/* * Written by Oron Peled * Copyright (C) 2004-2006, Xorcom * * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #include #include #include #include #include #include "xpd.h" #include "xproto.h" #include "xpp_dahdi.h" #include "card_fxs.h" #include "dahdi_debug.h" #include "xbus-core.h" static const char rcsid[] = "$Id$"; /* must be before dahdi_debug.h */ static DEF_PARM(int, debug, 0, 0644, "Print DBG statements"); static DEF_PARM_BOOL(reversepolarity, 0, 0644, "Reverse Line Polarity"); static DEF_PARM_BOOL(dtmf_detection, 1, 0644, "Do DTMF detection in hardware"); #ifdef POLL_DIGITAL_INPUTS static DEF_PARM(uint, poll_digital_inputs, 1000, 0644, "Poll Digital Inputs"); #endif static DEF_PARM_BOOL(vmwi_ioctl, 1, 0644, "Asterisk support VMWI notification via ioctl"); static DEF_PARM_BOOL(ring_trapez, 0, 0664, "Use trapezoid ring type"); static DEF_PARM_BOOL(lower_ringing_noise, 0, 0664, "Lower ringing noise (may loose CallerID)"); /* Signaling is opposite (fxo signalling for fxs card) */ #if 1 #define FXS_DEFAULT_SIGCAP \ (DAHDI_SIG_FXOKS | DAHDI_SIG_FXOLS | DAHDI_SIG_FXOGS) #else #define FXS_DEFAULT_SIGCAP \ (DAHDI_SIG_SF | DAHDI_SIG_EM) #endif #define VMWI_TYPE(priv, pos, type) \ ((priv)->vmwisetting[pos].vmwi_type & DAHDI_VMWI_ ## type) #define VMWI_NEON(priv, pos) VMWI_TYPE(priv, pos, HVAC) #define LINES_DIGI_OUT 2 #define LINES_DIGI_INP 4 enum fxs_leds { LED_GREEN, LED_RED, OUTPUT_RELAY, }; #define NUM_LEDS 2 /* Shortcuts */ #define SLIC_WRITE 1 #define SLIC_READ 0 #define SLIC_DIRECT_REQUEST(xbus, xpd, port, writing, reg, dL) \ xpp_register_request((xbus), (xpd), (port), \ (writing), (reg), 0, 0, (dL), 0, 0, 0) #define SLIC_INDIRECT_REQUEST(xbus, xpd, port, writing, reg, dL, dH) \ xpp_register_request((xbus), (xpd), (port), \ (writing), 0x1E, 1, (reg), (dL), 1, (dH), 0) #define VALID_PORT(port) \ (((port) >= 0 && (port) <= 7) || (port) == PORT_BROADCAST) #define REG_DIGITAL_IOCTRL 0x06 /* LED and RELAY control */ /* Values of SLIC linefeed control register (0x40) */ enum fxs_state { FXS_LINE_OPEN = 0x00, /* Open */ FXS_LINE_ACTIVE = 0x01, /* Forward active */ FXS_LINE_OHTRANS = 0x02, /* Forward on-hook transmission */ FXS_LINE_TIPOPEN = 0x03, /* TIP open */ FXS_LINE_RING = 0x04, /* Ringing */ FXS_LINE_REV_ACTIVE = 0x05, /* Reverse active */ FXS_LINE_REV_OHTRANS = 0x06, /* Reverse on-hook transmission */ FXS_LINE_RING_OPEN = 0x07 /* RING open */ }; #define FXS_LINE_POL_ACTIVE \ ((reversepolarity) ? FXS_LINE_REV_ACTIVE : FXS_LINE_ACTIVE) #define FXS_LINE_POL_OHTRANS \ ((reversepolarity) ? FXS_LINE_REV_OHTRANS : FXS_LINE_OHTRANS) /* * DTMF detection */ #define REG_DTMF_DECODE 0x18 /* 24 - DTMF Decode Status */ #define REG_BATTERY 0x42 /* 66 - Battery Feed Control */ #define REG_BATTERY_BATSL BIT(1) /* Battery Feed Select */ /* 68 - Loop Closure/Ring Trip Detect Status */ #define REG_LOOPCLOSURE 0x44 #define REG_LOOPCLOSURE_ZERO 0xF8 /* Loop Closure zero bits. */ #define REG_LOOPCLOSURE_LCR BIT(0) /* Loop Closure Detect Indicator. */ /*---------------- FXS Protocol Commands ----------------------------------*/ static bool fxs_packet_is_valid(xpacket_t *pack); static void fxs_packet_dump(const char *msg, xpacket_t *pack); #ifdef CONFIG_PROC_FS static const struct file_operations proc_fxs_info_ops; #ifdef WITH_METERING static const struct file_operations proc_xpd_metering_ops; #endif #endif static void start_stop_vm_led(xbus_t *xbus, xpd_t *xpd, lineno_t pos); #define PROC_REGISTER_FNAME "slics" #define PROC_FXS_INFO_FNAME "fxs_info" #ifdef WITH_METERING #define PROC_METERING_FNAME "metering_gen" #endif struct FXS_priv_data { #ifdef WITH_METERING struct proc_dir_entry *meteringfile; #endif struct proc_dir_entry *fxs_info; xpp_line_t ledstate[NUM_LEDS]; /* 0 - OFF, 1 - ON */ xpp_line_t ledcontrol[NUM_LEDS]; /* 0 - OFF, 1 - ON */ xpp_line_t search_fsk_pattern; xpp_line_t found_fsk_pattern; xpp_line_t update_offhook_state; xpp_line_t want_dtmf_events; /* what dahdi want */ xpp_line_t want_dtmf_mute; /* what dahdi want */ xpp_line_t prev_key_down; /* DTMF down sets the bit */ xpp_line_t neon_blinking; xpp_line_t vbat_h; /* High voltage */ struct timeval prev_key_time[CHANNELS_PERXPD]; int led_counter[NUM_LEDS][CHANNELS_PERXPD]; int ohttimer[CHANNELS_PERXPD]; #define OHT_TIMER 6000 /* How long after RING to retain OHT */ /* IDLE changing hook state */ enum fxs_state idletxhookstate[CHANNELS_PERXPD]; enum fxs_state lasttxhook[CHANNELS_PERXPD]; struct dahdi_vmwi_info vmwisetting[CHANNELS_PERXPD]; }; /* * LED counter values: * n>1 : BLINK every n'th tick */ #define LED_COUNTER(priv, pos, color) ((priv)->led_counter[color][pos]) #define IS_BLINKING(priv, pos, color) (LED_COUNTER(priv, pos, color) > 0) #define MARK_BLINK(priv, pos, color, t) \ ((priv)->led_counter[color][pos] = (t)) #define MARK_OFF(priv, pos, color) \ do { \ BIT_CLR((priv)->ledcontrol[color], (pos)); \ MARK_BLINK((priv), (pos), (color), 0); \ } while (0) #define MARK_ON(priv, pos, color) \ do { \ BIT_SET((priv)->ledcontrol[color], (pos)); \ MARK_BLINK((priv), (pos), (color), 0); \ } while (0) #define LED_BLINK_RING (1000/8) /* in ticks */ /*---------------- FXS: Static functions ----------------------------------*/ static int do_chan_power(xbus_t *xbus, xpd_t *xpd, lineno_t chan, bool on) { struct FXS_priv_data *priv; unsigned long *p; int was; BUG_ON(!xbus); BUG_ON(!xpd); priv = xpd->priv; p = (unsigned long *)&priv->vbat_h; if (on) was = test_and_set_bit(chan, p) != 0; else was = test_and_clear_bit(chan, p) != 0; if (was == on) { LINE_DBG(SIGNAL, xpd, chan, "%s (same, ignored)\n", (on) ? "up" : "down"); return 0; } LINE_DBG(SIGNAL, xpd, chan, "%s\n", (on) ? "up" : "down"); return SLIC_DIRECT_REQUEST(xbus, xpd, chan, SLIC_WRITE, REG_BATTERY, (on) ? REG_BATTERY_BATSL : 0x00); } static int linefeed_control(xbus_t *xbus, xpd_t *xpd, lineno_t chan, enum fxs_state value) { struct FXS_priv_data *priv; bool want_vbat_h; priv = xpd->priv; /* * Should we drop vbat_h only during actuall ring? * - It would lower the noise caused to other channels by * group ringing * - But it may also stop CallerID from passing through the SLIC */ want_vbat_h = value == FXS_LINE_RING; if (lower_ringing_noise || want_vbat_h) do_chan_power(xbus, xpd, chan, want_vbat_h); LINE_DBG(SIGNAL, xpd, chan, "value=0x%02X\n", value); priv->lasttxhook[chan] = value; return SLIC_DIRECT_REQUEST(xbus, xpd, chan, SLIC_WRITE, 0x40, value); } static void vmwi_search(xpd_t *xpd, lineno_t pos, bool on) { struct FXS_priv_data *priv; priv = xpd->priv; BUG_ON(!xpd); if (VMWI_NEON(priv, pos) && on) { LINE_DBG(SIGNAL, xpd, pos, "START\n"); BIT_SET(priv->search_fsk_pattern, pos); } else { LINE_DBG(SIGNAL, xpd, pos, "STOP\n"); BIT_CLR(priv->search_fsk_pattern, pos); } } /* * LED and RELAY control is done via SLIC register 0x06: * 7 6 5 4 3 2 1 0 * +-----+-----+-----+-----+-----+-----+-----+-----+ * | M2 | M1 | M3 | C2 | O1 | O3 | C1 | C3 | * +-----+-----+-----+-----+-----+-----+-----+-----+ * * Cn - Control bit (control one digital line) * On - Output bit (program a digital line for output) * Mn - Mask bit (only the matching output control bit is affected) * * C3 - OUTPUT RELAY (0 - OFF, 1 - ON) * C1 - GREEN LED (0 - OFF, 1 - ON) * O3 - Output RELAY (this line is output) * O1 - Output GREEN (this line is output) * C2 - RED LED (0 - OFF, 1 - ON) * M3 - Mask RELAY. (1 - C3 effect the OUTPUT RELAY) * M2 - Mask RED. (1 - C2 effect the RED LED) * M1 - Mask GREEN. (1 - C1 effect the GREEN LED) * * The OUTPUT RELAY (actually a relay out) is connected to line 0 and 4 only. */ // GREEN RED OUTPUT RELAY static const int led_register_mask[] = { BIT(7), BIT(6), BIT(5) }; static const int led_register_vals[] = { BIT(4), BIT(1), BIT(0) }; /* * pos can be: * - A line number * - ALL_LINES. This is not valid anymore since 8-Jan-2007. */ static int do_led(xpd_t *xpd, lineno_t chan, __u8 which, bool on) { int ret = 0; struct FXS_priv_data *priv; int value; xbus_t *xbus; BUG_ON(!xpd); BUG_ON(chan == ALL_LINES); xbus = xpd->xbus; priv = xpd->priv; which = which % NUM_LEDS; if (IS_SET(PHONEDEV(xpd).digital_outputs, chan) || IS_SET(PHONEDEV(xpd).digital_inputs, chan)) goto out; if (chan == PORT_BROADCAST) { priv->ledstate[which] = (on) ? ~0 : 0; } else { if (on) BIT_SET(priv->ledstate[which], chan); else BIT_CLR(priv->ledstate[which], chan); } LINE_DBG(LEDS, xpd, chan, "LED: which=%d -- %s\n", which, (on) ? "on" : "off"); value = BIT(2) | BIT(3); value |= ((BIT(5) | BIT(6) | BIT(7)) & ~led_register_mask[which]); if (on) value |= led_register_vals[which]; ret = SLIC_DIRECT_REQUEST(xbus, xpd, chan, SLIC_WRITE, REG_DIGITAL_IOCTRL, value); out: return ret; } static void handle_fxs_leds(xpd_t *xpd) { int i; const enum fxs_leds colors[] = { LED_GREEN, LED_RED }; enum fxs_leds color; unsigned int timer_count; struct FXS_priv_data *priv; BUG_ON(!xpd); priv = xpd->priv; timer_count = xpd->timer_count; for (color = 0; color < ARRAY_SIZE(colors); color++) { for_each_line(xpd, i) { if (IS_SET (PHONEDEV(xpd).digital_outputs | PHONEDEV(xpd). digital_inputs, i)) continue; /* Blinking? */ if ((xpd->blink_mode & BIT(i)) || IS_BLINKING(priv, i, color)) { int mod_value = LED_COUNTER(priv, i, color); if (!mod_value) /* safety value */ mod_value = DEFAULT_LED_PERIOD; /* led state is toggled */ if ((timer_count % mod_value) == 0) { LINE_DBG(LEDS, xpd, i, "ledstate=%s\n", (IS_SET (priv->ledstate[color], i)) ? "ON" : "OFF"); if (!IS_SET(priv->ledstate[color], i)) do_led(xpd, i, color, 1); else do_led(xpd, i, color, 0); } } else if (IS_SET (priv->ledcontrol[color] & ~priv-> ledstate[color], i)) { do_led(xpd, i, color, 1); } else if (IS_SET (~priv->ledcontrol[color] & priv-> ledstate[color], i)) { do_led(xpd, i, color, 0); } } } } static void restore_leds(xpd_t *xpd) { struct FXS_priv_data *priv; int i; priv = xpd->priv; for_each_line(xpd, i) { if (IS_OFFHOOK(xpd, i)) MARK_ON(priv, i, LED_GREEN); else MARK_OFF(priv, i, LED_GREEN); } } #ifdef WITH_METERING static int metering_gen(xpd_t *xpd, lineno_t chan, bool on) { __u8 value = (on) ? 0x94 : 0x00; LINE_DBG(SIGNAL, xpd, chan, "METERING Generate: %s\n", (on) ? "ON" : "OFF"); return SLIC_DIRECT_REQUEST(xpd->xbus, xpd, chan, SLIC_WRITE, 0x23, value); } #endif /*---------------- FXS: Methods -------------------------------------------*/ static void fxs_proc_remove(xbus_t *xbus, xpd_t *xpd) { struct FXS_priv_data *priv; BUG_ON(!xpd); priv = xpd->priv; #ifdef CONFIG_PROC_FS #ifdef WITH_METERING if (priv->meteringfile) { XPD_DBG(PROC, xpd, "Removing xpd metering tone file\n"); remove_proc_entry(PROC_METERING_FNAME, xpd->proc_xpd_dir); priv->meteringfile = NULL; } #endif if (priv->fxs_info) { XPD_DBG(PROC, xpd, "Removing xpd FXS_INFO file\n"); remove_proc_entry(PROC_FXS_INFO_FNAME, xpd->proc_xpd_dir); priv->fxs_info = NULL; } #endif } static int fxs_proc_create(xbus_t *xbus, xpd_t *xpd) { struct FXS_priv_data *priv; BUG_ON(!xpd); priv = xpd->priv; #ifdef CONFIG_PROC_FS XPD_DBG(PROC, xpd, "Creating FXS_INFO file\n"); priv->fxs_info = proc_create_data(PROC_FXS_INFO_FNAME, 0444, xpd->proc_xpd_dir, &proc_fxs_info_ops, xpd); if (!priv->fxs_info) { XPD_ERR(xpd, "Failed to create proc file '%s'\n", PROC_FXS_INFO_FNAME); fxs_proc_remove(xbus, xpd); return -EINVAL; } SET_PROC_DIRENTRY_OWNER(priv->fxs_info); #ifdef WITH_METERING XPD_DBG(PROC, xpd, "Creating Metering tone file\n"); priv->meteringfile = proc_create_data(PROC_METERING_FNAME, 0200, xpd->proc_xpd_dir, &proc_xpd_metering_ops, xpd); if (!priv->meteringfile) { XPD_ERR(xpd, "Failed to create proc file '%s'\n", PROC_METERING_FNAME); fxs_proc_remove(xbus, xpd); return -EINVAL; } #endif #endif return 0; } static xpd_t *FXS_card_new(xbus_t *xbus, int unit, int subunit, const xproto_table_t *proto_table, __u8 subtype, int subunits, int subunit_ports, bool to_phone) { xpd_t *xpd = NULL; int channels; int regular_channels; struct FXS_priv_data *priv; int i; int d_inputs = 0; int d_outputs = 0; if (!to_phone) { XBUS_NOTICE(xbus, "XPD=%d%d: try to instanciate FXS with reverse direction\n", unit, subunit); return NULL; } if (subtype == 2) regular_channels = min(6, subunit_ports); else regular_channels = min(8, subunit_ports); channels = regular_channels; /* Calculate digital inputs/outputs */ if (unit == 0 && subtype != 4) { channels += 6; /* 2 DIGITAL OUTPUTS, 4 DIGITAL INPUTS */ d_inputs = LINES_DIGI_INP; d_outputs = LINES_DIGI_OUT; } xpd = xpd_alloc(xbus, unit, subunit, subtype, subunits, sizeof(struct FXS_priv_data), proto_table, channels); if (!xpd) return NULL; /* Initialize digital inputs/outputs */ if (d_inputs) { XBUS_DBG(GENERAL, xbus, "Initialize %d digital inputs\n", d_inputs); PHONEDEV(xpd).digital_inputs = BITMASK(d_inputs) << (regular_channels + d_outputs); } else XBUS_DBG(GENERAL, xbus, "No digital inputs\n"); if (d_outputs) { XBUS_DBG(GENERAL, xbus, "Initialize %d digital outputs\n", d_outputs); PHONEDEV(xpd).digital_outputs = BITMASK(d_outputs) << regular_channels; } else XBUS_DBG(GENERAL, xbus, "No digital outputs\n"); PHONEDEV(xpd).direction = TO_PHONE; xpd->type_name = "FXS"; if (fxs_proc_create(xbus, xpd) < 0) goto err; priv = xpd->priv; for_each_line(xpd, i) { priv->idletxhookstate[i] = FXS_LINE_POL_ACTIVE; } return xpd; err: xpd_free(xpd); return NULL; } static int FXS_card_init(xbus_t *xbus, xpd_t *xpd) { int ret = 0; int i; BUG_ON(!xpd); /* * Setup ring timers */ /* Software controled ringing (for CID) */ /* Ringing Oscilator Control */ ret = SLIC_DIRECT_REQUEST(xbus, xpd, PORT_BROADCAST, SLIC_WRITE, 0x22, 0x00); if (ret < 0) goto err; for_each_line(xpd, i) { linefeed_control(xbus, xpd, i, FXS_LINE_POL_ACTIVE); } XPD_DBG(GENERAL, xpd, "done\n"); for_each_line(xpd, i) { do_led(xpd, i, LED_GREEN, 0); do_led(xpd, i, LED_RED, 0); } for_each_line(xpd, i) { do_led(xpd, i, LED_GREEN, 1); msleep(50); } for_each_line(xpd, i) { do_led(xpd, i, LED_GREEN, 0); msleep(50); } restore_leds(xpd); CALL_PHONE_METHOD(card_pcm_recompute, xpd, 0); /* * We should query our offhook state long enough time after we * set the linefeed_control() * So we do this after the LEDs */ for_each_line(xpd, i) { if (IS_SET (PHONEDEV(xpd).digital_outputs | PHONEDEV(xpd). digital_inputs, i)) continue; SLIC_DIRECT_REQUEST(xbus, xpd, i, SLIC_READ, REG_LOOPCLOSURE, 0); } return 0; err: fxs_proc_remove(xbus, xpd); XPD_ERR(xpd, "Failed initializing registers (%d)\n", ret); return ret; } static int FXS_card_remove(xbus_t *xbus, xpd_t *xpd) { BUG_ON(!xpd); XPD_DBG(GENERAL, xpd, "\n"); fxs_proc_remove(xbus, xpd); return 0; } static int FXS_card_dahdi_preregistration(xpd_t *xpd, bool on) { xbus_t *xbus; struct FXS_priv_data *priv; int i; BUG_ON(!xpd); xbus = xpd->xbus; BUG_ON(!xbus); priv = xpd->priv; BUG_ON(!priv); XPD_DBG(GENERAL, xpd, "%s\n", (on) ? "on" : "off"); PHONEDEV(xpd).span.spantype = SPANTYPE_ANALOG_FXS; for_each_line(xpd, i) { struct dahdi_chan *cur_chan = XPD_CHAN(xpd, i); XPD_DBG(GENERAL, xpd, "setting FXS channel %d\n", i); if (IS_SET(PHONEDEV(xpd).digital_outputs, i)) { snprintf(cur_chan->name, MAX_CHANNAME, "XPP_OUT/%02d/%1d%1d/%d", xbus->num, xpd->addr.unit, xpd->addr.subunit, i); } else if (IS_SET(PHONEDEV(xpd).digital_inputs, i)) { snprintf(cur_chan->name, MAX_CHANNAME, "XPP_IN/%02d/%1d%1d/%d", xbus->num, xpd->addr.unit, xpd->addr.subunit, i); } else { snprintf(cur_chan->name, MAX_CHANNAME, "XPP_FXS/%02d/%1d%1d/%d", xbus->num, xpd->addr.unit, xpd->addr.subunit, i); } cur_chan->chanpos = i + 1; cur_chan->pvt = xpd; cur_chan->sigcap = FXS_DEFAULT_SIGCAP; if (!vmwi_ioctl) { /* Old asterisk, assume default VMWI type */ priv->vmwisetting[i].vmwi_type = DAHDI_VMWI_HVAC; } } for_each_line(xpd, i) { MARK_ON(priv, i, LED_GREEN); msleep(4); MARK_ON(priv, i, LED_RED); } return 0; } static int FXS_card_dahdi_postregistration(xpd_t *xpd, bool on) { xbus_t *xbus; struct FXS_priv_data *priv; int i; BUG_ON(!xpd); xbus = xpd->xbus; BUG_ON(!xbus); priv = xpd->priv; BUG_ON(!priv); XPD_DBG(GENERAL, xpd, "%s\n", (on) ? "on" : "off"); for_each_line(xpd, i) { MARK_OFF(priv, i, LED_GREEN); msleep(2); MARK_OFF(priv, i, LED_RED); msleep(2); } restore_leds(xpd); return 0; } /* * Called with XPD spinlocked */ static void __do_mute_dtmf(xpd_t *xpd, int pos, bool muteit) { struct FXS_priv_data *priv; priv = xpd->priv; LINE_DBG(SIGNAL, xpd, pos, "%s\n", (muteit) ? "MUTE" : "UNMUTE"); if (muteit) BIT_SET(PHONEDEV(xpd).mute_dtmf, pos); else BIT_CLR(PHONEDEV(xpd).mute_dtmf, pos); /* already spinlocked */ CALL_PHONE_METHOD(card_pcm_recompute, xpd, priv->search_fsk_pattern); } static int set_vm_led_mode(xbus_t *xbus, xpd_t *xpd, int pos, unsigned int msg_waiting) { int ret = 0; struct FXS_priv_data *priv; BUG_ON(!xbus); BUG_ON(!xpd); priv = xpd->priv; if (VMWI_NEON(priv, pos) && msg_waiting) { /* A write to register 0x40 will now turn on/off the VM led */ LINE_DBG(SIGNAL, xpd, pos, "NEON\n"); BIT_SET(priv->neon_blinking, pos); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x16, 0xE8, 0x03); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x15, 0xEF, 0x7B); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x14, 0x9F, 0x00); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x22, 0x19); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x30, 0xE0); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x31, 0x01); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x32, 0xF0); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x33, 0x05); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x1D, 0x00, 0x46); } else if (ring_trapez) { LINE_DBG(SIGNAL, xpd, pos, "RINGER: Trapez ring\n"); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x16, 0xC8, 0x00); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x15, 0xAB, 0x5E); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x14, 0x8C, 0x01); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x22, 0x01); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x4A, 0x34); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x30, 0x00); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x31, 0x00); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x32, 0x00); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x33, 0x00); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x1D, 0x00, 0x36); } else { /* A write to register 0x40 will now turn on/off the ringer */ LINE_DBG(SIGNAL, xpd, pos, "RINGER\n"); BIT_CLR(priv->neon_blinking, pos); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x16, 0x00, 0x00); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x15, 0x77, 0x01); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x14, 0xFD, 0x7E); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x22, 0x00); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x30, 0x00); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x31, 0x00); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x32, 0x00); ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x33, 0x00); /* High Vbat~ -82V[Dc] */ ret += SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x4A, 0x34); ret += SLIC_INDIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x1D, 0x00, 0x36); } return (ret ? -EPROTO : 0); } static void start_stop_vm_led(xbus_t *xbus, xpd_t *xpd, lineno_t pos) { struct FXS_priv_data *priv; unsigned int msgs; BUG_ON(!xpd); if (IS_SET (PHONEDEV(xpd).digital_outputs | PHONEDEV(xpd).digital_inputs, pos)) return; priv = xpd->priv; msgs = PHONEDEV(xpd).msg_waiting[pos]; LINE_DBG(SIGNAL, xpd, pos, "%s\n", (msgs) ? "ON" : "OFF"); set_vm_led_mode(xbus, xpd, pos, msgs); do_chan_power(xbus, xpd, pos, msgs > 0); linefeed_control(xbus, xpd, pos, (msgs > 0) ? FXS_LINE_RING : priv->idletxhookstate[pos]); } static int relay_out(xpd_t *xpd, int pos, bool on) { int value; int which = pos; int relay_channels[] = { 0, 4 }; BUG_ON(!xpd); /* map logical position to output port number (0/1) */ which -= (xpd->subtype == 2) ? 6 : 8; LINE_DBG(SIGNAL, xpd, pos, "which=%d -- %s\n", which, (on) ? "on" : "off"); which = which % ARRAY_SIZE(relay_channels); value = BIT(2) | BIT(3); value |= ((BIT(5) | BIT(6) | BIT(7)) & ~led_register_mask[OUTPUT_RELAY]); if (on) value |= led_register_vals[OUTPUT_RELAY]; return SLIC_DIRECT_REQUEST(xpd->xbus, xpd, relay_channels[which], SLIC_WRITE, REG_DIGITAL_IOCTRL, value); } static int send_ring(xpd_t *xpd, lineno_t chan, bool on) { int ret = 0; xbus_t *xbus; struct FXS_priv_data *priv; enum fxs_state value = (on) ? FXS_LINE_RING : FXS_LINE_POL_ACTIVE; BUG_ON(!xpd); xbus = xpd->xbus; BUG_ON(!xbus); LINE_DBG(SIGNAL, xpd, chan, "%s\n", (on) ? "on" : "off"); priv = xpd->priv; set_vm_led_mode(xbus, xpd, chan, 0); do_chan_power(xbus, xpd, chan, on); /* Power up (for ring) */ ret = linefeed_control(xbus, xpd, chan, value); if (on) { MARK_BLINK(priv, chan, LED_GREEN, LED_BLINK_RING); } else { if (IS_BLINKING(priv, chan, LED_GREEN)) MARK_BLINK(priv, chan, LED_GREEN, 0); } return ret; } static int FXS_card_hooksig(xpd_t *xpd, int pos, enum dahdi_txsig txsig) { struct FXS_priv_data *priv; int ret = 0; struct dahdi_chan *chan = NULL; enum fxs_state txhook; unsigned long flags; LINE_DBG(SIGNAL, xpd, pos, "%s\n", txsig2str(txsig)); priv = xpd->priv; BUG_ON(PHONEDEV(xpd).direction != TO_PHONE); if (IS_SET(PHONEDEV(xpd).digital_inputs, pos)) { LINE_DBG(SIGNAL, xpd, pos, "Ignoring signal sent to digital input line\n"); return 0; } if (SPAN_REGISTERED(xpd)) chan = XPD_CHAN(xpd, pos); switch (txsig) { case DAHDI_TXSIG_ONHOOK: spin_lock_irqsave(&xpd->lock, flags); PHONEDEV(xpd).ringing[pos] = 0; oht_pcm(xpd, pos, 0); vmwi_search(xpd, pos, 0); BIT_CLR(priv->want_dtmf_events, pos); BIT_CLR(priv->want_dtmf_mute, pos); __do_mute_dtmf(xpd, pos, 0); spin_unlock_irqrestore(&xpd->lock, flags); if (IS_SET(PHONEDEV(xpd).digital_outputs, pos)) { LINE_DBG(SIGNAL, xpd, pos, "%s -> digital output OFF\n", txsig2str(txsig)); ret = relay_out(xpd, pos, 0); return ret; } if (priv->lasttxhook[pos] == FXS_LINE_OPEN) { /* * Restore state after KEWL hangup. */ LINE_DBG(SIGNAL, xpd, pos, "KEWL STOP\n"); linefeed_control(xpd->xbus, xpd, pos, FXS_LINE_POL_ACTIVE); if (IS_OFFHOOK(xpd, pos)) MARK_ON(priv, pos, LED_GREEN); } ret = send_ring(xpd, pos, 0); // RING off if (!IS_OFFHOOK(xpd, pos)) start_stop_vm_led(xpd->xbus, xpd, pos); txhook = priv->lasttxhook[pos]; if (chan) { switch (chan->sig) { case DAHDI_SIG_EM: case DAHDI_SIG_FXOKS: case DAHDI_SIG_FXOLS: txhook = priv->idletxhookstate[pos]; break; case DAHDI_SIG_FXOGS: txhook = FXS_LINE_TIPOPEN; break; } } ret = linefeed_control(xpd->xbus, xpd, pos, txhook); break; case DAHDI_TXSIG_OFFHOOK: if (IS_SET(PHONEDEV(xpd).digital_outputs, pos)) { LINE_NOTICE(xpd, pos, "%s -> Is digital output. Ignored\n", txsig2str(txsig)); return -EINVAL; } txhook = priv->lasttxhook[pos]; if (PHONEDEV(xpd).ringing[pos]) { oht_pcm(xpd, pos, 1); txhook = FXS_LINE_OHTRANS; } PHONEDEV(xpd).ringing[pos] = 0; if (chan) { switch (chan->sig) { case DAHDI_SIG_EM: txhook = FXS_LINE_POL_ACTIVE; break; default: txhook = priv->idletxhookstate[pos]; break; } } ret = linefeed_control(xpd->xbus, xpd, pos, txhook); break; case DAHDI_TXSIG_START: PHONEDEV(xpd).ringing[pos] = 1; oht_pcm(xpd, pos, 0); vmwi_search(xpd, pos, 0); if (IS_SET(PHONEDEV(xpd).digital_outputs, pos)) { LINE_DBG(SIGNAL, xpd, pos, "%s -> digital output ON\n", txsig2str(txsig)); ret = relay_out(xpd, pos, 1); return ret; } ret = send_ring(xpd, pos, 1); // RING on break; case DAHDI_TXSIG_KEWL: if (IS_SET(PHONEDEV(xpd).digital_outputs, pos)) { LINE_DBG(SIGNAL, xpd, pos, "%s -> Is digital output. Ignored\n", txsig2str(txsig)); return -EINVAL; } linefeed_control(xpd->xbus, xpd, pos, FXS_LINE_OPEN); MARK_OFF(priv, pos, LED_GREEN); break; default: XPD_NOTICE(xpd, "%s: Can't set tx state to %s (%d)\n", __func__, txsig2str(txsig), txsig); ret = -EINVAL; } return ret; } static int set_vmwi(xpd_t *xpd, int pos, unsigned long arg) { struct FXS_priv_data *priv; struct dahdi_vmwi_info vmwisetting; const int vmwi_flags = DAHDI_VMWI_LREV | DAHDI_VMWI_HVDC | DAHDI_VMWI_HVAC; priv = xpd->priv; BUG_ON(!priv); if (copy_from_user (&vmwisetting, (__user void *)arg, sizeof(vmwisetting))) return -EFAULT; if ((vmwisetting.vmwi_type & ~vmwi_flags) != 0) { LINE_NOTICE(xpd, pos, "Bad DAHDI_VMWI_CONFIG: 0x%X\n", vmwisetting.vmwi_type); return -EINVAL; } LINE_DBG(SIGNAL, xpd, pos, "DAHDI_VMWI_CONFIG: 0x%X\n", vmwisetting.vmwi_type); if (VMWI_TYPE(priv, pos, LREV)) { LINE_NOTICE(xpd, pos, "%s: VMWI(lrev) is not implemented yet. Ignored.\n", __func__); } if (VMWI_TYPE(priv, pos, HVDC)) { LINE_NOTICE(xpd, pos, "%s: VMWI(hvdc) is not implemented yet. Ignored.\n", __func__); } if (VMWI_TYPE(priv, pos, HVAC)) ; /* VMWI_NEON */ if (priv->vmwisetting[pos].vmwi_type == 0) ; /* Disable VMWI */ priv->vmwisetting[pos] = vmwisetting; set_vm_led_mode(xpd->xbus, xpd, pos, PHONEDEV(xpd).msg_waiting[pos]); return 0; } /* * Private ioctl() * We don't need it now, since we detect vmwi via FSK patterns */ static int FXS_card_ioctl(xpd_t *xpd, int pos, unsigned int cmd, unsigned long arg) { struct FXS_priv_data *priv; xbus_t *xbus; int val; unsigned long flags; BUG_ON(!xpd); priv = xpd->priv; BUG_ON(!priv); xbus = xpd->xbus; BUG_ON(!xbus); if (!XBUS_IS(xbus, READY)) return -ENODEV; if (pos < 0 || pos >= PHONEDEV(xpd).channels) { XPD_NOTICE(xpd, "Bad channel number %d in %s(), cmd=%u\n", pos, __func__, cmd); return -EINVAL; } switch (cmd) { case DAHDI_ONHOOKTRANSFER: if (get_user(val, (int __user *)arg)) return -EFAULT; LINE_DBG(SIGNAL, xpd, pos, "DAHDI_ONHOOKTRANSFER (%d millis)\n", val); if (IS_SET (PHONEDEV(xpd).digital_inputs | PHONEDEV(xpd). digital_outputs, pos)) return 0; /* Nothing to do */ oht_pcm(xpd, pos, 1); /* Get ready of VMWI FSK tones */ if (priv->lasttxhook[pos] == FXS_LINE_POL_ACTIVE || IS_SET(priv->neon_blinking, pos)) { priv->ohttimer[pos] = val; priv->idletxhookstate[pos] = FXS_LINE_POL_OHTRANS; vmwi_search(xpd, pos, 1); CALL_PHONE_METHOD(card_pcm_recompute, xpd, priv->search_fsk_pattern); LINE_DBG(SIGNAL, xpd, pos, "Start OHT_TIMER. wanted_pcm_mask=0x%X\n", PHONEDEV(xpd).wanted_pcm_mask); } if (VMWI_NEON(priv, pos) && !IS_OFFHOOK(xpd, pos)) start_stop_vm_led(xbus, xpd, pos); return 0; case DAHDI_TONEDETECT: if (get_user(val, (int __user *)arg)) return -EFAULT; LINE_DBG(SIGNAL, xpd, pos, "DAHDI_TONEDETECT: %s %s (dtmf_detection=%s)\n", (val & DAHDI_TONEDETECT_ON) ? "ON" : "OFF", (val & DAHDI_TONEDETECT_MUTE) ? "MUTE" : "NO-MUTE", (dtmf_detection ? "YES" : "NO")); if (!dtmf_detection) { spin_lock_irqsave(&xpd->lock, flags); if (IS_SET(priv->want_dtmf_events, pos)) { /* * Detection mode changed: * Disable DTMF interrupts */ SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x17, 0); } BIT_CLR(priv->want_dtmf_events, pos); BIT_CLR(priv->want_dtmf_mute, pos); __do_mute_dtmf(xpd, pos, 0); spin_unlock_irqrestore(&xpd->lock, flags); return -ENOTTY; } /* * During natively bridged calls, Asterisk * will request one of the sides to stop sending * dtmf events. Check the requested state. */ spin_lock_irqsave(&xpd->lock, flags); if (val & DAHDI_TONEDETECT_ON) { if (!IS_SET(priv->want_dtmf_events, pos)) { /* * Detection mode changed: * Enable DTMF interrupts */ LINE_DBG(SIGNAL, xpd, pos, "DAHDI_TONEDETECT: " "Enable Hardware DTMF\n"); SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x17, 1); } BIT_SET(priv->want_dtmf_events, pos); } else { if (IS_SET(priv->want_dtmf_events, pos)) { /* * Detection mode changed: * Disable DTMF interrupts */ LINE_DBG(SIGNAL, xpd, pos, "DAHDI_TONEDETECT: " "Disable Hardware DTMF\n"); SLIC_DIRECT_REQUEST(xbus, xpd, pos, SLIC_WRITE, 0x17, 0); } BIT_CLR(priv->want_dtmf_events, pos); } if (val & DAHDI_TONEDETECT_MUTE) { BIT_SET(priv->want_dtmf_mute, pos); } else { BIT_CLR(priv->want_dtmf_mute, pos); __do_mute_dtmf(xpd, pos, 0); } spin_unlock_irqrestore(&xpd->lock, flags); return 0; case DAHDI_SETPOLARITY: if (get_user(val, (int __user *)arg)) return -EFAULT; /* * Asterisk may send us this if chan_dahdi config * has "hanguponpolarityswitch=yes" to notify * that the other side has hanged up. * * This has no effect on normal phone (but we may * be connected to another FXO equipment). * note that this chan_dahdi settings has different * meaning for FXO, where it signals polarity * reversal *detection* logic. * * It seems that sometimes we get this from * asterisk in wrong state (e.g: while ringing). * In these cases, silently ignore it. */ if (priv->lasttxhook[pos] == FXS_LINE_RING || priv->lasttxhook[pos] == FXS_LINE_OPEN) { LINE_DBG(SIGNAL, xpd, pos, "DAHDI_SETPOLARITY: %s Cannot change " "when lasttxhook=0x%X\n", (val) ? "ON" : "OFF", priv->lasttxhook[pos]); return -EINVAL; } LINE_DBG(SIGNAL, xpd, pos, "DAHDI_SETPOLARITY: %s\n", (val) ? "ON" : "OFF"); if ((val && !reversepolarity) || (!val && reversepolarity)) priv->lasttxhook[pos] |= FXS_LINE_RING; else priv->lasttxhook[pos] &= ~FXS_LINE_RING; linefeed_control(xbus, xpd, pos, priv->lasttxhook[pos]); return 0; case DAHDI_VMWI_CONFIG: if (set_vmwi(xpd, pos, arg) < 0) return -EINVAL; return 0; case DAHDI_VMWI: /* message-waiting led control */ if (get_user(val, (int __user *)arg)) return -EFAULT; if (!vmwi_ioctl) { static bool notified; if (!notified++) LINE_NOTICE(xpd, pos, "Got DAHDI_VMWI notification " "but vmwi_ioctl parameter is off. " "Ignoring.\n"); return 0; } /* Digital inputs/outputs don't have VM leds */ if (IS_SET (PHONEDEV(xpd).digital_inputs | PHONEDEV(xpd). digital_outputs, pos)) return 0; PHONEDEV(xpd).msg_waiting[pos] = val; LINE_DBG(SIGNAL, xpd, pos, "DAHDI_VMWI: %s\n", (val) ? "yes" : "no"); return 0; default: report_bad_ioctl(THIS_MODULE->name, xpd, pos, cmd); } return -ENOTTY; } static int FXS_card_open(xpd_t *xpd, lineno_t chan) { struct FXS_priv_data *priv; BUG_ON(!xpd); priv = xpd->priv; if (IS_OFFHOOK(xpd, chan)) LINE_NOTICE(xpd, chan, "Already offhook during open. OK.\n"); else LINE_DBG(SIGNAL, xpd, chan, "is onhook\n"); /* * Delegate updating dahdi to FXS_card_tick(): * The problem is that dahdi_hooksig() is spinlocking the channel and * we are called by dahdi with the spinlock already held on the * same channel. */ BIT_SET(priv->update_offhook_state, chan); return 0; } static int FXS_card_close(xpd_t *xpd, lineno_t chan) { struct FXS_priv_data *priv; BUG_ON(!xpd); LINE_DBG(GENERAL, xpd, chan, "\n"); priv = xpd->priv; priv->idletxhookstate[chan] = FXS_LINE_POL_ACTIVE; return 0; } #ifdef POLL_DIGITAL_INPUTS /* * INPUT polling is done via SLIC register 0x06 (same as LEDS): * 7 6 5 4 3 2 1 0 * +-----+-----+-----+-----+-----+-----+-----+-----+ * | I1 | I3 | | | I2 | I4 | | | * +-----+-----+-----+-----+-----+-----+-----+-----+ * */ static int input_channels[] = { 6, 7, 2, 3 }; // Slic numbers of input relays static void poll_inputs(xpd_t *xpd) { int i; BUG_ON(xpd->xbus_idx != 0); // Only unit #0 has digital inputs for (i = 0; i < ARRAY_SIZE(input_channels); i++) { __u8 pos = input_channels[i]; SLIC_DIRECT_REQUEST(xpd->xbus, xpd, pos, SLIC_READ, 0x06, 0); } } #endif static void handle_linefeed(xpd_t *xpd) { struct FXS_priv_data *priv; int i; BUG_ON(!xpd); priv = xpd->priv; BUG_ON(!priv); for_each_line(xpd, i) { if (priv->lasttxhook[i] == FXS_LINE_RING && !IS_SET(priv->neon_blinking, i)) { /* RINGing, prepare for OHT */ priv->ohttimer[i] = OHT_TIMER; priv->idletxhookstate[i] = FXS_LINE_POL_OHTRANS; } else { if (priv->ohttimer[i]) { priv->ohttimer[i]--; if (!priv->ohttimer[i]) { LINE_DBG(SIGNAL, xpd, i, "ohttimer expired\n"); priv->idletxhookstate[i] = FXS_LINE_POL_ACTIVE; oht_pcm(xpd, i, 0); vmwi_search(xpd, i, 0); if (priv->lasttxhook[i] == FXS_LINE_POL_OHTRANS) { /* Apply the change if appropriate */ linefeed_control(xpd->xbus, xpd, i, FXS_LINE_POL_ACTIVE); } } } } } } /* * Optimized memcmp() like function. Only test for equality (true/false). * This optimization reduced the detect_vmwi() runtime by a factor of 3. */ static inline bool mem_equal(const char a[], const char b[], size_t len) { int i; for (i = 0; i < len; i++) if (a[i] != b[i]) return 0; return 1; } /* * Detect Voice Mail Waiting Indication */ static void detect_vmwi(xpd_t *xpd) { struct FXS_priv_data *priv; xbus_t *xbus; static const __u8 FSK_COMMON_PATTERN[] = { 0xA8, 0x49, 0x22, 0x3B, 0x9F, 0xFF, 0x1F, 0xBB }; static const __u8 FSK_ON_PATTERN[] = { 0xA2, 0x2C, 0x1F, 0x2C, 0xBB, 0xA1, 0xA5, 0xFF }; static const __u8 FSK_OFF_PATTERN[] = { 0xA2, 0x2C, 0x28, 0xA5, 0xB1, 0x21, 0x49, 0x9F }; int i; xpp_line_t ignore_mask; BUG_ON(!xpd); xbus = xpd->xbus; priv = xpd->priv; BUG_ON(!priv); ignore_mask = PHONEDEV(xpd).offhook_state | ~(PHONEDEV(xpd).oht_pcm_pass) | ~(priv->search_fsk_pattern) | PHONEDEV(xpd).digital_inputs | PHONEDEV(xpd).digital_outputs; for_each_line(xpd, i) { struct dahdi_chan *chan = XPD_CHAN(xpd, i); __u8 *writechunk = chan->writechunk; if (IS_SET(ignore_mask, i)) continue; #if 0 if (writechunk[0] != 0x7F && writechunk[0] != 0) { int j; LINE_DBG(GENERAL, xpd, i, "MSG:"); for (j = 0; j < DAHDI_CHUNKSIZE; j++) { if (debug) printk(" %02X", writechunk[j]); } if (debug) printk("\n"); } #endif if (unlikely (mem_equal (writechunk, FSK_COMMON_PATTERN, DAHDI_CHUNKSIZE))) { LINE_DBG(SIGNAL, xpd, i, "Found common FSK pattern. " "Start looking for ON/OFF patterns.\n"); BIT_SET(priv->found_fsk_pattern, i); } else if (unlikely(IS_SET(priv->found_fsk_pattern, i))) { BIT_CLR(priv->found_fsk_pattern, i); oht_pcm(xpd, i, 0); if (unlikely (mem_equal (writechunk, FSK_ON_PATTERN, DAHDI_CHUNKSIZE))) { LINE_DBG(SIGNAL, xpd, i, "MSG WAITING ON\n"); PHONEDEV(xpd).msg_waiting[i] = 1; start_stop_vm_led(xbus, xpd, i); } else if (unlikely (mem_equal (writechunk, FSK_OFF_PATTERN, DAHDI_CHUNKSIZE))) { LINE_DBG(SIGNAL, xpd, i, "MSG WAITING OFF\n"); PHONEDEV(xpd).msg_waiting[i] = 0; start_stop_vm_led(xbus, xpd, i); } else { int j; LINE_NOTICE(xpd, i, "MSG WAITING Unexpected:"); for (j = 0; j < DAHDI_CHUNKSIZE; j++) printk(" %02X", writechunk[j]); printk("\n"); } } } } static int FXS_card_tick(xbus_t *xbus, xpd_t *xpd) { struct FXS_priv_data *priv; BUG_ON(!xpd); priv = xpd->priv; BUG_ON(!priv); #ifdef POLL_DIGITAL_INPUTS if (poll_digital_inputs && PHONEDEV(xpd).digital_inputs) { if ((xpd->timer_count % poll_digital_inputs) == 0) poll_inputs(xpd); } #endif handle_fxs_leds(xpd); handle_linefeed(xpd); /* * Hack alert (FIXME): * Asterisk did FXS_card_open() and we wanted to report * offhook state. However, the channel is spinlocked by dahdi * so we marked it in the priv->update_offhook_state mask and * now we take care of notification to dahdi and Asterisk */ if (priv->update_offhook_state) { enum dahdi_rxsig rxsig; int i; for_each_line(xpd, i) { if (!IS_SET(priv->update_offhook_state, i)) continue; rxsig = IS_OFFHOOK(xpd, i) ? DAHDI_RXSIG_OFFHOOK : DAHDI_RXSIG_ONHOOK; /* Notify after open() */ notify_rxsig(xpd, i, rxsig); BIT_CLR(priv->update_offhook_state, i); } } if (SPAN_REGISTERED(xpd)) { if (!vmwi_ioctl && priv->search_fsk_pattern) detect_vmwi(xpd); /* Detect via FSK modulation */ } return 0; } /*---------------- FXS: HOST COMMANDS -------------------------------------*/ /*---------------- FXS: Astribank Reply Handlers --------------------------*/ /* * Should be called with spinlocked XPD */ static void process_hookstate(xpd_t *xpd, xpp_line_t offhook, xpp_line_t change_mask) { xbus_t *xbus; struct FXS_priv_data *priv; int i; BUG_ON(!xpd); BUG_ON(PHONEDEV(xpd).direction != TO_PHONE); xbus = xpd->xbus; priv = xpd->priv; XPD_DBG(SIGNAL, xpd, "offhook=0x%X change_mask=0x%X\n", offhook, change_mask); for_each_line(xpd, i) { if (IS_SET(PHONEDEV(xpd).digital_outputs, i) || IS_SET(PHONEDEV(xpd).digital_inputs, i)) continue; if (IS_SET(change_mask, i)) { PHONEDEV(xpd).ringing[i] = 0; /* No more ringing... */ #ifdef WITH_METERING metering_gen(xpd, i, 0); /* Stop metering... */ #endif MARK_BLINK(priv, i, LED_GREEN, 0); /* * Reset our previous DTMF memories... */ BIT_CLR(priv->prev_key_down, i); priv->prev_key_time[i].tv_sec = priv->prev_key_time[i].tv_usec = 0L; if (IS_SET(offhook, i)) { LINE_DBG(SIGNAL, xpd, i, "OFFHOOK\n"); MARK_ON(priv, i, LED_GREEN); hookstate_changed(xpd, i, 1); } else { LINE_DBG(SIGNAL, xpd, i, "ONHOOK\n"); MARK_OFF(priv, i, LED_GREEN); hookstate_changed(xpd, i, 0); } /* * Must switch to low power. In high power, an ONHOOK * won't be detected. */ do_chan_power(xbus, xpd, i, 0); } } } HANDLER_DEF(FXS, SIG_CHANGED) { xpp_line_t sig_status = RPACKET_FIELD(pack, FXS, SIG_CHANGED, sig_status); xpp_line_t sig_toggles = RPACKET_FIELD(pack, FXS, SIG_CHANGED, sig_toggles); unsigned long flags; BUG_ON(!xpd); BUG_ON(PHONEDEV(xpd).direction != TO_PHONE); XPD_DBG(SIGNAL, xpd, "(PHONE) sig_toggles=0x%04X sig_status=0x%04X\n", sig_toggles, sig_status); #if 0 Is this needed ? for_each_line(xpd, i) { // Power down (prevent overheating!!!) if (IS_SET(sig_toggles, i)) do_chan_power(xpd->xbus, xpd, BIT(i), 0); } #endif spin_lock_irqsave(&xpd->lock, flags); process_hookstate(xpd, sig_status, sig_toggles); spin_unlock_irqrestore(&xpd->lock, flags); return 0; } #ifdef POLL_DIGITAL_INPUTS static void process_digital_inputs(xpd_t *xpd, const reg_cmd_t *info) { int i; bool offhook = (REG_FIELD(info, data_low) & 0x1) == 0; xpp_line_t lines = BIT(info->portnum); /* Sanity check */ if (!PHONEDEV(xpd).digital_inputs) { XPD_NOTICE(xpd, "%s called without digital inputs. Ignored\n", __func__); return; } /* Map SLIC number into line number */ for (i = 0; i < ARRAY_SIZE(input_channels); i++) { int channo = input_channels[i]; int newchanno; if (IS_SET(lines, channo)) { newchanno = PHONEDEV(xpd).channels - LINES_DIGI_INP + i; BIT_CLR(lines, channo); BIT_SET(lines, newchanno); /* Stop ringing. No leds for digital inputs. */ PHONEDEV(xpd).ringing[newchanno] = 0; if (offhook && !IS_OFFHOOK(xpd, newchanno)) { LINE_DBG(SIGNAL, xpd, newchanno, "OFFHOOK\n"); hookstate_changed(xpd, newchanno, 1); } else if (!offhook && IS_OFFHOOK(xpd, newchanno)) { LINE_DBG(SIGNAL, xpd, newchanno, "ONHOOK\n"); hookstate_changed(xpd, newchanno, 0); } } } } #endif static const char dtmf_digits[] = { 'D', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '*', '#', 'A', 'B', 'C' }; /* * This function is called with spinlocked XPD */ static void process_dtmf(xpd_t *xpd, uint portnum, __u8 val) { __u8 digit; bool key_down = val & 0x10; bool want_mute; bool want_event; struct FXS_priv_data *priv; struct timeval now; int msec = 0; if (!dtmf_detection) return; if (!SPAN_REGISTERED(xpd)) return; priv = xpd->priv; val &= 0xF; digit = dtmf_digits[val]; want_mute = IS_SET(priv->want_dtmf_mute, portnum); want_event = IS_SET(priv->want_dtmf_events, portnum); if (!IS_SET(priv->prev_key_down, portnum) && !key_down) LINE_NOTICE(xpd, portnum, "DTMF: duplicate UP (%c)\n", digit); if (key_down) BIT_SET(priv->prev_key_down, portnum); else BIT_CLR(priv->prev_key_down, portnum); do_gettimeofday(&now); if (priv->prev_key_time[portnum].tv_sec != 0) msec = usec_diff(&now, &priv->prev_key_time[portnum]) / 1000; priv->prev_key_time[portnum] = now; LINE_DBG(SIGNAL, xpd, portnum, "[%lu.%06lu] DTMF digit %-4s '%c' " "(val=%d, want_mute=%s want_event=%s, delta=%d msec)\n", now.tv_sec, now.tv_usec, (key_down) ? "DOWN" : "UP", digit, val, (want_mute) ? "yes" : "no", (want_event) ? "yes" : "no", msec); /* * FIXME: we currently don't use the want_dtmf_mute until * we are sure about the logic in Asterisk native bridging. * Meanwhile, simply mute it on button press. */ if (key_down && want_mute) __do_mute_dtmf(xpd, portnum, 1); else __do_mute_dtmf(xpd, portnum, 0); if (want_event) { int event = (key_down) ? DAHDI_EVENT_DTMFDOWN : DAHDI_EVENT_DTMFUP; dahdi_qevent_lock(XPD_CHAN(xpd, portnum), event | digit); } } static int FXS_card_register_reply(xbus_t *xbus, xpd_t *xpd, reg_cmd_t *info) { unsigned long flags; struct FXS_priv_data *priv; __u8 regnum; bool indirect; spin_lock_irqsave(&xpd->lock, flags); priv = xpd->priv; BUG_ON(!priv); indirect = (REG_FIELD(info, regnum) == 0x1E); regnum = (indirect) ? REG_FIELD(info, subreg) : REG_FIELD(info, regnum); XPD_DBG(REGS, xpd, "%s reg_num=0x%X, dataL=0x%X dataH=0x%X\n", (indirect) ? "I" : "D", regnum, REG_FIELD(info, data_low), REG_FIELD(info, data_high)); if (!indirect && regnum == REG_DTMF_DECODE) { __u8 val = REG_FIELD(info, data_low); process_dtmf(xpd, info->portnum, val); } #ifdef POLL_DIGITAL_INPUTS /* * Process digital inputs polling results */ else if (!indirect && regnum == REG_DIGITAL_IOCTRL) process_digital_inputs(xpd, info); #endif else if (!indirect && regnum == REG_LOOPCLOSURE) { /* OFFHOOK ? */ __u8 val = REG_FIELD(info, data_low); xpp_line_t mask = BIT(info->portnum); xpp_line_t offhook; /* * Validate reply. Non-existing/disabled ports * will reply with 0xFF. Ignore these. */ if ((val & REG_LOOPCLOSURE_ZERO) == 0) { offhook = (val & REG_LOOPCLOSURE_LCR) ? mask : 0; LINE_DBG(SIGNAL, xpd, info->portnum, "REG_LOOPCLOSURE: dataL=0x%X " "(offhook=0x%X mask=0x%X)\n", val, offhook, mask); process_hookstate(xpd, offhook, mask); } } else { #if 0 XPD_NOTICE(xpd, "Spurious register reply(ignored): " "%s reg_num=0x%X, dataL=0x%X dataH=0x%X\n", (indirect) ? "I" : "D", regnum, REG_FIELD(info, data_low), REG_FIELD(info, data_high)); #endif } /* * Update /proc info only if reply relate to the last slic * read request */ if (REG_FIELD(&xpd->requested_reply, regnum) == REG_FIELD(info, regnum) && REG_FIELD(&xpd->requested_reply, do_subreg) == REG_FIELD(info, do_subreg) && REG_FIELD(&xpd->requested_reply, subreg) == REG_FIELD(info, subreg)) { xpd->last_reply = *info; } spin_unlock_irqrestore(&xpd->lock, flags); return 0; } static int FXS_card_state(xpd_t *xpd, bool on) { BUG_ON(!xpd); XPD_DBG(GENERAL, xpd, "%s\n", (on) ? "on" : "off"); return 0; } static const struct xops fxs_xops = { .card_new = FXS_card_new, .card_init = FXS_card_init, .card_remove = FXS_card_remove, .card_tick = FXS_card_tick, .card_register_reply = FXS_card_register_reply, }; static const struct phoneops fxs_phoneops = { .card_dahdi_preregistration = FXS_card_dahdi_preregistration, .card_dahdi_postregistration = FXS_card_dahdi_postregistration, .card_hooksig = FXS_card_hooksig, .card_pcm_recompute = generic_card_pcm_recompute, .card_pcm_fromspan = generic_card_pcm_fromspan, .card_pcm_tospan = generic_card_pcm_tospan, .card_timing_priority = generic_timing_priority, .echocancel_timeslot = generic_echocancel_timeslot, .echocancel_setmask = generic_echocancel_setmask, .card_open = FXS_card_open, .card_close = FXS_card_close, .card_ioctl = FXS_card_ioctl, .card_state = FXS_card_state, }; static xproto_table_t PROTO_TABLE(FXS) = { .owner = THIS_MODULE, .entries = { /* Prototable Card Opcode */ XENTRY( FXS, FXS, SIG_CHANGED ), }, .name = "FXS", /* protocol name */ .ports_per_subunit = 8, .type = XPD_TYPE_FXS, .xops = &fxs_xops, .phoneops = &fxs_phoneops, .packet_is_valid = fxs_packet_is_valid, .packet_dump = fxs_packet_dump, }; static bool fxs_packet_is_valid(xpacket_t *pack) { const xproto_entry_t *xe; // DBG(GENERAL, "\n"); xe = xproto_card_entry(&PROTO_TABLE(FXS), XPACKET_OP(pack)); return xe != NULL; } static void fxs_packet_dump(const char *msg, xpacket_t *pack) { DBG(GENERAL, "%s\n", msg); } /*------------------------- SLIC Handling --------------------------*/ #ifdef CONFIG_PROC_FS static int proc_fxs_info_show(struct seq_file *sfile, void *not_used) { unsigned long flags; xpd_t *xpd = sfile->private; struct FXS_priv_data *priv; int i; int led; if (!xpd) return -ENODEV; spin_lock_irqsave(&xpd->lock, flags); priv = xpd->priv; BUG_ON(!priv); seq_printf(sfile, "%-12s", "Channel:"); for_each_line(xpd, i) { seq_printf(sfile, "%4d", i); } seq_printf(sfile, "\n%-12s", ""); for_each_line(xpd, i) { char *chan_type; if (IS_SET(PHONEDEV(xpd).digital_outputs, i)) chan_type = "out"; else if (IS_SET(PHONEDEV(xpd).digital_inputs, i)) chan_type = "in"; else chan_type = ""; seq_printf(sfile, "%4s", chan_type); } seq_printf(sfile, "\n%-12s", "idletxhook:"); for_each_line(xpd, i) { seq_printf(sfile, "%4d", priv->idletxhookstate[i]); } seq_printf(sfile, "\n%-12s", "lasttxhook:"); for_each_line(xpd, i) { seq_printf(sfile, "%4d", priv->lasttxhook[i]); } seq_printf(sfile, "\n%-12s", "ohttimer:"); for_each_line(xpd, i) { seq_printf(sfile, "%4d", priv->ohttimer[i]); } seq_printf(sfile, "\n%-12s", "neon_blink:"); for_each_line(xpd, i) { seq_printf(sfile, "%4d", IS_SET(priv->neon_blinking, i)); } seq_printf(sfile, "\n%-12s", "search_fsk:"); for_each_line(xpd, i) { seq_printf(sfile, "%4d", IS_SET(priv->search_fsk_pattern, i)); } seq_printf(sfile, "\n%-12s", "vbat_h:"); for_each_line(xpd, i) { seq_printf(sfile, "%4d", test_bit(i, (unsigned long *)&priv->vbat_h)); } seq_printf(sfile, "\n"); for (led = 0; led < NUM_LEDS; led++) { seq_printf(sfile, "\nLED #%d\t%-12s: ", led, "ledstate"); for_each_line(xpd, i) { if (!IS_SET(PHONEDEV(xpd).digital_outputs, i) && !IS_SET(PHONEDEV(xpd).digital_inputs, i)) seq_printf(sfile, "%d ", IS_SET(priv->ledstate[led], i)); } seq_printf(sfile, "\nLED #%d\t%-12s: ", led, "ledcontrol"); for_each_line(xpd, i) { if (!IS_SET(PHONEDEV(xpd).digital_outputs, i) && !IS_SET(PHONEDEV(xpd).digital_inputs, i)) seq_printf(sfile, "%d ", IS_SET(priv->ledcontrol[led], i)); } seq_printf(sfile, "\nLED #%d\t%-12s: ", led, "led_counter"); for_each_line(xpd, i) { if (!IS_SET(PHONEDEV(xpd).digital_outputs, i) && !IS_SET(PHONEDEV(xpd).digital_inputs, i)) seq_printf(sfile, "%d ", LED_COUNTER(priv, i, led)); } } seq_printf(sfile, "\n"); spin_unlock_irqrestore(&xpd->lock, flags); return 0; } static int proc_fxs_info_open(struct inode *inode, struct file *file) { return single_open(file, proc_fxs_info_show, PDE_DATA(inode)); } static const struct file_operations proc_fxs_info_ops = { .owner = THIS_MODULE, .open = proc_fxs_info_open, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; #ifdef WITH_METERING static ssize_t proc_xpd_metering_write(struct file *file, const char __user *buffer, size_t count, loff_t *offset) { xpd_t *xpd = file->private_data; char buf[MAX_PROC_WRITE]; lineno_t chan; int num; int ret; if (!xpd) return -ENODEV; if (count >= MAX_PROC_WRITE - 1) { XPD_ERR(xpd, "Metering string too long (%zu)\n", count); return -EINVAL; } if (copy_from_user(&buf, buffer, count)) return -EFAULT; buf[count] = '\0'; ret = sscanf(buf, "%d", &num); if (ret != 1) { XPD_ERR(xpd, "Metering value should be number. Got '%s'\n", buf); return -EINVAL; } chan = num; if (chan != PORT_BROADCAST && chan > xpd->channels) { XPD_ERR(xpd, "Metering tone: bad channel number %d\n", chan); return -EINVAL; } if ((ret = metering_gen(xpd, chan, 1)) < 0) { XPD_ERR(xpd, "Failed sending metering tone\n"); return ret; } return count; } static int proc_xpd_metering_open(struct inode *inode, struct file *file) { file->private_data = PDE_DATA(inode); } static const struct file_operations proc_xpd_metering_ops = { .owner = THIS_MODULE, .open = proc_xpd_metering_open, .write = proc_xpd_metering_write, .release = single_release, }; #endif #endif static int fxs_xpd_probe(struct device *dev) { xpd_t *xpd; xpd = dev_to_xpd(dev); /* Is it our device? */ if (xpd->type != XPD_TYPE_FXS) { XPD_ERR(xpd, "drop suggestion for %s (%d)\n", dev_name(dev), xpd->type); return -EINVAL; } XPD_DBG(DEVICES, xpd, "SYSFS\n"); return 0; } static int fxs_xpd_remove(struct device *dev) { xpd_t *xpd; xpd = dev_to_xpd(dev); XPD_DBG(DEVICES, xpd, "SYSFS\n"); return 0; } static struct xpd_driver fxs_driver = { .type = XPD_TYPE_FXS, .driver = { .name = "fxs", .owner = THIS_MODULE, .probe = fxs_xpd_probe, .remove = fxs_xpd_remove} }; static int __init card_fxs_startup(void) { int ret; if ((ret = xpd_driver_register(&fxs_driver.driver)) < 0) return ret; INFO("revision %s\n", XPP_VERSION); #ifdef POLL_DIGITAL_INPUTS INFO("FEATURE: with DIGITAL INPUTS support (polled every %d msec)\n", poll_digital_inputs); #else INFO("FEATURE: without DIGITAL INPUTS support\n"); #endif INFO("FEATURE: DAHDI_VMWI (HVAC only)\n"); #ifdef WITH_METERING INFO("FEATURE: WITH METERING Generation\n"); #else INFO("FEATURE: NO METERING Generation\n"); #endif xproto_register(&PROTO_TABLE(FXS)); return 0; } static void __exit card_fxs_cleanup(void) { xproto_unregister(&PROTO_TABLE(FXS)); xpd_driver_unregister(&fxs_driver.driver); } MODULE_DESCRIPTION("XPP FXS Card Driver"); MODULE_AUTHOR("Oron Peled "); MODULE_LICENSE("GPL"); MODULE_VERSION(XPP_VERSION); MODULE_ALIAS_XPD(XPD_TYPE_FXS); module_init(card_fxs_startup); module_exit(card_fxs_cleanup);