FGCOM/dahdi-linux
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

xpp: init_card_6_3: broadcasts for faster calibration

Browse Source 
FXS module type 6: Use broadcast write for a much faster
calibration at init time.

Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
This commit is contained in:
Dima Stoliarov 2017-02-27 17:14:57 +02:00 committed by Tzafrir Cohen
parent 9c0002bf1f
commit 24648e6eb3
1 changed files with 287 additions and 251 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

422
drivers/dahdi/xpp/init_card_6_30
View File

@ -276,7 +276,7 @@ sub write_ram($$$$) {
my $value_1; my $value_1;
my $value_2; my $value_2;
my $value_3; my $value_3;
my $log_output = sprintf("write_ram: %d, %4d, 0x%08X", $slic, $addr, $value); my $log_output = sprintf("write_ram: %s, %4d, 0x%08X", $slic, $addr, $value);
main::debug($log_output); main::debug($log_output);
$value = $value << $bits_shift; $value = $value << $bits_shift;
$addr_low = $addr & 0xFF; $addr_low = $addr & 0xFF;
@ -325,10 +325,15 @@ sub init_early() {
} }
sub load_patch($) { sub load_patch($) {
my $slic = shift; my $slics_ref = shift;
my @slics = @{ $slics_ref };
my $slic;
main::debug "Loading patch based on si3226x_patch_C_TSS_ISO_2014JUN18.c"; main::debug "Loading patch based on si3226x_patch_C_TSS_ISO_2014JUN18.c";
foreach $slic (@slics) {
FXS::set_user_mode($slic, 1); # Turn on user mode FXS::set_user_mode($slic, 1); # Turn on user mode
write_reg($slic, 81, 0x00); # JMPEN, disable the patch }
write_reg('*', 81, 0x00); # JMPEN, disable the patch
main::debug "=====Patch data======"; main::debug "=====Patch data======";
my @patch_data_array = ( my @patch_data_array = (
@ -587,9 +592,9 @@ sub load_patch($) {
524293, 524293,
); );
write_ram($slic, 1358, 0x00000000, 3); # PRAM_ADDR, reset the patch RAM address write_ram('*', 1358, 0x00000000, 3); # PRAM_ADDR, reset the patch RAM address
foreach my $val (@patch_data_array) { foreach my $val (@patch_data_array) {
write_ram($slic, 1359, $val, 12); # PRAM_DATA, shl 12, addr auto inc write_ram('*', 1359, $val, 12); # PRAM_DATA, shl 12, addr auto inc
} }
main::debug "=====Patch entries======"; # lowest 8 entries are registers main::debug "=====Patch entries======"; # lowest 8 entries are registers
@ -611,17 +616,17 @@ sub load_patch($) {
foreach my $val (@patch_entries_array) { foreach my $val (@patch_entries_array) {
last if $val == 0; last if $val == 0;
if ($jmp_table_low <= 97) { if ($jmp_table_low <= 97) {
write_reg($slic, $jmp_table_low, $val & 0xFF);# JMPnLO write_reg('*', $jmp_table_low, $val & 0xFF);# JMPnLO
$jmp_table_low++; $jmp_table_low++;
write_reg($slic, $jmp_table_low, $val >> 8 );# JMPnHI write_reg('*', $jmp_table_low, $val >> 8 );# JMPnHI
$jmp_table_low++; $jmp_table_low++;
} else { } else {
write_ram($slic, $jmp_table_high, $val & 0x1FFF, 3); # shl 3 write_ram('*', $jmp_table_high, $val & 0x1FFF, 3); # shl 3
$jmp_table_high++; $jmp_table_high++;
} }
} }
write_ram($slic, 448, 0x06182014, 3); # PATCH_ID, shl 3, a unique code which is a hash of the patch. write_ram('*', 448, 0x06182014, 3); # PATCH_ID, shl 3, a unique code which is a hash of the patch.
main::debug "=====Patch support======"; main::debug "=====Patch support======";
my @patch_support_addr_array = ( my @patch_support_addr_array = (
@ -669,15 +674,18 @@ sub load_patch($) {
for (my $i = 0; $i < @patch_support_addr_array; $i++) { for (my $i = 0; $i < @patch_support_addr_array; $i++) {
my $addr = $patch_support_addr_array[$i]; my $addr = $patch_support_addr_array[$i];
my $val = $patch_support_data_array[$i]; my $val = $patch_support_data_array[$i];
write_ram($slic, $addr, $val, 3); write_ram('*', $addr, $val, 3);
} }
if ($settings{debug}) { if ($settings{debug}) {
foreach $slic (@slics) {
main::debug "=====Verify patch======="; main::debug "=====Verify patch=======";
my $read_val; my $read_val;
write_ram($slic, 1358, 0x00000000, 3); # PRAM_ADDR, reset the patch RAM address # PRAM_ADDR, reset the patch RAM address:
write_ram($slic, 1358, 0x00000000, 3);
foreach my $val (@patch_data_array) { foreach my $val (@patch_data_array) {
$read_val = read_reg($slic, 1359, 'R', 12); # PRAM_DATA, shr 12, addr auto inc # PRAM_DATA, shr 12, addr auto inc
$read_val = read_reg($slic, 1359, 'R', 12);
if ($val != $read_val) { if ($val != $read_val) {
printf "0x%X =? 0x%X\n", $val, $read_val; printf "0x%X =? 0x%X\n", $val, $read_val;
printf "patch verification failed\n"; printf "patch verification failed\n";
@ -720,170 +728,183 @@ sub load_patch($) {
exit 0; exit 0;
} }
} }
main::logit "patch support has been verified!"; main::debug "patch support has been verified!";
}
} }
write_reg($slic, 81, 0x01); # JMPEN, enable the patch write_reg('*', 81, 0x01); # JMPEN, enable the patch
write_reg($slic, 05, 0x00); # RAM_ADDR_HI, back to normal RAM access write_reg('*', 05, 0x00); # RAM_ADDR_HI, back to normal RAM access
foreach $slic (@slics) {
FXS::set_user_mode($slic, 0); # Turn off user mode FXS::set_user_mode($slic, 0); # Turn off user mode
}
} }
sub load_general_params($) { sub load_general_params($) {
my $slic = shift; my $slics_ref = shift;
my @slics = @{ $slics_ref };
my $slic;
main::debug "Loading patch based on si3226x_patch_C_TSS_ISO_2014JUN18.c";
foreach $slic (@slics) {
FXS::set_user_mode($slic, 1); # Turn on user mode FXS::set_user_mode($slic, 1); # Turn on user mode
}
write_reg('*', 47, 0x00); # ENHANCE
write_reg('*', 80, 0x2F); # AUTO
write_ram('*', 764, 0x0050C480, 3); #BAT_HYST
write_reg($slic, 47, 0x00); # ENHANCE
write_reg($slic, 80, 0x2F); # AUTO
write_ram($slic, 764, 0x0050C480, 3); #BAT_HYST
# Ringing parameters 65Vrms 0Vdc 20Hz LPR # Ringing parameters 65Vrms 0Vdc 20Hz LPR
# Loop = 500.0 ft @ 0.044 ohms/ft, REN = 5, Rcpe = 600 ohms # Loop = 500.0 ft @ 0.044 ohms/ft, REN = 5, Rcpe = 600 ohms
# Rprot = 30 ohms, Type = LPR, Waveform = SINE # Rprot = 30 ohms, Type = LPR, Waveform = SINE
write_ram($slic, 637, 0x15E5200E, 3); #ringing impedance = 100 ohms write_ram('*', 637, 0x15E5200E, 3); #ringing impedance = 100 ohms
write_ram($slic, 766, 0xA3D705, 3); #VBATL_EXPECT 10 V write_ram('*', 766, 0xA3D705, 3); #VBATL_EXPECT 10 V
write_ram($slic, 767, 0xA3D705, 3); #VBATH_EXPECT 10 V write_ram('*', 767, 0xA3D705, 3); #VBATH_EXPECT 10 V
write_ram($slic, 768, 0x5ED285F, 3); #VBATR_EXPECT 92.6 V write_ram('*', 768, 0x5ED285F, 3); #VBATR_EXPECT 92.6 V
write_ram($slic, 768, 0xFFF0000, 3); #PWRSAVE_TIMER write_ram('*', 768, 0xFFF0000, 3); #PWRSAVE_TIMER
write_ram($slic, 916, 0x0F5C28F, 3); #OFFHOOK_THRESH write_ram('*', 916, 0x0F5C28F, 3); #OFFHOOK_THRESH
write_ram($slic, 919, 0x00F00000, 3); #VBAT_TRACK_MIN write_ram('*', 919, 0x00F00000, 3); #VBAT_TRACK_MIN
write_ram($slic, 920, 0x02000000, 3); #VBAT_TRACK_MIN_RNG write_ram('*', 920, 0x02000000, 3); #VBAT_TRACK_MIN_RNG
write_ram($slic, 970, 0x00800000, 3); #THERM_DBI write_ram('*', 970, 0x00800000, 3); #THERM_DBI
write_ram($slic, 1004, 0x00F18900, 3); #DCDC_VERR write_ram('*', 1004, 0x00F18900, 3); #DCDC_VERR
write_ram($slic, 1005, 0x0080C480, 3); #DCDC_VERR_HYST write_ram('*', 1005, 0x0080C480, 3); #DCDC_VERR_HYST
write_ram($slic, 1006, 0x00800000, 3); #DCDC_OITHRESH_LO write_ram('*', 1006, 0x00800000, 3); #DCDC_OITHRESH_LO
write_ram($slic, 1007, 0x01F00000, 3); #DCDC_OITHRESH_HI write_ram('*', 1007, 0x01F00000, 3); #DCDC_OITHRESH_HI
write_ram($slic, 1540, 0x00200000, 3); #PD_UVLO write_ram('*', 1540, 0x00200000, 3); #PD_UVLO
write_ram($slic, 1541, 0x00300000, 3); #PD_OVLO write_ram('*', 1541, 0x00300000, 3); #PD_OVLO
write_ram($slic, 1542, 0x00200000, 3); #PD_OCLO write_ram('*', 1542, 0x00200000, 3); #PD_OCLO
write_ram($slic, 1545, 0x00C00000, 3); #DCDC_UVHYST, (94v - 90v -1) / 0.257v = 12 write_ram('*', 1545, 0x00C00000, 3); #DCDC_UVHYST, (94v - 90v -1) / 0.257v = 12
write_ram($slic, 1546, 0x03D00000, 3); #DCDC_UVTHRESH, 94v / 1.543v = 61 write_ram('*', 1546, 0x03D00000, 3); #DCDC_UVTHRESH, 94v / 1.543v = 61
write_ram($slic, 1547, 0x1200000, 3); #DCDC_OVTHRESH write_ram('*', 1547, 0x1200000, 3); #DCDC_OVTHRESH
write_ram($slic, 1554, 0x07700000, 3); #DCDC_UVPOL write_ram('*', 1554, 0x07700000, 3); #DCDC_UVPOL
write_ram($slic, 1558, 0x00000000, 3); #DCDC_VREF_CTRL write_ram('*', 1558, 0x00000000, 3); #DCDC_VREF_CTRL
write_ram($slic, 1560, 0x00200000, 3); #DCDC_RNGTYPE write_ram('*', 1560, 0x00200000, 3); #DCDC_RNGTYPE
write_ram($slic, 1585, 0x00300000, 3); #DCDC_ANA_GAIN write_ram('*', 1585, 0x00300000, 3); #DCDC_ANA_GAIN
write_ram($slic, 1586, 0x00300000, 3); #DCDC_ANA_TOFF write_ram('*', 1586, 0x00300000, 3); #DCDC_ANA_TOFF
write_ram($slic, 1587, 0x00100000, 3); #DCDC_ANA_TONMIN write_ram('*', 1587, 0x00100000, 3); #DCDC_ANA_TONMIN
write_ram($slic, 1588, 0x00FFC000, 3); #DCDC_ANA_TONMAX write_ram('*', 1588, 0x00FFC000, 3); #DCDC_ANA_TONMAX
write_ram($slic, 1589, 0x00F00000, 3); #DCDC_ANA_DSHIFT write_ram('*', 1589, 0x00F00000, 3); #DCDC_ANA_DSHIFT
write_ram($slic, 1590, 0x0FDA4000, 3); #DCDC_ANA_LPOLY write_ram('*', 1590, 0x0FDA4000, 3); #DCDC_ANA_LPOLY
write_ram($slic, 759, 0x07FEB800, 3); # COEF_P_HVIC write_ram('*', 759, 0x07FEB800, 3); # COEF_P_HVIC
write_ram($slic, 756, 0x0048D15B, 3); # P_TH_HVIC write_ram('*', 756, 0x0048D15B, 3); # P_TH_HVIC
write_ram($slic, 967, 0x03A2E8BA, 3); # SCALE_KAUDIO write_ram('*', 967, 0x03A2E8BA, 3); # SCALE_KAUDIO
# /* GC RAM locations that moved from RevB to RevC */ # /* GC RAM locations that moved from RevB to RevC */
write_ram($slic, 1018, 0x03000000, 3); # LKG_OFHK_OFFSET write_ram('*', 1018, 0x03000000, 3); # LKG_OFHK_OFFSET
write_ram($slic, 1017, 0x05000000, 3); # LKG_LB_OFFSET write_ram('*', 1017, 0x05000000, 3); # LKG_LB_OFFSET
write_ram($slic, 1013, 0x02200000, 3); # VBATH_DELTA write_ram('*', 1013, 0x02200000, 3); # VBATH_DELTA
write_ram($slic, 1012, 0x03700000, 3); # UVTHRESH_MAX write_ram('*', 1012, 0x03700000, 3); # UVTHRESH_MAX
write_ram($slic, 1011, 0x04F80200, 3); # UVTHRESH_SCALE write_ram('*', 1011, 0x04F80200, 3); # UVTHRESH_SCALE
write_ram($slic, 1010, 0x00A23000, 3); # UVTHRESH_BIAS write_ram('*', 1010, 0x00A23000, 3); # UVTHRESH_BIAS
# /* Hardcoded mods to default settings */ # /* Hardcoded mods to default settings */
write_reg($slic, 98, 0x80); #PDN write_reg('*', 98, 0x80); #PDN
write_ram($slic, 626, 0x723F235, 3); # ROW0_C2 write_ram('*', 626, 0x723F235, 3); # ROW0_C2
write_ram($slic, 627, 0x57A9804, 3); # ROW1_C2 write_ram('*', 627, 0x57A9804, 3); # ROW1_C2
write_ram($slic, 918, 0x36000, 3); # XTALK_TIMER write_ram('*', 918, 0x36000, 3); # XTALK_TIMER
write_ram($slic, 1616, 0x1100000, 3); # DCDC_CPUMP_LP_MASK write_ram('*', 1616, 0x1100000, 3); # DCDC_CPUMP_LP_MASK
#/* Smart VOV Default Settings - set here in case no ring preset is loaded */ #/* Smart VOV Default Settings - set here in case no ring preset is loaded */
write_ram($slic, 973, 0xFFFFFF, 3); # VOV_DCDC_SLOPE write_ram('*', 973, 0xFFFFFF, 3); # VOV_DCDC_SLOPE
write_ram($slic, 974, 0xA18937, 3); # VOV_DCDC_OS write_ram('*', 974, 0xA18937, 3); # VOV_DCDC_OS
write_ram($slic, 975, 0xE49BA5, 3); # VOV_RING_BAT_MAX write_ram('*', 975, 0xE49BA5, 3); # VOV_RING_BAT_MAX
write_ram($slic, 516, 0x10038D, 3); # VDIFFLPF write_ram('*', 516, 0x10038D, 3); # VDIFFLPF
write_ram($slic, 513, 0x4EDDB9, 3); # ILOOPLPF write_ram('*', 513, 0x4EDDB9, 3); # ILOOPLPF
write_ram($slic, 514, 0x806D6, 3); # ILONGLPF write_ram('*', 514, 0x806D6, 3); # ILONGLPF
write_ram($slic, 517, 0x10059F, 3); # VCMLPF write_ram('*', 517, 0x10059F, 3); # VCMLPF
write_ram($slic, 708, 0xF0000, 3); # CM_SPEEDUP_TIMER write_ram('*', 708, 0xF0000, 3); # CM_SPEEDUP_TIMER
write_ram($slic, 709, 0x106240, 3); # VCM_TH write_ram('*', 709, 0x106240, 3); # VCM_TH
# /* Prevent Ref Osc from powering down in PLL Freerun mode (pd_ref_osc) */ # /* Prevent Ref Osc from powering down in PLL Freerun mode (pd_ref_osc) */
# write_ram($slic, 709, 0x106240, 3); # PWRSAVE_CTRL_LO shall be arithmetic here # write_ram('*', 709, 0x106240, 3); # PWRSAVE_CTRL_LO shall be arithmetic here
# batType == VCM_HYST # batType == VCM_HYST
write_ram($slic, 1565, 0xC00000, 3); # write_ram('*', 1565, 0xC00000, 3); #
write_ram($slic, 750, 0x0306280, 3); #VCM_HYST write_ram('*', 750, 0x0306280, 3); #VCM_HYST
write_ram($slic, 971, 0x2A00000, 3); #LPR_SCALE write_ram('*', 971, 0x2A00000, 3); #LPR_SCALE
write_ram($slic, 972, 0x061EB80, 3); #LPR_CM_OS write_ram('*', 972, 0x061EB80, 3); #LPR_CM_OS
write_ram($slic, 1565, 0x0A00000, 3); #DCDC_OIMASK write_ram('*', 1565, 0x0A00000, 3); #DCDC_OIMASK
write_ram($slic, 1643, 0x000000, 3); #DCDC_OV_DEBOUNCE write_ram('*', 1643, 0x000000, 3); #DCDC_OV_DEBOUNCE
write_ram($slic, 1641, 0x0D00000, 3); #DCDC_UV_DEBOUNCE write_ram('*', 1641, 0x0D00000, 3); #DCDC_UV_DEBOUNCE
write_ram($slic, 1512, 0x00200000, 3); # PD_OFFLD_DAC write_ram('*', 1512, 0x00200000, 3); # PD_OFFLD_DAC
write_ram($slic, 1513, 0x00200000, 3); # PD_OFFLD_GM write_ram('*', 1513, 0x00200000, 3); # PD_OFFLD_GM
write_ram($slic, 1592, 0x0300000, 3); #DCDC_PD_ANA write_ram('*', 1592, 0x0300000, 3); #DCDC_PD_ANA
write_ram($slic, 897, 0x0480CBF, 3); #P_TH_OFFLOAD write_ram('*', 897, 0x0480CBF, 3); #P_TH_OFFLOAD
write_reg($slic, 35, 0x03); #OFFLOAD write_reg('*', 35, 0x03); #OFFLOAD
write_ram($slic, 1553, 0x00000000, 3); #DCDC_SWDRV_POL write_ram('*', 1553, 0x00000000, 3); #DCDC_SWDRV_POL
write_ram($slic, 860, 0x008B9ACA, 3); # IRING_LIM (90.000 mA) write_ram('*', 860, 0x008B9ACA, 3); # IRING_LIM (90.000 mA)
foreach $slic (@slics) {
FXS::set_user_mode($slic, 0); # Turn on user mode FXS::set_user_mode($slic, 0); # Turn on user mode
}
# Loading Coeff before cal to ensure accurate zsynth results in OHT # Loading Coeff before cal to ensure accurate zsynth results in OHT
# This set of coefficients are for the following input parameters: # This set of coefficients are for the following input parameters:
# Device = Si3217x, R1 = 600, R2 = 0, C = 0, R_surge = 20, R_fuse = 24, 10.txt # Device = Si3217x, R1 = 600, R2 = 0, C = 0, R_surge = 20, R_fuse = 24, 10.txt
# Generated on 9/30/2009 2:51:17 PM # Generated on 9/30/2009 2:51:17 PM
# TXACEQ # TXACEQ
write_ram($slic, 540, 0x07F55480, 3); #TXACEQ_CO write_ram('*', 540, 0x07F55480, 3); #TXACEQ_CO
write_ram($slic, 541, 0x000D6400, 3); #TXACEQ_C1 write_ram('*', 541, 0x000D6400, 3); #TXACEQ_C1
write_ram($slic, 542, 0x00011A00, 3); #TXACEQ_C2 write_ram('*', 542, 0x00011A00, 3); #TXACEQ_C2
write_ram($slic, 543, 0x1FFD7F00, 3); #TXACEQ_C3 write_ram('*', 543, 0x1FFD7F00, 3); #TXACEQ_C3
# RXACEQ # RXACEQ
write_ram($slic, 546, 0x07F04900, 3); #RXACEQ_CO write_ram('*', 546, 0x07F04900, 3); #RXACEQ_CO
write_ram($slic, 547, 0x00126A00, 3); #RXACEQ_C1 write_ram('*', 547, 0x00126A00, 3); #RXACEQ_C1
write_ram($slic, 548, 0x1FFE1D00, 3); #RXACEQ_C2 write_ram('*', 548, 0x1FFE1D00, 3); #RXACEQ_C2
write_ram($slic, 549, 0x1FFC9480, 3); #RXACEQ_C3 write_ram('*', 549, 0x1FFC9480, 3); #RXACEQ_C3
# ECFIR/ECIIR # ECFIR/ECIIR
write_ram($slic, 563, 0x0012A580, 3); #ECFIR_C2 write_ram('*', 563, 0x0012A580, 3); #ECFIR_C2
write_ram($slic, 564, 0x1FE59900, 3); #ECFIR_C3 write_ram('*', 564, 0x1FE59900, 3); #ECFIR_C3
write_ram($slic, 565, 0x01BCB180, 3); #ECFIR_C4 write_ram('*', 565, 0x01BCB180, 3); #ECFIR_C4
write_ram($slic, 566, 0x00790780, 3); #ECFIR_C5 write_ram('*', 566, 0x00790780, 3); #ECFIR_C5
write_ram($slic, 567, 0x02113380, 3); #ECFIR_C6 write_ram('*', 567, 0x02113380, 3); #ECFIR_C6
write_ram($slic, 568, 0x1F172380, 3); #ECFIR_C7 write_ram('*', 568, 0x1F172380, 3); #ECFIR_C7
write_ram($slic, 569, 0x00805080, 3); #ECFIR_C8 write_ram('*', 569, 0x00805080, 3); #ECFIR_C8
write_ram($slic, 570, 0x1FD6E600, 3); #ECFIR_C9 write_ram('*', 570, 0x1FD6E600, 3); #ECFIR_C9
write_ram($slic, 571, 0x1FFDF800, 3); #ECIIR_B0 write_ram('*', 571, 0x1FFDF800, 3); #ECIIR_B0
write_ram($slic, 572, 0x00010980, 3); #ECIIR_B1 write_ram('*', 572, 0x00010980, 3); #ECIIR_B1
write_ram($slic, 573, 0x0E46D280, 3); #ECIIR_A1 write_ram('*', 573, 0x0E46D280, 3); #ECIIR_A1
write_ram($slic, 574, 0x19B4F900, 3); #ECIIR_A2 write_ram('*', 574, 0x19B4F900, 3); #ECIIR_A2
# ZSYNTH # ZSYNTH
write_ram($slic, 653, 0x007A8C00, 3); #ZSYNTH_B0 write_ram('*', 653, 0x007A8C00, 3); #ZSYNTH_B0
write_ram($slic, 654, 0x1F0BB880, 3); #ZSYNTH_B1 write_ram('*', 654, 0x1F0BB880, 3); #ZSYNTH_B1
write_ram($slic, 655, 0x0079BD00, 3); #ZSYNTH_B2 write_ram('*', 655, 0x0079BD00, 3); #ZSYNTH_B2
write_ram($slic, 656, 0x0FF66D00, 3); #ZSYNTH_A1 write_ram('*', 656, 0x0FF66D00, 3); #ZSYNTH_A1
write_ram($slic, 657, 0x18099080, 3); #ZSYNTH_A2 write_ram('*', 657, 0x18099080, 3); #ZSYNTH_A2
write_reg($slic, 45, 0x59); #RA write_reg('*', 45, 0x59); #RA
# TXGAIN/RXGAIN # TXGAIN/RXGAIN
write_ram($slic, 544, 0x08769A80, 3); #TXACGAIN write_ram('*', 544, 0x08769A80, 3); #TXACGAIN
write_ram($slic, 545, 0x0141E080, 3); #RXACGAIN write_ram('*', 545, 0x0141E080, 3); #RXACGAIN
write_ram($slic, 906, 0x0141E080, 3); #RXACGAIN_SAVE write_ram('*', 906, 0x0141E080, 3); #RXACGAIN_SAVE
# RXACHPF # RXACHPF
write_ram($slic, 658, 0x07AC0400, 3); #RXACHPF_B0_1 write_ram('*', 658, 0x07AC0400, 3); #RXACHPF_B0_1
write_ram($slic, 659, 0x1853FC80, 3); #RXACHPF_B1_1 write_ram('*', 659, 0x1853FC80, 3); #RXACHPF_B1_1
write_ram($slic, 660, 0x07580880, 3); #RXACHPF_A1_1 write_ram('*', 660, 0x07580880, 3); #RXACHPF_A1_1
write_ram($slic, 666, 0x8000000, 3); #RXACHPF_GAIN write_ram('*', 666, 0x8000000, 3); #RXACHPF_GAIN
foreach $slic (@slics) {
FXS::set_user_mode($slic, 1); # Turn on user mode FXS::set_user_mode($slic, 1); # Turn on user mode
write_reg($slic, 98, 0x80); # Power up MADC }
write_reg('*', 98, 0x80); # Power up MADC
foreach $slic (@slics) {
FXS::set_user_mode($slic, 0); # Turn off user mode FXS::set_user_mode($slic, 0); # Turn off user mode
}
} }
sub calibrate_slics($$$$) { sub calibrate_slics($$$$) {
@ -976,79 +997,91 @@ sub check_slics() {
} }
sub load_custom_preset($) { sub load_custom_preset($) {
my $slic = shift; my $slics_ref = shift;
FXS::set_user_mode($slic, 1); # Turn on user mode my @slics = @{ $slics_ref };
write_ram($slic, 755, 0x00050000, 3); #RTPER my $slic;
write_ram($slic, 844, 0x7EFE000, 3); #RINGFR = 20Hz
write_ram($slic, 845, 0x00208847, 3); #RINGAMP = 53 Vrms open circuit with 100ohm ring impedance
write_ram($slic, 846, 0x00000000, 3); #RINGPHAS
write_ram($slic, 843, 0x00000000, 3); #RINGOF
write_ram($slic, 637, 0x15E5200E, 3); #SLOPE_RING (100.000 ohms)
write_ram($slic, 848, 0x007B9068, 3); #RTACTH (68.236 mA)
write_ram($slic, 847, 0x0FFFFFFF, 3); #RTDCTH (450.000 mA) */
write_ram($slic, 850, 0x00006000, 3); #RTACDB (75.000 ms)
write_ram($slic, 849, 0x00006000, 3); #RTDCDB (75.000 ms)
write_ram($slic, 753, 0x00C49BA0, 3); # VOV_RING_BAT (12.000 v)
write_ram($slic, 896, 0x00000000, 3); # VOV_RING_GND (0.000 v)
write_ram($slic, 975, 0xE49BA5, 3);#vov_ring_bat_max = ~14V
write_reg($slic, 39, 0x80); #RINGTALO main::debug "Loading patch based on si3226x_patch_C_TSS_ISO_2014JUN18.c";
write_reg($slic, 40, 0x3E); #RINGTAHI foreach $slic (@slics) {
write_reg($slic, 41, 0x00); #RINGTILO FXS::set_user_mode($slic, 1); # Turn on user mode
write_reg($slic, 42, 0x7D); #RINGTIHI }
write_reg($slic, 38, 0x80); #RINGCON Both timers are disabled; enable LPR write_ram('*', 755, 0x00050000, 3); #RTPER
write_ram($slic, 483, 0x28C000, 3);#delta_vcm: This means ring side needs 2v extra. write_ram('*', 844, 0x7EFE000, 3); #RINGFR = 20Hz
write_ram($slic, 973, 0xFFFFFF, 3);# slope_vov_dcdc write_ram('*', 845, 0x00208847, 3); #RINGAMP = 53 Vrms open circuit with 100ohm ring impedance
write_ram($slic, 974, 0xA18937, 3);# vov_dcdc_os = ~10v write_ram('*', 846, 0x00000000, 3); #RINGPHAS
write_ram($slic, 509, 0x00C49BA0, 3);# VOV_RING_BAT (12.000 v) write_ram('*', 843, 0x00000000, 3); #RINGOF
write_ram($slic, 975, 0xE49BA5, 3);#vov_ring_bat_max = ~14V write_ram('*', 637, 0x15E5200E, 3); #SLOPE_RING (100.000 ohms)
write_ram($slic, 971, 0x2A00000, 3);# scale for LPR amplitude, full scale 28-bit write_ram('*', 848, 0x007B9068, 3); #RTACTH (68.236 mA)
write_ram($slic, 972, 0x61EB80, 3);# 6v CM offset write_ram('*', 847, 0x0FFFFFFF, 3); #RTDCTH (450.000 mA) */
write_ram($slic, 970, 0x800000, 3);# write_ram('*', 850, 0x00006000, 3); #RTACDB (75.000 ms)
write_ram('*', 849, 0x00006000, 3); #RTDCDB (75.000 ms)
write_ram('*', 753, 0x00C49BA0, 3); # VOV_RING_BAT (12.000 v)
write_ram('*', 896, 0x00000000, 3); # VOV_RING_GND (0.000 v)
write_ram('*', 975, 0xE49BA5, 3);#vov_ring_bat_max = ~14V
write_reg('*', 39, 0x80); #RINGTALO
write_reg('*', 40, 0x3E); #RINGTAHI
write_reg('*', 41, 0x00); #RINGTILO
write_reg('*', 42, 0x7D); #RINGTIHI
write_reg('*', 38, 0x80); #RINGCON Both timers are disabled; enable LPR
write_ram('*', 483, 0x28C000, 3);#delta_vcm: This means ring side needs 2v extra.
write_ram('*', 973, 0xFFFFFF, 3);# slope_vov_dcdc
write_ram('*', 974, 0xA18937, 3);# vov_dcdc_os = ~10v
write_ram('*', 509, 0x00C49BA0, 3);# VOV_RING_BAT (12.000 v)
write_ram('*', 975, 0xE49BA5, 3);#vov_ring_bat_max = ~14V
write_ram('*', 971, 0x2A00000, 3);# scale for LPR amplitude, full scale 28-bit
write_ram('*', 972, 0x61EB80, 3);# 6v CM offset
write_ram('*', 970, 0x800000, 3);#
# DC_FEED: # DC_FEED:
write_ram($slic, 634, 0x1C8A024C, 3); # SLOPE_VLIM write_ram('*', 634, 0x1C8A024C, 3); # SLOPE_VLIM
write_ram($slic, 635, 0x1E3081AA, 3); # SLOPE_RFEED write_ram('*', 635, 0x1E3081AA, 3); # SLOPE_RFEED
write_ram($slic, 636, 0x0040A0E0, 3); # SLOPE_ILIM write_ram('*', 636, 0x0040A0E0, 3); # SLOPE_ILIM
write_ram($slic, 638, 0x1B27130B, 3); # SLOPE_DELTA1 write_ram('*', 638, 0x1B27130B, 3); # SLOPE_DELTA1
write_ram($slic, 639, 0x1DD87A3E, 3); # SLOPE_DELTA2 write_ram('*', 639, 0x1DD87A3E, 3); # SLOPE_DELTA2
# write_ram($slic, 640, 0x043AA4A6, 3); # V_VLIM (36.000 v) # write_ram('*', 640, 0x043AA4A6, 3); # V_VLIM (36.000 v)
write_ram($slic, 640, 0x034A1036, 3); # V_VLIM (28.000 v) write_ram('*', 640, 0x034A1036, 3); # V_VLIM (28.000 v)
write_ram($slic, 641, 0x03A446AC, 3); # V_RFEED (31.000 v) write_ram('*', 641, 0x03A446AC, 3); # V_RFEED (31.000 v)
write_ram($slic, 642, 0x034A0E48, 3); # V_ILIM (28.000 v) write_ram('*', 642, 0x034A0E48, 3); # V_ILIM (28.000 v)
write_ram($slic, 643, 0x01363429, 3); # CONST_RFEED (15.000 mA) write_ram('*', 643, 0x01363429, 3); # CONST_RFEED (15.000 mA)
write_ram($slic, 644, 0x005D0FA6, 3); # CONST_ILIM = 20 mA write_ram('*', 644, 0x005D0FA6, 3); # CONST_ILIM = 20 mA
write_ram($slic, 645, 0x00222A30, 3); # I_VLIM = 0.000 mA write_ram('*', 645, 0x00222A30, 3); # I_VLIM = 0.000 mA
write_ram($slic, 853, 0x005B0AFB, 3); # LCRONHK (10.000 mA) write_ram('*', 853, 0x005B0AFB, 3); # LCRONHK (10.000 mA)
write_ram($slic, 852, 0x006D4060, 3); # LCROFFHK (12.000 mA) write_ram('*', 852, 0x006D4060, 3); # LCROFFHK (12.000 mA)
write_ram($slic, 701, 0x00008000, 3); # LCRDBI (5.000 ms) write_ram('*', 701, 0x00008000, 3); # LCRDBI (5.000 ms)
write_ram($slic, 858, 0x0048D595, 3); # LONGHITH (8.000 mA) write_ram('*', 858, 0x0048D595, 3); # LONGHITH (8.000 mA)
write_ram($slic, 859, 0x003FBAE2, 3); # LONGLOTH (7.000 mA) write_ram('*', 859, 0x003FBAE2, 3); # LONGLOTH (7.000 mA)
write_ram($slic, 702, 0x00008000, 3); # LONGDBI (5.000 ms) write_ram('*', 702, 0x00008000, 3); # LONGDBI (5.000 ms)
write_ram($slic, 854, 0x000F0000, 3); # LCRMASK (150.000 ms) write_ram('*', 854, 0x000F0000, 3); # LCRMASK (150.000 ms)
write_ram($slic, 855, 0x00080000, 3); # LCRMASK_POLREV (80.000 ms) write_ram('*', 855, 0x00080000, 3); # LCRMASK_POLREV (80.000 ms)
write_ram($slic, 856, 0x00140000, 3); # LCRMASK_STATE (200.000 ms) write_ram('*', 856, 0x00140000, 3); # LCRMASK_STATE (200.000 ms)
write_ram($slic, 857, 0x00140000, 3); # LCRMASK_LINECAP (200.000 ms) write_ram('*', 857, 0x00140000, 3); # LCRMASK_LINECAP (200.000 ms)
write_ram($slic, 748, 0x01BA5E35, 3); # VCM_OH (27.000 v) write_ram('*', 748, 0x01BA5E35, 3); # VCM_OH (27.000 v)
write_ram($slic, 752, 0x0051EB85, 3); # VOV_BAT (5.000 v) write_ram('*', 752, 0x0051EB85, 3); # VOV_BAT (5.000 v)
write_ram($slic, 751, 0x00415F45, 3); # VOV_GND (3.990 v) write_ram('*', 751, 0x00415F45, 3); # VOV_GND (3.990 v)
write_reg($slic, 46, 0x04); # zcal_en write_reg('*', 46, 0x04); # zcal_en
write_reg($slic, 23, 0x10); # DTMF_EN = 1 Enable Interupts in IRQ2 Register 19 write_reg('*', 23, 0x10); # DTMF_EN = 1 Enable Interupts in IRQ2 Register 19
write_reg($slic, 24, 0x03); # P_HVIC_IE = 1, P_THERM_IE = 1 Enable Interupts in IRQ3 Register 20 write_reg('*', 24, 0x03); # P_HVIC_IE = 1, P_THERM_IE = 1 Enable Interupts in IRQ3 Register 20
write_reg($slic, 66, 0x00); # USERSTAT write_reg('*', 66, 0x00); # USERSTAT
write_reg($slic, 71, 0x00); # DIAG1 write_reg('*', 71, 0x00); # DIAG1
write_ram($slic, 799, 95 * 1074 * 1000, 3); #PRAM_VBATH_NEON = -95 V write_ram('*', 799, 95 * 1074 * 1000, 3); #PRAM_VBATH_NEON = -95 V
write_ram($slic, 786, 70 * 65536, 3); #PRAM_LCRMASK_MWI = 70 mSec write_ram('*', 786, 70 * 65536, 3); #PRAM_LCRMASK_MWI = 70 mSec
foreach $slic (@slics) {
FXS::set_linefeed($slic, 1); FXS::set_linefeed($slic, 1);
write_ram($slic, 918, 0x36000, 3); }
write_ram('*', 918, 0x36000, 3);
foreach $slic (@slics) {
FXS::set_user_mode($slic, 1); # Turn on user mode FXS::set_user_mode($slic, 1); # Turn on user mode
write_ram($slic, 1018, 0x03000000, 3); # LKG_OFHK_OFFSET }
write_ram($slic, 1017, 0x05000000, 3); # LKG_LB_OFFSET write_ram('*', 1018, 0x03000000, 3); # LKG_OFHK_OFFSET
write_ram('*', 1017, 0x05000000, 3); # LKG_LB_OFFSET
foreach $slic (@slics) {
if (($slic & 0x01) == 0) { if (($slic & 0x01) == 0) {
FXS::set_linefeed($slic, 0); FXS::set_linefeed($slic, 0);
write_ram($slic, 1538, 0x00600000, 3); write_ram($slic, 1538, 0x00600000, 3);
@ -1056,6 +1089,7 @@ sub load_custom_preset($) {
write_ram($slic & 0xFE, 1538, 0x00400000, 3); write_ram($slic & 0xFE, 1538, 0x00400000, 3);
} }
FXS::set_user_mode($slic, 0); # Turn off user mode FXS::set_user_mode($slic, 0); # Turn off user mode
}
} }
sub configure_pcm($) { sub configure_pcm($) {
@ -1090,31 +1124,33 @@ FXS::read_defaults();
FXS::soft_reset(); FXS::soft_reset();
@SlicNums = FXS::check_slics(); @SlicNums = FXS::check_slics();
FXS::init_early(); FXS::init_early();
foreach my $slic (@SlicNums) { FXS::load_patch(\@SlicNums);
FXS::load_patch($slic); FXS::load_general_params(\@SlicNums);
FXS::load_general_params($slic);
if($settings{fxs_skip_calib}) { if($settings{fxs_skip_calib}) {
main::logit "==== WARNING: SKIPPED SLIC CALIBRATION ====="; main::logit "==== WARNING: SKIPPED SLIC CALIBRATION =====";
} else { } else {
foreach my $slic (@SlicNums) {
FXS::calibrate_slics($slic, 0x00, 0x00, 0x01); FXS::calibrate_slics($slic, 0x00, 0x00, 0x01);
}
main::mysleep(0.060); main::mysleep(0.060);
foreach my $slic (@SlicNums) {
FXS::dc_powerup($slic); FXS::dc_powerup($slic);
FXS::calibrate_slics($slic, 0x00, 0xC0, 0x18); # remaining cals (except mads, lb) FXS::calibrate_slics($slic, 0x00, 0xC0, 0x18); # remaining cals (except mads, lb)
}
main::mysleep(0.700); main::mysleep(0.700);
foreach my $slic (@SlicNums) {
FXS::set_linefeed($slic, 0); FXS::set_linefeed($slic, 0);
FXS::set_linefeed($slic, 1); FXS::set_linefeed($slic, 1);
}
main::mysleep(0.010); main::mysleep(0.010);
#FXS::calibrate_slics($slic, 0x0F, 0x00, 0x00); # #FXS::calibrate_slics($slic, 0x0F, 0x00, 0x00); #
main::mysleep(1.000); main::mysleep(1.000);
}
FXS::load_custom_preset($slic);
} }
FXS::load_custom_preset(\@SlicNums);
foreach my $slic (@SlicNums) { foreach my $slic (@SlicNums) {
FXS::configure_pcm($slic); FXS::configure_pcm($slic);
}
foreach my $slic (@SlicNums) {
FXS::set_linefeed($slic, 1); FXS::set_linefeed($slic, 1);
} }