bigbluebutton-Github/bigbluebutton-html5/imports/ui/components/audio/audio-settings/component.jsx

588 lines
18 KiB
React
Raw Normal View History

import React from 'react';
import PropTypes from 'prop-types';
import { defineMessages, injectIntl } from 'react-intl';
2022-02-15 04:20:50 +08:00
import Button from '/imports/ui/components/common/button/component';
import AudioTestContainer from '/imports/ui/components/audio/audio-test/container';
2021-11-09 22:33:40 +08:00
import Styled from './styles';
import logger from '/imports/startup/client/logger';
import AudioStreamVolume from '/imports/ui/components/audio/audio-stream-volume/component';
import LocalEchoContainer from '/imports/ui/components/audio/local-echo/container';
import DeviceSelector from '/imports/ui/components/audio/device-selector/component';
import MediaStreamUtils from '/imports/utils/media-stream-utils';
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
import AudioManager from '/imports/ui/services/audio-manager';
import Session from '/imports/ui/services/storage/in-memory';
import AudioCaptionsSelectContainer from '../audio-graphql/audio-captions/captions/component';
const propTypes = {
2021-08-09 22:24:02 +08:00
intl: PropTypes.shape({
formatMessage: PropTypes.func.isRequired,
}).isRequired,
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
animations: PropTypes.bool,
changeInputDevice: PropTypes.func.isRequired,
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
liveChangeInputDevice: PropTypes.func.isRequired,
changeOutputDevice: PropTypes.func.isRequired,
handleBack: PropTypes.func.isRequired,
handleConfirmation: PropTypes.func.isRequired,
handleGUMFailure: PropTypes.func.isRequired,
isConnecting: PropTypes.bool.isRequired,
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
isConnected: PropTypes.bool.isRequired,
isMuted: PropTypes.bool.isRequired,
toggleMuteMicrophoneSystem: PropTypes.func.isRequired,
inputDeviceId: PropTypes.string.isRequired,
outputDeviceId: PropTypes.string.isRequired,
produceStreams: PropTypes.bool,
withEcho: PropTypes.bool,
notify: PropTypes.func.isRequired,
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
unmuteOnExit: PropTypes.bool,
doGUM: PropTypes.func.isRequired,
getAudioConstraints: PropTypes.func.isRequired,
checkMicrophonePermission: PropTypes.func.isRequired,
supportsTransparentListenOnly: PropTypes.bool.isRequired,
toggleVoice: PropTypes.func.isRequired,
permissionStatus: PropTypes.string,
isTranscriptionEnabled: PropTypes.bool.isRequired,
skipAudioOptions: PropTypes.func.isRequired,
};
const defaultProps = {
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
animations: true,
produceStreams: false,
withEcho: false,
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
unmuteOnExit: false,
permissionStatus: null,
};
const intlMessages = defineMessages({
testSpeakerLabel: {
id: 'app.audio.audioSettings.testSpeakerLabel',
description: 'Test speaker label',
},
captionsSelectorLabel: {
id: 'app.audio.captions.speech.title',
description: 'Audio speech recognition title',
},
backLabel: {
id: 'app.audio.backLabel',
description: 'audio settings back button label',
},
micSourceLabel: {
id: 'app.audio.audioSettings.microphoneSourceLabel',
description: 'Label for mic source',
},
speakerSourceLabel: {
id: 'app.audio.audioSettings.speakerSourceLabel',
description: 'Label for speaker source',
},
streamVolumeLabel: {
id: 'app.audio.audioSettings.microphoneStreamLabel',
description: 'Label for stream volume',
},
2017-10-05 04:49:11 +08:00
retryLabel: {
id: 'app.audio.joinAudio',
description: 'Confirmation button label',
2017-09-29 21:38:10 +08:00
},
deviceChangeFailed: {
id: 'app.audioNotification.deviceChangeFailed',
description: 'Device change failed',
},
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
confirmLabel: {
id: 'app.audio.audioSettings.confirmLabel',
description: 'Audio settings confirmation button label',
},
cancelLabel: {
id: 'app.audio.audioSettings.cancelLabel',
description: 'Audio settings cancel button label',
},
findingDevicesTitle: {
id: 'app.audio.audioSettings.findingDevicesTitle',
description: 'Message for finding audio devices',
},
noMicSelectedWarning: {
id: 'app.audio.audioSettings.noMicSelectedWarning',
description: 'Warning when no mic is selected',
},
baseSubtitle: {
id: 'app.audio.audioSettings.baseSubtitle',
description: 'Base subtitle for audio settings',
},
});
class AudioSettings extends React.Component {
constructor(props) {
super(props);
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
const {
inputDeviceId,
outputDeviceId,
unmuteOnExit,
permissionStatus,
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
} = props;
this.handleInputChange = this.handleInputChange.bind(this);
this.handleOutputChange = this.handleOutputChange.bind(this);
this.handleConfirmationClick = this.handleConfirmationClick.bind(this);
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
this.handleCancelClick = this.handleCancelClick.bind(this);
this.unmuteOnExit = this.unmuteOnExit.bind(this);
this.updateDeviceList = this.updateDeviceList.bind(this);
2017-10-04 04:42:10 +08:00
this.state = {
inputDeviceId,
outputDeviceId,
// If streams need to be produced, device selectors and audio join are
// blocked until at least one stream is generated
producingStreams: props.produceStreams,
stream: null,
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
unmuteOnExit,
audioInputDevices: [],
audioOutputDevices: [],
findingDevices: permissionStatus === 'prompt' || permissionStatus === 'denied',
};
this._isMounted = false;
}
componentDidMount() {
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
const {
inputDeviceId,
outputDeviceId,
} = this.state;
const {
isConnected,
isMuted,
toggleMuteMicrophoneSystem,
checkMicrophonePermission,
toggleVoice,
permissionStatus,
} = this.props;
Session.setItem('inEchoTest', true);
this._isMounted = true;
// Guarantee initial in/out devices are initialized on all ends
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
AudioManager.isEchoTest = true;
checkMicrophonePermission({ gumOnPrompt: true, permissionStatus })
.then(this.updateDeviceList)
.then(() => {
if (!this._isMounted) return;
navigator.mediaDevices.addEventListener(
'devicechange',
this.updateDeviceList,
);
this.setState({ findingDevices: false });
this.setInputDevice(inputDeviceId);
this.setOutputDevice(outputDeviceId);
});
// If connected and unmuted, we need to mute the audio and revert it
// back to the original state on exit.
if (isConnected && !isMuted) {
toggleMuteMicrophoneSystem(isMuted, toggleVoice);
// We only need to revert the mute state if the user is not listen-only
if (inputDeviceId !== 'listen-only') this.setState({ unmuteOnExit: true });
}
}
componentDidUpdate(prevProps) {
const { permissionStatus } = this.props;
if (prevProps.permissionStatus !== permissionStatus) {
this.updateDeviceList();
}
}
componentWillUnmount() {
const { stream } = this.state;
Session.setItem('inEchoTest', false);
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
this._isMounted = false;
if (stream) {
MediaStreamUtils.stopMediaStreamTracks(stream);
}
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
AudioManager.isEchoTest = false;
navigator.mediaDevices.removeEventListener(
'devicechange', this.updateDeviceList,
);
this.unmuteOnExit();
}
2017-10-23 20:41:09 +08:00
handleInputChange(deviceId) {
this.setInputDevice(deviceId);
}
handleOutputChange(deviceId) {
this.setOutputDevice(deviceId);
}
handleConfirmationClick() {
const { stream, inputDeviceId: selectedInputDeviceId } = this.state;
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
const {
isConnected,
produceStreams,
handleConfirmation,
liveChangeInputDevice,
} = this.props;
const confirm = () => {
// Stream generation disabled or there isn't any stream: just run the provided callback
if (!produceStreams || !stream) return handleConfirmation();
// Stream generation enabled and there is a valid input stream => call
// the confirmation callback with the input stream as arg so it can be used
// in upstream components. The rationale is no surplus gUM calls.
// We're cloning it because the original will be cleaned up on unmount here.
const clonedStream = stream.clone();
return handleConfirmation(clonedStream);
};
if (isConnected) {
// If connected, we need to use the in-call device change method so that all
// components pick up the change and the peer is properly updated.
liveChangeInputDevice(selectedInputDeviceId).catch((error) => {
logger.warn({
logCode: 'audiosettings_live_change_device_failed',
extraInfo: {
errorMessage: error?.message,
errorStack: error?.stack,
errorName: error?.name,
},
}, `Audio settings live change device failed: ${error.name}`);
}).finally(() => {
confirm();
});
} else {
confirm();
}
}
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
handleCancelClick() {
const { handleBack } = this.props;
handleBack();
}
setInputDevice(deviceId) {
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
const {
isConnected,
handleGUMFailure,
changeInputDevice,
produceStreams,
intl,
notify,
} = this.props;
const { inputDeviceId: currentInputDeviceId } = this.state;
try {
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
if (!isConnected) changeInputDevice(deviceId);
// Only generate input streams if they're going to be used with something
// In this case, the volume meter or local echo test.
if (produceStreams) {
this.setState({
producingStreams: true,
});
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
this.generateInputStream(deviceId).then((stream) => {
// Extract the deviceId again from the stream to guarantee consistency
// between stream DID vs chosen DID. That's necessary in scenarios where,
// eg, there's no default/pre-set deviceId ('') and the browser's
// default device has been altered by the user (browser default != system's
// default).
let extractedDeviceId = deviceId;
if (stream) {
extractedDeviceId = MediaStreamUtils.extractDeviceIdFromStream(stream, 'audio');
if (extractedDeviceId !== deviceId && !isConnected) {
2023-07-25 02:56:40 +08:00
changeInputDevice(extractedDeviceId);
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
}
}
// Component unmounted after gUM resolution -> skip echo rendering
if (!this._isMounted) return;
2023-07-25 02:56:40 +08:00
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
this.setState({
inputDeviceId: extractedDeviceId,
stream,
});
// Update the device list after the stream has been generated.
// This is necessary to guarantee the device list is up-to-date, mainly
// in Firefox as it omit labels if no active stream is present (even if
// gUM permission is flagged as granted).
this.updateDeviceList();
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
}).catch((error) => {
logger.warn({
logCode: 'audiosettings_gum_failed',
extraInfo: {
deviceId,
errorMessage: error.message,
errorName: error.name,
},
}, `Audio settings gUM failed: ${error.name}`);
handleGUMFailure(error);
}).finally(() => {
// Component unmounted after gUM resolution -> skip echo rendering
if (!this._isMounted) return;
this.setState({
producingStreams: false,
});
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
});
} else {
this.setState({
inputDeviceId: deviceId,
});
}
} catch (error) {
2023-07-25 02:56:40 +08:00
logger.debug(
{
logCode: 'audiosettings_input_device_change_failure',
extraInfo: {
errorName: error.name,
errorMessage: error.message,
deviceId: currentInputDeviceId,
newDeviceId: deviceId,
},
},
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
`Audio settings: error changing input device - {${error.name}: ${error.message}}`,
2023-07-25 02:56:40 +08:00
);
notify(intl.formatMessage(intlMessages.deviceChangeFailed), true);
}
}
setOutputDevice(deviceId) {
const { outputDeviceId: currentOutputDeviceId } = this.state;
const {
changeOutputDevice,
withEcho,
intl,
notify,
} = this.props;
// withEcho usage (isLive arg): if local echo is enabled we need the device
// change to be performed seamlessly (which is what the isLive parameter guarantees)
2023-07-25 02:56:40 +08:00
changeOutputDevice(deviceId, withEcho)
.then(() => {
this.setState({
outputDeviceId: deviceId,
});
})
.catch((error) => {
logger.debug({
logCode: 'audiosettings_output_device_change_failure',
extraInfo: {
errorName: error.name,
errorMessage: error.message,
deviceId: currentOutputDeviceId,
newDeviceId: deviceId,
2023-07-25 02:56:40 +08:00
},
}, `Audio settings: error changing output device - {${error.name}: ${error.message}}`);
2023-07-25 02:56:40 +08:00
notify(intl.formatMessage(intlMessages.deviceChangeFailed), true);
});
}
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
updateDeviceList() {
return navigator.mediaDevices.enumerateDevices()
.then((devices) => {
const audioInputDevices = devices.filter((i) => i.kind === 'audioinput');
const audioOutputDevices = devices.filter((i) => i.kind === 'audiooutput');
this.setState({
audioInputDevices,
audioOutputDevices,
});
})
.catch((error) => {
logger.warn({
logCode: 'audiosettings_enumerate_devices_error',
extraInfo: {
errorName: error.name,
errorMessage: error.message,
},
}, `Audio settings: error enumerating devices - {${error.name}: ${error.message}}`);
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
});
}
unmuteOnExit() {
const { toggleMuteMicrophoneSystem, toggleVoice } = this.props;
const { unmuteOnExit } = this.state;
// Unmutes microphone if flagged to do so
if (unmuteOnExit) toggleMuteMicrophoneSystem(true, toggleVoice);
}
generateInputStream(inputDeviceId) {
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
const { doGUM, getAudioConstraints } = this.props;
const { stream } = this.state;
if (inputDeviceId && stream) {
const currentDeviceId = MediaStreamUtils.extractDeviceIdFromStream(stream, 'audio');
if (currentDeviceId === inputDeviceId) return Promise.resolve(stream);
MediaStreamUtils.stopMediaStreamTracks(stream);
}
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
if (inputDeviceId === 'listen-only') return Promise.resolve(null);
const constraints = {
audio: getAudioConstraints({ deviceId: inputDeviceId }),
};
return doGUM(constraints, true);
}
renderAudioCaptionsSelector() {
const { intl, isTranscriptionEnabled } = this.props;
if (!isTranscriptionEnabled) return null;
return (
<Styled.FormElement>
<Styled.LabelSmall htmlFor="audioSettingsCaptionsSelector">
{intl.formatMessage(intlMessages.captionsSelectorLabel)}
<AudioCaptionsSelectContainer showTitleLabel={false} />
</Styled.LabelSmall>
</Styled.FormElement>
);
}
renderDeviceSelectors() {
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
const {
inputDeviceId,
outputDeviceId,
producingStreams,
audioInputDevices,
audioOutputDevices,
findingDevices,
} = this.state;
const {
intl,
isConnecting,
supportsTransparentListenOnly,
withEcho,
} = this.props;
const { stream } = this.state;
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
const blocked = producingStreams || isConnecting || findingDevices;
return (
<>
<Styled.FormElement>
<Styled.LabelSmall htmlFor="inputDeviceSelector">
{intl.formatMessage(intlMessages.micSourceLabel)}
<DeviceSelector
id="inputDeviceSelector"
deviceId={inputDeviceId}
devices={audioInputDevices}
kind="audioinput"
blocked={blocked}
onChange={this.handleInputChange}
intl={intl}
supportsTransparentListenOnly={supportsTransparentListenOnly}
/>
</Styled.LabelSmall>
</Styled.FormElement>
<Styled.LabelSmallFullWidth htmlFor="audioStreamVolume">
{intl.formatMessage(intlMessages.streamVolumeLabel)}
<AudioStreamVolume stream={stream} />
</Styled.LabelSmallFullWidth>
<Styled.FormElement>
<Styled.LabelSmall htmlFor="outputDeviceSelector">
{intl.formatMessage(intlMessages.speakerSourceLabel)}
<DeviceSelector
id="outputDeviceSelector"
deviceId={outputDeviceId}
devices={audioOutputDevices}
kind="audiooutput"
blocked={blocked}
onChange={this.handleOutputChange}
intl={intl}
supportsTransparentListenOnly={supportsTransparentListenOnly}
/>
</Styled.LabelSmall>
</Styled.FormElement>
<Styled.LabelSmall htmlFor="audioTest">
{intl.formatMessage(intlMessages.testSpeakerLabel)}
{!withEcho ? (
<AudioTestContainer id="audioTest" />
) : (
<LocalEchoContainer intl={intl} stream={stream} />
)}
</Styled.LabelSmall>
{this.renderAudioCaptionsSelector()}
</>
);
}
renderAudioNote() {
const {
animations,
intl,
} = this.props;
const { findingDevices, inputDeviceId: selectedInputDeviceId } = this.state;
let subtitle = intl.formatMessage(intlMessages.baseSubtitle);
if (findingDevices) {
subtitle = intl.formatMessage(intlMessages.findingDevicesTitle);
} else if (selectedInputDeviceId === 'listen-only') {
subtitle = intl.formatMessage(intlMessages.noMicSelectedWarning);
}
return (
<Styled.AudioNote>
<span>{subtitle}</span>
{findingDevices && <Styled.FetchingAnimation animations={animations} />}
</Styled.AudioNote>
);
}
render() {
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
const {
producingStreams,
} = this.state;
const {
isConnecting,
isConnected,
skipAudioOptions,
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
intl,
} = this.props;
return (
<Styled.FormWrapper data-test="audioSettingsModal">
{this.renderAudioNote()}
<Styled.Form>
{this.renderDeviceSelectors()}
</Styled.Form>
<Styled.BottomSeparator />
2021-11-09 22:33:40 +08:00
<Styled.EnterAudio>
<Styled.BackButton
label={(isConnected || skipAudioOptions())
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
? intl.formatMessage(intlMessages.cancelLabel)
: intl.formatMessage(intlMessages.backLabel)}
color="secondary"
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
onClick={this.handleCancelClick}
2017-09-29 21:38:10 +08:00
disabled={isConnecting}
/>
2017-09-29 21:38:10 +08:00
<Button
data-test="joinEchoTestButton"
size="md"
color="primary"
feat(audio): rework audio join without listen only This is a rework of the audio join procedure whithout the explict listen only separation in mind. It's supposed to be used in conjunction with the transparent listen only feature so that the distinction between modes is seamless with minimal server-side impact. An abridged list of changes: - Let the user pick no input device when joining microphone while allowing them to set an input device on the fly later on - Give the user the option to join audio with no input device whenever we fail to obtain input devices, with the option to try re-enabling them on the fly later on - Add the option to open the audio settings modal (echo test et al) via the in-call device selection chevron - Rework the SFU audio bridge and its services to support adding/removing tracks on the fly without renegotiation - Rework the SFU audio bridge and its services to support a new peer role called "passive-sendrecv". That role is used by dupled peers that have no active input source on start, but might have one later on. - Remove stale PermissionsOverlay component from the audio modal - Rework how permission errors are detected using the Permissions API - Rework the local echo test so that it uses a separate media tag rather than the remote - Add new, separate dialplans that mute/hold FreeSWITCH channels on hold based on UA strings. This is orchestrated server-side via webrtc-sfu and akka-apps. The basic difference here is that channels now join in their desired state rather than waiting for client side observers to sync the state up. It also mitigates transparent listen only performance edge cases on multiple audio channels joining at the same time. The old, decoupled listen only mode is still present in code while we validate this new approach. To test this, transparentListenOnly must be enabled and listen only mode must be disable on audio join so that the user skips straight through microphone join.
2024-06-05 19:26:27 +08:00
label={isConnected
? intl.formatMessage(intlMessages.confirmLabel)
: intl.formatMessage(intlMessages.retryLabel)}
onClick={this.handleConfirmationClick}
disabled={isConnecting || producingStreams}
2017-10-05 04:49:11 +08:00
/>
2021-11-09 22:33:40 +08:00
</Styled.EnterAudio>
</Styled.FormWrapper>
2017-09-29 21:42:08 +08:00
);
}
2017-06-03 03:25:02 +08:00
}
AudioSettings.propTypes = propTypes;
AudioSettings.defaultProps = defaultProps;
export default injectIntl(AudioSettings);