It was previously trying to get the presentation name from the wrong variable,
which resulted in a nil value (which was treated as a blank string in
filenames). This caused the poll images to not be inside the presentation
subdirectories, and the poll image references in the svg contained a `//`
path, which would break the recording if it was uploaded to e.g. AWS S3.
This fixes font scaling in the presentation area, since that relied on
the <p> element inheriting the font size from the svg <g> that it was
inside of.
This was broken with the switch to the Foundation stylesheet base, which
set a fixed font size on the <p> element.
In some cases, we get DRAW_END events for pencil shapes from the
html5 client that have no dataPoints. The only thing we can really
do here is detect the issue and ignore the shape.
In some cases, this may result in the shape's intermediate drawing
updates being shown, but it'll disappear when the end event happens.
The archive_dir can by the raw recording directory in some recording
formats - including, hopefully, presentation at some point (to avoid the
extra copy)
The previous calculation used the video size in pixels, which might lead
to stretched/squashed videos in rare cases where the video has non-square
pixels. The new calculation is correct for all video sizes.
The ffprobe command in ffmpeg 4.0 now omits the aspect ratio fields in the
json output when indeterminate, instead of returning an invalid value with
0 in the numerator or denominator. Handle this correctly.
- some conflicts have been fixed.
The following needs working on:
both modified: ../bigbluebutton-client/src/org/bigbluebutton/modules/chat/services/ChatCopy.as
both modified: ../bigbluebutton-client/src/org/bigbluebutton/modules/chat/services/ChatSaver.as
both modified: ../bigbluebutton-client/src/org/bigbluebutton/modules/chat/views/ChatTab.mxml
both modified: ../bigbluebutton-client/src/org/bigbluebutton/modules/chat/views/ChatWindowEventHandler.as
both modified: ../bigbluebutton-client/src/org/bigbluebutton/modules/users/services/MessageReceiver.as
both modified: ../bigbluebutton-client/src/org/bigbluebutton/modules/users/services/MessageSender.as
both modified: ../bigbluebutton-client/src/org/bigbluebutton/modules/users/views/MediaItemRenderer.mxml
Parking as need to work on something else.
Since the update to the newer red5, seeking in flv files (webcams in
particular are noticable) has been broken, resulting in cameras
appearing to "hang" any time there is a cut in the generated video -
which happens when start/stop button is pushed, or when cameras are
added or removed.
We can detect the problematic video files because the timestamp of the
first frame is large (old red5 versions always set first frame
timestamp to 0.001 seconds). If we see a file like this, having ffmpeg
remux the file - rewriting the timestamps and index - works around the
problem.
Due to improvements in the recording scripts, most of the stuff the sanity
script was checking for is no longer needed (missing/corrupt video files
are handled by the processing scripts). The version of this script in
master has been cleaned up so that the only things it does are:
- Check that the events.xml exists and is properly formatted xml
- Rebuild flv files from red5 .flv.ser/.flv.info files
The script from master is compatible with the 2.0 code, so just use it
as-is.
This fixes a problem where following the recent red5 upgrade in 2.0 branch,
an flv file is never written for webcam streams where no frames were
received, despite there being recording events.
This improves the quality of portrait documents, before they were
1200px when landscape documents got 1600px.
Switching to scaling to a square means that we can use the "-scale-to"
option on pdftocaio, which means that it generates images directly
at the desired size. This can save quite a bit of time (and memory)
if a document was uploaded with extremely large page size.
There's some cases where you can get 0-duration recordings due to
recording event placement (e.g. a single recording event is the last
event in the events.xml). Detect these cases, and treat them like
no recording marks in the archive script (it will stop the recording
from being automatically processed).
I've also adjusted the sanity script to detect these cases and error
out. The recording processing scripts cannot handle 0-length recordings,
you have to manually edit the events. I've added a message to the
sanity log about this.
In some cases (due to network issues), the webcam video can be shorter
than the time between the start/stop events. Pad the input video with a
blank video to make sure that there's input to the video tiling filters,
to fix a problem where the video won't render correctly with ffmpeg v3.4
and later.
In some cases (due to network issues), the webcam video can be shorter
than the time between the start/stop events. Pad the input video with a
blank video to make sure that there's input to the video tiling filters,
to fix a problem where the video won't render correctly with ffmpeg v3.4
and later.
In some cases when there is a slight mismatch between audio file
duration and event timestamp difference, and we have a record
status or chapter break event in a certain location, it could
trigger a seek past the end of an audio file. Detect this
condition and just render silence instead.
Also adjust the thresholds for the audio length scaling - they
were being triggered on short recordings that should be correct.
In some cases when there is a slight mismatch between audio file
duration and event timestamp difference, and we have a record
status or chapter break event in a certain location, it could
trigger a seek past the end of an audio file. Detect this
condition and just render silence instead.
Also adjust the thresholds for the audio length scaling - they
were being triggered on short recordings that should be correct.
With the current segment processing, we might be processing one segment
while archiving a different segment from the same recording. To avoid
that the processing scripts see an incomplete events.xml file, write to
a temp file then rename.
Red5 sometimes writes webcam video files with a large offset in the
video frame offsets, sometimes up to 30 or even 60 seconds. However,
the start event in the events.xml file corresponds to the time at
which red5 received the first keyframe (recorded frame) in the video.
The end result is that the video will sometimes appear to be
delayed (out of sync) in the processed recording.
The correction is simple: We're already reading video metadata,
including the timestamp of the first frame, so we just have to apply
a correction during video processing to undo the frame timestamp
offsets in the video file.
Red5 sometimes writes webcam video files with a large offset in the
video frame offsets, sometimes up to 30 or even 60 seconds. However,
the start event in the events.xml file corresponds to the time at
which red5 received the first keyframe (recorded frame) in the video.
The end result is that the video will sometimes appear to be
delayed (out of sync) in the processed recording.
The correction is simple: We're already reading video metadata,
including the timestamp of the first frame, so we just have to apply
a correction during video processing to undo the frame timestamp
offsets in the video file.
When working with the segmented recording format, the events file might
end with a mismatched start video event for an incomplete file. The
sanity script was removing this event, meaning the video didn't show up
in future segments.
Simply drop the code that tries to find invalid video files and removes
them from the events file. The new video processing code is already
robust against missing or corrupt files.
If no audio files were found, it was running rsync with one argument,
which is a bit unexpected. It just printed a file list in this case, but
we can provide a cleaner error message instead.
It previously checked whether any part of the entire meeting was recorded.
Helper functions are added to look up the time of segment start and end
(which handle non-segmented recordings correctly too).
Part of the events handling code was rewritten to reduce the number of times
that the events.xml file gets parsed.
If you're inserting at position 0 (and there was no previous deleted text
from that position), you can't use the timestamp from the previous character
position, since there's no previous character. Use the timestamp of the
following character instead.
In some unusual cases, the recording start can be the last event in the
events file, or at least have the same timestamp as such.
Add some code to check the array bounds and break if needed, so we
don't check the timestamp on the (non-existant) event after the last
event.
The previous code looked for stop events and tried to find their
associated start event. This obviously doesn't work if there was
no stop event. But if there was a start event, we need to show the
deskshare… so rework to code to try to find the matching stop to each
start instead, and use the end of the meeting if no matching stop was
found.
Some old recordings might have invalid or legacy encoding stuff
in the text files. To allow processing to continue, just re-encode int
UTF-8 with the invalid option set to replace, to remove the invalid
characters.
In BBB 2.0, the cursor positions are given relative to the page
size (like annotation positions). Since the recording cursors
aren't actually drawn in the page like annotations, it's more
convenient to have them relative to the visible area (viewbox),
so do that conversion.
While I'm in here - since we switched to new incompatible scripts
for BBB 2.0 anyways - remove an extra factor in the cursor positions
in cursor.xml, and just use a simple ratio of width/height instead.
