This moves the version string into dahdi-version.c that is then linked into
dahdi-base.c and dahdi-sysfs.c. This speeds builds on slow computers since
dahdi-base.c and dahdi-sysfs.c does not need to be rebuilt if only the version
string is changing.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Oron Peled <oron.peled@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9777 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Switch to using the newer seq_file interface for procfs. Fixes a
race when you read the "file" while its size increases (e.g. the span
enters an alarm state).
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
(closes issue #18760)
Patches:
0001-DAHDI-linux-trunk-replace-old-proc-interface-by-mode.patch uploaded by tzafrir (license 46)
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9770 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Fixes a regression introduced in r9611. Analog spans would never become
the master since the SPANSTART ioctl is not typically called on them,
and therefore they were never marked RUNNING. The result could be audio
problems.
I'm marking this as related to issue 13205 since it's generally all
related to how should the drivers select which span is the master. I
also mark as related to issue 16165 because the problems experienced are
a result of the same fundamental issue.
(issue #13205)(issue #16165)
Reported-and-Tested-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9729 a0bf4364-ded3-4de4-8d8a-66a801d63aff
With the release of Linux 2.6.37, the Big Kernel Lock is now a compile
time option. This change adds a mutex around the one place in the code
that we already knew was dependent on the lock_kernel/unlock_kernel
calls for serialization and drops the other calls to
lock_kernel/unlock_kernel if CONFIG_BKL is not defined.
This is *mostly* the dahdi-no-bkl.patch with a few minor whitespace
changes, the global_dialparmslock made static, and a warning added to
let people know they are running an experimental configuration.
(issue #18604)
Reported by: jkroon
Patches:
dahdi-no-bkl.patch uploaded by jkroon (license 714)
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9721 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Just clarifying a parameter that is never updated.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9644 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Move the description of the master span processing to above the
process_masterspan function.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9643 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This fixes a regression introduced in r9603. That commit removed
DAHDI_CONF_DIGITALMON handling (which is used to natively bridge two
channels that cannot be crossed in the board driver / hardware) since I
mistakenly thought that it was only part of the DACS handling. The
symptom of the regression is muted audio when Asterisk tries to natively
bridge two channels.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9642 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Move pseudo channel numbers up into a high range so that their presence
does not interfere with assigning channel numbers for the channels
implemented on spans. Otherwise, if a pseudo channel was opened up
before an expected span was registered, all the channel numbers in the
newly registered span would be bumped up one. This does limit the number
of real channels that a single system may have registered to 32K (but in
dahdi-linux 2.4.0 and below you were limited to 1024 channels anyway,
both real and pseudo).
Also, the string name of the Pseudo channel is now based off the
number of Pseudo channels and not the total number of channels.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9637 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* Refactor SysFS and device-related code to drivers/dahdi/dahdi-sysfs.c .
* Move common headers to drivers/dahdi/dahdi.h .
This commit merely moves existing code and should have no functional
change.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Oron Peled <oron.peled@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9628 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* Separate out device generation in dahdi_[un]register to separate
functions.
* As we don't keep anywhere the information of whether or not
* there's
an existing device node for a channel, I abuse an unused flag:
DAHDI_FLAGBIT_DEVFILE (25), to mark if the channel has a sysfs node.
DAHDI_FLAGBIT_DEVFILE is expected to be replaced later on with a proper
pointer to the device (or embedding of the device). I prefer a simple
flag for now as it does not break ABI.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9625 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Separate out device initialization and removal functions:
dahdi_sysfs_init() and dahdi_sysfs_exit(). A safer way of
generating the main device files.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9623 a0bf4364-ded3-4de4-8d8a-66a801d63aff
dahdi_check_conf() acqurires the locks as needed when scanning the
channels and should not be called under any spinlocks.
Fixes a regression that Tzafrir reported in #asterisk-dev that he could
trigger via "asterisk -rx 'channel originate Local/600@demo
Application Meetme 3000,d'"
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9621 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This fixes a regression from r9609 that Tzafrir reported. If you
register multiple spans, then remove the first span and try to register
a new span with more channels then the old span, you could end up with
multiple channels with the same number.
This change ensures that spans are ordered and that channels on a span
are always contiguous and ordered in relation to the spans.
In previous released versions of DAHDI (2.4.0 and below) this condition
would result in spans that may not have contiguous blocks of channels.
So it fixes both a recent regression and improves the behavior.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9617 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The default tone lengths are compile time options and they were in
digits.h to make it easy for users to patch. Most of these settings are
potentially overridden from user space via the DAHDI_SET_DIALPARAMS
ioctl currently regardless of these settings.
In r9597 I moved digits.h directly into dahdi-base.c since I thought it
was broken out for sharing between compilation units as opposed to
ease patching.
I also changed the units of the default options to ms instead of in
samples. This way if the sampling frequency changes the user will not
need to update the defaults.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
asterisk-dev-reference: 4D236FD7.30707@digium.com
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9616 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This is a cleanup as part of simplifying reference counting for the
spans.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9612 a0bf4364-ded3-4de4-8d8a-66a801d63aff
When a span goes into alarm it will look for a potential new master
span. For dynamic spans that are running their processing in the
sync_tick callback, the chan_lock will already be held. Therefore,
push the locating of a new master out to the global workqueue.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9611 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since there isn't a fixed array to hold all the channels, and also limit
the total number of channels that can be created, we'll add a module
parameter to allow the system administrator to specify the maximum
number of pseudo channels. This is to prevent a potentially
non-privledged process from consuming too much CPU (since all pseudos
are checked each "tick" for conferencing) and kernel memory.
By default the number of pseudo channels is limited to 512. Change the
default limit with:
]# modprobe dahdi max_pseudo_channels=<new limit>
or at runtime with:
]# echo <new limit> > /sys/module/dahdi/parameters/max_psuedo_channels
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9610 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Remove the remaining locations the 'chans' array was referenced but keep
the observable behavior the same. Namely, channels are numbered in
registration order. Only now it's possible to renumber channels easily
since their number is not also their implied location in the 'chans'
array.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9609 a0bf4364-ded3-4de4-8d8a-66a801d63aff
In dahdi_chec_conf, dahdi_chan_unreg, and dahdi_ioctl_confdiag maxchans
and DAHDI_MAX_CHANNELS was used to scan through all the channels. Since
the channels are stored on the list of spans and list of pseudo
channels, we can directly iterate through those lists. This also paves
the way for removing the arbitrary limit on the number of channels in
the driver.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9608 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Part of getting rid of global chans array. We need to search the list
of spans and the list of pseudo channels. While this is slower than a
direct index into a 'chans' array, the places where this function is
called are not in the 'hot' path but instead part of channel
configuration and conferencing setup.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9607 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Streamlines the function a bit by grouping the three conditions that
would cause the channel receive to be completely skipped.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9606 a0bf4364-ded3-4de4-8d8a-66a801d63aff
IMO this improves readability of dahdi_receive and dahdi_transmit, and
the compiler can decide if it is better to inline this in with the
caller or break it out into a separate function.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9605 a0bf4364-ded3-4de4-8d8a-66a801d63aff
When we're in monitor mode, we can save a pointer to the channel we are
monitoring directly instead of dereferencing the 'chans' array each
time.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9604 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This both removes the need to reference the 'chans'
__dahdi_process_putaudio_chunk and __dahdi_process_getaudio_chunk, and
allows the dahdi_receive / dahdi_transmit logic to be streamlined. DACS
channels can no longer be echocanceled if crossed. However, if a
channel was DACSed with dahi_cfg it couldn't have been echocanceled
anyway since the echo cancelers are disabled on the channel by default.
This change was originally contained in a patch kpfleming had floating
around. I split it up and merged it.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Kevin P. Fleming <kpfleming@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9603 a0bf4364-ded3-4de4-8d8a-66a801d63aff
There is no need to check the flag on the master channel when processing all
the slave channels. Originally part of a patch kpfleming had floating around.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Kevin P. Fleming <kpfleming@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9602 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Eliminates the need to look for the channel number twice.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9599 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Spans are no longer added to a static array, but they are chained
together in a list. DAHDI_MAX_SPANS, while no longer used in the
kernel, is still in include/dahdi/user.h since dahdi tools is currently
using it.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9598 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Clarify that these definitions are not / no longer used outside
dahdi-base.c.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9597 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Mainly I wanted to document that the global_dialparams is protected by
the BKL so that it can be closely checked when lock_kernel is removed
from DAHDI.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9596 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This change primarily is a memory reduction. Most users only ever have
a single tone zone loaded so we can save some mostly unused pointers by
using a list instead of an array. Since we also have a pointer to the
dahdi_zone in struct dahdi_chan, we also don't need to store the integer
that is an index into that array. This saves 4 bytes for every channel
allocated in the system. Finally, we don't need a separate default_zone
member since we're on a list, we can define the first element on
the list to always be the default zone.
Additionally, all reference counted structures in the drivers should
standardize on kref as much as possible for simplicity.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9594 a0bf4364-ded3-4de4-8d8a-66a801d63aff
kasprintf will be used in upcoming changes and it's not supported on
RHEL4 kernels. This change essentially backports it.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9593 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Might help when someone wonders why they are now getting errors about
"lock_kernel" being undefined.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9592 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Not only should you not reach that line, it's impossible for you to
reach that line.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9591 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Do not allocate the structure with GFP_KERNEL under the lock in
dahdi_echocan_factory_register and closes a leak in
dahdi_echocan_factory_unregister.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9590 a0bf4364-ded3-4de4-8d8a-66a801d63aff
rwlocks are slowly being deprecated because they typically do not
provide the performance increase expected. Most of the
ecfactory_list_lock acquiring is during setup and not in the hot path
anyway, so we can just use the simpler spinlock semantics without the
overhead of a semaphore or mutex.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9589 a0bf4364-ded3-4de4-8d8a-66a801d63aff
rwlocks are deprecated and there aren't that many places where read_lock
was called on the lock anyway.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9588 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This is a trivial cleanup to primarily to remove the #ifdef test out of
process_masterspan.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9586 a0bf4364-ded3-4de4-8d8a-66a801d63aff
There is already a safe string copying function in all the kernels DAHDI
currently supports.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9585 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Normally, spans are accessed via channels, which increment the reference
count on the supporting module as part of the open call. When operating
on spans by number we are susceptible to a module_unload while we are
accessing the span.
Renames find_span to span_find_and_get to indicate that we're both
finding the span by number and increasing the reference count on the
span. Spans themselves don't currently have reference counts, but we
can increment the reference count on the module that owns the spans.
This will prevent the module that has the span from unloading in the
middle of a span_config call, which in the case of the wcte12xp can take
awhile since the VPM firmware is loading.
Hopefully in the near future the spans themselves will be reference
counted directly.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9583 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Some spans, specifically dynamic local spans, should never be the timing
master since they are dependent on some other timing source driving
them.
The bit in 'struct dahdi_span' is named cannot provide timing so that by
default the other drivers will set it to 0.
This is loosely related to issue #13205 but doesn't address any of the
other elements of that issue about how to allow the user to configure
what the master span order of succession is.
(issue #13205)
Reported by: biohumanoid
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9581 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Dynamic spans that are unable to provide their own timing, like dahdi
local spans, typically derived their timing source from
dahdi_dynamic_ioctl(0,0) call in process_masterspan.
This change uses the sync_tick member of dahdi_span_ops instead so that
dynamic operations do not happen on a span until it is fully registered.
Also removes the check for dahdi_dynamic_ioctl in process masterspan for
those users that never load a dynamic span.
This was originally suggested in a comment on:
(issue #13205)
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9576 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This is instead of initializing the waitq each time the channel is
opened or closed.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Russ Meyerreicks <rmeyerreicks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9549 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since we've now switched to wait_event_interruptible calls, we have a
condition that we can check when we're awoken. This allows us to
combine the separate wait queues into a single queue.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Russ Meyerreicks <rmeyerreicks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9548 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Makes it a little more clear what it is we're really waiting for.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Russ Meyerreicks <rmeyerreicks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9547 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Fixes a regression introduced in r9510 which saves a pointer to the ops
member of a channel's span before checking if the channel is a pseudo.
Psuedo channels do not have spans.
(issue #18463)
(issue #18422)
Reported by: alecdavis
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9530 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Changed the echocan factory name to a function (get_name) called to get the
name. This allows a factory to return a different name when being called in
reference to a channel such as in the case of hardware echo cancellers. To
further accommodate this change for HWEC, a new echocan_name function was
added to the span ops struct and is used in hwec_factory in dahdi-base for
all cards that support hardware echo cancellation.
Signed-off-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9524 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This field was redundant and was only used in places where the factory's name could be used.
Signed-off-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9523 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Remove the code that allowed hardware echo cancellation to automatically
override software cancellation and prevented SWEC from working at all on a
card if HWEC was installed. All EC now uses the standard modular EC interface.
Additionally, the "SWEC" identifier on channel lines in /proc/dahdi has been
changed to "ECTYPE" to avoid confusion.
Signed-off-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9521 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This change adds an echocan factory to dahdi-base that will allow hardware
echo cancellation to use the same interface as the current software echo
cancellers. The additions in this commit will not have any effect until the
current HWEC mechanism is removed.
Signed-off-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9520 a0bf4364-ded3-4de4-8d8a-66a801d63aff
DAHDI_MAINT_LOOPSTOP is being removed due to the redundancy with
DAHDI_MAINT_NONE. Also removing some timing logic, as amount of time a
loopup or loopdown signal is held on the line, is now defined in
userspace with dahdi_maint.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9515 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The dahdi_span->maintq wait queue was very old and not being used so it
has been removed.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom..com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9514 a0bf4364-ded3-4de4-8d8a-66a801d63aff
If chan->span->ops->open() fails then the reference count of the module
implementing the board driver will not be decremented. The result is a
module that would always be "in use" and unloadable.
This change makes sure to release that reference when open failed.
(closes issue #18422)
Reported by: avarvit
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Angelos Varvitsiotis <avarvit@admin.grnet.gr>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9510 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The primary change is to make clear that the wait result is not ever to
be returned by the function. There are also edits to remove some
comments that were expressed clearly in the source already and ensure
that the iomux member of 'struct dahdi_chan' is only accessed under the
chan->lock.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Sean Bright <sean.bright@gmail.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9497 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This fixes a regression introduced in revision r9466. Before this patch
one might see "I/O MUX failed: Success" messages on the Asterisk console
since the return from ioctl was > 0.
Signed-off-by: Sean Bright <sean.bright@gmail.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9496 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Reworking tsearle's patch to fit with coding guidelines and make
process_masterspan a bit easier to read.
(closes issue #16831)
Reported by: tsearle
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9494 a0bf4364-ded3-4de4-8d8a-66a801d63aff
It can now be enabled by un-commenting the CONFIG_DAHDI_MIRROR define in
include/dahdi/dahdi_config.h
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9492 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Adding the patch from the issue with various fixups to fit style and
checkpatch
(issue #16831)
Reported by: tsearle
Patches:
driver_v2.patch uploaded by tsearle (license 373)
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9491 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The first place new_master is referenced after the definition is to
assign it to the value of the current master.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9489 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Logs the RBS bits to dmesg, for troubleshooting, for all drivers that call
dahdi_rbsbits(). Added the DEBUG_RBS bit in the debug module parameter
bitfield.
(issue #18025)
Acked-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9487 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Also moves the dahdi_txlevelnames array into the dahdi_lboname function,
which is the only place it it used.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9468 a0bf4364-ded3-4de4-8d8a-66a801d63aff
wake_up_interruptible() will change the state of waiting tasks back to
TASK_RUNNING, therefore, we want to ensure we set TASK_INTERRUPTIBLE
before checking the conditions that we're going to sleep on.
In practice, this closes a small window were the caller may be put to
sleep when the condition is true, and have to wait for another event to
come in order to wake from the sleep.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9467 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Just a cleanup patch that moves code into a standalone function. Real
change to follow.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9466 a0bf4364-ded3-4de4-8d8a-66a801d63aff
'interruptible_sleep_on()' is the Linux equivalent of 'tsleep()'. When
we're sleeping for a condition, we can also just use
wait_event_interruptible to close a potential race where the condition
goes true between the time we checked it and when we go to sleep waiting
on the event.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9465 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Conference links do not appear to be in use anymore and they are now
removed. I could not find any references to this ioctl in the asterisk
repository, or zaptel user space tools.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9463 a0bf4364-ded3-4de4-8d8a-66a801d63aff
When using conference mode DAHDI_CONF_DIGITALMON ensure conf_chan is
set. Otherwise we dereference a NULL 'conf_chan'.
Fixes regression introduced in revision 9381
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9457 a0bf4364-ded3-4de4-8d8a-66a801d63aff
DAHDI does not support any kernels older than 2.6.9. No need
to keep the old HDLC interface support around.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9447 a0bf4364-ded3-4de4-8d8a-66a801d63aff
'zt' is a carry over from the Zaptel days.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9445 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Push all tests for the DAHDI_FLAGBIT_NETDEV flag behind a
'dahdi_have_netdev' function so if CONFIG_DAHDI_NET is not defined the
compiler can just remove all the flag tests. Also, makes sure that the
bit is checked / set atomically.
(closes issue #9379)
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9444 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Add optional interface to allow software echo cans to process the
transmitted samples. Can be used for things like DC removal.
I used the following patches uploaded by biohumanoid but changed the
name of 'echocan_hpf_tx' to 'echoan_process_tx and put the changes
behind a compile time option.
(issue #13562)
Reported by: biohumanoid
Patches:
kernel.h.patch uploaded by biohumanoid (license 459)
dahdi-base.c.#2.patch uploaded by biohumanoid (license 459)
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9442 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Fixes a typo recently introduced that was preventing asterisk from
setting the swgains on a channel.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9423 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Make explicit what part of the union is being accessed.
(closes issue #15908)
Reported by: ys
Patches:
dahdi-dahdi_echocan_events.diff uploaded by ys (license 281)
Signed-off-by: Kinsey Moore <kmoore@digium.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9421 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The bigzaplock was used to prevent changes to all the channels during
masterspan processing while conference parameters were changing. The
master span processing also took a global lock out on the chan_lock to
prevent new channels from being registered or unregistered during
processing. Instead of grabbing both those locks, just changing the
semantics of chan_lock to those of bigzaplock seems to fit the bill and
removes another lock from the driver (and saves ~10 ns on a 2.40 GHz
Xeon in prcocess_masterspan)
chan_lock is a candidate for conversion to RCU but usage in conferencing
(bigzaplock type usage) needs to be audited carefully before conversion.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Review: https://reviewboard.asterisk.org/r/940/
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9414 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Very slight performance increase when timertest is running in the
background. Measured at ~10 ns improvement over 10K samples.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Review: https://reviewboard.asterisk.org/r/940/
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9413 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The check for DEFINE_SPINLOCK was spread throughout the source tree. If
not defined we can just define it in inlucde/dahdi/kernel.h. Now
include/dahdi/kernel.h is the only place that references
SPIN_LOCK_UNLOCKED (which breaks lockdep checking if DEFINE_SPINLOCK is
otherwise defined in the kernel).
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Review: https://reviewboard.asterisk.org/r/940/
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9411 a0bf4364-ded3-4de4-8d8a-66a801d63aff
When no hardware spans are configured DAHDI will use a kernel timer in order
provide timing for conferences. This is what dahdi_dummy historically was used
for. When kernel timers are used to provide timing DAHDI can both potentially
slow the rate at which time timer runs and also needs to account for how many
milliseconds of audio are processed for each 'tick' of process_masterspan.
The result is that if you are only using DAHDI for app_meetme, you can change
DAHDI_CHUNKSIZE to 40 (5ms) or 80 (10ms) bytes to reduce overhead since user
space is dealing with chunks of 20ms by default anyway.
NOTE: If you set this, you may still need to comment out the board drivers in
drivers/dahdi/Kbuild since they all do not support operating with a
DAHDI_CHUNKSIZE != 8 currently.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Review: https://reviewboard.asterisk.org/r/940/
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9407 a0bf4364-ded3-4de4-8d8a-66a801d63aff
dahdi_receive, dahdi_transmit, and dahdi_ec_span are mostly called from
interrupt context anyway, so we can save a few cycles by not saving and
restoring the interrupt flags for every channel.
On one 2.40GHz Xeon test machine, for a span with 24 channels w/o echocan
enabled with ~10000 samples:
Function Avg Before Avg After
======================================
dahdi_receive 2.109 us 1.547 us
dahdi_transmit 3.203 us 2.766 us
dahdi_ec_span 0.416 us 0.454 us
NOTE: The time went up slightly on dahdi_ec_span since I did not have
software echocan enabled and this change calls local_irq_save regardless
in dahdi_ec_span. The slight increase in processing time in this case
is overshadowed by the savings in dahdi_receive and dahdi_transmit. If
echocan was enabled on all the channels there would be a time savings
in that dahdi_ec_span too.
When dahdi_receive/dahdi_transmit are called every millisecond (when
DAHDI_CHUNKSIZE == 8) this saves ~0.1% CPU time for each span.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Review: https://reviewboard.asterisk.org/r/940/
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9406 a0bf4364-ded3-4de4-8d8a-66a801d63aff
If we know that an open file is associated with a channel (pseudo or
real) we can just update the file->f_ops pointer so that we can short
circuit some of the checks in read/write/poll. Trades sizeof(file_operations)
bytes for less function call overhead in the "hot" path.
On a 2.4 GHz Xeon, saves around 150 ns on each read / write.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9386 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since we have the pseudo channels on their own list, we don't need to
step through the chans array when we just want to find the pseudo
channels. Likewise, all the real channels will have be on a span. Also
removes references to the global chans array in process_masterspan.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9384 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since pseudo channels are without spans and we would like to use the
span list to enumerate through all the channels, keeping the psuedo
channels on their own list is required. I believe this is a more
natural choice than making a dummy spans for pseudos since pseudo
channels should *really* just be an implementation detail that the user
shouldn't care about.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9383 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This change also involves setting the DAHDI_FLAGBIT_CLOSE bit on the
channel before calling the 'close' callback in span ops. It appears
that only the dynamic spans may delete the channels on close, but that
code path doesn't check the DAHDI_FLAGBIT_CLOSE bit anyway.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9373 a0bf4364-ded3-4de4-8d8a-66a801d63aff
If someone was still using this...feel free to add it back in with a
comment about why it needs to be in the mainline. It looked better to
remove it than edit it to make sure it worked.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9370 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This ioctl is called either via the "/dev/dahdi/channel" file or via a
/dev/dahdi/channo file. In either case, either the minor number of the
device file will match up with a channel, or the "private_data" member
on the channel will be set, so the unit is redundant.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9369 a0bf4364-ded3-4de4-8d8a-66a801d63aff
I believe this makes it a little more clear what is happening. Also could
provide a potential speedup if the span doesn't need to be constantly
dereferenced (although an optimizer might make this moot). Regardless, this
change doesn't hurt.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9362 a0bf4364-ded3-4de4-8d8a-66a801d63aff
In __dahdi_process_getaudio_chunk and __dahdi_process_putaudio_chunk we
can streamline the operation slightly by saving a constant pointer to
the conference channel instead of constantly dereferencing the master
channel and indexing into the chan array.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9361 a0bf4364-ded3-4de4-8d8a-66a801d63aff
It is still used at span registration / unregistration to assign the span
number, and when iterating through all spans. Otherwise, moves the code base a
step closer to removal of the 'spans' array.
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9355 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Enable DAHDI to detect if an operation on a file handle refers to a
channel that may have been unregistered. This can occur, for example,
when a board driver is hot-swapped out in a live system.
This patch ensures that file->private_data is always properly set for
any open channel, and it's set back to NULL when a channel is
unregistered. This way file->private_data can be used to check whether
it's valid to perform an operation on the channel. (NOTE: There is
still a race condition here if the driver was unbound on one processor
during the window of time between when file->private_data was checked
and the system call finishes).
Also, since DAHDI should only return -ENODEV on read or write when there
was a surprise device removal on a running system this sleep can prevent
the system from becoming unresponsive if the userspace application does
not check for the -ENODEV error and constantly tries to call read with
elevated privileges.
(issue #17669)
Reported by: tzafrir
Tested by: sruffell
Review: https://reviewboard.asterisk.org/r/905/
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9353 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Most likely some stale debugging code that slipped in and is now gone.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9350 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Makes it a little more clear what the '0' parameter represents.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9324 a0bf4364-ded3-4de4-8d8a-66a801d63aff
These functions were only defined if BUF_MUNGE was defined, but even if
that symbol is defined there is not anyplace in the driver where these
functions were then called. This has been in the code since rev 87 so
this is most likely stale debugging code.
Feel free to revert if this is actually used somewhere that is not
apparent.
Here is where the functions were originally added to the drivers:
http://svnview.digium.com/svn/zaptel?view=revision&revision=87
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9322 a0bf4364-ded3-4de4-8d8a-66a801d63aff
These label parameters were not used in the functions. They are most
likely some debug code that was left over.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9321 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Put the "Master changed to xxx/x/x" message behind a debug flag. It's an
implementation specific detail and has caused confusion with customers.
DAHDI-692
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9299 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Kernel interface for network devices changed. This is the patch from issue
plus a few trivial checkpatch.pl formatting changes (minus the >80 column
warnings).
(closes issue #17857)
Reported by: msink
Patches:
dahdi_net-v2.patch uploaded by msink (license 1103)
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9247 a0bf4364-ded3-4de4-8d8a-66a801d63aff
There are not any existing users of the interface (and it would always
return -ENOSYS to the caller anyway).
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9246 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This needs some more testing before it's on by default. If the card is
otherwise functioning, these messages may be confusing to the user. If
the card is not functioning, the driver can be reloaded with debug to
check for this condition.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9205 a0bf4364-ded3-4de4-8d8a-66a801d63aff
