If the hook state on an FXS port changes before the channel is
configured with dahdi_cfg it is possible to erroneously force the line
feed register open without setting a timer to clear it.
The result would be a "dead" channel that cannot be cleared unless the
driver is reloaded and warning in the kernel log that "0 is an invalid
signaling state for an FXS module".
This change makes the OFF_HOOK to ON_HOOK change behave just as the
ON_HOOK to OFF_HOOK change has.
Internal-Issue-ID: DAHLIN-272
Reported-and-Tested-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10396 a0bf4364-ded3-4de4-8d8a-66a801d63aff
It is not necessary to wait a full second for the donebit.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Russ Meyerriecks <rmeyerriecks@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10395 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* We need to split the BRI D-Channel (HDLC) frames to smaller packets,
limitation of the FPGA.
* This changes batches BRI D-channel packets of the same HDLC frame to a
single XPP frame.
* Avoids an accidental fragmantion in case we were delayed for a few ms-s.
* Also improves efficiency.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10390 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* The zero lenth case (Magic request) was split into
send_magic_request() function. It was not possible
to move it into card_bri.c, because it is called
directly from the general interface we provide for
register read/write via sysfs/proc.
* The normal case (send_multibyte_request) was moved from
card_global.c into card_bri.c
* This sets the stage to enable bundling of multibyte
packets into frames (like we do for PCM).
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10389 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Now that legacy BRISTUFF code is gone, some wrapper
functions became trivial. Removed these wrappers
and inlined their contents.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10388 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This is also a work around the bug fixed in the previous commit.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10384 a0bf4364-ded3-4de4-8d8a-66a801d63aff
module_put() that was added while developing the sysfs code. The real
module_get()/module_put() pair were already removed at the time of
developing code for this branch. It was only triggered when using a
system with more than 32 (MAX_BUSES) Astribanks.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-By: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10383 a0bf4364-ded3-4de4-8d8a-66a801d63aff
I've seen some platforms that do not properly route the interrupt from the
card to the host CPU. In these cases the card potentially could appear to be
greened up even though no data is flowing over the spans.
This change allows dahdi_cfg to return an error when this occurs, and also
ensures that all the spans are in RED alarm.
For example, dahdi_cfg output when the card is not generating interrupts:
# dahdi_cfg
DAHDI startup failed: Input/output error
And the kernel log will contain a string like:
wct4xxp 0000:02:08.0: Interrupts not detected.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10380 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Allows dahdi_cfg to return an error code if a board driver fails it's startup
call for any reason.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Acked-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10379 a0bf4364-ded3-4de4-8d8a-66a801d63aff
voicebus_release is already called as part of the wctdm_back_out_gracefully()
call. If an Hx8 card fails to initialize, this will eliminate warnings from
the kernel such as:
WARNING: at kernel/irq/manage.c:904 __free_irq+0x94/0x173()
Trying to free already-free IRQ 18
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10377 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Use similar caculation as in the PRI module:
* Save timing_priority from spanconfig and
elect syncer when spanconfig is called.
* Create custom timing_priority() function that returns
the value or error if span is disconnected.
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: : Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10373 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* We must not block PCM during from 'search_fsk_pattern' channels.
* We must vmwi_search() not only on FXS_LINE_POL_ACTIVE, but also during
'neon_blinking' -- so we notice the message to turn it off.
* Also added 'search_fsk_pattern' and neon_blinking to /proc/.../fxs_info
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by: : Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10372 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Renamed most of the "vpm450m" references to just "vpm".
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10365 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Commit de47725, first released in 3.2-rc1 removed module.h from some
kernel headers. Include it explicitly now.
Resolves compilation errors like:
error: implicit declaration of function 'try_module_get'
error: 'THIS_MODULE' undeclared (first use in this function)
error: implicit declaration of function 'module_put'
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10361 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The ndo_set_multicast_list callback was removed in b81693d9, which was
first released in Linux Kernel 3.2-rc1
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10360 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Restores the pri_protocol attribute of the XPD node in SysFS to be
writable. Fixes a minor regression from the pinned-spans fix, similar to
r10334.
* This attribute was made R/O in digium r10280 as part of the
pinned-spans changes:
- The E1/T1 settings were changed via new set_spantype() method
which was called from dahdi when the 'spantype' dahdi attribute
was written to.
- This fails our init_card_4_* trying to write E1/T1 into our private
attribute.
* Restored our old code (with minor modifications) so we
can set E1/T1 the old way (writing to our 'pri_protocol' attribute)
as well as the new way (when it will be used eventually).
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10347 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Force some reserved bits to really be 1 in E1 mode (otherwise
terrorists will win).
(Closes issue DAHLIN-264)
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10346 a0bf4364-ded3-4de4-8d8a-66a801d63aff
A length of 1000 commands is not enough is some cases with CAS.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10341 a0bf4364-ded3-4de4-8d8a-66a801d63aff
An extra fix that was accidentally not included in r10013. Minor bug fixes.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10337 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This restores a somewhat limited functionality of the "span"
write interface in the SysFS node of the span, broken by the
pinned-spans code.
* PROBLEM: dahdi-linux pinned-spans should work with existing dahdi-tools
specifically the dahdi_registration tool.
* As a result, we should still be able to control dahdi registration
order. However, registration is now in complete devices and not spans
* Restored dahdi_autoreg=[0/1] xpp module parameter:
- It now refers to complete astribanks and not individual spans
* The xpp module sysfs "span" attribute:
- Implemented write method (for dahdi_registration tool)
- The first write of [1/0] to this attribute, registers/unregisters
the complete astribank
- Further writes are ignored (with DBG messages)
* Also, implemented new xbus_is_registered() function
* Once the new dahdi-tools are merged, we should turn deprecation
messages from DBG() to NOTICE()
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10334 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Some of the VPM loading / probing threads use global system workqueues. They
might now be running when we abort early so we should wait for them to
complete their runs before freeing memory that may be in use.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10332 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Otherwise, if the _dahdi_assign_span call fails, the dahdi_device will never
be removed from the dahdi_devices virtual bus and the board drivers will not
be reloadable.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10331 a0bf4364-ded3-4de4-8d8a-66a801d63aff
I misssed a small typo in r10328 "Extra debugging aids and messages" that
would force any span that supports a hardware preechocan to always fail
assignment with -EFAULT.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10330 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* Added dahdi_dev_dbg() macro to print when we don't (yet)
have a span number.
* Added a new debug category: DAHDI_DBG_ASSIGN
* Made sure error return code paths prints helpfull messages
* Promote error messages from INFO to NOTICE
* Change some errno values from EINVAL to EFAULT (internal
errors not caused by user input)
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Acked-by Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10328 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The test in _check_spanno_and_basechan() was off by one
(used '<' instead of '<=')
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10327 a0bf4364-ded3-4de4-8d8a-66a801d63aff
USB_FW rev 9964: includes a few stability bugfixes.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10323 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Removed a couple prints of instrumentation that was cluttering up the log output.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Acked-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10310 a0bf4364-ded3-4de4-8d8a-66a801d63aff
r10205 "dahdi: Check for master in DAHDI_STARTUP / resolves MeetMe
regression." did not handle the case for the wcb4xxp driver since it
would set DAHDI_FLAG_RUNNING as part of the probe. Therefore, the
DAHDI_STARTUP ioctl was never processed for it, creating a situation
where audio is missing on channels that are conferenced with channels on
the BRI spans.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10304 a0bf4364-ded3-4de4-8d8a-66a801d63aff
The NOTOPEN span alarm flag is set at span unassignment time.
* It needs to be cleared when the span is reassigned.
* That is: only if the span is actually connected.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10302 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* An xbus transport now have a "model_string" member
* The xpp_usb driver fills this with "usb:<idVendor>/<idProduct>/<bcdDevice>"
* It is passed via environment to the "init_card_<type>_<protocol>" scripts
* The FXS script uses this to condition two registers according to
the power supply model.
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10300 a0bf4364-ded3-4de4-8d8a-66a801d63aff
Since "wctdm24xxp: Probe for and configure modules in parallel." the
check for the VPMADT032 module was moved closer to after when the
interface was initialized. The 200ms timeout did not provide enough
time for the system to settle out after initial start. The result
was that sometimes after a cold boot the driver would fail to detect
any VPMADT032 modules.
This fixes a race condition that is not in any released branches.
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10296 a0bf4364-ded3-4de4-8d8a-66a801d63aff
- Cleaned up the OCT6114 interface .
- Relaxed the timeout waiting for OCT6114 bus cycle completion to 100 mS
and added a 2 mS delay time from OCT6114 reset to initialization.
This change only addresses issues that were created in the lab and not in the
field.
Signed-off-by: Doug Bailey <dbailey@digium.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10295 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This will allow the serial number to be exposed in sysfs and also
allow span assignment rules to use the serial number.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10292 a0bf4364-ded3-4de4-8d8a-66a801d63aff
This commit adds field upgradeable support for the TE820 firmware.
Firmware can now be silently upgraded as part of updating drivers
like most of the existing DAHDI firmware. Previous versions of dual
and quad span cards did not support upgrading firmware in the field.
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Fixed up some checkpatch issues:
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10291 a0bf4364-ded3-4de4-8d8a-66a801d63aff
TE820 is an 8-span PCI-express digital interface card. VPMOCT256 is a hardware
echo canceler that is able to provide echo cancelation on all 8-spans.
From: Matthew Fredrickson <creslin@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10290 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* So we can:
- Generate 'pinned-spans.conf' from existing state
- Run dahdi_cfg from udev (on specific span + its channels)
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10286 a0bf4364-ded3-4de4-8d8a-66a801d63aff
* We try very hard to help asterisk understand that we unassign spans.
* Implement disable_span():
- Set span + channels to DAHDI_ALARM_NOTOPEN
- qevent DAHDI_EVENT_REMOVED
* Use disable_span():
- in dahdi_unassign_span() and dahdi_unregister_device()
- with long msleep() so asterisk has a chance to get the message
- Out of the registration_mutex so we actually context switch.
* Also return more POLLERR variants (POLLRDHUP is not portable,
should be tested).
* Also improve printk(), fix rate_limit increment (was missing)
Signed-off-by: Oron Peled <oron.peled@xorcom.com>
Signed-off-by: Shaun Ruffell <sruffell@digium.com>
git-svn-id: http://svn.asterisk.org/svn/dahdi/linux/trunk@10285 a0bf4364-ded3-4de4-8d8a-66a801d63aff
