/* * Written by Oron Peled * Copyright (C) 2004-2006, Xorcom * * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #include #include #include #include #include #include #include /* for udelay */ #include #include #include #include #include #include #include "xpd.h" #include "xproto.h" #include "xbus-core.h" #include "xframe_queue.h" #ifdef DEBUG #include "card_fxs.h" #include "card_fxo.h" #endif #include "parport_debug.h" static const char rcsid[] = "$Id$"; static DEF_PARM(int, debug, 0, 0644, "Print DBG statements"); /* must be before dahdi_debug.h */ static DEF_PARM(int, usb1, 0, 0644, "Allow using USB 1.1 interfaces"); static DEF_PARM(uint, tx_sluggish, 2000, 0644, "A sluggish transmit (usec)"); static DEF_PARM(uint, drop_pcm_after, 6, 0644, "Number of consecutive tx_sluggish to drop a PCM frame"); #include "dahdi_debug.h" #define XUSB_PRINTK(level, xusb, fmt, ...) \ printk(KERN_ ## level "%s-%s: xusb-%d (%s) [%s]: " fmt, #level, \ THIS_MODULE->name, (xusb)->index, xusb->path, xusb->serial, ## __VA_ARGS__) #define XUSB_DBG(bits, xusb, fmt, ...) \ ((void)((debug & (DBG_ ## bits)) && XUSB_PRINTK(DEBUG, xusb, "%s: " fmt, __func__, ## __VA_ARGS__))) #define XUSB_ERR(xusb, fmt, ...) XUSB_PRINTK(ERR, xusb, fmt, ## __VA_ARGS__) #define XUSB_NOTICE(xusb, fmt, ...) XUSB_PRINTK(NOTICE, xusb, fmt, ## __VA_ARGS__) #define XUSB_INFO(xusb, fmt, ...) XUSB_PRINTK(INFO, xusb, fmt, ## __VA_ARGS__) /* FIXME: A flag that was deprecated at some point, and rather useless */ /* anyway. Only used in the code or-ed to other flags */ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14) # define URB_ASYNC_UNLINK 0 #endif /* Get a minor range for your devices from the usb maintainer */ #define USB_SKEL_MINOR_BASE 192 #ifdef CONFIG_PROC_FS #define PROC_USBXPP_SUMMARY "xpp_usb" #endif #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) # warning "This module is tested only with 2.6 kernels" #endif #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) # define usb_alloc_coherent(dev, size, mem_flags, dma) \ usb_buffer_alloc(dev, size, mem_flags, dma) # define usb_free_coherent(dev, size, addr, dma) \ usb_buffer_free(dev, size, addr, dma) #endif #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) # undef USB_FIELDS_MISSING #else # define USB_FIELDS_MISSING # define USB_MAX_STRING 128 # define USB_GET_STRING(udev,field,buf) \ do { \ if ((udev)->descriptor.field) { \ char tmp[USB_MAX_STRING]; \ if (usb_string((udev), (udev)->descriptor.field, tmp, sizeof(tmp)) > 0) \ snprintf((buf), USB_MAX_STRING, "%s", tmp); \ } \ } while (0); # define USB_GET_IFACE_NAME(udev,iface,buf) \ do { \ if ((iface)->desc.iInterface) { \ char tmp[USB_MAX_STRING]; \ if (usb_string((udev), (iface)->desc.iInterface, tmp, sizeof(tmp)) > 0) \ snprintf((buf), USB_MAX_STRING, "%s", tmp); \ } \ } while (0); #endif #ifdef DEBUG_PCM_TIMING static cycles_t stamp_last_pcm_read; static cycles_t accumulate_diff; #endif struct xusb_model_info; struct xusb_endpoint { int ep_addr; int max_size; usb_complete_t callback; }; enum xusb_dir { XUSB_RECV = 0, XUSB_SEND = 1, }; static __must_check int xframe_send_pcm(xbus_t *xbus, xframe_t *xframe); static __must_check int xframe_send_cmd(xbus_t *xbus, xframe_t *xframe); static __must_check xframe_t *alloc_xframe(xbus_t *xbus, gfp_t flags); static void free_xframe(xbus_t *xbus, xframe_t *frm); static struct xbus_ops xusb_ops = { .xframe_send_pcm = xframe_send_pcm, .xframe_send_cmd = xframe_send_cmd, .alloc_xframe = alloc_xframe, .free_xframe = free_xframe, }; enum { XUSB_N_RX_FRAMES, XUSB_N_TX_FRAMES, XUSB_N_RX_ERRORS, XUSB_N_TX_ERRORS, XUSB_N_RCV_ZERO_LEN, }; #define XUSB_COUNTER(xusb, counter) ((xusb)->counters[XUSB_N_ ## counter]) #define C_(x) [ XUSB_N_ ## x ] = { #x } static struct xusb_counters { char *name; } xusb_counters[] = { C_(RX_FRAMES), C_(TX_FRAMES), C_(RX_ERRORS), C_(TX_ERRORS), C_(RCV_ZERO_LEN), }; #undef C_ #define XUSB_COUNTER_MAX ARRAY_SIZE(xusb_counters) #define MAX_PENDING_WRITES 100 static KMEM_CACHE_T *xusb_cache; typedef struct xusb xusb_t; /* * A uframe is our low level representation of a frame. * * It contains the metadata for the usb stack (a urb) * and the metadata for the xbus-core (an xframe) * as well as pointing to the data (transfer_buffer, transfer_buffer_length) * directionality (send/receive) and ownership (xusb). */ struct uframe { unsigned long uframe_magic; #define UFRAME_MAGIC 654321L struct urb urb; xframe_t xframe; size_t transfer_buffer_length; void *transfer_buffer; /* max XFRAME_DATASIZE */ xusb_t *xusb; }; #define urb_to_uframe(urb) container_of(urb, struct uframe, urb) #define xframe_to_uframe(xframe) container_of(xframe, struct uframe, xframe) #define xusb_of(xbus) ((xusb_t *)((xbus)->transport.priv)) #define USEC_BUCKET 100 /* usec */ #define NUM_BUCKETS 15 #define BUCKET_START (500/USEC_BUCKET) /* skip uninteresting */ /* * USB XPP Bus (a USB Device) */ struct xusb { uint xbus_num; struct usb_device *udev; /* save off the usb device pointer */ struct usb_interface *interface; /* the interface for this device */ unsigned char minor; /* the starting minor number for this device */ uint index; char path[XBUS_DESCLEN]; /* a unique path */ struct xusb_model_info *model_info; struct xusb_endpoint endpoints[2]; /* RECV/SEND endpoints */ int present; /* if the device is not disconnected */ atomic_t pending_writes; /* submited but not out yet */ atomic_t pending_reads; /* submited but not in yet */ struct semaphore sem; /* locks this structure */ int counters[XUSB_COUNTER_MAX]; /* metrics */ struct timeval last_tx; unsigned int max_tx_delay; uint usb_tx_delay[NUM_BUCKETS]; uint sluggish_debounce; bool drop_next_pcm; /* due to sluggishness */ atomic_t pcm_tx_drops; atomic_t usb_sluggish_count; #ifdef USB_FIELDS_MISSING /* storage for missing strings in old kernels */ char manufacturer[USB_MAX_STRING]; char product[USB_MAX_STRING]; char serial[USB_MAX_STRING]; char interface_name[USB_MAX_STRING]; #else const char *manufacturer; const char *product; const char *serial; const char *interface_name; #endif }; static DEFINE_SPINLOCK(xusb_lock); static xusb_t *xusb_array[MAX_BUSES] = {}; static unsigned bus_count; /* prevent races between open() and disconnect() */ static DEFINE_SEMAPHORE(disconnect_sem); /* * AsteriskNow kernel has backported the "lean" callback from 2.6.20 * to 2.6.19 without any macro to notify of this fact -- how lovely. * Debian-Etch and Centos5 are using 2.6.18 for now (lucky for us). * Fedora6 jumped from 2.6.18 to 2.6.20. So far luck is on our side ;-) */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) #define USB_PASS_CB(u) struct urb *u, struct pt_regs *regs #else #define USB_PASS_CB(u) struct urb *u #endif static void xpp_send_callback(USB_PASS_CB(urb)); static void xpp_receive_callback(USB_PASS_CB(urb)); static int xusb_probe (struct usb_interface *interface, const struct usb_device_id *id); static void xusb_disconnect (struct usb_interface *interface); #ifdef CONFIG_PROC_FS static int xusb_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data); #endif /*------------------------------------------------------------------*/ /* * Updates the urb+xframe metadata from the uframe information. */ static void uframe_recompute(struct uframe *uframe, enum xusb_dir dir) { struct urb *urb = &uframe->urb; xusb_t *xusb = uframe->xusb; struct usb_device *udev = xusb->udev; struct xusb_endpoint *xusb_ep = &xusb->endpoints[dir]; unsigned int ep_addr = xusb_ep->ep_addr; usb_complete_t urb_cb = xusb_ep->callback; unsigned int epnum = ep_addr & USB_ENDPOINT_NUMBER_MASK; int pipe = usb_pipein(ep_addr) ? usb_rcvbulkpipe(udev, epnum) : usb_sndbulkpipe(udev, epnum); BUG_ON(uframe->uframe_magic != UFRAME_MAGIC); usb_fill_bulk_urb(urb, udev, pipe, uframe->transfer_buffer, uframe->transfer_buffer_length, urb_cb, uframe); urb->transfer_flags = (URB_NO_TRANSFER_DMA_MAP | URB_ASYNC_UNLINK); } static xframe_t *alloc_xframe(xbus_t *xbus, gfp_t gfp_flags) { struct uframe *uframe; xusb_t *xusb; void *p; int size; static int rate_limit; BUG_ON(!xbus); xusb = xusb_of(xbus); BUG_ON(!xusb); if (!xusb->present) { if ((rate_limit++ % 1003) == 0) XUSB_ERR(xusb, "abort allocations during device disconnect (%d)\n", rate_limit); return NULL; } size = min(xusb->endpoints[XUSB_SEND].max_size, xusb->endpoints[XUSB_RECV].max_size); uframe = kmem_cache_alloc(xusb_cache, gfp_flags); if (!uframe) { if ((rate_limit++ % 1003) == 0) XUSB_ERR(xusb, "frame allocation failed (%d)\n", rate_limit); return NULL; } usb_init_urb(&uframe->urb); p = usb_alloc_coherent(xusb->udev, size, gfp_flags, &uframe->urb.transfer_dma); if (!p) { if ((rate_limit++ % 1003) == 0) XUSB_ERR(xusb, "buffer allocation failed (%d)\n", rate_limit); kmem_cache_free(xusb_cache, uframe); return NULL; } uframe->uframe_magic = UFRAME_MAGIC; uframe->transfer_buffer_length = size; uframe->transfer_buffer = p; uframe->xusb = xusb; xframe_init(xbus, &uframe->xframe, uframe->transfer_buffer, uframe->transfer_buffer_length, uframe); return &uframe->xframe; } static void free_xframe(xbus_t *xbus, xframe_t *xframe) { struct uframe *uframe = xframe_to_uframe(xframe); struct urb *urb = &uframe->urb; BUG_ON(xbus->transport.priv != uframe->xusb); //XUSB_INFO(uframe->xusb, "frame_free\n"); usb_free_coherent(urb->dev, uframe->transfer_buffer_length, urb->transfer_buffer, urb->transfer_dma); memset(uframe, 0, sizeof(*uframe)); kmem_cache_free(xusb_cache, uframe); } /*------------------------------------------------------------------*/ /* * Actuall frame sending -- both PCM and commands. */ static int do_send_xframe(xbus_t *xbus, xframe_t *xframe) { struct urb *urb; xusb_t *xusb; int ret = 0; struct uframe *uframe; BUG_ON(!xframe); BUG_ON(xframe->xframe_magic != XFRAME_MAGIC); xusb = xusb_of(xbus); BUG_ON(!xusb); if (!xusb->present) { static int rate_limit; if ((rate_limit++ % 1003) == 0) XUSB_ERR(xusb, "abort do_send_xframe during device disconnect (%d)\n", rate_limit); ret = -ENODEV; goto failure; } /* * If something really bad happend, do not overflow the USB stack */ if (atomic_read(&xusb->pending_writes) > MAX_PENDING_WRITES) { static int rate_limit; if ((rate_limit++ % 5000) == 0) XUSB_ERR(xusb, "USB device is totaly stuck. Dropping packets (#%d).\n", rate_limit); ret = -ENODEV; goto failure; } uframe = xframe->priv; BUG_ON(!uframe); BUG_ON(uframe->uframe_magic != UFRAME_MAGIC); uframe_recompute(uframe, XUSB_SEND); urb = &uframe->urb; BUG_ON(!urb); /* update urb length */ urb->transfer_buffer_length = XFRAME_LEN(xframe); do_gettimeofday(&xframe->tv_submitted); ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret < 0) { static int rate_limit; if ((rate_limit++ % 1000) == 0) XBUS_ERR(xbus, "%s: usb_submit_urb failed: %d\n", __func__, ret); ret = -EBADF; goto failure; } // if (debug) // dump_xframe("USB_FRAME_SEND", xbus, xframe, debug); atomic_inc(&xusb->pending_writes); return 0; failure: XUSB_COUNTER(xusb, TX_ERRORS)++; FREE_SEND_XFRAME(xbus, xframe); /* return to pool */ return ret; } /* * PCM wrapper */ static int xframe_send_pcm(xbus_t *xbus, xframe_t *xframe) { xusb_t *xusb; BUG_ON(!xbus); BUG_ON(!xframe); xusb = xusb_of(xbus); BUG_ON(!xusb); if (xusb->drop_next_pcm) { FREE_SEND_XFRAME(xbus, xframe); /* return to pool */ xusb->drop_next_pcm = 0; return -EIO; } return do_send_xframe(xbus, xframe); } /* * commands wrapper */ static int xframe_send_cmd(xbus_t *xbus, xframe_t *xframe) { BUG_ON(!xbus); BUG_ON(!xframe); //XBUS_INFO(xbus, "%s:\n", __func__); return do_send_xframe(xbus, xframe); } /* * get a urb from the receive_pool and submit it on the read endpoint. */ static bool xusb_listen(xusb_t *xusb) { xbus_t *xbus = xbus_num(xusb->xbus_num); xframe_t *xframe; struct uframe *uframe; int ret = 0; BUG_ON(!xbus); xframe = ALLOC_RECV_XFRAME(xbus); if (!xframe) { XBUS_ERR(xbus, "Empty receive_pool\n"); goto out; } uframe = xframe_to_uframe(xframe); uframe_recompute(uframe, XUSB_RECV); ret = usb_submit_urb(&uframe->urb, GFP_ATOMIC); if (ret < 0) { static int rate_limit; if ((rate_limit++ % 1000) == 0) XBUS_ERR(xbus, "%s: usb_submit_urb failed: %d\n", __func__, ret); FREE_RECV_XFRAME(xbus, xframe); goto out; } atomic_inc(&xusb->pending_reads); ret = 1; out: return ret; } /*------------------------- XPP USB Bus Handling -------------------*/ enum XUSB_MODELS { MODEL_FPGA_XPD }; static const struct xusb_model_info { const char *desc; int iface_num; struct xusb_endpoint in; struct xusb_endpoint out; } model_table[] = { [MODEL_FPGA_XPD] = { .iface_num = 0, .in = { .ep_addr = 0x86 }, .out = { .ep_addr = 0x02 }, .desc = "FPGA_XPD" }, }; /* table of devices that work with this driver */ static const struct usb_device_id xusb_table [] = { { USB_DEVICE(0xE4E4, 0x1132), .driver_info=(kernel_ulong_t)&model_table[MODEL_FPGA_XPD] }, // FPGA_FXS { USB_DEVICE(0xE4E4, 0x1142), .driver_info=(kernel_ulong_t)&model_table[MODEL_FPGA_XPD] }, // FPGA_1141 { USB_DEVICE(0xE4E4, 0x1152), .driver_info=(kernel_ulong_t)&model_table[MODEL_FPGA_XPD] }, // FPGA_1151 { USB_DEVICE(0xE4E4, 0x1162), .driver_info=(kernel_ulong_t)&model_table[MODEL_FPGA_XPD] }, // FPGA_1161 { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, xusb_table); /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver xusb_driver = { #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) .owner = THIS_MODULE, #endif .name = "xpp_usb", .probe = xusb_probe, .disconnect = xusb_disconnect, .id_table = xusb_table, }; /* * File operations needed when we register this driver. * This assumes that this driver NEEDS file operations, * of course, which means that the driver is expected * to have a node in the /dev directory. If the USB * device were for a network interface then the driver * would use "struct net_driver" instead, and a serial * device would use "struct tty_driver". */ static struct file_operations xusb_fops = { /* * The owner field is part of the module-locking * mechanism. The idea is that the kernel knows * which module to increment the use-counter of * BEFORE it calls the device's open() function. * This also means that the kernel can decrement * the use-counter again before calling release() * or should the open() function fail. */ .owner = THIS_MODULE, }; /* * usb class driver info in order to get a minor number from the usb core, * and to have the device registered with devfs and the driver core */ static struct usb_class_driver xusb_class = { .name = "usb/xpp_usb%d", .fops = &xusb_fops, /* FIXME: The sysfs class interfase seems to have chaged around here */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH, #endif .minor_base = USB_SKEL_MINOR_BASE, }; /* * Check that an endpoint's wMaxPacketSize attribute is 512. This * indicates that it is a USB2's high speed end point. * * If it is 64, it means we have a USB1 controller. By default we do not * support it and just fail the probe of the device. However if the user * has set usb1=1, we continue and just put a notice. * * Returns true if all OK, false otherwise. */ static int check_usb1(struct usb_endpoint_descriptor *endpoint) { const char *msg = (usb_pipein(endpoint->bEndpointAddress))?"input":"output"; if (endpoint->wMaxPacketSize >= sizeof(xpacket_t)) return 1; if (usb1) { NOTICE("USB1 endpoint detected: USB %s endpoint 0x%X support only wMaxPacketSize=%d.\n", msg, endpoint->bEndpointAddress, endpoint->wMaxPacketSize); return 1; } NOTICE("USB1 endpoint detected. Device disabled. To enable: usb1=1, and read docs. (%s, endpoint %d, size %d).\n", msg, endpoint->bEndpointAddress, endpoint->wMaxPacketSize); return 0; } /* * set up the endpoint information * check out the endpoints * FIXME: Should be simplified (above 2.6.10) to use usb_dev->ep_in[0..16] and usb_dev->ep_out[0..16] */ static int set_endpoints(xusb_t *xusb, struct usb_host_interface *iface_desc, struct xusb_model_info *model_info) { struct usb_endpoint_descriptor *endpoint; struct xusb_endpoint *xusb_ep; int ep_addr; int i; #define BULK_ENDPOINT(ep) (((ep)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; ep_addr = endpoint->bEndpointAddress; if (!BULK_ENDPOINT(endpoint)) { DBG(DEVICES, "endpoint 0x%x is not bulk: mbAttributes=0x%X\n", ep_addr, endpoint->bmAttributes); continue; } if (usb_pipein(ep_addr)) { // Input if (ep_addr == model_info->in.ep_addr) { if (!check_usb1(endpoint)) return 0; xusb_ep = &xusb->endpoints[XUSB_RECV]; xusb_ep->ep_addr = ep_addr; xusb_ep->max_size = endpoint->wMaxPacketSize; xusb_ep->callback = xpp_receive_callback; } } else { // Output if (ep_addr == model_info->out.ep_addr) { if (!check_usb1(endpoint)) return 0; xusb_ep = &xusb->endpoints[XUSB_SEND]; xusb_ep->ep_addr = ep_addr; xusb_ep->max_size = endpoint->wMaxPacketSize; xusb_ep->callback = xpp_send_callback; } } } if (!xusb->endpoints[XUSB_RECV].ep_addr || !xusb->endpoints[XUSB_SEND].ep_addr) { XUSB_ERR(xusb, "Couldn't find bulk-in or bulk-out endpoints\n"); return 0; } DBG(DEVICES, "in=0x%02X out=0x%02X\n", xusb->endpoints[XUSB_RECV].ep_addr, xusb->endpoints[XUSB_SEND].ep_addr); return 1; } /* * The USB stack before 2.6.10 seems to be a bit shoddy. It seems that when * being called from the probe we may already have the lock to udev (the Usb DEVice). * Thus we call the internal __usb_reset_device instead. */ #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) #define DO_USB_RESET_DEVICE(dev) __usb_reset_device(dev) #else #define DO_USB_RESET_DEVICE(dev) usb_reset_device(dev) #endif /** * xusb_probe * * Called by the usb core when a new device is connected that it thinks * this driver might be interested in. */ static int xusb_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); struct usb_host_interface *iface_desc = usb_altnum_to_altsetting(interface, 0); xusb_t *xusb = NULL; struct xusb_model_info *model_info = (struct xusb_model_info*)id->driver_info; #ifdef CONFIG_PROC_FS struct proc_dir_entry *procsummary = NULL; #endif xbus_t *xbus = NULL; unsigned long flags; int retval = -ENOMEM; int i; DBG(DEVICES, "New XUSB device MODEL=%s\n", model_info->desc); if (iface_desc->desc.bInterfaceNumber != model_info->iface_num) { DBG(DEVICES, "Skip interface #%d != #%d\n", iface_desc->desc.bInterfaceNumber, model_info->iface_num); return -ENODEV; } if ((retval = DO_USB_RESET_DEVICE(udev)) < 0) { ERR("usb_reset_device failed: %d\n", retval); goto probe_failed; } if (!model_info) { ERR("Missing endpoint setup for this device %d:%d\n", udev->descriptor.idVendor,udev->descriptor.idProduct); retval = -ENODEV; goto probe_failed; } /* allocate memory for our device state and initialize it */ xusb = KZALLOC(sizeof(xusb_t), GFP_KERNEL); if (xusb == NULL) { ERR("xpp_usb: Unable to allocate new xpp usb bus\n"); retval = -ENOMEM; goto probe_failed; } sema_init(&xusb->sem, 1); atomic_set(&xusb->pending_writes, 0); atomic_set(&xusb->pending_reads, 0); atomic_set(&xusb->pcm_tx_drops, 0); atomic_set(&xusb->usb_sluggish_count, 0); xusb->udev = udev; xusb->interface = interface; xusb->model_info = model_info; if (!set_endpoints(xusb, iface_desc, model_info)) { retval = -ENODEV; goto probe_failed; } #ifndef USB_FIELDS_MISSING xusb->serial = udev->serial; xusb->manufacturer = udev->manufacturer; xusb->product = udev->product; xusb->interface_name = iface_desc->string; #else USB_GET_STRING(udev, iSerialNumber, xusb->serial); USB_GET_STRING(udev, iManufacturer, xusb->manufacturer); USB_GET_STRING(udev, iProduct, xusb->product); USB_GET_IFACE_NAME(udev, iface_desc, xusb->interface_name); #endif INFO("XUSB: %s -- %s -- %s\n", xusb->manufacturer, xusb->product, xusb->interface_name); /* allow device read, write and ioctl */ xusb->present = 1; /* we can register the device now, as it is ready */ usb_set_intfdata(interface, xusb); retval = usb_register_dev (interface, &xusb_class); if (retval) { /* something prevented us from registering this driver */ ERR ("Not able to get a minor for this device.\n"); goto probe_failed; } xusb->minor = interface->minor; /* let the user know what node this device is now attached to */ DBG(DEVICES, "USB XPP device now attached to minor %d\n", xusb->minor); xbus = xbus_new(&xusb_ops, min(xusb->endpoints[XUSB_SEND].max_size, xusb->endpoints[XUSB_RECV].max_size), &udev->dev, xusb); if (!xbus) { retval = -ENOMEM; goto probe_failed; } snprintf(xbus->transport.model_string, ARRAY_SIZE(xbus->transport.model_string), "usb:%04x/%04x/%x", udev->descriptor.idVendor, udev->descriptor.idProduct, udev->descriptor.bcdDevice); spin_lock_irqsave(&xusb_lock, flags); for (i = 0; i < MAX_BUSES; i++) { if (xusb_array[i] == NULL) break; } spin_unlock_irqrestore(&xusb_lock, flags); if (i >= MAX_BUSES) { ERR("xpp_usb: Too many XPP USB buses\n"); retval = -ENOMEM; goto probe_failed; } usb_make_path(udev, xusb->path, XBUS_DESCLEN); // May trunacte... ignore snprintf(xbus->connector, XBUS_DESCLEN, "%s", xusb->path); if (xusb->serial && xusb->serial[0]) snprintf(xbus->label, LABEL_SIZE, "usb:%s", xusb->serial); xusb->index = i; xusb_array[i] = xusb; XUSB_DBG(DEVICES, xusb, "GOT XPP USB BUS: %s\n", xbus->connector); #ifdef CONFIG_PROC_FS DBG(PROC, "Creating proc entry " PROC_USBXPP_SUMMARY " in bus proc dir.\n"); procsummary = create_proc_read_entry(PROC_USBXPP_SUMMARY, 0444, xbus->proc_xbus_dir, xusb_read_proc, xusb); if (!procsummary) { XBUS_ERR(xbus, "Failed to create proc file '%s'\n", PROC_USBXPP_SUMMARY); // FIXME: better error handling retval = -EIO; goto probe_failed; } SET_PROC_DIRENTRY_OWNER(procsummary); #endif bus_count++; xusb->xbus_num = xbus->num; /* prepare several pending frames for receive side */ for (i = 0; i < 10; i++) xusb_listen(xusb); xbus_connect(xbus); return retval; probe_failed: ERR("Failed to initialize xpp usb bus: %d\n", retval); usb_set_intfdata(interface, NULL); if (xusb) { if (xusb->minor) { // passed registration phase ERR("Calling usb_deregister_dev()\n"); usb_deregister_dev(interface, &xusb_class); } ERR("Removing failed xusb\n"); KZFREE(xusb); } if (xbus) { #ifdef CONFIG_PROC_FS if (procsummary) { XBUS_DBG(PROC, xbus, "Remove proc_entry: " PROC_USBXPP_SUMMARY "\n"); remove_proc_entry(PROC_USBXPP_SUMMARY, xbus->proc_xbus_dir); procsummary = NULL; } #endif ERR("Calling xbus_disconnect()\n"); xbus_disconnect(xbus); // Blocking until fully deactivated! } return retval; } /** * xusb_disconnect * * Called by the usb core when the device is removed from the system. * * This routine guarantees that the driver will not submit any more urbs * by clearing dev->udev. It is also supposed to terminate any currently * active urbs. Unfortunately, usb_bulk_msg(), used in xusb_read(), does * not provide any way to do this. But at least we can cancel an active * write. */ static void xusb_disconnect(struct usb_interface *interface) { struct usb_host_interface *iface_desc = usb_altnum_to_altsetting(interface, 0); xusb_t *xusb; xbus_t *xbus; int i; DBG(DEVICES, "CALLED on interface #%d\n", iface_desc->desc.bInterfaceNumber); /* prevent races with open() */ down (&disconnect_sem); xusb = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); xusb->present = 0; xbus = xbus_num(xusb->xbus_num); /* find our xusb */ for (i = 0; i < MAX_BUSES; i++) { if (xusb_array[i] == xusb) break; } BUG_ON(i >= MAX_BUSES); xusb_array[i] = NULL; #ifdef CONFIG_PROC_FS if (xbus->proc_xbus_dir) { XBUS_DBG(PROC, xbus, "Remove proc_entry: " PROC_USBXPP_SUMMARY "\n"); remove_proc_entry(PROC_USBXPP_SUMMARY, xbus->proc_xbus_dir); } #endif xbus_disconnect(xbus); // Blocking until fully deactivated! down (&xusb->sem); /* give back our minor */ usb_deregister_dev(interface, &xusb_class); up (&xusb->sem); DBG(DEVICES, "Semaphore released\n"); XUSB_INFO(xusb, "now disconnected\n"); KZFREE(xusb); up (&disconnect_sem); } static void xpp_send_callback(USB_PASS_CB(urb)) { struct uframe *uframe = urb_to_uframe(urb); xframe_t *xframe = &uframe->xframe; xusb_t *xusb = uframe->xusb; xbus_t *xbus = xbus_num(xusb->xbus_num); struct timeval now; long usec; int writes = atomic_read(&xusb->pending_writes); int i; if (!xbus) { XUSB_ERR(xusb, "Sent URB does not belong to a valid xbus anymore...\n"); return; } //flip_parport_bit(6); atomic_dec(&xusb->pending_writes); do_gettimeofday(&now); xusb->last_tx = xframe->tv_submitted; usec = usec_diff(&now, &xframe->tv_submitted); if (usec > xusb->max_tx_delay) xusb->max_tx_delay = usec; i = usec / USEC_BUCKET; if (i >= NUM_BUCKETS) i = NUM_BUCKETS - 1; xusb->usb_tx_delay[i]++; if (unlikely(usec > tx_sluggish)) { atomic_inc(&xusb->usb_sluggish_count); if (xusb->sluggish_debounce++ > drop_pcm_after) { static int rate_limit; if ((rate_limit++ % 1003) == 500) /* skip first messages */ XUSB_NOTICE(xusb, "Sluggish USB. Dropping next PCM frame (pending_writes=%d)\n", writes); atomic_inc(&xusb->pcm_tx_drops); xusb->drop_next_pcm = 1; xusb->sluggish_debounce = 0; } } else xusb->sluggish_debounce = 0; /* sync/async unlink faults aren't errors */ if (urb->status && !(urb->status == -ENOENT || urb->status == -ECONNRESET)) { static int rate_limit; if ((rate_limit++ % 1000) < 10) { XUSB_ERR(xusb, "nonzero write bulk status received: %d (pending_writes=%d)\n", urb->status, writes); dump_xframe("usb-write-error", xbus, xframe, DBG_ANY); } XUSB_COUNTER(xusb, TX_ERRORS)++; } else XUSB_COUNTER(xusb, TX_FRAMES)++; FREE_SEND_XFRAME(xbus, xframe); if (!xusb->present) XUSB_ERR(xusb, "A urb from non-connected device?\n"); } static void xpp_receive_callback(USB_PASS_CB(urb)) { struct uframe *uframe = urb_to_uframe(urb); xframe_t *xframe = &uframe->xframe; xusb_t *xusb = uframe->xusb; xbus_t *xbus = xbus_num(xusb->xbus_num); size_t size; bool do_resubmit = 1; struct timeval now; do_gettimeofday(&now); atomic_dec(&xusb->pending_reads); if (!xbus) { XUSB_ERR(xusb, "Received URB does not belong to a valid xbus anymore...\n"); return; } if (!xusb->present) { do_resubmit = 0; goto err; } if (urb->status) { DBG(GENERAL, "nonzero read bulk status received: %d\n", urb->status); XUSB_COUNTER(xusb, RX_ERRORS)++; goto err; } size = urb->actual_length; if (size == 0) { static int rate_limit; if ((rate_limit++ % 5003) == 0) XUSB_NOTICE(xusb, "Received a zero length URBs (%d)\n", rate_limit); XUSB_COUNTER(xusb, RCV_ZERO_LEN)++; goto err; } atomic_set(&xframe->frame_len, size); xframe->tv_received = now; // if (debug) // dump_xframe("USB_FRAME_RECEIVE", xbus, xframe, debug); XUSB_COUNTER(xusb, RX_FRAMES)++; /* Send UP */ xbus_receive_xframe(xbus, xframe); end: if (do_resubmit) xusb_listen(xusb); return; err: FREE_RECV_XFRAME(xbus, xframe); goto end; } /*------------------------- Initialization -------------------------*/ static void xpp_usb_cleanup(void) { if (xusb_cache) { kmem_cache_destroy(xusb_cache); xusb_cache = NULL; } } static int __init xpp_usb_init(void) { int ret; //xusb_t *xusb; INFO("revision %s\n", XPP_VERSION); xusb_cache = kmem_cache_create("xusb_cache", sizeof(xframe_t) + XFRAME_DATASIZE, #if (LINUX_VERSION_CODE == KERNEL_VERSION(2,6,22)) && defined(CONFIG_SLUB) 0, SLAB_STORE_USER, #else 0, 0, #endif #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) NULL, #endif NULL); if (!xusb_cache) { ret = -ENOMEM; goto failure; } /* register this driver with the USB subsystem */ ret = usb_register(&xusb_driver); if (ret) { ERR("usb_register failed. Error number %d\n", ret); goto failure; } return 0; failure: xpp_usb_cleanup(); return ret; } static void __exit xpp_usb_shutdown(void) { DBG(GENERAL, "\n"); /* deregister this driver with the USB subsystem */ usb_deregister(&xusb_driver); xpp_usb_cleanup(); } #ifdef CONFIG_PROC_FS static int xusb_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) { int len = 0; unsigned long flags; int i; //unsigned long stamp = jiffies; xusb_t *xusb = data; uint usb_tx_delay[NUM_BUCKETS]; const int mark_limit = tx_sluggish/USEC_BUCKET; if (!xusb) goto out; // TODO: probably needs a per-xusb lock: spin_lock_irqsave(&xusb_lock, flags); len += sprintf(page + len, "Device: %03d/%03d\n", xusb->udev->bus->busnum, xusb->udev->devnum ); len += sprintf(page + len, "USB: manufacturer=%s\n", xusb->manufacturer); len += sprintf(page + len, "USB: product=%s\n", xusb->product); len += sprintf(page + len, "USB: serial=%s\n", xusb->serial); len += sprintf(page + len, "Minor: %d\nModel Info: %s\n", xusb->minor, xusb->model_info->desc); len += sprintf(page + len, "Endpoints:\n" "\tIn: 0x%02X - Size: %d)\n" "\tOut: 0x%02X - Size: %d)\n", xusb->endpoints[XUSB_RECV].ep_addr, xusb->endpoints[XUSB_RECV].max_size, xusb->endpoints[XUSB_SEND].ep_addr, xusb->endpoints[XUSB_SEND].max_size ); len += sprintf(page + len, "\npending_writes=%d\n", atomic_read(&xusb->pending_writes)); len += sprintf(page + len, "pending_reads=%d\n", atomic_read(&xusb->pending_reads)); len += sprintf(page + len, "max_tx_delay=%d\n", xusb->max_tx_delay); xusb->max_tx_delay = 0; #ifdef DEBUG_PCM_TIMING len += sprintf(page + len, "\nstamp_last_pcm_read=%lld accumulate_diff=%lld\n", stamp_last_pcm_read, accumulate_diff); #endif memcpy(usb_tx_delay, xusb->usb_tx_delay, sizeof(usb_tx_delay)); len += sprintf(page + len, "usb_tx_delay[%d,%d,%d]: ", USEC_BUCKET, BUCKET_START, NUM_BUCKETS); for (i = BUCKET_START; i < NUM_BUCKETS; i++) { len += sprintf(page + len, "%6d ", usb_tx_delay[i]); if (i == mark_limit) len += sprintf(page + len, "| "); } len += sprintf(page + len, "\nPCM_TX_DROPS: %5d (sluggish: %d)\n", atomic_read(&xusb->pcm_tx_drops), atomic_read(&xusb->usb_sluggish_count) ); len += sprintf(page + len, "\nCOUNTERS:\n"); for (i = 0; i < XUSB_COUNTER_MAX; i++) { len += sprintf(page + len, "\t%-15s = %d\n", xusb_counters[i].name, xusb->counters[i]); } #if 0 len += sprintf(page + len, "<-- len=%d\n", len); #endif spin_unlock_irqrestore(&xusb_lock, flags); out: if (len <= off+count) *eof = 1; *start = page + off; len -= off; if (len > count) len = count; if (len < 0) len = 0; return len; } #endif MODULE_DESCRIPTION("XPP USB Transport Driver"); MODULE_AUTHOR("Oron Peled "); MODULE_LICENSE("GPL"); MODULE_VERSION(XPP_VERSION); module_init(xpp_usb_init); module_exit(xpp_usb_shutdown);