/* * WCB410P Quad-BRI PCI Driver * Written by Andrew Kohlsmith * * Copyright (C) 2009-2012 Digium, Inc. * All rights reserved. * */ /* * See http://www.asterisk.org for more information about * the Asterisk project. Please do not directly contact * any of the maintainers of this project for assistance; * the project provides a web site, mailing lists and IRC * channels for your use. * * This program is free software, distributed under the terms of * the GNU General Public License Version 2 as published by the * Free Software Foundation. See the LICENSE file included with * this program for more details. */ #include #include /* printk() */ #include /* error codes */ #include #include /* size_t */ #include /* O_ACCMODE */ #include #include #include /* for PCI structures */ #include #include #include #include /* dev_err() */ #include #include /* copy_*_user */ #include /* work_struct */ #include /* timer_struct */ #include #include #include #include #include "wcb4xxp.h" #ifndef BIT /* added in 2.6.24 */ #define BIT(i) (1UL << (i)) #endif #define BIT_SET(x, i) ((x) |= BIT(i)) #define BIT_CLR(x, i) ((x) &= ~BIT(i)) #define IS_SET(x, i) (((x) & BIT(i)) != 0) #define BITMASK(i) (((u64)1 << (i)) - 1) #if (DAHDI_CHUNKSIZE != 8) #error Sorry, wcb4xxp does not support chunksize != 8 #endif //#define SIMPLE_BCHAN_FIFO //#define DEBUG_LOWLEVEL_REGS /* debug __pci_in/out, not b4xxp_setreg */ #define DEBUG_GENERAL (1 << 0) /* general debug messages */ #define DEBUG_DTMF (1 << 1) /* emit DTMF detector messages */ #define DEBUG_REGS (1 << 2) /* emit register read/write, but only if the kernel's DEBUG is defined */ #define DEBUG_FOPS (1 << 3) /* emit file operation messages */ #define DEBUG_ECHOCAN (1 << 4) #define DEBUG_ST_STATE (1 << 5) /* S/T state machine */ #define DEBUG_HDLC (1 << 6) /* HDLC controller */ #define DEBUG_ALARM (1 << 7) /* alarm changes */ #define DBG (debug & DEBUG_GENERAL) #define DBG_DTMF (debug & DEBUG_DTMF) #define DBG_REGS (debug & DEBUG_REGS) #define DBG_FOPS (debug & DEBUG_FOPS) #define DBG_EC (debug & DEBUG_ECHOCAN) #define DBG_ST (debug & DEBUG_ST_STATE) #define DBG_HDLC (debug & DEBUG_HDLC) #define DBG_ALARM (debug & DEBUG_ALARM) #define DBG_SPANFILTER (BIT(bspan->port) & spanfilter) static int debug = 0; static int spanfilter = 0xFF; /* Bitmap for ports 1-8 */ #ifdef LOOPBACK_SUPPORTED static int loopback = 0; #endif static int milliwatt = 0; static int pedanticpci = 0; static int teignorered = 0; static int alarmdebounce = 500; static int persistentlayer1 = 1; static int vpmsupport = 1; static int timer_1_ms = 2000; static int timer_3_ms = 30000; static char *companding = "alaw"; #if !defined(mmiowb) #define mmiowb() barrier() #endif #define MAX_B4_CARDS 64 static struct b4xxp *cards[MAX_B4_CARDS]; static int led_fader_table[] = { 0, 0, 0, 1, 2, 3, 4, 6, 8, 9, 11, 13, 16, 18, 20, 22, 24, 25, 27, 28, 29, 30, 31, 31, 32, 31, 31, 30, 29, 28, 27, 25, 23, 22, 20, 18, 16, 13, 11, 9, 8, 6, 4, 3, 2, 1, 0, 0, }; // #define CREATE_WCB4XXP_PROCFS_ENTRY #ifdef CREATE_WCB4XXP_PROCFS_ENTRY #define PROCFS_NAME "wcb4xxp" static struct proc_dir_entry *myproc; #endif /* Expansion; right now there's just one card and all of its idiosyncrasies. */ #define FLAG_yyy (1 << 0) #define FLAG_zzz (1 << 1) struct devtype { char *desc; unsigned int flags; int ports; /* Number of ports the card has */ enum cards_ids card_type; /* Card type - Digium B410P, ... */ }; static struct devtype wcb41xp = {"Wildcard B410P", .ports = 4, .card_type = B410P}; static struct devtype wcb43xp = {"Wildcard B430P", .ports = 4, .card_type = B430P}; static struct devtype hfc2s = {"HFC-2S Junghanns.NET duoBRI PCI", .ports = 2, .card_type = DUOBRI }; static struct devtype hfc4s = {"HFC-4S Junghanns.NET quadBRI PCI", .ports = 4, .card_type = QUADBRI }; static struct devtype hfc8s = {"HFC-8S Junghanns.NET octoBRI PCI", .ports = 8, .card_type = OCTOBRI }; static struct devtype hfc2s_OV = {"OpenVox B200P", .ports = 2, .card_type = B200P_OV }; static struct devtype hfc4s_OV = {"OpenVox B400P", .ports = 4, .card_type = B400P_OV }; static struct devtype hfc8s_OV = {"OpenVox B800P", .ports = 8, .card_type = B800P_OV }; static struct devtype hfc2s_BN = {"BeroNet BN2S0", .ports = 2, .card_type = BN2S0 }; static struct devtype hfc4s_BN = {"BeroNet BN4S0", .ports = 4, .card_type = BN4S0 }; static struct devtype hfc8s_BN = {"BeroNet BN8S0", .ports = 8, .card_type = BN8S0 }; static struct devtype hfc4s_SW = {"Swyx 4xS0 SX2 QuadBri", .ports = 4, .card_type = BSWYX_SX2 }; static struct devtype hfc4s_EV = {"CCD HFC-4S Eval. Board", .ports = 4, .card_type = QUADBRI_EVAL }; #define IS_B430P(card) ((card)->card_type == B430P) #define IS_B410P(card) ((card)->card_type == B410P) #define CARD_HAS_EC(card) (IS_B410P(card) || IS_B430P(card)) static void echocan_free(struct dahdi_chan *chan, struct dahdi_echocan_state *ec); static void b4xxp_update_leds(struct b4xxp *b4); static const struct dahdi_echocan_features my_ec_features = { .NLP_automatic = 1, .CED_tx_detect = 1, .CED_rx_detect = 1, }; static const struct dahdi_echocan_ops my_ec_ops = { .echocan_free = echocan_free, }; /* * lowlevel PCI access functions * These are simply wrappers for the normal PCI access functions that the kernel provides, * except that they allow us to work around specific PCI quirks with module options. * Currently the only option supported is pedanticpci, which injects a (min.) 3us delay * after any PCI access to forcibly disable fast back-to-back transactions. * In the case of a PCI write, pedanticpci will also read from the status register, which * has the effect of flushing any pending PCI writes. */ static inline unsigned char __pci_in8(struct b4xxp *b4, const unsigned int reg) { unsigned char ret = ioread8(b4->addr + reg); #ifdef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { drv_dbg(&b4->pdev->dev, "read 0x%02x from 0x%p\n", ret, b4->addr + reg); } #endif if (unlikely(pedanticpci)) { udelay(3); } return ret; } static inline unsigned short __pci_in16(struct b4xxp *b4, const unsigned int reg) { unsigned short ret = ioread16(b4->addr + reg); #ifdef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { drv_dbg(&b4->pdev->dev, "read 0x%04x from 0x%p\n", ret, b4->addr + reg); } #endif if (unlikely(pedanticpci)) { udelay(3); } return ret; } static inline unsigned int __pci_in32(struct b4xxp *b4, const unsigned int reg) { unsigned int ret = ioread32(b4->addr + reg); #ifdef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { drv_dbg(&b4->pdev->dev, "read 0x%04x from 0x%p\n", ret, b4->addr + reg); } #endif if (unlikely(pedanticpci)) { udelay(3); } return ret; } static inline void __pci_out32(struct b4xxp *b4, const unsigned int reg, const unsigned int val) { #ifdef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { drv_dbg(&b4->pdev->dev, "writing 0x%02x to 0x%p\n", val, b4->addr + reg); } #endif iowrite32(val, b4->addr + reg); if (unlikely(pedanticpci)) { udelay(3); (void)ioread8(b4->addr + R_STATUS); } } static inline void __pci_out8(struct b4xxp *b4, const unsigned int reg, const unsigned char val) { #ifdef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { drv_dbg(&b4->pdev->dev, "writing 0x%02x to 0x%p\n", val, b4->addr + reg); } #endif iowrite8(val, b4->addr + reg); if (unlikely(pedanticpci)) { udelay(3); (void)ioread8(b4->addr + R_STATUS); } } /* * Standard I/O access functions * uses spinlocks to protect against multiple I/O accesses * DOES NOT automatically memory barrier */ static inline unsigned char b4xxp_getreg8(struct b4xxp *b4, const unsigned int reg) { unsigned int ret; unsigned long irq_flags; spin_lock_irqsave(&b4->reglock, irq_flags); #undef RETRY_REGISTER_READS #ifdef RETRY_REGISTER_READS switch (reg) { case A_Z1: case A_Z1H: case A_F2: case R_IRQ_OVIEW: case R_BERT_STA: case A_ST_RD_STA: case R_IRQ_FIFO_BL0: case A_Z2: case A_Z2H: case A_F1: case R_RAM_USE: case R_F0_CNTL: case A_ST_SQ_RD: case R_IRQ_FIFO_BL7: /* On pg 53 of the data sheet for the hfc, it states that we must * retry certain registers until we get two consecutive reads that are * the same. */ retry: ret = __pci_in8(b4, reg); if (ret != __pci_in8(b4, reg)) goto retry; break; default: #endif ret = __pci_in8(b4, reg); #ifdef RETRY_REGISTER_READS break; } #endif spin_unlock_irqrestore(&b4->reglock, irq_flags); #ifndef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { dev_dbg(&b4->pdev->dev, "read 0x%02x from 0x%p\n", ret, b4->addr + reg); } #endif return ret; } static inline unsigned int b4xxp_getreg32(struct b4xxp *b4, const unsigned int reg) { unsigned int ret; unsigned long irq_flags; spin_lock_irqsave(&b4->reglock, irq_flags); ret = __pci_in32(b4, reg); spin_unlock_irqrestore(&b4->reglock, irq_flags); #ifndef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { dev_dbg(&b4->pdev->dev, "read 0x%04x from 0x%p\n", ret, b4->addr + reg); } #endif return ret; } static inline unsigned short b4xxp_getreg16(struct b4xxp *b4, const unsigned int reg) { unsigned int ret; unsigned long irq_flags; spin_lock_irqsave(&b4->reglock, irq_flags); ret = __pci_in16(b4, reg); spin_unlock_irqrestore(&b4->reglock, irq_flags); #ifndef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { dev_dbg(&b4->pdev->dev, "read 0x%04x from 0x%p\n", ret, b4->addr + reg); } #endif return ret; } static inline void b4xxp_setreg32(struct b4xxp *b4, const unsigned int reg, const unsigned int val) { unsigned long irq_flags; #ifndef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { dev_dbg(&b4->pdev->dev, "writing 0x%02x to 0x%p\n", val, b4->addr + reg); } #endif spin_lock_irqsave(&b4->reglock, irq_flags); __pci_out32(b4, reg, val); spin_unlock_irqrestore(&b4->reglock, irq_flags); } static inline void b4xxp_setreg8(struct b4xxp *b4, const unsigned int reg, const unsigned char val) { unsigned long irq_flags; #ifndef DEBUG_LOWLEVEL_REGS if (unlikely(DBG_REGS)) { dev_dbg(&b4->pdev->dev, "writing 0x%02x to 0x%p\n", val, b4->addr + reg); } #endif spin_lock_irqsave(&b4->reglock, irq_flags); __pci_out8(b4, reg, val); spin_unlock_irqrestore(&b4->reglock, irq_flags); } /* * A lot of the registers in the HFC are indexed. * this function sets the index, and then writes to the indexed register in an ordered fashion. * memory barriers are useless unless spinlocked, so that's what these wrapper functions do. */ static void b4xxp_setreg_ra(struct b4xxp *b4, unsigned char r, unsigned char rd, unsigned char a, unsigned char ad) { unsigned long irq_flags; spin_lock_irqsave(&b4->seqlock, irq_flags); b4xxp_setreg8(b4, r, rd); wmb(); b4xxp_setreg8(b4, a, ad); mmiowb(); spin_unlock_irqrestore(&b4->seqlock, irq_flags); } static unsigned char b4xxp_getreg_ra(struct b4xxp *b4, unsigned char r, unsigned char rd, unsigned char a) { unsigned long irq_flags; unsigned char val; spin_lock_irqsave(&b4->seqlock, irq_flags); b4xxp_setreg8(b4, r, rd); wmb(); val = b4xxp_getreg8(b4, a); mmiowb(); spin_unlock_irqrestore(&b4->seqlock, irq_flags); return val; } /* This gpio register set wrapper protects bit 0 on b430 devices from being * cleared, as it's used for reset */ static void hfc_gpio_set(struct b4xxp *b4, unsigned char bits) { if (IS_B430P(b4)) { b4xxp_setreg8(b4, R_GPIO_OUT1, bits | 0x01); flush_pci(); } else { b4xxp_setreg8(b4, R_GPIO_OUT1, bits); } } /* * HFC-4S GPIO routines * * the B410P uses the HFC-4S GPIO as follows: * GPIO 8..10: output, CPLD register select * GPIO12..15: output, 1 = enable power for port 1-4 * GPI16: input, 0 = echo can #1 interrupt * GPI17: input, 0 = echo can #2 interrupt * GPI23: input, 1 = NT power module installed * GPI24..27: input, NT power module problem on port 1-4 * GPI28..31: input, 1 = port 1-4 in NT mode */ /* initialize HFC-4S GPIO. Set up pin drivers before setting GPIO mode */ static void hfc_gpio_init(struct b4xxp *b4) { unsigned long irq_flags; spin_lock_irqsave(&b4->seqlock, irq_flags); flush_pci(); mb(); /* GPIO0..7 input */ b4xxp_setreg8(b4, R_GPIO_EN0, 0x00); if (IS_B430P(b4)) b4xxp_setreg8(b4, R_GPIO_EN1, 0xf1); else b4xxp_setreg8(b4, R_GPIO_EN1, 0xf7); hfc_gpio_set(b4, 0x00); mb(); switch (b4->card_type) { case OCTOBRI: /* fall through */ case B800P_OV: /* fall through */ case BN8S0: /* GPIO0..15 S/T - HFC-8S uses GPIO8-15 for S/T ports 5-8 */ b4xxp_setreg8(b4, R_GPIO_SEL, 0x00); break; default: /* GPIO0..7 S/T, 8..15 GPIO */ b4xxp_setreg8(b4, R_GPIO_SEL, 0xf0); break; } mb(); spin_unlock_irqrestore(&b4->seqlock, irq_flags); } /* * HFC SRAM interface code. * This came from mattf, I don't even pretend to understand it, * It seems to be using undocumented features in the HFC. * I just added the __pci_in8() to ensure the PCI writes made it * to hardware by the time these functions return. */ static inline void enablepcibridge(struct b4xxp *b4) { b4xxp_setreg8(b4, R_BRG_PCM_CFG, 0x03); flush_pci(); } static inline void disablepcibridge(struct b4xxp *b4) { b4xxp_setreg8(b4, R_BRG_PCM_CFG, 0x02); flush_pci(); } /* NOTE: read/writepcibridge do not use __pci_in/out because they are using b4->ioaddr not b4->addr */ static inline unsigned char readpcibridge(struct b4xxp *b4, unsigned char address) { unsigned short cipv; unsigned char data; /* slow down a PCI read access by 1 PCI clock cycle */ b4xxp_setreg8(b4, R_CTRL, 0x4); wmb(); if (address == 0) cipv=0x4000; else cipv=0x5800; /* select local bridge port address by writing to CIP port */ iowrite16(cipv, b4->ioaddr + 4); wmb(); data = ioread8(b4->ioaddr); /* restore R_CTRL for normal PCI read cycle speed */ b4xxp_setreg8(b4, R_CTRL, 0x0); wmb(); flush_pci(); return data; } static inline void writepcibridge(struct b4xxp *b4, unsigned char address, unsigned char data) { unsigned short cipv; unsigned int datav; if (address == 0) cipv=0x4000; else cipv=0x5800; /* select local bridge port address by writing to CIP port */ iowrite16(cipv, b4->ioaddr + 4); wmb(); /* define a 32 bit dword with 4 identical bytes for write sequence */ datav = data | ( (__u32) data <<8) | ( (__u32) data <<16) | ( (__u32) data <<24); /* * write this 32 bit dword to the bridge data port * this will initiate a write sequence of up to 4 writes to the same address on the local bus * interface * the number of write accesses is undefined but >=1 and depends on the next PCI transaction * during write sequence on the local bus */ iowrite32(datav, b4->ioaddr); wmb(); flush_pci(); } /* CPLD access code, more or less copied verbatim from code provided by mattf. */ static inline void cpld_select_reg(struct b4xxp *b4, unsigned char reg) { hfc_gpio_set(b4, reg); flush_pci(); } static inline void cpld_setreg(struct b4xxp *b4, unsigned char reg, unsigned char val) { cpld_select_reg(b4, reg); enablepcibridge(b4); writepcibridge(b4, 1, val); disablepcibridge(b4); } static inline unsigned char cpld_getreg(struct b4xxp *b4, unsigned char reg) { unsigned char data; cpld_select_reg(b4, reg); enablepcibridge(b4); data = readpcibridge(b4, 1); disablepcibridge(b4); return data; } /* * echo canceller code, verbatim from mattf. * I don't pretend to understand it. */ static inline void ec_select_addr(struct b4xxp *b4, unsigned short addr) { cpld_setreg(b4, 0, 0xff & addr); cpld_setreg(b4, 1, 0x01 & (addr >> 8)); } static inline unsigned short ec_read_data(struct b4xxp *b4) { unsigned short addr; unsigned short highbit; addr = cpld_getreg(b4, 0); highbit = cpld_getreg(b4, 1); addr = addr | (highbit << 8); return addr & 0x1ff; } static unsigned char hfc_sram_read(struct b4xxp *b4) { unsigned char data; enablepcibridge(b4); data = readpcibridge(b4, 1); disablepcibridge(b4); cpld_select_reg(b4, 0); return data; } static void hfc_sram_write(struct b4xxp *b4, char data) { enablepcibridge(b4); writepcibridge(b4, 1, data); cpld_select_reg(b4, 0); disablepcibridge(b4); } static void set_dsp_address(struct b4xxp *b4, unsigned short addr, bool dir) { hfc_gpio_set(b4, 0x30); hfc_sram_write(b4, 0xff & addr); hfc_gpio_set(b4, 0x40); /* dir = 1 write */ if (dir) hfc_sram_write(b4, 0x03 & (addr >> 8)); else hfc_sram_write(b4, 0x80 | (0x03 & (addr >> 8))); } /* Read from zarlink echocan without locks */ static unsigned char __zl_read(struct b4xxp *b4, unsigned short addr) { unsigned char data; set_dsp_address(b4, addr, 0); hfc_gpio_set(b4, ((addr & 0x0400) >> 3) | 0x50); data = hfc_sram_read(b4); hfc_gpio_set(b4, 0x00); return data; } /* Write to zarlink echocan unlocked */ static void __zl_write(struct b4xxp *b4, unsigned short addr, unsigned char data) { unsigned char val; hfc_gpio_set(b4, 0x00); set_dsp_address(b4, addr, 1); hfc_sram_write(b4, data); val = ((addr & 0x0400) >> 3); val = (val | 0x50); hfc_gpio_set(b4, val); hfc_gpio_set(b4, 0x00); } /* Write to zarlink echocan locked */ static void zl_write(struct b4xxp *b4, unsigned short addr, unsigned char data) { unsigned long flags; spin_lock_irqsave(&b4->seqlock, flags); __zl_write(b4, addr, data); spin_unlock_irqrestore(&b4->seqlock, flags); } static inline unsigned char ec_read(struct b4xxp *b4, int which, unsigned short addr) { unsigned char data; unsigned long flags; spin_lock_irqsave(&b4->seqlock, flags); ec_select_addr(b4, addr); if (!which) cpld_select_reg(b4, 2); else cpld_select_reg(b4, 3); enablepcibridge(b4); data = readpcibridge(b4, 1); disablepcibridge(b4); cpld_select_reg(b4, 0); spin_unlock_irqrestore(&b4->seqlock, flags); return data; } static inline void ec_write(struct b4xxp *b4, int which, unsigned short addr, unsigned char data) { unsigned char in; unsigned long flags; spin_lock_irqsave(&b4->seqlock, flags); ec_select_addr(b4, addr); enablepcibridge(b4); if (!which) cpld_select_reg(b4, 2); else cpld_select_reg(b4, 3); writepcibridge(b4, 1, data); cpld_select_reg(b4, 0); disablepcibridge(b4); spin_unlock_irqrestore(&b4->seqlock, flags); in = ec_read(b4, which, addr); if ((in != data) && printk_ratelimit()) { dev_warn(&b4->pdev->dev, "ec_write: Wrote 0x%02x to register 0x%02x " "of VPM %d but got back 0x%02x\n", data, addr, which, in); } } #define NUM_EC 2 #define MAX_TDM_CHAN 32 static void zl_init(struct b4xxp *b4) { int i, offset; int group_addr[4] = {0x00, 0x40, 0x80, 0xc0}; if (!b4->shutdown) dev_info(&b4->pdev->dev, "Initializing Zarlink echocan\n"); /* There are 4 "groups" of echocans with two channels in each */ /* Main group control reg 0-3 */ /* Hardware Reset Sequence */ b4xxp_setreg8(b4, R_GPIO_OUT1, 0x00); udelay(100); b4xxp_setreg8(b4, R_GPIO_OUT1, 0x01); udelay(500); /* Software reset sequence */ zl_write(b4, 0x400, 0x41); zl_write(b4, 0x401, 0x01); zl_write(b4, 0x402, 0x01); zl_write(b4, 0x403, 0x01); udelay(250); zl_write(b4, 0x400, 0x40); zl_write(b4, 0x401, 0x00); zl_write(b4, 0x402, 0x00); zl_write(b4, 0x403, 0x00); udelay(500); /* Power up & Configure echo can gruops */ if (!strcasecmp(companding, "alaw")) { zl_write(b4, 0x400, 0x47); zl_write(b4, 0x401, 0x07); zl_write(b4, 0x402, 0x07); zl_write(b4, 0x403, 0x07); } else { zl_write(b4, 0x400, 0x45); zl_write(b4, 0x401, 0x05); zl_write(b4, 0x402, 0x05); zl_write(b4, 0x403, 0x05); } udelay(250); for (i = 0; i <= 3; i++) { int group = group_addr[i]; /* Control reg 1, bank A & B, channel bypass mode */ zl_write(b4, group + 0x00, 0x08); /* Control reg 1 on bank B must be written twicer as */ /* per the datasheet */ zl_write(b4, group + 0x20, 0x0a); zl_write(b4, group + 0x20, 0x0a); /* Two channels of the echocan must be set separately, one at offset 0x00 and one at offset 0x20 */ for (offset = group; offset <= (group + 0x20); offset += 0x20) { /* Control reg 2 */ zl_write(b4, offset + 0x01, 0x00); /* Flat Delay */ zl_write(b4, offset + 0x04, 0x00); /* Decay Step Size Reg */ zl_write(b4, offset + 0x06, 0x04); /* Decay Step Number */ zl_write(b4, offset + 0x07, 0x00); /* Control reg 3 */ zl_write(b4, offset + 0x08, 0xfb); /* Control reg 4 */ zl_write(b4, offset + 0x09, 0x54); /* Noise Scaling */ zl_write(b4, offset + 0x0a, 0x16); /* Noise Control */ zl_write(b4, offset + 0x0b, 0x45); /* DTDT Reg 1*/ zl_write(b4, offset + 0x14, 0x00); /* DTDT Reg 2*/ zl_write(b4, offset + 0x15, 0x48); /* NLPTHR reg 1*/ zl_write(b4, offset + 0x18, 0xe0); /* NLPTHR reg 2*/ zl_write(b4, offset + 0x19, 0x0c); /* Step Size, MU reg 1*/ zl_write(b4, offset + 0x1a, 0x00); /* Step Size, MU reg 2*/ zl_write(b4, offset + 0x1b, 0x40); /* Gains reg 1*/ zl_write(b4, offset + 0x1c, 0x44); /* Gains reg 2*/ zl_write(b4, offset + 0x1d, 0x44); } } } static void ec_init(struct b4xxp *b4) { unsigned char b; unsigned int i, j, mask; if (!CARD_HAS_EC(b4)) return; /* Short circuit to the new zarlink echocan logic */ if (IS_B430P(b4)) { zl_init(b4); return; } /* Setup GPIO */ for (i=0; i < NUM_EC; i++) { b = ec_read(b4, i, 0x1a0); dev_info(&b4->pdev->dev, "VPM %d/%d init: chip ver %02x\n", i, NUM_EC - 1, b); for (j=0; j < b4->numspans; j++) { ec_write(b4, i, 0x1a8 + j, 0x00); /* GPIO out */ ec_write(b4, i, 0x1ac + j, 0x00); /* GPIO dir */ ec_write(b4, i, 0x1b0 + j, 0x00); /* GPIO sel */ } /* Setup TDM path - sets fsync and tdm_clk as inputs */ b = ec_read(b4, i, 0x1a3); /* misc_con */ ec_write(b4, i, 0x1a3, b & ~0x02); /* Setup Echo length (512 taps) */ ec_write(b4, i, 0x022, 1); ec_write(b4, i, 0x023, 0xff); /* Setup timeslots */ ec_write(b4, i, 0x02f, 0x00); mask = 0x02020202 << (i * 4); /* Setup the tdm channel masks for all chips*/ for (j=0; j < 4; j++) ec_write(b4, i, 0x33 - j, (mask >> (j << 3)) & 0xff); /* Setup convergence rate */ b = ec_read(b4, i, 0x20); b &= 0xe0; b |= 0x12; if (!strcasecmp(companding, "alaw")) { if (DBG) dev_info(&b4->pdev->dev, "Setting alaw mode\n"); b |= 0x01; } else { if (DBG) dev_info(&b4->pdev->dev, "Setting ulaw mode"); } ec_write(b4, i, 0x20, b); if (DBG) dev_info(&b4->pdev->dev, "reg 0x20 is 0x%02x\n", b); if (DBG) { dev_info(&b4->pdev->dev, "NLP threshold is set to %d (0x%02x)\n", b, b); } /* Initialize echo cans */ for (j=0; j < MAX_TDM_CHAN; j++) { if (mask & (0x00000001 << j)) ec_write(b4, i, j, 0x00); } mdelay(10); /* Put in bypass mode */ for (j=0; j < MAX_TDM_CHAN; j++) { if (mask & (0x00000001 << j)) { ec_write(b4, i, j, 0x01); } } /* Enable bypass */ for (j=0; j < MAX_TDM_CHAN; j++) { if (mask & (0x00000001 << j)) ec_write(b4, i, 0x78 + j, 0x01); } } } /* performs a register write and then waits for the HFC "busy" bit to clear */ static void hfc_setreg_waitbusy(struct b4xxp *b4, const unsigned int reg, const unsigned int val) { /* V_BUSY is not supposed to take longer than 1us */ /* Since this func can be called with interrupts locked * we should just a regular loop, as jiffies may not update */ int TIMEOUT = 0.002 * 3000000; int x = 0; b4xxp_setreg8(b4, reg, val); while (b4xxp_getreg8(b4, R_STATUS) & V_BUSY) { if (x++ > TIMEOUT) { if (printk_ratelimit()) { dev_info(&b4->pdev->dev, "hfc_setreg_waitbusy(write 0x%02x to 0x%02x) timed out waiting for busy flag to clear!\n", val, reg); } return; } } } /* * reads an 8-bit register over over and over until the same value is read twice, then returns that value. */ static inline unsigned char hfc_readcounter8(struct b4xxp *b4, const unsigned int reg) { unsigned char r1, r2; unsigned long maxwait = 1048576; do { r1 = b4xxp_getreg8(b4, reg); r2 = b4xxp_getreg8(b4, reg); } while ((r1 != r2) && maxwait--); if (!maxwait && printk_ratelimit()) { dev_warn(&b4->pdev->dev, "hfc_readcounter8(reg 0x%02x) timed out waiting " "for data to settle!\n", reg); } return r1; } /* * reads a 16-bit register over over and over until the same value is read twice, then returns that value. */ static inline unsigned short hfc_readcounter16(struct b4xxp *b4, const unsigned int reg) { unsigned short r1, r2; unsigned long maxwait = 1048576; do { r1 = b4xxp_getreg16(b4, reg); r2 = b4xxp_getreg16(b4, reg); } while ((r1 != r2) && maxwait--); if (!maxwait && printk_ratelimit()) { dev_warn(&b4->pdev->dev, "hfc_readcounter16(reg 0x%02x) timed out waiting " "for data to settle!\n", reg); } return r1; } static inline unsigned int hfc_readcounter32(struct b4xxp *b4, const unsigned int reg) { unsigned int r1, r2; unsigned long maxwait = 1048576; do { r1 = b4xxp_getreg32(b4, reg); r2 = b4xxp_getreg32(b4, reg); } while ((r1 != r2) && maxwait--); if (!maxwait && printk_ratelimit()) { dev_warn(&b4->pdev->dev, "hfc_readcounter32(reg 0x%02x) timed out waiting " "for data to settle!\n", reg); } return r1; } /* performs a soft-reset of the HFC-4S. This is as clean-slate as you can get to a hardware reset. */ static void hfc_reset(struct b4xxp *b4) { int b, c; /* all 32 FIFOs the same size (384 bytes), channel select data flow mode, sized for internal RAM */ b4xxp_setreg8(b4, R_FIFO_MD, V_FIFO_MD_00 | V_DF_MD_CSM | V_FIFO_SZ_00); flush_pci(); /* reset everything, wait 500us, then bring everything BUT the PCM system out of reset */ b4xxp_setreg8(b4, R_CIRM, HFC_FULL_RESET); flush_pci(); udelay(500); b4xxp_setreg8(b4, R_CIRM, V_PCM_RES); flush_pci(); udelay(500); /* * Now bring PCM out of reset and do a very basic setup of the PCM system to allow it to finish resetting correctly. * set F0IO as an output, and set up a 32-timeslot PCM bus * See Section 8.3 in the HFC-4S datasheet for more details. */ b4xxp_setreg8(b4, R_CIRM, 0x00); b4xxp_setreg8(b4, R_PCM_MD0, V_PCM_MD | V_PCM_IDX_MD1); flush_pci(); if (IS_B430P(b4)) b4xxp_setreg8(b4, R_PCM_MD1, V_PLL_ADJ_00 | V_PCM_DR_4096); else b4xxp_setreg8(b4, R_PCM_MD1, V_PLL_ADJ_00 | V_PCM_DR_2048); flush_pci(); /* now wait for R_F0_CNTL to reach at least 2 before continuing */ c=10; while ((b = b4xxp_getreg8(b4, R_F0_CNTL)) < 2 && c) { udelay(100); c--; } if (!c && b < 2) { dev_warn(&b4->pdev->dev, "hfc_reset() did not get the green light from the PCM system!\n"); } } static inline void hfc_enable_fifo_irqs(struct b4xxp *b4) { b4xxp_setreg8(b4, R_IRQ_CTRL, V_FIFO_IRQ | V_GLOB_IRQ_EN); flush_pci(); } static inline void hfc_disable_fifo_irqs(struct b4xxp *b4) { b4xxp_setreg8(b4, R_IRQ_CTRL, V_GLOB_IRQ_EN); flush_pci(); } static void hfc_enable_interrupts(struct b4xxp *b4) { b4->running = 1; /* clear any pending interrupts */ b4xxp_getreg8(b4, R_STATUS); b4xxp_getreg8(b4, R_IRQ_MISC); b4xxp_getreg8(b4, R_IRQ_FIFO_BL0); b4xxp_getreg8(b4, R_IRQ_FIFO_BL1); b4xxp_getreg8(b4, R_IRQ_FIFO_BL2); b4xxp_getreg8(b4, R_IRQ_FIFO_BL3); b4xxp_getreg8(b4, R_IRQ_FIFO_BL4); b4xxp_getreg8(b4, R_IRQ_FIFO_BL5); b4xxp_getreg8(b4, R_IRQ_FIFO_BL6); b4xxp_getreg8(b4, R_IRQ_FIFO_BL7); b4xxp_setreg8(b4, R_IRQMSK_MISC, V_TI_IRQ); hfc_enable_fifo_irqs(b4); } static void hfc_disable_interrupts(struct b4xxp *b4) { b4xxp_setreg8(b4, R_IRQMSK_MISC, 0); b4xxp_setreg8(b4, R_IRQ_CTRL, 0); flush_pci(); b4->running = 0; } /* * Connects an S/T port's B channel to a host-facing FIFO through the PCM busses. * This bchan flow plan should match up with the EC requirements. * TODO: Interrupts are only enabled on the host FIFO RX side, since everything is (should be) synchronous. * *** performs no error checking of parameters *** */ static void hfc_assign_bchan_fifo_ec(struct b4xxp *b4, int port, int bchan) { int fifo, hfc_chan, ts; unsigned long irq_flags; static int first=1; if (first) { first = 0; dev_info(&b4->pdev->dev, "Hardware echo cancellation enabled.\n"); } fifo = port * 2; hfc_chan = port * 4; ts = port * 8; if (bchan) { fifo += 1; hfc_chan += 1; ts += 4; } /* record the host's FIFO # in the span fifo array */ b4->spans[port].fifos[bchan] = fifo; spin_lock_irqsave(&b4->fifolock, irq_flags); if (DBG) { dev_info(&b4->pdev->dev, "port %d, B channel %d\n\tS/T -> PCM ts %d uses HFC " "chan %d via FIFO %d\n", port, bchan, ts + 1, hfc_chan, 16 + fifo); } /* S/T RX -> PCM TX FIFO, transparent mode, no IRQ. */ hfc_setreg_waitbusy(b4, R_FIFO, ((16 + fifo) << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_110); b4xxp_setreg8(b4, A_CHANNEL, (hfc_chan << V_CH_FNUM_SHIFT)); b4xxp_setreg8(b4, R_SLOT, ((ts + 1) << V_SL_NUM_SHIFT)); b4xxp_setreg8(b4, A_SL_CFG, V_ROUT_TX_STIO1 | (hfc_chan << V_CH_SNUM_SHIFT)); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) pr_info("\tPCM ts %d -> host uses HFC chan %d via FIFO %d\n", ts + 1, 16 + hfc_chan, fifo); /* PCM RX -> Host TX FIFO, transparent mode, enable IRQ. */ hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_001); b4xxp_setreg8(b4, A_CHANNEL, ((16 + hfc_chan) << V_CH_FNUM_SHIFT) | V_CH_FDIR); b4xxp_setreg8(b4, R_SLOT, ((ts + 1) << V_SL_NUM_SHIFT) | 1); b4xxp_setreg8(b4, A_SL_CFG, V_ROUT_RX_STIO2 | ((16 + hfc_chan) << V_CH_SNUM_SHIFT) | 1); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); // b4xxp_setreg8(b4, A_IRQ_MSK, V_IRQ); if (DBG) pr_info("\thost -> PCM ts %d uses HFC chan %d via FIFO %d\n", ts, 16 + hfc_chan, fifo); /* Host FIFO -> PCM TX */ hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_001); b4xxp_setreg8(b4, A_CHANNEL, ((16 + hfc_chan) << V_CH_FNUM_SHIFT)); b4xxp_setreg8(b4, R_SLOT, (ts << V_SL_NUM_SHIFT)); b4xxp_setreg8(b4, A_SL_CFG, V_ROUT_RX_STIO2 | ((16 + hfc_chan) << V_CH_SNUM_SHIFT)); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) pr_info("\tPCM ts %d -> S/T uses HFC chan %d via FIFO %d\n", ts, hfc_chan, 16 + fifo); /* PCM -> S/T */ hfc_setreg_waitbusy(b4, R_FIFO, ((16 + fifo) << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_110); b4xxp_setreg8(b4, A_CHANNEL, (hfc_chan << V_CH_FNUM_SHIFT) | V_CH_FDIR); b4xxp_setreg8(b4, R_SLOT, (ts << V_SL_NUM_SHIFT) | V_SL_DIR); b4xxp_setreg8(b4, A_SL_CFG, V_ROUT_TX_STIO2 | (hfc_chan << V_CH_SNUM_SHIFT) | V_CH_SDIR); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) pr_info("\tPCM ts %d -> S/T uses HFC chan %d via FIFO %d\n", ts, hfc_chan, 16 + fifo); flush_pci(); /* ensure all those writes actually hit hardware */ spin_unlock_irqrestore(&b4->fifolock, irq_flags); } static void hfc_assign_fifo_zl(struct b4xxp *b4, int port, int bchan) { int fifo, hfc_chan, ts; unsigned long irq_flags; static int first = 1; if (first) { first = 0; dev_info(&b4->pdev->dev, "Zarlink echo cancellation enabled.\n"); } fifo = port * 2; hfc_chan = port * 4; ts = port * 8; if (bchan) { fifo += 1; hfc_chan += 1; ts += 4; } /* record the host's FIFO # in the span fifo array */ b4->spans[3-port].fifos[bchan] = fifo; spin_lock_irqsave(&b4->fifolock, irq_flags); if (DBG) { dev_info(&b4->pdev->dev, "port %d, B channel %d\n\tS/T -> PCM ts %d uses HFC chan %d via FIFO %d\n", port, bchan, ts + 1, hfc_chan, 16 + fifo); } /* S/T RX -> PCM TX FIFO, transparent mode, no IRQ. */ hfc_setreg_waitbusy(b4, R_FIFO, ((16 + fifo) << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_110); b4xxp_setreg8(b4, A_CHANNEL, (hfc_chan << V_CH_FNUM_SHIFT)); b4xxp_setreg8(b4, R_SLOT, (((fifo * 2)+1) << V_SL_NUM_SHIFT)); b4xxp_setreg8(b4, A_SL_CFG, V_ROUT_TX_STIO1 | (hfc_chan << V_CH_SNUM_SHIFT)); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) { pr_info("\tPCM ts %d -> host uses HFC chan %d via FIFO %d\n", ts + 1, 16 + hfc_chan, fifo); } /* PCM RX -> Host TX FIFO, transparent mode, enable IRQ. */ hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_001); b4xxp_setreg8(b4, A_CHANNEL, ((16 + hfc_chan) << V_CH_FNUM_SHIFT) | V_CH_FDIR); b4xxp_setreg8(b4, R_SLOT, (((fifo * 2) + 4) << V_SL_NUM_SHIFT) | V_SL_DIR); b4xxp_setreg8(b4, A_SL_CFG, V_ROUT_RX_STIO2 | ((16 + hfc_chan) << V_CH_SNUM_SHIFT) | V_CH_SDIR); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) { pr_info("\thost -> PCM ts %d uses HFC chan %d via FIFO %d\n", ts, 16 + hfc_chan, fifo); } /* Host FIFO -> PCM TX */ hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_001); b4xxp_setreg8(b4, A_CHANNEL, ((16 + hfc_chan) << V_CH_FNUM_SHIFT)); b4xxp_setreg8(b4, R_SLOT, ((fifo * 2) << V_SL_NUM_SHIFT)); b4xxp_setreg8(b4, A_SL_CFG, V_ROUT_TX_STIO1 | ((16 + hfc_chan) << V_CH_SNUM_SHIFT)); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) { pr_info("\tPCM ts %d -> S/T uses HFC chan %d via FIFO %d\n", ts, hfc_chan, 16 + fifo); } /* PCM -> S/T */ hfc_setreg_waitbusy(b4, R_FIFO, ((16 + fifo) << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_110); b4xxp_setreg8(b4, A_CHANNEL, (hfc_chan << V_CH_FNUM_SHIFT) | V_CH_FDIR); b4xxp_setreg8(b4, R_SLOT, (((fifo*2)+3) << V_SL_NUM_SHIFT) | V_SL_DIR); b4xxp_setreg8(b4, A_SL_CFG, V_ROUT_RX_STIO2 | (hfc_chan << V_CH_SNUM_SHIFT) | V_CH_SDIR); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) { pr_info("\tPCM ts %d -> S/T uses HFC chan %d via FIFO %d\n", ts, hfc_chan, 16 + fifo); } flush_pci(); spin_unlock_irqrestore(&b4->fifolock, irq_flags); } static void hfc_assign_bchan_fifo_noec(struct b4xxp *b4, int port, int bchan) { int fifo, hfc_chan, ts; unsigned long irq_flags; static int first=1; if (first) { first = 0; dev_info(&b4->pdev->dev, "NOTE: hardware echo cancellation has been disabled\n"); } fifo = port * 2; hfc_chan = port * 4; ts = port * 8; if (bchan) { fifo += 1; hfc_chan += 1; ts += 4; } /* record the host's FIFO # in the span fifo array */ b4->spans[port].fifos[bchan] = fifo; spin_lock_irqsave(&b4->fifolock, irq_flags); if (DBG) { dev_info(&b4->pdev->dev, "port %d, B channel %d\n\thost -> S/T " "uses HFC chan %d via FIFO %d\n", port, bchan, hfc_chan, fifo); } hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_000); b4xxp_setreg8(b4, A_CHANNEL, (hfc_chan << V_CH_FNUM_SHIFT)); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) pr_info("\tS/T -> host uses HFC chan %d via FIFO %d\n", hfc_chan, fifo); hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_HDLC_TRP | V_DATA_FLOW_000); b4xxp_setreg8(b4, A_CHANNEL, (hfc_chan << V_CH_FNUM_SHIFT) | V_CH_FDIR); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) pr_info("\tPCM ts %d -> S/T uses HFC chan %d via FIFO %d\n", ts, hfc_chan, 16 + fifo); flush_pci(); /* ensure all those writes actually hit hardware */ spin_unlock_irqrestore(&b4->fifolock, irq_flags); } /* * Connects an S/T port's D channel to a host-facing FIFO. * Both TX and RX interrupts are enabled! * *** performs no error checking of parameters *** */ static void hfc_assign_dchan_fifo(struct b4xxp *b4, int port) { int fifo, hfc_chan; unsigned long irq_flags; switch (b4->card_type) { case B800P_OV: /* fall through */ case OCTOBRI: /* fall through */ case BN8S0: /* In HFC-8S cards we can't use ports 8-11 for dchan FIFOs */ fifo = port + 16; break; default: fifo = port + 8; break; } hfc_chan = (port * 4) + 2; /* record the host's FIFO # in the span fifo array */ if (IS_B430P(b4)) b4->spans[3-port].fifos[2] = fifo; else b4->spans[port].fifos[2] = fifo; if (DBG) { dev_info(&b4->pdev->dev, "port %d, D channel\n\thost -> S/T uses HFC chan %d " "via FIFO %d\n", port, hfc_chan, fifo); } spin_lock_irqsave(&b4->fifolock, irq_flags); /* Host FIFO -> S/T TX, HDLC mode, no IRQ. */ hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_TRP_IRQ | V_DATA_FLOW_000); b4xxp_setreg8(b4, A_CHANNEL, (hfc_chan << V_CH_FNUM_SHIFT)); b4xxp_setreg8(b4, A_SUBCH_CFG, 0x02); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) pr_info("\tS/T -> host uses HFC chan %d via FIFO %d\n", hfc_chan, fifo); /* S/T RX -> Host FIFO, HDLC mode, IRQ will be enabled when port opened. */ hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); b4xxp_setreg8(b4, A_CON_HDLC, V_IFF | V_TRP_IRQ | V_DATA_FLOW_000); b4xxp_setreg8(b4, A_CHANNEL, (hfc_chan << V_CH_FNUM_SHIFT) | V_CH_FDIR); b4xxp_setreg8(b4, A_SUBCH_CFG, 0x02); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); if (DBG) pr_info("\n"); flush_pci(); /* ensure all those writes actually hit hardware */ spin_unlock_irqrestore(&b4->fifolock, irq_flags); } /* takes a read/write fifo pair and optionally resets it, optionally enabling the rx/tx interrupt */ static void hfc_reset_fifo_pair(struct b4xxp *b4, int fifo, int reset, int force_no_irq) { unsigned long irq_flags; spin_lock_irqsave(&b4->fifolock, irq_flags); hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_IRQ_MSK, (!force_no_irq && b4->fifo_en_txint & (1 << fifo)) ? V_IRQ : 0); if (reset) hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); b4xxp_setreg8(b4, A_IRQ_MSK, (!force_no_irq && b4->fifo_en_rxint & (1 << fifo)) ? V_IRQ : 0); if (reset) hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_RES_FIFO); spin_unlock_irqrestore(&b4->fifolock, irq_flags); } static void b4xxp_set_sync_src(struct b4xxp *b4, int port) { int b; if (port == -1) /* automatic */ b = 0; else b = (port & V_SYNC_SEL_MASK) | V_MAN_SYNC; b4xxp_setreg8(b4, R_ST_SYNC, b); b4->syncspan = port; } /* * Finds the highest-priority sync span that is not in alarm and returns it. * Note: the span #s in b4->spans[].sync are 1-based, and this returns * a 0-based span, or -1 if no spans are found. */ static int b4xxp_find_sync(struct b4xxp *b4) { int i, psrc, src; src = -1; /* default to automatic */ for (i=0; i < b4->numspans; i++) { if (DBG) dev_info(&b4->pdev->dev, "Checking sync pos %d, have span %d\n", i, b4->spans[i].sync); psrc = b4->spans[i].sync; if (psrc > 0 && !b4->spans[psrc - 1].span.alarms) { if (DBG) dev_info(&b4->pdev->dev, "chosen\n"); src = psrc; break; } } if (src >= 0) return src - 1; else return src; } static ssize_t b4_timing_master_show(struct device *dev, struct device_attribute *attr, char *buf) { struct b4xxp *b4 = dev_get_drvdata(dev); return sprintf(buf, "%d\n", b4->syncspan); } static DEVICE_ATTR(timing_master, 0400, b4_timing_master_show, NULL); static void create_sysfs_files(struct b4xxp *b4) { int ret; ret = device_create_file(&b4->pdev->dev, &dev_attr_timing_master); if (ret) { dev_info(&b4->pdev->dev, "Failed to create device attributes.\n"); } } static void remove_sysfs_files(struct b4xxp *b4) { device_remove_file(&b4->pdev->dev, &dev_attr_timing_master); } /* * allocates memory and pretty-prints a given S/T state engine state to it. * calling routine is responsible for freeing the pointer returned! * Performs no hardware access whatsoever, but does use GFP_KERNEL so do not call from IRQ context. * if full == 1, prints a "full" dump; otherwise just prints current state. */ static char *hfc_decode_st_state(struct b4xxp *b4, int port, unsigned char state, int full) { int nt, sta; char s[128], *str; const char *ststr[2][16] = { /* TE, NT */ { "RESET", "?", "SENSING", "DEACT.", "AWAIT.SIG", "IDENT.INPUT", "SYNCD", "ACTIVATED", "LOSTFRAMING", "?", "?", "?", "?", "?", "?", "?" }, { "RESET", "DEACT.", "PEND.ACT", "ACTIVE", "PEND.DEACT", "?", "?", "?", "?", "?", "?", "?", "?", "?", "?", "?" } }; str = kmalloc(256, GFP_ATOMIC); if (!str) { dev_warn(&b4->pdev->dev, "could not allocate mem for ST state decode string!\n"); return NULL; } nt = (b4->spans[port].te_mode == 0); sta = (state & V_ST_STA_MASK); sprintf(str, "P%d: %s state %c%d (%s)", port + 1, (nt ? "NT" : "TE"), (nt ? 'G' : 'F'), sta, ststr[nt][sta]); if (full) { sprintf(s, " SYNC: %s, RX INFO0: %s", ((state & V_FR_SYNC) ? "yes" : "no"), ((state & V_INFO0) ? "yes" : "no")); strcat(str, s); if (nt) { sprintf(s, ", T2 %s, auto G2->G3: %s", ((state & V_T2_EXP) ? "expired" : "OK"), ((state & V_G2_G3) ? "yes" : "no")); strcat(str, s); } } return str; } /* * sets an S/T port state machine to a given state. * if 'auto' is nonzero, will put the state machine back in auto mode after setting the state. */ static void hfc_handle_state(struct b4xxp_span *s); static void hfc_force_st_state(struct b4xxp *b4, int port, int state, int resume_auto) { b4xxp_setreg_ra(b4, R_ST_SEL, port, A_ST_RD_STA, state | V_ST_LD_STA); udelay(6); if (resume_auto) { b4xxp_setreg_ra(b4, R_ST_SEL, port, A_ST_RD_STA, state); } if (DBG_ST) { char *x; x = hfc_decode_st_state(b4, port, state, 1); dev_info(&b4->pdev->dev, "forced port %d to state %d (auto: %d), " "new decode: %s\n", port + 1, state, resume_auto, x); kfree(x); } /* make sure that we activate any timers/etc needed by this state change */ hfc_handle_state(&b4->spans[port]); } static void hfc_stop_st(struct b4xxp_span *s); static void hfc_start_st(struct b4xxp_span *s); /* figures out what to do when an S/T port's timer expires. */ static void hfc_timer_expire(struct b4xxp_span *s, int t_no) { struct b4xxp *b4 = s->parent; if (DBG_ST) { dev_info(&b4->pdev->dev, "%lu: hfc_timer_expire, Port %d T%d expired " "(value=%lu ena=%d)\n", b4->ticks, s->port + 1, t_no + 1, s->hfc_timers[t_no], s->hfc_timer_on[t_no]); } /* * There are four timers associated with every HFC S/T port: * T1 is used by the NT state machine, and is the maximum time the NT side * should wait for G3 (active) state. * T2 is not actually used in the driver, it is handled by the HFC-4S * internally. * T3 is used by the TE state machine; it is the maximum time the TE side should * wait for the INFO4 (activated) signal. * T4 is a special timer used for debug purposes for monitoring of L1 state * during activation attempt. */ /* First, disable the expired timer; hfc_force_st_state() may activate it again. */ s->hfc_timer_on[t_no] = 0; switch(t_no) { case HFC_T1: /* switch to G4 (pending deact.), resume auto mode */ hfc_force_st_state(b4, s->phy_port, 4, 1); break; case HFC_T2: /* switch to G1 (deactivated), resume auto mode */ hfc_force_st_state(b4, s->phy_port, 1, 1); break; case HFC_T3: /* switch to F3 (deactivated), resume auto mode */ hfc_stop_st(s); if (persistentlayer1) hfc_start_st(s); break; case HFC_T4: hfc_handle_state(s); s->hfc_timers[HFC_T4] = b4->ticks + 1000; s->hfc_timer_on[HFC_T4] = 1; break; default: if (printk_ratelimit()) { dev_warn(&b4->pdev->dev, "hfc_timer_expire found an unknown expired " "timer (%d)??\n", t_no); } } } /* * Run through the active timers on a card and deal with any expiries. * Also see if the alarm debounce time has expired and if it has, tell DAHDI. */ static void hfc_update_st_timers(struct b4xxp *b4) { int i, j; struct b4xxp_span *s; for (i=0; i < b4->numspans; i++) { s = &b4->spans[i]; for (j = HFC_T1; j < ARRAY_SIZE(s->hfc_timers); j++) { /* we don't really do timer2, it is expired by the * state change handler */ if (j == HFC_T2) continue; if (s->hfc_timer_on[j] && time_after_eq(b4->ticks, s->hfc_timers[j])) { hfc_timer_expire(s, j); } } if (s->newalarm != s->span.alarms && time_after_eq(b4->ticks, s->alarmtimer)) { s->span.alarms = s->newalarm; if ((!s->newalarm && teignorered) || (!teignorered)) { dahdi_alarm_notify(&s->span); } b4xxp_set_sync_src(b4, b4xxp_find_sync(b4)); if (DBG_ALARM) { dev_info(&b4->pdev->dev, "span %d: alarm %d " "debounced\n", i + 1, s->newalarm); } } } } /* this is the driver-level state machine for an S/T port */ static void hfc_handle_state(struct b4xxp_span *s) { struct b4xxp *b4; unsigned char state, sta; int nt, oldalarm; unsigned long oldtimer; b4 = s->parent; nt = !s->te_mode; state = b4xxp_getreg_ra(b4, R_ST_SEL, s->phy_port, A_ST_RD_STA); sta = (state & V_ST_STA_MASK); if (DBG_ST) { char *x; x = hfc_decode_st_state(b4, s->phy_port, state, 1); dev_info(&b4->pdev->dev, "port %d phy_port %d A_ST_RD_STA old=0x%02x now=0x%02x, decoded: %s\n", s->port + 1, s->phy_port, s->oldstate, state, x); kfree(x); } oldalarm = s->newalarm; oldtimer = s->alarmtimer; if (nt) { switch(sta) { default: /* Invalid NT state */ case 0x0: /* NT state G0: Reset */ case 0x1: /* NT state G1: Deactivated */ case 0x4: /* NT state G4: Pending Deactivation */ s->newalarm = DAHDI_ALARM_RED; break; case 0x2: /* NT state G2: Pending Activation */ s->newalarm = DAHDI_ALARM_YELLOW; break; case 0x3: /* NT state G3: Active */ s->hfc_timer_on[HFC_T1] = 0; s->newalarm = 0; break; } } else { switch(sta) { default: /* Invalid TE state */ case 0x0: /* TE state F0: Reset */ case 0x2: /* TE state F2: Sensing */ case 0x3: /* TE state F3: Deactivated */ case 0x4: /* TE state F4: Awaiting Signal */ case 0x8: /* TE state F8: Lost Framing */ s->newalarm = DAHDI_ALARM_RED; break; case 0x5: /* TE state F5: Identifying Input */ case 0x6: /* TE state F6: Synchronized */ s->newalarm = DAHDI_ALARM_YELLOW; break; case 0x7: /* TE state F7: Activated */ s->hfc_timer_on[HFC_T3] = 0; s->hfc_timer_on[HFC_T4] = 0; s->newalarm = 0; break; } } s->alarmtimer = b4->ticks + alarmdebounce; s->oldstate = state; if (DBG_ALARM) { dev_info(&b4->pdev->dev, "span %d: old alarm %d expires %ld, new alarm %d expires %ld\n", s->port + 1, oldalarm, oldtimer, s->newalarm, s->alarmtimer); } /* we only care about T2 expiry in G4. */ if (nt && (sta == 4) && (state & V_T2_EXP)) { if (s->hfc_timer_on[HFC_T2]) hfc_timer_expire(s, HFC_T2); /* handle T2 expiry */ } /* If we're in F3 and receiving INFO0, start T3 and jump to F4 */ if (!nt && (sta == 3) && (state & V_INFO0)) { if (persistentlayer1) { s->hfc_timers[HFC_T3] = b4->ticks + timer_3_ms; s->hfc_timer_on[HFC_T3] = 1; if (DBG_ST) { dev_info(&b4->pdev->dev, "port %d: receiving INFO0 in state 3, " "setting T3 and jumping to F4\n", s->port + 1); } hfc_start_st(s); } } } static void hfc_stop_all_timers(struct b4xxp_span *s) { s->hfc_timer_on[HFC_T4] = 0; s->hfc_timer_on[HFC_T3] = 0; s->hfc_timer_on[HFC_T2] = 0; s->hfc_timer_on[HFC_T1] = 0; } static void hfc_stop_st(struct b4xxp_span *s) { struct b4xxp *b4 = s->parent; hfc_stop_all_timers(s); b4xxp_setreg_ra(b4, R_ST_SEL, s->phy_port, A_ST_WR_STA, V_ST_ACT_DEACTIVATE); } /* * resets an S/T interface to a given NT/TE mode */ static void hfc_reset_st(struct b4xxp_span *s) { int b; struct b4xxp *b4; b4 = s->parent; hfc_stop_st(s); /* force state G0/F0 (reset), then force state 1/2 (deactivated/sensing) */ b4xxp_setreg_ra(b4, R_ST_SEL, s->phy_port, A_ST_WR_STA, V_ST_LD_STA); flush_pci(); /* make sure write hit hardware */ s->span.alarms = DAHDI_ALARM_RED; s->newalarm = DAHDI_ALARM_RED; dahdi_alarm_notify(&s->span); udelay(10); /* set up the clock control register. Must be done before we activate the interface. */ if (s->te_mode) b = 0x0e; else b = 0x0c | (6 << V_ST_SMPL_SHIFT); b4xxp_setreg8(b4, A_ST_CLK_DLY, b); /* set TE/NT mode, enable B and D channels. */ b4xxp_setreg8(b4, A_ST_CTRL0, V_B1_EN | V_B2_EN | (s->te_mode ? 0 : V_ST_MD)); b4xxp_setreg8(b4, A_ST_CTRL1, V_G2_G3_EN | V_E_IGNO); b4xxp_setreg8(b4, A_ST_CTRL2, V_B1_RX_EN | V_B2_RX_EN); /* enable the state machine. */ b4xxp_setreg8(b4, A_ST_WR_STA, 0x00); flush_pci(); udelay(100); } static void hfc_start_st(struct b4xxp_span *s) { struct b4xxp *b4 = s->parent; b4xxp_setreg_ra(b4, R_ST_SEL, s->phy_port, A_ST_WR_STA, V_ST_ACT_ACTIVATE); /* start T1 if in NT mode, T3 if in TE mode */ if (s->te_mode) { s->hfc_timers[HFC_T3] = b4->ticks + timer_3_ms; s->hfc_timer_on[HFC_T3] = 1; s->hfc_timer_on[HFC_T1] = 0; s->hfc_timers[HFC_T4] = b4->ticks + 1000; s->hfc_timer_on[HFC_T4] = 1; if (DBG_ST) { dev_info(&b4->pdev->dev, "setting port %d t3 timer to %lu\n", s->port + 1, s->hfc_timers[HFC_T3]); } } else { s->hfc_timers[HFC_T1] = b4->ticks + timer_1_ms; s->hfc_timer_on[HFC_T1] = 1; s->hfc_timer_on[HFC_T3] = 0; if (DBG_ST) { dev_info(&b4->pdev->dev, "setting port %d t1 timer to %lu\n", s->port + 1, s->hfc_timers[HFC_T1]); } } } /* * read in the HFC GPIO to determine each port's mode (TE or NT). * Then, reset and start the port. * the flow controller should be set up before this is called. */ static void hfc_init_all_st(struct b4xxp *b4) { int gpio = 0; int i, nt; struct b4xxp_span *s; /* All other cards supported by this driver read jumpers for modes */ if (!IS_B430P(b4)) gpio = b4xxp_getreg8(b4, R_GPI_IN3); for (i=0; i < b4->numspans; i++) { s = &b4->spans[i]; s->parent = b4; if (IS_B430P(b4)) { /* The physical ports are reversed on the b430 */ /* Port 0-3 in b4->spans[] are physically ports 3-0 */ s->phy_port = b4->numspans-1-i; s->port = i; } else { s->phy_port = i; s->port = i; } /* The way the Digium B410P card reads the NT/TE mode * jumper is the oposite of how other HFC-4S cards do: * - In B410P: GPIO=0: NT * - In Junghanns: GPIO=0: TE */ if (IS_B410P(b4)) { nt = ((gpio & (1 << (i + 4))) == 0); } else if (IS_B430P(b4)) { /* Read default digital lineconfig reg on B430 */ int reg; unsigned long flags; spin_lock_irqsave(&b4->seqlock, flags); hfc_gpio_set(b4, 0x20); reg = hfc_sram_read(b4); spin_unlock_irqrestore(&b4->seqlock, flags); if (reg & (1 << (4 + s->phy_port))) nt = 1; else nt = 0; } else { nt = ((gpio & (1 << (i + 4))) != 0); } s->te_mode = !nt; dev_info(&b4->pdev->dev, "Port %d: %s mode\n", i + 1, (nt ? "NT" : "TE")); } } /* * Look at one B-channel FIFO and determine if we should exchange data with it. * It is assumed that the S/T port is active. * returns 1 if data was exchanged, 0 otherwise. */ static int hfc_poll_one_bchan_fifo(struct b4xxp_span *span, int c) { int fifo, zlen, z1, z2, ret; unsigned long irq_flags; struct b4xxp *b4; struct dahdi_chan *chan; ret = 0; b4 = span->parent; fifo = span->fifos[c]; chan = span->chans[c]; spin_lock_irqsave(&b4->fifolock, irq_flags); /* select RX FIFO */ hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_FIFO_DIR | V_REV); get_Z(z1, z2, zlen); /* TODO: error checking, full FIFO mostly */ if (zlen >= DAHDI_CHUNKSIZE) { *(unsigned int *)&chan->readchunk[0] = b4xxp_getreg32(b4, A_FIFO_DATA2); *(unsigned int *)&chan->readchunk[4] = b4xxp_getreg32(b4, A_FIFO_DATA2); /* * now TX FIFO * * Note that we won't write to the TX FIFO if there wasn't room in the RX FIFO. * The TX and RX sides should be kept pretty much lock-step. * * Write the last byte _NOINC so that if we don't get more data in time, we aren't leaking unknown data * (See HFC datasheet) */ hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_REV); b4xxp_setreg32(b4, A_FIFO_DATA2, *(unsigned int *) &chan->writechunk[0]); b4xxp_setreg32(b4, A_FIFO_DATA2, *(unsigned int *) &chan->writechunk[4]); ret = 1; } spin_unlock_irqrestore(&b4->fifolock, irq_flags); return ret; } /* * Run through all of the host-facing B-channel RX FIFOs, looking for at least 8 bytes available. * If a B channel RX fifo has enough data, perform the data transfer in both directions. * D channel is done in an interrupt handler. * The S/T port state must be active or we ignore the fifo. * Returns nonzero if there was at least DAHDI_CHUNKSIZE bytes in the FIFO */ static int hfc_poll_fifos(struct b4xxp *b4) { int ret=0, span; unsigned long irq_flags; for (span=0; span < b4->numspans; span++) { /* Make sure DAHDI's got this span up */ if (!(b4->spans[span].span.flags & DAHDI_FLAG_RUNNING)) continue; /* TODO: Make sure S/T port is in active state */ ret = hfc_poll_one_bchan_fifo(&b4->spans[span], 0); ret |= hfc_poll_one_bchan_fifo(&b4->spans[span], 1); } /* change the active FIFO one last time to make sure the last-changed FIFO updates its pointers (as per the datasheet) */ spin_lock_irqsave(&b4->fifolock, irq_flags); hfc_setreg_waitbusy(b4, R_FIFO, (31 << V_FIFO_NUM_SHIFT)); spin_unlock_irqrestore(&b4->fifolock, irq_flags); return ret; } /* NOTE: assumes fifo lock is held */ static inline void debug_fz(struct b4xxp *b4, int fifo, const char *prefix, char *buf) { int f1, f2, flen, z1, z2, zlen; get_F(f1, f2, flen); get_Z(z1, z2, zlen); sprintf(buf, "%s: (fifo %d): f1/f2/flen=%d/%d/%d, z1/z2/zlen=%d/%d/%d\n", prefix, fifo, f1, f2, flen, z1, z2, zlen); } /* enable FIFO RX int and reset the FIFO */ static int hdlc_start(struct b4xxp *b4, int fifo) { b4->fifo_en_txint |= (1 << fifo); b4->fifo_en_rxint |= (1 << fifo); hfc_reset_fifo_pair(b4, fifo, 1, 0); return 0; } /* disable FIFO ints and reset the FIFO */ static void hdlc_stop(struct b4xxp *b4, int fifo) { b4->fifo_en_txint &= ~(1 << fifo); b4->fifo_en_rxint &= ~(1 << fifo); hfc_reset_fifo_pair(b4, fifo, 1, 0); } /* * Inner loop for D-channel receive function. * Retrieves a full HDLC frame from the hardware. * If the hardware indicates that the frame is complete, * we check the HDLC engine's STAT byte and update DAHDI as needed. * * Returns the number of HDLC frames left in the FIFO. */ static int hdlc_rx_frame(struct b4xxp_span *bspan) { int fifo, i, j, zleft; int z1, z2, zlen, f1, f2, flen; unsigned char buf[WCB4XXP_HDLC_BUF_LEN]; char debugbuf[256]; unsigned long irq_flags; struct b4xxp *b4 = bspan->parent; unsigned char stat; fifo = bspan->fifos[2]; spin_lock_irqsave(&b4->fifolock, irq_flags); hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); get_F(f1, f2, flen); get_Z(z1, z2, zlen); debug_fz(b4, fifo, "hdlc_rx_frame", debugbuf); spin_unlock_irqrestore(&b4->fifolock, irq_flags); if (DBG_HDLC && DBG_SPANFILTER) { pr_info("%s", debugbuf); } /* first check to make sure we really do have HDLC frames available to retrieve */ if (flen == 0) { if (DBG_HDLC && DBG_SPANFILTER) { dev_info(&b4->pdev->dev, "hdlc_rx_frame(span %d): no frames available?\n", bspan->port + 1); } return flen; } zleft = zlen + 1; /* include STAT byte that the HFC injects after FCS */ do { int truncated; if (zleft > WCB4XXP_HDLC_BUF_LEN) { truncated = 1; j = WCB4XXP_HDLC_BUF_LEN; } else { truncated = 0; j = zleft; } spin_lock_irqsave(&b4->fifolock, irq_flags); hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); for (i=0; i < j; i++) buf[i] = b4xxp_getreg8(b4, A_FIFO_DATA0); spin_unlock_irqrestore(&b4->fifolock, irq_flags); /* don't send STAT byte to DAHDI */ if ((bspan->sigchan) && (j > 1)) dahdi_hdlc_putbuf(bspan->sigchan, buf, truncated ? j : j - 1); zleft -= j; if (DBG_HDLC && DBG_SPANFILTER) { dev_info(&b4->pdev->dev, "hdlc_rx_frame(span %d): z1/z2/zlen=%d/%d/%d, zleft=%d\n", bspan->port + 1, z1, z2, zlen, zleft); for (i=0; i < j; i++) printk("%02x%c", buf[i], (i < ( j - 1)) ? ' ':'\n'); } } while (zleft > 0); stat = buf[j - 1]; /* Frame received, increment F2 and get an updated count of frames left */ spin_lock_irqsave(&b4->fifolock, irq_flags); hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_INC_F); get_F(f1, f2, flen); spin_unlock_irqrestore(&b4->fifolock, irq_flags); /* If this channel is not configured with a signalling span we don't * need to notify the rest of dahdi about this frame. */ if (!bspan->sigchan) return flen; ++bspan->frames_in; if (zlen < 3) { if (DBG_HDLC && DBG_SPANFILTER) dev_notice(&b4->pdev->dev, "odd, zlen less then 3?\n"); dahdi_hdlc_abort(bspan->sigchan, DAHDI_EVENT_ABORT); } else { /* if STAT != 0, indicates bad frame */ if (stat != 0x00) { if (DBG_HDLC && DBG_SPANFILTER) { dev_info(&b4->pdev->dev, "(span %d) STAT=0x%02x indicates " "frame problem: ", bspan->port + 1, stat); } if (stat == 0xff) { if (DBG_HDLC && DBG_SPANFILTER) printk("HDLC Abort\n"); dahdi_hdlc_abort(bspan->sigchan, DAHDI_EVENT_ABORT); } else { if (DBG_HDLC && DBG_SPANFILTER) printk("Bad FCS\n"); dahdi_hdlc_abort(bspan->sigchan, DAHDI_EVENT_BADFCS); } /* STAT == 0, means frame was OK */ } else { if (DBG_HDLC && DBG_SPANFILTER) { dev_info(&b4->pdev->dev, "(span %d) Frame %d is good!\n", bspan->port + 1, bspan->frames_in); } dahdi_hdlc_finish(bspan->sigchan); } } return flen; } /* * Takes one blob of data from DAHDI and shoots it out to the hardware. * The blob may or may not be a complete HDLC frame. * If it isn't, the D-channel FIFO interrupt handler will take care of pulling the rest. * Returns nonzero if there is still data to send in the current HDLC frame. */ static int hdlc_tx_frame(struct b4xxp_span *bspan) { struct b4xxp *b4 = bspan->parent; int res, i, fifo; int z1, z2, zlen; unsigned char buf[WCB4XXP_HDLC_BUF_LEN]; unsigned int size = sizeof(buf) / sizeof(buf[0]); char debugbuf[256]; unsigned long irq_flags; /* if we're ignoring TE red alarms and we are in alarm, restart the * S/T state machine */ if (bspan->te_mode && bspan->newalarm != 0) hfc_start_st(bspan); fifo = bspan->fifos[2]; res = dahdi_hdlc_getbuf(bspan->sigchan, buf, &size); spin_lock_irqsave(&b4->fifolock, irq_flags); hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT)); get_Z(z1, z2, zlen); debug_fz(b4, fifo, "hdlc_tx_frame", debugbuf); /* TODO: check zlen, etc. */ if (size > 0) { bspan->sigactive = 1; for (i=0; i < size; i++) b4xxp_setreg8(b4, A_FIFO_DATA0, buf[i]); /* * If we got a full frame from DAHDI, increment F and decrement our HDLC pending counter. * Otherwise, select the FIFO again (to start transmission) and make sure the * TX IRQ is enabled so we will get called again to finish off the data */ if (res != 0) { ++bspan->frames_out; bspan->sigactive = 0; hfc_setreg_waitbusy(b4, A_INC_RES_FIFO, V_INC_F); atomic_dec(&bspan->hdlc_pending); } else { hfc_setreg_waitbusy(b4, R_FIFO, (fifo << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_IRQ_MSK, V_IRQ); } } /* if there are no more frames pending, disable the interrupt. */ if (res == -1) { b4xxp_setreg8(b4, A_IRQ_MSK, 0); } spin_unlock_irqrestore(&b4->fifolock, irq_flags); if (DBG_HDLC && DBG_SPANFILTER) { dev_info(&b4->pdev->dev, "%s", debugbuf); dev_info(&b4->pdev->dev, "hdlc_tx_frame(span %d): DAHDI gave %d bytes for FIFO %d (res=%d)\n", bspan->port + 1, size, fifo, res); for (i=0; i < size; i++) printk("%02x%c", buf[i], (i < (size - 1)) ? ' ' : '\n'); if (size && res != 0) { pr_info("Transmitted frame %d on span %d\n", bspan->frames_out - 1, bspan->port + 1); } } return(res == 0); } /* * b4xxp lowlevel functions * These are functions which impact more than just the HFC controller. * (those are named hfc_xxx()) */ /* * Performs a total reset of the card, reinitializes GPIO. * The card is initialized enough to have LEDs running, and that's about it. * Anything to do with audio and enabling any kind of processing is done in stage2. */ static void b4xxp_init_stage1(struct b4xxp *b4) { int i; hfc_reset(b4); /* total reset of controller */ hfc_gpio_init(b4); /* initialize controller GPIO for CPLD access */ ec_init(b4); /* initialize VPM and VPM GPIO */ b4xxp_setreg8(b4, R_IRQ_CTRL, 0x00); /* make sure interrupts are disabled */ flush_pci(); /* make sure PCI write hits hardware */ /* disable all FIFO interrupts */ for (i=0; i < HFC_NR_FIFOS; i++) { hfc_setreg_waitbusy(b4, R_FIFO, (i << V_FIFO_NUM_SHIFT)); b4xxp_setreg8(b4, A_IRQ_MSK, 0x00); /* disable the interrupt */ hfc_setreg_waitbusy(b4, R_FIFO, (i << V_FIFO_NUM_SHIFT) | V_FIFO_DIR); b4xxp_setreg8(b4, A_IRQ_MSK, 0x00); /* disable the interrupt */ flush_pci(); } /* clear any pending FIFO interrupts */ b4xxp_getreg8(b4, R_IRQ_FIFO_BL0); b4xxp_getreg8(b4, R_IRQ_FIFO_BL1); b4xxp_getreg8(b4, R_IRQ_FIFO_BL2); b4xxp_getreg8(b4, R_IRQ_FIFO_BL3); b4xxp_getreg8(b4, R_IRQ_FIFO_BL4); b4xxp_getreg8(b4, R_IRQ_FIFO_BL5); b4xxp_getreg8(b4, R_IRQ_FIFO_BL6); b4xxp_getreg8(b4, R_IRQ_FIFO_BL7); b4xxp_setreg8(b4, R_SCI_MSK, 0x00); /* mask off all S/T interrupts */ b4xxp_setreg8(b4, R_IRQMSK_MISC, 0x00); /* nothing else can generate an interrupt */ /* * set up the clock controller B410P & Cologne Eval Board have a * 24.576MHz crystal, so the PCM clock is 2x the incoming clock. * Other cards have a 49.152Mhz crystal, so the PCM clock equals * incoming clock. */ if (IS_B410P(b4) || IS_B430P(b4) || (b4->card_type == QUADBRI_EVAL)) b4xxp_setreg8(b4, R_BRG_PCM_CFG, 0x02); else b4xxp_setreg8(b4, R_BRG_PCM_CFG, V_PCM_CLK); /* Reset LED state */ b4->ledreg = 0; b4xxp_update_leds(b4); flush_pci(); udelay(100); /* wait a bit for clock to settle */ } /* * Stage 2 hardware init. * Sets up the flow controller, PCM and FIFOs. * Initializes the echo cancellers. * S/T interfaces are not initialized here, that is done later, in hfc_init_all_st(). * Interrupts are enabled and once the s/t interfaces are configured, chip should be pretty much operational. */ static void b4xxp_init_stage2(struct b4xxp *b4) { int span; /* * set up PCM bus. * HFC is PCM master. * C4IO, SYNC_I and SYNC_O unused. * 32 channels, frame signal positive polarity, active for 2 C4 clocks. * only the first two timeslots in each quad are active * STIO0 is transmit-only, STIO1 is receive-only. */ b4xxp_setreg8(b4, R_PCM_MD0, V_PCM_MD | V_PCM_IDX_MD1); flush_pci(); if (IS_B430P(b4)) { b4xxp_setreg8(b4, R_PCM_MD1, V_PLL_ADJ_00 | V_PCM_DR_4096); b4xxp_setreg8(b4, R_PWM_MD, 0x50); b4xxp_setreg8(b4, R_PWM0, 0x38); } else { b4xxp_setreg8(b4, R_PCM_MD1, V_PLL_ADJ_00 | V_PCM_DR_2048); b4xxp_setreg8(b4, R_PWM_MD, 0xa0); b4xxp_setreg8(b4, R_PWM0, 0x1b); } /* * set up the flow controller. * B channel map: (4 ports cards with Hardware Echo Cancel present & active) * FIFO 0 connects Port 1 B0 using HFC channel 16 and PCM timeslots 0/1. * FIFO 1 connects Port 1 B1 using HFC channel 17 and PCM timeslots 4/5. * FIFO 2 connects Port 2 B0 using HFC channel 20 and PCM timeslots 8/9. * FIFO 3 connects Port 2 B1 using HFC channel 21 and PCM timeslots 12/13. * FIFO 4 connects Port 3 B0 using HFC channel 24 and PCM timeslots 16/17. * FIFO 5 connects Port 3 B1 using HFC channel 25 and PCM timeslots 20/21. * FIFO 6 connects Port 4 B0 using HFC channel 28 and PCM timeslots 24/25. * FIFO 7 connects Port 4 B1 using HFC channel 29 and PCM timeslots 28/29. * * All B channel FIFOs have their HDLC controller in transparent mode, * and only the FIFO for B0 on each port has its interrupt operational. * * D channels are handled by FIFOs 8-11. * FIFO 8 connects Port 1 D using HFC channel 3 * FIFO 9 connects Port 2 D using HFC channel 7 * FIFO 10 connects Port 3 D using HFC channel 11 * FIFO 11 connects Port 4 D using HFC channel 15 * * D channel FIFOs are operated in HDLC mode and interrupt on end of frame. * * B channel map: (8 ports cards without Hardware Echo Cancel) * FIFO 0 connects Port 1 B0 using HFC channel 0 * FIFO 1 connects Port 1 B1 using HFC channel 1 * FIFO 2 connects Port 2 B0 using HFC channel 4 * FIFO 3 connects Port 2 B1 using HFC channel 5 * ......................... * FIFO 14 connects Port 8 B0 using HFC channel 28 * FIFO 15 connects Port 8 B1 using HFC channel 29 * * All B channel FIFOs have their HDLC controller in transparent mode, * and only the FIFO for B0 on each port has its interrupt operational. * * D channels are handled by FIFOs 16-23. * FIFO 16 connects Port 1 D using HFC channel 3 * FIFO 17 connects Port 2 D using HFC channel 7 * FIFO 18 connects Port 3 D using HFC channel 11 * FIFO 19 connects Port 4 D using HFC channel 15 * ................ * FIFO 23 connects Port 8 D using HFC channel 31 * D channel FIFOs are operated in HDLC mode and interrupt on end of frame. */ for (span=0; span < b4->numspans; span++) { if (IS_B430P(b4)) { hfc_assign_fifo_zl(b4, span, 0); hfc_assign_fifo_zl(b4, span, 1); hfc_assign_dchan_fifo(b4, span); } else { if ((vpmsupport) && (CARD_HAS_EC(b4))) { hfc_assign_bchan_fifo_ec(b4, span, 0); hfc_assign_bchan_fifo_ec(b4, span, 1); } else { hfc_assign_bchan_fifo_noec(b4, span, 0); hfc_assign_bchan_fifo_noec(b4, span, 1); } hfc_assign_dchan_fifo(b4, span); } } /* set up the timer interrupt for 1ms intervals */ b4xxp_setreg8(b4, R_TI_WD, (2 << V_EV_TS_SHIFT)); /* * At this point, everything's set up and ready to go. * Don't actually enable the global interrupt pin. * DAHDI still needs to start up the spans, and we don't know exactly when. */ } static void b4xxp_setleds(struct b4xxp *b4, unsigned char val) { ec_write(b4, 0, 0x1a8 + 3, val); } static void b4xxp_update_leds_hfc_8s(struct b4xxp *b4) { unsigned long lled = 0; /* A bit set is a led OFF */ unsigned long leddw; int j; struct b4xxp_span *bspan; b4->blinktimer++; for (j = 7; j >= 0; j--) { bspan = &b4->spans[7 - j]; if (!(bspan->span.flags & DAHDI_FLAG_RUNNING) || bspan->span.alarms) { BIT_SET(lled, j); continue; /* Led OFF */ } if (bspan->span.mainttimer || bspan->span.maintstat) { /* Led Blinking in maint state */ if (b4->blinktimer >= 0x7f) BIT_SET(lled, j); } /* Else: Led on */ } /* Write Leds...*/ leddw = lled << 24 | lled << 16 | lled << 8 | lled; b4xxp_setreg8(b4, R_BRG_PCM_CFG, 0x21); iowrite16(0x4000, b4->ioaddr + 4); iowrite32(leddw, b4->ioaddr); b4xxp_setreg8(b4, R_BRG_PCM_CFG, 0x20); if (b4->blinktimer == 0xff) b4->blinktimer = -1; } /* So far only tested for OpenVox cards. Please test it for other hardware */ static void b4xxp_update_leds_hfc(struct b4xxp *b4) { int i; int leds = 0, green_leds = 0; /* Default: off */ struct b4xxp_span *bspan; b4->blinktimer++; for (i=0; i < b4->numspans; i++) { bspan = &b4->spans[i]; if (!(bspan->span.flags & DAHDI_FLAG_RUNNING)) continue; /* Leds are off */ if (bspan->span.alarms) { /* Red blinking -> Alarm */ if (b4->blinktimer >= 0x7f) BIT_SET(leds, i); } else if (bspan->span.mainttimer || bspan->span.maintstat) { /* Green blinking -> Maint status */ if (b4->blinktimer >= 0x7f) BIT_SET(green_leds, i); } else { /* Steady grean -> No Alarm */ BIT_SET(green_leds, i); } } /* Actually set them. for red: just set the bit in R_GPIO_EN1. For green: in both R_GPIO_EN1 and R_GPIO_OUT1. */ leds |= green_leds; b4xxp_setreg8(b4, R_GPIO_EN1, leds); hfc_gpio_set(b4, green_leds); if (b4->blinktimer == 0xff) b4->blinktimer = -1; } static void b4xxp_set_span_led(struct b4xxp *b4, int span, unsigned char val) { if (IS_B430P(b4)) { unsigned long flags; b4->ledreg &= ~(0x03 << span*2); b4->ledreg |= (val << span*2); spin_lock_irqsave(&b4->seqlock, flags); /* Set multiplexer for led R/W */ hfc_gpio_set(b4, 0x10); hfc_sram_write(b4, b4->ledreg); spin_unlock_irqrestore(&b4->seqlock, flags); } else { int shift, spanmask; shift = span << 1; spanmask = ~(0x03 << shift); b4->ledreg &= spanmask; b4->ledreg |= (val << shift); b4xxp_setleds(b4, b4->ledreg); } } static void b4xxp_update_leds(struct b4xxp *b4) { int i; struct b4xxp_span *bspan; if (b4->numspans == 8) { /* Use the alternative function for non-Digium HFC-8S cards */ b4xxp_update_leds_hfc_8s(b4); return; } if (!IS_B410P(b4) && !IS_B430P(b4)) { /* Use the alternative function for non-Digium HFC-4S cards */ b4xxp_update_leds_hfc(b4); return; } b4->blinktimer++; for (i=0; i < b4->numspans; i++) { bspan = &b4->spans[i]; if (bspan->span.flags & DAHDI_FLAG_RUNNING) { if (bspan->span.alarms) { if (b4->blinktimer == (led_fader_table[b4->alarmpos] >> 1)) b4xxp_set_span_led(b4, i, LED_RED); if (b4->blinktimer == 0xf) b4xxp_set_span_led(b4, i, LED_OFF); } else if (bspan->span.mainttimer || bspan->span.maintstat) { if (b4->blinktimer == (led_fader_table[b4->alarmpos] >> 1)) b4xxp_set_span_led(b4, i, LED_GREEN); if (b4->blinktimer == 0xf) b4xxp_set_span_led(b4, i, LED_OFF); } else { /* No Alarm */ b4xxp_set_span_led(b4, i, LED_GREEN); } } else b4xxp_set_span_led(b4, i, LED_OFF); } if (b4->blinktimer == 0xf) { b4->blinktimer = -1; b4->alarmpos++; if (b4->alarmpos >= (sizeof(led_fader_table) / sizeof(led_fader_table[0]))) b4->alarmpos = 0; } } static const char *b4xxp_echocan_name(const struct dahdi_chan *chan) { struct b4xxp_span *bspan = container_of(chan->span, struct b4xxp_span, span); if (!vpmsupport) return NULL; if (IS_B410P(bspan->parent)) return "LASVEGAS2"; if (IS_B430P(bspan->parent)) return "ZARLINK"; return NULL; } static int b4xxp_echocan_create(struct dahdi_chan *chan, struct dahdi_echocanparams *ecp, struct dahdi_echocanparam *p, struct dahdi_echocan_state **ec) { struct b4xxp_span *bspan = container_of(chan->span, struct b4xxp_span, span); int channel; if (!vpmsupport || !CARD_HAS_EC(bspan->parent)) return -ENODEV; if (chan->chanpos == 3) { printk(KERN_WARNING "Cannot enable echo canceller on D channel of span %d; failing request\n", chan->span->offset); return -EINVAL; } if (ecp->param_count > 0) { printk(KERN_WARNING "wcb4xxp echo canceller does not support parameters; failing request\n"); return -EINVAL; } *ec = &bspan->ec[chan->chanpos]; (*ec)->ops = &my_ec_ops; (*ec)->features = my_ec_features; if (DBG_EC) printk("Enabling echo cancellation on chan %d span %d\n", chan->chanpos, chan->span->offset); channel = (chan->span->offset * 8) + ((chan->chanpos - 1) * 4) + 1; if (IS_B430P(bspan->parent)) { /* Zarlink has 4 groups of 2 channel echo cancelers */ /* Each channel has it's own individual control reg */ int group = (3 - chan->span->offset) * 0x40; int chan_offset = (chan->chanpos % 2) ? 0x00 : 0x20; int reg; unsigned long flags; spin_lock_irqsave(&bspan->parent->seqlock, flags); reg = __zl_read(bspan->parent, group + chan_offset); reg &= ~(1 << 3); __zl_write(bspan->parent, group + chan_offset, reg); spin_unlock_irqrestore(&bspan->parent->seqlock, flags); } else { ec_write(bspan->parent, chan->chanpos - 1, channel, 0x7e); } return 0; } static void echocan_free(struct dahdi_chan *chan, struct dahdi_echocan_state *ec) { struct b4xxp_span *bspan = container_of(chan->span, struct b4xxp_span, span); int channel; memset(ec, 0, sizeof(*ec)); if (DBG_EC) printk("Disabling echo cancellation on chan %d span %d\n", chan->chanpos, chan->span->offset); channel = (chan->span->offset * 8) + ((chan->chanpos - 1) * 4) + 1; if (IS_B430P(bspan->parent)) { /* Zarlink has 4 groups of 2 channel echo cancelers */ /* Each channel has it's own individual control reg */ int group = (3 - chan->span->offset) * 0x40; int chan_offset = (chan->chanpos % 2) ? 0x00 : 0x20; int reg; unsigned long flags; spin_lock_irqsave(&bspan->parent->seqlock, flags); reg = __zl_read(bspan->parent, group + chan_offset); reg |= (1 << 3); __zl_write(bspan->parent, group + chan_offset, reg); spin_unlock_irqrestore(&bspan->parent->seqlock, flags); } else { ec_write(bspan->parent, chan->chanpos - 1, channel, 0x01); } } /* * Filesystem and DAHDI interfaces */ static int b4xxp_ioctl(struct dahdi_chan *chan, unsigned int cmd, unsigned long data) { switch(cmd) { default: return -ENOTTY; } return 0; } static int b4xxp_startup(struct file *file, struct dahdi_span *span) { struct b4xxp_span *bspan = container_of(span, struct b4xxp_span, span); struct b4xxp *b4 = bspan->parent; if (!b4->running) hfc_enable_interrupts(bspan->parent); return 0; } static int b4xxp_shutdown(struct dahdi_span *span) { struct b4xxp_span *bspan = container_of(span, struct b4xxp_span, span); hfc_disable_interrupts(bspan->parent); return 0; } /* resets all the FIFOs for a given span. Disables IRQs for the span FIFOs */ static void b4xxp_reset_span(struct b4xxp_span *bspan) { int i; struct b4xxp *b4 = bspan->parent; for (i=0; i < 3; i++) { hfc_reset_fifo_pair(b4, bspan->fifos[i], (i == 2) ? 1 : 0, 1); } b4xxp_set_sync_src(b4, b4xxp_find_sync(b4)); } /* spanconfig for us means to set up the HFC FIFO and channel mapping */ static int b4xxp_spanconfig(struct file *file, struct dahdi_span *span, struct dahdi_lineconfig *lc) { int i; struct b4xxp_span *bspan = container_of(span, struct b4xxp_span, span); struct b4xxp *b4 = bspan->parent; if (DBG) dev_info(&b4->pdev->dev, "Configuring span %d offset %d to be sync %d\n", span->spanno, span->offset, lc->sync); if (lc->sync < 0 || lc->sync > 4) { dev_info(&b4->pdev->dev, "Span %d has invalid sync priority (%d), removing " "from sync source list\n", span->spanno, lc->sync); lc->sync = 0; } /* remove this span number from the current sync sources, if there */ for (i = 0; i < b4->numspans; i++) { if (b4->spans[i].sync == (span->offset + 1)) { b4->spans[i].sync = 0; } } if (lc->sync) b4->spans[lc->sync - 1].sync = (span->offset + 1); /* B430 sets TE/NT and Termination resistance modes via dahdi_cfg */ if (IS_B430P(b4)) { int te_mode, term, reg; unsigned long flags; te_mode = (lc->lineconfig & DAHDI_CONFIG_NTTE) ? 0 : 1; term = (lc->lineconfig & DAHDI_CONFIG_TERM) ? 1 : 0; dev_info(&b4->pdev->dev, "Configuring span %d in %s mode with termination resistance %s\n", bspan->port+1, (te_mode) ? "TE" : "NT", (term) ? "ENABLED" : "DISABLED"); if (!te_mode && lc->sync) { dev_info(&b4->pdev->dev, "NT Spans cannot be timing sources. Changing priority to 0\n"); lc->sync = 0; } /* Setup NT/TE */ /* Bits 7 downto 5 correspond to spans 4-1 */ /* 1 sets NT mode, 0 sets TE mode */ spin_lock_irqsave(&b4->seqlock, flags); hfc_gpio_set(b4, 0x20); reg = hfc_sram_read(b4); if (te_mode) reg &= ~(1 << (4 + bspan->port)); else reg |= (1 << (4 + bspan->port)); /* Setup Termination resistance */ /* Bits 4 downto 0 correspond to spans 4-1 */ /* 1 sets resistance mode, 0 sets no resistance */ if (term) reg |= (1 << (bspan->port)); else reg &= ~(1 << (bspan->port)); hfc_gpio_set(b4, 0x20); hfc_sram_write(b4, reg); spin_unlock_irqrestore(&b4->seqlock, flags); bspan->te_mode = te_mode; bspan->span.spantype = (bspan->te_mode) ? SPANTYPE_DIGITAL_BRI_TE : SPANTYPE_DIGITAL_BRI_NT; } hfc_reset_st(bspan); if (persistentlayer1) hfc_start_st(bspan); b4xxp_reset_span(bspan); /* call startup() manually here, because DAHDI won't call the startup function unless it receives an IOCTL to do so, and dahdi_cfg doesn't. */ b4xxp_startup(file, &bspan->span); span->flags |= DAHDI_FLAG_RUNNING; return 0; } /* chanconfig for us means to configure the HDLC controller, if appropriate */ static int b4xxp_chanconfig(struct file *file, struct dahdi_chan *chan, int sigtype) { int alreadyrunning; struct b4xxp *b4 = chan->pvt; struct b4xxp_span *bspan = &b4->spans[chan->span->offset]; int fifo = bspan->fifos[2]; alreadyrunning = bspan->span.flags & DAHDI_FLAG_RUNNING; if (DBG_FOPS) { dev_info(&b4->pdev->dev, "%s channel %d (%s) sigtype %08x\n", alreadyrunning ? "Reconfigured" : "Configured", chan->channo, chan->name, sigtype); } /* (re)configure signalling channel */ if ((sigtype == DAHDI_SIG_HARDHDLC) || (bspan->sigchan == chan)) { if (DBG_FOPS) dev_info(&b4->pdev->dev, "%sonfiguring hardware HDLC on %s\n", ((sigtype == DAHDI_SIG_HARDHDLC) ? "C" : "Unc"), chan->name); if (alreadyrunning && bspan->sigchan) { hdlc_stop(b4, fifo); atomic_set(&bspan->hdlc_pending, 0); bspan->sigactive = 0; smp_mb(); bspan->sigchan = NULL; } if (sigtype == DAHDI_SIG_HARDHDLC) { if (hdlc_start(b4, fifo)) { dev_warn(&b4->pdev->dev, "Error initializing signalling controller\n"); return -1; } } bspan->sigchan = (sigtype == DAHDI_SIG_HARDHDLC) ? chan : NULL; bspan->sigactive = 0; atomic_set(&bspan->hdlc_pending, 0); } else { /* FIXME: shouldn't I be returning an error? */ } return 0; } static int _b4xxp_open(struct dahdi_chan *chan) { struct b4xxp *b4 = chan->pvt; struct b4xxp_span *bspan = &b4->spans[chan->span->offset]; if (DBG_FOPS && DBG_SPANFILTER) { dev_info(&b4->pdev->dev, "open() on chan %s (%i/%i)\n", chan->name, chan->channo, chan->chanpos); } hfc_reset_fifo_pair(b4, bspan->fifos[chan->chanpos - 1], 0, 0); return 0; } static int b4xxp_open(struct dahdi_chan *chan) { unsigned long flags; int res; spin_lock_irqsave(&chan->lock, flags); res = _b4xxp_open(chan); spin_unlock_irqrestore(&chan->lock, flags); return res; } static int b4xxp_close(struct dahdi_chan *chan) { struct b4xxp *b4 = chan->pvt; struct b4xxp_span *bspan = &b4->spans[chan->span->offset]; if (DBG_FOPS && DBG_SPANFILTER) { dev_info(&b4->pdev->dev, "close() on chan %s (%i/%i)\n", chan->name, chan->channo, chan->chanpos); } hfc_reset_fifo_pair(b4, bspan->fifos[chan->chanpos - 1], 1, 1); return 0; } /* DAHDI calls this when it has data it wants to send to the HDLC controller */ static void b4xxp_hdlc_hard_xmit(struct dahdi_chan *chan) { struct b4xxp *b4 = chan->pvt; int span = chan->span->offset; struct b4xxp_span *bspan = &b4->spans[span]; if ((DBG_FOPS || DBG_HDLC) && DBG_SPANFILTER) dev_info(&b4->pdev->dev, "hdlc_hard_xmit on chan %s (%i/%i), span=%i\n", chan->name, chan->channo, chan->chanpos, span + 1); /* * increment the hdlc_pending counter and trigger the bottom-half so it * will be picked up and sent. */ if (bspan->sigchan == chan) { atomic_inc(&bspan->hdlc_pending); } } /* internal functions, not specific to the hardware or DAHDI */ static const struct dahdi_span_ops b4xxp_span_ops = { .owner = THIS_MODULE, .spanconfig = b4xxp_spanconfig, .chanconfig = b4xxp_chanconfig, .startup = b4xxp_startup, .shutdown = b4xxp_shutdown, .open = b4xxp_open, .close = b4xxp_close, .ioctl = b4xxp_ioctl, .hdlc_hard_xmit = b4xxp_hdlc_hard_xmit, .echocan_create = b4xxp_echocan_create, .echocan_name = b4xxp_echocan_name, }; /* initialize the span/chan structures. Doesn't touch hardware, although the callbacks might. */ static void init_spans(struct b4xxp *b4) { int i, j; struct b4xxp_span *bspan; struct dahdi_chan *chan; /* for each span on the card */ for (i=0; i < b4->numspans; i++) { bspan = &b4->spans[i]; bspan->parent = b4; bspan->span.spantype = (bspan->te_mode) ? SPANTYPE_DIGITAL_BRI_TE : SPANTYPE_DIGITAL_BRI_NT; bspan->span.offset = i; bspan->span.channels = WCB4XXP_CHANNELS_PER_SPAN; bspan->span.flags = 0; if (!strcasecmp(companding, "ulaw")) bspan->span.deflaw = DAHDI_LAW_MULAW; else bspan->span.deflaw = DAHDI_LAW_ALAW; /* For simplicty, we'll accept all line modes since BRI * ignores this setting anyway.*/ bspan->span.linecompat = DAHDI_CONFIG_AMI | DAHDI_CONFIG_B8ZS | DAHDI_CONFIG_D4 | DAHDI_CONFIG_ESF | DAHDI_CONFIG_HDB3 | DAHDI_CONFIG_CCS | DAHDI_CONFIG_CRC4 | DAHDI_CONFIG_NTTE | DAHDI_CONFIG_TERM; sprintf(bspan->span.name, "B4/%d/%d", b4->cardno, i+1); sprintf(bspan->span.desc, "B4XXP (PCI) Card %d Span %d", b4->cardno, i+1); bspan->span.ops = &b4xxp_span_ops; /* HDLC stuff */ bspan->sigchan = NULL; bspan->sigactive = 0; bspan->span.chans = bspan->chans; /* now initialize each channel in the span */ for (j=0; j < WCB4XXP_CHANNELS_PER_SPAN; j++) { bspan->chans[j] = &bspan->_chans[j]; chan = bspan->chans[j]; chan->pvt = b4; sprintf(chan->name, "B4/%d/%d/%d", b4->cardno, i + 1, j + 1); /* The last channel in the span is the D-channel */ if (j == WCB4XXP_CHANNELS_PER_SPAN - 1) { chan->sigcap = DAHDI_SIG_HARDHDLC; } else { chan->sigcap = DAHDI_SIG_CLEAR | DAHDI_SIG_DACS; } chan->chanpos = j + 1; chan->writechunk = (void *)(bspan->writechunk + j * DAHDI_CHUNKSIZE); chan->readchunk = (void *)(bspan->readchunk + j * DAHDI_CHUNKSIZE); } } } static void b4xxp_bottom_half(unsigned long data); /* top-half interrupt handler */ DAHDI_IRQ_HANDLER(b4xxp_interrupt) { struct b4xxp *b4 = dev_id; unsigned char status; unsigned long flags; int i; /* Make sure it's really for us */ status = __pci_in8(b4, R_STATUS); if (!(status & HFC_INTS)) return IRQ_NONE; /* * since the interrupt is for us, read in the FIFO and misc IRQ status registers. * Don't replace the struct copies; OR in the new bits instead. * That way if we get behind, we don't lose anything. * We don't actually do any processing here, we simply flag the bottom-half to do the heavy lifting. */ local_irq_save(flags); if (status & V_FR_IRQSTA) { b4->fifo_irqstatus[0] |= __pci_in8(b4, R_IRQ_FIFO_BL0); b4->fifo_irqstatus[1] |= __pci_in8(b4, R_IRQ_FIFO_BL1); b4->fifo_irqstatus[2] |= __pci_in8(b4, R_IRQ_FIFO_BL2); b4->fifo_irqstatus[3] |= __pci_in8(b4, R_IRQ_FIFO_BL3); b4->fifo_irqstatus[4] |= __pci_in8(b4, R_IRQ_FIFO_BL4); b4->fifo_irqstatus[5] |= __pci_in8(b4, R_IRQ_FIFO_BL5); b4->fifo_irqstatus[6] |= __pci_in8(b4, R_IRQ_FIFO_BL6); b4->fifo_irqstatus[7] |= __pci_in8(b4, R_IRQ_FIFO_BL7); } if (status & V_MISC_IRQSTA) { b4->misc_irqstatus |= __pci_in8(b4, R_IRQ_MISC); } /* * Well, that was the plan. It appears that I can't do this in the bottom half * or I start to see data corruption (too long a time between IRQ and tasklet??) * So, I do the B-channel stuff right here in interrupt context. yuck. */ if (b4->misc_irqstatus & V_TI_IRQ) { hfc_poll_fifos(b4); for (i=0; i < b4->numspans; i++) { if (b4->spans[i].span.flags & DAHDI_FLAG_RUNNING) { dahdi_ec_span(&b4->spans[i].span); dahdi_receive(&b4->spans[i].span); dahdi_transmit(&b4->spans[i].span); } } } /* kick off bottom-half handler */ /* tasklet_hi_schedule(&b4->b4xxp_tlet); */ b4xxp_bottom_half((unsigned long)b4); local_irq_restore(flags); return IRQ_RETVAL(1); } /* * The bottom half of course does all the heavy lifting for the interrupt. * * The original plan was to have the B channel RX FIFO interrupts enabled, and * to do the actual work here. Since that doesn't seem to work so well, we * poll the B channel FIFOs right in the interrupt handler and take care of the B * channel stuff there. The bottom half works for the timer interrupt and D * channel stuff. * * The HFC-4S timer interrupt is used to for several things: * - Update the S/T state machines, expire their timers, etc. * - Provide DAHDI's timing source, if so configured * - Update LEDs */ static void b4xxp_bottom_half(unsigned long data) { struct b4xxp *b4 = (struct b4xxp *)data; int i, j, k, fifo, fifo_low, fifo_high; unsigned char b, b2; if (b4->shutdown) return; /* HFC-4S d-chan fifos 8-11 *** HFC-8S d-chan fifos 16-23 */ if (b4->numspans == 8) { fifo_low = 16; fifo_high = 23; } else { fifo_low = 8; fifo_high = 11; } for (i=0; i < 8; i++) { b = b2 = b4->fifo_irqstatus[i]; for (j=0; j < b4->numspans; j++) { fifo = i*4 + j; if (b & V_IRQ_FIFOx_TX) { if (fifo >= fifo_low && fifo <= fifo_high) { /* d-chan fifos */ /* * WOW I don't like this. * It's bad enough that I have to send a fake frame to get an HDLC TX FIFO interrupt, * but now, I have to loop until the whole frame is read, or I get RX interrupts * (even though the chip says HDLC mode gives an IRQ when a *full frame* is received). * Yuck. It works well, but yuck. */ do { if (IS_B430P(b4)) k = hdlc_tx_frame(&b4->spans[3-(fifo - fifo_low)]); else k = hdlc_tx_frame(&b4->spans[fifo - fifo_low]); } while (k); } else { if (printk_ratelimit()) dev_warn(&b4->pdev->dev, "Got FIFO TX int from non-d-chan FIFO %d??\n", fifo); } } if (b & V_IRQ_FIFOx_RX) { if (fifo >= fifo_low && fifo <= fifo_high) { /* dchan fifos */ /* * I have to loop here until hdlc_rx_frame says there are no more frames waiting. * for whatever reason, the HFC will not generate another interrupt if there are * still HDLC frames waiting to be received. * i.e. I get an int when F1 changes, not when F1 != F2. */ do { if (IS_B430P(b4)) k = hdlc_rx_frame(&b4->spans[3-(fifo - fifo_low)]); else k = hdlc_rx_frame(&b4->spans[fifo - fifo_low]); } while (k); } else { if (printk_ratelimit()) dev_warn(&b4->pdev->dev, "Got FIFO RX int from non-d-chan FIFO %d??\n", fifo); } } b >>= 2; } /* zero the bits we just processed */ b4->fifo_irqstatus[i] &= ~b2; } /* * timer interrupt * every tick (1ms), check the FIFOs and run through the S/T port timers. * every 100ms or so, look for S/T state machine changes. */ if (b4->misc_irqstatus & V_TI_IRQ) { /* * We should check the FIFOs here, but I'm seeing this tasklet getting scheduled FAR too late to be useful. * For now, we're handling that in the IRQ handler itself. (ICK!!) */ b4->ticks++; hfc_update_st_timers(b4); b4xxp_update_leds(b4); /* Poll interface state at 100ms interval */ if (!(b4->ticks % 100)) { b = b4xxp_getreg8(b4, R_SCI); if (b) { for (i=0; i < b4->numspans; i++) { if (b & (1 << i)) { /* physical spans are reversed for b430 */ if (IS_B430P(b4)) hfc_handle_state(&b4->spans[b4->numspans-1-i]); else hfc_handle_state(&b4->spans[i]); } } } } /* We're supposed to kick DAHDI here, too, but again, seeing too much latency between the interrupt and the bottom-half. */ /* clear the timer interrupt flag. */ b4->misc_irqstatus &= ~V_TI_IRQ; } /* * Check for outgoing HDLC frame requests * The HFC does not generate TX interrupts when there is room to send, so * I use an atomic counter that is incremented every time DAHDI wants to send * a frame, and decremented every time I send a frame. It'd be better if I could * just use the interrupt handler, but the HFC seems to trigger a FIFO TX IRQ * only when it has finished sending a frame, not when one can be sent. */ for (i=0; i < b4->numspans; i++) { struct b4xxp_span *bspan = &b4->spans[i]; if (atomic_read(&bspan->hdlc_pending)) { do { k = hdlc_tx_frame(bspan); } while (k); } } } /********************************************************************************* proc stuff *****/ #ifdef CREATE_WCB4XXP_PROCFS_ENTRY static int b4xxp_proc_read_one(char *buf, struct b4xxp *b4) { struct dahdi_chan *chan; int len, i, j; char str[80], sBuf[4096]; *sBuf=0; sprintf(sBuf, "Card %d, PCI identifier %s, IRQ %d\n", b4->cardno + 1, b4->pdev->dev.bus_id, b4->irq); strcat(sBuf,"Tx:\n"); for (j=0; j<(b4->numspans * 2) ; j++) { /* B Channels */ for (i=0; i<(b4->numspans * 3) ; i++) { /* All Channels */ chan = b4->spans[i/3].chans[i%3]; sprintf(str, "%02x ", chan->writechunk[j]); strcat(sBuf, str); } strcat(sBuf, "\n"); } strcat(sBuf, "\nRx:\n"); for (j=0; j < (b4->numspans * 2); j++) { /* B Channels */ for (i=0; i < (b4->numspans * 3); i++) { /* All Channels */ chan = b4->spans[i / 3].chans[i % 3]; sprintf(str, "%02x%c", chan->readchunk[j], (i == 11) ? '\n' : ' '); strcat(sBuf, str); } } strcat(sBuf, "\nPort states:\n"); for (i=0; i < b4->numspans; i++) { int state; char *x; struct b4xxp_span *s = &b4->spans[i]; state = b4xxp_getreg_ra(b4, R_ST_SEL, s->port, A_ST_RD_STA); x = hfc_decode_st_state(b4, s->port, state, 0); sprintf(str, "%s\n", x); strcat(sBuf, str); kfree(x); } len = sprintf(buf, "%s\n%s\nTicks: %ld\n", sBuf, str, b4->ticks); return len; } static int b4xxp_proc_read(char *buf, char **start, off_t offset, int count, int *eof, void *data) { struct b4xxp **b4_cards = data; char sBuf[256]; int i, len; len = sprintf(buf, "WCB4XXP Card Information\n"); for (i=0; b4_cards[i] != NULL; i++) { if (i) len += sprintf(buf + len, "\n-----\n"); len += b4xxp_proc_read_one(buf + len, b4_cards[i]); } *sBuf = 0; strcat(sBuf, "\n-----\n\nAudio: "); #ifdef LOOPBACK_SUPPORTED if (loopback >= 3) strcat(sBuf, "DAHDI and S/T"); else if (loopback == 2) strcat(sBuf, "DAHDI"); else if (loopback == 1) strcat(sBuf, "S/T"); else strcat(sBuf, "not"); strcat(sBuf, " looped back"); #else strcat(sBuf, "not looped back"); #endif if (milliwatt) strcat(sBuf, ", outgoing S/T replaced with mu-law milliwatt tone"); len += sprintf(buf + len, "%s\n", sBuf); if (alarmdebounce) sprintf(sBuf, "Alarms: debounced (%dms)", alarmdebounce); else strcpy(sBuf, "Alarms: not debounced"); len += sprintf(buf + len, "%s\nT1 timer period %dms\nT3 timer period %dms\n", sBuf, timer_1_ms, timer_3_ms); *eof = 1; return len; } #endif /* CREATE_WCB4XXP_PROCFS_ENTRY */ static int b4xxp_startdefaultspan(struct b4xxp *b4) { struct dahdi_lineconfig lc = {0,}; return b4xxp_spanconfig(NULL, &b4->spans[0].span, &lc); } static int __devinit b4xx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { int x, ret; struct b4xxp *b4; struct devtype *dt; dt = (struct devtype *)(ent->driver_data); dev_info(&pdev->dev, "probe called for b4xx...\n"); if ((ret = pci_enable_device(pdev))) goto err_out_disable_pdev; if ((ret = pci_request_regions(pdev, dt->desc))) { dev_err(&pdev->dev, "Unable to request regions!\n"); goto err_out_disable_pdev; } if (!pdev->irq) { /* we better have an IRQ */ dev_err(&pdev->dev, "Device has no associated IRQ?\n"); ret = -EIO; goto err_out_release_regions; } if (!(b4 = kzalloc(sizeof(struct b4xxp), GFP_KERNEL))) { dev_err(&pdev->dev, "Couldn't allocate memory for b4xxp structure!\n"); ret = -ENOMEM; goto err_out_release_regions; } /* card found, enabled and main struct allocated. Fill it out. */ b4->variety = dt->desc; b4->card_type = dt->card_type; b4->pdev = pdev; pci_set_drvdata(pdev, b4); b4->ioaddr = pci_iomap(pdev, 0, 0); b4->addr = pci_iomap(pdev, 1, 0); b4->irq = pdev->irq; spin_lock_init(&b4->reglock); spin_lock_init(&b4->seqlock); spin_lock_init(&b4->fifolock); x = b4xxp_getreg8(b4, R_CHIP_ID); if ((x != 0xc0) && (x != 0x80)) { /* wrong chip? */ dev_err(&pdev->dev, "Unknown/unsupported controller detected (R_CHIP_ID = 0x%02x)\n", x); goto err_out_free_mem; } /* future proofing */ b4->chiprev = b4xxp_getreg8(b4, R_CHIP_RV); /* check for various board-specific flags and modify init as necessary */ /* if (dt->flags & FLAG_XXX) use_flag_somehow(); */ b4->numspans = dt->ports; b4->syncspan = -1; /* sync span is unknown */ if (b4->numspans > MAX_SPANS_PER_CARD) { dev_err(&b4->pdev->dev, "Driver does not know how to handle a %d span card!\n", b4->numspans); goto err_out_free_mem; } dev_info(&b4->pdev->dev, "Identified %s (controller rev %d) at %p, IRQ %i\n", b4->variety, b4->chiprev, b4->ioaddr, b4->irq); /* look for the next free card structure */ for (x=0; x < MAX_B4_CARDS; x++) { if (!cards[x]) break; } if (x >= MAX_B4_CARDS) { dev_err(&pdev->dev, "Attempt to register more than %i cards, aborting!\n", MAX_B4_CARDS); goto err_out_free_mem; } /* update the cards array, make sure the b4xxp struct knows where in the array it is */ b4->cardno = x; cards[x] = b4; b4xxp_init_stage1(b4); if (IS_B430P(b4)) { int version; unsigned long flags; spin_lock_irqsave(&b4->seqlock, flags); hfc_gpio_set(b4, 0x60); version = hfc_sram_read(b4); spin_unlock_irqrestore(&b4->seqlock, flags); dev_info(&b4->pdev->dev, "CPLD ver: %x\n", version); } create_sysfs_files(b4); if (request_irq(pdev->irq, b4xxp_interrupt, IRQF_SHARED, "b4xxp", b4)) { dev_err(&b4->pdev->dev, "Unable to request IRQ %d\n", pdev->irq); ret = -EIO; goto err_out_del_from_card_array; } /* initialize the tasklet structure */ /* TODO: perhaps only one tasklet for any number of cards in the system... don't need one per card I don't think. */ tasklet_init(&b4->b4xxp_tlet, b4xxp_bottom_half, (unsigned long)b4); /* interrupt allocated and tasklet initialized, it's now safe to finish initializing the hardware */ b4xxp_init_stage2(b4); hfc_init_all_st(b4); /* initialize the DAHDI structures, and let DAHDI know it has some new hardware to play with */ b4->ddev = dahdi_create_device(); init_spans(b4); for (x=0; x < b4->numspans; x++) { struct dahdi_span *const s = &b4->spans[x].span; list_add_tail(&s->device_node, &b4->ddev->spans); } b4->ddev->manufacturer = "Digium"; b4->ddev->devicetype = b4->variety; b4->ddev->location = kasprintf(GFP_KERNEL, "PCI Bus %02d Slot %02d", b4->pdev->bus->number, PCI_SLOT(b4->pdev->devfn) + 1); if (!b4->ddev->location) { ret = -ENOMEM; goto err_out_del_from_card_array; } if (dahdi_register_device(b4->ddev, &b4->pdev->dev)) { dev_err(&b4->pdev->dev, "Unable to register device.\n"); goto err_out_unreg_spans; } dev_info(&b4->pdev->dev, "Did not do the highestorder stuff\n"); ret = b4xxp_startdefaultspan(b4); if (ret) goto err_out_unreg_spans; ret = 0; return ret; /* 'x' will have the failing span #. (0-3). We need to unregister everything before it. */ err_out_unreg_spans: dahdi_unregister_device(b4->ddev); b4xxp_init_stage1(b4); /* full reset, re-init to "no-irq" state */ free_irq(pdev->irq, b4); err_out_del_from_card_array: for (x=0; x < MAX_B4_CARDS; x++) { if (cards[x] == b4) { b4->cardno = -1; cards[x] = NULL; break; } } if (x >= MAX_B4_CARDS) dev_err(&pdev->dev, "b4 struct @ %p should be in cards array but isn't?!\n", b4); err_out_free_mem: pci_set_drvdata(pdev, NULL); pci_iounmap(pdev, b4->ioaddr); pci_iounmap(pdev, b4->addr); kfree(b4->ddev->location); dahdi_free_device(b4->ddev); kfree(b4); err_out_release_regions: pci_release_regions(pdev); err_out_disable_pdev: pci_disable_device(pdev); return ret; } static void __devexit b4xxp_remove(struct pci_dev *pdev) { struct b4xxp *b4 = pci_get_drvdata(pdev); if (b4) { b4->shutdown = 1; dahdi_unregister_device(b4->ddev); b4xxp_init_stage1(b4); remove_sysfs_files(b4); free_irq(pdev->irq, b4); pci_set_drvdata(pdev, NULL); pci_iounmap(pdev, b4->ioaddr); pci_iounmap(pdev, b4->addr); pci_release_regions(pdev); pci_disable_device(pdev); b4->ioaddr = b4->addr = NULL; tasklet_kill(&b4->b4xxp_tlet); kfree(b4->ddev->location); dahdi_free_device(b4->ddev); kfree(b4); } dev_info(&pdev->dev, "Driver unloaded.\n"); return; } static DEFINE_PCI_DEVICE_TABLE(b4xx_ids) = { {0xd161, 0xb410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long)&wcb41xp}, {0xd161, 0x8014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long)&wcb43xp}, {0xd161, 0x8015, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long)&wcb43xp}, {0x1397, 0x16b8, 0x1397, 0xb552, 0, 0, (unsigned long)&hfc8s}, {0x1397, 0x16b8, 0x1397, 0xb55b, 0, 0, (unsigned long)&hfc8s}, {0x1397, 0x08b4, 0x1397, 0xb520, 0, 0, (unsigned long)&hfc4s}, {0x1397, 0x08b4, 0x1397, 0xb550, 0, 0, (unsigned long)&hfc4s}, {0x1397, 0x08b4, 0x1397, 0xb752, 0, 0, (unsigned long)&hfc4s}, {0x1397, 0x08b4, 0x1397, 0xb556, 0, 0, (unsigned long)&hfc2s}, {0x1397, 0x08b4, 0x1397, 0xe884, 0, 0, (unsigned long)&hfc2s_OV}, {0x1397, 0x08b4, 0x1397, 0xe888, 0, 0, (unsigned long)&hfc4s_OV}, {0x1397, 0x16b8, 0x1397, 0xe998, 0, 0, (unsigned long)&hfc8s_OV}, {0x1397, 0x08b4, 0x1397, 0xb566, 0, 0, (unsigned long)&hfc2s_BN}, {0x1397, 0x08b4, 0x1397, 0xb761, 0, 0, (unsigned long)&hfc2s_BN}, {0x1397, 0x08b4, 0x1397, 0xb560, 0, 0, (unsigned long)&hfc4s_BN}, {0x1397, 0x08b4, 0x1397, 0xb550, 0, 0, (unsigned long)&hfc4s_BN}, {0x1397, 0x08b4, 0x1397, 0xb762, 0, 0, (unsigned long)&hfc4s_BN}, {0x1397, 0x16b8, 0x1397, 0xb562, 0, 0, (unsigned long)&hfc8s_BN}, {0x1397, 0x16b8, 0x1397, 0xb56b, 0, 0, (unsigned long)&hfc8s_BN}, {0x1397, 0x08b4, 0x1397, 0xb540, 0, 0, (unsigned long)&hfc4s_SW}, {0x1397, 0x08b4, 0x1397, 0x08b4, 0, 0, (unsigned long)&hfc4s_EV}, {0, } }; static int b4xx_suspend(struct pci_dev *pdev, pm_message_t state) { return -ENOSYS; } static struct pci_driver b4xx_driver = { .name = "wcb4xxp", .probe = b4xx_probe, .remove = __devexit_p(b4xxp_remove), .id_table = b4xx_ids, .suspend = b4xx_suspend, }; static int __init b4xx_init(void) { #ifdef CREATE_WCB4XXP_PROCFS_ENTRY if (!(myproc = create_proc_read_entry(PROCFS_NAME, 0444, NULL, b4xxp_proc_read, cards))) { printk(KERN_ERR "%s: ERROR: Could not initialize /proc/%s\n",THIS_MODULE->name, PROCFS_NAME); } #endif if (dahdi_pci_module(&b4xx_driver)) return -ENODEV; return 0; } static void __exit b4xx_exit(void) { #ifdef CREATE_WCB4XXP_PROCFS_ENTRY remove_proc_entry(PROCFS_NAME, NULL); #endif pci_unregister_driver(&b4xx_driver); } module_param(debug, int, S_IRUGO | S_IWUSR); module_param(spanfilter, int, S_IRUGO | S_IWUSR); #ifdef LOOPBACK_SUPPORTED module_param(loopback, int, S_IRUGO | S_IWUSR); #endif module_param(milliwatt, int, S_IRUGO | S_IWUSR); module_param(pedanticpci, int, S_IRUGO); module_param(teignorered, int, S_IRUGO | S_IWUSR); module_param(alarmdebounce, int, S_IRUGO | S_IWUSR); module_param(vpmsupport, int, S_IRUGO); module_param(timer_1_ms, int, S_IRUGO | S_IWUSR); module_param(timer_3_ms, int, S_IRUGO | S_IWUSR); module_param(companding, charp, S_IRUGO); module_param(persistentlayer1, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "bitmap: 1=general 2=dtmf 4=regops 8=fops 16=ec 32=st state 64=hdlc 128=alarm"); MODULE_PARM_DESC(spanfilter, "debug filter for spans. bitmap: 1=port 1, 2=port 2, 4=port 3, 8=port 4"); #ifdef LOOPBACK_SUPPORTED MODULE_PARM_DESC(loopback, "TODO: bitmap: 1=loop back S/T port 2=loop back DAHDI"); #endif MODULE_PARM_DESC(milliwatt, "1=replace outgoing S/T data with mu-law milliwatt"); MODULE_PARM_DESC(pedanticpci, "1=disable PCI back-to-back transfers and flush all PCI writes immediately"); MODULE_PARM_DESC(teignorered, "1=ignore (do not inform DAHDI) if a red alarm exists in TE mode"); MODULE_PARM_DESC(alarmdebounce, "msec to wait before set/clear alarm condition"); MODULE_PARM_DESC(vpmsupport, "1=enable hardware EC, 0=disable hardware EC"); MODULE_PARM_DESC(timer_1_ms, "NT: msec to wait for link activation, TE: unused."); MODULE_PARM_DESC(timer_3_ms, "TE: msec to wait for link activation, NT: unused."); MODULE_PARM_DESC(companding, "Change the companding to \"alaw\" or \"ulaw\""\ "(alaw by default)"); MODULE_AUTHOR("Digium Incorporated "); MODULE_DESCRIPTION("B410P & Similars multi-port BRI module driver."); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, b4xx_ids); module_init(b4xx_init); module_exit(b4xx_exit);