#! /usr/bin/perl -w
use strict;

# Make warnings fatal
local $SIG{__WARN__} = sub { die @_ };

#
# Written by Oron Peled <oron@actcom.co.il>
# Copyright (C) 2017, Xorcom
#
# All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# See the file LICENSE in the top level of this tarball.
#

#
# $Id$
#
# Data format:
#	- A comment start with ';' or '#' until the end of line
#	- Blank lines are ignored
#	- Fields are whitespace separated (spaces or tabs)
#
# The fields are (in command line order):
#	1. SLIC select in decimal (range 0-7).
#	   * is a special value which means ALL SLICS (only some registers
#	   accept settings for ALL SLICS).
#	2. Command word:
#		- RD	Read Direct register.
#		- RS	Read Sub-register.
#		- WD	Write Direct register.
#		- WS	Write Sub-register.
#	3. Register number in hexadecimal.
#	4. Low data byte in hexadecimal. (for WD and WS commands).
#	5. High data byte in hexadecimal. (for WS command only).
#
#

package main;
use File::Basename;
use Getopt::Std;

my $program = basename("$0");
my $init_dir = dirname("$0");
BEGIN { $init_dir = dirname($0); unshift(@INC, "$init_dir"); }
use XppConfig $init_dir;
my $unit_id;
my %opts;
my $eeprom_release_201 = 0;

getopts('o:', \%opts);

my %settings;
$settings{debug} = 0;
$settings{fxs_skip_calib} = 0;
my $chipregs;
my $command;
my $expander_cmd;
my $ring_registers;

sub logit {
	print STDERR "$unit_id: @_\n";
}

sub debug {
	logit @_ if $settings{debug};
}

# Arrange for error logging
if (-t STDERR) {
	$unit_id = 'Interactive';
	debug "Interactive startup";
} else {
	$unit_id = "$ENV{XBUS_NAME}/UNIT-$ENV{UNIT_NUMBER}";
	open (STDERR, "| logger -t $program -p kern.info") || die;
	debug "Non Interactive startup";
	foreach my $k (qw(
			XBUS_NAME
			XBUS_NUMBER
			XBUS_MODEL_STRING
			UNIT_NUMBER
			UNIT_TYPE
			UNIT_SUBUNITS
			UNIT_SUBUNITS_DIR
			XBUS_REVISION
			XBUS_CONNECTOR
			XBUS_LABEL)) {
		unless(defined $ENV{$k}) {
			logit "Missing ENV{$k}\n";
			die;
		}
	}
	logit "XBUS_MODEL_STRING='$ENV{XBUS_MODEL_STRING}'";
	if ($ENV{XBUS_MODEL_STRING} =~ m{.*/.*/201}) {
		$eeprom_release_201 = 1;
	}
	$chipregs = sprintf "/sys/bus/xpds/devices/%02d:%1d:0/chipregs",
		$ENV{XBUS_NUMBER}, $ENV{UNIT_NUMBER};
	$command = "/proc/xpp/$ENV{XBUS_NAME}/command";
	if(! -f $chipregs) {
		my $xpd_name = sprintf("XPD-%1d0", $ENV{UNIT_NUMBER});
		$chipregs = "/proc/xpp/$ENV{XBUS_NAME}/$xpd_name/chipregs";
		logit "OLD DRIVER: does not use /sys chipregs. Falling back to /proc"
			if -f $chipregs;
	}
	$ring_registers = sprintf "/sys/bus/xpds/devices/%02d:%1d:0/fxs_ring_registers",
		$ENV{XBUS_NUMBER}, $ENV{UNIT_NUMBER};
	logit "OLD DRIVER: missing '$ring_registers' -- fallback to hard-coded defaults"
		unless -f $ring_registers;
}

sub set_output() {
	my $output;

	if($opts{o}) {
		$output = $opts{o};
	} else {
		# No subunits in FXS (everything is subunit 0)
		$output = $chipregs;
	}
	open(REG, ">$output") || die "Failed to open '$output': $!\n";
	my $oldfh = select REG;
	main::logit "# Setting output" if $opts{o};
	return $oldfh;
}

sub mysleep($) {
	my $timeout = shift;
	select(undef,undef,undef,$timeout);
}

package FXS;

sub gen {
	my $fmt = shift;
	$| = 1;
	printf "$fmt\n", @_;
}

my @SlicNums;

sub write_to_slic_file($) {
	my $write_str = shift;

	open(SLICS,">$chipregs") or
		die("Failed writing to chipregs file $chipregs");
	print SLICS $write_str;
	close(SLICS) or die "Failed writing '$write_str' to '$chipregs': $!";
	main::mysleep(0.001);

}

sub write_to_ring_register($) {
	my $write_str = shift;

	open(SLICS,">$ring_registers") or
		die("Failed writing to ring_registers file $ring_registers");
	print SLICS $write_str;
	close(SLICS) or die "Failed writing '$write_str' to '$ring_registers': $!";
	main::mysleep(0.001);
}

sub read_reg($$$;$) {
	my $slic = shift;
	my $addr = shift;
	my $direct = shift;
	my $bits_shift = shift;
	$bits_shift = 0 unless defined $bits_shift;
	my $addr_low;
	my $addr_high;
	main::debug("read_reg: $slic, $addr, $direct");
	$addr_low = $addr & 0xFF;
	$addr_high = $addr >> 8;

	my $str;
	if ($direct eq 'D') {
		$str = sprintf "%s RD %02X",
			$slic, $addr_low;
	} else {
		$str  = sprintf "%s RR %02X %02X",
			$slic, $addr_low, $addr_high;
	}
	write_to_slic_file($str);

	my $retries = 10;
	my $reply = "";
	# If the command queue is long, we may need to wait...
WAIT_RESULTS:
	{
		my @results;

		# The time to sleep is a tradeoff:
		#   - Too long is a waste of time.
		#   - Too short will cause many retries, wastes time.
		# So the current value (after trial and error) is...
		main::mysleep(0.013);
		open(SLICS,$chipregs) or
			die("Failed reading from chipregs file $chipregs");
		while(<SLICS>){
			s/#.*//;
			next unless /\S/;
			if ($direct eq 'D') {
				@results = /^\s*(\d+)\s+[RW][DR]\s+([[:xdigit:]]+)\s+([[:xdigit:]]+)\s+([[:xdigit:]]*)/;
			} else {
				@results = /^\s*(\d+)\s+[RW][DR]\s+([[:xdigit:]]+)\s+([[:xdigit:]]+)\s+([[:xdigit:]]+)\s+([[:xdigit:]]+)\s+([[:xdigit:]]+)\s+([[:xdigit:]]*)/;
			}
			if(($direct eq 'D' && @results != 4) || ($direct eq 'R' && @results != 7)) {
				main::logit "Failed reading from '$chipregs' ($direct, $slic,$addr)";
				die;
			}
		}
		close(SLICS);
		my $read_addr;
		if ($direct eq 'D') {
			$read_addr = hex($results[1]);
		} else {
			$read_addr = hex(sprintf "0x$results[2]$results[1]");
		}
		if($results[0] ne $slic || $read_addr ne $addr) {
			# We read obsolete values, need to wait some more
			if(--$retries) {
				main::debug "$slic R$direct $addr -- retry (@results, $read_addr)";
				redo WAIT_RESULTS;
			} else {
				main::logit "Failed: $slic R$direct $addr returned @results, $addr";
				die;
			}
		}
		# Good.
		$results[0] = "";
		$results[1] = "";
		if ($direct eq 'R') {
			$results[2] = "";
		}
		foreach my $val (@results) {
			$reply = sprintf("%s%s", $val, $reply);
		}
		$reply = hex(sprintf("0x%s", $reply));

	}
	return $reply >> $bits_shift;
}

# TODO: rearange arguments
sub write_reg{#($$$) {
	my $slic = shift;
	my $reg = shift;
	my $val = shift;

	my $str  = sprintf "%s WD %02X %02X",
		$slic, $reg, $val;
	main::debug("write_reg: $slic, $reg, $val");
	write_to_slic_file($str);
}

#
# BITS:
# 3  - port num
# 1  - read/write
# 1  - Register / RAM
# 11 - address
# 29 - data
sub write_ram($$$$) {
	my $slic = shift;
	my $addr = shift;
	my $value = shift;
	my $bits_shift = shift;
	my $addr_low;
	my $addr_high;
	my $value_0;
	my $value_1;
	my $value_2;
	my $value_3;
	my $log_output = sprintf("write_ram: %s, %4d, 0x%08X", $slic, $addr, $value);
	main::debug($log_output);
	$value = $value << $bits_shift;
	$addr_low = $addr & 0xFF;
	$addr_high = $addr >> 8;

	$value_0 = $value & 0xFF;
	$value >>= 8;
	$value_1 = $value & 0xFF;
	$value >>= 8;
	$value_2 = $value & 0xFF;
	$value >>= 8;
	$value_3 = $value & 0xFF;

	my $str  = sprintf "%s WR %02X %02X %02X %02X %02X %02X",
		$slic, $addr_low, $addr_high,
		$value_0, $value_1, $value_2, $value_3;
	write_to_slic_file($str);
}

sub set_user_mode {
	my $slic = shift;
	my $on = shift;
	my $current = read_reg($slic, 0x7E, 'D');
	$current &= 0x1;
	$on &= 0x1;
	main::debug("::set_user_mode($slic, $on): " . $current . " -> " . $on . "\n");
	return 1 if $current == $on;
	write_reg($slic, 126, 0x02);
	write_reg($slic, 126, 0x08);
	write_reg($slic, 126, 0x0E);
	write_reg($slic, 126, 0x00);
	return 1;
}

sub init_early() {
	# I/O Expander initialization
	$expander_cmd = sprintf "echo 0A 00 0F %1d0 05 08 00 00 00 FF > %s",
                $ENV{UNIT_NUMBER}, $command;		# enable outputs for Greed LEDs
	system("$expander_cmd");
	$expander_cmd = sprintf "echo 0A 00 0F %1d0 05 08 01 00 AA 55 > %s",
                $ENV{UNIT_NUMBER}, $command;		# enable outputs for Red LEDs and relays
	system("$expander_cmd");
	$expander_cmd = sprintf "echo 0A 00 0F %1d0 05 08 0D 00 AA AA > %s",
                $ENV{UNIT_NUMBER}, $command;		# enable pull-ups for inputs
	system("$expander_cmd");
}

sub load_patch($) {
	my $slics_ref = shift;
	my @slics = @{ $slics_ref };
	my $slic;

	main::debug "Loading patch based on si3226x_patch_C_TSS_ISO_2014JUN18.c";
	foreach $slic (@slics) {
		FXS::set_user_mode($slic, 1);		# Turn on user mode
	}
	write_reg('*', 81, 0x00);	# JMPEN, disable the patch

	main::debug "=====Patch data======";
	my @patch_data_array = (
			141541,
			540867,
			141541,
			543427,
			141541,
			553155,
			141541,
			577731,
			141541,
			579779,
			141541,
			581315,
			141541,
			592579,
			141541,
			633027,
			141541,
			637635,
			141541,
			639683,
			141541,
			650947,
			141541,
			651459,
			141541,
			651971,
			141541,
			652483,
			141541,
			652995,
			141541,
			653507,
			736,
			491712,
			452200,
			141541,
			491200,
			5733,
			524290,
			142565,
			550083,
			3685,
			519266,
			5220,
			144098,
			550083,
			3685,
			524291,
			141541,
			551619,
			5221,
			3682,
			524292,
			5,
			141541,
			135362,
			98021,
			727745,
			474213,
			17637,
			557251,
			101093,
			557251,
			473701,
			515653,
			843365,
			188002,
			843355,
			145125,
			560835,
			524290,
			660069,
			518053,
			517224,
			518244,
			142565,
			564419,
			524288,
			521733,
			843365,
			188002,
			524315,
			145125,
			568003,
			843365,
			522850,
			523387,
			147685,
			573123,
			522363,
			145125,
			575171,
			521826,
			141541,
			575683,
			518757,
			521826,
			141541,
			575683,
			521824,
			522245,
			522338,
			141541,
			716481,
			173669,
			523845,
			141541,
			730304,
			523877,
			141541,
			690368,
			614117,
			588995,
			457221,
			558181,
			457122,
			457333,
			143077,
			588995,
			144608,
			587971,
			524292,
			141541,
			588483,
			524304,
			671746,
			558181,
			410018,
			437365,
			143586,
			100034,
			141541,
			98498,
			550117,
			619715,
			558181,
			410018,
			403061,
			143077,
			619715,
			524290,
			143589,
			608963,
			402533,
			524290,
			400901,
			29189,
			431717,
			408133,
			432741,
			406085,
			392805,
			407621,
			792165,
			405573,
			406629,
			792133,
			408677,
			431680,
			432645,
			409189,
			392785,
			402949,
			141541,
			630979,
			560741,
			400482,
			398852,
			143077,
			615107,
			402533,
			398946,
			400901,
			29186,
			400389,
			141541,
			630979,
			400997,
			262242,
			143077,
			618691,
			524291,
			400901,
			29189,
			141541,
			630979,
			558181,
			407458,
			524309,
			694789,
			558085,
			694789,
			403045,
			524290,
			143077,
			630979,
			405605,
			792133,
			408165,
			431685,
			406117,
			432709,
			407653,
			392768,
			402949,
			694789,
			560645,
			694789,
			743525,
			119426,
			141541,
			1003201,
			560741,
			524290,
			143584,
			636099,
			141541,
			191682,
			694789,
			141541,
			859842,
			171109,
			170565,
			141541,
			963776,
			524291,
			144613,
			641731,
			199685,
			667365,
			644803,
			431717,
			197189,
			136805,
			198725,
			170597,
			262242,
			524291,
			144613,
			647875,
			170501,
			667365,
			886464,
			136805,
			180293,
			141541,
			886464,
			524293,
			524293,
			524293,
			524293,
			524293,
			524293,
		);

	write_ram('*', 1358, 0x00000000, 3);		# PRAM_ADDR, reset the patch RAM address
	foreach my $val (@patch_data_array) {
		write_ram('*', 1359, $val, 12);	# PRAM_DATA, shl 12, addr auto inc
	}

	main::debug "=====Patch entries======";		# lowest 8 entries are registers
	my @patch_entries_array = (
			950,
			4347,
			3431,
			1425,
			1347,
			4287,
			4006,
			4469,
			1881,
			1720,
		);

	my $jmp_table_low = 82;
	my $jmp_table_high = 1597;
	foreach my $val (@patch_entries_array) {
		last if $val == 0;
		if ($jmp_table_low <= 97) {
			write_reg('*', $jmp_table_low, $val & 0xFF);# JMPnLO
			$jmp_table_low++;
			write_reg('*', $jmp_table_low, $val >> 8  );# JMPnHI
			$jmp_table_low++;
		} else {
			write_ram('*', $jmp_table_high, $val & 0x1FFF, 3); 	# shl 3
			$jmp_table_high++;
		}
	}

	write_ram('*', 448, 0x06182014, 3); 		# PATCH_ID, shl 3, a unique code which is a hash of the patch.

	main::debug "=====Patch support======";
	my @patch_support_addr_array = (
			800,
			795,
			799,
			798,
			794,
			787,
			786,
			782,
			892,
			893,
			925,
			926,
			1014,
			1020,
			1021,
			1022,
			333,
			334,
			352,
		);
	my @patch_support_data_array = (
			0x200000,
			0x7D80000,
			0x69580EA,
			0x82C58C,
			0x1500000,
			0x0,
			0x320000,
			0x0,
			0x400000,
			0x0,
			0xA00000,
			0x1F00000,
			0x2D8000,
			0x0,
			0x2075F60,
			0x220335B,
			0x0,
			0x0,
			0x0,
		);
	for (my $i = 0; $i < @patch_support_addr_array; $i++) {
		my $addr = $patch_support_addr_array[$i];
		my $val = $patch_support_data_array[$i];
		write_ram('*', $addr, $val, 3);
	}

	if ($settings{debug}) {
		foreach $slic (@slics) {
			main::debug "=====Verify patch=======";
			my $read_val;
			# PRAM_ADDR, reset the patch RAM address:
			write_ram($slic, 1358, 0x00000000, 3);
			foreach my $val (@patch_data_array) {
				# PRAM_DATA, shr 12, addr auto inc
				$read_val = read_reg($slic, 1359, 'R', 12);
				if ($val != $read_val) {
					printf "0x%X =? 0x%X\n", $val, $read_val;
					printf "patch verification failed\n";
					exit 0;
				}
			}
			main::debug "Patch has been verified!";

			main::debug "=====Verify patch entries=======";
			$jmp_table_low = 82;
			$jmp_table_high = 1597;
			foreach my $val (@patch_entries_array) {
				last if $val == 0;
				if ($jmp_table_low <= 97) {
					$read_val = read_reg($slic, $jmp_table_low, 'D');# JMPnLO
					$jmp_table_low++;
					$read_val |= read_reg($slic, $jmp_table_low, 'D') << 8;# JMPnHI
					$jmp_table_low++;
				} else {
					$read_val = read_reg($slic, $jmp_table_high, 'R', 3);	# PRAM_DATA, shr 3
					$read_val &= 0x1FFF;
					$jmp_table_high++;
				}
				if ($val != $read_val) {
					printf "0x%X =? 0x%X\n", $val, $read_val;
					printf "patch entries verification failed\n";
					exit 0;
				}
			}
			main::debug "Patch entries has been verified!";

			main::debug "=====Verify patch support=======";
			for (my $i = 0; $i < @patch_support_addr_array; $i++) {
				my $addr = $patch_support_addr_array[$i];
				my $val = $patch_support_data_array[$i];
				$read_val = read_reg($slic, $addr, 'R', 3);
				if ($val != $read_val) {
					printf "0x%X =? 0x%X\n", $val, $read_val;
					printf "Patch support verification failed\n";
					exit 0;
				}
			}
		main::debug "patch support has been verified!";
		}
	}

	write_reg('*', 81, 0x01);			# JMPEN, enable the patch
	write_reg('*', 05, 0x00);			# RAM_ADDR_HI, back to normal RAM access
	foreach $slic (@slics) {
		FXS::set_user_mode($slic, 0);			# Turn off user mode
	}
}

sub load_general_params($) {
	my $slics_ref = shift;
	my @slics = @{ $slics_ref };
	my $slic;

	main::debug "Loading patch based on si3226x_patch_C_TSS_ISO_2014JUN18.c";
	foreach $slic (@slics) {
		FXS::set_user_mode($slic, 1);		# Turn on user mode
	}

	write_reg('*', 47, 0x00);		# ENHANCE
	write_reg('*', 80, 0x2F);		# AUTO

	write_ram('*',  764, 0x0050C480, 3);	#BAT_HYST
	# Ringing parameters 65Vrms 0Vdc 20Hz LPR
	# Loop = 500.0 ft @ 0.044 ohms/ft, REN = 5, Rcpe = 600 ohms
	# Rprot = 30 ohms, Type = LPR, Waveform = SINE
	write_ram('*',  637, 0x15E5200E, 3);	#ringing impedance = 100 ohms
	write_ram('*',  766, 0xA3D705, 3);	#VBATL_EXPECT 10 V
	write_ram('*',  767, 0xA3D705, 3);	#VBATH_EXPECT 10 V
	write_ram('*',  768, 0x5ED285F, 3);	#VBATR_EXPECT 92.6 V
	write_ram('*',  768, 0xFFF0000, 3);	#PWRSAVE_TIMER
	write_ram('*',  916, 0x0F5C28F, 3);	#OFFHOOK_THRESH
	write_ram('*',  919, 0x00F00000, 3);	#VBAT_TRACK_MIN
	write_ram('*',  920, 0x02000000, 3);	#VBAT_TRACK_MIN_RNG
	write_ram('*',  970, 0x00800000, 3);	#THERM_DBI

	write_ram('*', 1004, 0x00F18900, 3);	#DCDC_VERR
	write_ram('*', 1005, 0x0080C480, 3);	#DCDC_VERR_HYST
	write_ram('*', 1006, 0x00800000, 3);	#DCDC_OITHRESH_LO
	write_ram('*', 1007, 0x01F00000, 3);	#DCDC_OITHRESH_HI
	write_ram('*', 1540, 0x00200000, 3);	#PD_UVLO
	write_ram('*', 1541, 0x00300000, 3);	#PD_OVLO
	write_ram('*', 1542, 0x00200000, 3);	#PD_OCLO

	write_ram('*', 1545, 0x00C00000, 3);	#DCDC_UVHYST, (94v - 90v -1) / 0.257v = 12
	write_ram('*', 1546, 0x03D00000, 3);	#DCDC_UVTHRESH, 94v / 1.543v = 61
	write_ram('*', 1547, 0x1200000, 3);	#DCDC_OVTHRESH

	write_ram('*', 1554, 0x07700000, 3);  #DCDC_UVPOL

	write_ram('*', 1558, 0x00000000, 3);	#DCDC_VREF_CTRL
	write_ram('*', 1560, 0x00200000, 3);	#DCDC_RNGTYPE
	write_ram('*', 1585, 0x00300000, 3);	#DCDC_ANA_GAIN
	write_ram('*', 1586, 0x00300000, 3);	#DCDC_ANA_TOFF
	write_ram('*', 1587, 0x00100000, 3);	#DCDC_ANA_TONMIN
	write_ram('*', 1588, 0x00FFC000, 3);	#DCDC_ANA_TONMAX
	write_ram('*', 1589, 0x00F00000, 3);	#DCDC_ANA_DSHIFT
	write_ram('*', 1590, 0x0FDA4000, 3);	#DCDC_ANA_LPOLY

	write_ram('*', 759, 0x07FEB800, 3);	# COEF_P_HVIC
	write_ram('*', 756, 0x0048D15B, 3);	# P_TH_HVIC

	write_ram('*', 967, 0x03A2E8BA, 3);	# SCALE_KAUDIO

	#             /* GC RAM locations that moved from RevB to RevC */
	write_ram('*', 1018, 0x03000000, 3);	# LKG_OFHK_OFFSET
	write_ram('*', 1017, 0x05000000, 3);	# LKG_LB_OFFSET
	write_ram('*', 1013, 0x02200000, 3);	# VBATH_DELTA
	write_ram('*', 1012, 0x03700000, 3);	# UVTHRESH_MAX
	write_ram('*', 1011, 0x04F80200, 3);	# UVTHRESH_SCALE
	write_ram('*', 1010, 0x00A23000, 3);	# UVTHRESH_BIAS

	# /* Hardcoded mods to default settings */
	write_reg('*',   98, 0x80);		#PDN
	write_ram('*', 626, 0x723F235, 3);	# ROW0_C2
	write_ram('*', 627, 0x57A9804, 3);	# ROW1_C2
	write_ram('*', 918, 0x36000, 3);	# XTALK_TIMER
	write_ram('*', 1616, 0x1100000, 3);	# DCDC_CPUMP_LP_MASK

	#/* Smart VOV Default Settings - set here in case no ring preset is loaded */
	write_ram('*', 973, 0xFFFFFF, 3);	# VOV_DCDC_SLOPE
	write_ram('*', 974, 0xA18937, 3);	# VOV_DCDC_OS
	write_ram('*', 975, 0xE49BA5, 3);	# VOV_RING_BAT_MAX

	write_ram('*', 516, 0x10038D, 3);	# VDIFFLPF
	write_ram('*', 513, 0x4EDDB9, 3);	# ILOOPLPF
	write_ram('*', 514, 0x806D6, 3);	# ILONGLPF
	write_ram('*', 517, 0x10059F, 3);	# VCMLPF
	write_ram('*', 708, 0xF0000, 3);	# CM_SPEEDUP_TIMER
	write_ram('*', 709, 0x106240, 3);	# VCM_TH

	# /* Prevent Ref Osc from powering down in PLL Freerun mode (pd_ref_osc) */
#	write_ram('*', 709, 0x106240, 3);	# PWRSAVE_CTRL_LO shall be arithmetic here

	# batType == VCM_HYST
	write_ram('*', 1565, 0xC00000, 3);	#
	write_ram('*',  750, 0x0306280, 3);	#VCM_HYST
	write_ram('*',  971, 0x2A00000, 3);	#LPR_SCALE
	write_ram('*',  972, 0x061EB80, 3);	#LPR_CM_OS
	write_ram('*', 1565, 0x0A00000, 3);	#DCDC_OIMASK
	write_ram('*', 1643, 0x000000, 3);	#DCDC_OV_DEBOUNCE
	write_ram('*', 1641, 0x0D00000, 3);	#DCDC_UV_DEBOUNCE

	write_ram('*', 1512, 0x00200000, 3);	# PD_OFFLD_DAC
	write_ram('*', 1513, 0x00200000, 3);	# PD_OFFLD_GM
	write_ram('*', 1592, 0x0300000, 3);	#DCDC_PD_ANA
	write_ram('*',  897, 0x0480CBF, 3);	#P_TH_OFFLOAD

	write_reg('*',   35, 0x03);		#OFFLOAD

	write_ram('*', 1553, 0x00000000, 3);	#DCDC_SWDRV_POL
	write_ram('*',  860, 0x008B9ACA, 3);	# IRING_LIM (90.000 mA)

	foreach $slic (@slics) {
		FXS::set_user_mode($slic, 0);		# Turn on user mode
	}

# Loading Coeff before cal to ensure accurate zsynth results in OHT
# This set of coefficients are for the following input parameters:
# Device = Si3217x, R1 = 600, R2 = 0, C = 0, R_surge = 20, R_fuse = 24, 10.txt
# Generated on 9/30/2009 2:51:17 PM
	# TXACEQ
	write_ram('*',  540, 0x07F55480, 3);	#TXACEQ_CO
	write_ram('*',  541, 0x000D6400, 3);	#TXACEQ_C1
	write_ram('*',  542, 0x00011A00, 3);	#TXACEQ_C2
	write_ram('*',  543, 0x1FFD7F00, 3);	#TXACEQ_C3

	# RXACEQ
	write_ram('*',  546, 0x07F04900, 3);	#RXACEQ_CO
	write_ram('*',  547, 0x00126A00, 3);	#RXACEQ_C1
	write_ram('*',  548, 0x1FFE1D00, 3);	#RXACEQ_C2
	write_ram('*',  549, 0x1FFC9480, 3);	#RXACEQ_C3

	# ECFIR/ECIIR
	write_ram('*',  563, 0x0012A580, 3);	#ECFIR_C2
	write_ram('*',  564, 0x1FE59900, 3);	#ECFIR_C3
	write_ram('*',  565, 0x01BCB180, 3);	#ECFIR_C4
	write_ram('*',  566, 0x00790780, 3);	#ECFIR_C5
	write_ram('*',  567, 0x02113380, 3);	#ECFIR_C6
	write_ram('*',  568, 0x1F172380, 3);	#ECFIR_C7
	write_ram('*',  569, 0x00805080, 3);	#ECFIR_C8
	write_ram('*',  570, 0x1FD6E600, 3);	#ECFIR_C9
	write_ram('*',  571, 0x1FFDF800, 3);	#ECIIR_B0
	write_ram('*',  572, 0x00010980, 3);	#ECIIR_B1
	write_ram('*',  573, 0x0E46D280, 3);	#ECIIR_A1
	write_ram('*',  574, 0x19B4F900, 3);	#ECIIR_A2

	# ZSYNTH
	write_ram('*',  653, 0x007A8C00, 3);	#ZSYNTH_B0
	write_ram('*',  654, 0x1F0BB880, 3);	#ZSYNTH_B1
	write_ram('*',  655, 0x0079BD00, 3);	#ZSYNTH_B2
	write_ram('*',  656, 0x0FF66D00, 3);	#ZSYNTH_A1
	write_ram('*',  657, 0x18099080, 3);	#ZSYNTH_A2

	write_reg('*',   45, 0x59);		#RA

	# TXGAIN/RXGAIN
	write_ram('*',  544, 0x08769A80, 3);	#TXACGAIN
	write_ram('*',  545, 0x0141E080, 3);	#RXACGAIN
	write_ram('*',  906, 0x0141E080, 3);	#RXACGAIN_SAVE

	# RXACHPF
	write_ram('*',  658, 0x07AC0400, 3);	#RXACHPF_B0_1
	write_ram('*',  659, 0x1853FC80, 3);	#RXACHPF_B1_1
	write_ram('*',  660, 0x07580880, 3);	#RXACHPF_A1_1

	write_ram('*',  666, 0x8000000, 3);	#RXACHPF_GAIN

	foreach $slic (@slics) {
		FXS::set_user_mode($slic, 1);		# Turn on user mode
	}
	write_reg('*', 98, 0x80);			# Power up MADC
	foreach $slic (@slics) {
		FXS::set_user_mode($slic, 0);			# Turn off user mode
	}
}

sub calibrate_slics($$$) {
	my $cal0 = shift;
	my $cal1 = shift;
	my $cal2 = shift;

	main::debug "Calibrating channels @SlicNums";
	write_reg('*', 26, $cal0);		# CAL0
	write_reg('*', 27, $cal1);		# CAL1
	write_reg('*', 28, $cal2);		# CAL2
	write_reg('*', 29, 0x80);		# CAL3, CAL_EN

	# wait until all slics have finished calibration, or for timeout
	# time periods in seconds:
	my $sleep_time = 0.001;
	my $timeout_time = 0.600; # Maximum from the spec
	my @curr_slics = @SlicNums;
	my $sleep_cnt = 0;
CALIB_LOOP:
	while(1) {
		main::mysleep($sleep_time);
		my @next_slics;
		for my $slic (@curr_slics) {
			my $val = read_reg($slic, 29, 'D');
			main::debug("checking slic $slic: $val.");
			push(@next_slics, $slic) if ($val & 0x80) != 0;
		}
		@curr_slics = @next_slics;
		last unless @curr_slics;
		if ($sleep_cnt * $sleep_time > $timeout_time) {
			main::logit("Auto Calibration: Exiting on timeout: $timeout_time.");
			last CALIB_LOOP;
		}
		main::debug("auto_calibrate not done yet($sleep_cnt): @curr_slics");
		$sleep_cnt++;
	}
	#log_calib_params();

}

sub dc_powerup($) {
	my $slics_ref = shift;
	my @slics = @{ $slics_ref };

	foreach my $slic (@slics) {
		FXS::set_user_mode($slic, 1);	# Turn on user mode
	}
	write_ram('*', 1538, 0x700000, 3);	# PD_DCDC, In case OV or UV previously occurred
#	write_ram('*', 1555, 0x100000, 3);	# DCDC_CPUMP, Turn on charge pump
	main::mysleep(0.010);
#	write_ram('*', 1538, 0x00600000, 3);	# start up converter
	main::mysleep(0.500);
	write_ram('*', 1555, 0x000000, 3);	# DCDC_CPUMP, Turn off charge pump
	write_ram('*', 1542, 0x300000, 3);	# PD_OCLO
	write_ram('*', 1551, 0x00000000, 3);	# sClear DCDC status
	main::mysleep(0.030);
	write_ram('*', 1538, 0x00400000, 3);
	foreach my $slic (@slics) {
		FXS::set_user_mode($slic, 0);	# Turn off user mode
	}
}

sub read_defaults() {
	if(XppConfig::read_config(\%settings)) {
		main::logit "Defaults from $settings{xppconf}";
	} else {
		main::logit "No defaults file, use hard-coded defaults.";
	}
}

sub soft_reset() {
	write_reg('*', 1, 0x03);		# RESET
}

# Try to identify which slics are valid
sub check_slics() {
	my @slics;
	main::debug "check_slics()";
	foreach my $slic (0 .. 7) {
		my $value = read_reg($slic, 0, 'D');
		#main::logit sprintf "Slic($slic): RD 00 0x%X\n", $value;
		next if($value != 0xC3);
		write_reg($slic, 14, 0x40);
		$value = read_reg($slic, 14, 'D');
		#main::logit sprintf "Slic($slic): RD 14 0x%X\n", $value;
		next if($value != 0x40);
		$value = read_reg($slic, 3, 'D') & 0x1F;
		#main::logit sprintf "Slic($slic): RD 03 0x%X\n", $value;
		push(@slics, $slic) if $value == 0x1F;
	}
	main::logit "Found " . scalar(@slics) . " SLICS (@slics)";
	return @slics;
}

sub load_custom_preset($) {
	my $slics_ref = shift;
	my @slics = @{ $slics_ref };
	my $slic;

	main::debug "Loading patch based on si3226x_patch_C_TSS_ISO_2014JUN18.c";
	foreach $slic (@slics) {
		FXS::set_user_mode($slic, 1);		# Turn on user mode
	}
	write_ram('*',  755, 0x00050000, 3);	#RTPER
	write_ram('*',  844, 0x7EFE000, 3);	#RINGFR = 20Hz
	write_ram('*',  845, 0x00208847, 3);	#RINGAMP = 53 Vrms open circuit with 100ohm ring impedance
	write_ram('*',  846, 0x00000000, 3);	#RINGPHAS
	write_ram('*',  843, 0x00000000, 3);	#RINGOF
	write_ram('*',  637, 0x15E5200E, 3);	#SLOPE_RING (100.000 ohms)
	write_ram('*',  848, 0x007B9068, 3);	#RTACTH (68.236 mA)
	write_ram('*',  847, 0x0FFFFFFF, 3);	#RTDCTH (450.000 mA) */
	write_ram('*',  850, 0x00006000, 3);	#RTACDB (75.000 ms)
	write_ram('*',  849, 0x00006000, 3);	#RTDCDB (75.000 ms)
	write_ram('*',  753, 0x00C49BA0, 3);	# VOV_RING_BAT (12.000 v)
	write_ram('*',  896, 0x00000000, 3);	# VOV_RING_GND (0.000 v)
	write_ram('*',  975, 0xE49BA5, 3);#vov_ring_bat_max = ~14V

	write_reg('*',   39, 0x80);		#RINGTALO
	write_reg('*',   40, 0x3E);		#RINGTAHI
	write_reg('*',   41, 0x00);		#RINGTILO
	write_reg('*',   42, 0x7D);		#RINGTIHI
	write_reg('*',   38, 0x80);		#RINGCON Both timers are disabled; enable LPR
	write_ram('*',  483, 0x28C000, 3);#delta_vcm: This means ring side needs 2v extra.
	write_ram('*',  973, 0xFFFFFF, 3);# slope_vov_dcdc
	write_ram('*',  974, 0xA18937, 3);# vov_dcdc_os = ~10v
	write_ram('*',  509, 0x00C49BA0, 3);# VOV_RING_BAT (12.000 v)
	write_ram('*',  975, 0xE49BA5, 3);#vov_ring_bat_max = ~14V
	write_ram('*',  971, 0x2A00000, 3);# scale for LPR amplitude, full scale 28-bit
	write_ram('*',  972, 0x61EB80, 3);# 6v CM offset
	write_ram('*',  970, 0x800000, 3);#


# DC_FEED:
	write_ram('*', 634, 0x1C8A024C, 3); 	# SLOPE_VLIM
	write_ram('*', 635, 0x1E3081AA, 3); 	# SLOPE_RFEED
	write_ram('*', 636, 0x0040A0E0, 3); 	# SLOPE_ILIM
	write_ram('*', 638, 0x1B27130B, 3); 	# SLOPE_DELTA1
	write_ram('*', 639, 0x1DD87A3E, 3); 	# SLOPE_DELTA2
#	write_ram('*', 640, 0x043AA4A6, 3);	# V_VLIM (36.000 v)
	write_ram('*', 640, 0x034A1036, 3);	# V_VLIM (28.000 v)
	write_ram('*', 641, 0x03A446AC, 3); 	# V_RFEED (31.000 v)
	write_ram('*', 642, 0x034A0E48, 3); 	# V_ILIM  (28.000 v)
	write_ram('*', 643, 0x01363429, 3); 	# CONST_RFEED (15.000 mA)
	write_ram('*', 644, 0x005D0FA6, 3); 	# CONST_ILIM = 20 mA
	write_ram('*', 645, 0x00222A30, 3);	# I_VLIM = 0.000 mA
	write_ram('*', 853, 0x005B0AFB, 3);	# LCRONHK (10.000 mA)
	write_ram('*', 852, 0x006D4060, 3);	# LCROFFHK (12.000 mA)
	write_ram('*', 701, 0x00008000, 3);	# LCRDBI (5.000 ms)
	write_ram('*', 858, 0x0048D595, 3);	# LONGHITH (8.000 mA)
	write_ram('*', 859, 0x003FBAE2, 3);	# LONGLOTH (7.000 mA)
	write_ram('*', 702, 0x00008000, 3);	# LONGDBI (5.000 ms)
	write_ram('*', 854, 0x000F0000, 3);	# LCRMASK (150.000 ms)
	write_ram('*', 855, 0x00080000, 3);	# LCRMASK_POLREV (80.000 ms)
	write_ram('*', 856, 0x00140000, 3);	# LCRMASK_STATE (200.000 ms)
	write_ram('*', 857, 0x00140000, 3);	# LCRMASK_LINECAP (200.000 ms)
	write_ram('*', 748, 0x01BA5E35, 3);	# VCM_OH (27.000 v)
	write_ram('*', 752, 0x0051EB85, 3);	# VOV_BAT (5.000 v)
	write_ram('*', 751, 0x00415F45, 3);	# VOV_GND (3.990 v)

	write_reg('*', 46, 0x04);	# zcal_en
	write_reg('*', 23, 0x10);	# DTMF_EN = 1  Enable Interupts in IRQ2 Register 19
	write_reg('*', 24, 0x03);	# P_HVIC_IE = 1, P_THERM_IE = 1  Enable Interupts in IRQ3 Register 20

	write_reg('*', 66, 0x00);	# USERSTAT
	write_reg('*', 71, 0x00);	# DIAG1
	write_ram('*', 799, 95 * 1074 * 1000, 3);    #PRAM_VBATH_NEON = -95 V
	write_ram('*', 786, 70 * 65536, 3);    #PRAM_LCRMASK_MWI = 70 mSec

	foreach $slic (@slics) {
		FXS::set_linefeed($slic, 1);
	}
	write_ram('*', 918, 0x36000, 3);

	foreach $slic (@slics) {
		FXS::set_user_mode($slic, 1);		# Turn on user mode
	}
	write_ram('*', 1018, 0x03000000, 3);	# LKG_OFHK_OFFSET
	write_ram('*', 1017, 0x05000000, 3);	# LKG_LB_OFFSET

	foreach $slic (@slics) {
		if (($slic & 0x01) == 0) {
			FXS::set_linefeed($slic, 0);
			write_ram($slic, 1538, 0x00600000, 3);
		} else {
			write_ram($slic & 0xFE, 1538, 0x00400000, 3);
		}
		FXS::set_user_mode($slic, 0);		# Turn off user mode
	}
}

sub configure_pcm($) {
	my $slic = shift;
	main::debug "Configure_pcm()";
	my $pcm_offset = $slic * 8;
	write_reg($slic, 12, $pcm_offset);	#PCMTXLO
	write_reg($slic, 13, 0x00);		#PCMTXHI
	write_reg($slic, 14, $pcm_offset);	#PCMTXLO
	write_reg($slic, 15, 0x00);		#PCMTXHI

	write_reg($slic, 11, 0x11);		#PCMMODE, u-Law

#	write_reg($slic, 43, 0x00);		#LOOPBACK
#	write_reg($slic, 44, 0x00);		#DIGCON
}

sub set_linefeed($$) {
	my $slic = shift;
	my $lfd = shift;
	write_reg($slic, 30, $lfd);		#LINEFEED
}

sub overwrite_ring_registers() {
}

package main;

main::logit "Starting '$0' (@SlicNums)\n";

FXS::read_defaults();
FXS::soft_reset();
@SlicNums = FXS::check_slics();
FXS::init_early();
FXS::load_patch(\@SlicNums);
FXS::load_general_params(\@SlicNums);

if($settings{fxs_skip_calib}) {
	main::logit "==== WARNING: SKIPPED SLIC CALIBRATION =====";
} else {
	FXS::calibrate_slics(0x00, 0x00, 0x01);
	main::mysleep(0.060);
	FXS::dc_powerup(\@SlicNums);
	FXS::calibrate_slics(0x00, 0xC0, 0x18); # remaining cals (except mads, lb)
	main::mysleep(0.700);
	foreach my $slic (@SlicNums) {
		FXS::set_linefeed($slic, 0);
		FXS::set_linefeed($slic, 1);
	}
	main::mysleep(1.000);

}
FXS::load_custom_preset(\@SlicNums);
foreach my $slic (@SlicNums) {
	FXS::configure_pcm($slic);
	FXS::set_linefeed($slic, 1);
}

set_output;
while(<DATA>) {
	chomp;
	s/[#;].*$//;		# remove comments
	s/^\s+//;		# trim whitespace
	s/\s+$//;		# trim whitespace
	s/\t+/ /g;		# replace tabs with spaces (for logs)
	next unless /\S/;	# Skip empty lines
	main::debug "writing: '$_'";
	print "$_\n";
}
close REG;
FXS::overwrite_ring_registers();

main::debug "Ending '$0'";
close STDERR;
exit 0;

# ----------------------------------==== 8-channel FXS unit initialization ===-----------------------------------------

__DATA__