dahdi-linux/drivers/dahdi/xpp/xproto.h
Oron Peled d3a28c50cf xpp: a separate unit_descriptor
The new FXS chip supports two ports for each chip and hence we once
again need to look at hardware differently.

Struct unit_description includes information about all chips/port in a
specific module.

Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
2017-03-16 13:46:15 +02:00

349 lines
10 KiB
C

#ifndef XPROTO_H
#define XPROTO_H
/*
* Written by Oron Peled <oron@actcom.co.il>
* Copyright (C) 2004-2006, Xorcom
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include "xdefs.h"
#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/proc_fs.h>
#include <dahdi/kernel.h>
/*
* This must match the firmware protocol version
*/
#define XPP_PROTOCOL_VERSION 30
struct unit_descriptor;
struct xpd_addr {
uint8_t subunit:SUBUNIT_BITS;
uint8_t reserved:1;
uint8_t unit:UNIT_BITS;
uint8_t sync_master:1;
} PACKED;
#define MKADDR(p, u, s) do { \
(p)->unit = (u); \
(p)->subunit = (s); \
(p)->sync_master = 0; \
} while (0)
struct xpacket_header {
uint16_t packet_len:10;
uint16_t reserved:1;
uint16_t is_pcm:1;
uint16_t pcmslot:4;
uint8_t opcode;
struct xpd_addr addr;
} PACKED;
#define XPACKET_OP(p) ((p)->head.opcode)
#define XPACKET_LEN(p) ((p)->head.packet_len)
#define XPACKET_IS_PCM(p) ((p)->head.is_pcm)
#define XPACKET_PCMSLOT(p) ((p)->head.pcmslot)
#define XPACKET_RESERVED(p) ((p)->head.reserved)
#define XPACKET_ADDR(p) ((p)->head.addr)
#define XPACKET_ADDR_UNIT(p) (XPACKET_ADDR(p).unit)
#define XPACKET_ADDR_SUBUNIT(p) (XPACKET_ADDR(p).subunit)
#define XPACKET_ADDR_SYNC(p) (XPACKET_ADDR(p).sync_master)
#define XPACKET_ADDR_RESERVED(p) (XPACKET_ADDR(p).reserved)
#define PROTO_TABLE(n) n ## _protocol_table
/*
* The LSB of the type number signifies:
* 0 - TO_PSTN
* 1 - TO_PHONE
*/
#define XPD_TYPE_FXS 1 // TO_PHONE
#define XPD_TYPE_FXO 2 // TO_PSTN
#define XPD_TYPE_BRI 3 // TO_PSTN/TO_PHONE (from hardware)
#define XPD_TYPE_PRI 4 // TO_PSTN/TO_PHONE (runtime)
#define XPD_TYPE_ECHO 5 // Octasic echo canceller
#define XPD_TYPE_NOMODULE 7
typedef __u8 xpd_type_t;
#define XPD_TYPE_PREFIX "xpd-type-"
#define MODULE_ALIAS_XPD(type) \
MODULE_ALIAS(XPD_TYPE_PREFIX __stringify(type))
#define PCM_CHUNKSIZE (CHANNELS_PERXPD * 8) /* samples of 8 bytes */
bool valid_xpd_addr(const struct xpd_addr *addr);
#define XPROTO_NAME(card, op) card ## _ ## op
#define XPROTO_HANDLER(card, op) XPROTO_NAME(card, op ## _handler)
#define XPROTO_CALLER(card, op) XPROTO_NAME(card, op ## _send)
#define HANDLER_DEF(card, op) \
static int XPROTO_HANDLER(card, op) ( \
xbus_t *xbus, \
xpd_t *xpd, \
const xproto_entry_t *cmd, \
xpacket_t *pack)
#define CALL_PROTO(card, op, ...) XPROTO_CALLER(card, op)(__VA_ARGS__)
#define DECLARE_CMD(card, op, ...) \
int CALL_PROTO(card, op, xbus_t *xbus, xpd_t *xpd, ## __VA_ARGS__)
#define HOSTCMD(card, op, ...) \
DECLARE_CMD(card, op, ## __VA_ARGS__)
#define RPACKET_NAME(card, op) XPROTO_NAME(RPACKET_ ## card, op)
#define RPACKET_TYPE(card, op) struct RPACKET_NAME(card, op)
#define DEF_RPACKET_DATA(card, op, ...) \
RPACKET_TYPE(card, op) { \
struct xpacket_header head; \
__VA_ARGS__ \
} PACKED
#define RPACKET_HEADERSIZE sizeof(struct xpacket_header)
#define RPACKET_FIELD(p, card, op, field) \
(((RPACKET_TYPE(card, op) *)(p))->field)
#define RPACKET_SIZE(card, op) sizeof(RPACKET_TYPE(card, op))
#define XENTRY(prototab, module, op) \
[ XPROTO_NAME(module, op) ] = { \
.handler = XPROTO_HANDLER(module, op), \
.name = #op, \
.table = &PROTO_TABLE(prototab) \
}
#define XPACKET_INIT(p, card, op, to, pcm, pcmslot) \
do { \
XPACKET_OP(p) = XPROTO_NAME(card, op); \
XPACKET_LEN(p) = RPACKET_SIZE(card, op); \
XPACKET_IS_PCM(p) = (pcm); \
XPACKET_PCMSLOT(p) = (pcmslot); \
XPACKET_RESERVED(p) = 0; \
XPACKET_ADDR_UNIT(p) = XBUS_UNIT(to); \
XPACKET_ADDR_SUBUNIT(p) = XBUS_SUBUNIT(to); \
XPACKET_ADDR_SYNC(p) = 0; \
XPACKET_ADDR_RESERVED(p) = 0; \
} while (0)
#define XFRAME_NEW_CMD(frm, p, xbus, card, op, to) \
do { \
int pack_len = RPACKET_SIZE(card, op); \
\
if (!XBUS_FLAGS(xbus, CONNECTED)) \
return -ENODEV; \
(frm) = ALLOC_SEND_XFRAME(xbus); \
if (!(frm)) \
return -ENOMEM; \
(p) = xframe_next_packet(frm, pack_len); \
if (!(p)) \
return -ENOMEM; \
XPACKET_INIT(p, card, op, to, 0, 0); \
(frm)->usec_towait = 0; \
} while (0)
#endif
/*----------------- register handling --------------------------------*/
#define MULTIBYTE_MAX_LEN 5 /* FPGA firmware limitation */
struct reg_cmd_header {
__u8 bytes:3; /* Length (for Multibyte) */
__u8 eoframe:1; /* For BRI -- end of frame */
__u8 portnum:3; /* For port specific registers */
__u8 is_multibyte:1;
} PACKED;
struct reg_cmd_REG {
__u8 reserved:3;
__u8 do_expander:1;
__u8 do_datah:1;
__u8 do_subreg:1;
__u8 read_request:1;
__u8 all_ports_broadcast:1;
__u8 regnum;
__u8 subreg;
__u8 data_low;
__u8 data_high;
} PACKED;
typedef struct reg_cmd {
struct reg_cmd_header h;
union {
struct reg_cmd_REG r;
/* For Write-Multibyte commands in BRI */
struct {
__u8 xdata[MULTIBYTE_MAX_LEN];
} PACKED d;
} PACKED alt;
} PACKED reg_cmd_t;
/* Shortcut access macros */
#define REG_CMD_SIZE(variant) (sizeof(struct reg_cmd_ ## variant))
#define REG_FIELD(regptr, member) ((regptr)->alt.r.member)
#define REG_XDATA(regptr) ((regptr)->alt.d.xdata)
#ifdef __KERNEL__
#define XFRAME_NEW_REG_CMD(frm, p, xbus, card, variant, to) \
do { \
int pack_len = \
sizeof(struct xpacket_header) + \
sizeof(struct reg_cmd_header) + \
sizeof(struct reg_cmd_ ## variant); \
\
if (!XBUS_FLAGS(xbus, CONNECTED)) \
return -ENODEV; \
(frm) = ALLOC_SEND_XFRAME(xbus); \
if (!(frm)) \
return -ENOMEM; \
(p) = xframe_next_packet(frm, pack_len); \
if (!(p)) \
return -ENOMEM; \
XPACKET_INIT(p, card, REGISTER_REQUEST, to, 0, 0); \
XPACKET_LEN(p) = pack_len; \
(frm)->usec_towait = 0; \
} while (0)
/*----------------- protocol tables ----------------------------------*/
typedef struct xproto_entry xproto_entry_t;
typedef struct xproto_table xproto_table_t;
typedef int (*xproto_handler_t) (xbus_t *xbus, xpd_t *xpd,
const xproto_entry_t *cmd, xpacket_t *pack);
const xproto_table_t *xproto_get(xpd_type_t cardtype);
void xproto_put(const xproto_table_t *xtable);
const xproto_entry_t *xproto_card_entry(const xproto_table_t *table,
__u8 opcode);
xproto_handler_t xproto_card_handler(const xproto_table_t *table,
__u8 opcode);
const xproto_entry_t *xproto_global_entry(__u8 opcode);
xproto_handler_t xproto_global_handler(__u8 opcode);
/*
* XMETHOD() resolve to method pointer (NULL for optional methods)
* CALL_XMETHOD() calls the method, passing mandatory arguments
*/
#define XMETHOD(name, xpd) ((xpd)->xops->name)
#define CALL_XMETHOD(name, xpd, ...) \
(XMETHOD(name, (xpd))((xpd)->xbus, (xpd), ## __VA_ARGS__))
/*
* PHONE_METHOD() resolve to method pointer (NULL for optional methods)
* CALL_PHONE_METHOD() calls the method, passing mandatory arguments
*/
#define PHONE_METHOD(name, xpd) (PHONEDEV(xpd).phoneops->name)
#define CALL_PHONE_METHOD(name, xpd, ...) \
(PHONE_METHOD(name, (xpd))((xpd), ## __VA_ARGS__))
struct phoneops {
void (*card_pcm_recompute) (xpd_t *xpd, xpp_line_t pcm_mask);
void (*card_pcm_fromspan) (xpd_t *xpd, xpacket_t *pack);
void (*card_pcm_tospan) (xpd_t *xpd, xpacket_t *pack);
int (*echocancel_timeslot) (xpd_t *xpd, int pos);
int (*echocancel_setmask) (xpd_t *xpd, xpp_line_t ec_mask);
int (*card_timing_priority) (xpd_t *xpd);
int (*card_dahdi_preregistration) (xpd_t *xpd, bool on);
int (*card_dahdi_postregistration) (xpd_t *xpd, bool on);
int (*card_hooksig) (xpd_t *xpd, int pos, enum dahdi_txsig txsig);
int (*card_ioctl) (xpd_t *xpd, int pos, unsigned int cmd,
unsigned long arg);
int (*card_open) (xpd_t *xpd, lineno_t pos);
int (*card_close) (xpd_t *xpd, lineno_t pos);
int (*card_state) (xpd_t *xpd, bool on);
};
struct xops {
xpd_t *(*card_new) (xbus_t *xbus, int unit, int subunit,
const xproto_table_t *proto_table,
const struct unit_descriptor *unit_descriptor,
bool to_phone);
int (*card_init) (xbus_t *xbus, xpd_t *xpd);
int (*card_remove) (xbus_t *xbus, xpd_t *xpd);
int (*card_tick) (xbus_t *xbus, xpd_t *xpd);
int (*card_register_reply) (xbus_t *xbus, xpd_t *xpd, reg_cmd_t *reg);
};
struct xproto_entry {
xproto_handler_t handler;
const char *name;
xproto_table_t *table;
};
struct xproto_table {
struct module *owner;
xproto_entry_t entries[256]; /* Indexed by opcode */
const struct xops *xops; /* Card level operations */
const struct phoneops *phoneops; /* DAHDI operations */
const struct echoops *echoops; /* Echo Canceller operations */
xpd_type_t type;
__u8 ports_per_subunit;
const char *name;
bool (*packet_is_valid) (xpacket_t *pack);
void (*packet_dump) (const char *msg, xpacket_t *pack);
};
#include "card_global.h"
#include "card_fxs.h"
#include "card_fxo.h"
#include "card_bri.h"
#include "card_pri.h"
#define MEMBER(card, op) RPACKET_TYPE(card, op) RPACKET_NAME(card, op)
struct xpacket {
struct xpacket_header head;
union {
MEMBER(GLOBAL, NULL_REPLY);
MEMBER(GLOBAL, PCM_WRITE);
MEMBER(GLOBAL, PCM_READ);
MEMBER(GLOBAL, SYNC_REPLY);
MEMBER(GLOBAL, ERROR_CODE);
MEMBER(FXS, SIG_CHANGED);
MEMBER(FXO, SIG_CHANGED);
__u8 data[0];
};
/* Last byte is chksum */
} PACKED;
void dump_packet(const char *msg, const xpacket_t *packet, bool debug);
void dump_reg_cmd(const char msg[], bool writing, xbus_t *xbus,
__u8 unit, xportno_t port, const reg_cmd_t *regcmd);
int xframe_receive(xbus_t *xbus, xframe_t *xframe);
void notify_bad_xpd(const char *funcname, xbus_t *xbus,
const struct xpd_addr addr, const char *msg);
int xproto_register(const xproto_table_t *proto_table);
void xproto_unregister(const xproto_table_t *proto_table);
const xproto_entry_t *xproto_global_entry(__u8 opcode);
const char *xproto_name(xpd_type_t xpd_type);
#endif /* __KERNEL__ */
#endif /* XPROTO_H */