644 lines
16 KiB
C
644 lines
16 KiB
C
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/proc_fs.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/firmware.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <asm/io.h>
|
||
|
#include <asm/irq.h>
|
||
|
#include <asm/blackfin.h>
|
||
|
#include <asm/dma.h>
|
||
|
#include <asm/cacheflush.h>
|
||
|
#include <asm/uaccess.h>
|
||
|
#include <dahdi/kernel.h>
|
||
|
#include "mmapbus.h"
|
||
|
#include "xbus-core.h"
|
||
|
#include "dahdi_debug.h"
|
||
|
#include "xdefs.h"
|
||
|
#include "xproto.h"
|
||
|
#include "xframe_queue.h"
|
||
|
|
||
|
/* Check at compile time that sizeof(xframe_t) is a multiple of 4 */
|
||
|
typedef char
|
||
|
sizeof_xframe_t_should_be_divisible_by_4[((sizeof(xframe_t) % 4) ==
|
||
|
0) * 2 - 1];
|
||
|
|
||
|
#define ssync() __builtin_bfin_ssync()
|
||
|
|
||
|
//#define AB_IN_BUF PF5
|
||
|
/* firmware pins */
|
||
|
#define DATA PG8
|
||
|
#define NCONFIG PG9
|
||
|
#define CONF_DONE PG10
|
||
|
#define DCLK PG11
|
||
|
#define NSTATUS PG12
|
||
|
|
||
|
#ifdef DEBUG_VIA_GPIO
|
||
|
/*
|
||
|
* For debugging we can use the following two pins.
|
||
|
* These two pins are not used *after initialization*
|
||
|
*/
|
||
|
#define DEBUG_GPIO1 CONF_DONE
|
||
|
#define DEBUG_GPIO2 NSTATUS
|
||
|
|
||
|
static int rx_intr_counter;
|
||
|
#endif
|
||
|
|
||
|
#define FPGA_RX_IRQ IRQ_PF7
|
||
|
#define FPGA_TX_IRQ IRQ_PF4
|
||
|
#define FPGA_BASE_ADDR ((volatile char __iomem *)0x203FA800)
|
||
|
|
||
|
#define END_OF_FRAME 0x0001
|
||
|
#define GET_LEN 0x0002
|
||
|
#define START_RD_BURST 0x0008
|
||
|
/* stand alone Astribank without USB (Asterisk BlackFin Mode) */
|
||
|
#define AS_BF_MODE 0x0010
|
||
|
/*
|
||
|
* all data between Astribank and USB routed
|
||
|
* thru BF(EchoCanceler BlackFin Mode)
|
||
|
*/
|
||
|
#define EC_BF_MODE 0x0020
|
||
|
/* Astribank worke with USB only (no BlackFin Mode) */
|
||
|
#define NO_BF_MODE 0x0040
|
||
|
#define SET_XA_DIR 0x0080
|
||
|
#define GET_XPD_STS 0x0100
|
||
|
#define GET_CHECKSUM 0x0200
|
||
|
|
||
|
static const char rcsid[] = "$Id$";
|
||
|
|
||
|
static DEF_PARM(int, debug, 0, 0644, "Print DBG statements");
|
||
|
static DEF_PARM(int, notxrx, 0, 0644, "Don't send or receive anything");
|
||
|
|
||
|
struct counter {
|
||
|
long intr_min, intr_max;
|
||
|
long intr_avg, intr_count;
|
||
|
};
|
||
|
|
||
|
static xbus_t *global_xbus;
|
||
|
static bool tx_ready = 1;
|
||
|
static DEFINE_SPINLOCK(tx_ready_lock);
|
||
|
static struct xframe_queue txpool;
|
||
|
static unsigned int pcm_in_pool_count;
|
||
|
static bool disconnecting;
|
||
|
static struct kmem_cache *xframe_cache;
|
||
|
static struct counter tx_counter, rx_counter;
|
||
|
static unsigned long pcm_dropped;
|
||
|
|
||
|
static void print_buffer(const char *msg, const char *buf, int len)
|
||
|
{
|
||
|
int i;
|
||
|
printk(KERN_ERR "%s", msg);
|
||
|
for (i = 0; i < len; i++)
|
||
|
printk("%02X ", (unsigned char)buf[i]);
|
||
|
printk("\n");
|
||
|
}
|
||
|
|
||
|
static void update_counter(struct counter *c, struct timeval *tv1)
|
||
|
{
|
||
|
struct timeval tv2;
|
||
|
long diff;
|
||
|
do_gettimeofday(&tv2);
|
||
|
diff = usec_diff(&tv2, tv1);
|
||
|
if (c->intr_min > diff)
|
||
|
c->intr_min = diff;
|
||
|
if (c->intr_max < diff)
|
||
|
c->intr_max = diff;
|
||
|
c->intr_avg =
|
||
|
(c->intr_avg * c->intr_count + diff) / (c->intr_count + 1);
|
||
|
c->intr_count++;
|
||
|
}
|
||
|
|
||
|
static irqreturn_t xpp_mmap_rx_irq(int irq, void *dev_id)
|
||
|
{
|
||
|
unsigned short rxcnt;
|
||
|
xbus_t *xbus;
|
||
|
xframe_t *xframe;
|
||
|
__u8 *buf;
|
||
|
bool in_use = 0;
|
||
|
struct timeval tv1;
|
||
|
|
||
|
do_gettimeofday(&tv1);
|
||
|
if (unlikely(disconnecting))
|
||
|
return IRQ_HANDLED;
|
||
|
|
||
|
xbus = xbus_num(global_xbus->num);
|
||
|
BUG_ON(!xbus);
|
||
|
if (!XBUS_GET(xbus)) {
|
||
|
if (printk_ratelimit())
|
||
|
XBUS_ERR(xbus, "Dropping packet. Is shutting down.\n");
|
||
|
goto out;
|
||
|
}
|
||
|
in_use = 1;
|
||
|
|
||
|
outw(GET_LEN, FPGA_BASE_ADDR + 4);
|
||
|
rxcnt = inw(FPGA_BASE_ADDR);
|
||
|
if (rxcnt < 3) {
|
||
|
if (printk_ratelimit())
|
||
|
NOTICE("Got %d bytes\n", rxcnt);
|
||
|
goto out;
|
||
|
}
|
||
|
if (rxcnt >= XFRAME_DATASIZE) {
|
||
|
if (printk_ratelimit())
|
||
|
ERR("Bad rxcnt=%d\n", rxcnt);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
xframe = ALLOC_RECV_XFRAME(xbus);
|
||
|
if (!xframe) {
|
||
|
if (printk_ratelimit())
|
||
|
XBUS_ERR(xbus, "Empty receive_pool\n");
|
||
|
goto out;
|
||
|
}
|
||
|
buf = xframe->packets;
|
||
|
atomic_set(&xframe->frame_len, rxcnt);
|
||
|
do_gettimeofday(&xframe->tv_received);
|
||
|
#ifdef DEBUG_VIA_GPIO
|
||
|
if (rx_intr_counter & 1)
|
||
|
bfin_write_PORTGIO_SET(DEBUG_GPIO1);
|
||
|
else
|
||
|
bfin_write_PORTGIO_CLEAR(DEBUG_GPIO1);
|
||
|
#endif
|
||
|
outw(START_RD_BURST, FPGA_BASE_ADDR + 4);
|
||
|
insw((unsigned long)FPGA_BASE_ADDR, buf, rxcnt / 2);
|
||
|
#if 0
|
||
|
for (count = 0; count < rxcnt; count += 2) {
|
||
|
unsigned short v = inw(FPGA_BASE_ADDR);
|
||
|
buf[count] = v & 0xFF;
|
||
|
buf[count + 1] = v >> 8;
|
||
|
}
|
||
|
#endif
|
||
|
if (rxcnt & 1)
|
||
|
buf[rxcnt - 1] = inw(FPGA_BASE_ADDR);
|
||
|
/*
|
||
|
* Sanity check: length of first packet in frame
|
||
|
* should be no more than the frame length
|
||
|
*/
|
||
|
if (((buf[0] | (buf[1] << 8)) & 0x3FF) > rxcnt) {
|
||
|
if (printk_ratelimit()) {
|
||
|
ERR("Packet len=%d, frame len=%d\n",
|
||
|
(buf[0] | (buf[1] << 8)) & 0x3FF, rxcnt);
|
||
|
print_buffer("16 bytes of packet: ", buf, 16);
|
||
|
}
|
||
|
goto free;
|
||
|
}
|
||
|
if (debug && buf[2] != 0x12)
|
||
|
print_buffer("Received: ", buf, rxcnt);
|
||
|
if (!notxrx) {
|
||
|
xbus_receive_xframe(xbus, xframe);
|
||
|
#ifdef DEBUG_VIA_GPIO
|
||
|
if (rx_intr_counter & 1)
|
||
|
bfin_write_PORTGIO_SET(DEBUG_GPIO2);
|
||
|
else
|
||
|
bfin_write_PORTGIO_CLEAR(DEBUG_GPIO2);
|
||
|
#endif
|
||
|
goto out;
|
||
|
}
|
||
|
free:
|
||
|
FREE_RECV_XFRAME(xbus, xframe);
|
||
|
out:
|
||
|
if (in_use)
|
||
|
XBUS_PUT(xbus);
|
||
|
#ifdef DEBUG_VIA_GPIO
|
||
|
rx_intr_counter++;
|
||
|
#endif
|
||
|
update_counter(&rx_counter, &tv1);
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
static void send_buffer(unsigned char *buf, unsigned long len)
|
||
|
{
|
||
|
if (debug && len >= 3 && buf[2] != 0x11)
|
||
|
print_buffer("Sent: ", buf, len);
|
||
|
outsw((unsigned long)FPGA_BASE_ADDR, buf, len / 2);
|
||
|
if (len & 1)
|
||
|
outw((unsigned short)buf[len - 1], FPGA_BASE_ADDR);
|
||
|
outw(END_OF_FRAME, FPGA_BASE_ADDR + 4);
|
||
|
}
|
||
|
|
||
|
static irqreturn_t xpp_mmap_tx_irq(int irq, void *dev_id)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
xbus_t *xbus;
|
||
|
xframe_t *xframe;
|
||
|
struct timeval tv1;
|
||
|
|
||
|
do_gettimeofday(&tv1);
|
||
|
if (unlikely(disconnecting)) {
|
||
|
update_counter(&tx_counter, &tv1);
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
spin_lock_irqsave(&tx_ready_lock, flags);
|
||
|
xframe = xframe_dequeue(&txpool);
|
||
|
if (!xframe) {
|
||
|
tx_ready = 1;
|
||
|
spin_unlock_irqrestore(&tx_ready_lock, flags);
|
||
|
update_counter(&tx_counter, &tv1);
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
tx_ready = 0;
|
||
|
if (XPACKET_IS_PCM((xpacket_t *)xframe->packets))
|
||
|
pcm_in_pool_count--;
|
||
|
spin_unlock_irqrestore(&tx_ready_lock, flags);
|
||
|
xbus = (xbus_t *)xframe->priv;
|
||
|
BUG_ON(!xbus);
|
||
|
xbus = xbus_num(xbus->num);
|
||
|
BUG_ON(!xbus);
|
||
|
send_buffer(xframe->packets, XFRAME_LEN(xframe));
|
||
|
FREE_SEND_XFRAME(xbus, xframe);
|
||
|
update_counter(&tx_counter, &tv1);
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
static int xframe_send_common(xbus_t *xbus, xframe_t *xframe, bool pcm)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
if (unlikely(disconnecting)) {
|
||
|
FREE_SEND_XFRAME(xbus, xframe);
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
if (unlikely(notxrx)) {
|
||
|
FREE_SEND_XFRAME(xbus, xframe);
|
||
|
return 0;
|
||
|
}
|
||
|
spin_lock_irqsave(&tx_ready_lock, flags);
|
||
|
if (tx_ready) {
|
||
|
tx_ready = 0;
|
||
|
send_buffer(xframe->packets, XFRAME_LEN(xframe));
|
||
|
spin_unlock_irqrestore(&tx_ready_lock, flags);
|
||
|
FREE_SEND_XFRAME(xbus, xframe);
|
||
|
} else {
|
||
|
if (pcm && pcm_in_pool_count >= 1) {
|
||
|
static int rate_limit;
|
||
|
if ((rate_limit++ % 1000) == 0)
|
||
|
XBUS_ERR(xbus,
|
||
|
"Dropped PCM xframe "
|
||
|
"(pcm_in_pool_count=%d).\n",
|
||
|
pcm_in_pool_count);
|
||
|
FREE_SEND_XFRAME(xbus, xframe);
|
||
|
pcm_dropped++;
|
||
|
} else {
|
||
|
if (!xframe_enqueue(&txpool, xframe)) {
|
||
|
static int rate_limit;
|
||
|
spin_unlock_irqrestore(&tx_ready_lock, flags);
|
||
|
if ((rate_limit++ % 1000) == 0)
|
||
|
XBUS_ERR(xbus,
|
||
|
"Dropped xframe. "
|
||
|
"Cannot enqueue.\n");
|
||
|
FREE_SEND_XFRAME(xbus, xframe);
|
||
|
return -E2BIG;
|
||
|
}
|
||
|
if (pcm)
|
||
|
pcm_in_pool_count++;
|
||
|
}
|
||
|
spin_unlock_irqrestore(&tx_ready_lock, flags);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static xframe_t *alloc_xframe(xbus_t *xbus, gfp_t gfp_flags)
|
||
|
{
|
||
|
xframe_t *xframe = kmem_cache_alloc(xframe_cache, gfp_flags);
|
||
|
if (!xframe) {
|
||
|
static int rate_limit;
|
||
|
if ((rate_limit++ % 1000) < 5)
|
||
|
XBUS_ERR(xbus, "frame allocation failed (%d)\n",
|
||
|
rate_limit);
|
||
|
return NULL;
|
||
|
}
|
||
|
xframe_init(xbus, xframe, ((__u8 *)xframe) + sizeof(xframe_t),
|
||
|
XFRAME_DATASIZE, xbus);
|
||
|
return xframe;
|
||
|
}
|
||
|
|
||
|
static void free_xframe(xbus_t *xbus, xframe_t *xframe)
|
||
|
{
|
||
|
memset(xframe, 0, sizeof(*xframe));
|
||
|
kmem_cache_free(xframe_cache, xframe);
|
||
|
}
|
||
|
|
||
|
static int xframe_send_pcm(xbus_t *xbus, xframe_t *xframe)
|
||
|
{
|
||
|
return xframe_send_common(xbus, xframe, 1);
|
||
|
}
|
||
|
|
||
|
static int xframe_send_cmd(xbus_t *xbus, xframe_t *xframe)
|
||
|
{
|
||
|
return xframe_send_common(xbus, xframe, 0);
|
||
|
}
|
||
|
|
||
|
static struct xbus_ops xmmap_ops = {
|
||
|
.xframe_send_pcm = xframe_send_pcm,
|
||
|
.xframe_send_cmd = xframe_send_cmd,
|
||
|
.alloc_xframe = alloc_xframe,
|
||
|
.free_xframe = free_xframe,
|
||
|
};
|
||
|
|
||
|
static int fill_proc_queue(char *p, struct xframe_queue *q)
|
||
|
{
|
||
|
int len;
|
||
|
|
||
|
len = sprintf(p,
|
||
|
"%-15s: counts %3d, %3d, %3d worst %3d, overflows %3d "
|
||
|
"worst_lag %02ld.%ld ms\n",
|
||
|
q->name, q->steady_state_count, q->count, q->max_count,
|
||
|
q->worst_count, q->overflows, q->worst_lag_usec / 1000,
|
||
|
q->worst_lag_usec % 1000);
|
||
|
xframe_queue_clearstats(q);
|
||
|
return len;
|
||
|
}
|
||
|
|
||
|
static int fill_proc_counter(char *p, struct counter *c)
|
||
|
{
|
||
|
return sprintf(p, "min=%ld\nmax=%ld\navg=%ld\ncount=%ld\n", c->intr_min,
|
||
|
c->intr_max, c->intr_avg, c->intr_count);
|
||
|
}
|
||
|
|
||
|
static int xpp_mmap_proc_read(char *page, char **start, off_t off, int count,
|
||
|
int *eof, void *data)
|
||
|
{
|
||
|
int len = 0;
|
||
|
len += fill_proc_queue(page + len, &txpool);
|
||
|
len += sprintf(page + len, "pcm_in_pool_count=%d\n", pcm_in_pool_count);
|
||
|
len += sprintf(page + len, "pcm_dropped=%lu\n", pcm_dropped);
|
||
|
len += sprintf(page + len, "\nrx_counter:\n");
|
||
|
len += fill_proc_counter(page + len, &rx_counter);
|
||
|
len += sprintf(page + len, "\ntx_counter:\n");
|
||
|
len += fill_proc_counter(page + len, &tx_counter);
|
||
|
if (len <= off + count) {
|
||
|
*eof = 1;
|
||
|
tx_counter.intr_min = rx_counter.intr_min = INT_MAX;
|
||
|
tx_counter.intr_max = rx_counter.intr_max = 0;
|
||
|
tx_counter.intr_avg = rx_counter.intr_avg = 0;
|
||
|
tx_counter.intr_count = rx_counter.intr_count = 0;
|
||
|
}
|
||
|
*start = page + off;
|
||
|
len -= off;
|
||
|
if (len > count)
|
||
|
len = count;
|
||
|
if (len < 0)
|
||
|
len = 0;
|
||
|
return len;
|
||
|
}
|
||
|
|
||
|
static int xpp_mmap_proc_write(struct file *file, const char __user *buffer,
|
||
|
unsigned long count, void *data)
|
||
|
{
|
||
|
int i = 0;
|
||
|
char *txchunk, *p, *endp;
|
||
|
|
||
|
if (count >= XFRAME_DATASIZE * 3 + 10)
|
||
|
return -EINVAL;
|
||
|
p = txchunk = kmalloc(count + 1, GFP_KERNEL);
|
||
|
if (copy_from_user(txchunk, buffer, count)) {
|
||
|
count = -EFAULT;
|
||
|
goto out;
|
||
|
}
|
||
|
txchunk[count] = '\0';
|
||
|
|
||
|
while (*p) {
|
||
|
unsigned long value;
|
||
|
while (*p == ' ' || *p == '\t' || *p == '\n' || *p == '\r')
|
||
|
p++;
|
||
|
if (*p == '\0')
|
||
|
break;
|
||
|
value = simple_strtoul(p, &endp, 16);
|
||
|
if (endp == p || value > 0xFF) {
|
||
|
INFO("%s: Bad input\n", __func__);
|
||
|
count = -EINVAL;
|
||
|
goto out;
|
||
|
}
|
||
|
p = endp;
|
||
|
txchunk[i++] = (char)value;
|
||
|
}
|
||
|
send_buffer(txchunk, i);
|
||
|
out:
|
||
|
kfree(txchunk);
|
||
|
return count;
|
||
|
}
|
||
|
|
||
|
static struct mmap_driver astribank_driver = {
|
||
|
.module = THIS_MODULE,
|
||
|
.driver = {
|
||
|
.name = "xpp_mmap",
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static struct mmap_device astribank_dev = {
|
||
|
.name = "astribank0",
|
||
|
.driver = &astribank_driver,
|
||
|
};
|
||
|
|
||
|
static int __init xpp_mmap_load_fpga(u8 * data, size_t size)
|
||
|
{
|
||
|
size_t i;
|
||
|
/* set data, nconfig and dclk to port out */
|
||
|
bfin_write_PORTGIO_DIR(bfin_read_PORTGIO_DIR() | DATA | NCONFIG | DCLK);
|
||
|
bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~(DATA | NCONFIG | DCLK));
|
||
|
/* set conf_done and nstatus to port in */
|
||
|
bfin_write_PORTGIO_DIR(
|
||
|
bfin_read_PORTGIO_DIR() & ~(CONF_DONE | NSTATUS));
|
||
|
bfin_write_PORTGIO_INEN(
|
||
|
bfin_read_PORTGIO_INEN() & ~(DATA | NCONFIG | DCLK));
|
||
|
bfin_write_PORTGIO_INEN(bfin_read_PORTGIO_INEN() | CONF_DONE | NSTATUS);
|
||
|
|
||
|
/* reset fpga during configuration holds nCONFIG low */
|
||
|
bfin_write_PORTGIO_CLEAR(NCONFIG);
|
||
|
udelay(40); /* Tcfg ~40us delay */
|
||
|
/* transition nCONFIG to high - reset end. */
|
||
|
bfin_write_PORTGIO_SET(NCONFIG);
|
||
|
udelay(40); /* Tcf2ck ~40us delay */
|
||
|
if (!(bfin_read_PORTGIO() & NSTATUS))
|
||
|
return -EIO; /* report reset faill - Tcf2st1 pass */
|
||
|
|
||
|
#if 0
|
||
|
if (!(bfin_read_PORTGIO() & CONF_DONE))
|
||
|
return -EIO;
|
||
|
#endif
|
||
|
bfin_write_PORTGIO_CLEAR(DCLK);
|
||
|
for (i = 0; i < size; i++) { /* loop EP2OUT buffer data to FPGA */
|
||
|
int j;
|
||
|
u8 __u8 = data[i];
|
||
|
/*
|
||
|
* Send the configuration data through the DATA0 pin
|
||
|
* one bit at a time.
|
||
|
*/
|
||
|
for (j = 0; j < 8; j++)
|
||
|
{
|
||
|
if (__u8 & 1)
|
||
|
bfin_write_PORTGIO_SET(DATA);
|
||
|
else
|
||
|
bfin_write_PORTGIO_CLEAR(DATA);
|
||
|
__u8 >>= 1;
|
||
|
bfin_write_PORTGIO_SET(DCLK);
|
||
|
bfin_write_PORTGIO_CLEAR(DCLK);
|
||
|
}
|
||
|
if (!(bfin_read_PORTGIO() & NSTATUS))
|
||
|
return -EIO; /* check the nSTATUS */
|
||
|
}
|
||
|
bfin_write_PORTGIO_CLEAR(DATA);
|
||
|
udelay(1);
|
||
|
if (!(bfin_read_PORTGIO() & CONF_DONE))
|
||
|
return -EIO;
|
||
|
#ifdef DEBUG_VIA_GPIO
|
||
|
/*
|
||
|
* Normal initialization is done. Now we can reuse
|
||
|
* some pins that were used only during initialization
|
||
|
* to be used for debugging from now on.
|
||
|
*/
|
||
|
/* set to port out */
|
||
|
bfin_write_PORTGIO_DIR(
|
||
|
bfin_read_PORTGIO_DIR() | DEBUG_GPIO1 | DEBUG_GPIO2);
|
||
|
bfin_write_PORTG_FER(bfin_read_PORTG_FER() &
|
||
|
~(DEBUG_GPIO1 | DEBUG_GPIO2));
|
||
|
bfin_write_PORTGIO_INEN(bfin_read_PORTGIO_INEN() &
|
||
|
~(DEBUG_GPIO1 | DEBUG_GPIO2));
|
||
|
#endif
|
||
|
udelay(40); /* tCD2UM - CONF_DONE high to user mode */
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void __exit xpp_mmap_unload_fpga(void)
|
||
|
{
|
||
|
/* reset fpga during configuration holds nCONFIG low */
|
||
|
bfin_write_PORTGIO_CLEAR(NCONFIG);
|
||
|
udelay(40); /* Tcfg ~40us delay */
|
||
|
/* disable output pin */
|
||
|
bfin_write_PORTGIO_DIR(
|
||
|
bfin_read_PORTGIO_DIR() & ~(DATA | NCONFIG | DCLK));
|
||
|
/* disable input buffer */
|
||
|
bfin_write_PORTGIO_INEN(
|
||
|
bfin_read_PORTGIO_INEN() & ~(CONF_DONE | NSTATUS));
|
||
|
INFO("FPGA Firmware unloaded\n");
|
||
|
}
|
||
|
|
||
|
static int __init xpp_mmap_load_firmware(void)
|
||
|
{
|
||
|
const struct firmware *fw;
|
||
|
int ret;
|
||
|
if ((ret =
|
||
|
request_firmware(&fw, "astribank.bin", &astribank_dev.dev)) < 0)
|
||
|
return ret;
|
||
|
xpp_mmap_load_fpga(fw->data, fw->size);
|
||
|
release_firmware(fw);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int __init xpp_mmap_init(void)
|
||
|
{
|
||
|
int ret;
|
||
|
struct proc_dir_entry *proc_entry;
|
||
|
|
||
|
if ((ret = register_mmap_bus()) < 0)
|
||
|
goto bus_reg;
|
||
|
if ((ret = register_mmap_driver(&astribank_driver)) < 0)
|
||
|
goto driver_reg;
|
||
|
if ((ret = register_mmap_device(&astribank_dev)) < 0)
|
||
|
goto dev_reg;
|
||
|
if ((ret = xpp_mmap_load_firmware()) < 0) {
|
||
|
ERR("xpp_mmap_load_firmware() failed, errno=%d\n", ret);
|
||
|
goto fail_fw;
|
||
|
}
|
||
|
|
||
|
if ((ret =
|
||
|
request_irq(FPGA_RX_IRQ, xpp_mmap_rx_irq, IRQF_TRIGGER_RISING,
|
||
|
"xpp_mmap_rx", NULL)) < 0) {
|
||
|
ERR("Unable to attach to RX interrupt %d\n", FPGA_RX_IRQ);
|
||
|
goto fail_irq_rx;
|
||
|
}
|
||
|
if ((ret =
|
||
|
request_irq(FPGA_TX_IRQ, xpp_mmap_tx_irq, IRQF_TRIGGER_RISING,
|
||
|
"xpp_mmap_tx", NULL)) < 0) {
|
||
|
ERR("Unable to attach to TX interrupt %d\n", FPGA_TX_IRQ);
|
||
|
goto fail_irq_tx;
|
||
|
}
|
||
|
if (!request_region((resource_size_t) FPGA_BASE_ADDR, 8, "xpp_mmap")) {
|
||
|
ERR("Unable to request memory region at %p\n", FPGA_BASE_ADDR);
|
||
|
goto fail_region;
|
||
|
}
|
||
|
outw(AS_BF_MODE, FPGA_BASE_ADDR + 4);
|
||
|
|
||
|
xframe_cache =
|
||
|
kmem_cache_create("xframe_cache",
|
||
|
sizeof(xframe_t) + XFRAME_DATASIZE, 0, 0,
|
||
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 23)
|
||
|
NULL,
|
||
|
#endif
|
||
|
NULL);
|
||
|
if (!xframe_cache) {
|
||
|
ret = -ENOMEM;
|
||
|
goto fail_cache;
|
||
|
}
|
||
|
/* interface with Dahdi */
|
||
|
global_xbus = xbus_new(&xmmap_ops, XFRAME_DATASIZE, NULL);
|
||
|
if (!global_xbus) {
|
||
|
ret = -ENOMEM;
|
||
|
goto fail_xbus;
|
||
|
}
|
||
|
strncpy(global_xbus->connector, "mmap", XBUS_DESCLEN);
|
||
|
strncpy(global_xbus->label, "mmap:0", LABEL_SIZE);
|
||
|
|
||
|
xframe_queue_init(&txpool, 10, 200, "mmap_txpool", global_xbus);
|
||
|
if (!
|
||
|
(proc_entry =
|
||
|
create_proc_entry("xpp_mmap", 0, global_xbus->proc_xbus_dir))) {
|
||
|
ERR("create_proc_entry() failed\n");
|
||
|
ret = -EINVAL;
|
||
|
goto fail_proc;
|
||
|
}
|
||
|
proc_entry->write_proc = xpp_mmap_proc_write;
|
||
|
proc_entry->read_proc = xpp_mmap_proc_read;
|
||
|
/* Go xbus, go! */
|
||
|
xbus_connect(global_xbus);
|
||
|
INFO("xpp_mmap module loaded\n");
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
fail_proc:
|
||
|
xbus_disconnect(global_xbus);
|
||
|
fail_xbus:
|
||
|
kmem_cache_destroy(xframe_cache);
|
||
|
fail_cache:
|
||
|
release_region((resource_size_t) FPGA_BASE_ADDR, 8);
|
||
|
fail_region:
|
||
|
free_irq(FPGA_TX_IRQ, NULL);
|
||
|
fail_irq_tx:
|
||
|
free_irq(FPGA_RX_IRQ, NULL);
|
||
|
fail_irq_rx:
|
||
|
fail_fw:
|
||
|
unregister_mmap_device(&astribank_dev);
|
||
|
dev_reg:
|
||
|
unregister_mmap_driver(&astribank_driver);
|
||
|
driver_reg:
|
||
|
unregister_mmap_bus();
|
||
|
bus_reg:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void __exit xpp_mmap_exit(void)
|
||
|
{
|
||
|
xbus_t *xbus;
|
||
|
DBG(GENERAL, "\n");
|
||
|
disconnecting = 1;
|
||
|
xbus = xbus_num(global_xbus->num);
|
||
|
remove_proc_entry("xpp_mmap", xbus->proc_xbus_dir);
|
||
|
xframe_queue_clear(&txpool);
|
||
|
xbus_disconnect(xbus);
|
||
|
kmem_cache_destroy(xframe_cache);
|
||
|
|
||
|
release_region((resource_size_t) FPGA_BASE_ADDR, 8);
|
||
|
free_irq(FPGA_RX_IRQ, NULL);
|
||
|
free_irq(FPGA_TX_IRQ, NULL);
|
||
|
|
||
|
unregister_mmap_device(&astribank_dev);
|
||
|
unregister_mmap_driver(&astribank_driver);
|
||
|
unregister_mmap_bus();
|
||
|
xpp_mmap_unload_fpga();
|
||
|
INFO("xpp_mmap module unloaded\n");
|
||
|
}
|
||
|
|
||
|
module_init(xpp_mmap_init);
|
||
|
module_exit(xpp_mmap_exit);
|
||
|
MODULE_AUTHOR("Alexander Landau <landau.alex@gmail.com>");
|
||
|
MODULE_LICENSE("GPL");
|