1331610048
* Caller to CALL_XMETHOD() no longer need to explicitly pass xbus (calculate xpd->xbus) * Create CALL_PHONE_METHOD() similar to CALL_XMETHOD() -- inlining the extra parameters (more readable) * Reverse parameter order in PHONE_METHOD() and CALL_PHONE_METHOD() to be consistent with XMETHOD() and CALL_XMETHOD() * Rename XPD_STATE phonedev method to card_state: - Consistency with other phonedev methods. - These calls now Wrap internal calls to XPD_STATE protocol HOSTCMD in PRI, BRI, FXS, FXO Signed-off-by: Oron Peled <oron@actcom.co.il> Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com> git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9706 a0bf4364-ded3-4de4-8d8a-66a801d63aff
1438 lines
39 KiB
C
1438 lines
39 KiB
C
/*
|
|
* Written by Oron Peled <oron@actcom.co.il>
|
|
* Copyright (C) 2004-2006, Xorcom
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/delay.h>
|
|
#include "xpd.h"
|
|
#include "xproto.h"
|
|
#include "xpp_dahdi.h"
|
|
#include "card_fxo.h"
|
|
#include "dahdi_debug.h"
|
|
#include "xbus-core.h"
|
|
|
|
static const char rcsid[] = "$Id$";
|
|
|
|
static DEF_PARM(int, debug, 0, 0644, "Print DBG statements");
|
|
static DEF_PARM(uint, poll_battery_interval, 500, 0644, "Poll battery interval in milliseconds (0 - disable)");
|
|
#ifdef WITH_METERING
|
|
static DEF_PARM(uint, poll_metering_interval, 500, 0644, "Poll metering interval in milliseconds (0 - disable)");
|
|
#endif
|
|
static DEF_PARM(int, ring_debounce, 50, 0644, "Number of ticks to debounce a false RING indication");
|
|
static DEF_PARM(int, caller_id_style, 0, 0444, "Caller-Id detection style: 0 - [BELL], 1 - [ETSI_FSK], 2 - [ETSI_DTMF]");
|
|
static DEF_PARM(int, power_denial_safezone, 650, 0644, "msec after offhook to ignore power-denial ( (0 - disable power-denial)");
|
|
static DEF_PARM(int, power_denial_minlen, 80, 0644, "Minimal detected power-denial length (msec) (0 - disable power-denial)");
|
|
static DEF_PARM(uint, battery_threshold, 3, 0644, "Minimum voltage that shows there is battery");
|
|
static DEF_PARM(uint, battery_debounce, 1000, 0644, "Minimum interval (msec) for detection of battery off");
|
|
|
|
enum cid_style {
|
|
CID_STYLE_BELL = 0, /* E.g: US (Bellcore) */
|
|
CID_STYLE_ETSI_FSK = 1, /* E.g: UK (British Telecom) */
|
|
CID_STYLE_ETSI_DTMF = 2, /* E.g: DK, Russia */
|
|
};
|
|
|
|
/* Signaling is opposite (fxs signalling for fxo card) */
|
|
#if 1
|
|
#define FXO_DEFAULT_SIGCAP (DAHDI_SIG_FXSKS | DAHDI_SIG_FXSLS)
|
|
#else
|
|
#define FXO_DEFAULT_SIGCAP (DAHDI_SIG_SF)
|
|
#endif
|
|
|
|
enum fxo_leds {
|
|
LED_GREEN,
|
|
LED_RED,
|
|
};
|
|
|
|
#define NUM_LEDS 2
|
|
#define DELAY_UNTIL_DIALTONE 3000
|
|
|
|
/*
|
|
* Minimum duration for polarity reversal detection (in ticks)
|
|
* Should be longer than the time to detect a ring, so voltage
|
|
* fluctuation during ring won't trigger false detection.
|
|
*/
|
|
#define POLREV_THRESHOLD 200
|
|
#define POWER_DENIAL_CURRENT 3
|
|
#define POWER_DENIAL_DELAY 2500 /* ticks */
|
|
|
|
/* Shortcuts */
|
|
#define DAA_WRITE 1
|
|
#define DAA_READ 0
|
|
#define DAA_DIRECT_REQUEST(xbus,xpd,port,writing,reg,dL) \
|
|
xpp_register_request((xbus), (xpd), (port), (writing), (reg), 0, 0, (dL), 0, 0, 0)
|
|
|
|
/*---------------- FXO Protocol Commands ----------------------------------*/
|
|
|
|
static /* 0x0F */ DECLARE_CMD(FXO, XPD_STATE, bool on);
|
|
|
|
static bool fxo_packet_is_valid(xpacket_t *pack);
|
|
static void fxo_packet_dump(const char *msg, xpacket_t *pack);
|
|
#ifdef CONFIG_PROC_FS
|
|
static int proc_fxo_info_read(char *page, char **start, off_t off, int count, int *eof, void *data);
|
|
#ifdef WITH_METERING
|
|
static int proc_xpd_metering_read(char *page, char **start, off_t off, int count, int *eof, void *data);
|
|
#endif
|
|
#endif
|
|
static void dahdi_report_battery(xpd_t *xpd, lineno_t chan);
|
|
|
|
#define PROC_REGISTER_FNAME "slics"
|
|
#define PROC_FXO_INFO_FNAME "fxo_info"
|
|
#ifdef WITH_METERING
|
|
#define PROC_METERING_FNAME "metering_read"
|
|
#endif
|
|
|
|
#define REG_DAA_CONTROL1 0x05 /* 5 - DAA Control 1 */
|
|
#define REG_DAA_CONTROL1_OH BIT(0) /* Off-Hook. */
|
|
#define REG_DAA_CONTROL1_ONHM BIT(3) /* On-Hook Line Monitor */
|
|
|
|
#define DAA_REG_METERING 0x11 /* 17 */
|
|
#define DAA_REG_CURRENT 0x1C /* 28 */
|
|
#define DAA_REG_VBAT 0x1D /* 29 */
|
|
|
|
enum battery_state {
|
|
BATTERY_UNKNOWN = 0,
|
|
BATTERY_ON = 1,
|
|
BATTERY_OFF = -1
|
|
};
|
|
|
|
enum polarity_state {
|
|
POL_UNKNOWN = 0,
|
|
POL_POSITIVE = 1,
|
|
POL_NEGATIVE = -1
|
|
};
|
|
|
|
enum power_state {
|
|
POWER_UNKNOWN = 0,
|
|
POWER_ON = 1,
|
|
POWER_OFF = -1
|
|
};
|
|
|
|
struct FXO_priv_data {
|
|
#ifdef WITH_METERING
|
|
struct proc_dir_entry *meteringfile;
|
|
#endif
|
|
struct proc_dir_entry *fxo_info;
|
|
uint poll_counter;
|
|
signed char battery_voltage[CHANNELS_PERXPD];
|
|
signed char battery_current[CHANNELS_PERXPD];
|
|
enum battery_state battery[CHANNELS_PERXPD];
|
|
ushort nobattery_debounce[CHANNELS_PERXPD];
|
|
enum polarity_state polarity[CHANNELS_PERXPD];
|
|
ushort polarity_debounce[CHANNELS_PERXPD];
|
|
enum power_state power[CHANNELS_PERXPD];
|
|
ushort power_denial_delay[CHANNELS_PERXPD];
|
|
ushort power_denial_length[CHANNELS_PERXPD];
|
|
ushort power_denial_safezone[CHANNELS_PERXPD];
|
|
xpp_line_t cidfound; /* 0 - OFF, 1 - ON */
|
|
unsigned int cidtimer[CHANNELS_PERXPD];
|
|
xpp_line_t ledstate[NUM_LEDS]; /* 0 - OFF, 1 - ON */
|
|
xpp_line_t ledcontrol[NUM_LEDS]; /* 0 - OFF, 1 - ON */
|
|
int led_counter[NUM_LEDS][CHANNELS_PERXPD];
|
|
atomic_t ring_debounce[CHANNELS_PERXPD];
|
|
#ifdef WITH_METERING
|
|
uint metering_count[CHANNELS_PERXPD];
|
|
xpp_line_t metering_tone_state;
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* LED counter values:
|
|
* n>1 : BLINK every n'th tick
|
|
*/
|
|
#define LED_COUNTER(priv,pos,color) ((priv)->led_counter[color][pos])
|
|
#define IS_BLINKING(priv,pos,color) (LED_COUNTER(priv,pos,color) > 0)
|
|
#define MARK_BLINK(priv,pos,color,t) ((priv)->led_counter[color][pos] = (t))
|
|
#define MARK_OFF(priv,pos,color) do { BIT_CLR((priv)->ledcontrol[color],(pos)); MARK_BLINK((priv),(pos),(color),0); } while(0)
|
|
#define MARK_ON(priv,pos,color) do { BIT_SET((priv)->ledcontrol[color],(pos)); MARK_BLINK((priv),(pos),(color),0); } while(0)
|
|
|
|
#define LED_BLINK_RING (1000/8) /* in ticks */
|
|
|
|
/*---------------- FXO: Static functions ----------------------------------*/
|
|
|
|
static const char *power2str(enum power_state pw)
|
|
{
|
|
switch(pw) {
|
|
case POWER_UNKNOWN: return "UNKNOWN";
|
|
case POWER_OFF: return "OFF";
|
|
case POWER_ON: return "ON";
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void power_change(xpd_t *xpd, int portno, enum power_state pw)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
priv = xpd->priv;
|
|
LINE_DBG(SIGNAL, xpd, portno, "power: %s -> %s\n",
|
|
power2str(priv->power[portno]),
|
|
power2str(pw));
|
|
priv->power[portno] = pw;
|
|
}
|
|
|
|
static void reset_battery_readings(xpd_t *xpd, lineno_t pos)
|
|
{
|
|
struct FXO_priv_data *priv = xpd->priv;
|
|
|
|
priv->nobattery_debounce[pos] = 0;
|
|
priv->power_denial_delay[pos] = 0;
|
|
power_change(xpd, pos, POWER_UNKNOWN);
|
|
}
|
|
|
|
static const int led_register_mask[] = { BIT(7), BIT(6), BIT(5) };
|
|
|
|
/*
|
|
* LED control is done via DAA register 0x20
|
|
*/
|
|
static int do_led(xpd_t *xpd, lineno_t chan, byte which, bool on)
|
|
{
|
|
int ret = 0;
|
|
struct FXO_priv_data *priv;
|
|
xbus_t *xbus;
|
|
byte value;
|
|
|
|
BUG_ON(!xpd);
|
|
xbus = xpd->xbus;
|
|
priv = xpd->priv;
|
|
which = which % NUM_LEDS;
|
|
if(IS_SET(PHONEDEV(xpd).digital_outputs, chan) || IS_SET(PHONEDEV(xpd).digital_inputs, chan))
|
|
goto out;
|
|
if(chan == PORT_BROADCAST) {
|
|
priv->ledstate[which] = (on) ? ~0 : 0;
|
|
} else {
|
|
if(on) {
|
|
BIT_SET(priv->ledstate[which], chan);
|
|
} else {
|
|
BIT_CLR(priv->ledstate[which], chan);
|
|
}
|
|
}
|
|
value = 0;
|
|
value |= ((BIT(5) | BIT(6) | BIT(7)) & ~led_register_mask[which]);
|
|
value |= (on) ? BIT(0) : 0;
|
|
value |= (on) ? BIT(1) : 0;
|
|
LINE_DBG(LEDS, xpd, chan, "LED: which=%d -- %s\n", which, (on) ? "on" : "off");
|
|
ret = DAA_DIRECT_REQUEST(xbus, xpd, chan, DAA_WRITE, 0x20, value);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void handle_fxo_leds(xpd_t *xpd)
|
|
{
|
|
int i;
|
|
unsigned long flags;
|
|
const enum fxo_leds colors[] = { LED_GREEN, LED_RED };
|
|
enum fxo_leds color;
|
|
unsigned int timer_count;
|
|
struct FXO_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
spin_lock_irqsave(&xpd->lock, flags);
|
|
priv = xpd->priv;
|
|
timer_count = xpd->timer_count;
|
|
for(color = 0; color < ARRAY_SIZE(colors); color++) {
|
|
for_each_line(xpd, i) {
|
|
if(IS_SET(PHONEDEV(xpd).digital_outputs, i) || IS_SET(PHONEDEV(xpd).digital_inputs, i))
|
|
continue;
|
|
if((xpd->blink_mode & BIT(i)) || IS_BLINKING(priv, i, color)) { // Blinking
|
|
int mod_value = LED_COUNTER(priv, i, color);
|
|
|
|
if(!mod_value)
|
|
mod_value = DEFAULT_LED_PERIOD; /* safety value */
|
|
// led state is toggled
|
|
if((timer_count % mod_value) == 0) {
|
|
LINE_DBG(LEDS, xpd, i, "ledstate=%s\n", (IS_SET(priv->ledstate[color], i))?"ON":"OFF");
|
|
if(!IS_SET(priv->ledstate[color], i)) {
|
|
do_led(xpd, i, color, 1);
|
|
} else {
|
|
do_led(xpd, i, color, 0);
|
|
}
|
|
}
|
|
} else if(IS_SET(priv->ledcontrol[color], i) && !IS_SET(priv->ledstate[color], i)) {
|
|
do_led(xpd, i, color, 1);
|
|
} else if(!IS_SET(priv->ledcontrol[color], i) && IS_SET(priv->ledstate[color], i)) {
|
|
do_led(xpd, i, color, 0);
|
|
}
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&xpd->lock, flags);
|
|
}
|
|
|
|
static void update_dahdi_ring(xpd_t *xpd, int pos, bool on)
|
|
{
|
|
BUG_ON(!xpd);
|
|
if(caller_id_style == CID_STYLE_BELL)
|
|
oht_pcm(xpd, pos, !on);
|
|
/*
|
|
* We should not spinlock before calling dahdi_hooksig() as
|
|
* it may call back into our xpp_hooksig() and cause
|
|
* a nested spinlock scenario
|
|
*/
|
|
notify_rxsig(xpd, pos, (on) ? DAHDI_RXSIG_RING : DAHDI_RXSIG_OFFHOOK);
|
|
}
|
|
|
|
static void mark_ring(xpd_t *xpd, lineno_t pos, bool on, bool update_dahdi)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
atomic_set(&priv->ring_debounce[pos], 0); /* Stop debouncing */
|
|
/*
|
|
* We don't want to check battery during ringing
|
|
* due to voltage fluctuations.
|
|
*/
|
|
reset_battery_readings(xpd, pos);
|
|
if(on && !PHONEDEV(xpd).ringing[pos]) {
|
|
LINE_DBG(SIGNAL, xpd, pos, "START\n");
|
|
PHONEDEV(xpd).ringing[pos] = 1;
|
|
priv->cidtimer[pos] = xpd->timer_count;
|
|
MARK_BLINK(priv, pos, LED_GREEN, LED_BLINK_RING);
|
|
if(update_dahdi)
|
|
update_dahdi_ring(xpd, pos, on);
|
|
} else if(!on && PHONEDEV(xpd).ringing[pos]) {
|
|
LINE_DBG(SIGNAL, xpd, pos, "STOP\n");
|
|
PHONEDEV(xpd).ringing[pos] = 0;
|
|
priv->cidtimer[pos] = xpd->timer_count;
|
|
if(IS_BLINKING(priv, pos, LED_GREEN))
|
|
MARK_BLINK(priv, pos, LED_GREEN, 0);
|
|
if(update_dahdi)
|
|
update_dahdi_ring(xpd, pos, on);
|
|
}
|
|
}
|
|
|
|
static int do_sethook(xpd_t *xpd, int pos, bool to_offhook)
|
|
{
|
|
unsigned long flags;
|
|
xbus_t *xbus;
|
|
struct FXO_priv_data *priv;
|
|
int ret = 0;
|
|
byte value;
|
|
|
|
BUG_ON(!xpd);
|
|
BUG_ON(PHONEDEV(xpd).direction == TO_PHONE); // We can SETHOOK state only on PSTN
|
|
xbus = xpd->xbus;
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(priv->battery[pos] != BATTERY_ON && to_offhook) {
|
|
LINE_NOTICE(xpd, pos, "Cannot take offhook while battery is off!\n");
|
|
return -EINVAL;
|
|
}
|
|
spin_lock_irqsave(&xpd->lock, flags);
|
|
mark_ring(xpd, pos, 0, 0); // No more rings
|
|
value = REG_DAA_CONTROL1_ONHM; /* Bit 3 is for CID */
|
|
if(to_offhook)
|
|
value |= REG_DAA_CONTROL1_OH;
|
|
LINE_DBG(SIGNAL, xpd, pos, "SETHOOK: value=0x%02X %s\n", value, (to_offhook)?"OFFHOOK":"ONHOOK");
|
|
if(to_offhook)
|
|
MARK_ON(priv, pos, LED_GREEN);
|
|
else
|
|
MARK_OFF(priv, pos, LED_GREEN);
|
|
ret = DAA_DIRECT_REQUEST(xbus, xpd, pos, DAA_WRITE, REG_DAA_CONTROL1, value);
|
|
mark_offhook(xpd, pos, to_offhook);
|
|
if(caller_id_style != CID_STYLE_ETSI_DTMF)
|
|
oht_pcm(xpd, pos, 0);
|
|
#ifdef WITH_METERING
|
|
priv->metering_count[pos] = 0;
|
|
priv->metering_tone_state = 0L;
|
|
DAA_DIRECT_REQUEST(xbus, xpd, pos, DAA_WRITE, DAA_REG_METERING, 0x2D);
|
|
#endif
|
|
reset_battery_readings(xpd, pos); /* unstable during hook changes */
|
|
if(to_offhook) {
|
|
priv->power_denial_safezone[pos] = power_denial_safezone;
|
|
} else {
|
|
priv->power_denial_length[pos] = 0;
|
|
priv->power_denial_safezone[pos] = 0;
|
|
}
|
|
priv->cidtimer[pos] = xpd->timer_count;
|
|
spin_unlock_irqrestore(&xpd->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
/*---------------- FXO: Methods -------------------------------------------*/
|
|
|
|
static void fxo_proc_remove(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
XPD_DBG(PROC, xpd, "\n");
|
|
#ifdef CONFIG_PROC_FS
|
|
#ifdef WITH_METERING
|
|
if(priv->meteringfile) {
|
|
XPD_DBG(PROC, xpd, "Removing xpd metering tone file\n");
|
|
priv->meteringfile->data = NULL;
|
|
remove_proc_entry(PROC_METERING_FNAME, xpd->proc_xpd_dir);
|
|
priv->meteringfile = NULL;
|
|
}
|
|
#endif
|
|
if(priv->fxo_info) {
|
|
XPD_DBG(PROC, xpd, "Removing xpd FXO_INFO file\n");
|
|
remove_proc_entry(PROC_FXO_INFO_FNAME, xpd->proc_xpd_dir);
|
|
priv->fxo_info = NULL;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static int fxo_proc_create(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
#ifdef CONFIG_PROC_FS
|
|
XPD_DBG(PROC, xpd, "Creating FXO_INFO file\n");
|
|
priv->fxo_info = create_proc_read_entry(PROC_FXO_INFO_FNAME, 0444, xpd->proc_xpd_dir, proc_fxo_info_read, xpd);
|
|
if(!priv->fxo_info) {
|
|
XPD_ERR(xpd, "Failed to create proc file '%s'\n", PROC_FXO_INFO_FNAME);
|
|
fxo_proc_remove(xbus, xpd);
|
|
return -EINVAL;
|
|
}
|
|
SET_PROC_DIRENTRY_OWNER(priv->fxo_info);
|
|
#ifdef WITH_METERING
|
|
XPD_DBG(PROC, xpd, "Creating Metering tone file\n");
|
|
priv->meteringfile = create_proc_read_entry(PROC_METERING_FNAME, 0444, xpd->proc_xpd_dir,
|
|
proc_xpd_metering_read, xpd);
|
|
if(!priv->meteringfile) {
|
|
XPD_ERR(xpd, "Failed to create proc file '%s'\n", PROC_METERING_FNAME);
|
|
fxo_proc_remove(xbus, xpd);
|
|
return -EINVAL;
|
|
}
|
|
SET_PROC_DIRENTRY_OWNER(priv->meteringfile);
|
|
#endif
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static xpd_t *FXO_card_new(xbus_t *xbus, int unit, int subunit, const xproto_table_t *proto_table,
|
|
byte subtype, int subunits, int subunit_ports, bool to_phone)
|
|
{
|
|
xpd_t *xpd = NULL;
|
|
int channels;
|
|
|
|
if(to_phone) {
|
|
XBUS_NOTICE(xbus,
|
|
"XPD=%d%d: try to instanciate FXO with reverse direction\n",
|
|
unit, subunit);
|
|
return NULL;
|
|
}
|
|
if(subtype == 2)
|
|
channels = min(2, subunit_ports);
|
|
else
|
|
channels = min(8, subunit_ports);
|
|
xpd = xpd_alloc(xbus, unit, subunit, subtype, subunits, sizeof(struct FXO_priv_data), proto_table, channels);
|
|
if(!xpd)
|
|
return NULL;
|
|
PHONEDEV(xpd).direction = TO_PSTN;
|
|
xpd->type_name = "FXO";
|
|
if(fxo_proc_create(xbus, xpd) < 0)
|
|
goto err;
|
|
return xpd;
|
|
err:
|
|
xpd_free(xpd);
|
|
return NULL;
|
|
}
|
|
|
|
static int FXO_card_init(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
int i;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
// Hanghup all lines
|
|
for_each_line(xpd, i) {
|
|
do_sethook(xpd, i, 0);
|
|
priv->polarity[i] = POL_UNKNOWN; /* will be updated on next battery sample */
|
|
priv->polarity_debounce[i] = 0;
|
|
priv->battery[i] = BATTERY_UNKNOWN; /* will be updated on next battery sample */
|
|
priv->power[i] = POWER_UNKNOWN; /* will be updated on next battery sample */
|
|
if(caller_id_style == CID_STYLE_ETSI_DTMF)
|
|
oht_pcm(xpd, i, 1);
|
|
}
|
|
XPD_DBG(GENERAL, xpd, "done\n");
|
|
for_each_line(xpd, i) {
|
|
do_led(xpd, i, LED_GREEN, 0);
|
|
}
|
|
for_each_line(xpd, i) {
|
|
do_led(xpd, i, LED_GREEN, 1);
|
|
msleep(50);
|
|
}
|
|
for_each_line(xpd, i) {
|
|
do_led(xpd, i, LED_GREEN, 0);
|
|
msleep(50);
|
|
}
|
|
CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int FXO_card_remove(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
XPD_DBG(GENERAL, xpd, "\n");
|
|
fxo_proc_remove(xbus, xpd);
|
|
return 0;
|
|
}
|
|
|
|
static int FXO_card_dahdi_preregistration(xpd_t *xpd, bool on)
|
|
{
|
|
xbus_t *xbus;
|
|
struct FXO_priv_data *priv;
|
|
int i;
|
|
unsigned int timer_count;
|
|
|
|
BUG_ON(!xpd);
|
|
xbus = xpd->xbus;
|
|
BUG_ON(!xbus);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
timer_count = xpd->timer_count;
|
|
XPD_DBG(GENERAL, xpd, "%s\n", (on)?"ON":"OFF");
|
|
PHONEDEV(xpd).span.spantype = "FXO";
|
|
for_each_line(xpd, i) {
|
|
struct dahdi_chan *cur_chan = XPD_CHAN(xpd, i);
|
|
|
|
XPD_DBG(GENERAL, xpd, "setting FXO channel %d\n", i);
|
|
snprintf(cur_chan->name, MAX_CHANNAME, "XPP_FXO/%02d/%1d%1d/%d",
|
|
xbus->num, xpd->addr.unit, xpd->addr.subunit, i);
|
|
cur_chan->chanpos = i + 1;
|
|
cur_chan->pvt = xpd;
|
|
cur_chan->sigcap = FXO_DEFAULT_SIGCAP;
|
|
}
|
|
for_each_line(xpd, i) {
|
|
MARK_ON(priv, i, LED_GREEN);
|
|
msleep(4);
|
|
MARK_ON(priv, i, LED_RED);
|
|
}
|
|
for_each_line(xpd, i) {
|
|
priv->cidtimer[i] = timer_count;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int FXO_card_dahdi_postregistration(xpd_t *xpd, bool on)
|
|
{
|
|
xbus_t *xbus;
|
|
struct FXO_priv_data *priv;
|
|
int i;
|
|
|
|
BUG_ON(!xpd);
|
|
xbus = xpd->xbus;
|
|
BUG_ON(!xbus);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
XPD_DBG(GENERAL, xpd, "%s\n", (on)?"ON":"OFF");
|
|
for_each_line(xpd, i) {
|
|
dahdi_report_battery(xpd, i);
|
|
MARK_OFF(priv, i, LED_GREEN);
|
|
msleep(2);
|
|
MARK_OFF(priv, i, LED_RED);
|
|
msleep(2);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int FXO_card_hooksig(xpd_t *xpd, int pos, enum dahdi_txsig txsig)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
int ret = 0;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
LINE_DBG(SIGNAL, xpd, pos, "%s\n", txsig2str(txsig));
|
|
BUG_ON(PHONEDEV(xpd).direction != TO_PSTN);
|
|
/* XXX Enable hooksig for FXO XXX */
|
|
switch(txsig) {
|
|
case DAHDI_TXSIG_START:
|
|
case DAHDI_TXSIG_OFFHOOK:
|
|
ret = do_sethook(xpd, pos, 1);
|
|
break;
|
|
case DAHDI_TXSIG_ONHOOK:
|
|
ret = do_sethook(xpd, pos, 0);
|
|
break;
|
|
default:
|
|
XPD_NOTICE(xpd, "Can't set tx state to %s (%d)\n",
|
|
txsig2str(txsig), txsig);
|
|
return -EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void dahdi_report_battery(xpd_t *xpd, lineno_t chan)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
if(SPAN_REGISTERED(xpd)) {
|
|
switch(priv->battery[chan]) {
|
|
case BATTERY_UNKNOWN:
|
|
/* no-op */
|
|
break;
|
|
case BATTERY_OFF:
|
|
LINE_DBG(SIGNAL, xpd, chan, "Send DAHDI_ALARM_RED\n");
|
|
dahdi_alarm_channel(XPD_CHAN(xpd, chan), DAHDI_ALARM_RED);
|
|
break;
|
|
case BATTERY_ON:
|
|
LINE_DBG(SIGNAL, xpd, chan, "Send DAHDI_ALARM_NONE\n");
|
|
dahdi_alarm_channel(XPD_CHAN(xpd, chan), DAHDI_ALARM_NONE);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int FXO_card_open(xpd_t *xpd, lineno_t chan)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
return 0;
|
|
}
|
|
|
|
static void poll_battery(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
int i;
|
|
|
|
for_each_line(xpd, i) {
|
|
DAA_DIRECT_REQUEST(xbus, xpd, i, DAA_READ, DAA_REG_VBAT, 0);
|
|
}
|
|
}
|
|
|
|
#ifdef WITH_METERING
|
|
static void poll_metering(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
int i;
|
|
|
|
for_each_line(xpd, i) {
|
|
if (IS_OFFHOOK(xpd, i))
|
|
DAA_DIRECT_REQUEST(xbus, xpd, i, DAA_READ, DAA_REG_METERING, 0);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void handle_fxo_ring(xpd_t *xpd)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
int i;
|
|
|
|
priv = xpd->priv;
|
|
for_each_line(xpd, i) {
|
|
if(atomic_read(&priv->ring_debounce[i]) > 0) {
|
|
/* Maybe start ring */
|
|
if(atomic_dec_and_test(&priv->ring_debounce[i]))
|
|
mark_ring(xpd, i, 1, 1);
|
|
} else if (atomic_read(&priv->ring_debounce[i]) < 0) {
|
|
/* Maybe stop ring */
|
|
if(atomic_inc_and_test(&priv->ring_debounce[i]))
|
|
mark_ring(xpd, i, 0, 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void handle_fxo_power_denial(xpd_t *xpd)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
int i;
|
|
|
|
if(!power_denial_safezone)
|
|
return; /* Ignore power denials */
|
|
priv = xpd->priv;
|
|
for_each_line(xpd, i) {
|
|
if(PHONEDEV(xpd).ringing[i] || !IS_OFFHOOK(xpd, i)) {
|
|
priv->power_denial_delay[i] = 0;
|
|
continue;
|
|
}
|
|
if(priv->power_denial_safezone[i] > 0) {
|
|
if(--priv->power_denial_safezone[i] == 0) {
|
|
/*
|
|
* Poll current, previous answers are meaningless
|
|
*/
|
|
DAA_DIRECT_REQUEST(xpd->xbus, xpd, i, DAA_READ, DAA_REG_CURRENT, 0);
|
|
}
|
|
continue;
|
|
}
|
|
if(priv->power_denial_length[i] > 0) {
|
|
priv->power_denial_length[i]--;
|
|
if(priv->power_denial_length[i] <= 0) {
|
|
/*
|
|
* But maybe the FXS started to ring (and the firmware haven't
|
|
* detected it yet). This would cause false power denials.
|
|
* So we just flag it and schedule more ticks to wait.
|
|
*/
|
|
LINE_DBG(SIGNAL, xpd, i, "Possible Power Denial Hangup\n");
|
|
priv->power_denial_delay[i] = POWER_DENIAL_DELAY;
|
|
}
|
|
continue;
|
|
}
|
|
if (priv->power_denial_delay[i] > 0) {
|
|
/*
|
|
* Ring detection by the firmware takes some time.
|
|
* Therefore we delay our decision until we are
|
|
* sure that no ring has started during this time.
|
|
*/
|
|
priv->power_denial_delay[i]--;
|
|
if (priv->power_denial_delay[i] <= 0) {
|
|
LINE_DBG(SIGNAL, xpd, i, "Power Denial Hangup\n");
|
|
priv->power_denial_delay[i] = 0;
|
|
/*
|
|
* Let Asterisk decide what to do
|
|
*/
|
|
notify_rxsig(xpd, i, DAHDI_RXSIG_ONHOOK);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For caller-id CID_STYLE_ETSI_DTMF:
|
|
* - No indication is passed before the CID
|
|
* - We try to detect it and send "fake" polarity reversal.
|
|
* - The chan_dahdi.conf should have cidstart=polarity
|
|
* - Based on an idea in http://bugs.digium.com/view.php?id=9096
|
|
*/
|
|
static void check_etsi_dtmf(xpd_t *xpd)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
int portno;
|
|
unsigned int timer_count;
|
|
|
|
if(!SPAN_REGISTERED(xpd))
|
|
return;
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
timer_count = xpd->timer_count;
|
|
for_each_line(xpd, portno) {
|
|
/* Skip offhook and ringing ports */
|
|
if(IS_OFFHOOK(xpd, portno) || PHONEDEV(xpd).ringing[portno])
|
|
continue;
|
|
if(IS_SET(priv->cidfound, portno)) {
|
|
if(timer_count > priv->cidtimer[portno] + 4000) {
|
|
/* reset flags if it's been a while */
|
|
priv->cidtimer[portno] = timer_count;
|
|
BIT_CLR(priv->cidfound, portno);
|
|
LINE_DBG(SIGNAL, xpd, portno, "Reset CID flag\n");
|
|
}
|
|
continue;
|
|
}
|
|
if(timer_count > priv->cidtimer[portno] + 400) {
|
|
struct dahdi_chan *chan = XPD_CHAN(xpd, portno);
|
|
int sample;
|
|
int i;
|
|
|
|
for(i = 0; i < DAHDI_CHUNKSIZE; i++) {
|
|
sample = DAHDI_XLAW(chan->readchunk[i], chan);
|
|
if(sample > 16000 || sample < -16000) {
|
|
priv->cidtimer[portno] = timer_count;
|
|
BIT_SET(priv->cidfound, portno);
|
|
LINE_DBG(SIGNAL, xpd, portno, "Found DTMF CLIP (%d)\n", i);
|
|
dahdi_qevent_lock(chan, DAHDI_EVENT_POLARITY);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int FXO_card_tick(xbus_t *xbus, xpd_t *xpd)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
if(poll_battery_interval != 0 && (priv->poll_counter % poll_battery_interval) == 0)
|
|
poll_battery(xbus, xpd);
|
|
#ifdef WITH_METERING
|
|
if(poll_metering_interval != 0 && (priv->poll_counter % poll_metering_interval) == 0)
|
|
poll_metering(xbus, xpd);
|
|
#endif
|
|
handle_fxo_leds(xpd);
|
|
handle_fxo_ring(xpd);
|
|
handle_fxo_power_denial(xpd);
|
|
if(caller_id_style == CID_STYLE_ETSI_DTMF && likely(xpd->card_present))
|
|
check_etsi_dtmf(xpd);
|
|
priv->poll_counter++;
|
|
return 0;
|
|
}
|
|
|
|
#include <dahdi/wctdm_user.h>
|
|
/*
|
|
* The first register is the ACIM, the other are coefficient registers.
|
|
* We define the array size explicitly to track possible inconsistencies
|
|
* if the struct is modified.
|
|
*/
|
|
static const char echotune_regs[sizeof(struct wctdm_echo_coefs)] = {30, 45, 46, 47, 48, 49, 50, 51, 52};
|
|
|
|
static int FXO_card_ioctl(xpd_t *xpd, int pos, unsigned int cmd, unsigned long arg)
|
|
{
|
|
int i,ret;
|
|
unsigned char echotune_data[ARRAY_SIZE(echotune_regs)];
|
|
|
|
BUG_ON(!xpd);
|
|
if(!XBUS_IS(xpd->xbus, READY))
|
|
return -ENODEV;
|
|
switch (cmd) {
|
|
case WCTDM_SET_ECHOTUNE:
|
|
XPD_DBG(GENERAL, xpd, "-- Setting echo registers: \n");
|
|
/* first off: check if this span is fxs. If not: -EINVALID */
|
|
if (copy_from_user(&echotune_data, (void __user *)arg, sizeof(echotune_data)))
|
|
return -EFAULT;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(echotune_regs); i++) {
|
|
XPD_DBG(REGS, xpd, "Reg=0x%02X, data=0x%02X\n", echotune_regs[i], echotune_data[i]);
|
|
ret = DAA_DIRECT_REQUEST(xpd->xbus, xpd, pos, DAA_WRITE, echotune_regs[i], echotune_data[i]);
|
|
if (ret < 0) {
|
|
LINE_NOTICE(xpd, pos, "Couldn't write %0x02X to register %0x02X\n",
|
|
echotune_data[i], echotune_regs[i]);
|
|
return ret;
|
|
}
|
|
msleep(1);
|
|
}
|
|
|
|
XPD_DBG(GENERAL, xpd, "-- Set echo registers successfully\n");
|
|
break;
|
|
case DAHDI_TONEDETECT:
|
|
/*
|
|
* Asterisk call all span types with this (FXS specific)
|
|
* call. Silently ignore it.
|
|
*/
|
|
LINE_DBG(GENERAL, xpd, pos,
|
|
"DAHDI_TONEDETECT (FXO: NOTIMPLEMENTED)\n");
|
|
return -ENOTTY;
|
|
default:
|
|
report_bad_ioctl(THIS_MODULE->name, xpd, pos, cmd);
|
|
return -ENOTTY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*---------------- FXO: HOST COMMANDS -------------------------------------*/
|
|
|
|
static /* 0x0F */ HOSTCMD(FXO, XPD_STATE, bool on)
|
|
{
|
|
int ret = 0;
|
|
struct FXO_priv_data *priv;
|
|
|
|
BUG_ON(!xbus);
|
|
BUG_ON(!xpd);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
XPD_DBG(GENERAL, xpd, "%s\n", (on) ? "on" : "off");
|
|
return ret;
|
|
}
|
|
|
|
/*---------------- FXO: Astribank Reply Handlers --------------------------*/
|
|
|
|
HANDLER_DEF(FXO, SIG_CHANGED)
|
|
{
|
|
xpp_line_t sig_status = RPACKET_FIELD(pack, FXO, SIG_CHANGED, sig_status);
|
|
xpp_line_t sig_toggles = RPACKET_FIELD(pack, FXO, SIG_CHANGED, sig_toggles);
|
|
unsigned long flags;
|
|
int i;
|
|
struct FXO_priv_data *priv;
|
|
|
|
if(!xpd) {
|
|
notify_bad_xpd(__FUNCTION__, xbus, XPACKET_ADDR(pack), cmd->name);
|
|
return -EPROTO;
|
|
}
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
XPD_DBG(SIGNAL, xpd, "(PSTN) sig_toggles=0x%04X sig_status=0x%04X\n", sig_toggles, sig_status);
|
|
spin_lock_irqsave(&xpd->lock, flags);
|
|
for_each_line(xpd, i) {
|
|
int debounce;
|
|
|
|
if(IS_SET(sig_toggles, i)) {
|
|
if(priv->battery[i] == BATTERY_OFF) {
|
|
/*
|
|
* With poll_battery_interval==0 we cannot have BATTERY_OFF
|
|
* so we won't get here
|
|
*/
|
|
LINE_NOTICE(xpd, i, "SIG_CHANGED while battery is off. Ignored.\n");
|
|
continue;
|
|
}
|
|
/* First report false ring alarms */
|
|
debounce = atomic_read(&priv->ring_debounce[i]);
|
|
if(debounce)
|
|
LINE_NOTICE(xpd, i, "debounced false ring (only %d ticks)\n", debounce);
|
|
/*
|
|
* Now set a new ring alarm.
|
|
* It will be checked in handle_fxo_ring()
|
|
*/
|
|
debounce = (IS_SET(sig_status, i)) ? ring_debounce : -ring_debounce;
|
|
atomic_set(&priv->ring_debounce[i], debounce);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&xpd->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static void update_battery_voltage(xpd_t *xpd, byte data_low, xportno_t portno)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
enum polarity_state pol;
|
|
int msec;
|
|
signed char volts = (signed char)data_low;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
priv->battery_voltage[portno] = volts;
|
|
if(PHONEDEV(xpd).ringing[portno])
|
|
goto ignore_reading; /* ring voltage create false alarms */
|
|
if(abs(volts) < battery_threshold) {
|
|
/*
|
|
* Check for battery voltage fluctuations
|
|
*/
|
|
if(priv->battery[portno] != BATTERY_OFF) {
|
|
int milliseconds;
|
|
|
|
milliseconds = priv->nobattery_debounce[portno]++ *
|
|
poll_battery_interval;
|
|
if(milliseconds > battery_debounce) {
|
|
LINE_DBG(SIGNAL, xpd, portno, "BATTERY OFF voltage=%d\n", volts);
|
|
priv->battery[portno] = BATTERY_OFF;
|
|
dahdi_report_battery(xpd, portno);
|
|
/* What's the polarity ? */
|
|
priv->polarity[portno] = POL_UNKNOWN;
|
|
priv->polarity_debounce[portno] = 0;
|
|
/* What's the current ? */
|
|
power_change(xpd, portno, POWER_UNKNOWN);
|
|
/*
|
|
* Stop further processing for now
|
|
*/
|
|
goto ignore_reading;
|
|
}
|
|
|
|
}
|
|
} else {
|
|
priv->nobattery_debounce[portno] = 0;
|
|
if(priv->battery[portno] != BATTERY_ON) {
|
|
LINE_DBG(SIGNAL, xpd, portno, "BATTERY ON voltage=%d\n", volts);
|
|
priv->battery[portno] = BATTERY_ON;
|
|
dahdi_report_battery(xpd, portno);
|
|
}
|
|
}
|
|
#if 0
|
|
/*
|
|
* Mark FXO ports without battery!
|
|
*/
|
|
if(priv->battery[portno] != BATTERY_ON)
|
|
MARK_ON(priv, portno, LED_RED);
|
|
else
|
|
MARK_OFF(priv, portno, LED_RED);
|
|
#endif
|
|
if(priv->battery[portno] != BATTERY_ON) {
|
|
priv->polarity[portno] = POL_UNKNOWN; /* What's the polarity ? */
|
|
return;
|
|
}
|
|
/*
|
|
* Handle reverse polarity
|
|
*/
|
|
if(volts == 0)
|
|
pol = POL_UNKNOWN;
|
|
else if(volts < 0)
|
|
pol = POL_NEGATIVE;
|
|
else
|
|
pol = POL_POSITIVE;
|
|
if(priv->polarity[portno] == pol) {
|
|
/*
|
|
* Same polarity, reset debounce counter
|
|
*/
|
|
priv->polarity_debounce[portno] = 0;
|
|
return;
|
|
}
|
|
/*
|
|
* Track polarity reversals and debounce spikes.
|
|
* Only reversals with long duration count.
|
|
*/
|
|
msec = priv->polarity_debounce[portno]++ * poll_battery_interval;
|
|
if (msec >= POLREV_THRESHOLD) {
|
|
priv->polarity_debounce[portno] = 0;
|
|
if(pol != POL_UNKNOWN && priv->polarity[portno] != POL_UNKNOWN) {
|
|
char *polname = NULL;
|
|
|
|
if(pol == POL_POSITIVE)
|
|
polname = "Positive";
|
|
else if(pol == POL_NEGATIVE)
|
|
polname = "Negative";
|
|
else
|
|
BUG();
|
|
LINE_DBG(SIGNAL, xpd, portno,
|
|
"Polarity changed to %s\n", polname);
|
|
/*
|
|
* Inform dahdi/Asterisk:
|
|
* 1. Maybe used for hangup detection during offhook
|
|
* 2. In some countries used to report caller-id during onhook
|
|
* but before first ring.
|
|
*/
|
|
if(caller_id_style == CID_STYLE_ETSI_FSK)
|
|
oht_pcm(xpd, portno, 1); /* will be cleared on ring/offhook */
|
|
if(SPAN_REGISTERED(xpd)) {
|
|
LINE_DBG(SIGNAL, xpd, portno,
|
|
"Send DAHDI_EVENT_POLARITY: %s\n", polname);
|
|
dahdi_qevent_lock(XPD_CHAN(xpd, portno), DAHDI_EVENT_POLARITY);
|
|
}
|
|
}
|
|
priv->polarity[portno] = pol;
|
|
}
|
|
return;
|
|
ignore_reading:
|
|
/*
|
|
* Reset debounce counters to prevent false alarms
|
|
*/
|
|
reset_battery_readings(xpd, portno); /* unstable during hook changes */
|
|
}
|
|
|
|
static void update_battery_current(xpd_t *xpd, byte data_low, xportno_t portno)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
priv->battery_current[portno] = data_low;
|
|
/*
|
|
* During ringing, current is not stable.
|
|
* During onhook there should not be current anyway.
|
|
*/
|
|
if(PHONEDEV(xpd).ringing[portno] || !IS_OFFHOOK(xpd, portno))
|
|
goto ignore_it;
|
|
/*
|
|
* Power denial with no battery voltage is meaningless
|
|
*/
|
|
if(priv->battery[portno] != BATTERY_ON)
|
|
goto ignore_it;
|
|
/* Safe zone after offhook */
|
|
if(priv->power_denial_safezone[portno] > 0)
|
|
goto ignore_it;
|
|
if(data_low < POWER_DENIAL_CURRENT) {
|
|
if(priv->power[portno] == POWER_ON) {
|
|
power_change(xpd, portno, POWER_OFF);
|
|
priv->power_denial_length[portno] = power_denial_minlen;
|
|
}
|
|
} else {
|
|
if(priv->power[portno] != POWER_ON) {
|
|
power_change(xpd, portno, POWER_ON);
|
|
priv->power_denial_length[portno] = 0;
|
|
/* We are now OFFHOOK */
|
|
hookstate_changed(xpd, portno, 1);
|
|
}
|
|
}
|
|
return;
|
|
ignore_it:
|
|
priv->power_denial_delay[portno] = 0;
|
|
}
|
|
|
|
#ifdef WITH_METERING
|
|
#define BTD_BIT BIT(0)
|
|
|
|
static void update_metering_state(xpd_t *xpd, byte data_low, lineno_t portno)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
bool metering_tone = data_low & BTD_BIT;
|
|
bool old_metering_tone;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
old_metering_tone = IS_SET(priv->metering_tone_state, portno);
|
|
LINE_DBG(SIGNAL, xpd, portno, "METERING: %s [dL=0x%X] (%d)\n",
|
|
(metering_tone) ? "ON" : "OFF",
|
|
data_low, priv->metering_count[portno]);
|
|
if(metering_tone && !old_metering_tone) {
|
|
/* Rising edge */
|
|
priv->metering_count[portno]++;
|
|
BIT_SET(priv->metering_tone_state, portno);
|
|
} else if(!metering_tone && old_metering_tone)
|
|
BIT_CLR(priv->metering_tone_state, portno);
|
|
if(metering_tone) {
|
|
/* Clear the BTD bit */
|
|
data_low &= ~BTD_BIT;
|
|
DAA_DIRECT_REQUEST(xpd->xbus, xpd, portno, DAA_WRITE, DAA_REG_METERING, data_low);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int FXO_card_register_reply(xbus_t *xbus, xpd_t *xpd, reg_cmd_t *info)
|
|
{
|
|
struct FXO_priv_data *priv;
|
|
lineno_t portno;
|
|
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
portno = info->portnum;
|
|
switch(REG_FIELD(info, regnum)) {
|
|
case DAA_REG_VBAT:
|
|
update_battery_voltage(xpd, REG_FIELD(info, data_low), portno);
|
|
break;
|
|
case DAA_REG_CURRENT:
|
|
update_battery_current(xpd, REG_FIELD(info, data_low), portno);
|
|
break;
|
|
#ifdef WITH_METERING
|
|
case DAA_REG_METERING:
|
|
update_metering_state(xpd, REG_FIELD(info, data_low), portno);
|
|
break;
|
|
#endif
|
|
}
|
|
LINE_DBG(REGS, xpd, portno, "%c reg_num=0x%X, dataL=0x%X dataH=0x%X\n",
|
|
((info->bytes == 3)?'I':'D'),
|
|
REG_FIELD(info, regnum),
|
|
REG_FIELD(info, data_low),
|
|
REG_FIELD(info, data_high));
|
|
/* Update /proc info only if reply relate to the last slic read request */
|
|
if(
|
|
REG_FIELD(&xpd->requested_reply, regnum) == REG_FIELD(info, regnum) &&
|
|
REG_FIELD(&xpd->requested_reply, do_subreg) == REG_FIELD(info, do_subreg) &&
|
|
REG_FIELD(&xpd->requested_reply, subreg) == REG_FIELD(info, subreg)) {
|
|
xpd->last_reply = *info;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int FXO_card_state(xpd_t *xpd, bool on)
|
|
{
|
|
return CALL_PROTO(FXO, XPD_STATE, xpd->xbus, xpd, on);
|
|
}
|
|
|
|
static const struct xops fxo_xops = {
|
|
.card_new = FXO_card_new,
|
|
.card_init = FXO_card_init,
|
|
.card_remove = FXO_card_remove,
|
|
.card_tick = FXO_card_tick,
|
|
.card_register_reply = FXO_card_register_reply,
|
|
};
|
|
|
|
static const struct phoneops fxo_phoneops = {
|
|
.card_dahdi_preregistration = FXO_card_dahdi_preregistration,
|
|
.card_dahdi_postregistration = FXO_card_dahdi_postregistration,
|
|
.card_hooksig = FXO_card_hooksig,
|
|
.card_pcm_recompute = generic_card_pcm_recompute,
|
|
.card_pcm_fromspan = generic_card_pcm_fromspan,
|
|
.card_pcm_tospan = generic_card_pcm_tospan,
|
|
.card_timing_priority = generic_timing_priority,
|
|
.card_ioctl = FXO_card_ioctl,
|
|
.card_open = FXO_card_open,
|
|
.card_state = FXO_card_state,
|
|
};
|
|
|
|
static xproto_table_t PROTO_TABLE(FXO) = {
|
|
.owner = THIS_MODULE,
|
|
.entries = {
|
|
/* Prototable Card Opcode */
|
|
XENTRY( FXO, FXO, SIG_CHANGED ),
|
|
},
|
|
.name = "FXO", /* protocol name */
|
|
.ports_per_subunit = 8,
|
|
.type = XPD_TYPE_FXO,
|
|
.xops = &fxo_xops,
|
|
.phoneops = &fxo_phoneops,
|
|
.packet_is_valid = fxo_packet_is_valid,
|
|
.packet_dump = fxo_packet_dump,
|
|
};
|
|
|
|
static bool fxo_packet_is_valid(xpacket_t *pack)
|
|
{
|
|
const xproto_entry_t *xe;
|
|
|
|
//DBG(GENERAL, "\n");
|
|
xe = xproto_card_entry(&PROTO_TABLE(FXO), XPACKET_OP(pack));
|
|
return xe != NULL;
|
|
}
|
|
|
|
static void fxo_packet_dump(const char *msg, xpacket_t *pack)
|
|
{
|
|
DBG(GENERAL, "%s\n", msg);
|
|
}
|
|
|
|
/*------------------------- DAA Handling --------------------------*/
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
static int proc_fxo_info_read(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
unsigned long flags;
|
|
xpd_t *xpd = data;
|
|
struct FXO_priv_data *priv;
|
|
int i;
|
|
|
|
if(!xpd)
|
|
return -ENODEV;
|
|
spin_lock_irqsave(&xpd->lock, flags);
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
len += sprintf(page + len, "\t%-17s: ", "Channel");
|
|
for_each_line(xpd, i) {
|
|
if(!IS_SET(PHONEDEV(xpd).digital_outputs, i) && !IS_SET(PHONEDEV(xpd).digital_inputs, i))
|
|
len += sprintf(page + len, "%4d ", i % 10);
|
|
}
|
|
len += sprintf(page + len, "\nLeds:");
|
|
len += sprintf(page + len, "\n\t%-17s: ", "state");
|
|
for_each_line(xpd, i) {
|
|
if(!IS_SET(PHONEDEV(xpd).digital_outputs, i) && !IS_SET(PHONEDEV(xpd).digital_inputs, i))
|
|
len += sprintf(page + len, " %d%d ",
|
|
IS_SET(priv->ledstate[LED_GREEN], i),
|
|
IS_SET(priv->ledstate[LED_RED], i));
|
|
}
|
|
len += sprintf(page + len, "\n\t%-17s: ", "blinking");
|
|
for_each_line(xpd, i) {
|
|
if(!IS_SET(PHONEDEV(xpd).digital_outputs, i) && !IS_SET(PHONEDEV(xpd).digital_inputs, i))
|
|
len += sprintf(page + len, " %d%d ",
|
|
IS_BLINKING(priv,i,LED_GREEN),
|
|
IS_BLINKING(priv,i,LED_RED));
|
|
}
|
|
len += sprintf(page + len, "\nBattery-Data:");
|
|
len += sprintf(page + len, "\n\t%-17s: ", "voltage");
|
|
for_each_line(xpd, i) {
|
|
len += sprintf(page + len, "%4d ", priv->battery_voltage[i]);
|
|
}
|
|
len += sprintf(page + len, "\n\t%-17s: ", "current");
|
|
for_each_line(xpd, i) {
|
|
len += sprintf(page + len, "%4d ", priv->battery_current[i]);
|
|
}
|
|
len += sprintf(page + len, "\nBattery:");
|
|
len += sprintf(page + len, "\n\t%-17s: ", "on");
|
|
for_each_line(xpd, i) {
|
|
char *bat;
|
|
|
|
if(priv->battery[i] == BATTERY_ON)
|
|
bat = "+";
|
|
else if(priv->battery[i] == BATTERY_OFF)
|
|
bat = "-";
|
|
else
|
|
bat = ".";
|
|
len += sprintf(page + len, "%4s ", bat);
|
|
}
|
|
len += sprintf(page + len, "\n\t%-17s: ", "debounce");
|
|
for_each_line(xpd, i) {
|
|
len += sprintf(page + len, "%4d ", priv->nobattery_debounce[i]);
|
|
}
|
|
len += sprintf(page + len, "\nPolarity-Reverse:");
|
|
len += sprintf(page + len, "\n\t%-17s: ", "polarity");
|
|
for_each_line(xpd, i) {
|
|
char *polname;
|
|
|
|
if(priv->polarity[i] == POL_POSITIVE)
|
|
polname = "+";
|
|
else if(priv->polarity[i] == POL_NEGATIVE)
|
|
polname = "-";
|
|
else
|
|
polname = ".";
|
|
len += sprintf(page + len, "%4s ", polname);
|
|
}
|
|
len += sprintf(page + len, "\n\t%-17s: ", "debounce");
|
|
for_each_line(xpd, i) {
|
|
len += sprintf(page + len, "%4d ", priv->polarity_debounce[i]);
|
|
}
|
|
len += sprintf(page + len, "\nPower-Denial:");
|
|
len += sprintf(page + len, "\n\t%-17s: ", "power");
|
|
for_each_line(xpd, i) {
|
|
char *curr;
|
|
|
|
if(priv->power[i] == POWER_ON)
|
|
curr = "+";
|
|
else if(priv->power[i] == POWER_OFF)
|
|
curr = "-";
|
|
else
|
|
curr = ".";
|
|
len += sprintf(page + len, "%4s ", curr);
|
|
}
|
|
len += sprintf(page + len, "\n\t%-17s: ", "safezone");
|
|
for_each_line(xpd, i) {
|
|
len += sprintf(page + len, "%4d ", priv->power_denial_safezone[i]);
|
|
}
|
|
len += sprintf(page + len, "\n\t%-17s: ", "delay");
|
|
for_each_line(xpd, i) {
|
|
len += sprintf(page + len, "%4d ", priv->power_denial_delay[i]);
|
|
}
|
|
#ifdef WITH_METERING
|
|
len += sprintf(page + len, "\nMetering:");
|
|
len += sprintf(page + len, "\n\t%-17s: ", "count");
|
|
for_each_line(xpd, i) {
|
|
len += sprintf(page + len, "%4d ", priv->metering_count[i]);
|
|
}
|
|
#endif
|
|
len += sprintf(page + len, "\n");
|
|
spin_unlock_irqrestore(&xpd->lock, flags);
|
|
if (len <= off+count)
|
|
*eof = 1;
|
|
*start = page + off;
|
|
len -= off;
|
|
if (len > count)
|
|
len = count;
|
|
if (len < 0)
|
|
len = 0;
|
|
return len;
|
|
}
|
|
#endif
|
|
|
|
#ifdef WITH_METERING
|
|
static int proc_xpd_metering_read(char *page, char **start, off_t off, int count, int *eof, void *data)
|
|
{
|
|
int len = 0;
|
|
unsigned long flags;
|
|
xpd_t *xpd = data;
|
|
struct FXO_priv_data *priv;
|
|
int i;
|
|
|
|
if(!xpd)
|
|
return -ENODEV;
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
spin_lock_irqsave(&xpd->lock, flags);
|
|
len += sprintf(page + len, "# Chan\tMeter (since last read)\n");
|
|
for_each_line(xpd, i) {
|
|
len += sprintf(page + len, "%d\t%d\n",
|
|
i, priv->metering_count[i]);
|
|
}
|
|
spin_unlock_irqrestore(&xpd->lock, flags);
|
|
if (len <= off+count)
|
|
*eof = 1;
|
|
*start = page + off;
|
|
len -= off;
|
|
if (len > count)
|
|
len = count;
|
|
if (len < 0)
|
|
len = 0;
|
|
/* Zero meters */
|
|
for_each_line(xpd, i)
|
|
priv->metering_count[i] = 0;
|
|
return len;
|
|
}
|
|
#endif
|
|
|
|
static DEVICE_ATTR_READER(fxo_battery_show, dev, buf)
|
|
{
|
|
xpd_t *xpd;
|
|
struct FXO_priv_data *priv;
|
|
unsigned long flags;
|
|
int len = 0;
|
|
int i;
|
|
|
|
BUG_ON(!dev);
|
|
xpd = dev_to_xpd(dev);
|
|
if(!xpd)
|
|
return -ENODEV;
|
|
priv = xpd->priv;
|
|
BUG_ON(!priv);
|
|
spin_lock_irqsave(&xpd->lock, flags);
|
|
for_each_line(xpd, i) {
|
|
char bat;
|
|
|
|
if(priv->battery[i] == BATTERY_ON)
|
|
bat = '+';
|
|
else if(priv->battery[i] == BATTERY_OFF)
|
|
bat = '-';
|
|
else
|
|
bat = '.';
|
|
len += sprintf(buf + len, "%c ", bat);
|
|
}
|
|
len += sprintf(buf + len, "\n");
|
|
spin_unlock_irqrestore(&xpd->lock, flags);
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(fxo_battery, S_IRUGO, fxo_battery_show, NULL);
|
|
|
|
|
|
static int fxo_xpd_probe(struct device *dev)
|
|
{
|
|
xpd_t *xpd;
|
|
int ret;
|
|
|
|
xpd = dev_to_xpd(dev);
|
|
/* Is it our device? */
|
|
if(xpd->type != XPD_TYPE_FXO) {
|
|
XPD_ERR(xpd, "drop suggestion for %s (%d)\n",
|
|
dev_name(dev), xpd->type);
|
|
return -EINVAL;
|
|
}
|
|
XPD_DBG(DEVICES, xpd, "SYSFS\n");
|
|
ret = device_create_file(dev, &dev_attr_fxo_battery);
|
|
if(ret) {
|
|
XPD_ERR(xpd, "%s: device_create_file(fxo_battery) failed: %d\n", __FUNCTION__, ret);
|
|
goto fail_fxo_battery;
|
|
}
|
|
return 0;
|
|
fail_fxo_battery:
|
|
return ret;
|
|
}
|
|
|
|
static int fxo_xpd_remove(struct device *dev)
|
|
{
|
|
xpd_t *xpd;
|
|
|
|
xpd = dev_to_xpd(dev);
|
|
XPD_DBG(DEVICES, xpd, "SYSFS\n");
|
|
device_remove_file(dev, &dev_attr_fxo_battery);
|
|
return 0;
|
|
}
|
|
|
|
static struct xpd_driver fxo_driver = {
|
|
.type = XPD_TYPE_FXO,
|
|
.driver = {
|
|
.name = "fxo",
|
|
#ifndef OLD_HOTPLUG_SUPPORT
|
|
.owner = THIS_MODULE,
|
|
#endif
|
|
.probe = fxo_xpd_probe,
|
|
.remove = fxo_xpd_remove
|
|
}
|
|
};
|
|
|
|
static int __init card_fxo_startup(void)
|
|
{
|
|
int ret;
|
|
|
|
if(ring_debounce <= 0) {
|
|
ERR("ring_debounce=%d. Must be positive number of ticks\n", ring_debounce);
|
|
return -EINVAL;
|
|
}
|
|
if((ret = xpd_driver_register(&fxo_driver.driver)) < 0)
|
|
return ret;
|
|
INFO("revision %s\n", XPP_VERSION);
|
|
#ifdef WITH_METERING
|
|
INFO("FEATURE: WITH METERING Detection\n");
|
|
#else
|
|
INFO("FEATURE: NO METERING Detection\n");
|
|
#endif
|
|
xproto_register(&PROTO_TABLE(FXO));
|
|
return 0;
|
|
}
|
|
|
|
static void __exit card_fxo_cleanup(void)
|
|
{
|
|
xproto_unregister(&PROTO_TABLE(FXO));
|
|
xpd_driver_unregister(&fxo_driver.driver);
|
|
}
|
|
|
|
MODULE_DESCRIPTION("XPP FXO Card Driver");
|
|
MODULE_AUTHOR("Oron Peled <oron@actcom.co.il>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(XPP_VERSION);
|
|
MODULE_ALIAS_XPD(XPD_TYPE_FXO);
|
|
|
|
module_init(card_fxo_startup);
|
|
module_exit(card_fxo_cleanup);
|