Part of increasing system startup speed.
Splitting these two operations facilitate checking if there is a module
present synchronously on driver load from the actual load of the firmware and
configuration of the channels.
This will allow the presence of the VPM module to be flagged on the span
before registration, but load and configuration can happen in the background.
When the modules are eventually loaded via udev, there will be enough time
from the time the drivers are loaded to when dahdi_cfg will run to complete
the firmware load, eliminating the need to block the driver here.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9951 a0bf4364-ded3-4de4-8d8a-66a801d63aff
In my opinion naming the VPM workqueues for each board is not worth the
extra complexity.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9950 a0bf4364-ded3-4de4-8d8a-66a801d63aff
It is only ever accessed in interrupt context anyway. Saves several
hundred nanoseconds from hard interrupt context.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Michael Spiceland <mspiceland@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9888 a0bf4364-ded3-4de4-8d8a-66a801d63aff
No need for the CPU to wait there for that write to flush when all the
writes will be flushed when the interrupt is acknoledged later. Saves
nearly a 1 us from the interrupt handler on a 3Ghz Xeon test system.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Michael Spiceland <mspiceland@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9887 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Allows the board drivers to use the regular locks instead of the
irqsave/irqrestore variants.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Michael Spiceland <mspiceland@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9885 a0bf4364-ded3-4de4-8d8a-66a801d63aff
voicebus_quiesce is like voicebus_stop, except that it doesn't wait for any
information to come back from the card. This prevents kexec from blocking
waiting for information from a potentially dead card.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Michael Spiceland <mspiceland@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9880 a0bf4364-ded3-4de4-8d8a-66a801d63aff
r9402 switched to dma_pool for the SFRAMES. This updates the network
debug device to use the dma_pools for SFRAME allocation.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Michael Spiceland <mspiceland@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9877 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since there never was a VPMADT032 module shipped with non-volatile
memory no need to check that bit contantly in interrupt context. Also
remove the unused VPM150M_DTMFDETECT bit.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9781 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This is a cleanup patch to make it a little easier to see what the bits
mean.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-By: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9543 a0bf4364-ded3-4de4-8d8a-66a801d63aff
There are some platforms where the read-line multiple transaction causes
packets to be dropped in the voicebus pipeline. The only observable
behavior is that packets just go "missing" in the pipeline. This also
only appears to affect PCI cards.
A typical 'symptom' of this problem is you may see IRQ misses increasing
without any corresponding "bumps" in latency in the kernel message log.
Normally, IRQ misses are correlated to latency bumps since that is an
indication that the host was not able to service the card interrupt in a
timely fashion. DAHDI-510 DAHDI-774
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9542 a0bf4364-ded3-4de4-8d8a-66a801d63aff
rwlock is slower than normal spinlocks and this lock is rarely contended
for. Also noticed that the vpmadt032_module_init function is now (was
already) redundant since all the elements initialized in it were already
initialized.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-By: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9538 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This reduces the chance that another interrupt will interfere with the
recovery process. Otherwise it is possible that the hardware advances
past the position that we think it is currently at.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-By: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9535 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Reading 0xffffffff from the registers is a different error than just not
coming out of reset. Add a little extra debugging information.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-By: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9534 a0bf4364-ded3-4de4-8d8a-66a801d63aff
There were some routes through the failure paths in __voicebus_init() where a
registered memory region was not subsequently released. This change closes
those paths.
The result would be on subsequent loads of the driver after hitting the
failure condition you would see "IO Registers are in use by another module."
in dmesg.
request_mem_region/release_mem_region should most likely be converted to
devm_request_region and devm_release_region introduced in 2.6.20
(commit 9ac7849e35f705830f7b016ff272b0ff1f7ff759) which was introduced for
reasons just such as this.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9503 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Using semaphores as mutexes was removed from the kernel in 4882720b267b.
Just use straight semaphores now. 'DECLARE_MUTEX()' -> 'DEFINE_SEMAPHORE()'
and 'init_MUTEX()' -> 'sema_init()'.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
LKML-Reference: <20100907125057.562399240@linutronix.de>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9464 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Setting this configuration option would not have had any impact when a
hardware echo canceler was in use.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Kinsey Moore <kmoore@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9432 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The voicebus interface constantly uses the same buffers for moving data
to/from the card. A fixed pool has less overhead in this case than
constantly mapping/unmapping the kmem_cache_alloced buffers.
Saves about ~2.608 us for each run of vb_isr on a 2.40 GHz Xeon test
machine.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9402 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This change was made in revision 8176.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9401 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The voicebus library by default configures the PCI interface to poll the
descriptor ring for available buffers. There are some platforms like
the Intel SG3420P motherboard where this does not appear to be
sufficient. Writing to the transmit demand poll register resolves this
problem on these troublesome platforms. DAHDI-700 DAHDI-702.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9397 a0bf4364-ded3-4de4-8d8a-66a801d63aff
It is possible to softlock if the board stops delivering interrupts in
the middle of a reset.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9332 a0bf4364-ded3-4de4-8d8a-66a801d63aff
I have yet to personally come across a system where this actually
changes the observable behavior, but it certainly seems like the sane
thing to do and I would rather not let this float around as a patch when
I can just merge it in.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9326 a0bf4364-ded3-4de4-8d8a-66a801d63aff
These three bits are already set by 'pci_enable_device' and
'pci_set_master' calls.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9325 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This needs some more testing before it's on by default. If the card is
otherwise functioning, these messages may be confusing to the user. If
the card is not functioning, the driver can be reloaded with debug to
check for this condition.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@9205 a0bf4364-ded3-4de4-8d8a-66a801d63aff
