2010-08-28 05:59:27 +08:00
|
|
|
/*
|
|
|
|
* Digium, Inc. Wildcard TE110P T1/PRI card Driver
|
|
|
|
*
|
|
|
|
* Written by Mark Spencer <markster@digium.com>
|
|
|
|
* Matthew Fredrickson <creslin@digium.com>
|
|
|
|
* William Meadows <wmeadows@digium.com>
|
|
|
|
*
|
|
|
|
* Copyright (C) 2004, Digium, Inc.
|
|
|
|
*
|
|
|
|
* All rights reserved.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* See http://www.asterisk.org for more information about
|
|
|
|
* the Asterisk project. Please do not directly contact
|
|
|
|
* any of the maintainers of this project for assistance;
|
|
|
|
* the project provides a web site, mailing lists and IRC
|
|
|
|
* channels for your use.
|
|
|
|
*
|
|
|
|
* This program is free software, distributed under the terms of
|
|
|
|
* the GNU General Public License Version 2 as published by the
|
|
|
|
* Free Software Foundation. See the LICENSE file included with
|
|
|
|
* this program for more details.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <linux/moduleparam.h>
|
2014-02-28 23:28:46 +08:00
|
|
|
#include <linux/slab.h>
|
2010-08-28 05:59:27 +08:00
|
|
|
|
|
|
|
#include <dahdi/kernel.h>
|
|
|
|
|
|
|
|
/* XXX: fix this */
|
|
|
|
#include "wct4xxp/wct4xxp.h" /* For certain definitions */
|
|
|
|
|
|
|
|
#define WC_MAX_CARDS 32
|
|
|
|
|
|
|
|
/*
|
|
|
|
#define TEST_REGS
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Define to get more attention-grabbing but slightly more I/O using
|
|
|
|
alarm status */
|
|
|
|
#define FANCY_ALARM
|
|
|
|
|
|
|
|
/* Define to enable the V2.1 errata register settings */
|
|
|
|
#if 0
|
|
|
|
#define TRUST_INFINEON_ERRATA
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define DELAY 0x0 /* 30 = 15 cycles, 10 = 8 cycles, 0 = 3 cycles */
|
|
|
|
|
|
|
|
#define WC_CNTL 0x00
|
|
|
|
#define WC_OPER 0x01
|
|
|
|
#define WC_AUXC 0x02
|
|
|
|
#define WC_AUXD 0x03
|
|
|
|
#define WC_MASK0 0x04
|
|
|
|
#define WC_MASK1 0x05
|
|
|
|
#define WC_INTSTAT 0x06
|
|
|
|
|
|
|
|
#define WC_DMAWS 0x08
|
|
|
|
#define WC_DMAWI 0x0c
|
|
|
|
#define WC_DMAWE 0x10
|
|
|
|
#define WC_DMARS 0x18
|
|
|
|
#define WC_DMARI 0x1c
|
|
|
|
#define WC_DMARE 0x20
|
|
|
|
#define WC_CURPOS 0x24
|
|
|
|
|
|
|
|
#define WC_SERC 0x2d
|
|
|
|
#define WC_FSCDELAY 0x2f
|
|
|
|
|
|
|
|
#define WC_USERREG 0xc0
|
|
|
|
|
|
|
|
#define WC_CLOCK 0x0
|
|
|
|
#define WC_LEDTEST 0x1
|
|
|
|
#define WC_VERSION 0x2
|
|
|
|
|
|
|
|
/* Offset between transmit and receive */
|
|
|
|
#define WC_OFFSET 4
|
|
|
|
|
|
|
|
#define BIT_CS (1 << 7)
|
|
|
|
#define BIT_ADDR (0xf << 3)
|
|
|
|
|
|
|
|
#define BIT_LED1 (1 << 0)
|
|
|
|
#define BIT_LED0 (1 << 1)
|
|
|
|
#define BIT_TEST (1 << 2)
|
|
|
|
|
|
|
|
#define FLAG_STARTED (1 << 0)
|
|
|
|
#define FLAG_NMF (1 << 1)
|
|
|
|
#define FLAG_SENDINGYELLOW (1 << 2)
|
|
|
|
#define FLAG_FALC12 (1 << 3)
|
|
|
|
|
|
|
|
#define TYPE_T1 1 /* is a T1 card */
|
|
|
|
#define TYPE_E1 2 /* is an E1 card */
|
|
|
|
|
|
|
|
static int chanmap_t1[] =
|
|
|
|
{ 2,1,0,
|
|
|
|
6,5,4,
|
|
|
|
10,9,8,
|
|
|
|
14,13,12,
|
|
|
|
18,17,16,
|
|
|
|
22,21,20,
|
|
|
|
26,25,24,
|
|
|
|
30,29,28 };
|
|
|
|
|
|
|
|
static int chanmap_e1[] =
|
|
|
|
{ 2,1,0,
|
|
|
|
7,6,5,4,
|
|
|
|
11,10,9,8,
|
|
|
|
15,14,13,12,
|
|
|
|
19,18,17,16,
|
|
|
|
23,22,21,20,
|
|
|
|
27,26,25,24,
|
|
|
|
31,30,29,28 };
|
|
|
|
|
|
|
|
static int chanmap_e1uc[] =
|
|
|
|
{ 3,2,1,0,
|
|
|
|
7,6,5,4,
|
|
|
|
11,10,9,8,
|
|
|
|
15,14,13,12,
|
|
|
|
19,18,17,16,
|
|
|
|
23,22,21,20,
|
|
|
|
27,26,25,24,
|
|
|
|
31,30,29,28 };
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef FANCY_ALARM
|
|
|
|
static int altab[] = {
|
|
|
|
0, 0, 0, 1, 2, 3, 4, 6, 8, 9, 11, 13, 16, 18, 20, 22, 24, 25, 27, 28, 29, 30, 31, 31, 32, 31, 31, 30, 29, 28, 27, 25, 23, 22, 20, 18, 16, 13, 11, 9, 8, 6, 4, 3, 2, 1, 0, 0,
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
|
|
|
|
struct t1 {
|
|
|
|
struct pci_dev *dev;
|
|
|
|
spinlock_t lock;
|
|
|
|
int spantype;
|
|
|
|
int spanflags; /* Span flags */
|
|
|
|
unsigned char txsigs[16]; /* Copy of tx sig registers */
|
|
|
|
int num;
|
|
|
|
int alarmcount; /* How much red alarm we've seen */
|
|
|
|
int alarmdebounce;
|
|
|
|
/* Our offset for finding channel 1 */
|
|
|
|
int offset;
|
|
|
|
char *variety;
|
|
|
|
unsigned int intcount;
|
|
|
|
int usecount;
|
|
|
|
int clocktimeout;
|
|
|
|
int sync;
|
|
|
|
int dead;
|
|
|
|
int blinktimer;
|
|
|
|
int alarmtimer;
|
|
|
|
int checktiming; /* Set >0 to cause the timing source to be checked */
|
|
|
|
int loopupcnt;
|
|
|
|
int loopdowncnt;
|
|
|
|
int miss;
|
|
|
|
int misslast;
|
|
|
|
int *chanmap;
|
|
|
|
#ifdef FANCY_ALARM
|
|
|
|
int alarmpos;
|
|
|
|
#endif
|
|
|
|
unsigned char ledtestreg;
|
|
|
|
unsigned char outbyte;
|
|
|
|
unsigned long ioaddr;
|
|
|
|
unsigned short canary;
|
|
|
|
/* T1 signalling */
|
|
|
|
dma_addr_t readdma;
|
|
|
|
dma_addr_t writedma;
|
|
|
|
volatile unsigned char *writechunk; /* Double-word aligned write memory */
|
|
|
|
volatile unsigned char *readchunk; /* Double-word aligned read memory */
|
|
|
|
unsigned char ec_chunk1[32][DAHDI_CHUNKSIZE];
|
|
|
|
unsigned char ec_chunk2[32][DAHDI_CHUNKSIZE];
|
|
|
|
unsigned char tempo[33];
|
2011-10-27 02:58:14 +08:00
|
|
|
struct dahdi_device *ddev;
|
2010-08-28 05:59:27 +08:00
|
|
|
struct dahdi_span span; /* Span */
|
|
|
|
struct dahdi_chan *chans[32]; /* Channels */
|
|
|
|
};
|
|
|
|
|
|
|
|
#define CANARY 0xca1e
|
|
|
|
|
|
|
|
static int debug = 0; /* doesnt do anything */
|
|
|
|
static int j1mode = 0;
|
|
|
|
static int alarmdebounce = 0;
|
|
|
|
static int loopback = 0;
|
|
|
|
static int clockextra = 0;
|
|
|
|
static int t1e1override = -1;
|
|
|
|
static int unchannelized = 0;
|
|
|
|
|
|
|
|
static struct t1 *cards[WC_MAX_CARDS];
|
|
|
|
|
|
|
|
static inline void start_alarm(struct t1 *wc)
|
|
|
|
{
|
|
|
|
#ifdef FANCY_ALARM
|
|
|
|
wc->alarmpos = 0;
|
|
|
|
#endif
|
|
|
|
wc->blinktimer = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void stop_alarm(struct t1 *wc)
|
|
|
|
{
|
|
|
|
#ifdef FANCY_ALARM
|
|
|
|
wc->alarmpos = 0;
|
|
|
|
#endif
|
|
|
|
wc->blinktimer = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void __select_framer(struct t1 *wc, int reg)
|
|
|
|
{
|
|
|
|
/* Top four bits of address from AUX 6-3 */
|
|
|
|
wc->outbyte &= ~BIT_CS;
|
|
|
|
wc->outbyte &= ~BIT_ADDR;
|
|
|
|
wc->outbyte |= (reg & 0xf0) >> 1;
|
|
|
|
outb(wc->outbyte, wc->ioaddr + WC_AUXD);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void __select_control(struct t1 *wc)
|
|
|
|
{
|
|
|
|
if (!(wc->outbyte & BIT_CS)) {
|
|
|
|
wc->outbyte |= BIT_CS;
|
|
|
|
outb(wc->outbyte, wc->ioaddr + WC_AUXD);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int t1xxp_open(struct dahdi_chan *chan)
|
|
|
|
{
|
|
|
|
struct t1 *wc = chan->pvt;
|
|
|
|
if (wc->dead)
|
|
|
|
return -ENODEV;
|
|
|
|
wc->usecount++;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __control_set_reg(struct t1 *wc, int reg, unsigned char val)
|
|
|
|
{
|
|
|
|
__select_control(wc);
|
|
|
|
outb(val, wc->ioaddr + WC_USERREG + ((reg & 0xf) << 2));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int control_set_reg(struct t1 *wc, int reg, unsigned char val)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
int res;
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
res = __control_set_reg(wc, reg, val);
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __control_get_reg(struct t1 *wc, int reg)
|
|
|
|
{
|
|
|
|
unsigned char res;
|
|
|
|
/* The following makes UTTERLY no sense, but what was happening
|
|
|
|
was that reads in some cases were not actually happening
|
|
|
|
on the physical bus. Why, we dunno. But in debugging, we found
|
|
|
|
that writing before reading (in this case to an unused position)
|
|
|
|
seems to get rid of the problem */
|
|
|
|
__control_set_reg(wc,3,0x69); /* do magic here */
|
|
|
|
/* now get the read byte from the Xilinx part */
|
|
|
|
res = inb(wc->ioaddr + WC_USERREG + ((reg & 0xf) << 2));
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int control_get_reg(struct t1 *wc, int reg)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
int res;
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
res = __control_get_reg(wc, reg);
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int __t1_framer_in(struct t1 *wc, const unsigned int reg)
|
|
|
|
{
|
|
|
|
unsigned char res;
|
|
|
|
__select_framer(wc, reg);
|
|
|
|
/* Get value */
|
|
|
|
res = inb(wc->ioaddr + WC_USERREG + ((reg & 0xf) << 2));
|
|
|
|
return res;
|
|
|
|
#if 0
|
|
|
|
unsigned int ret;
|
|
|
|
__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff));
|
|
|
|
__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff) | ( 1 << 10) | WC_LREAD);
|
|
|
|
ret = __t1_pci_in(wc, WC_LDATA);
|
|
|
|
__t1_pci_out(wc, WC_LADDR, 0);
|
|
|
|
return ret & 0xff;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int t1_framer_in(struct t1 *wc, const unsigned int addr)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
unsigned int ret;
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
ret = __t1_framer_in(wc, addr);
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void __t1_framer_out(struct t1 *wc, const unsigned int reg, const unsigned int val)
|
|
|
|
{
|
|
|
|
if (debug > 1)
|
|
|
|
printk(KERN_DEBUG "Writing %02x to address %02x\n", val, reg);
|
|
|
|
__select_framer(wc, reg);
|
|
|
|
/* Send address */
|
|
|
|
outb(val, wc->ioaddr + WC_USERREG + ((reg & 0xf) << 2));
|
|
|
|
#if 0
|
|
|
|
__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff));
|
|
|
|
__t1_pci_out(wc, WC_LDATA, value);
|
|
|
|
__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff) | (1 << 10));
|
|
|
|
__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff) | (1 << 10) | WC_LWRITE);
|
|
|
|
__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff) | (1 << 10));
|
|
|
|
__t1_pci_out(wc, WC_LADDR, (unit << 8) | (addr & 0xff));
|
|
|
|
__t1_pci_out(wc, WC_LADDR, 0);
|
|
|
|
if (debug) printk(KERN_DEBUG "Write complete\n");
|
|
|
|
#endif
|
|
|
|
#if 0
|
|
|
|
{ unsigned int tmp;
|
|
|
|
tmp = t1_framer_in(wc, unit, addr);
|
|
|
|
if (tmp != value) {
|
|
|
|
printk(KERN_DEBUG "Expected %d from unit %d register %d but got %d instead\n", value, unit, addr, tmp);
|
|
|
|
} }
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void t1_framer_out(struct t1 *wc, const unsigned int addr, const unsigned int value)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
__t1_framer_out(wc, addr, value);
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1xxp_release(struct t1 *wc)
|
|
|
|
{
|
|
|
|
unsigned int x;
|
|
|
|
|
2011-10-27 02:58:14 +08:00
|
|
|
dahdi_unregister_device(wc->ddev);
|
2010-08-28 05:59:27 +08:00
|
|
|
for (x = 0; x < (wc->spantype == TYPE_E1 ? 31 : 24); x++) {
|
|
|
|
kfree(wc->chans[x]);
|
|
|
|
}
|
2011-10-27 02:58:14 +08:00
|
|
|
kfree(wc->ddev->location);
|
|
|
|
dahdi_free_device(wc->ddev);
|
2010-08-28 05:59:27 +08:00
|
|
|
kfree(wc);
|
|
|
|
printk(KERN_INFO "Freed a Wildcard\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
static int t1xxp_close(struct dahdi_chan *chan)
|
|
|
|
{
|
|
|
|
struct t1 *wc = chan->pvt;
|
|
|
|
|
|
|
|
wc->usecount--;
|
|
|
|
/* If we're dead, release us now */
|
|
|
|
if (!wc->usecount && wc->dead)
|
|
|
|
t1xxp_release(wc);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1xxp_enable_interrupts(struct t1 *wc)
|
|
|
|
{
|
|
|
|
/* Clear interrupts */
|
|
|
|
outb(0xff, wc->ioaddr + WC_INTSTAT);
|
|
|
|
/* Enable interrupts (we care about all of them) */
|
|
|
|
outb(0x3c /* 0x3f */, wc->ioaddr + WC_MASK0);
|
|
|
|
/* No external interrupts */
|
|
|
|
outb(0x00, wc->ioaddr + WC_MASK1);
|
|
|
|
if (debug) printk(KERN_DEBUG "Enabled interrupts!\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1xxp_start_dma(struct t1 *wc)
|
|
|
|
{
|
|
|
|
/* Reset Master and TDM */
|
|
|
|
outb(DELAY | 0x0f, wc->ioaddr + WC_CNTL);
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
schedule_timeout(1);
|
|
|
|
outb(DELAY | 0x01, wc->ioaddr + WC_CNTL);
|
|
|
|
outb(0x01, wc->ioaddr + WC_OPER);
|
|
|
|
if (debug) printk(KERN_DEBUG "Started DMA\n");
|
|
|
|
outb(0x03, wc->ioaddr + WC_OPER);
|
|
|
|
outb(0x01, wc->ioaddr + WC_OPER);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __t1xxp_stop_dma(struct t1 *wc)
|
|
|
|
{
|
|
|
|
outb(0x00, wc->ioaddr + WC_OPER);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __t1xxp_disable_interrupts(struct t1 *wc)
|
|
|
|
{
|
|
|
|
outb(0x00, wc->ioaddr + WC_MASK0);
|
|
|
|
outb(0x00, wc->ioaddr + WC_MASK1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __t1xxp_set_clear(struct t1 *wc)
|
|
|
|
{
|
|
|
|
int i,j;
|
|
|
|
unsigned short val=0;
|
|
|
|
for (i=0;i<24;i++) {
|
|
|
|
j = (i/8);
|
|
|
|
if (wc->span.chans[i]->flags & DAHDI_FLAG_CLEAR)
|
|
|
|
val |= 1 << (7 - (i % 8));
|
|
|
|
if ((i % 8)==7) {
|
|
|
|
if (debug > 1)
|
|
|
|
printk(KERN_DEBUG "Putting %d in register %02x\n",
|
|
|
|
val, 0x2f + j);
|
|
|
|
__t1_framer_out(wc, 0x2f + j, val);
|
|
|
|
val = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int t1xxp_ioctl(struct dahdi_chan *chan, unsigned int cmd, unsigned long data)
|
|
|
|
{
|
|
|
|
struct t4_regs regs;
|
|
|
|
int x;
|
|
|
|
struct t1 *wc;
|
|
|
|
switch(cmd) {
|
|
|
|
case WCT4_GET_REGS:
|
|
|
|
wc = chan->pvt;
|
|
|
|
for (x=0;x<NUM_PCI;x++)
|
|
|
|
#if 1
|
|
|
|
regs.pci[x] = (inb(wc->ioaddr + (x << 2))) |
|
|
|
|
(inb(wc->ioaddr + (x << 2) + 1) << 8) |
|
|
|
|
(inb(wc->ioaddr + (x << 2) + 2) << 16) |
|
|
|
|
(inb(wc->ioaddr + (x << 2) + 3) << 24);
|
|
|
|
#else
|
|
|
|
regs.pci[x] = (inb(wc->ioaddr + x));
|
|
|
|
#endif
|
|
|
|
|
|
|
|
for (x=0;x<NUM_REGS;x++)
|
|
|
|
regs.regs[x] = t1_framer_in(wc, x);
|
|
|
|
if (copy_to_user((__user void *)data, ®s, sizeof(regs)))
|
|
|
|
return -EFAULT;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -ENOTTY;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct t1 *t1_from_span(struct dahdi_span *span)
|
|
|
|
{
|
|
|
|
return container_of(span, struct t1, span);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int t1xxp_maint(struct dahdi_span *span, int cmd)
|
|
|
|
{
|
|
|
|
struct t1 *wc = t1_from_span(span);
|
|
|
|
|
|
|
|
if (wc->spantype == TYPE_E1) {
|
|
|
|
switch(cmd) {
|
|
|
|
case DAHDI_MAINT_NONE:
|
|
|
|
printk(KERN_INFO "XXX Turn off local and remote loops E1 XXX\n");
|
|
|
|
break;
|
|
|
|
case DAHDI_MAINT_LOCALLOOP:
|
|
|
|
printk(KERN_INFO "XXX Turn on local loopback E1 XXX\n");
|
|
|
|
break;
|
|
|
|
case DAHDI_MAINT_REMOTELOOP:
|
|
|
|
printk(KERN_INFO "XXX Turn on remote loopback E1 XXX\n");
|
|
|
|
break;
|
|
|
|
case DAHDI_MAINT_LOOPUP:
|
|
|
|
printk(KERN_INFO "XXX Send loopup code E1 XXX\n");
|
|
|
|
break;
|
|
|
|
case DAHDI_MAINT_LOOPDOWN:
|
|
|
|
printk(KERN_INFO "XXX Send loopdown code E1 XXX\n");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
printk(KERN_NOTICE "TE110P: Unknown E1 maint command: %d\n", cmd);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
switch(cmd) {
|
|
|
|
case DAHDI_MAINT_NONE:
|
|
|
|
printk(KERN_INFO "XXX Turn off local and remote loops T1 XXX\n");
|
2010-12-09 06:11:53 +08:00
|
|
|
t1_framer_out(wc, 0x21, 0x40);
|
2010-08-28 05:59:27 +08:00
|
|
|
break;
|
|
|
|
case DAHDI_MAINT_LOCALLOOP:
|
|
|
|
printk(KERN_INFO "XXX Turn on local loop and no remote loop XXX\n");
|
|
|
|
break;
|
|
|
|
case DAHDI_MAINT_REMOTELOOP:
|
|
|
|
printk(KERN_INFO "XXX Turn on remote loopup XXX\n");
|
|
|
|
break;
|
|
|
|
case DAHDI_MAINT_LOOPUP:
|
|
|
|
t1_framer_out(wc, 0x21, 0x50); /* FMR5: Nothing but RBS mode */
|
|
|
|
break;
|
|
|
|
case DAHDI_MAINT_LOOPDOWN:
|
|
|
|
t1_framer_out(wc, 0x21, 0x60); /* FMR5: Nothing but RBS mode */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
printk(KERN_NOTICE "TE110P: Unknown T1 maint command: %d\n", cmd);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int t1xxp_rbsbits(struct dahdi_chan *chan, int bits)
|
|
|
|
{
|
|
|
|
u_char m,c;
|
|
|
|
int n,b;
|
|
|
|
struct t1 *wc = chan->pvt;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if(debug > 1) printk(KERN_DEBUG "Setting bits to %d on channel %s\n", bits, chan->name);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
if (wc->spantype == TYPE_E1) { /* do it E1 way */
|
|
|
|
if (chan->chanpos == 16) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
n = chan->chanpos - 1;
|
|
|
|
if (chan->chanpos > 15) n--;
|
|
|
|
b = (n % 15);
|
|
|
|
c = wc->txsigs[b];
|
|
|
|
m = (n / 15) << 2; /* nibble selector */
|
|
|
|
c &= (0xf << m); /* keep the other nibble */
|
|
|
|
c |= (bits & 0xf) << (4 - m); /* put our new nibble here */
|
|
|
|
wc->txsigs[b] = c;
|
|
|
|
/* output them to the chip */
|
|
|
|
__t1_framer_out(wc,0x71 + b,c);
|
|
|
|
} else if (wc->span.lineconfig & DAHDI_CONFIG_D4) {
|
|
|
|
n = chan->chanpos - 1;
|
|
|
|
b = (n/4);
|
|
|
|
c = wc->txsigs[b];
|
|
|
|
m = ((3 - (n % 4)) << 1); /* nibble selector */
|
|
|
|
c &= ~(0x3 << m); /* keep the other nibble */
|
|
|
|
c |= ((bits >> 2) & 0x3) << m; /* put our new nibble here */
|
|
|
|
wc->txsigs[b] = c;
|
|
|
|
/* output them to the chip */
|
|
|
|
__t1_framer_out(wc,0x70 + b,c);
|
|
|
|
__t1_framer_out(wc,0x70 + b + 6,c);
|
|
|
|
} else if (wc->span.lineconfig & DAHDI_CONFIG_ESF) {
|
|
|
|
n = chan->chanpos - 1;
|
|
|
|
b = (n/2);
|
|
|
|
c = wc->txsigs[b];
|
|
|
|
m = ((n % 2) << 2); /* nibble selector */
|
|
|
|
c &= (0xf << m); /* keep the other nibble */
|
|
|
|
c |= (bits & 0xf) << (4 - m); /* put our new nibble here */
|
|
|
|
wc->txsigs[b] = c;
|
|
|
|
/* output them to the chip */
|
|
|
|
__t1_framer_out(wc,0x70 + b,c);
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
if (debug > 1)
|
|
|
|
printk(KERN_DEBUG "Finished setting RBS bits\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1_check_sigbits(struct t1 *wc)
|
|
|
|
{
|
|
|
|
int a,i,rxs;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if (!(wc->span.flags & DAHDI_FLAG_RUNNING))
|
|
|
|
return;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
|
|
|
|
if (wc->spantype == TYPE_E1) {
|
|
|
|
for (i = 0; i < 15; i++) {
|
|
|
|
a = __t1_framer_in(wc, 0x71 + i);
|
|
|
|
/* Get high channel in low bits */
|
|
|
|
rxs = (a & 0xf);
|
|
|
|
if (!(wc->span.chans[i+16]->sig & DAHDI_SIG_CLEAR)) {
|
|
|
|
if (wc->span.chans[i+16]->rxsig != rxs) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_rbsbits(wc->span.chans[i+16], rxs);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rxs = (a >> 4) & 0xf;
|
|
|
|
if (!(wc->span.chans[i]->sig & DAHDI_SIG_CLEAR)) {
|
|
|
|
if (wc->span.chans[i]->rxsig != rxs) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_rbsbits(wc->span.chans[i], rxs);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else if (wc->span.lineconfig & DAHDI_CONFIG_D4) {
|
|
|
|
for (i = 0; i < 24; i+=4) {
|
|
|
|
a = __t1_framer_in(wc, 0x70 + (i>>2));
|
|
|
|
/* Get high channel in low bits */
|
|
|
|
rxs = (a & 0x3) << 2;
|
|
|
|
if (!(wc->span.chans[i+3]->sig & DAHDI_SIG_CLEAR)) {
|
|
|
|
if (wc->span.chans[i+3]->rxsig != rxs) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_rbsbits(wc->span.chans[i+3], rxs);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rxs = (a & 0xc);
|
|
|
|
if (!(wc->span.chans[i+2]->sig & DAHDI_SIG_CLEAR)) {
|
|
|
|
if (wc->span.chans[i+2]->rxsig != rxs) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_rbsbits(wc->span.chans[i+2], rxs);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rxs = (a >> 2) & 0xc;
|
|
|
|
if (!(wc->span.chans[i+1]->sig & DAHDI_SIG_CLEAR)) {
|
|
|
|
if (wc->span.chans[i+1]->rxsig != rxs) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_rbsbits(wc->span.chans[i+1], rxs);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rxs = (a >> 4) & 0xc;
|
|
|
|
if (!(wc->span.chans[i]->sig & DAHDI_SIG_CLEAR)) {
|
|
|
|
if (wc->span.chans[i]->rxsig != rxs) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_rbsbits(wc->span.chans[i], rxs);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < 24; i+=2) {
|
|
|
|
a = __t1_framer_in(wc, 0x70 + (i>>1));
|
|
|
|
/* Get high channel in low bits */
|
|
|
|
rxs = (a & 0xf);
|
|
|
|
if (!(wc->span.chans[i+1]->sig & DAHDI_SIG_CLEAR)) {
|
|
|
|
if (wc->span.chans[i+1]->rxsig != rxs) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_rbsbits(wc->span.chans[i+1], rxs);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
rxs = (a >> 4) & 0xf;
|
|
|
|
if (!(wc->span.chans[i]->sig & DAHDI_SIG_CLEAR)) {
|
|
|
|
if (wc->span.chans[i]->rxsig != rxs) {
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_rbsbits(wc->span.chans[i], rxs);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t4_serial_setup(struct t1 *wc)
|
|
|
|
{
|
|
|
|
printk(KERN_INFO "TE110P: Setting up global serial parameters for %s %s\n",
|
|
|
|
wc->spantype == TYPE_E1 ? (unchannelized ? "Unchannelized E1" : "E1") : "T1",
|
|
|
|
wc->spanflags & FLAG_FALC12 ? "FALC V1.2" : "FALC V2.2");
|
|
|
|
t1_framer_out(wc, 0x85, 0xe0); /* GPC1: Multiplex mode enabled, FSC is output, active low, RCLK from channel 0 */
|
|
|
|
t1_framer_out(wc, 0x08, 0x05); /* IPC: Interrupt push/pull active low */
|
|
|
|
if (wc->spanflags & FLAG_FALC12) {
|
|
|
|
t1_framer_out(wc, 0x92, 0x00);
|
|
|
|
t1_framer_out(wc, 0x93, 0x58);
|
|
|
|
t1_framer_out(wc, 0x94, 0xd2);
|
|
|
|
t1_framer_out(wc, 0x95, 0xc2);
|
|
|
|
t1_framer_out(wc, 0x96, 0x03);
|
|
|
|
t1_framer_out(wc, 0x97, 0x10);
|
|
|
|
} else {
|
|
|
|
/* Global clocks (8.192 Mhz CLK) */
|
|
|
|
t1_framer_out(wc, 0x92, 0x00);
|
|
|
|
t1_framer_out(wc, 0x93, 0x18);
|
|
|
|
t1_framer_out(wc, 0x94, 0xfb);
|
|
|
|
t1_framer_out(wc, 0x95, 0x0b);
|
|
|
|
t1_framer_out(wc, 0x96, 0x00);
|
|
|
|
t1_framer_out(wc, 0x97, 0x0b);
|
|
|
|
t1_framer_out(wc, 0x98, 0xdb);
|
|
|
|
t1_framer_out(wc, 0x99, 0xdf);
|
|
|
|
}
|
|
|
|
/* Configure interrupts */
|
|
|
|
t1_framer_out(wc, 0x46, 0x40); /* GCR: Interrupt on Activation/Deactivation of AIX, LOS */
|
|
|
|
|
|
|
|
/* Configure system interface */
|
|
|
|
t1_framer_out(wc, 0x3e, 0x02); /* SIC1: 4.096 Mhz clock/bus, double buffer receive / transmit, byte interleaved */
|
|
|
|
t1_framer_out(wc, 0x3f, 0x00); /* SIC2: No FFS, no center receive eliastic buffer, phase 0 */
|
|
|
|
t1_framer_out(wc, 0x40, 0x04); /* SIC3: Edges for capture */
|
|
|
|
t1_framer_out(wc, 0x44, 0x30); /* CMR1: RCLK is at 8.192 Mhz dejittered */
|
|
|
|
t1_framer_out(wc, 0x45, 0x00); /* CMR2: We provide sync and clock for tx and rx. */
|
|
|
|
t1_framer_out(wc, 0x22, 0x00); /* XC0: Normal operation of Sa-bits */
|
|
|
|
t1_framer_out(wc, 0x23, 0x04); /* XC1: 0 offset */
|
|
|
|
t1_framer_out(wc, 0x24, 0x07); /* RC0: Just shy of 255 */
|
|
|
|
if (wc->spanflags & FLAG_FALC12)
|
|
|
|
t1_framer_out(wc, 0x25, 0x04); /* RC1: The rest of RC0 */
|
|
|
|
else
|
|
|
|
t1_framer_out(wc, 0x25, 0x05); /* RC1: The rest of RC0 */
|
|
|
|
|
|
|
|
/* Configure ports */
|
|
|
|
t1_framer_out(wc, 0x80, 0x00); /* PC1: SPYR/SPYX input on RPA/XPA */
|
|
|
|
t1_framer_out(wc, 0x81, 0x22); /* PC2: RMFB/XSIG output/input on RPB/XPB */
|
|
|
|
t1_framer_out(wc, 0x82, 0x65); /* PC3: Some unused stuff */
|
|
|
|
t1_framer_out(wc, 0x83, 0x35); /* PC4: Some more unused stuff */
|
|
|
|
t1_framer_out(wc, 0x84, 0x31); /* PC5: XMFS active low, SCLKR is input, RCLK is output */
|
|
|
|
t1_framer_out(wc, 0x86, 0x03); /* PC6: CLK1 is Tx Clock output, CLK2 is 8.192 Mhz from DCO-R */
|
|
|
|
t1_framer_out(wc, 0x3b, 0x00); /* Clear LCR1 */
|
|
|
|
printk(KERN_INFO "TE110P: Successfully initialized serial bus for card\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __t1_configure_t1(struct t1 *wc, int lineconfig, int txlevel)
|
|
|
|
{
|
|
|
|
unsigned int fmr4, fmr2, fmr1, fmr0, lim2;
|
|
|
|
char *framing, *line;
|
|
|
|
int mytxlevel;
|
|
|
|
if ((txlevel > 7) || (txlevel < 4))
|
|
|
|
mytxlevel = 0;
|
|
|
|
else
|
|
|
|
mytxlevel = txlevel - 4;
|
|
|
|
fmr1 = 0x1c; /* FMR1: Mode 0, T1 mode, CRC on for ESF, 2.048 Mhz system data rate, no XAIS */
|
|
|
|
fmr2 = 0x22; /* FMR2: no payload loopback, auto send yellow alarm */
|
|
|
|
if (loopback)
|
|
|
|
fmr2 |= 0x4;
|
|
|
|
|
|
|
|
if (j1mode)
|
|
|
|
fmr4 = 0x1c;
|
|
|
|
else
|
|
|
|
fmr4 = 0x0c; /* FMR4: Lose sync on 2 out of 5 framing bits, auto resync */
|
|
|
|
|
|
|
|
|
|
|
|
lim2 = 0x21; /* LIM2: 50% peak is a "1", Advanced Loss recovery */
|
|
|
|
lim2 |= (mytxlevel << 6); /* LIM2: Add line buildout */
|
|
|
|
__t1_framer_out(wc, 0x1d, fmr1);
|
|
|
|
__t1_framer_out(wc, 0x1e, fmr2);
|
|
|
|
|
|
|
|
/* Configure line interface */
|
|
|
|
if (lineconfig & DAHDI_CONFIG_AMI) {
|
|
|
|
line = "AMI";
|
|
|
|
fmr0 = 0xa0;
|
|
|
|
} else {
|
|
|
|
line = "B8ZS";
|
|
|
|
fmr0 = 0xf0;
|
|
|
|
}
|
|
|
|
if (lineconfig & DAHDI_CONFIG_D4) {
|
|
|
|
framing = "D4";
|
|
|
|
} else {
|
|
|
|
framing = "ESF";
|
|
|
|
fmr4 |= 0x2;
|
|
|
|
fmr2 |= 0xc0;
|
|
|
|
}
|
|
|
|
__t1_framer_out(wc, 0x1c, fmr0);
|
|
|
|
|
|
|
|
__t1_framer_out(wc, 0x20, fmr4);
|
|
|
|
__t1_framer_out(wc, 0x21, 0x40); /* FMR5: Enable RBS mode */
|
|
|
|
|
|
|
|
__t1_framer_out(wc, 0x37, 0xf8); /* LIM1: Clear data in case of LOS, Set receiver threshold (0.5V), No remote loop, no DRS */
|
|
|
|
__t1_framer_out(wc, 0x36, 0x08); /* LIM0: Enable auto long haul mode, no local loop (must be after LIM1) */
|
|
|
|
|
|
|
|
__t1_framer_out(wc, 0x02, 0x50); /* CMDR: Reset the receiver and transmitter line interface */
|
|
|
|
__t1_framer_out(wc, 0x02, 0x00); /* CMDR: Reset the receiver and transmitter line interface */
|
|
|
|
|
|
|
|
__t1_framer_out(wc, 0x3a, lim2); /* LIM2: 50% peak amplitude is a "1" */
|
|
|
|
__t1_framer_out(wc, 0x38, 0x0a); /* PCD: LOS after 176 consecutive "zeros" */
|
|
|
|
__t1_framer_out(wc, 0x39, 0x15); /* PCR: 22 "ones" clear LOS */
|
|
|
|
|
|
|
|
if (j1mode)
|
|
|
|
__t1_framer_out(wc, 0x24, 0x80); /* J1 overide */
|
|
|
|
|
|
|
|
/* Generate pulse mask for T1 */
|
|
|
|
switch(mytxlevel) {
|
|
|
|
case 3:
|
|
|
|
__t1_framer_out(wc, 0x26, 0x07); /* XPM0 */
|
|
|
|
__t1_framer_out(wc, 0x27, 0x01); /* XPM1 */
|
|
|
|
__t1_framer_out(wc, 0x28, 0x00); /* XPM2 */
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
__t1_framer_out(wc, 0x26, 0x8c); /* XPM0 */
|
|
|
|
__t1_framer_out(wc, 0x27, 0x11); /* XPM1 */
|
|
|
|
__t1_framer_out(wc, 0x28, 0x01); /* XPM2 */
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
__t1_framer_out(wc, 0x26, 0x8c); /* XPM0 */
|
|
|
|
__t1_framer_out(wc, 0x27, 0x01); /* XPM1 */
|
|
|
|
__t1_framer_out(wc, 0x28, 0x00); /* XPM2 */
|
|
|
|
break;
|
|
|
|
case 0:
|
|
|
|
default:
|
|
|
|
__t1_framer_out(wc, 0x26, 0xd7); /* XPM0 */
|
|
|
|
__t1_framer_out(wc, 0x27, 0x22); /* XPM1 */
|
|
|
|
__t1_framer_out(wc, 0x28, 0x01); /* XPM2 */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
printk(KERN_INFO "TE110P: Span configured for %s/%s\n", framing, line);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __t1_configure_e1(struct t1 *wc, int lineconfig)
|
|
|
|
{
|
|
|
|
unsigned int fmr2, fmr1, fmr0;
|
|
|
|
unsigned int cas = 0;
|
|
|
|
char *crc4 = "";
|
|
|
|
char *framing, *line;
|
|
|
|
fmr1 = 0x44; /* FMR1: E1 mode, Automatic force resync, PCM30 mode, 8.192 Mhz backplane, no XAIS */
|
|
|
|
fmr2 = 0x03; /* FMR2: Auto transmit remote alarm, auto loss of multiframe recovery, no payload loopback */
|
|
|
|
if (unchannelized)
|
|
|
|
fmr2 |= 0x30;
|
|
|
|
if (loopback)
|
|
|
|
fmr2 |= 0x4;
|
|
|
|
if (lineconfig & DAHDI_CONFIG_CRC4) {
|
|
|
|
fmr1 |= 0x08; /* CRC4 transmit */
|
|
|
|
fmr2 |= 0xc0; /* CRC4 receive */
|
|
|
|
crc4 = "/CRC4";
|
|
|
|
}
|
|
|
|
__t1_framer_out(wc, 0x1d, fmr1);
|
|
|
|
__t1_framer_out(wc, 0x1e, fmr2);
|
|
|
|
|
|
|
|
/* Configure line interface */
|
|
|
|
if (lineconfig & DAHDI_CONFIG_AMI) {
|
|
|
|
line = "AMI";
|
|
|
|
fmr0 = 0xa0;
|
|
|
|
} else {
|
|
|
|
line = "HDB3";
|
|
|
|
fmr0 = 0xf0;
|
|
|
|
}
|
|
|
|
if (lineconfig & DAHDI_CONFIG_CCS) {
|
|
|
|
framing = "CCS";
|
|
|
|
} else {
|
|
|
|
framing = "CAS";
|
|
|
|
cas = 0x40;
|
|
|
|
}
|
|
|
|
__t1_framer_out(wc, 0x1c, fmr0);
|
|
|
|
|
|
|
|
if (unchannelized)
|
|
|
|
__t1_framer_out(wc, 0x1f, 0x40);
|
|
|
|
|
|
|
|
__t1_framer_out(wc, 0x37, 0xf0 /*| 0x6 */ ); /* LIM1: Clear data in case of LOS, Set receiver threshold (0.5V), No remote loop, no DRS */
|
|
|
|
__t1_framer_out(wc, 0x36, 0x08); /* LIM0: Enable auto long haul mode, no local loop (must be after LIM1) */
|
|
|
|
|
|
|
|
__t1_framer_out(wc, 0x02, 0x50); /* CMDR: Reset the receiver and transmitter line interface */
|
|
|
|
__t1_framer_out(wc, 0x02, 0x00); /* CMDR: Reset the receiver and transmitter line interface */
|
|
|
|
|
|
|
|
/* Condition receive line interface for E1 after reset */
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x17);
|
|
|
|
__t1_framer_out(wc, 0xbc, 0x55);
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x97);
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x11);
|
|
|
|
__t1_framer_out(wc, 0xbc, 0xaa);
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x91);
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x12);
|
|
|
|
__t1_framer_out(wc, 0xbc, 0x55);
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x92);
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x0c);
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x00);
|
|
|
|
__t1_framer_out(wc, 0xbb, 0x8c);
|
|
|
|
|
|
|
|
__t1_framer_out(wc, 0x3a, 0x20); /* LIM2: 50% peak amplitude is a "1" */
|
|
|
|
__t1_framer_out(wc, 0x38, 0x0a); /* PCD: LOS after 176 consecutive "zeros" */
|
|
|
|
__t1_framer_out(wc, 0x39, 0x15); /* PCR: 22 "ones" clear LOS */
|
|
|
|
|
|
|
|
__t1_framer_out(wc, 0x20, 0x9f); /* XSW: Spare bits all to 1 */
|
|
|
|
if (unchannelized)
|
|
|
|
__t1_framer_out(wc, 0x21, 0x3c);
|
|
|
|
else
|
|
|
|
__t1_framer_out(wc, 0x21, 0x1c|cas); /* XSP: E-bit set when async. AXS auto, XSIF to 1 */
|
|
|
|
|
|
|
|
|
|
|
|
/* Generate pulse mask for E1 */
|
|
|
|
__t1_framer_out(wc, 0x26, 0x54); /* XPM0 */
|
|
|
|
__t1_framer_out(wc, 0x27, 0x02); /* XPM1 */
|
|
|
|
__t1_framer_out(wc, 0x28, 0x00); /* XPM2 */
|
|
|
|
printk(KERN_INFO "TE110P: Span configured for %s/%s%s\n", framing, line, crc4);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1xxp_framer_start(struct t1 *wc, struct dahdi_span *span)
|
|
|
|
{
|
|
|
|
int alreadyrunning = wc->span.flags & DAHDI_FLAG_RUNNING;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
|
|
|
|
if (wc->spantype == TYPE_E1) { /* if this is an E1 card */
|
|
|
|
__t1_configure_e1(wc, span->lineconfig);
|
|
|
|
} else { /* is a T1 card */
|
|
|
|
__t1_configure_t1(wc, span->lineconfig, span->txlevel);
|
|
|
|
__t1xxp_set_clear(wc);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!alreadyrunning)
|
|
|
|
wc->span.flags |= DAHDI_FLAG_RUNNING;
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2011-06-03 04:01:34 +08:00
|
|
|
static int t1xxp_startup(struct file *file, struct dahdi_span *span)
|
2010-08-28 05:59:27 +08:00
|
|
|
{
|
|
|
|
struct t1 *wc = t1_from_span(span);
|
|
|
|
|
|
|
|
int i,alreadyrunning = span->flags & DAHDI_FLAG_RUNNING;
|
|
|
|
|
|
|
|
/* initialize the start value for the entire chunk of last ec buffer */
|
|
|
|
for(i = 0; i < span->channels; i++)
|
|
|
|
{
|
|
|
|
memset(wc->ec_chunk1[i],
|
|
|
|
DAHDI_LIN2X(0,span->chans[i]),DAHDI_CHUNKSIZE);
|
|
|
|
memset(wc->ec_chunk2[i],
|
|
|
|
DAHDI_LIN2X(0,span->chans[i]),DAHDI_CHUNKSIZE);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset framer with proper parameters and start */
|
|
|
|
t1xxp_framer_start(wc, span);
|
|
|
|
printk(KERN_INFO "Calling startup (flags is %lu)\n", span->flags);
|
|
|
|
|
|
|
|
if (!alreadyrunning) {
|
|
|
|
/* Only if we're not already going */
|
|
|
|
t1xxp_enable_interrupts(wc);
|
|
|
|
t1xxp_start_dma(wc);
|
|
|
|
span->flags |= DAHDI_FLAG_RUNNING;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int t1xxp_shutdown(struct dahdi_span *span)
|
|
|
|
{
|
|
|
|
struct t1 *wc = t1_from_span(span);
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
__t1xxp_stop_dma(wc);
|
|
|
|
__t1xxp_disable_interrupts(wc);
|
|
|
|
span->flags &= ~DAHDI_FLAG_RUNNING;
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2011-06-03 04:01:34 +08:00
|
|
|
static int
|
|
|
|
t1xxp_chanconfig(struct file *file, struct dahdi_chan *chan, int sigtype)
|
2010-08-28 05:59:27 +08:00
|
|
|
{
|
|
|
|
struct t1 *wc = chan->pvt;
|
|
|
|
unsigned long flags;
|
|
|
|
int alreadyrunning = chan->span->flags & DAHDI_FLAG_RUNNING;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
|
|
|
|
if (alreadyrunning && (wc->spantype != TYPE_E1))
|
|
|
|
__t1xxp_set_clear(wc);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2011-06-03 04:01:34 +08:00
|
|
|
static int
|
|
|
|
t1xxp_spanconfig(struct file *file, struct dahdi_span *span,
|
|
|
|
struct dahdi_lineconfig *lc)
|
2010-08-28 05:59:27 +08:00
|
|
|
{
|
|
|
|
struct t1 *wc = t1_from_span(span);
|
|
|
|
|
|
|
|
/* Do we want to SYNC on receive or not */
|
|
|
|
wc->sync = (lc->sync) ? 1 : 0;
|
|
|
|
/* If already running, apply changes immediately */
|
|
|
|
if (span->flags & DAHDI_FLAG_RUNNING)
|
2011-06-03 04:01:34 +08:00
|
|
|
return t1xxp_startup(file, span);
|
2010-08-28 05:59:27 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct dahdi_span_ops t1xxp_span_ops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.startup = t1xxp_startup,
|
|
|
|
.shutdown = t1xxp_shutdown,
|
|
|
|
.rbsbits = t1xxp_rbsbits,
|
|
|
|
.maint = t1xxp_maint,
|
|
|
|
.open = t1xxp_open,
|
|
|
|
.close = t1xxp_close,
|
|
|
|
.spanconfig = t1xxp_spanconfig,
|
|
|
|
.chanconfig = t1xxp_chanconfig,
|
|
|
|
.ioctl = t1xxp_ioctl,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int t1xxp_software_init(struct t1 *wc)
|
|
|
|
{
|
|
|
|
int x;
|
|
|
|
/* Find position */
|
|
|
|
for (x=0;x<WC_MAX_CARDS;x++) {
|
|
|
|
if (!cards[x]) {
|
|
|
|
cards[x] = wc;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (x >= WC_MAX_CARDS)
|
|
|
|
return -1;
|
2011-10-27 02:58:14 +08:00
|
|
|
|
|
|
|
wc->ddev = dahdi_create_device();
|
|
|
|
|
2010-08-28 05:59:27 +08:00
|
|
|
t4_serial_setup(wc);
|
|
|
|
wc->num = x;
|
|
|
|
sprintf(wc->span.name, "WCT1/%d", wc->num);
|
|
|
|
snprintf(wc->span.desc, sizeof(wc->span.desc) - 1, "%s Card %d", wc->variety, wc->num);
|
2011-10-27 02:58:14 +08:00
|
|
|
wc->ddev->manufacturer = "Digium";
|
|
|
|
wc->ddev->devicetype = wc->variety;
|
|
|
|
wc->ddev->location = kasprintf(GFP_KERNEL, "PCI Bus %02d Slot %02d",
|
|
|
|
wc->dev->bus->number,
|
|
|
|
PCI_SLOT(wc->dev->devfn) + 1);
|
|
|
|
if (!wc->ddev->location)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2010-08-28 05:59:27 +08:00
|
|
|
if (wc->spantype == TYPE_E1) {
|
|
|
|
if (unchannelized)
|
|
|
|
wc->span.channels = 32;
|
|
|
|
else
|
|
|
|
wc->span.channels = 31;
|
|
|
|
wc->span.deflaw = DAHDI_LAW_ALAW;
|
2012-05-23 20:20:23 +08:00
|
|
|
wc->span.spantype = SPANTYPE_DIGITAL_E1;
|
2010-08-28 05:59:27 +08:00
|
|
|
wc->span.linecompat = DAHDI_CONFIG_HDB3 | DAHDI_CONFIG_CCS | DAHDI_CONFIG_CRC4;
|
|
|
|
} else {
|
|
|
|
wc->span.channels = 24;
|
|
|
|
wc->span.deflaw = DAHDI_LAW_MULAW;
|
2012-05-23 20:20:23 +08:00
|
|
|
wc->span.spantype = SPANTYPE_DIGITAL_T1;
|
2010-08-28 05:59:27 +08:00
|
|
|
wc->span.linecompat = DAHDI_CONFIG_AMI | DAHDI_CONFIG_B8ZS | DAHDI_CONFIG_D4 | DAHDI_CONFIG_ESF;
|
|
|
|
}
|
|
|
|
wc->span.chans = wc->chans;
|
|
|
|
wc->span.flags = DAHDI_FLAG_RBS;
|
|
|
|
for (x=0;x<wc->span.channels;x++) {
|
|
|
|
sprintf(wc->chans[x]->name, "WCT1/%d/%d", wc->num, x + 1);
|
|
|
|
wc->chans[x]->sigcap = DAHDI_SIG_EM | DAHDI_SIG_CLEAR | DAHDI_SIG_EM_E1 |
|
|
|
|
DAHDI_SIG_FXSLS | DAHDI_SIG_FXSGS | DAHDI_SIG_MTP2 |
|
|
|
|
DAHDI_SIG_FXSKS | DAHDI_SIG_FXOLS | DAHDI_SIG_DACS_RBS |
|
|
|
|
DAHDI_SIG_FXOGS | DAHDI_SIG_FXOKS | DAHDI_SIG_CAS | DAHDI_SIG_SF;
|
|
|
|
wc->chans[x]->pvt = wc;
|
|
|
|
wc->chans[x]->chanpos = x + 1;
|
|
|
|
}
|
|
|
|
wc->span.ops = &t1xxp_span_ops;
|
2011-10-27 02:58:14 +08:00
|
|
|
list_add_tail(&wc->span.device_node, &wc->ddev->spans);
|
|
|
|
if (dahdi_register_device(wc->ddev, &wc->dev->dev)) {
|
2010-08-28 05:59:27 +08:00
|
|
|
printk(KERN_NOTICE "Unable to register span with DAHDI\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void __handle_leds(struct t1 *wc)
|
|
|
|
{
|
|
|
|
int oldreg;
|
|
|
|
|
|
|
|
if (wc->span.alarms & (DAHDI_ALARM_RED | DAHDI_ALARM_BLUE)) {
|
|
|
|
/* Red/Blue alarm */
|
|
|
|
wc->blinktimer++;
|
|
|
|
#ifdef FANCY_ALARM
|
|
|
|
if (wc->blinktimer == (altab[wc->alarmpos] >> 1)) {
|
|
|
|
wc->ledtestreg = (wc->ledtestreg | BIT_LED1) & ~BIT_LED0;
|
|
|
|
__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
|
|
|
|
}
|
|
|
|
if (wc->blinktimer >= 0xf) {
|
|
|
|
wc->ledtestreg = wc->ledtestreg & ~(BIT_LED0 | BIT_LED1);
|
|
|
|
__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
|
|
|
|
wc->blinktimer = -1;
|
|
|
|
wc->alarmpos++;
|
|
|
|
if (wc->alarmpos >= (sizeof(altab) / sizeof(altab[0])))
|
|
|
|
wc->alarmpos = 0;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
if (wc->blinktimer == 160) {
|
|
|
|
wc->ledtestreg = (wc->ledtestreg | BIT_LED1) & ~BIT_LED0;
|
|
|
|
__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
|
|
|
|
} else if (wc->blinktimer == 480) {
|
|
|
|
wc->ledtestreg = wc->ledtestreg & ~(BIT_LED0 | BIT_LED1);
|
|
|
|
__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
|
|
|
|
wc->blinktimer = 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
} else if (wc->span.alarms & DAHDI_ALARM_YELLOW) {
|
|
|
|
/* Yellow Alarm */
|
|
|
|
if (!(wc->blinktimer % 2))
|
|
|
|
wc->ledtestreg = (wc->ledtestreg | BIT_LED1) & ~BIT_LED0;
|
|
|
|
else
|
|
|
|
wc->ledtestreg = (wc->ledtestreg | BIT_LED0) & ~BIT_LED1;
|
|
|
|
__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
|
|
|
|
} else {
|
|
|
|
/* No Alarm */
|
|
|
|
oldreg = wc->ledtestreg;
|
|
|
|
if (wc->span.maintstat != DAHDI_MAINT_NONE)
|
|
|
|
wc->ledtestreg |= BIT_TEST;
|
|
|
|
else
|
|
|
|
wc->ledtestreg &= ~BIT_TEST;
|
|
|
|
if (wc->span.flags & DAHDI_FLAG_RUNNING)
|
|
|
|
wc->ledtestreg = (wc->ledtestreg | BIT_LED0) & ~BIT_LED1;
|
|
|
|
else
|
|
|
|
wc->ledtestreg = wc->ledtestreg & ~(BIT_LED0 | BIT_LED1);
|
|
|
|
if (oldreg != wc->ledtestreg)
|
|
|
|
__control_set_reg(wc, WC_LEDTEST, wc->ledtestreg);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1xxp_transmitprep(struct t1 *wc, int ints)
|
|
|
|
{
|
|
|
|
volatile unsigned char *txbuf;
|
|
|
|
int x,y;
|
|
|
|
int pos;
|
|
|
|
if (ints & 0x04 /* 0x01 */) {
|
|
|
|
/* We just finished sending the first buffer, start filling it
|
|
|
|
now */
|
|
|
|
txbuf = wc->writechunk;
|
|
|
|
} else {
|
|
|
|
/* Just finished sending second buffer, fill it now */
|
|
|
|
txbuf = wc->writechunk + 32 * DAHDI_CHUNKSIZE;
|
|
|
|
}
|
|
|
|
dahdi_transmit(&wc->span);
|
|
|
|
for (x=0;x<wc->offset;x++)
|
|
|
|
txbuf[x] = wc->tempo[x];
|
|
|
|
for (y=0;y<DAHDI_CHUNKSIZE;y++) {
|
|
|
|
for (x=0;x<wc->span.channels;x++) {
|
|
|
|
pos = y * 32 + wc->chanmap[x] + wc->offset;
|
|
|
|
/* Put channel number as outgoing data */
|
|
|
|
if (pos < 32 * DAHDI_CHUNKSIZE)
|
|
|
|
txbuf[pos] = wc->chans[x]->writechunk[y];
|
|
|
|
else
|
|
|
|
wc->tempo[pos - 32 * DAHDI_CHUNKSIZE] = wc->chans[x]->writechunk[y];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1xxp_receiveprep(struct t1 *wc, int ints)
|
|
|
|
{
|
|
|
|
volatile unsigned char *rxbuf;
|
|
|
|
volatile unsigned int *canary;
|
|
|
|
int x;
|
|
|
|
int y;
|
|
|
|
unsigned int oldcan;
|
|
|
|
if (ints & 0x04) {
|
|
|
|
/* Just received first buffer */
|
|
|
|
rxbuf = wc->readchunk;
|
|
|
|
canary = (unsigned int *)(wc->readchunk + DAHDI_CHUNKSIZE * 64 - 4);
|
|
|
|
} else {
|
|
|
|
rxbuf = wc->readchunk + DAHDI_CHUNKSIZE * 32;
|
|
|
|
canary = (unsigned int *)(wc->readchunk + DAHDI_CHUNKSIZE * 32 - 4);
|
|
|
|
}
|
|
|
|
oldcan = *canary;
|
|
|
|
if (((oldcan & 0xffff0000) >> 16) != CANARY) {
|
|
|
|
/* Check top part */
|
|
|
|
if (debug) printk(KERN_DEBUG "Expecting top %04x, got %04x\n", CANARY, (oldcan & 0xffff0000) >> 16);
|
2011-10-27 03:00:28 +08:00
|
|
|
wc->ddev->irqmisses++;
|
2010-08-28 05:59:27 +08:00
|
|
|
} else if ((oldcan & 0xffff) != ((wc->canary - 1) & 0xffff)) {
|
|
|
|
if (debug) printk(KERN_DEBUG "Expecting bottom %d, got %d\n", wc->canary - 1, oldcan & 0xffff);
|
2011-10-27 03:00:28 +08:00
|
|
|
wc->ddev->irqmisses++;
|
2010-08-28 05:59:27 +08:00
|
|
|
}
|
|
|
|
for (y=0;y<DAHDI_CHUNKSIZE;y++) {
|
|
|
|
for (x=0;x<wc->span.channels;x++) {
|
|
|
|
/* XXX Optimize, remove * and + XXX */
|
|
|
|
/* Must map received channels into appropriate data */
|
|
|
|
wc->chans[x]->readchunk[y] =
|
|
|
|
rxbuf[32 * y + ((wc->chanmap[x] + WC_OFFSET + wc->offset) & 0x1f)];
|
|
|
|
}
|
|
|
|
if (wc->spantype != TYPE_E1) {
|
|
|
|
for (x=3;x<32;x+=4) {
|
|
|
|
if (rxbuf[32 * y + ((x + WC_OFFSET) & 0x1f)] == 0x7f) {
|
|
|
|
if (wc->offset != (x-3)) {
|
|
|
|
/* Resync */
|
|
|
|
control_set_reg(wc, WC_CLOCK, 0x06 | wc->sync | clockextra);
|
|
|
|
wc->clocktimeout = 100;
|
|
|
|
#if 1
|
|
|
|
if (debug) printk(KERN_DEBUG "T1: Lost our place, resyncing\n");
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else if (!unchannelized) {
|
|
|
|
if (!wc->clocktimeout && !wc->span.alarms) {
|
|
|
|
if ((rxbuf[32 * y + ((3 + WC_OFFSET + wc->offset) & 0x1f)] & 0x7f) != 0x1b) {
|
|
|
|
if (wc->miss) {
|
|
|
|
if (debug) printk(KERN_DEBUG "Double miss (%d, %d)...\n", wc->misslast, rxbuf[32 * y + ((3 + WC_OFFSET + wc->offset) & 0x1f)]);
|
|
|
|
control_set_reg(wc, WC_CLOCK, 0x06 | wc->sync | clockextra);
|
|
|
|
wc->clocktimeout = 100;
|
|
|
|
} else {
|
|
|
|
wc->miss = 1;
|
|
|
|
wc->misslast = rxbuf[32 * y + ((3 + WC_OFFSET + wc->offset) & 0x1f)];
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
wc->miss = 0;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
wc->miss = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Store the next canary */
|
|
|
|
canary = (unsigned int *)(rxbuf + DAHDI_CHUNKSIZE * 32 - 4);
|
|
|
|
*canary = (wc->canary++) | (CANARY << 16);
|
|
|
|
for (x=0;x<wc->span.channels;x++) {
|
|
|
|
dahdi_ec_chunk(wc->chans[x], wc->chans[x]->readchunk, wc->ec_chunk2[x]);
|
|
|
|
memcpy(wc->ec_chunk2[x],wc->ec_chunk1[x],DAHDI_CHUNKSIZE);
|
|
|
|
memcpy(wc->ec_chunk1[x],wc->chans[x]->writechunk,DAHDI_CHUNKSIZE);
|
|
|
|
}
|
|
|
|
dahdi_receive(&wc->span);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1_check_alarms(struct t1 *wc)
|
|
|
|
{
|
|
|
|
unsigned char c,d;
|
|
|
|
int alarms;
|
|
|
|
int x,j;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
if (!(wc->span.flags & DAHDI_FLAG_RUNNING))
|
|
|
|
return;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
|
|
|
|
c = __t1_framer_in(wc, 0x4c);
|
|
|
|
if (wc->spanflags & FLAG_FALC12)
|
|
|
|
d = __t1_framer_in(wc, 0x4f);
|
|
|
|
else
|
|
|
|
d = __t1_framer_in(wc, 0x4d);
|
|
|
|
|
|
|
|
/* Assume no alarms */
|
|
|
|
alarms = 0;
|
|
|
|
|
|
|
|
/* And consider only carrier alarms */
|
|
|
|
wc->span.alarms &= (DAHDI_ALARM_RED | DAHDI_ALARM_BLUE | DAHDI_ALARM_NOTOPEN);
|
|
|
|
|
|
|
|
if (wc->spantype == TYPE_E1) {
|
|
|
|
if (c & 0x04) {
|
|
|
|
/* No multiframe found, force RAI high after 400ms only if
|
|
|
|
we haven't found a multiframe since last loss
|
|
|
|
of frame */
|
|
|
|
if (!(wc->spanflags & FLAG_NMF)) {
|
|
|
|
__t1_framer_out(wc, 0x20, 0x9f | 0x20); /* LIM0: Force RAI High */
|
|
|
|
wc->spanflags |= FLAG_NMF;
|
|
|
|
printk(KERN_DEBUG "NMF workaround on!\n");
|
|
|
|
}
|
|
|
|
__t1_framer_out(wc, 0x1e, 0xc3); /* Reset to CRC4 mode */
|
|
|
|
__t1_framer_out(wc, 0x1c, 0xf2); /* Force Resync */
|
|
|
|
__t1_framer_out(wc, 0x1c, 0xf0); /* Force Resync */
|
|
|
|
} else if (!(c & 0x02)) {
|
|
|
|
if ((wc->spanflags & FLAG_NMF)) {
|
|
|
|
__t1_framer_out(wc, 0x20, 0x9f); /* LIM0: Clear forced RAI */
|
|
|
|
wc->spanflags &= ~FLAG_NMF;
|
|
|
|
printk(KERN_DEBUG "NMF workaround off!\n");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* Detect loopup code if we're not sending one */
|
|
|
|
if ((!wc->span.mainttimer) && (d & 0x08)) {
|
|
|
|
/* Loop-up code detected */
|
|
|
|
if ((wc->loopupcnt++ > 80) && (wc->span.maintstat != DAHDI_MAINT_REMOTELOOP)) {
|
|
|
|
__t1_framer_out(wc, 0x36, 0x08); /* LIM0: Disable any local loop */
|
|
|
|
__t1_framer_out(wc, 0x37, 0xf6 ); /* LIM1: Enable remote loop */
|
|
|
|
wc->span.maintstat = DAHDI_MAINT_REMOTELOOP;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
wc->loopupcnt = 0;
|
|
|
|
/* Same for loopdown code */
|
|
|
|
if ((!wc->span.mainttimer) && (d & 0x10)) {
|
|
|
|
/* Loop-down code detected */
|
|
|
|
if ((wc->loopdowncnt++ > 80) && (wc->span.maintstat == DAHDI_MAINT_REMOTELOOP)) {
|
|
|
|
__t1_framer_out(wc, 0x36, 0x08); /* LIM0: Disable any local loop */
|
|
|
|
__t1_framer_out(wc, 0x37, 0xf0 ); /* LIM1: Disable remote loop */
|
|
|
|
wc->span.maintstat = DAHDI_MAINT_NONE;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
wc->loopdowncnt = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wc->span.lineconfig & DAHDI_CONFIG_NOTOPEN) {
|
|
|
|
for (x=0,j=0;x < wc->span.channels;x++)
|
|
|
|
if ((wc->span.chans[x]->flags & DAHDI_FLAG_OPEN) ||
|
2010-10-20 20:23:16 +08:00
|
|
|
dahdi_have_netdev(wc->span.chans[x]))
|
2010-08-28 05:59:27 +08:00
|
|
|
j++;
|
|
|
|
if (!j)
|
|
|
|
alarms |= DAHDI_ALARM_NOTOPEN;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (c & 0xa0) {
|
|
|
|
if (wc->alarmcount >= alarmdebounce) {
|
|
|
|
if (!unchannelized)
|
|
|
|
alarms |= DAHDI_ALARM_RED;
|
|
|
|
} else
|
|
|
|
wc->alarmcount++;
|
|
|
|
} else
|
|
|
|
wc->alarmcount = 0;
|
|
|
|
if (c & 0x4)
|
|
|
|
alarms |= DAHDI_ALARM_BLUE;
|
|
|
|
|
|
|
|
if (((!wc->span.alarms) && alarms) ||
|
|
|
|
(wc->span.alarms && (!alarms)))
|
|
|
|
wc->checktiming = 1;
|
|
|
|
|
|
|
|
/* Keep track of recovering */
|
|
|
|
if ((!alarms) && wc->span.alarms)
|
|
|
|
wc->alarmtimer = DAHDI_ALARMSETTLE_TIME;
|
|
|
|
if (wc->alarmtimer)
|
|
|
|
alarms |= DAHDI_ALARM_RECOVER;
|
|
|
|
|
|
|
|
/* If receiving alarms, go into Yellow alarm state */
|
|
|
|
if (alarms && !(wc->spanflags & FLAG_SENDINGYELLOW)) {
|
|
|
|
unsigned char fmr4;
|
|
|
|
#if 1
|
|
|
|
printk(KERN_INFO "wcte1xxp: Setting yellow alarm\n");
|
|
|
|
#endif
|
|
|
|
/* We manually do yellow alarm to handle RECOVER and NOTOPEN, otherwise it's auto anyway */
|
|
|
|
fmr4 = __t1_framer_in(wc, 0x20);
|
|
|
|
__t1_framer_out(wc, 0x20, fmr4 | 0x20);
|
|
|
|
wc->spanflags |= FLAG_SENDINGYELLOW;
|
|
|
|
} else if ((!alarms) && (wc->spanflags & FLAG_SENDINGYELLOW)) {
|
|
|
|
unsigned char fmr4;
|
|
|
|
#if 1
|
|
|
|
printk(KERN_INFO "wcte1xxp: Clearing yellow alarm\n");
|
|
|
|
#endif
|
|
|
|
/* We manually do yellow alarm to handle RECOVER */
|
|
|
|
fmr4 = __t1_framer_in(wc, 0x20);
|
|
|
|
__t1_framer_out(wc, 0x20, fmr4 & ~0x20);
|
|
|
|
wc->spanflags &= ~FLAG_SENDINGYELLOW;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Re-check the timing source when we enter/leave alarm, not withstanding
|
|
|
|
yellow alarm */
|
|
|
|
if ((c & 0x10) && !unchannelized)
|
|
|
|
alarms |= DAHDI_ALARM_YELLOW;
|
|
|
|
if (wc->span.mainttimer || wc->span.maintstat)
|
|
|
|
alarms |= DAHDI_ALARM_LOOPBACK;
|
|
|
|
wc->span.alarms = alarms;
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_alarm_notify(&wc->span);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void t1_do_counters(struct t1 *wc)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
if (wc->alarmtimer) {
|
|
|
|
if (!--wc->alarmtimer) {
|
|
|
|
wc->span.alarms &= ~(DAHDI_ALARM_RECOVER);
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
dahdi_alarm_notify(&wc->span);
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
DAHDI_IRQ_HANDLER(t1xxp_interrupt)
|
|
|
|
{
|
|
|
|
struct t1 *wc = dev_id;
|
|
|
|
unsigned char ints;
|
|
|
|
unsigned long flags;
|
|
|
|
int x;
|
|
|
|
|
|
|
|
ints = inb(wc->ioaddr + WC_INTSTAT);
|
|
|
|
if (!ints)
|
|
|
|
return IRQ_NONE;
|
|
|
|
|
|
|
|
outb(ints, wc->ioaddr + WC_INTSTAT);
|
|
|
|
|
|
|
|
if (!wc->intcount) {
|
|
|
|
if (debug) printk(KERN_DEBUG "Got interrupt: 0x%04x\n", ints);
|
|
|
|
}
|
|
|
|
wc->intcount++;
|
|
|
|
|
|
|
|
if (wc->clocktimeout && !--wc->clocktimeout)
|
|
|
|
control_set_reg(wc, WC_CLOCK, 0x04 | wc->sync | clockextra);
|
|
|
|
|
|
|
|
if (ints & 0x0f) {
|
|
|
|
t1xxp_receiveprep(wc, ints);
|
|
|
|
t1xxp_transmitprep(wc, ints);
|
|
|
|
}
|
|
|
|
spin_lock_irqsave(&wc->lock, flags);
|
|
|
|
|
|
|
|
#if 1
|
|
|
|
__handle_leds(wc);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&wc->lock, flags);
|
|
|
|
|
|
|
|
/* Count down timers */
|
|
|
|
t1_do_counters(wc);
|
|
|
|
|
|
|
|
/* Do some things that we don't have to do very often */
|
|
|
|
x = wc->intcount & 15 /* 63 */;
|
|
|
|
switch(x) {
|
|
|
|
case 0:
|
|
|
|
case 1:
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
t1_check_sigbits(wc);
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
/* Check alarms 1/4 as frequently */
|
|
|
|
if (!(wc->intcount & 0x30))
|
|
|
|
t1_check_alarms(wc);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ints & 0x10)
|
|
|
|
printk(KERN_NOTICE "PCI Master abort\n");
|
|
|
|
|
|
|
|
if (ints & 0x20)
|
|
|
|
printk(KERN_NOTICE "PCI Target abort\n");
|
|
|
|
|
|
|
|
return IRQ_RETVAL(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int t1xxp_hardware_init(struct t1 *wc)
|
|
|
|
{
|
|
|
|
unsigned int falcver;
|
|
|
|
unsigned int x;
|
|
|
|
/* Hardware PCI stuff */
|
|
|
|
/* Reset chip and registers */
|
|
|
|
outb(DELAY | 0x0e, wc->ioaddr + WC_CNTL);
|
|
|
|
/* Set all outputs to 0 */
|
|
|
|
outb(0x00, wc->ioaddr + WC_AUXD);
|
|
|
|
/* Set all to outputs except AUX1 (TDO). */
|
|
|
|
outb(0xfd, wc->ioaddr + WC_AUXC);
|
|
|
|
/* Configure the serial port: double clock, 20ns width, no inversion,
|
|
|
|
MSB first */
|
|
|
|
outb(0xc8, wc->ioaddr + WC_SERC);
|
|
|
|
|
|
|
|
/* Internally delay FSC by one */
|
|
|
|
outb(0x01, wc->ioaddr + WC_FSCDELAY);
|
|
|
|
|
|
|
|
/* Back to normal, with automatic DMA wrap around */
|
|
|
|
outb(DELAY | 0x01, wc->ioaddr + WC_CNTL);
|
|
|
|
|
|
|
|
/* Make sure serial port and DMA are out of reset */
|
|
|
|
outb(inb(wc->ioaddr + WC_CNTL) & 0xf9, WC_CNTL);
|
|
|
|
|
|
|
|
/* Setup DMA Addresses */
|
|
|
|
/* Start at writedma */
|
|
|
|
outl(wc->writedma, wc->ioaddr + WC_DMAWS); /* Write start */
|
|
|
|
/* First frame */
|
|
|
|
outl(wc->writedma + DAHDI_CHUNKSIZE * 32 - 4, wc->ioaddr + WC_DMAWI); /* Middle (interrupt) */
|
|
|
|
/* Second frame */
|
|
|
|
outl(wc->writedma + DAHDI_CHUNKSIZE * 32 * 2 - 4, wc->ioaddr + WC_DMAWE); /* End */
|
|
|
|
|
|
|
|
outl(wc->readdma, wc->ioaddr + WC_DMARS); /* Read start */
|
|
|
|
/* First frame */
|
|
|
|
outl(wc->readdma + DAHDI_CHUNKSIZE * 32 - 4, wc->ioaddr + WC_DMARI); /* Middle (interrupt) */
|
|
|
|
/* Second frame */
|
|
|
|
outl(wc->readdma + DAHDI_CHUNKSIZE * 32 * 2 - 4, wc->ioaddr + WC_DMARE); /* End */
|
|
|
|
|
|
|
|
if (debug) printk(KERN_DEBUG "Setting up DMA (write/read = %08lx/%08lx)\n", (long)wc->writedma, (long)wc->readdma);
|
|
|
|
|
|
|
|
if (t1e1override > -1) {
|
|
|
|
if (t1e1override)
|
|
|
|
wc->spantype = TYPE_E1;
|
|
|
|
else
|
|
|
|
wc->spantype = TYPE_T1;
|
|
|
|
} else {
|
|
|
|
if (control_get_reg(wc, WC_CLOCK) & 0x20)
|
|
|
|
wc->spantype = TYPE_T1;
|
|
|
|
else
|
|
|
|
wc->spantype = TYPE_E1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Check out the controller */
|
|
|
|
if (debug) printk(KERN_DEBUG "Controller version: %02x\n", control_get_reg(wc, WC_VERSION));
|
|
|
|
|
|
|
|
|
|
|
|
control_set_reg(wc, WC_LEDTEST, 0x00);
|
|
|
|
|
|
|
|
if (wc->spantype == TYPE_E1) {
|
|
|
|
if (unchannelized)
|
|
|
|
wc->chanmap = chanmap_e1uc;
|
|
|
|
else
|
|
|
|
wc->chanmap = chanmap_e1;
|
|
|
|
} else
|
|
|
|
wc->chanmap = chanmap_t1;
|
|
|
|
/* Setup clock appropriately */
|
|
|
|
control_set_reg(wc, WC_CLOCK, 0x06 | wc->sync | clockextra);
|
|
|
|
wc->clocktimeout = 100;
|
|
|
|
|
|
|
|
/* Perform register test on FALC */
|
|
|
|
for (x=0;x<256;x++) {
|
|
|
|
t1_framer_out(wc, 0x14, x);
|
|
|
|
if ((falcver = t1_framer_in(wc, 0x14)) != x)
|
|
|
|
printk(KERN_DEBUG "Wrote '%x' but read '%x'\n", x, falcver);
|
|
|
|
}
|
|
|
|
|
|
|
|
t1_framer_out(wc, 0x4a, 0xaa);
|
|
|
|
falcver = t1_framer_in(wc ,0x4a);
|
|
|
|
printk(KERN_INFO "FALC version: %08x\n", falcver);
|
|
|
|
if (!falcver)
|
|
|
|
wc->spanflags |= FLAG_FALC12;
|
|
|
|
|
|
|
|
|
|
|
|
start_alarm(wc);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit t1xxp_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
|
|
{
|
|
|
|
struct t1 *wc;
|
|
|
|
unsigned int *canary;
|
|
|
|
unsigned int x;
|
|
|
|
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
if (!(wc = kmalloc(sizeof(*wc), GFP_KERNEL))) {
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(wc, 0x0, sizeof(*wc));
|
|
|
|
spin_lock_init(&wc->lock);
|
|
|
|
wc->ioaddr = pci_resource_start(pdev, 0);
|
|
|
|
wc->dev = pdev;
|
|
|
|
wc->offset = 28; /* And you thought 42 was the answer */
|
|
|
|
|
|
|
|
wc->writechunk =
|
|
|
|
/* 32 channels, Double-buffer, Read/Write */
|
|
|
|
(unsigned char *)pci_alloc_consistent(pdev, DAHDI_MAX_CHUNKSIZE * 32 * 2 * 2, &wc->writedma);
|
|
|
|
if (!wc->writechunk) {
|
|
|
|
printk(KERN_NOTICE "wcte11xp: Unable to allocate DMA-able memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Read is after the whole write piece (in bytes) */
|
|
|
|
wc->readchunk = wc->writechunk + DAHDI_CHUNKSIZE * 32 * 2;
|
|
|
|
|
|
|
|
/* Same thing... */
|
|
|
|
wc->readdma = wc->writedma + DAHDI_CHUNKSIZE * 32 * 2;
|
|
|
|
|
|
|
|
/* Initialize Write/Buffers to all blank data */
|
|
|
|
memset((void *)wc->writechunk,0x00,DAHDI_MAX_CHUNKSIZE * 2 * 2 * 32);
|
|
|
|
/* Initialize canary */
|
|
|
|
canary = (unsigned int *)(wc->readchunk + DAHDI_CHUNKSIZE * 64 - 4);
|
|
|
|
*canary = (CANARY << 16) | (0xffff);
|
|
|
|
|
|
|
|
/* Enable bus mastering */
|
|
|
|
pci_set_master(pdev);
|
|
|
|
|
|
|
|
/* Keep track of which device we are */
|
|
|
|
pci_set_drvdata(pdev, wc);
|
|
|
|
|
|
|
|
if (request_irq(pdev->irq, t1xxp_interrupt, DAHDI_IRQ_SHARED_DISABLED, "wcte11xp", wc)) {
|
|
|
|
printk(KERN_NOTICE "wcte11xp: Unable to request IRQ %d\n", pdev->irq);
|
|
|
|
kfree(wc);
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
/* Initialize hardware */
|
|
|
|
t1xxp_hardware_init(wc);
|
|
|
|
|
|
|
|
/* We now know which version of card we have */
|
|
|
|
wc->variety = "Digium Wildcard TE110P T1/E1";
|
|
|
|
|
|
|
|
for (x = 0; x < (wc->spantype == TYPE_E1 ? 31 : 24); x++) {
|
|
|
|
if (!(wc->chans[x] = kmalloc(sizeof(*wc->chans[x]), GFP_KERNEL))) {
|
|
|
|
while (x) {
|
|
|
|
kfree(wc->chans[--x]);
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(wc);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
memset(wc->chans[x], 0, sizeof(*wc->chans[x]));
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Misc. software stuff */
|
|
|
|
t1xxp_software_init(wc);
|
|
|
|
|
|
|
|
printk(KERN_INFO "Found a Wildcard: %s\n", wc->variety);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void t1xxp_stop_stuff(struct t1 *wc)
|
|
|
|
{
|
|
|
|
/* Kill clock */
|
|
|
|
control_set_reg(wc, WC_CLOCK, 0);
|
|
|
|
|
|
|
|
/* Turn off LED's */
|
|
|
|
control_set_reg(wc, WC_LEDTEST, 0);
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __devexit t1xxp_remove_one(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct t1 *wc = pci_get_drvdata(pdev);
|
|
|
|
if (wc) {
|
|
|
|
|
|
|
|
/* Stop any DMA */
|
|
|
|
__t1xxp_stop_dma(wc);
|
|
|
|
|
|
|
|
/* In case hardware is still there */
|
|
|
|
__t1xxp_disable_interrupts(wc);
|
|
|
|
|
|
|
|
t1xxp_stop_stuff(wc);
|
|
|
|
|
|
|
|
/* Immediately free resources */
|
|
|
|
pci_free_consistent(pdev, DAHDI_MAX_CHUNKSIZE * 2 * 2 * 32 * 4, (void *)wc->writechunk, wc->writedma);
|
|
|
|
free_irq(pdev->irq, wc);
|
|
|
|
|
|
|
|
/* Reset PCI chip and registers */
|
|
|
|
outb(DELAY | 0x0e, wc->ioaddr + WC_CNTL);
|
|
|
|
|
|
|
|
/* Release span, possibly delayed */
|
|
|
|
if (!wc->usecount)
|
|
|
|
t1xxp_release(wc);
|
|
|
|
else
|
|
|
|
wc->dead = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-01-04 02:26:24 +08:00
|
|
|
static DEFINE_PCI_DEVICE_TABLE(t1xxp_pci_tbl) = {
|
2010-08-28 05:59:27 +08:00
|
|
|
{ 0xe159, 0x0001, 0x71fe, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
|
|
|
|
{ 0xe159, 0x0001, 0x79fe, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
|
|
|
|
{ 0xe159, 0x0001, 0x795e, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
|
|
|
|
{ 0xe159, 0x0001, 0x79de, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
|
|
|
|
{ 0xe159, 0x0001, 0x797e, PCI_ANY_ID, 0, 0, (unsigned long) "Digium Wildcard TE110P T1/E1 Board" },
|
|
|
|
{ 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci,t1xxp_pci_tbl);
|
|
|
|
|
|
|
|
static struct pci_driver t1xxp_driver = {
|
|
|
|
.name = "wcte11xp",
|
|
|
|
.probe = t1xxp_init_one,
|
|
|
|
.remove = __devexit_p(t1xxp_remove_one),
|
|
|
|
.suspend = NULL,
|
|
|
|
.resume = NULL,
|
|
|
|
.id_table = t1xxp_pci_tbl,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init t1xxp_init(void)
|
|
|
|
{
|
|
|
|
int res;
|
|
|
|
res = dahdi_pci_module(&t1xxp_driver);
|
|
|
|
if (res)
|
|
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit t1xxp_cleanup(void)
|
|
|
|
{
|
|
|
|
pci_unregister_driver(&t1xxp_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_param(alarmdebounce, int, 0600);
|
|
|
|
module_param(loopback, int, 0600);
|
|
|
|
module_param(t1e1override, int, 0600);
|
|
|
|
module_param(unchannelized, int, 0600);
|
|
|
|
module_param(clockextra, int, 0600);
|
|
|
|
module_param(debug, int, 0600);
|
|
|
|
module_param(j1mode, int, 0600);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Wildcard TE110P Driver");
|
|
|
|
MODULE_AUTHOR("Mark Spencer <markster@digium.com>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
|
|
|
|
module_init(t1xxp_init);
|
|
|
|
module_exit(t1xxp_cleanup);
|