dahdi-linux/build_tools/live_dahdi

#!/bin/sh

LINUX_DIR=${LINUX_DIR:=.}
TOOLS_DIR=${TOOLS_DIR:=../dahdi-tools}
DYNAMIC_LOC="${DYNAMIC_LOC:-no}"
DESTDIR=$PWD/live
LIVE_DAHDI_RSYNC_DIR=${LIVE_DAHDI_RSYNC_DIR:-/tmp/dahdi}
KVERS=${KVERS:-`uname -r`}
XPP_SYNC=${XPP_SYNC:-auto}
AST_SCRIPT=${AST_SCRIPT:-/etc/init.d/asterisk}
# Use this file to pass options to modules:
PERLLIBDIR=`perl -V:sitelib | cut -d "'" -f 2`
EXTRA_MODS="crc_ccitt"

# Manual list of modules. They will be loaded by insmod.
# If reside in a subdir, add it explicitly.

MODULES_LOAD="${MODULES_LOAD:-dahdi dahdi_echocan_mg2}"

# this one *is* resolved recusively. 
# the only reason to set a different value is if you use hpec / oslec,
# as Zaptel depends on them.
REMOVE_MODULES="${REMOVE_MODULES:-dahdi}" # "dahdi oslec"?

if [ -r $DESTDIR/live.conf ]; then . $DESTDIR/live.conf; fi

MODULES_DIR="$DESTDIR/lib/modules/$KVERS/dahdi"
if [ ! -d "$LINUX_DIR" ]; then
	echo >&2 "$0:dahdi-linux dir '$LINUX_DIR' does not exits.  Aborting".
	exit 1
fi

set -e
LINUX_DIR_FULL=`(cd $LINUX_DIR; pwd)`

set_tools_dir() {
	if [ ! -d "$TOOLS_DIR" ]; then
		echo >&2 "$0:dahdi-tools dir '$TOOLS_DIR' does not exits.  Aborting".
		exit 1
	fi
	TOOLS_DIR_FULL=`(cd $TOOLS_DIR; pwd)`
}

# Give priority to our installed binaries:
PATH=$DESTDIR/sbin:$DESTDIR/usr/sbin:$PATH
export PATH

# TODO: If you already use PERL5DIR, please fix this part:
PERL5LIB="$DESTDIR/$PERLLIBDIR"
export PERL5LIB

# used in xpp_fxloader:
FIRMWARE_DIR="$DESTDIR/usr/share/dahdi"
export FIRMWARE_DIR

ASTRIBANK_TOOL="$DESTDIR/usr/sbin/astribank_tool"
export ASTRIBANK_TOOL

ASTRIBANK_HEXLOAD="$DESTDIR/usr/sbin/astribank_hexload"
export ASTRIBANK_HEXLOAD

# make sure Astribank initialization scripts are from our tree.
xpp_ARGS="$xpp_ARGS initdir=$FIRMWARE_DIR"
dahdi_ARGS="$dahdi_ARGS tools_rootdir=$DESTDIR"

if [ "$DYNAMIC_LOC" = 'yes' ]; then
	MODULES_LOAD="$MODULES_LOAD dahdi_dynamic dahdi_dynamic_loc"
fi

# the same as xpp/utils/dahdi_drivers .
# With the remote mode, I can't rely on files in the source directory.
dahdi_drivers() {
	perl -MDahdi::Hardware -e '
		my @drivers = Dahdi::Hardware->drivers;
		print join(" ", @drivers);
		'
}

# Add modules for existing hardware on the system for the list of 
# modules to load.
#
# As module loading is manual with insmod, some manual fixes are needed.
set_modules_to_load() {
	for mod in `dahdi_drivers`; do
		case "$mod" in
		xpp_usb) 
			MODULES_LOAD="$MODULES_LOAD xpp/xpp xpp/xpd_fxs"
			MODULES_LOAD="$MODULES_LOAD xpp/xpd_fxo xpp/xpd_pri" 
			if [ -r "$MODULES_DIR/xpp/xpd_bri.ko" ]; then
				MODULES_LOAD="$MODULES_LOAD xpp/xpd_bri"
			fi
			if [ -r "$MODULES_DIR/xpp/xpd_echo.ko" ]; then
				MODULES_LOAD="$MODULES_LOAD xpp/xpd_echo"
			fi
			MODULES_LOAD="$MODULES_LOAD xpp/xpp_usb"
			;;
		wctdm24xxp | wcte12xp)
			# FIXME: better automation of the voicebus
			# dependency:
			MODULES_LOAD="$MODULES_LOAD voicebus/dahdi_voicebus $mod/$mod"
			EXTRA_MODS="$EXTRA_MODS firmware_class"
				;;
		wct4xxp | wcte12xp | wctc4xp | wcb4xxp)
			MODULES_LOAD="$MODULES_LOAD $mod/$mod"
				;;
		wanpipe)
			: # requires different handling
			;;
		*)
			MODULES_LOAD="$MODULES_LOAD $mod"
			;;
		esac
	done
}

# Initialize the Xorcom Astribank (xpp/) using perl utiliites:
# intended to replace all the the three functions below if user has 
# installed the dahdi-perl utilities.
xpp_startup() {
	# do nothing if there are no astribank devices:
	if ! grep -q connected /proc/xpp/xbuses 2>/dev/null; then return 0; fi

	echo "Waiting for Astribank devices to initialize:"
	"$FIRMWARE_DIR/waitfor_xpds" # Asusmes a recent dahdi-tools
	
	# overriding locales for the above two, as perl can be noisy
	# when locales are missing.
	# No register all the devices if they didn't auto-register:
	LC_ALL=C dahdi_registration on

	# this one could actually be run after dahdi_cfg:
	LC_ALL=C xpp_sync "$XPP_SYNC"
}

# recursively unload a module and its dependencies, if possible.
# where's modprobe -r when you need it?
# inputs: module to unload.
# returns: the result from 
unload_module() {
	module="$1"
	line=`lsmod 2>/dev/null | grep "^$1 " || :`
	if [ "$line" = '' ]; then return; fi # module was not loaded

	set -- $line
	# $1: the original module, $2: size, $3: refcount, $4: deps list
	mods=`echo $4 | tr , ' '`
	ec_modules=""
	# xpp_usb keeps the xpds below busy if an xpp hardware is
	# connected. Hence must be removed before them:
	case "$module" in xpd_*) mods="xpp_usb $mods";; esac

	for mod in $mods; do
		case "$mod" in
		dahdi_echocan_*)
			ec_modules="$mod $ec_modules"
			;;
		*)
			# run in a subshell, so it won't step over our vars:
			(unload_module $mod)
			;;
		esac
	done
	# Now that all the other dependencies are unloaded, we can unload the
	# dahdi_echocan modules.  The drivers that register spans may keep
	# references on the echocan modules before they are unloaded.
	for mod in $ec_modules; do
		(unload_module $mod)
	done
	rmmod $module
}

load_dynamic() {
	if [ "$DYNAMIC_LOC" != yes ]; then return; fi

	local conf_file="$DESTDIR/etc/dahdi/dynamic.conf"
	if [ ! -r "$conf_file" ]; then
		cat <<EOF >"$conf_file"
dynamic=loc,1:0,5,0
dynamic=loc,1:1,5,0
EOF
	fi
	
	dahdi_cfg -c "$conf_file"
}

unload_dynamic() {
	if [ "$DYNAMIC_LOC" != yes ]; then return; fi

	local conf_file="$DESTDIR/etc/dahdi/dynamic.conf"
	if [ ! -r "$conf_file" ]; then return; fi

	dahdi_cfg -c "$conf_file" -s || :
}

genconf() {
	GENCONF_PARAMETERS=$DESTDIR/etc/dahdi/genconf_parameters \
	DAHDI_CONF_FILE=$DESTDIR/etc/dahdi/system.conf \
	DAHDI_MODS_FILE=$DESTDIR/etc/dahdi/modules \
	CHAN_DAHDI_CHANNELS_FILE=$DESTDIR/etc/asterisk/dahdi-channels.conf \
		dahdi_genconf
	if [ "$DYNAMIC_LOC" = yes ]; then
		cat "$DESTDIR/etc/dahdi/dynamic.conf" >>"$DESTDIR/etc/dahdi/system.conf"
	fi
	dahdi_cfg -c $DESTDIR/etc/dahdi/system.conf
	# TODO: fxotune, hpec
}

run_asterisk() {
	$AST_SCRIPT start
}

usage() {
	me=`basename $0`
	echo "$me: Run DAHDI in a test environment"
	echo 'Version: $Id$'
	echo ''
	echo "Usage:                    equivalent of:"
	echo "$me configure      ./configure"
	echo "$me install        make install"
	echo "$me config         make config"
	echo "$me unload         /etc/init.d/dahdi stop"
	echo "$me load           /etc/init.d/dahdi start"
	echo "$me reload         /etc/init.d/dahdi restart"
	echo "$me xpp-firm       (Reset and load xpp firmware)"
	echo "$me genconf        dahdi_genconf; dahdi_cfg"
	echo "$me asterisk       /etc/init.d/asterisk start"
	echo "$me symlink_ast    symlink dahdi-channels.conf"
	echo "$me rsync TARGET   (copy filea to /tmp/live in host TARGET)"
	echo "$me exec  COMMAND  (Run COMMAND in 'live' environment)"
	echo ""
	echo "dahdi-linux: $LINUX_DIR"
	echo "dahdi-tools: $TOOLS_DIR"
}

case "$1" in
configure)
	shift
	set_tools_dir
	cd "$TOOLS_DIR"; ./configure --with-dahdi="$LINUX_DIR_FULL" "$@"
	;;
install)
	shift
	set_tools_dir
	cd "$LINUX_DIR"; make install DESTDIR=$DESTDIR "$@"
	cd "$TOOLS_DIR_FULL"; make install DESTDIR=$DESTDIR DYNFS=yes "$@"
	;;
config)
	shift
	set_tools_dir
	cd "$TOOLS_DIR"; make config DESTDIR=$DESTDIR "$@"
	mkdir -p $DESTDIR/etc/asterisk
	cat >"$FIRMWARE_DIR/live-init.conf" <<EOF
PATH="$PATH" # FIXME: add to existing \$PATH?
export PATH
dahdiconfdir="${DESTDIR}/etc/dahdi"
export dahdiconfdir
EOF
	ln -s ../../../etc/dahdi/xpp.conf "$DESTDIR/usr/share/dahdi/"
	;;
rsync)
	if [ $# -ne 2 ]; then
		echo >&2 "$0: Error: rsync requires a target parameter".
		exit 1
	fi
	# copy the script itself and the installed directory to the
	# target host:
	rsync -ai "$0" $DESTDIR "$2:$LIVE_DAHDI_RSYNC_DIR"
	;;
unload)
	# OK for Asterisk not to be running. TODO: a better test?
	$AST_SCRIPT stop || :
	unload_dynamic
	for mod in $REMOVE_MODULES; do
		unload_module $mod
	done
	;;
load)
	# TODO: Find a way to use modprobe.
	# Or implement a way to pass arguments to modules here (yuck)
	set_modules_to_load
	for mod in $EXTRA_MODS; do
		modprobe $mod || : # FIXME: Make this optional?
	done
	for module in $MODULES_LOAD; do
		eval module_args="\$`basename ${module}`_ARGS"
		insmod $MODULES_DIR/$module.ko $module_args
	done
	xpp_startup
	load_dynamic
	genconf
	# or find a way to reuse init.d start sequence.

	# TODO: A local copy of Asterisk, configured with dahdi_gnconf. 
	# doable, but trickier.
	run_asterisk
	if [ "$LIVE_DAHDI_FREEPBXDB" = 'yes' ]; then
		GENCONF_PARAMETERS=$DESTDIR/etc/dahdi/genconf_parameters \
			dahdi_genconf freepbxdb
	fi
	;;
genconf)
	genconf
	;;
asterisk)
	run_asterisk
	;;
symlink_ast)
	ln -sf "$DESTDIR/etc/asterisk/dahdi-channels.conf" /etc/asterisk/
	;;
reload)
	$0 unload
	$0 load
	;;
exec)
	if [ $# -lt 2 ]; then
		# No command given: start a subshell in the environemnt
		# of the "live" system:
		echo >&2 "$0: Error: exec requires a command to run"
		exit 1
	fi

	# Command given: run it:
	shift
	"$@"
	;;
xpp-firm)
	# Still broken. Needs to be run several times.
	# set XPP_HOTPLUG_DISABLED=yes in /etc/dahdi/init.conf
	XPP_FIRMWARE_DIR=$FIRMWARE_DIR \
		"$FIRMWARE_DIR/xpp_fxloader" reset
	sleep 5
	XPP_FIRMWARE_DIR=$FIRMWARE_DIR \
	XPP_CONFIG="$DESTDIR/etc/dahdi/xpp.conf" \
		"$FIRMWARE_DIR/xpp_fxloader" load
	;;
help|'')
	usage
	;;
*)
	echo >&2 "$0: Error: incorrect command \"$1\". Aborting"
	usage
	exit 1
esac