dahdi-linux/drivers/dahdi/xpp/firmwares
Tzafrir Cohen 41ae90a8a3 xpp: Firmware for Astribanks 2.02
Astribank 2.02: a newer model: slight variation of 2.01 (both use E-Main
4). Uses the same USB firmware, has to use a different FPGA firmware as
newer devices cannot be made to work with older 2.01 firmware.

FPGA rev. 11307.

Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
2013-10-21 16:51:30 +03:00
..
FPGA_1141.hex Astribank I firmwares rev. 7107 2012-01-25 18:34:43 +00:00
FPGA_1151.hex Astribank I firmwares rev. 7107 2012-01-25 18:34:43 +00:00
FPGA_1161.201.hex FPGA_1161.201.hex rev 10545: fix reset of XR1000 2012-04-11 09:06:29 +00:00
FPGA_1161.202.hex xpp: Firmware for Astribanks 2.02 2013-10-21 16:51:30 +03:00
FPGA_1161.hex xpp: firmware to detect the new 2+6 module 2011-09-05 09:51:55 +00:00
FPGA_FXS.hex Astribank I firmwares rev. 7107 2012-01-25 18:34:43 +00:00
LICENSE.firmware wct4xxp: Moving the transmit short detection behind debug module param. 2010-08-27 21:59:27 +00:00
Makefile xpp: also install the new .201 fixrmware files 2012-03-18 15:35:11 +00:00
PIC_TYPE_1.hex xpp: PIC_TYPE_1 rev 9841: followup to r10013 2011-11-13 13:23:10 +00:00
PIC_TYPE_2.hex xpp: FXO: fix firmware pol-rev detection 2013-05-23 14:50:31 +03:00
PIC_TYPE_3.hex wct4xxp: Moving the transmit short detection behind debug module param. 2010-08-27 21:59:27 +00:00
PIC_TYPE_4.hex wct4xxp: Moving the transmit short detection behind debug module param. 2010-08-27 21:59:27 +00:00
README wct4xxp: Moving the transmit short detection behind debug module param. 2010-08-27 21:59:27 +00:00
USB_FW.201.hex xpp: firmwares to support E-Main 4 2012-03-18 14:49:58 +00:00
USB_FW.202.hex xpp: Firmware for Astribanks 2.02 2013-10-21 16:51:30 +03:00
USB_FW.hex xpp: firmwares: useless 0x1A at EOF 2012-03-20 10:53:39 +00:00
USB_RECOV.hex xpp: firmwares: useless 0x1A at EOF 2012-03-20 10:53:39 +00:00

This distribution includes the firmware files required by the Xorcom[tm] 
Astribank[tm]. 

This distribution inlcudes just the firmware files. Be sure to use a 
zaptel distribution/package of a matching version.

INSTALLATION
""""""""""""
run "make install" as root. (which will simply copy all the *.hex files 
to /usr/share/zaptel )

USAGE
"""""
When the firmware files are in place everything should work 
automagically. Consult the xpp documentation included in the package 
zaptel (or the debian package zaptel) that you use for further information.


For further information contact support@xorcom.com       http://xorcom.com