The driver iterates through all the spans on a given device during assignment,
checking for unassigned spans, but it was erroneously testing the span on which
assigned was called.
This just removes some unexpected behavior and provides a slight performance
increase on load and does not impact the functionality of the driver as far as
I'm aware.
Reported-by: Doug Bailey <dbailey@digium.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Eliminates the following warning from sparse:
drivers/dahdi/dahdi-sysfs-chan.c:50:29: error: dubious one-bit signed bitfield
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
struct dahdi_count is not directly exposed to user space, so we can use the
native u32 type instead of __u32 to clarify that.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
This allows timingslips to be reset along with the other counters and clarifies
the intended use.
This came up when Doug Bailey asked why he couldn't use dahdi_maint to clear
timing slips in addition to the other counters.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
* Kernel (and SysFS) objects for channels.
* A bus of their own.
* Dynamically allocate a minor (no conflict with /dev/dahdi/timer et. al.).
* Device files located under /dev/dahdi/channels instead of
/dev/dahdi/spans [e.g: /dev/dahdi/channels/2/4)
- A link back should is doable with a simple udev rule.
* Bus name is dahdi_channels instead of dahdi_chans
[e.g: /sys/bus/dahdi_channels]
* Driver name is dahdi instead of dahdi_chans
[e.g: /sys/bus/dahdi_channels/drivers/dahdi]
* Attributes are all strings (or lists of strings), including 'sig' and
'sigcap'.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABCAAGBQJQyL3jAAoJEMZ1bgEN3R/0YHEH/RFKSftR0GWNo8TkRbDnojjK
bU9YwnLucAKe2AgwRKcKLStmEHYK/e2Jar1TVuDBlgvE3hdYRzddjbB045Ff4un2
0483Yx3JMQFYQep3W5DNpT1R7YU9rn9iurObZXnXryWe0Zxw57sKC7ixCl3tEv0m
x58cl9UDMhknf+LtY8b/QNMneIu0MbzBgxiow6yj4g8x9Vv1obnPFbfui871Yvlt
2H4LdVchZCfmYYTcT93AxfV6G/1RuF9wWGbSUN+VigcXuvhUWERsjSVlq0c8GAWO
pocXlxxwN1W8gYC/yhNKKLZHVTBi8YLvNAjUCCr/N7JxX9YnMljCcBjuiljDVlg=
=sZHz
-----END PGP SIGNATURE-----
Merge tag 'review-sysfs-chan' of http://git.tzafrir.org.il/git/dahdi-linux into for-trunk
SysFS Channel representation changes
* Kernel (and SysFS) objects for channels.
* A bus of their own.
* Dynamically allocate a minor (no conflict with /dev/dahdi/timer et. al.).
* Device files located under /dev/dahdi/channels instead of
/dev/dahdi/spans [e.g: /dev/dahdi/channels/2/4)
- A link back should is doable with a simple udev rule.
* Bus name is dahdi_channels instead of dahdi_chans
[e.g: /sys/bus/dahdi_channels]
* Driver name is dahdi instead of dahdi_chans
[e.g: /sys/bus/dahdi_channels/drivers/dahdi]
* Attributes are all strings (or lists of strings), including 'sig' and
'sigcap'.
* Channels have their own dynamically allocated major number
* No arbitrary limit of minor < 250 (no collision with /dev/timer, etc)
* We still have arbitrary limit of channo < DAHDI_MAX_CHANNELS
(should be raised?)
* FIXME: need to check to FIXME's
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
* Added minimal infrastructure:
- A 'chan_device' member to struct dahdi_chan
- An empty 'device_attribute' array
- A 'bus_type' with its methods
- A 'device_driver' with its methods
- Initialization/Cleanup code
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
This resolves an issue with a Glenayre GL3000 Paging Terminal with v8.000
software. The Glenayre would change both A and B bits to signal on/off hook
states, but there were a couple of milliseconds between when those bits changed.
This resulted in DAHDI generating an on-hook event to Asterisk before generating
the off-hook event and therefore Asterisk terminated the call prematurely.
Looking the A and B bits before this patch:
Asterisk (AB) Glenayre (AB)
00 00 Both sides on-hook
11 00 Asterisk goes off hook to sieze line.
11 01 Glenayre starts going-offhook. On-hook event
sent to Asterisk from drivers since bits
changed but ABIT was still 0.
11 11 Glenayre finishes going off-hook. Off-hook
event sent to Asterisk since ABIT changed
from 0 to 1.
00 11 Asterisk, processes on-hook event and goes
on-hook itself to release line.
00 00 Glenayre releases line. Call fails.
After this patch:
Asterisk (AB) Glenayre (AB)
00 00 Both sides on-hook
11 00 Asterisk initiates call
11 01 Glenayre starts handling call. No event is
sent to Asterisk since only ABIT is checked.
11 11 Glanayre finishes going off-hook. Call
proceeds normally.
Internal-Issue-ID: DAHDI-1009
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
dahdi_dynamic now always calls the flush function in softirq context so packet
flushing no longer needs to be pushed off to process context since interrupts
are enabled.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Allows 'git status' command to better show untracked files which one may be
interested in.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Don't run the pre- and post-unregister hooks on a non-phone XPD
(practically: the echo canceller). This fixes a panic with manual
'dahdi_registertion off' as it is now called for the whole device
(regression of 2.6.x).
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10735 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since r10290 "wct4xxp: Add support for TE820 and VPMOCT256." [1],
the TONEDETECT ioctl was not calculating the VPM channel correctly
on non TE820 cards. This fixes a regression first introduced in
2.6.0.
[1] http://svnview.digium.com/svn/dahdi?view=revision&revision=10290
Internal-Issue-ID: DAHLIN-302
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10733 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since r5021 [1], first released in DAHDI-Linux 2.2.0, it's been impossible for
user space to change the rxbufpolicy. This hasn't caused any problems and it's
safe to remove a few more of the vestiges of the rxbufpolicy from the driver.
This streamlines the code path in a few places and saves 8 bytes from the size
of struct dahdi_chan.
The user visible parts are maintained and will indicate
DAHDI_POLICY_IMMEDIATE, like it has since 2.2.0.
[1] http://svnview.digium.com/svn/dahdi?view=revision&revision=5021
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10730 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since r10683 "convert span->spantype to enumerated type" [1] the spantype was
changed from a string provided by the board drivers to an enumerated type that
is handled by the core of DAHDI. This was done to simplify the task of
dahdi_genconf since there is only one place to look for the valid strings that
can be exported in sysfs.
This eliminates the following warning on driver load:
Warning: Span %s didn't specify a spantype. Please fix driver!
[1] http://svnview.digium.com/svn/dahdi?view=revision&revision=10683
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10729 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Not configuring all the spans on an octal card can result in some of the
spans not working in clear channel modes.
Now ensure that all spans receive a default configuration regardless how
they are configured from user space.
Internal-Issue-ID: DAHLIN-289
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10728 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Internally in DAHDI there is always a hardware echocan factory registered and
available. Having this factory always registered allows for DAHDI to work in a
backward compatible fashion. Namely, by default DAHDI will always use a hardware
echocan if one is available unless 'hwec_overrides_swec' dahdi module parameter
is set to 0 on load. However, if there were no real hardware echocans available
in the system dahdi would still report "Echo Canceller(s): HWEC" in the
dahdi_cfg -v output since the hwec factory is always there.
After this change dahdi_cfg will no longer report HWEC as one of the available
echocans if there isn't a physical span present that actually has a hardware
echocan.
Internal-Issue-ID: DAHLIN-300
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10727 a0bf4364-ded3-4de4-8d8a-66a801d63aff
When DAHDI is bridging channels between two different cards, or a user is trying
to record from a channel on a card that is not using the same timing source as
the master span, it is possible to miss audio.
For example, given the following scenario:
<T1 Span> <---> <ISDN CARD> <---> <ANALOG CARD> <---> <local handset>
If DAHDI was set to natively bridge the call from the T1 span to the local
handset it is possible that system conditions could result in one of the cards
servicing their interrupt three times before the other card has a chance to.
Since there are currently only two conference buffers to pass audio between the
cards, one chunk (1ms) of audio will be dropped since the card servicing it's
interrupt more frequently will run out of space to copy audio for the other card
and will have emptied the audio buffer from the other card.
Increasing the number of conference buffers to eight greatly reduces the
probability of audio from being dropped under these conditions at cost of an
additional 72 (32-bit) or 96 (64-bit) bytes per DAHDI channel.
Internal-Issue-ID: DAHLIN-159, DAHDI-976
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10726 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This fixes a regression introduced in commit r10186 "wctdm24xxp: Use time
interval for debouncing FXO ring detect." [1] which was first released in
DAHDI-Linux 2.6.0. This only affects users with analog trunks whose providers do
not present 4 polarity reversals on the ring signals. The reporter of this issue
is based in South Africa.
[1] http://svnview.digium.com/svn/dahdi?view=revision&revision=10168
In prior versions, the ring detector did not check for polarity reversals, only
the presence of ringing voltage unless fwringdetect or neonmwi_monitor mode was
set, and even when one of those modes were set, the driver only needed two
reversals to validate a ring. This commit allows the driver to always stay in
fwringdetect mode but restores the requirement for only two reversals.
Also included in this commit is a change to ensure that ringing is not reported
when debouncing lost battery which can happen when voltage is swinging through
0.
Reported-and-Tested-by: Jaco Kroon <jaco@uls.co.za>
Internal-Issue-ID: DAHLIN-298
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10719 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The previous maint state was saved regardless if the base driver returned an
error or not. This caused strange behavior in dahdi tools. Moved the maint
state save to after the switch case to reflect this.
https://issues.asterisk.org/jira/browse/DAHDI-984
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10718 a0bf4364-ded3-4de4-8d8a-66a801d63aff
When compiling against kernels 2.6.25, you could get the following error.
error: linux/pci-aspm.h: No such file or directory
This fixes a build regression introduced in r10556 "dahdi: Add
dahdi_pci_disable_link_state for kernel < 2.6.25." [1]
[1] http://svnview.digium.com/svn/dahdi?view=revision&revision=10556
Reported-by: Jean-Philippe Lord
Internal-Issue-ID: DAHLIN-299
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10705 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This fixes an (embarrassing) error in t1_check_sigbits in the previous commit
where I was writing pass the end of an array on the stack.
Now instead of using an array on the stack, of which all elements were not used,
the pending commands are now stored on a list. I also removed the automatic free
of commands from __t1_getresults and now the function that allocated the command
now frees them.
I believe this will be less error-prone going forward.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10700 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The frequency that the RBS registers were polled was too slow to catch the pulse
dialing digits. The result was that often times dahdi would generate WINK events
instead of PULSEDIGIT events.
This speeds up the rate at which the registers are checked from 100ms to 33ms
and also makes the process of checking the registers quicker by queing up all
the reads at once.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10699 a0bf4364-ded3-4de4-8d8a-66a801d63aff
To enable J1 mode previously one would configure the card in T1 mode and then
set the j1mode module parameter. Now "modprobe wcte12xp default_linemode=j1"
will work like the other linemodes globally for all cards manged by this driver.
J1 can also be set on a card-by-card basis in sysfs.
Also move pr_fmt to top of file so pr_xxx macros print the module name as
intended.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10696 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* UMH_WAIT_PROC semantics (and value) was changed from enum to
a bitmask (via #define)
* This constant was missing from kernels older than 2.6.23
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10692 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* This is a minimal convertion -- everything compiles and looks OK.
* We print a warning for spans registering without a spantype.
* Low-level drivers may later want (but not required)
to fold their internal representations to this canonical
representation -- it will save code and make it more readable.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10683 a0bf4364-ded3-4de4-8d8a-66a801d63aff
I failed to compile test r10661 and introduced a typo when fixing a
checkpatch.pl warning.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10662 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This is a port of the functionality in the wctdm24xxp driver to support power
savings modes. Specifically, if the the network side of a BRI spans deactivates
the span to save power, the B410P previously automatically activated it again.
Now, if persistentlayer1=0 module parameter is set, the span will be allowed to
stay deactivated until layer two has a message to send on the dchannel.
This patch does not change any of the default behavior of the B410P driver and
the defaults for the persistentlayer1 option is inconsistent with that of the
B400M modules in the wctdm24xxp driver.
Internal-Issue-ID: ABE-2845
From: Matthew Fredrickson <creslin@digium.com>
[ Minor formatting, exposed the persistentlayer1 as module parameter, changed
defaults for teignorered, alarmdebounce, and persistentlayer1 to match current
defaults in wcb4xxp driver ]
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10661 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Previous commit (r10649) included an incorrect version. Including full message
from that commit for the description.
rev. 10502 of the FPGA firmware for the new E-Main rev. 4 fixes a potential
issue when used on Xorcom XR1000 systems: an issue with the power supply may
cause the unit to reset.
Note that there is no issue with previous models, with a normal setup of an
Astribank, or other XRx000 systems.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10652 a0bf4364-ded3-4de4-8d8a-66a801d63aff
rev. 10502 of the FPGA firmware for the new E-Main rev. 4 fixes a potential
issue when used on Xorcom XR1000 systems: an issue with the power supply may
cause the unit to reset.
Note that there is no issue with previous models, with a normal setup of an
Astribank, or other XRx000 systems.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10649 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Print a warning message that it may be a GPL violation to redistribute these
binaries if the firmware for the VPMOCT032/64/128/256 is compiled in.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10646 a0bf4364-ded3-4de4-8d8a-66a801d63aff
It appears that some kernel configurations do not include timer.h in any of
the include files that are included by dahdi_dummy. The timer_structs are
defined in timer.h and not time.h, so this change is correct even though I
never could find a configuation myself that actually failed to compile.
This has negligible impact since dahdi_dummy is not compiled by default.
Internal-Issue-ID: DAHLIN-185
Reported-by: Steve Murphy
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10640 a0bf4364-ded3-4de4-8d8a-66a801d63aff
