct voicebus *vb)
{
tasklet_disable(&vb->tasklet);
}
static inline void vb_enable_deferred(struct voicebus *vb)
{
tasklet_enable(&vb-tasklet);
}
#endif
static void
vb_cleanup_tx_descriptors(struct voicebus *vb)
{
unsigned int i;
struct voicebus_descriptor_list *dl = &vb->txd;
struct voicebus_descriptor *d;
struct vbb *vbb;
vb_disable_deferred(vb);
while (!list_empty(&vb->tx_complete)) {
vbb = list_entry(vb->tx_complete.next, struct vbb, entry);
list_del(&vbb->entry);
dma_pool_free(vb->pool, vbb, vbb->dma_addr);
}
for (i = 0; i < DRING_SIZE; ++i) {
d = vb_descriptor(dl, i);
if (d->buffer1 &&
(d->buffer1 != le32_to_cpu(vb->idle_vbb_dma_addr))) {
WARN_ON(!dl->pending[i]);
vbb = dl->pending[i];
dma_pool_free(vb->pool, vbb, vbb->dma_addr);
}
if (NORMAL == vb->mode) {
d->des1 |= cpu_to_le32(0x80000000);
d->buffer1 = cpu_to_le32(vb->idle_vbb_dma_addr);
dl->pending[i] = vb->idle_vbb;
SET_OWNED(d);
} else {
d->buffer1 = 0;
dl->pending[i] = NULL;
d->des0 &= ~OWN_BIT;
}
}
dl->head = dl->tail = 0;
dl->count = 0;
vb_enable_deferred(vb);
}
static void vb_cleanup_rx_descriptors(struct voicebus *vb)
{
unsigned int i;
struct voicebus_descriptor_list *dl = &vb->rxd;
struct voicebus_descriptor *d;
struct vbb *vbb;
vb_disable_deferred(vb);
for (i = 0; i < DRING_SIZE; ++i) {
d = vb_descriptor(dl, i);
if (d->buffer1) {
d->buffer1 = 0;
BUG_ON(!dl->pending[i]);
vbb = dl->pending[i];
list_add_tail(&vbb->entry, &vb->free_rx);
dl->pending[i] = NULL;
}
d->des0 &= ~OWN_BIT;
}
dl->head = 0;
dl->tail = 0;
dl->count = 0;
vb_enable_deferred(vb);
}
static void vb_cleanup_descriptors(struct voicebus *vb,
struct voicebus_descriptor_list *dl)
{
if (dl == &vb->txd)
vb_cleanup_tx_descriptors(vb);
else
vb_cleanup_rx_descriptors(vb);
}
static void
vb_free_descriptors(struct voicebus *vb, struct voicebus_descriptor_list *dl)
{
struct vbb *vbb;
if (NULL == dl->desc) {
WARN_ON(1);
return;
}
vb_cleanup_descriptors(vb, dl);
pci_free_consistent(
vb->pdev,
(sizeof(struct voicebus_descriptor)+dl->padding)*DRING_SIZE,
dl->desc, dl->desc_dma);
while (!list_empty(&vb->free_rx)) {
vbb = list_entry(vb->free_rx.next, struct vbb, entry);
list_del(&vbb->entry);
dma_pool_free(vb->pool, vbb, vbb->dma_addr);
}
}
/*!
* \brief Write one of the hardware control registers without acquiring locks.
*/
static inline void
__vb_setctl(struct voicebus *vb, u32 addr, u32 val)
{
wmb();
writel(val, vb->iobase + addr);
readl(vb->iobase + addr);
}
/*!
* \brief Write one of the hardware control registers with locks held.
*/
static inline void
vb_setctl(struct voicebus *vb, u32 addr, u32 val)
{
unsigned long flags;
spin_lock_irqsave(&vb->lock, flags);
__vb_setctl(vb, addr, val);
spin_unlock_irqrestore(&vb->lock, flags);
}
static int
__vb_sdi_clk(struct voicebus *vb, u32 *sdi)
{
unsigned int ret;
*sdi &= ~CSR9_MDC;
__vb_setctl(vb, 0x0048, *sdi);
ret = __vb_getctl(vb, 0x0048);
*sdi |= CSR9_MDC;
__vb_setctl(vb, 0x0048, *sdi);
return (ret & CSR9_MDI) ? 1 : 0;
}
static void
__vb_sdi_sendbits(struct voicebus *vb, u32 bits, int count, u32 *sdi)
{
*sdi &= ~CSR9_MMC;
__vb_setctl(vb, 0x0048, *sdi);
while (count--) {
if (bits & (1 << count))
*sdi |= CSR9_MDO;
else
*sdi &= ~CSR9_MDO;
__vb_sdi_clk(vb, sdi);
}
}
static void
vb_setsdi(struct voicebus *vb, int addr, u16 val)
{
u32 bits;
u32 sdi = 0;
unsigned long flags;
/* Send preamble */
bits = 0xffffffff;
spin_lock_irqsave(&vb->lock, flags);
__vb_sdi_sendbits(vb, bits, 32, &sdi);
bits = (0x5 << 12) | (1 << 7) | (addr << 2) | 0x2;
__vb_sdi_sendbits(vb, bits, 16, &sdi);
__vb_sdi_sendbits(vb, val, 16, &sdi);
spin_unlock_irqrestore(&vb->lock, flags);
}
/*! \brief Resets the voicebus hardware interface. */
static int
vb_reset_interface(struct voicebus *vb)
{
unsigned long timeout;
u32 reg;
u32 pci_access;
enum {
/* Software Reset */
SWR = (1 << 0),
/* Bus Arbitration (1 for priority transmit) */
BAR = (1 << 1),
/* Memory Write Invalidate */
MWI = (1 << 24),
/* Memory Read Line */
MRL = (1 << 23),
/* Descriptor Skip Length */
DSLShift = 2,
/* Cache Alignment */
CALShift = 14,
/* Transmit Auto Pollling */
TAPShift = 17,
};
const u32 DEFAULT_PCI_ACCESS = MWI | MRL | (0x2 << TAPShift) | BAR;
u8 cacheline_size;
BUG_ON(in_interrupt());
if (pci_read_config_byte(vb->pdev, PCI_CACHE_LINE_SIZE,
&cacheline_size)) {
dev_err(&vb->pdev->dev, "Failed read of cache line "
"size from PCI configuration space.\n");
return -EIO;
}
switch (cacheline_size) {
case 0x08:
pci_access = DEFAULT_PCI_ACCESS | (0x1 << CALShift);
break;
case 0x10:
pci_access = DEFAULT_PCI_ACCESS | (0x2 << CALShift);
break;
case 0x20:
pci_access = DEFAULT_PCI_ACCESS | (0x3 << CALShift);
break;
default:
if (*vb->debug) {
dev_warn(&vb->pdev->dev, "Host system set a cache "
"size of %d which is not supported. "
"Disabling memory write line and memory "
"read line.\n", cacheline_size);
}
pci_access = 0xfe584202;
break;
}
/* The transmit and receive descriptors will have the same padding. */
pci_access |= ((vb->txd.padding / sizeof(u32)) << DSLShift) & 0x7c;
vb_setctl(vb, 0x0000, pci_access | SWR);
timeout = jiffies + HZ/10; /* 100ms interval */
do {
reg = vb_getctl(vb, 0x0000);
} while ((reg & SWR) && time_before(jiffies, timeout));
if (reg & SWR) {
if (-1 == reg) {
dev_err(&vb->pdev->dev,
"Unable to read I/O registers.\n");
} else {
dev_err(&vb->pdev->dev, "Did not come out of reset "
"within 100ms\n");
}
return -EIO;
}
vb_setctl(vb, 0x0000, pci_access);
return 0;
}
/*!
* \brief Give a frame to the hardware to use for receiving.
*
*/
static inline int
vb_submit_rxb(struct voicebus *vb, struct vbb *vbb)
{
struct voicebus_descriptor *d;
struct voicebus_descriptor_list *dl = &vb->rxd;
unsigned int tail = dl->tail;
d = vb_descriptor(dl, tail);
if (unlikely(d->buffer1)) {
/* Do not overwrite a buffer that is still in progress. */
WARN_ON(1);
list_add_tail(&vbb->entry, &vb->free_rx);
return -EBUSY;
}
dl->pending[tail] = vbb;
dl->tail = (++tail) & DRING_MASK;
d->buffer1 = cpu_to_le32(vbb->dma_addr);
SET_OWNED(d); /* That's it until the hardware is done with it. */
++dl->count;
return 0;
}
static int __voicebus_transmit(struct voicebus *vb, struct vbb *vbb)
{
struct voicebus_descriptor *d;
struct voicebus_descriptor_list *dl = &vb->txd;
d = vb_descriptor(dl, dl->tail);
if (unlikely((le32_to_cpu(d->buffer1) != vb->idle_vbb_dma_addr) &&
d->buffer1)) {
if (printk_ratelimit())
dev_warn(&vb->pdev->dev, "Dropping tx buffer buffer\n");
dma_pool_free(vb->pool, vbb, vbb->dma_addr);
/* Schedule the underrun handler to run here, since we'll need
* to cleanup as best we can. */
schedule_work(&vb->underrun_work);
return -EFAULT;
}
dl->pending[dl->tail] = vbb;
d->buffer1 = cpu_to_le32(vbb->dma_addr);
dl->tail = (dl->tail + 1) & DRING_MASK;
SET_OWNED(d); /* That's it until the hardware is done with it. */
++dl->count;
return 0;
}
/**
* voicebus_transmit - Queue a buffer on the hardware descriptor ring.
*
*/
int voicebus_transmit(struct voicebus *vb, struct vbb *vbb)
{
int res = __voicebus_transmit(vb, vbb);
__vb_setctl(vb, 0x0008, 0x00000000);
return res;
}
EXPORT_SYMBOL(voicebus_transmit);
/*!
* \brief Instruct the hardware to check for a new tx descriptor.
*/
static inline void
__vb_tx_demand_poll(struct voicebus *vb)
{
u32 status = __vb_getctl(vb, 0x0028);
if ((status & 0x00700000) == 0x00600000)
__vb_setctl(vb, 0x0008, 0x00000000);
}
static void setup_descriptors(struct voicebus *vb)
{
int i;
struct vbb *vbb;
dma_addr_t dma_addr;
LIST_HEAD(buffers);
unsigned long flags;
might_sleep();
vb_cleanup_tx_descriptors(vb);
vb_cleanup_rx_descriptors(vb);
/* Tell the card where the descriptors are in host memory. */
vb_setctl(vb, 0x0020, (u32)vb->txd.desc_dma);
vb_setctl(vb, 0x0018, (u32)vb->rxd.desc_dma);
for (i = 0; i < DRING_SIZE; ++i) {
if (list_empty(&vb->free_rx)) {
vbb = dma_pool_alloc(vb->pool, GFP_KERNEL,
&dma_addr);
if (vbb)
vbb->dma_addr = dma_addr;
} else {
vbb = list_entry(vb->free_rx.next, struct vbb, entry);
list_del(&vbb->entry);
}
if (unlikely(NULL == vbb))
BUG_ON(1);
list_add_tail(&vbb->entry, &buffers);
}
vb_disable_deferred(vb);
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del(&vbb->entry);
vb_submit_rxb(vb, vbb);
}
vb_enable_deferred(vb);
if (BOOT != vb->mode) {
for (i = 0; i < vb->min_tx_buffer_count; ++i) {
vbb = dma_pool_alloc(vb->pool, GFP_KERNEL,
&dma_addr);
if (unlikely(NULL == vbb))
BUG_ON(1);
vbb->dma_addr = dma_addr;
list_add_tail(&vbb->entry, &buffers);
}
local_irq_save(flags);
handle_transmit(vb, &buffers);
local_irq_restore(flags);
vb_disable_deferred(vb);
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del_init(&vbb->entry);
__voicebus_transmit(vb, vbb);
}
__vb_setctl(vb, 0x0008, 0x00000000);
vb_enable_deferred(vb);
}
}
static void
__vb_set_control_defaults(struct voicebus *vb)
{
/* Pass bad packets, runt packets, disable SQE function,
* store-and-forward */
vb_setctl(vb, 0x0030, 0x00280048);
/* ...disable jabber and the receive watchdog. */
vb_setctl(vb, 0x0078, 0x00000013);
vb_getctl(vb, 0x0078);
}
static void __vb_set_mac_only_mode(struct voicebus *vb)
{
u32 reg;
reg = __vb_getctl(vb, 0x00fc);
__vb_setctl(vb, 0x00fc, (reg & ~0x7) | 0x4);
__vb_getctl(vb, 0x00fc);
}
static int
vb_initialize_interface(struct voicebus *vb)
{
u32 reg;
setup_descriptors(vb);
__vb_set_control_defaults(vb);
reg = vb_getctl(vb, 0x00fc);
vb_setctl(vb, 0x00fc, (reg & ~0x7) | 0x7);
vb_setsdi(vb, 0x00, 0x0100);
vb_setsdi(vb, 0x16, 0x2100);
__vb_set_mac_only_mode(vb);
vb_setsdi(vb, 0x00, 0x0100);
vb_setsdi(vb, 0x16, 0x2100);
reg = vb_getctl(vb, 0x00fc);
/*
* The calls to setsdi above toggle the reset line of the CPLD. Wait
* here to give the CPLD time to stabilize after reset.
*/
msleep(10);
return ((reg&0x7) == 0x4) ? 0 : -EIO;
}
#ifdef DBG
static void
dump_descriptor(struct voicebus *vb, struct voicebus_descriptor *d)
{
VB_PRINTK(vb, DEBUG, "Displaying descriptor at address %08x\n", (unsigned int)d);
VB_PRINTK(vb, DEBUG, " des0: %08x\n", le32_to_cpu(d->des0));
VB_PRINTK(vb, DEBUG, " des1: %08x\n", le32_to_cpu(d->des1));
VB_PRINTK(vb, DEBUG, " buffer1: %08x\n", le32_to_cpu(d->buffer1));
VB_PRINTK(vb, DEBUG, " container: %08x\n", le32_to_cpu(d->container));
}
static void
show_buffer(struct voicebus *vb, struct vbb *vbb)
{
int x;
unsigned char *c;
c = vbb;
printk(KERN_DEBUG "Packet %d\n", count);
printk(KERN_DEBUG "");
for (x = 1; x <= VOICEBUS_SFRAME_SIZE; ++x) {
printk("%02x ", c[x]);
if (x % 16 == 0)
printk("\n");
}
printk(KERN_DEBUG "\n\n");
}
#endif
/*!
* \brief Remove the next completed transmit buffer (txb) from the tx
* descriptor ring.
*
* NOTE: This function doesn't need any locking because only one instance is
* ever running on the deferred processing routine and it only looks at
* the head pointer. The deferred routine should only ever be running
* on one processor at a time (no multithreaded workqueues allowed!)
*
* Context: Must be called from the voicebus deferred workqueue.
*
* \return Pointer to buffer, or NULL if not available.
*/
static void *
vb_get_completed_txb(struct voicebus *vb)
{
struct voicebus_descriptor_list *dl = &vb->txd;
struct voicebus_descriptor *d;
struct vbb *vbb;
unsigned int head = dl->head;
d = vb_descriptor(dl, head);
if (OWNED(d) || !d->buffer1 ||
(le32_to_cpu(d->buffer1) == vb->idle_vbb_dma_addr))
return NULL;
vbb = dl->pending[head];
if (NORMAL == vb->mode) {
d->buffer1 = cpu_to_le32(vb->idle_vbb_dma_addr);
dl->pending[head] = vb->idle_vbb;
SET_OWNED(d);
} else {
d->buffer1 = 0;
dl->pending[head] = NULL;
}
dl->head = (++head) & DRING_MASK;
--dl->count;
vb_net_capture_vbb(vb, vbb, 1, d->des0, d->container);
return vbb;
}
static void *
vb_get_completed_rxb(struct voicebus *vb, u32 *des0)
{
struct voicebus_descriptor *d;
struct voicebus_descriptor_list *dl = &vb->rxd;
unsigned int head = dl->head;
struct vbb *vbb;
d = vb_descriptor(dl, head);
if ((0 == d->buffer1) || OWNED(d))
return NULL;
vbb = dl->pending[head];
dl->head = (++head) & DRING_MASK;
d->buffer1 = 0;
--dl->count;
# ifdef VOICEBUS_NET_DEBUG
vb_net_capture_vbb(vb, vbb, 0, d->des0, d->container);
# endif
*des0 = le32_to_cpu(d->des0);
return vbb;
}
/*!
* \brief Command the hardware to check if it owns the next receive
* descriptor.
*/
static inline void
__vb_rx_demand_poll(struct voicebus *vb)
{
if (((__vb_getctl(vb, 0x0028) >> 17) & 0x7) == 0x4)
__vb_setctl(vb, 0x0010, 0x00000000);
}
#ifndef CONFIG_VOICEBUS_TIMER
static void
__vb_enable_interrupts(struct voicebus *vb)
{
if (BOOT == vb->mode)
__vb_setctl(vb, IER_CSR7, DEFAULT_NO_IDLE_INTERRUPTS);
else
__vb_setctl(vb, IER_CSR7, DEFAULT_NORMAL_INTERRUPTS);
}
#endif
static void
__vb_disable_interrupts(struct voicebus *vb)
{
__vb_setctl(vb, IER_CSR7, 0);
}
static void
vb_disable_interrupts(struct voicebus *vb)
{
unsigned long flags;
spin_lock_irqsave(&vb->lock, flags);
__vb_disable_interrupts(vb);
spin_unlock_irqrestore(&vb->lock, flags);
}
static void start_packet_processing(struct voicebus *vb)
{
u32 reg;
unsigned long flags;
spin_lock_irqsave(&vb->lock, flags);
clear_bit(VOICEBUS_STOP, &vb->flags);
clear_bit(VOICEBUS_STOPPED, &vb->flags);
#if defined(CONFIG_VOICEBUS_TIMER)
mod_timer(&vb->timer, jiffies + HZ/1000);
#else
/* Clear the interrupt status register. */
__vb_setctl(vb, SR_CSR5, 0xffffffff);
__vb_enable_interrupts(vb);
#endif
/* Start the transmit and receive processors. */
reg = __vb_getctl(vb, 0x0030);
__vb_setctl(vb, 0x0030, reg|0x00002002);
__vb_getctl(vb, 0x0030);
__vb_rx_demand_poll(vb);
__vb_tx_demand_poll(vb);
__vb_getctl(vb, 0x0030);
spin_unlock_irqrestore(&vb->lock, flags);
}
static void vb_tasklet_boot(unsigned long data);
static void vb_tasklet_hx8(unsigned long data);
static void vb_tasklet_normal(unsigned long data);
/*!
* \brief Starts the VoiceBus interface.
*
* When the VoiceBus interface is started, it is actively transferring
* frames to and from the backend of the card. This means the card will
* generate interrupts.
*
* This function should only be called from process context, with interrupts
* enabled, since it can sleep while running the self checks.
*
* \return zero on success. -EBUSY if device is already running.
*/
int
voicebus_start(struct voicebus *vb)
{
int ret;
if (!vb_is_stopped(vb))
return -EBUSY;
if (NORMAL == vb->mode) {
tasklet_init(&vb->tasklet, vb_tasklet_normal,
(unsigned long)vb);
} else if (BOOT == vb->mode) {
tasklet_init(&vb->tasklet, vb_tasklet_boot,
(unsigned long)vb);
} else if (HX8 == vb->mode) {
tasklet_init(&vb->tasklet, vb_tasklet_hx8,
(unsigned long)vb);
} else {
return -EINVAL;
}
ret = vb_reset_interface(vb);
if (ret)
return ret;
ret = vb_initialize_interface(vb);
if (ret)
return ret;
start_packet_processing(vb);
BUG_ON(vb_is_stopped(vb));
return 0;
}
EXPORT_SYMBOL(voicebus_start);
static void vb_stop_txrx_processors(struct voicebus *vb)
{
unsigned long flags;
u32 reg;
int i;
spin_lock_irqsave(&vb->lock, flags);
reg = __vb_getctl(vb, NAR_CSR6);
reg &= ~(0x2002);
__vb_setctl(vb, NAR_CSR6, reg);
spin_unlock_irqrestore(&vb->lock, flags);
barrier();
i = 150;
while (--i && (__vb_getctl(vb, SR_CSR5) & (0x007e0000)))
udelay(100);
}
/*!
* \brief Stops the VoiceBus interface.
*
* Stops the VoiceBus interface and waits for any outstanding DMA transactions
* to complete. When this functions returns the VoiceBus interface tx and rx
* states will both be suspended.
*
* Only call this function from process context, with interrupt enabled,
* without any locks held since it sleeps.
*
* \return zero on success, -1 on error.
*/
void voicebus_stop(struct voicebus *vb)
{
static DEFINE_SEMAPHORE(stop);
down(&stop);
if (test_bit(VOICEBUS_STOP, &vb->flags) || vb_is_stopped(vb)) {
up(&stop);
return;
}
set_bit(VOICEBUS_STOP, &vb->flags);
vb_stop_txrx_processors(vb);
WARN_ON(!vb_is_stopped(vb));
set_bit(VOICEBUS_STOPPED, &vb->flags);
#if defined(CONFIG_VOICEBUS_TIMER)
del_timer_sync(&vb->timer);
#endif
vb_disable_interrupts(vb);
up(&stop);
}
EXPORT_SYMBOL(voicebus_stop);
/**
* voicebus_quiesce - Halt the voicebus interface.
* @vb: The voicebus structure to quiet
*
* This ensures that the device is not engaged in any DMA transactions or
* interrupting. It does not grab any locks since it may be called by a dying
* kernel.
*/
void voicebus_quiesce(struct voicebus *vb)
{
if (!vb)
return;
/* Reset the device */
__vb_disable_interrupts(vb);
__vb_setctl(vb, 0x0000, 0x1);
__vb_getctl(vb, 0x0000);
}
EXPORT_SYMBOL(voicebus_quiesce);
/*!
* \brief Prepare the interface for module unload.
*
* Stop the interface and free all the resources allocated by the driver. The
* caller should have returned all VoiceBus buffers to the VoiceBus layer
* before calling this function.
*
* context: !in_interrupt()
*/
void
voicebus_release(struct voicebus *vb)
{
set_bit(VOICEBUS_SHUTDOWN, &vb->flags);
#ifdef VOICEBUS_NET_DEBUG
vb_net_unregister(vb);
#endif
/* Make sure the underrun_work isn't running or going to run. */
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 22)
flush_scheduled_work();
#else
cancel_work_sync(&vb->underrun_work);
#endif
/* quiesce the hardware */
voicebus_stop(vb);
vb_reset_interface(vb);
tasklet_kill(&vb->tasklet);
#if !defined(CONFIG_VOICEBUS_TIMER)
free_irq(vb->pdev->irq, vb);
#endif
/* Cleanup memory and software resources. */
vb_free_descriptors(vb, &vb->txd);
vb_free_descriptors(vb, &vb->rxd);
if (vb->idle_vbb_dma_addr) {
dma_free_coherent(&vb->pdev->dev, VOICEBUS_SFRAME_SIZE,
vb->idle_vbb, vb->idle_vbb_dma_addr);
}
release_mem_region(pci_resource_start(vb->pdev, 1),
pci_resource_len(vb->pdev, 1));
pci_iounmap(vb->pdev, vb->iobase);
pci_clear_mwi(vb->pdev);
pci_disable_device(vb->pdev);
dma_pool_destroy(vb->pool);
}
EXPORT_SYMBOL(voicebus_release);
static void
vb_increase_latency(struct voicebus *vb, unsigned int increase,
struct list_head *buffers)
{
struct vbb *vbb;
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 27)
struct vbb *n;
#endif
int i;
LIST_HEAD(local);
if (0 == increase)
return;
if (test_bit(VOICEBUS_LATENCY_LOCKED, &vb->flags))
return;
if (unlikely(increase > VOICEBUS_MAXLATENCY_BUMP))
increase = VOICEBUS_MAXLATENCY_BUMP;
if ((increase + vb->min_tx_buffer_count) > vb->max_latency)
increase = vb->max_latency - vb->min_tx_buffer_count;
/* Because there are 2 buffers in the transmit FIFO on the hardware,
* setting 3 ms of latency means that the host needs to be able to
* service the cards within 1ms. This is because the interface will
* load up 2 buffers into the TX FIFO then attempt to read the 3rd
* descriptor. If the OWN bit isn't set, then the hardware will set the
* TX descriptor not available interrupt. */
/* Set the minimum latency in case we're restarted...we don't want to
* wait for the buffer to grow to this depth again in that case. */
for (i = 0; i < increase; ++i) {
dma_addr_t dma_addr;
vbb = dma_pool_alloc(vb->pool, GFP_ATOMIC, &dma_addr);
WARN_ON(NULL == vbb);
if (likely(NULL != vbb)) {
vbb->dma_addr = dma_addr;
list_add_tail(&vbb->entry, &local);
}
}
handle_transmit(vb, &local);
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 27)
list_for_each_entry_safe(vbb, n, &local, entry)
list_move_tail(&vbb->entry, buffers);
#else
list_splice_tail(&local, buffers);
#endif
/* Set the new latency (but we want to ensure that there aren't any
* printks to the console, so we don't call the function) */
vb->min_tx_buffer_count += increase;
}
static void vb_schedule_deferred(struct voicebus *vb)
{
#if !defined(CONFIG_VOICEBUS_INTERRUPT)
tasklet_hi_schedule(&vb->tasklet);
#else
vb->tasklet.func(vb->tasklet.data);
#endif
}
/**
* vb_tasklet_boot() - When vb->mode == BOOT
*
* This deferred processing routine is for hx8 boards during initialization. It
* simply services any completed tx / rx packets without any concerns about what
* the current latency is.
*/
static void vb_tasklet_boot(unsigned long data)
{
struct voicebus *vb = (struct voicebus *)data;
LIST_HEAD(buffers);
struct vbb *vbb;
const int DEFAULT_COUNT = 5;
int count = DEFAULT_COUNT;
u32 des0 = 0;
/* First, temporarily store any non-idle buffers that the hardware has
* indicated it's finished transmitting. Non idle buffers are those
* buffers that contain actual data and was filled out by the client
* driver (as of this writing, the wcte12xp or wctdm24xxp drivers) when
* passed up through the handle_transmit callback.
*
* On the other hand, idle buffers are "dummy" buffers that solely exist
* to in order to prevent the transmit descriptor ring from ever
* completely draining. */
while ((vbb = vb_get_completed_txb(vb)))
list_add_tail(&vbb->entry, &vb->tx_complete);
while (--count && !list_empty(&vb->tx_complete))
list_move_tail(vb->tx_complete.next, &buffers);
/* Prep all the new buffers for transmit before actually sending any
* of them. */
handle_transmit(vb, &buffers);
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del(&vbb->entry);
__voicebus_transmit(vb, vbb);
}
__vb_setctl(vb, 0x0008, 0x00000000);
/* If there may still be buffers in the descriptor rings, reschedule
* ourself to run again. We essentially yield here to allow any other
* cards a chance to run. */
#if !defined(CONFIG_VOICEBUS_INTERRUPT)
if (unlikely(!count && !test_bit(VOICEBUS_STOP, &vb->flags)))
vb_schedule_deferred(vb);
#endif
/* And finally, pass up any receive buffers. */
count = DEFAULT_COUNT;
while (--count && (vbb = vb_get_completed_rxb(vb, &des0))) {
if (likely((des0 & (0x7fff << 16)) ==
(VOICEBUS_SFRAME_SIZE << 16)))
list_add_tail(&vbb->entry, &buffers);
else
vb_submit_rxb(vb, vbb);
}
handle_receive(vb, &buffers);
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del(&vbb->entry);
vb_submit_rxb(vb, vbb);
}
return;
}
/**
* vb_tasklet_hx8() - When vb->mode == HX8
*
* The normal deferred processing routine for the Hx8 boards. This deferred
* processing routine doesn't configure any idle buffers and increases the
* latency when there is a hard underrun. There are not any softunderruns here,
* unlike in vb_tasklet_normal.
*/
static void vb_tasklet_hx8(unsigned long data)
{
struct voicebus *vb = (struct voicebus *)data;
int hardunderrun;
LIST_HEAD(buffers);
struct vbb *vbb;
const int DEFAULT_COUNT = 5;
int count = DEFAULT_COUNT;
u32 des0 = 0;
hardunderrun = test_and_clear_bit(VOICEBUS_HARD_UNDERRUN, &vb->flags);
/* First, temporarily store any non-idle buffers that the hardware has
* indicated it's finished transmitting. Non idle buffers are those
* buffers that contain actual data and was filled out by the client
* driver (as of this writing, the wcte12xp or wctdm24xxp drivers) when
* passed up through the handle_transmit callback.
*
* On the other hand, idle buffers are "dummy" buffers that solely exist
* to in order to prevent the transmit descriptor ring from ever
* completely draining. */
while ((vbb = vb_get_completed_txb(vb)))
list_add_tail(&vbb->entry, &vb->tx_complete);
while (--count && !list_empty(&vb->tx_complete))
list_move_tail(vb->tx_complete.next, &buffers);
/* Prep all the new buffers for transmit before actually sending any
* of them. */
handle_transmit(vb, &buffers);
if (unlikely(hardunderrun))
vb_increase_latency(vb, 1, &buffers);
/* Now we can send all our buffers together in a group. */
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del(&vbb->entry);
__voicebus_transmit(vb, vbb);
}
__vb_setctl(vb, 0x0008, 0x00000000);
/* Print any messages about soft latency bumps after we fix the transmit
* descriptor ring. Otherwise it's possible to take so much time
* printing the dmesg output that we lose the lead that we got on the
* hardware, resulting in a hard underrun condition. */
if (unlikely(hardunderrun)) {
#if !defined(CONFIG_VOICEBUS_SYSFS)
if (!test_bit(VOICEBUS_LATENCY_LOCKED, &vb->flags) &&
printk_ratelimit()) {
if (vb->max_latency != vb->min_tx_buffer_count) {
dev_info(&vb->pdev->dev, "Missed interrupt. "
"Increasing latency to %d ms in "
"order to compensate.\n",
vb->min_tx_buffer_count);
} else {
dev_info(&vb->pdev->dev, "ERROR: Unable to "
"service card within %d ms and "
"unable to further increase "
"latency.\n", vb->max_latency);
}
}
#endif
}
#if !defined(CONFIG_VOICEBUS_INTERRUPT)
/* If there may still be buffers in the descriptor rings, reschedule
* ourself to run again. We essentially yield here to allow any other
* cards a chance to run. */
if (unlikely(!count && !test_bit(VOICEBUS_STOP, &vb->flags)))
vb_schedule_deferred(vb);
#endif
/* And finally, pass up any receive buffers. */
count = DEFAULT_COUNT;
while (--count && (vbb = vb_get_completed_rxb(vb, &des0))) {
if (((des0 >> 16) & 0x7fff) == VOICEBUS_SFRAME_SIZE)
list_add_tail(&vbb->entry, &buffers);
else
vb_submit_rxb(vb, vbb);
}
handle_receive(vb, &buffers);
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del(&vbb->entry);
vb_submit_rxb(vb, vbb);
}
return;
}
/**
* vb_tasklet_relaxed() - When vb->mode == NORMAL
*
* This is the standard deferred processing routine for CPLD based cards
* (essentially the non-hx8 cards).
*/
static void vb_tasklet_normal(unsigned long data)
{
struct voicebus *vb = (struct voicebus *)data;
int softunderrun;
LIST_HEAD(buffers);
struct vbb *vbb;
struct voicebus_descriptor_list *const dl = &vb->txd;
struct voicebus_descriptor *d;
int behind = 0;
const int DEFAULT_COUNT = 5;
int count = DEFAULT_COUNT;
u32 des0 = 0;
BUG_ON(NORMAL != vb->mode);
/* First, temporarily store any non-idle buffers that the hardware has
* indicated it's finished transmitting. Non idle buffers are those
* buffers that contain actual data and was filled out by the client
* driver (as of this writing, the wcte12xp or wctdm24xxp drivers) when
* passed up through the handle_transmit callback.
*
* On the other hand, idle buffers are "dummy" buffers that solely exist
* to in order to prevent the transmit descriptor ring from ever
* completely draining. */
while ((vbb = vb_get_completed_txb(vb)))
list_add_tail(&vbb->entry, &vb->tx_complete);
if (unlikely(dl->count < 2)) {
softunderrun = 1;
d = vb_descriptor(dl, dl->head);
if (1 == dl->count)
return;
behind = 2;
while (!OWNED(d)) {
if (le32_to_cpu(d->buffer1) != vb->idle_vbb_dma_addr)
goto tx_error_exit;
SET_OWNED(d);
dl->head = (dl->head + 1) & DRING_MASK;
d = vb_descriptor(dl, dl->head);
++behind;
}
} else {
softunderrun = 0;
}
while (--count && !list_empty(&vb->tx_complete))
list_move_tail(vb->tx_complete.next, &buffers);
/* Prep all the new buffers for transmit before actually sending any
* of them. */
handle_transmit(vb, &buffers);
if (unlikely(softunderrun)) {
int i;
unsigned long flags;
/* Disable interrupts on the local processor. We don't want
* the following process interrupted. We're 'racing' against
* the hardware here.... */
local_irq_save(flags);
vb_increase_latency(vb, behind, &buffers);
d = vb_descriptor(dl, dl->head);
while (!OWNED(d)) {
if (le32_to_cpu(d->buffer1) != vb->idle_vbb_dma_addr) {
local_irq_restore(flags);
goto tx_error_exit;
}
SET_OWNED(d);
dl->head = (dl->head + 1) & DRING_MASK;
d = vb_descriptor(dl, dl->head);
++behind;
}
/* Now we'll get a little further ahead of the hardware. */
for (i = 0; i < 5; ++i) {
d = vb_descriptor(dl, dl->head);
d->buffer1 = cpu_to_le32(vb->idle_vbb_dma_addr);
dl->pending[dl->head] = vb->idle_vbb;
d->des0 |= OWN_BIT;
dl->head = (dl->head + 1) & DRING_MASK;
}
dl->tail = dl->head;
local_irq_restore(flags);
}
d = vb_descriptor(dl, dl->tail);
if (le32_to_cpu(d->buffer1) != vb->idle_vbb_dma_addr)
goto tx_error_exit;
/* Now we can send all our buffers together in a group. */
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del(&vbb->entry);
__voicebus_transmit(vb, vbb);
}
writel(0, vb->iobase + 0x8);
/* Print any messages about soft latency bumps after we fix the transmit
* descriptor ring. Otherwise it's possible to take so much time
* printing the dmesg output that we lose the lead that we got on the
* hardware, resulting in a hard underrun condition. */
if (unlikely(softunderrun)) {
#if !defined(CONFIG_VOICEBUS_SYSFS)
if (!test_bit(VOICEBUS_LATENCY_LOCKED, &vb->flags) &&
printk_ratelimit()) {
if (vb->max_latency != vb->min_tx_buffer_count) {
dev_info(&vb->pdev->dev, "Missed interrupt. "
"Increasing latency to %d ms in "
"order to compensate.\n",
vb->min_tx_buffer_count);
} else {
dev_info(&vb->pdev->dev, "ERROR: Unable to "
"service card within %d ms and "
"unable to further increase "
"latency.\n", vb->max_latency);
}
}
#endif
}
#if !defined(CONFIG_VOICEBUS_INTERRUPT)
/* If there may still be buffers in the descriptor rings, reschedule
* ourself to run again. We essentially yield here to allow any other
* cards a chance to run. */
if (unlikely(!count && !test_bit(VOICEBUS_STOP, &vb->flags)))
vb_schedule_deferred(vb);
#endif
/* And finally, pass up any receive buffers. */
count = DEFAULT_COUNT;
while (--count && (vbb = vb_get_completed_rxb(vb, &des0))) {
if (((des0 >> 16) & 0x7fff) == VOICEBUS_SFRAME_SIZE)
list_add_tail(&vbb->entry, &buffers);
else
vb_submit_rxb(vb, vbb);
}
handle_receive(vb, &buffers);
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del(&vbb->entry);
vb_submit_rxb(vb, vbb);
}
return;
tx_error_exit:
vb_disable_interrupts(vb);
schedule_work(&vb->underrun_work);
while (!list_empty(&buffers)) {
vbb = list_entry(buffers.next, struct vbb, entry);
list_del(&vbb->entry);
dma_pool_free(vb->pool, vbb, vbb->dma_addr);
}
return;
}
/**
* handle_hardunderrun() - reset the AN983 after experiencing a hardunderrun.
* @work: The work_struct used to queue this function.
*
*/
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
static void handle_hardunderrun(void *data)
{
struct voicebus *vb = data;
#else
static void handle_hardunderrun(struct work_struct *work)
{
struct voicebus *vb = container_of(work, struct voicebus,
underrun_work);
#endif
if (test_bit(VOICEBUS_STOP, &vb->flags) ||
test_bit(VOICEBUS_STOPPED, &vb->flags))
return;
voicebus_stop(vb);
if (!test_bit(VOICEBUS_SHUTDOWN, &vb->flags)) {
if (printk_ratelimit()) {
dev_info(&vb->pdev->dev, "Host failed to service "
"card interrupt within %d ms which is a "
"hardunderun.\n", DRING_SIZE);
}
if (vb->ops->handle_error)
vb->ops->handle_error(vb);
vb_disable_deferred(vb);
setup_descriptors(vb);
start_packet_processing(vb);
vb_enable_deferred(vb);
}
}
/*!
* \brief Interrupt handler for VoiceBus interface.
*
* NOTE: This handler is optimized for the case where only a single interrupt
* condition will be generated at a time.
*
* ALSO NOTE: Only access the interrupt status register from this function
* since it doesn't employ any locking on the voicebus interface.
*/
static irqreturn_t
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
vb_isr(int irq, void *dev_id, struct pt_regs *regs)
#else
vb_isr(int irq, void *dev_id)
#endif
{
struct voicebus *vb = dev_id;
unsigned long flags;
u32 int_status;
int_status = __vb_getctl(vb, SR_CSR5);
/* Mask out the reserved bits. */
int_status &= ~(0xfc004010);
int_status &= 0x7fff;
if (!int_status)
return IRQ_NONE;
local_irq_save(flags);
if (unlikely((int_status &
(TX_UNAVAILABLE_INTERRUPT|RX_UNAVAILABLE_INTERRUPT)) &&
!test_bit(VOICEBUS_STOP, &vb->flags) &&
(BOOT != vb->mode))) {
if (NORMAL == vb->mode) {
__vb_disable_interrupts(vb);
__vb_setctl(vb, SR_CSR5, int_status);
schedule_work(&vb->underrun_work);
} else if (HX8 == vb->mode) {
set_bit(VOICEBUS_HARD_UNDERRUN, &vb->flags);
vb_schedule_deferred(vb);
__vb_setctl(vb, SR_CSR5, int_status);
}
} else if (likely(int_status &
(TX_COMPLETE_INTERRUPT|RX_COMPLETE_INTERRUPT))) {
/* ******************************************************** */
/* NORMAL INTERRUPT CASE */
/* ******************************************************** */
vb_schedule_deferred(vb);
__vb_setctl(vb, SR_CSR5, TX_COMPLETE_INTERRUPT|RX_COMPLETE_INTERRUPT);
} else {
if (int_status & FATAL_BUS_ERROR_INTERRUPT)
dev_err(&vb->pdev->dev, "Fatal Bus Error detected!\n");
if (int_status & TX_STOPPED_INTERRUPT) {
BUG_ON(!test_bit(VOICEBUS_STOP, &vb->flags));
if (__vb_is_stopped(vb)) {
__vb_disable_interrupts(vb);
}
}
if (int_status & RX_STOPPED_INTERRUPT) {
BUG_ON(!test_bit(VOICEBUS_STOP, &vb->flags));
if (__vb_is_stopped(vb)) {
__vb_disable_interrupts(vb);
}
}
/* Clear the interrupt(s) */
__vb_setctl(vb, SR_CSR5, int_status);
}
local_irq_restore(flags);
return IRQ_HANDLED;
}
#if defined(CONFIG_VOICEBUS_TIMER)
/*! \brief Called if the deferred processing is to happen in the context of
* the timer.
*/
static void
vb_timer(TIMER_DATA_TYPE timer)
{
unsigned long start = jiffies;
struct voicebus *vb = from_timer(vb, timer, timer);
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
vb_isr(0, vb, 0);
#else
vb_isr(0, vb);
#endif
if (!test_bit(VOICEBUS_STOPPED, &vb->flags)) {
mod_timer(&vb->timer, start + HZ/1000);
}
}
#endif
/*!
* \brief Initalize the voicebus interface.
*
* This function must be called in process context since it may sleep.
* \todo Complete this description.
*/
int
__voicebus_init(struct voicebus *vb, const char *board_name,
enum voicebus_mode mode)
{
int retval = 0;
int reserved_iomem = 0;
BUG_ON(NULL == vb);
BUG_ON(NULL == board_name);
BUG_ON(NULL == vb->ops);
BUG_ON(NULL == vb->pdev);
BUG_ON(NULL == vb->debug);
/* ----------------------------------------------------------------
Initialize the pure software constructs.
---------------------------------------------------------------- */
vb->max_latency = VOICEBUS_DEFAULT_MAXLATENCY;
spin_lock_init(&vb->lock);
set_bit(VOICEBUS_STOP, &vb->flags);
if ((NORMAL != mode) && (BOOT != mode) && (HX8 != mode))
return -EINVAL;
vb->mode = mode;
vb->min_tx_buffer_count = VOICEBUS_DEFAULT_LATENCY;
INIT_LIST_HEAD(&vb->tx_complete);
INIT_LIST_HEAD(&vb->free_rx);
#if defined(CONFIG_VOICEBUS_TIMER)
timer_setup(&vb->timer, vb_timer, 0);
#endif
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
INIT_WORK(&vb->underrun_work, handle_hardunderrun, vb);
#else
INIT_WORK(&vb->underrun_work, handle_hardunderrun);
#endif
/* ----------------------------------------------------------------
Configure the hardware / kernel module interfaces.
---------------------------------------------------------------- */
if (pci_set_dma_mask(vb->pdev, DMA_BIT_MASK(32))) {
dev_err(&vb->pdev->dev, "No suitable DMA available.\n");
goto cleanup;
}
if (pci_enable_device(vb->pdev)) {
dev_err(&vb->pdev->dev, "Failed call to pci_enable_device.\n");
retval = -EIO;
goto cleanup;
}
if (0 == (pci_resource_flags(vb->pdev, 0)&IORESOURCE_IO)) {
dev_err(&vb->pdev->dev, "BAR0 is not IO Memory.\n");
retval = -EIO;
goto cleanup;
}
vb->iobase = pci_iomap(vb->pdev, 1, 0);
if (request_mem_region(pci_resource_start(vb->pdev, 1),
pci_resource_len(vb->pdev, 1),
board_name)) {
reserved_iomem = 1;
} else {
dev_err(&vb->pdev->dev, "IO Registers are in use by another "
"module.\n");
if (!(*vb->debug)) {
retval = -EIO;
goto cleanup;
}
}
vb->pool = dma_pool_create(board_name, &vb->pdev->dev,
sizeof(struct vbb), 64, 0);
if (!vb->pool) {
retval = -ENOMEM;
goto cleanup;
}
vb->idle_vbb = dma_alloc_coherent(&vb->pdev->dev, VOICEBUS_SFRAME_SIZE,
&vb->idle_vbb_dma_addr, GFP_KERNEL);
/* ----------------------------------------------------------------
Configure the hardware interface.
---------------------------------------------------------------- */
if (pci_set_dma_mask(vb->pdev, DMA_BIT_MASK(32))) {
dev_warn(&vb->pdev->dev, "No suitable DMA available.\n");
goto cleanup;
}
retval = pci_set_mwi(vb->pdev);
if (retval) {
dev_warn(&vb->pdev->dev, "Failed to set Memory-Write " \
"Invalidate Command Bit..\n");
}
pci_set_master(vb->pdev);
if (vb_reset_interface(vb)) {
retval = -EIO;
dev_warn(&vb->pdev->dev, "Failed reset.\n");
goto cleanup;
}
retval = vb_initialize_tx_descriptors(vb);
if (retval)
goto cleanup;
retval = vb_initialize_rx_descriptors(vb);
if (retval)
goto cleanup;
#if !defined(CONFIG_VOICEBUS_TIMER)
retval = request_irq(vb->pdev->irq, vb_isr, IRQF_SHARED,
board_name, vb);
if (retval) {
dev_warn(&vb->pdev->dev, "Failed to request interrupt line.\n");
goto cleanup;
}
#endif
#ifdef VOICEBUS_NET_DEBUG
vb_net_register(vb, board_name);
#endif
return retval;
cleanup:
tasklet_kill(&vb->tasklet);
if (vb->pool)
dma_pool_destroy(vb->pool);
/* Cleanup memory and software resources. */
if (vb->txd.desc)
vb_free_descriptors(vb, &vb->txd);
if (vb->rxd.desc)
vb_free_descriptors(vb, &vb->rxd);
dma_free_coherent(&vb->pdev->dev, VOICEBUS_SFRAME_SIZE,
vb->idle_vbb, vb->idle_vbb_dma_addr);
if (vb->iobase)
pci_iounmap(vb->pdev, vb->iobase);
if (vb->pdev)
pci_disable_device(vb->pdev);
if (reserved_iomem) {
release_mem_region(pci_resource_start(vb->pdev, 1),
pci_resource_len(vb->pdev, 1));
}
if (0 == retval)
retval = -EIO;
return retval;
}
EXPORT_SYMBOL(__voicebus_init);
static spinlock_t loader_list_lock;
static LIST_HEAD(binary_loader_list);
/**
* vpmadtreg_loadfirmware - Load the vpmadt032 firmware.
* @vb: The voicebus device to load.
*/
int vpmadtreg_loadfirmware(struct voicebus *vb)
{
struct vpmadt_loader *loader;
int ret = 0;
int loader_present = 0;
unsigned long stop;
might_sleep();
/* First check to see if a loader is already loaded into memory. */
spin_lock(&loader_list_lock);
loader_present = !(list_empty(&binary_loader_list));
spin_unlock(&loader_list_lock);
if (!loader_present) {
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 30)
ret = request_module("dahdi_vpmadt032_loader");
#else
/* If we use the blocking 'request_module' here and we are
* loading the client boards with async_schedule we will hang
* here. The module loader will wait for our asynchronous tasks
* to finish, but we can't because we're waiting for the load
* the finish. */
ret = request_module_nowait("dahdi_vpmadt032_loader");
#endif
if (ret)
return ret;
stop = jiffies + HZ;
while (time_after(stop, jiffies)) {
spin_lock(&loader_list_lock);
loader_present = !(list_empty(&binary_loader_list));
spin_unlock(&loader_list_lock);
if (loader_present)
break;
msleep(10);
}
}
spin_lock(&loader_list_lock);
if (!list_empty(&binary_loader_list)) {
loader = list_entry(binary_loader_list.next,
struct vpmadt_loader, node);
if (try_module_get(loader->owner)) {
spin_unlock(&loader_list_lock);
ret = loader->load(vb);
module_put(loader->owner);
} else {
spin_unlock(&loader_list_lock);
dev_info(&vb->pdev->dev, "Failed to find a "
"registered loader after loading module.\n");
ret = -ENODEV;
}
} else {
spin_unlock(&loader_list_lock);
dev_info(&vb->pdev->dev, "Failed to find a registered "
"loader after loading module.\n");
ret = -ENODEV;
}
return ret;
}
/* Called by the binary loader module when it is ready to start loading
* firmware. */
int vpmadtreg_register(struct vpmadt_loader *loader)
{
spin_lock(&loader_list_lock);
list_add_tail(&loader->node, &binary_loader_list);
spin_unlock(&loader_list_lock);
return 0;
}
EXPORT_SYMBOL(vpmadtreg_register);
int vpmadtreg_unregister(struct vpmadt_loader *loader)
{
int removed = 0;
struct vpmadt_loader *cur, *temp;
list_for_each_entry_safe(cur, temp, &binary_loader_list, node) {
if (loader == cur) {
list_del_init(&cur->node);
removed = 1;
break;
}
}
WARN_ON(!removed);
return 0;
}
EXPORT_SYMBOL(vpmadtreg_unregister);
static int __init voicebus_module_init(void)
{
/* This registration with dahdi.ko will fail since the span is not
* defined, but it will make sure that this module is a dependency of
* dahdi.ko, so that when it is being unloded, this module will be
* unloaded as well. */
dahdi_register_device(NULL, NULL);
spin_lock_init(&loader_list_lock);
return 0;
}
static void __exit voicebus_module_cleanup(void)
{
WARN_ON(!list_empty(&binary_loader_list));
}
MODULE_DESCRIPTION("Voicebus Interface w/VPMADT032 support");
MODULE_AUTHOR("Digium Incorporated <support@digium.com>");
MODULE_LICENSE("GPL");
module_init(voicebus_module_init);
module_exit(voicebus_module_cleanup);