When joining breakout audio, the output device selected in the main room is
used in breakout.
When returning from breakout rooms, the output audio device previously set in
the main room is restored.
Some specific info:
SIPSession doesn't handle Storage anymore, we do this in SIPBridge, since
it has more info about the current selected device and it doesn't depend of
a session being oppened.
We also now pass the output device ID when joining audio sessions. We can
then keep this information in the Storage.
Closes#11663
This commit contains three fixes: one already reported and two detected
during the investigation of the solution.
This started as a fix for firefox (#12023), but i also fixed the muted
alert/banner when device changes: the banner wasn't detecting device changes,
unless audio was deactived/actived.
There's another fix for the microphone stream: we now keep sender's track
disabled if it was already disabled for the sender's track of the previous
selected device.
Also did small refactor for eslint checking.
Some technical information: in sip bridge (bridge/sip.js), setInputStream and
liveChangeInputDevice function were both fully turned into promises, which
guarantees we have everything ready when it resolves to the respective values.
This helps AudioManager (audio-manager/index.js) to sequentially sets and
tracks the state of the current microphone stream (inputStream), when calling
liveChangeInputDevice function: we first set the current stream to null,
creats a new one and then set it to the newly created value - this is needed
because MutedAlert (muted-alert/component.jsx) can then gracefully
allocate/deallocate the cloned stream when it is set to a non-null/null value
(the cloned stream is used for speech detection with hark).
In MutedAlert we also make sure to enable the cloned stream's audio
tracks, just in case the user change the device when muted (audio track is
disabled in this case), which also leaves the cloned stream muted (we then
enable the track to allow speech detection).
Closes#12023
Video streams can be sorted by voice floor activity in the client according to FreeSWITCH´s floor events. The feature works together with pagination, essentially giving an Last-N like experience while not disrupting too much
Made video stream sorting extensible in a way. The sorting modes for pagination and unbounded can be configured in settings.yml and new sorting modes can be added to the stream sorting util under video-provider. Inline docs explain how to do that
Changed how the stream ID attribute from video-streams collection was passed to downstream components; we had an array map that was executed every change just to map stream to cameraId, which is bizarre. So I changed the cameraId usage in downstream components to be conformat with the collection attributes and shaved off the map where it wasnt needed
Add better selectors to video-list-item container´s VoiceUser fetch
Etherpad has a limitation of 50 characters for it's pad ids. Although
our SHA1 hash function generates 40 characters length values, after
prefixing (Meteor's instance id) and suffixing (closed captions support)
the pad id we can reach an invalid size.
Firefox doesn't create a device called 'default' and we were trying
to set this when user is joining the room. We don't do this anymore, letting
devices to be changed when there's some user request.
Moved outputDeviceId inputDeviceId information to be managed in bridge
(just like we do with inputDeviceId), we don't store this duplicated
information in audio container anymore.
Fixed the eslint warning in "playAlertSound(url) { ..."
We are safe to let users try to change input/output devices because the
device list is retrieved from enumerateDevices.
Allow listenonly users to change output devices
Fixed dynamic audio device change for firefox
Fixed shortcuts for audio join/leave
Show (with a bold font) the current selected device
[performance] Prevent calling mediaDevices.enumerateDevices every time we render
the selector. This adds a delay (~200ms, on my chrome setup) to render this component
[performance] Do not call enumerateDevices to search for new devices, instead we listen on mediaDevices.deviceChange event
Small refactoring and fixed a few errors that were being throw in browser's console
Fixed device selection when this is done in audio-settings modal
Fallback to default device when current device is removed
Truncate device name length
Renamed "Input","Output" labels to "Microphone","Speakers", respectively
Update eslint rule for accessKey
- Removed the connection-status history from the user list's gear
icon and now is opened by the connection-status button. Moderators will
render the same modal as before and viewers will only have access to their
own data.
- Added data-savings shortcut at the connection-status modal.
- Added websocket round-trip time.
Since Meteor was split in multiple process and events started to be
filtered by instances, all Etherpad's Redis events were being discarded.
Etherpad has a Redis' publisher plugin that is unaware of BigBlueButton's
existence. All the communication between them is kept simple with minimal
of internal data exchange. The concept of distincts subscribers at Meteor's
side broke part of this simplicity and, now, Etherpad has to know which
instance must receive it's messages. To provide such information I decided
to include Meteor's instance as part of the pad's id. Should look like:
- [instanceId]padId for the shared notes
- [instanceId]padId_cc_(locale) for the closed captions
With those changes the pad id generation made at the recording scripts had to
be re-done because there is no instance id available. Pad id is now recorded at
akka-apps and queried while archiving the shared notes.
Modified the previous implementation of the whiteboard individual access to remove
multiple Collections dependency on this feature. Multi-user whiteboard is now an
array instead of a boolean value and most of the access control can be synchronized
and handled by akka-apps.
Moderators are able to send a message to the meeting's guest lobby. This new
event reaches bbb-web and is sent to the guest user with her/his status response
while polling. All guest users that are waiting for acceptance will be able to
read this message.
enableGuestLobbyMessage is disabled by default.
Without 'exact' match, the browser fallbacks to the default inputDeviceId
This prevents the error (input device error) when breakout is ended and we try
to skipCheck the microphone when user returns to main room (assuming the
user had the microphone active before joining breakout room).
Without 'exact' match, the browser fallbacks to the default inputDeviceId
This prevents the error (input device error) when breakout is ended and we try
to skipCheck the microphone when user returns to main room (assuming the
user had the microphone active before joining breakout room). Related
to the feature c451666d52
After audio reconnection, a muted user would have it's microphone unmuted by default, unless muteOnStart is set to true. This fix this problem.
Fixes#9016
Associate pads with meetings so session validation is restricted to the
meeting's valid session tokens.
Meteor will dispatch new redis events on shared notes and closed captions
pads creation. This event will go through apps and reach web to populate
a new meeting's pad collection that contains all valid pad id's for that
session. Nginx will use this collection to check if the user's session token
belongs to the pad's authorized users.
Besides these modifications, an extra change will be needed at notes.nginx.
Location /pad/p/ needs to change it's auth_request:
from /bigbluebutton/connection/checkAuthorization;
to /bigbluebutton/connection/validatePad;
When managing Etherpad's pads, Meteor makes API calls to initiate the closed captions
and shared notes modules. The pad id was being mapped to a shorter id than the meeting
id because of a Etherpad lenght limitation.
Changed to something less guessable.
* add param to force echo test when user joins audio after init
* fix UI stuck on connecting when userdata-bbb_auto_join_audio=false
* fix conditions for joinFullAudioImmediately and joinFullAudioEchoTest | remove old format
* remove extra param in getItem
* recover audioLocked | only set getEchoTest if doesnt exist
As explained in #11143, disabling audio filters is desired in some scenarios.
This basically adds an option for user to disable default constraints.
When user doesn't change this value in Settings > Application, the default
value for each audio constraints is retrieved from settings.yml.
When user changes this value in Settings > Application, audio
filters (AGC, Noise Supression and Echo Cancellation) are all set to
true/false, according to the value selected in the Settings GUI.
To start it simple, we decided to not to add a different setting in the GUI for
each audio contraint. This may be added in the future, though (perhaps in a
dedicated Audio Settings tab)
This is related to #4873
As explained in #11143, disabling audio filters is desired in some scenarios.
This basically adds an option for user to disable default constraints.
When user doesn't change this value in Settings > Application, the default
value for each audio constraints is retrieved from settings.yml.
When user changes this value in Settings > Application, audio
filters (AGC, Noise Supression and Echo Cancellation) are all set to
true/false, according to the value selected in the Settings GUI.
To start it simple, we decided to not to add a different setting in the GUI for
each audio contraint. This may be added in the future, though (perhaps in a
dedicated Audio Settings tab)
This is related to #4873
In some scenarios, there's no need for the browser to apply such audio filters. For example, when user's microphone already does audio filtering (echo cancellation, noise supression ...).
This commit doens't change the current behavior (filters still follow browser's default config): admins need to uncomment/set these values if disabling/enabling specific filters if desired.
This is related to #4873
Audio client logs already cover audio session progress the way we need.
This avoids keepAlive and other unnecessary messages to be logged in browser's console.
If setting is not present, default value is set to false.
This was added as an option (websocketKeepAliveInterval), which is the interval to send keep alive messages.
Setting websocketKeepAliveInterval to 0 disables the keep alive, producing the same old behavior.
This helps avoid websocket disconnection due to socket inactivity, preventing it to unnecessarily reconnect.
Also, sometimes reconnect fails and error 1005 is triggered.
Fixes problems reported in #10985.
Also reduces occurrences of error 1005.
Added new SFU broker for screen sharing
Removed kurento-extension entirely
Added inbound and outbound reconnection procedures
Improve UI responsiveness when sharing
Add reconnection UI states
Redo error handling
Refactor actions-bar screen share components. Make it smarter with less prop drilling and less re-rendering. Also more readable. Still work to do in that I think
Add a connection retry procedure for screen presenters when they are sharing; try a configurable amount of times when failure is triggered, with configurable min and max reconn timeouts and timeout increase factor
Make local preview attachment smarter
ADD PARTIAL SUPPORT FOR AUDIO SHARING VIA SCREEN SHARING WITH GET DISPLAY MEDIA, RECORDING STILL NOT SUPPORTED!!!
Fixed listen only reconnection handling
Added proper error handling; now all errors have proper mapped codes which are funneled through to audio-manager logger and should be easier to gauge types of errors
Fixed botched reconnection error rejection, audio modal shouldnt be stuck anymore when it fails
Remove every tie that listen only bridge had to kurento-extension
