dahdi-linux/drivers/dahdi/wcxb_spi.c
Shaun Ruffell 348f6ab030 wcaxx: New driver for A4A/A4B/A8A/A8B analog cards.
This is a driver for the new line of analog cards that shares a common interface
with the TE133/TE134 and the TE435.

Signed-off-by: Shaun Ruffell <sruffell@digium.com>
2013-11-11 14:39:19 -06:00

383 lines
10 KiB
C

/*
* wcxb SPI library
*
* Copyright (C) 2013 Digium, Inc.
*
* All rights reserved.
*
*/
/*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2 as published by the
* Free Software Foundation. See the LICENSE file included with
* this program for more details.
*/
#define DEBUG
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/device.h>
#include <linux/completion.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <dahdi/kernel.h>
#include "wcxb_spi.h"
#define BBIT(n) (1UL << (31UL - (n)))
#define SPISRR 0x40
#define SPISRR_RESET 0x0000000a /* Resets Device */
#define SPICR 0x60
#define SPICR_LSB_FIRST BBIT(22) /* LSB First. 0=MSB first transfer */
#define SPICR_MASTER_INHIBIT BBIT(23) /* Master Transaction Inhibit */
#define SPICR_SLAVE_SELECT BBIT(24) /* Manual Slave Select Assert Enable */
#define SPICR_RX_FIFO_RESET BBIT(25) /* Receive FIFO Reset */
#define SPICR_TX_FIFO_RESET BBIT(26) /* Transmit FIFO Reset */
#define SPICR_CPHA BBIT(27) /* Clock Phase */
#define SPICR_CPOL BBIT(28) /* Clock Polarity 0=Active High */
#define SPICR_MASTER BBIT(29) /* Master Enable */
#define SPICR_SPE BBIT(30) /* SPI System Enable */
#define SPICR_LOOP BBIT(31) /* Local Loopback Mode */
#define SPICR_START_TRANSFER (SPICR_CPHA | SPICR_CPOL | \
SPICR_MASTER | SPICR_SPE)
#define SPICR_READY_TRANSFER (SPICR_MASTER_INHIBIT | SPICR_START_TRANSFER)
#define SPISR 0x64 /* SPI Status Register */
#define SPISR_SLAVE_MODE_SEL BBIT(26) /* Slave Mode Select Flag */
#define SPISR_MODF BBIT(27) /* Mode-Fault Error Flag */
#define SPISR_TX_FULL BBIT(28) /* Transmit FIFO Full */
#define SPISR_TX_EMPTY BBIT(29) /* Transmit FIFO Empty */
#define SPISR_RX_FULL BBIT(30) /* Receive FIFO Full */
#define SPISR_RX_EMPTY BBIT(31) /* Receive FIFO Empty */
#define SPIDTR 0x68 /* SPI Data Transmit Register */
#define SPIDRR 0x6c /* SPI Data Receive Register */
#define SPISSR 0x70 /* SPI Slave Select Register */
#undef SUCCESS
#define SUCCESS 0
struct wcxb_spi_master {
struct device *parent;
struct list_head message_queue;
spinlock_t lock;
void __iomem *base;
struct wcxb_spi_message *cur_msg;
struct wcxb_spi_transfer *cur_transfer;
u16 bytes_left;
u16 bytes_in_fifo;
const u8 *cur_tx_byte;
u8 *cur_rx_byte;
u16 auto_cs:1;
};
static inline void _wcxb_assert_chip_select(struct wcxb_spi_master *master,
unsigned int cs)
{
const int cs_mask = ~(1UL << cs);
iowrite32be(cs_mask, master->base + SPISSR);
ioread32be(master->base + SPISSR);
}
static inline void _wcxb_clear_chip_select(struct wcxb_spi_master *master)
{
iowrite32be(~(0), master->base + SPISSR);
ioread32(master->base + SPISSR);
}
static inline void wcxb_spi_reset_controller(struct wcxb_spi_master *master)
{
u32 spicr = SPICR_READY_TRANSFER;
spicr |= (master->auto_cs) ? 0 : SPICR_SLAVE_SELECT;
iowrite32be(SPISRR_RESET, master->base + SPISRR);
iowrite32be(spicr, master->base + SPICR);
iowrite32be(0xffffffff, master->base + SPISSR);
}
struct wcxb_spi_master *wcxb_spi_master_create(struct device *parent,
void __iomem *membase,
bool auto_cs)
{
struct wcxb_spi_master *master = NULL;
master = kzalloc(sizeof(struct wcxb_spi_master), GFP_KERNEL);
if (!master)
goto error_exit;
spin_lock_init(&master->lock);
INIT_LIST_HEAD(&master->message_queue);
master->base = membase;
master->parent = parent;
master->auto_cs = (auto_cs) ? 1 : 0;
wcxb_spi_reset_controller(master);
return master;
error_exit:
kfree(master);
return NULL;
}
void wcxb_spi_master_destroy(struct wcxb_spi_master *master)
{
struct wcxb_spi_message *m;
if (!master)
return;
while (!list_empty(&master->message_queue)) {
m = list_first_entry(&master->message_queue,
struct wcxb_spi_message, node);
list_del(&m->node);
if (m->complete)
m->complete(m->arg);
}
kfree(master);
return;
}
static inline bool is_txfifo_empty(const struct wcxb_spi_master *master)
{
return ((ioread32(master->base + SPISR) &
cpu_to_be32(SPISR_TX_EMPTY)) > 0);
}
static const u8 DUMMY_TX = 0xff;
static u8 DUMMY_RX;
static void _wcxb_spi_transfer_to_fifo(struct wcxb_spi_master *master)
{
const unsigned int FIFO_SIZE = 16;
u32 spicr;
while (master->bytes_left && master->bytes_in_fifo < FIFO_SIZE) {
iowrite32be(*master->cur_tx_byte, master->base + SPIDTR);
master->bytes_in_fifo++;
master->bytes_left--;
if (&DUMMY_TX != master->cur_tx_byte)
master->cur_tx_byte++;
}
spicr = (master->auto_cs) ? SPICR_START_TRANSFER :
SPICR_START_TRANSFER | SPICR_SLAVE_SELECT;
iowrite32be(spicr, master->base + SPICR);
}
static void _wcxb_spi_transfer_from_fifo(struct wcxb_spi_master *master)
{
u32 spicr;
while (master->bytes_in_fifo) {
*master->cur_rx_byte = ioread32be(master->base + SPIDRR);
if (&DUMMY_RX != master->cur_rx_byte)
master->cur_rx_byte++;
--master->bytes_in_fifo;
}
spicr = SPICR_START_TRANSFER;
spicr |= (master->auto_cs) ? 0 : SPICR_SLAVE_SELECT;
iowrite32be(spicr | SPICR_MASTER_INHIBIT, master->base + SPICR);
}
static void _wcxb_spi_start_transfer(struct wcxb_spi_master *master,
struct wcxb_spi_transfer *t)
{
#ifdef DEBUG
if (!t || !master || (!t->tx_buf && !t->rx_buf) ||
master->cur_transfer) {
WARN_ON(1);
return;
}
#endif
master->cur_transfer = t;
master->bytes_left = t->len;
master->cur_tx_byte = (t->tx_buf) ?: &DUMMY_TX;
master->cur_rx_byte = (t->rx_buf) ?: &DUMMY_RX;
_wcxb_spi_transfer_to_fifo(master);
}
/**
* _wcxb_spi_start_message - Start a new message transferring.
*
* Must be called with master->lock held.
*
*/
static int _wcxb_spi_start_message(struct wcxb_spi_master *master,
struct wcxb_spi_message *message)
{
struct wcxb_spi_transfer *t;
if (master->cur_msg) {
/* There is already a message in progress. Queue for later. */
list_add_tail(&message->node, &master->message_queue);
return 0;
}
if (!message->spi) {
dev_dbg(master->parent,
"Queueing message without SPI device specified?\n");
return -EINVAL;
};
master->cur_msg = message;
_wcxb_assert_chip_select(master, message->spi->chip_select);
t = list_first_entry(&message->transfers,
struct wcxb_spi_transfer, node);
_wcxb_spi_start_transfer(master, t);
return 0;
}
/**
* wcxb_spi_complete_message - Complete the current message.
*
* Called after all transfers in current message have been completed. This will
* complete the current message and start the next queued message if there are
* any.
*
* Must be called with the master->lock held.
*
*/
static void _wcxb_spi_complete_cur_msg(struct wcxb_spi_master *master)
{
struct wcxb_spi_message *message;
if (!master->cur_msg)
return;
message = master->cur_msg;
message->status = SUCCESS;
_wcxb_clear_chip_select(master);
master->cur_msg = NULL;
if (!list_empty(&master->message_queue)) {
message = list_first_entry(&master->message_queue,
struct wcxb_spi_message, node);
list_del(&message->node);
_wcxb_spi_start_message(master, message);
}
return;
}
static inline bool
_wcxb_spi_is_last_transfer(const struct wcxb_spi_transfer *t,
const struct wcxb_spi_message *message)
{
return t->node.next == &message->transfers;
}
static inline struct wcxb_spi_transfer *
_wcxb_spi_next_transfer(struct wcxb_spi_transfer *t)
{
return list_entry(t->node.next, struct wcxb_spi_transfer, node);
}
/**
* wcxb_spi_handle_interrupt - Drives the transfers forward.
*
* Doesn't necessarily need to be called in the context of a real interrupt, but
* should be called with interrupts disabled on the local CPU.
*
*/
void wcxb_spi_handle_interrupt(struct wcxb_spi_master *master)
{
struct wcxb_spi_message *msg = master->cur_msg;
struct wcxb_spi_transfer *t = master->cur_transfer;
void (*complete)(void *arg) = NULL;
unsigned long flags;
/* Check if we're not in the middle of a transfer, or not finished with
* a part of one. */
spin_lock_irqsave(&master->lock, flags);
if (!msg || !is_txfifo_empty(master))
goto done;
#ifdef DEBUG
if (!t) {
dev_dbg(master->parent,
"No current transfer in %s\n", __func__);
goto done;
}
#endif
/* First read any data out of the receive FIFO into the current
* transfer. */
_wcxb_spi_transfer_from_fifo(master);
if (master->bytes_left) {
/* The current transfer isn't finished. */
_wcxb_spi_transfer_to_fifo(master);
goto done;
}
/* The current transfer is finished. Check for another transfer in this
* message or complete it and look for another message to start. */
master->cur_transfer = NULL;
if (_wcxb_spi_is_last_transfer(t, msg)) {
complete = msg->complete;
_wcxb_spi_complete_cur_msg(master);
} else {
t = _wcxb_spi_next_transfer(t);
_wcxb_spi_start_transfer(master, t);
}
done:
spin_unlock_irqrestore(&master->lock, flags);
/* Do not call the complete call back under the bus lock. */
if (complete)
complete(msg->arg);
return;
}
int wcxb_spi_async(struct wcxb_spi_device *spi,
struct wcxb_spi_message *message)
{
int res;
unsigned long flags;
WARN_ON(!spi || !message || !spi->master);
if (list_empty(&message->transfers)) {
/* No transfers in this message? */
if (message->complete)
message->complete(message->arg);
message->status = -EINVAL;
return 0;
}
message->status = -EINPROGRESS;
message->spi = spi;
spin_lock_irqsave(&spi->master->lock, flags);
res = _wcxb_spi_start_message(spi->master, message);
spin_unlock_irqrestore(&spi->master->lock, flags);
return res;
}
static void wcxb_spi_complete_message(void *arg)
{
complete((struct completion *)arg);
}
int wcxb_spi_sync(struct wcxb_spi_device *spi, struct wcxb_spi_message *message)
{
DECLARE_COMPLETION_ONSTACK(done);
WARN_ON(!spi || !spi->master);
message->complete = wcxb_spi_complete_message;
message->arg = &done;
wcxb_spi_async(spi, message);
/* TODO: There has got to be a better way to do this. */
while (!try_wait_for_completion(&done)) {
wcxb_spi_handle_interrupt(spi->master);
cpu_relax();
}
return message->status;
}